Database access after deleting user "Administrator"?

Dear community,
we run Oracle 11g (11.1) on Windows Server 2008 R2.
What we did is activating "Active directory domain services" role on our server to create a domain; the machine was promoted to domain controller of that domain and all formerly local users became domain users (that's normal). Now we want to remove the Active Directory what leads to the following: the domain controller will be demoted to a workgroup server; all domain users will be deleted and we have to recreate them (which is okay because there is just a handful of them).
Now my question:
The user we created our database with, i.d. our formerly local user "Administrator", which is now a domain user, will amongst all other users be deleted and then be recreated as a local user. Will that have any impact on using the database application? Will the new user have exactly the same rights as the old local Admin user and will all be as it was before? Or does deleting and recreating him do any harm using the database?
A qualified answer would be highly appreciated!
Regards
Karl
Edited Oracle version.
Edited by: 903954 on Dec 22, 2011 12:35 AM

903954 wrote:
Now my question:
The user we created our database with, i.d. our formerly local user "Administrator", which is now a domain user, will amongst all other users be deleted and then be recreated as a local user. Will that have any impact on using the database application? Sure it will.
Create an oracle user and grant rights to access the oracle directories and binaries.
check the ability to start binaries and assign oracle service to run under this user.
And at last, make a try at test enviroment

Similar Messages

Getting error for opening shopping cart after deleting user fron org struct

Hi Experts
I am getting dump user attribute not maintained after deleting user assignment from org structure.
what can i do to retain old status. or atleas wants to avoid getting this dump ..while displaying this SC.
pl provide any solution
Regards
Nilesh,

It is never a good idea to just delete a user assignment. What I find is that people just go on deleting assignments without considering the consequences. And later on it gives a lot of trouble to correct errors.
So never delete an assignment, but give it an end date (it's there for a reason!).
On to your problem: as said by someone else, get the user/business partner back into the organisational model (doesn't matter where actually) and there won't be an error. Try first with ppoma_bbp, if that doesn't work use pp01 - use pp01 with care and know exactly what you want to achieve else you'll end up creating a bigger mess than you started with.
If you have deleted the business partner completely you will have to update the database by hand hacking tables (a big reason never to delete a bp you are not entirely sure about).
Regards,
Robin

Error in the Navigation Cache after deleting user

Hi,
We have an issue with the navigation cache and deleted users. If we delete a user and then tries to log on with a user with the same set of roles as the deleted user, the navigation cache throws an exception
User USER.PRIVATE_DATASOURCE.un:z_deleteduser doesn't exist!.
There is no relation between z_deleteduser and the user we logged on with when getting the exception.
My guess is that the deleted user was the first user with that set of roles that logged in after last time we cleared the cache, and therefore got used as a key to that particular navigation object.
Does anyone know how to resolve this, I don't want to empty the cache each time we delete a user?
Regards
Mattias

Hi,
It seems the guided procedure throws the same exception, which makes sense. I don't have a WAS up and running here, so I can't test, but I guess it's the exception the UME throws if you try to access an non existing user, and it just gets propagated both by the Navigation Cache and Guided Procedures.
But there has to be a fix for it, somewhere...
Regards
Mattias

7.01 to 7.3 Upgrade - Users lost access to Delegaed User Administration

Hi all
After upgrading our portal from 7.01 to 7.3 have (specific) users lost access to display information (roles etc) about other users in the Delegated User Administraion area (Content Author --> Delegated User Administration).
Does anybody know how this access can be given again?
Thanks.

After a long running OSS SAP found the solution.
1. http://server:port/irj/servlet/prt/portal/prtroot/com.sap.portal.themes.integrity.update?themetype=portal
2. Select u201Cdefaultu201D for browser and u201CparPrtlMastHeadNotchBgColoru201D for parameter
3. Change the value from #E2D575 to #FFFFFF, press u201CSet Valueu201D and then u201CSave and Generateu201D

Exchange management console not able to access after rename the administrative AD account

I had an administrative user account(AD Admin a/c) KXP004 that
recently rename as RPS001
The account which was working fine before renaming and was able to access the exchange console. Since I rename the account, everything is working fine except the exchange management
console.
When trying to access the EX Management console displays an error message saying it cannot find the new name. What can we do to make the exchange management
console work for the renamed account? Please assist.

Hi Sherieftkl,
After renaming the administrator account in AD, did you log off and then log on by using the new administrator name? Please log on again and monitor the result.
In addition, please also open Event Viewer and check if find some related events.
-->Since I rename the account, everything is working fine except the exchange management console.
By the way, if this issue just occurred for EMC, I also suggest that you should post the question in
Exchange Forum. I believe we will get a better assistance there.
Best regards,
Justin Gu
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Why did my hard drive fill up after deleting user?

I have been trying to reduce the size of the Mac HD. I had 3 user accounts. I deleted one of them (saving a disk image in Deleted Users and the size of the HD seemed the same as before.
Then I deleted a second one (saving the disk image in the users folder) and I checked Disk Utility. I found that I had much less room than before on the HD.

I checked the Deleted Users folder.
It had two files.
Here is the list:
I presume the discrepancies in size are because "honeybear.dmg" is the account I created when I first got the computer (and I didn't add many files to it before I opened another account) and "yk.dmg" was the account I created by cloning the Mac HD of the other computer and migrating it over.
Why is "honeybear.dmg" labeled as a disk image and "yk.dmg" not labeled as a disk image?

After deleting users they are not removed from portal30.wwsec_person

I am building a customized script to carry on users self registration.
the script is going great and user is created and i can log into portal
successfully with this new created user.
I relogin as portal administrator and delete this new user and now if i tried
to list portal users I cant see the user.
But when I try to rerun my script to recreate this user again it fails when I
investigated I found that it fails because the entry of this user is removed
from portal30_sso.wwsec_person while it still exists in portal30.wwsec_person
so the script fails as there is duplicate in primary key.
Is this a bug in portal 309 that when the user is deleted it is not removed
from portal30.wwsec_person

This is actually a combination of intended behavior/design and a bug.
Let me first explain why there is a user in both the PORTAL30_SSO schema as well as the PORTAL30 schema.
The definition of the user, that can log in, and defines the single sign-on account, is the user's entry in the
WWSEC_PERSON$ table in the PORTAL30_SSO schema. The SSO server actually just uses a subset of the
columns in this table -- those defined in the WWSSO_SSO_USER view.
The same table exists in the PORTAL30 schema, because there is a lot of common infrastructure code
shared by both applications (Login Server, and Portal). The Security and Session Management code
is common, and this code includes the dependency on the WWSEC_PERSON$ table.
Now, assuming that the code was independent (for the sake of argument), why do we still have an entry
for the user in both schemas? As I mentioned earlier, the user entry in the SSO schema is the "master".
The SSO server can have multiple partner applications connected to it. Indeed, on my.oracle.com, the
login server there has at least 4 portals hooked up to it, and a few other non-Portal partner applications,
such as Oracle Mobile.
Each partner application may have a local user profile that it uses to store application specific attributes
of the user. This is stuff that the Login Server is not interested in, and could in no way predetermine for
all conceivable partner applications. So, it is not unreasonable for each partner application to also have
a user record which stores additional attributes of the user (not related to user authentication), and which
can be used to reference other user-related data. For example in the Portal, all the user's privileges
and group memberships are tied to the Portal's user record (foreign key constraints). So, the Portal
being just one partner application of the Login Server, it adhere's to this model and has a user entry
in it's schema corresponding to the user entry in the Login Server.
When a user logs on and accesses a partner application for the first time, the partner application (read Portal)
is expected to automatically create a local profile entry for the user on demand. The Portal does this.
In 3.0.9 and previous versions, to delete a user, you need to delete the user in the Login Server AND the Portal.
The only way to do this is to first delete the user in the Login Server, using the User Portlet.
Then type the user's name into the Portal User Profile portlet (they won't be in the LOV anymore since
you just deleted them from the login server), and click Edit, then Reset To Defaults (this means delete).
You will then get a User Not Found error, since the page is trying to go back to show the details about this user.
(All this has been fixed in 9.0.2 v2, by the way).

Database Access in limited user account

I have made an application in which I am communicating with database.
Let me explain about my application first.
1. Application starts and it asks for user name and password
2. After successful login data reading or writing from /to database.
All this information whether its data or user name or password, I am storing in same database but in different tables
Now If I login from limited user then I am able to login by entering user name and password but later I am not able to read/ write to database, but If I login from admin accout then everything runs smoothly.
This happened recently and I am sure this is permision issue..
Kudos are always welcome if you got solution to some extent.
I need my difficulties because they are necessary to enjoy my success.
--Ranjeet

SQL?? MySQL, MS SQL Server, Oracle SQL, PostgreSQL, SQLLite, .......
ADO driver you use?
versions of SQL server and ADO drivers?
There is obviously some security! If there wasn't any you would not get andy trouble to connect to your server with a normal user account.
Rolf Kalbermatter
CIT Engineering Netherlands
a division of Test & Measurement Solutions

Access database access by other user

Dear All,
I created one schema 'xyz' in a database and creating another new user 'pqr'.
Now I wanted to access of XYZ schema by user 'xyz'. I have given the rights to access of schema 'xyz' to 'pqr'
but when I open any stored procedure of 'xyz' in Pqr by schema name, it is comes in invalid state because database objects which are used in that procedure are not maintain with schema name.
Is anything there, so that I can see all SPs of XYZ in PQR with valid state.
thanks and regards,
Prashant

Now I wanted to access of XYZ schema by user 'xyz'. Did you mean 'pqr' instead of 'xyz' here?
but when I open any stored procedure of 'xyz' in Pqr by schema nameWhere?
>
Is anything there, so that I can see all SPs of XYZ in PQR with valid state.
Not sure if I understand your problem. Are you referring to recompilation of stored procedures of XYZ schema while logged in as PQR?

How to reduce the database size after deleting huge amount of rows?

Hi,
I have a large database. I removed almost half of the data/rows. Now i need to reduce the size of the database file as I need more disk space for the database file.
What should I do in details please.
Thanks.

Hi,
I have a large database. I removed almost half of the data/rows. Now i need to reduce the size of the database file as I need more disk space for the database file.
What should I do in details please.
Thanks.
Deleting large data would have ultimately put ghost cleanup into action. You would not be able to free space using shrink operation untill it completes. So wait for time and then start shrinking. You should note that shrinking would cause fragmentation and
you would have to rebuild indexes after shrinking is completed
Please mark this reply as answer if it solved your issue or vote as helpful if it helped so that other forum members can benefit from it
My Technet Wiki Article
MVP

Database Crash after "alter user"

Hi,
I've a problem with oracle 8i databases on windows 2000 server, clustered (active-passive).
When I try to change sys password as sysdba the instance crashes without error messages in alterlog and without dump files.
ie:
sqlplus /nolog
SQL>conn sys/pwd@db as sysdba
SQL>alter user sys identified by pwd2;
this command works and the password file is updated, but the database cluster resource changed its status to "failed"
Is there a relationship with password file and microsoft cluster service or oralce fail safe?
this don't happens neither in standalone server nor clustered 10g databases

I think yes.
Check MOS FailSafe Database Goes Offline After Changing SYS Password - 167496.1
HTH
-Anantha

Database access by Multiple users

Hi All,
I have a ztable and the user has to access the ztable to find the max of ID to insert the next record. This ID increment was done in coding level. It was working fine when a user hit the DB. If multiple user access the same, it throws the error as duplicate records. How to solve this? Can any one give the soln for this?
Thanks in Advance,
Pon

hi Murugesh,
whenever you are updating the data into table through the report.
you need to lock the table before inserting into the table and unloak after inserting the records into the Table.
locking.
FORM lock_spotter.
LOOP AT gt_spotter INTO gs_spotter.
 CALL FUNCTION 'ENQUEUE_EZSPOTTERS'
 EXPORTING
 mode_zspotters = 'E'
 aktnr = gs_spotter-aktnr
 artnr = gs_spotter-artnr
 mebme = gs_spotter-mebme
 unique_key = gs_spotter-unique_key
 x_aktnr = ' '
 x_artnr = ' '
 x_mebme = ' '
 x_unique_key = ' '
 _scope = '2'
 _wait = ' '
 _collect = 'X'
 EXCEPTIONS
 foreign_lock = 1
 system_failure = 2
 OTHERS = 3.
 IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
 ENDIF.
ENDLOOP.
CALL FUNCTION 'FLUSH_ENQUEUE'
 EXCEPTIONS
 foreign_lock = 1
 system_failure = 2
 OTHERS = 3.
IF sy-subrc <> 0.
 MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
 WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM.
unlocking
LOOP AT gt_spotter INTO gs_spotter.
 CALL FUNCTION 'DEQUEUE_EZSPOTTERS'
 EXPORTING
 mode_zspotters = 'E'
 aktnr = gs_spotter-aktnr
 artnr = gs_spotter-artnr
 mebme = gs_spotter-mebme
 unique_key = gs_spotter-unique_key
 x_aktnr = ' '
 x_artnr = ' '
 x_mebme = ' '
 x_unique_key = ' '
 _scope = '2'
 _wait = ' '
 _collect = ' '
 EXCEPTIONS
 foreign_lock = 1
 system_failure = 2
 OTHERS = 3.
 IF sy-subrc <> 0.
 MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
 ENDIF.
ENDLOOP
hope this will help you.
Regards,
Madhavi

After deleting user account / Unknown user is shown in information ...

After having some troubles with my account, I tried to get rid of it by deleting this account.
So I first edited a new one and after all I removed the old one.
Since this moment I have an UNKNOWN USER without having read/write-priviliges to my disk.
Unfortunately this user is not removable.
Does someone having this problem too?
Some hints about this matter?
Message was edited by: 3lm0

Exactly what did you do to remove your old account? I hope you didn't just drag it to the Trash. If so then you don't have an account because dragging the old Home folder to the Trash is not how you remove an account.
You say you "edited" a new account. How did you do this?

Application Issues after deleting user account

I have an imac with several user accounts setup. two of the accounts are admin.
User1 Admin
User2 Admin
sysadmin Admin
User3 User
User4 User
User5 User
User6 User
User1 purchased a new macbook pro and we migrated all of her docs and applications to the macbook pro. after seeing that everything was working well, we deleted her old account on the imac from the "System Preferences/Accounts" tab from User2's account.
Here's the issue:
Now when User2 tries to install or update applications, the system responds with a permissions error message. You do not have sufficient permissions to modify this application's settings. We also run into stange errors while just using some applications
Most applications on the machine were installed by User1 before deleting the account. Did sysadmin inherit ownership of applications and library settings of User1 upon deletion?
Is there anyway to change the settings for all applications to allow User2 (admin group) to update and install applications? Could I just change the ownership group for sysadmin directories to admin with Read & Write?
Thanks,
LeoK

Exactly what did you do to remove your old account? I hope you didn't just drag it to the Trash. If so then you don't have an account because dragging the old Home folder to the Trash is not how you remove an account.
You say you "edited" a new account. How did you do this?

After deleting Calendar users, their subscriptions still remain, and the server crashes when accessing deleted calendars

After deleting users from iPlanet Calendar Server(iCS), the users'
subscriptions still remain. Then, if a user tries to unsubscribe
from a deleted calendar, the server sometimes crashes, even though sufficient
disk space and memory are available. When checking the HTTP log, the
log shows that certain calendars don't exist.
The solution to this problem is to back up the ics50gse.db
file to another file with a different
name, or remove the file from the db
directory.

If you are upgrading your iCS, make sure the GSE database queue is empty
before you perform the upgrade. To check the GSE database queue,
you can use either of the following commands while the server is either
running or stopped:

csschedule list
OR
csdb -v list

After issuing the command, if nothing is displayed, the GSE queue is empty, and
you can proceed to step 3 below. However, if the queue does contain
items, use the following steps to flush it:

<OL>
<LI>Start the server if the server is in a stopped state.

<LI>Stop only the cshttpd
daemon so that no new requests can
come in.

Note: It should take only a few minutes for the GSE to handle any requests.
Typically, the GSE queue will be empty.

<LI>Shut down iCS.

<LI>Rename the ics50gse.db
file.

<LI>Restart the server.
</OL>

If you have already upgraded the server and are experiencing the above
mentioned problems, use the following steps:

<OL>
<LI>Shut down iCS.

<LI>Rename the ics50gse.db
file.

<LI>Restart the server.
</OL>

I forgot to mention that I've cleared out ~/Library/Caches/ for my test user, as well as deleted the iWeb .plist file.

Database access after deleting user "Administrator"?

Similar Messages

Maybe you are looking for