Datagrid change row event with tab AND/OR click ???

I have a spark datagrid with the last two columns enterable.
The natural approach for the user is to click in one and enter it then keep tabbing from cell to cell row to row to do his/her data entry.
Selectionchanging works only if you click, the selection does not keep up with the tab from row to row.
I want to enter the new data for each row when the user leaves the row.
What is the best way to approach this particular (and common) need.
Thanks
Dan Pride

Hi again,
I think I was not clear enough. Basically I have a textfield assigned with a style, let's say TextFieldStyle1. What I want is to programmatically assign the textfield another style, say, TextFieldStyle2.
How can I achieve that ?
Many thanks !

Similar Messages

Pasting in Numbers cell with tabs and returns

I am converting my old Appleworks SS files to Numbers and it works fine when I just open the .cwk file with Numbers. But when I try to paste in to a cell text with tabs and returns, unlike AW, it puts as much of the text as will fit in one cell, truncating the remainder.
Is there some way to change Numbers preferences (or any other technique) to push text separated with tabs to the next cell right and for returns to push to the next row?

I just figured out what I did wrong. The text I was pasting in was enclosed in quote marks. Once I removed those, it pasted in perfectly, just like AW.

Error -200141 when doing buffered events with DAQmx and PCI-6602

When doing buffered events with DAQmx and PCI-6602 I get error 200141 - Data was overwritten before it could be read by the system.
This error is generated ONLY with random inputs >200/sec.
My setup is :
DAQmxCreateCIVCountEdges(taskhandle,"Dev1/ctr3"....
DAQmxCG+FGSampClkTiming(taskhandle,"/Dev1/FPI35",...
DAQmxSetCICountEgdesChan(taskhandlem,"", "/Dev1/80MHZTimeBase")
DAQmxSetChanAttribute(taskhandlw,",",DAQmx_CI_DataXferMech,DAQmx_Val_DMA,0);
Can somebody help ?

i'm getting the same Error-200141, while reading semiperiods. (Meas_Buffered semiperiod continous)
while loop ex.rate seems to be pulsewidth*no.Samples to read. in my case PW=60ms
Input buffer size measured with Property node= 10000
why this error happens?? i cant use any mode other than implicit timing for semi-period measurement right??
more info: all the ai channels are used ~ 16 differencial.
i found one solution which is _ reinitializing the whole task if an error occur. is this the right way??
Kudos always welcome for helpful posts
Attachments:
Counter_1_Meas Buffered Semi-Period-Continuous_main_lv09.vi ‏34 KB
SemiPeriod_Reconnect Counter on Error.vi ‏35 KB

Is there an option to left click and open a bookmark in the same tab and right click to open bookmark in new tab?

I want to be able to open bookmarks in the same window without having to right click and then select open. I would like it to be like internet explorer where you have the option to open a bookmark in the same tab or new tab. I had downloaded an add on that solved the problem with a simple right click to open in new tab and left click to open in same tab. This makes things soooo much easier. Am I missing an add on or a configuration where I can solve this problem. Thanks for your time.

Very, very, very confusing!!!!! Exactly which is it that you want to do????? Left-click = same tab or left-click = new tab????
Your initial subject line:
'''''Is there an option to left click and open a bookmark in the same tab and right click to open bookmark in new tab?'''''
Your last post (3rd post):
'''''Is there a way I can left click and automatically open a bookmark in a new tab...'''''
'''''''''...rather than having to left click and then select "open in new tab."'''''''''
Right-click, '''not left-click''', has the "Open in new tab option".
Easy answer is listed in my initial reply; left-click, same tab; middle-click, new tab!
What are your Extensions?
-List them.
-You obviously set up some extension with some kind of conflict.
To find out which Extension is causing the problem, '''enable one-at-a-time''', restart Firefox for the change to take effect (File > Restart Firefox), test. When the problem re-appears, you know the extension causing the problem.
See:
'''[[Troubleshooting extensions and themes]]'''
'''[[Troubleshooting plugins]]'''
'''[[Basic Troubleshooting]]'''

Excel is throwing error when it click print : 'No printers are installed. To install a printer click the File tab, and then click Print. Click No Printers Installed, and then click Add Printer. Follow the instructions in the Add Printer dialog box'

Excel is throwing error when it click print : 'No printers are installed. To install a printer click the File tab, and then click Print. Click No Printers Installed, and then click Add Printer. Follow the instructions in the Add Printer dialog box'
Word, and powerpoint application are working fine.
Environment : Windows 7 64-bit, MS Office 2013 64-bit
Steps to recreate
(i) Create new user account and add to any group ( do not log on using this
account)
(ii) runas /user:<new user account> <fullpath>\excel.exe
it will ask password so enter on command prompt
(iii) open any excel document and click File->Print
(iv) verify result (it is failing) it pop ups below error
Error:`Microsoft Excel
No printers are installed. To install a printer click the File tab, and then click
Print. Click No Printers Installed, and then click Add Printer. Follow the
instructions in the Add Printer dialog box.

Sorry for late reply i was not at work
I have a default set excel is still throwing error. Interestingly winword , powerpoint and publisher are working fine. I am able to print from all office applications except Excel.
Probably excel behaves differently from other office applications.
Probably it is a bug in excel
Workaround : Log on to a system once using newly created account then runas excel using this account then print works fine.
It means something in user profile should be configure to run excel print operation. Could you please somebody help what I need to configure in user profile that makes print operation success?

I was in a chat box with skype and I clicked on the link to copy the text but it came back with "can't copy becuse not permitted in your browser"

I was in a chat box with SKYPE and I clicked on the link to copy the text but it came back with "can't copy because not permitted in your browser"
I can highlight copy and paste from other web screens with no problem.
The chat window however doesn't give access to the lines that have scrolled past the window so highlighting the text won't work. Other chat windows grab the entire text when the user clicks on the copy link or icon.
I just installed firefox and haven't tried other chat windows to see if the problem could be repeated.

Use the keyboard if the buttons on the web page aren't working.
* Copy: Ctrl+C or Ctrl+Insert
* Paste: Ctrl+V or Shift+Insert
* Cut: Ctrl+X or Shift+Delete
*http://kb.mozillazine.org/Granting_JavaScript_access_to_the_clipboard

Reordering of rows - issue with drag and drop of editable columns in table

JDeveloper: 11.1.1.6.0
ADF Faces - Drag and Drop for reordering of rows within the same af:table
I have a requirement for reordering rows in a table using drag and drop. This table is loaded using a list and I am able to programmatically do the reordering of the rows based on the events of drag and drop by manipulating the list. Reordering of rows is working fine if all the columns are read only. For all the input text and input date columns the values are not getting reordered. Anyone has any idea on what the issue may be with reordering of the rows for editable columns/rows (af:inputText and af:inputDate) in af:table. Below is what Iam doing on drop event which is a collection drop target.
public DnDAction dropCollection(DropEvent dropEvent) {
try
Object dropSite = dropEvent.getDropSite();
Transferable transferable = dropEvent.getTransferable();
DataFlavor<RowKeySet> rowKeySetFlavor = DataFlavor.getDataFlavor(RowKeySet.class, "rowmove");
RowKeySet rowKeySet = transferable.getData(rowKeySetFlavor);
RichTable table = (RichTable) dropEvent.getDragComponent();
if (rowKeySet != null)
CollectionModel dragModel = transferable.getData(CollectionModel.class);
Object dragM = dragModel.getRowData(0);
Object currKey = rowKeySet.iterator().next();
dragModel.setRowKey(currKey);
table.setRowKey(currKey);
OrderData orderData = (OrderData)this.prodReportTableData.get(Integer.parseInt(currKey.toString()));
this.prodReportTableData.remove(Integer.parseInt(currKey.toString()));
this.prodReportTableData.add(Integer.parseInt(dropSite.toString()), orderData);
OrderData orderDataAdded = this.prodReportTableData.get(Integer.parseInt(dropSite.toString()));
JSFUtils.addPartialTarget(this.getProdReportTableBinding());
catch(Exception e)
e.printStackTrace();
return DnDAction.MOVE;
Code snippet from UI:
<af:table value="#{pageFlowScope.prodReportBackingBean.prodReportTableData}"
var="row" styleClass="AFStretchWidth" rowBandingInterval="0"
rows="40" emptyText="No data to display." id="t1"
partialTriggers=":::cb1" columnStretching="column:c3"
binding="#{pageFlowScope.prodReportBackingBean.prodReportTableBinding}" summary="PROD TABLE">
<af:dragSource actions="MOVE" defaultAction="MOVE"
discriminant="rowmove"
dragDropEndListener="#{pageFlowScope.prodReportBackingBean.afterDragAndDrop}"/>
<af:collectionDropTarget dropListener="#{pageFlowScope.prodReportBackingBean.dropCollection}"
actions="MOVE"
modelName="rowmove"/>

Hi,
not sure its the reason but you have huge bummer in your configuration.
<af:table value="#{pageFlowScope.prodReportBackingBean.prodReportTableData}"
var="row" styleClass="AFStretchWidth" rowBandingInterval="0"
rows="40" emptyText="No data to display." id="t1"
partialTriggers=":::cb1" columnStretching="column:c3"
*binding="#{pageFlowScope.prodReportBackingBean.prodReportTableBinding}"* summary="PROD TABLE">
JSF component bindings should not be to beans in a scope larger than request to avoid stale component instances.
Frank

Events with Scrpts and JavaScript in ADOBE forms

Hello All,
On an Adobe form I have field for sub totals. I am trying to choose 'Events with Scripts' on the SHOW pull down values and choose JavaScript in the language. I was able to do this some time ago but now, I am able to choose Events with Scripts but not being able to choose JavaScript for language.
I do not have much exp. with Adobe or JavaScript but I checked whatever I could think of but could not figure out. Any body ran into this issue before? Any ideas?
Please post and Thank you ...

By trial and error, what I did is, chose 'Calculate' in the Show menu then chose JavaScript in the Language pull down menu. Then added my JavaScript code. Then went back and change 'Calculate' in the Show menu to Events with Scripts. Saved and executed it . It worked.

Export DataGrid Data to File With JSP and Java

My user's need to be able to load the data into a
spreadsheet. I would like to stay with Flex and not use AIR. I used
the windows clipboard but I run into Flash Player timeouts for
larger data sets if the looping of the DataGrid rows takes longer
than 2 minutes. I would like to do this with passing the data to a
JSP page or use BlazeDS and then download the file. I would like to
just pass the ArrayCollection so I don't have to loop through the
DataGrid rows. I know I can receive an ArrayList from Java using
BlazeDS and it gets converted to an ArrayCollection. Is it possible
to send an ArrayCollection to a JSP page or Java class with
BlazeDS?

quote:
Originally posted by:
hartleyk
Can anyone enlighten me on why, when I attempt this with one
app everything works just as it's supposed to, while in a different
one (the real one I'm trying to put in place, of course!), the php
file simply displays
".stripslashes($_POST["htmltable"])." "; ?>
in the browser instead of taking me through the file
browse/download process? Anyone else run into this problem?
Thanks for any help you can provide!
its seems some syntax related problem.
can you please post whole of your code? i thinks its not that
much big.

CHANGE BRUSH SIZE WITH CTRL and alt KEYS

Hello everyone,
i'm on the road with my new macbook and i have a problem with setting up my wacom pen.
At home i use a iMac with CS5 and to change the brush size i press the alt and the ctrl key and move the pen to left/tight up/down to chang size and hardnes of the brush. I find this very handy!
On my new Macbook i have CC and i don't have the option to use this easy key combination, i was loking around and did some google, but i could not find the place to get the same settings on my macbook.
Is there anyone who can help me?
Thank you very much.

When you press and hold Option/Alt + Control and Left mouse click and drag nothing happens?
(the button on your pen is set to left click?)
The Option/Alt key should always be the second key to the left of the spacebar
The Control key should always be the third key to the left of the spacebar

Lately when I try to right click it opens a new tab with recent searchs.I have to go back to the tab and right click again to get the options. How do i fix it?

When I try to right click now instead of getting the menu it goes into a new tab showing recent searches.I have to go back and right click again to get the menu and do what I wanted in the first place.Is there a way to fix this.This is really irritating.I like firefox but I'm ready to go back to Chrome. Thanks for any help.

You're right-clicking a link? I can't think of any setting that opens a blank tab when you right-click in a page. It's also strange that it would occur on the first click but not on the second click.
Does this affect all sites?
Are you expecting Firefox's context menu or the site's context menu?
One thing that comes to mind is overriding the site's own right-click handler by disabling scripts from capturing the right click. This is set under
orange Firefox button (or Tools menu) > Options > Content
To the right of "Enable JavaScript" is a button to access "Advanced" options. If it's checked, uncheck the box for "Disable or replace context menus".

Problem with rotation and keyboard click sound

Ok, there's still a problem with the rotation and keyboard click sound and I thought I had the problem fixed.
It's a serious bug when you want the keyboard click sound enbabled without having the rotation locked. I noticed this bug started when I had the previous iosinstalled 7.0.6.
Everytime I wanted to enable the keyboard click sound, I have to always go to settings and have lock rotation checked. And it would stay locked.
If I wanted to rotate my iPad, I have to have mute enabled, but no keyboard click sound.
I know it sounds confusing. I'm already confused... beh.

I completely forgot about that.
Thank you!

I can't open any new windows from File [New Tab] and from clicking on [+] , as I usually did. And [Ctrl+T] doesn't work for me.How I can make it to work for me again, please?

I have to open the next window by right clicking on some link from previous site, who gives, '''''from drop down menu''''', option to [Open link in new tab] and then I can use that "fresh" tab.
It is my desktop, if it's important to know for help.
Please, some ideas, how to fix it, will be welcome.
Thank you.

Hi, were you able to resolve your problem? If so, please mark this question as '''Solved'''. Thanks !

Share and change iCal events with co-workers

Hello,
I want to set up a iCal group with my co-designers at work, where we can all share and change any production schedules and vacations amongst each other. so everyone will know what is going on with each designers workload in a particular day or week or month.
Is it possible to set that up at our work?
Tnx
Jay

It is possible.
Create a Calendar on iCloud. Right click on it and it will open a small window were to pu the Emails of others to share the calendar with. They have to be iCloud Mails.
Sorry.. my iCal is italian but your will be similar.

JTable row selection with tab key

Helo.
I'm having a problem selecting rows in a JTable. The JTable is with single row selection and without column and cell selection. When I press <tab> the selection changes to another cell, and I wanna it to change to the other row of the table, can anyone help me? I think this is a easy one and I haven�t found a way to do it. I�m using JBuilder for the development.

The default Action for the Tab KeyStroke is to move focus to the next cell.
The default Action for the Enter KeyStroke is to move focus to the next line.
So this functionality is already available in JTable by default.
If you want to Tab Key to work the same way as the Enter Key then you need to map the Tab Key to use the Action assigned to the Enter Key.
This [url http://forum.java.sun.com/thread.jsp?forum=57&thread=505866]posting shows how you can reassign an Action for a given KeyStroke.
For more information on this topic read this section from the Swing tutorial on [url http://java.sun.com/docs/books/tutorial/uiswing/misc/keybinding.html]How to Use Key Bindings.

Datagrid change row event with tab AND/OR click ???

Similar Messages

Maybe you are looking for