Dataguard : redo transport service
Hi,
I have a question regarding dataguard: I have a primary database (oracle 10.2.0.4 win 2003 x64 R2 SP2) communicating with a standby and everything was working like a charm up to the moment where the primary starts creating a lot of session with the user PUBLIC on the standby.... At the end, the standby exceeded the maximum processes and the redo transport service stopped.
So I stopped/restart the standby and as soon as the primary sees the standby, there are 7 sessions with user PUBLIC that are created. Then few seconds, after another one was created and another one and it stoppes at 9 this time.
I would like to know what drives the creation of a new session and what is the purpose of those sessions (I thinks it maintains the synchronisation information....) .... What could be the reason for so many sessions to be created... Could it be network failure...
Thanks
Christophe Lizé
Hi Ogan,
Thanks for your answer. This is a windows box. SAP is the application that consumes the data.
In the standby alertlog, we can see the session that is started:
Setting recovery target incarnation to 2
ARCH: STARTING ARCH PROCESSES
ARC0 started with pid=14, OS id=4380
ARC1 started with pid=15, OS id=5008
ARC2 started with pid=16, OS id=2276
ARC3 started with pid=17, OS id=3596
ARC4 started with pid=18, OS id=5852
ARC5 started with pid=19, OS id=6044
ARC6 started with pid=20, OS id=4956
ARC7 started with pid=21, OS id=6068
ARC8 started with pid=22, OS id=2380
Wed Nov 24 15:05:52 2010
ARC0: Archival started
ARC1: Archival started
ARC2: Archival started
ARC9 started with pid=23, OS id=5296
Wed Nov 24 15:05:53 2010
ARC3: Archival started
ARC4: Archival started
ARC5: Archival started
ARC6: Archival started
ARC7: Archival started
ARC8: Archival started
ARC9: Archival started
ARCH: STARTING ARCH PROCESSES COMPLETE
Wed Nov 24 15:05:53 2010
ARC0: Becoming the 'no FAL' ARCH
ARC0: Becoming the 'no SRL' ARCH
ARC0: Thread not mounted
Wed Nov 24 15:05:53 2010
ARC1: Becoming the heartbeat ARCH
ARC1: Thread not mounted
Wed Nov 24 15:05:53 2010
ARC4: Thread not mounted
Wed Nov 24 15:05:53 2010
Successful mount of redo thread 1, with mount id 589430539
Wed Nov 24 15:05:53 2010
Physical Standby Database mounted.
Completed: alter database mount standby database
Wed Nov 24 15:05:53 2010
alter database recover managed standby database disconnect from session
MRP0 started with pid=24, OS id=3980
Wed Nov 24 15:05:54 2010
ARC7: Thread not mounted
Wed Nov 24 15:05:55 2010
ARC9: Thread not mounted
Wed Nov 24 15:05:56 2010
ARC5: Thread not mounted
Wed Nov 24 15:05:57 2010
ARC3: Thread not mounted
Wed Nov 24 15:05:58 2010
ARC2: Thread not mounted
Managed Standby Recovery not using Real Time Apply
parallel recovery started with 7 processes
Wed Nov 24 15:05:58 2010
Waiting for all non-current ORLs to be archived...
Wed Nov 24 15:05:59 2010
ARC6: Thread not mounted
Wed Nov 24 15:05:59 2010
Completed: alter database recover managed standby database disconnect from session
Wed Nov 24 15:05:59 2010
Media Recovery Waiting for thread 1 sequence 816
Fetching gap sequence in thread 1, gap sequence 816-821
Wed Nov 24 15:06:00 2010
ARC8: Thread not mounted
Wed Nov 24 15:06:10 2010
Using STANDBY_ARCHIVE_DEST parameter default value as G:\oracle\PPS\oraarch
Redo Shipping Client Connected as PUBLIC
-- Connected User is Valid
RFS[1]: Assigned to RFS process 5408
RFS[1]: Identified database type as 'physical standby'
Wed Nov 24 15:06:10 2010
RFS LogMiner: Client disabled from further notification
Wed Nov 24 15:06:10 2010
Redo Shipping Client Connected as PUBLIC
-- Connected User is Valid
RFS[2]: Assigned to RFS process 2360
RFS[2]: Identified database type as 'physical standby'
Wed Nov 24 15:06:10 2010
Redo Shipping Client Connected as PUBLIC
-- Connected User is Valid
RFS[3]: Assigned to RFS process 5872
RFS[3]: Identified database type as 'physical standby'
Wed Nov 24 15:06:10 2010
Redo Shipping Client Connected as PUBLIC
-- Connected User is Valid
RFS[4]: Assigned to RFS process 2012
RFS[4]: Identified database type as 'physical standby'
Wed Nov 24 15:06:10 2010
Redo Shipping Client Connected as PUBLIC
-- Connected User is Valid
RFS[5]: Assigned to RFS process 5336
RFS[5]: Identified database type as 'physical standby'
Wed Nov 24 15:06:10 2010
Redo Shipping Client Connected as PUBLIC
-- Connected User is Valid
RFS[6]: Assigned to RFS process 3888
RFS[6]: Identified database type as 'physical standby'
Wed Nov 24 15:06:10 2010
Redo Shipping Client Connected as PUBLIC
-- Connected User is Valid
RFS[7]: Assigned to RFS process 3088
RFS[7]: Identified database type as 'physical standby'
Wed Nov 24 15:06:10 2010
RFS[3]: Archived Log: 'G:\ORACLE\PPS\ORAARCH\LOG1_817_735230249.ARC'
Wed Nov 24 15:06:10 2010
RFS[4]: Archived Log: 'G:\ORACLE\PPS\ORAARCH\LOG1_818_735230249.ARC'
Wed Nov 24 15:06:10 2010
RFS[7]: Archived Log: 'G:\ORACLE\PPS\ORAARCH\LOG1_821_735230249.ARC'
Wed Nov 24 15:06:11 2010
RFS[2]: Archived Log: 'G:\ORACLE\PPS\ORAARCH\LOG1_819_735230249.ARC'
Wed Nov 24 15:06:11 2010
RFS[5]: Archived Log: 'G:\ORACLE\PPS\ORAARCH\LOG1_816_735230249.ARC'
Wed Nov 24 15:06:11 2010
RFS[6]: Archived Log: 'G:\ORACLE\PPS\ORAARCH\LOG1_820_735230249.ARC'
Wed Nov 24 15:06:29 2010
Media Recovery Log G:\ORACLE\PPS\ORAARCH\LOG1_816_735230249.ARC
Media Recovery Log G:\ORACLE\PPS\ORAARCH\LOG1_817_735230249.ARC
Media Recovery Log G:\ORACLE\PPS\ORAARCH\LOG1_818_735230249.ARC
Media Recovery Log G:\ORACLE\PPS\ORAARCH\LOG1_819_735230249.ARC
Media Recovery Log G:\ORACLE\PPS\ORAARCH\LOG1_820_735230249.ARC
Media Recovery Log G:\ORACLE\PPS\ORAARCH\LOG1_821_735230249.ARC
Media Recovery Waiting for thread 1 sequence 822
Fetching gap sequence in thread 1, gap sequence 822-822
Wed Nov 24 15:07:10 2010
RFS[6]: Archived Log: 'G:\ORACLE\PPS\ORAARCH\LOG1_822_735230249.ARC'
Wed Nov 24 15:07:31 2010
Media Recovery Log G:\ORACLE\PPS\ORAARCH\LOG1_822_735230249.ARC
Media Recovery Waiting for thread 1 sequence 823
Wed Nov 24 15:08:11 2010
RFS[7]: Archived Log: 'G:\ORACLE\PPS\ORAARCH\LOG1_823_735230249.ARC'
Wed Nov 24 15:08:31 2010
Media Recovery Log G:\ORACLE\PPS\ORAARCH\LOG1_823_735230249.ARC
Media Recovery Waiting for thread 1 sequence 824
Wed Nov 24 15:15:00 2010
RFS[1]: Successfully opened standby log 5: 'G:\ORACLE\PPS\ORIGLOGA\STBLOG_G5M1.DBF'
Wed Nov 24 15:15:01 2010
Media Recovery Log G:\ORACLE\PPS\ORAARCH\LOG1_824_735230249.ARCA lot of RFS process are created and each one is taking a session with the user PUBLIC.
What drives the creation of RFS process... and why Oracle does not reuse those created....
on the standby, the following query shows UNKNOW client_process
SQL> select process,status,client_process,sequence#,block#,active_agents,known_agents
2 from v$managed_standby;
PROCESS STATUS CLIENT_P SEQUENCE# BLOCK# ACTIVE_AGENTS KNOWN_AGENTS
ARCH CLOSING ARCH 800 1 0 0
ARCH CLOSING ARCH 801 1 0 0
ARCH CLOSING ARCH 802 1 0 0
ARCH CLOSING ARCH 803 2049 0 0
ARCH CLOSING ARCH 804 1 0 0
ARCH CLOSING ARCH 805 1 0 0
ARCH CLOSING ARCH 795 2049 0 0
ARCH CLOSING ARCH 796 1 0 0
ARCH CLOSING ARCH 797 1 0 0
ARCH CLOSING ARCH 798 1 0 0
RFS IDLE UNKNOWN 0 0 0 0
RFS IDLE UNKNOWN 0 0 0 0
RFS IDLE UNKNOWN 0 0 0 0
RFS IDLE UNKNOWN 0 0 0 0
RFS IDLE UNKNOWN 0 0 0 0
RFS IDLE UNKNOWN 0 0 0 0
RFS IDLE UNKNOWN 0 0 0 0
RFS IDLE UNKNOWN 0 0 0 0
RFS IDLE UNKNOWN 0 0 0 0
MRP0 WAIT_FOR_LOG N/A 807 0 0 0
RFS IDLE UNKNOWN 0 0 0 0
RFS IDLE UNKNOWN 0 0 0 0
RFS IDLE UNKNOWN 0 0 0 0
RFS IDLE UNKNOWN 0 0 0 0
RFS IDLE UNKNOWN 0 0 0 0
RFS IDLE UNKNOWN 0 0 0 0
RFS IDLE UNKNOWN 0 0 0 0
RFS IDLE UNKNOWN 0 0 0 0
RFS IDLE UNKNOWN 0 0 0 0
RFS IDLE UNKNOWN 0 0 0 0
RFS IDLE UNKNOWN 0 0 0 0
RFS IDLE UNKNOWN 0 0 0 0
PROCESS STATUS CLIENT_P SEQUENCE# BLOCK# ACTIVE_AGENTS KNOWN_AGENTS
RFS IDLE UNKNOWN 0 0 0 0
RFS IDLE UNKNOWN 0 0 0 0
RFS IDLE UNKNOWN 0 0 0 0
RFS IDLE UNKNOWN 0 0 0 0
RFS IDLE UNKNOWN 0 0 0 0
RFS IDLE UNKNOWN 0 0 0 0
RFS IDLE UNKNOWN 0 0 0 0
RFS IDLE UNKNOWN 0 0 0 0
RFS IDLE UNKNOWN 0 0 0 0
RFS IDLE UNKNOWN 0 0 0 0
RFS IDLE UNKNOWN 0 0 0 0
RFS IDLE UNKNOWN 0 0 0 0
RFS IDLE UNKNOWN 0 0 0 0
RFS IDLE UNKNOWN 0 0 0 0
RFS IDLE UNKNOWN 0 0 0 0
RFS IDLE UNKNOWN 0 0 0 0
RFS IDLE UNKNOWN 0 0 0 0
RFS IDLE UNKNOWN 0 0 0 0
RFS IDLE UNKNOWN 0 0 0 0
RFS IDLE UNKNOWN 0 0 0 0
RFS IDLE UNKNOWN 0 0 0 0
RFS IDLE UNKNOWN 0 0 0 0
RFS IDLE UNKNOWN 0 0 0 0
RFS IDLE UNKNOWN 0 0 0 0
RFS IDLE UNKNOWN 0 0 0 0
57 rows selected.I don't know if you have enough information...
Thanks
Christophe
Similar Messages
-
Dataguard Log Transport Services Warning
Please, explain me. What mind Warning on Primary Server
SELECT a.facility, a.severity, a.ERROR_CODE, a.MESSAGE
FROM v_$dataguard_status a
where a.facility = 'Log Transport Services'
and a.severity = 'Warning';
result
FACILITY SEVERITY ERROR_CODE
MESSAGE
Log Transport Services Warning 0
LNS: Standby redo logfile selected for thread 1 sequence 136 for destination LOG_ARCHIVE_DEST_2
Log Transport Services Warning 0
ARC0: Standby redo logfile selected for thread 1 sequence 135 for destination LOG_ARCHIVE_DEST_2In alertlog on Primary only message like :
Fri Jun 20 16:08:11 2008
LNS: Standby redo logfile selected for thread 1 sequence 146 for destination LOG_ARCHIVE_DEST_2
Fri Jun 20 16:08:12 2008
Thread 1 advanced to log sequence 147 (LGWR switch)
Current log# 3 seq# 147 mem# 0: /ora/oradata/testmain/redo31.log
Current log# 3 seq# 147 mem# 1: /ora/oradata/testmain/redo32.log
Fri Jun 20 16:08:12 2008
LNS: Standby redo logfile selected for thread 1 sequence 147 for destination LOG_ARCHIVE_DEST_2
Fri Jun 20 16:08:13 2008
Thread 1 advanced to log sequence 148 (LGWR switch)
Current log# 1 seq# 148 mem# 0: /ora/oradata/testmain/redo11.log
Current log# 1 seq# 148 mem# 1: /ora/oradata/testmain/redo12.log
and alert log Standby like:
Fri Jun 20 16:06:29 2008
Recovery of Online Redo Log: Thread 1 Group 5 Seq 145 Reading mem 0
Mem# 0: /ora/oradata/maintest/redo51std.log
Mem# 1: /ora/oradata/maintest/redo52std.log
Fri Jun 20 16:08:11 2008
Primary database is in MAXIMUM PERFORMANCE mode
RFS[1]: Successfully opened standby log 4: '/ora/oradata/maintest/redo41std.log'
Fri Jun 20 16:08:11 2008
Media Recovery Waiting for thread 1 sequence 146 (in transit)
Fri Jun 20 16:08:11 2008
Recovery of Online Redo Log: Thread 1 Group 4 Seq 146 Reading mem 0
Mem# 0: /ora/oradata/maintest/redo41std.log
Mem# 1: /ora/oradata/maintest/redo42std.log
I think that all work property. But I do not understand why message Warning? -
Quick Redo Transport Services question
Hey All,
I'm just testing Data Guard out for the first time. To make sure I understand this properly, physical archive logs are not copied from the primary to standby (LGWR or ARCH). Rather, the redo is copied into the online standby redo logs, and then the standby archives them when switches occur (which would be when the primary does a switch). Is this correct?
Thanks!Hi
It depends how you have configured your data guard set-up, assuming you have created standby redo logs then yes this is roughly what will happen.
Have you read: http://download.oracle.com/docs/cd/B19306_01/server.102/b14239/concepts.htm#i1033862 ? It does explain all of this.
Thanks
Paul -
I am facing following errors , first error is on production database and second error is on physical standby database.
1. ORA-16778: redo transport error for one or more databases
2. ORA-01017: invalid username/password; logon denied
I study above messages but could not resolve. Now i shall be v v thankful if someone can help me in resolving errors, in simple step-by-step way.
Thank in advance1. ORA-16778: redo transport error for one or more databases
16778, 00000, "redo transport error for one or more databases"
// *Cause: The redo transport service was unable to send redo data to one
// or more standby databases.
// *Action: Check the Data Guard broker log and Oracle alert log for
// more details. Query the LogXptStatus property to see the
// errors.2. ORA-01017: invalid username/password; logon denied
Provide valid username/password
Post Operating System (OS) name & version for DB server system.
Post results of
SELECT * from v$version -
Error: ORA-16778: redo transport error for one or more databases
Hi all
I have 2 database servers"Primary database and physical standby" in test environment( before going to Production)
Before Dataguard broker configuration , DG setup was running fine , redo was being applied and archived on phy standby.
but while enabling configuration i got "Warning: ORA-16607: one or more databases have failed" listener.ora & tnsnames.ora are updated with global_name_DGMGRL
Please help me how can i resolve this issue .Thanks in advance.
[oracle@PRIM ~]$ dgmgrl
DGMGRL for Linux: Version 10.2.0.1.0 - Production
Copyright (c) 2000, 2005, Oracle. All rights reserved.
Welcome to DGMGRL, type "help" for information.
DGMGRL> connect sys
Password:
Connected.
DGMGRL> show configuration
Configuration
Name: test
Enabled: YES
Protection Mode: MaxPerformance
Fast-Start Failover: DISABLED
Databases:
prim - Primary database
stan - Physical standby database
Current status for "test":
Warning: ORA-16607: one or more databases have failed
DGMGRL> show database
show database
^
Syntax error before or at "end-of-line"
DGMGRL> remove configuration
Warning: ORA-16620: one or more databases could not be contacted for a delete operation
Removed configuration
DGMGRL> exit
[oracle@PRIM ~]$ connect sys/sys@prim as sysdba
bash: connect: command not found
[oracle@PRIM ~]$ lsnrctl stop
LSNRCTL for Linux: Version 10.2.0.1.0 - Production on 08-OCT-2006 19:52:30
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1)))
The command completed successfully
[oracle@PRIM ~]$ lsnrctl start
LSNRCTL for Linux: Version 10.2.0.1.0 - Production on 08-OCT-2006 19:52:48
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Starting /u01/app/oracle/product/10.2.0/db_1/bin/tnslsnr: please wait...
TNSLSNR for Linux: Version 10.2.0.1.0 - Production
System parameter file is /u01/app/oracle/product/10.2.0/db_1/network/admin/listener.ora
Log messages written to /u01/app/oracle/product/10.2.0/db_1/network/log/listener.log
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1)))
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=PRIM)(PORT=1521)))
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for Linux: Version 10.2.0.1.0 - Production
Start Date 08-OCT-2006 19:52:48
Uptime 0 days 0 hr. 0 min. 0 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /u01/app/oracle/product/10.2.0/db_1/network/admin/listener.ora
Listener Log File /u01/app/oracle/product/10.2.0/db_1/network/log/listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=PRIM)(PORT=1521)))
Services Summary...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "PRIM_DGMGRLL" has 1 instance(s).
Instance "PRIM", status UNKNOWN, has 1 handler(s) for this service...
The command completed successfully
[oracle@PRIM ~]$ lsnrctl stop
LSNRCTL for Linux: Version 10.2.0.1.0 - Production on 08-OCT-2006 19:54:46
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1)))
The command completed successfully
[oracle@PRIM ~]$ lsnrctl start
LSNRCTL for Linux: Version 10.2.0.1.0 - Production on 08-OCT-2006 19:54:59
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Starting /u01/app/oracle/product/10.2.0/db_1/bin/tnslsnr: please wait...
TNSLSNR for Linux: Version 10.2.0.1.0 - Production
System parameter file is /u01/app/oracle/product/10.2.0/db_1/network/admin/listener.ora
Log messages written to /u01/app/oracle/product/10.2.0/db_1/network/log/listener.log
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1)))
Listening on: (DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=PRIM)(PORT=1521)))
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(KEY=EXTPROC1)))
[oracle@PRIM ~]$ dgmgrl
DGMGRL for Linux: Version 10.2.0.1.0 - Production
Copyright (c) 2000, 2005, Oracle. All rights reserved.
Welcome to DGMGRL, type "help" for information.
DGMGRL> connect /
Connected.
DGMGRL> create configuration test as
primary database is PRIM
connect identifier is PRIM
;Configuration "test" created with primary database "prim"
DGMGRL> add database STAN as
connect identifier is STAN
maintained as physical;Database "stan" added
DGMGRL> show configuration
Configuration
Name: test
Enabled: NO
Protection Mode: MaxPerformance
Fast-Start Failover: DISABLED
Databases:
prim - Primary database
stan - Physical standby database
Current status for "test":
DISABLED
DGMGRL> enable configuration
Enabled.
DGMGRL> show configuration
Configuration
Name: test
Enabled: YES
Protection Mode: MaxPerformance
Fast-Start Failover: DISABLED
Databases:
prim - Primary database
stan - Physical standby database
Current status for "test":
Warning: ORA-16607: one or more databases have failed
DGMGRL> show database verbose prim
Database
Name: prim
Role: PRIMARY
Enabled: YES
Intended State: ONLINE
Instance(s):
PRIM
Properties:
InitialConnectIdentifier = 'prim'
LogXptMode = 'ASYNC'
Dependency = ''
DelayMins = '0'
Binding = 'OPTIONAL'
MaxFailure = '0'
MaxConnections = '1'
ReopenSecs = '300'
NetTimeout = '180'
LogShipping = 'ON'
PreferredApplyInstance = ''
ApplyInstanceTimeout = '0'
ApplyParallel = 'AUTO'
StandbyFileManagement = 'AUTO'
ArchiveLagTarget = '0'
LogArchiveMaxProcesses = '30'
LogArchiveMinSucceedDest = '1'
DbFileNameConvert = '/u01/app/oracle/oradata/STAN, /u01/app/oracle/oradata/PRIM'
LogFileNameConvert = '/u01/app/oracle/oradata/STAN, /u01/app/oracle/oradata/PRIM'
FastStartFailoverTarget = ''
StatusReport = '(monitor)'
InconsistentProperties = '(monitor)'
InconsistentLogXptProps = '(monitor)'
SendQEntries = '(monitor)'
LogXptStatus = '(monitor)'
RecvQEntries = '(monitor)'
HostName = 'PRIM'
SidName = 'PRIM'
LocalListenerAddress = '(ADDRESS=(PROTOCOL=tcp)(HOST=PRIM)(PORT=1521))'
StandbyArchiveLocation = '/u01/app/oracle/flash_recovery_area/PRIM/archivelog/'
AlternateLocation = ''
LogArchiveTrace = '0'
LogArchiveFormat = '%t_%s_%r.arc'
LatestLog = '(monitor)'
TopWaitEvents = '(monitor)'
Current status for "prim":
Error: ORA-16778: redo transport error for one or more databases
DGMGRL> show database verbose stan
Database
Name: stan
Role: PHYSICAL STANDBY
Enabled: YES
Intended State: ONLINE
Instance(s):
STAN
Properties:
InitialConnectIdentifier = 'stan'
LogXptMode = 'ASYNC'
Dependency = ''
DelayMins = '0'
Binding = 'OPTIONAL'
MaxFailure = '0'
MaxConnections = '1'
ReopenSecs = '300'
NetTimeout = '180'
LogShipping = 'ON'
PreferredApplyInstance = ''
ApplyInstanceTimeout = '0'
ApplyParallel = 'AUTO'
StandbyFileManagement = 'AUTO'
ArchiveLagTarget = '0'
LogArchiveMaxProcesses = '30'
LogArchiveMinSucceedDest = '1'
DbFileNameConvert = '/u01/app/oracle/oradata/PRIM, /u01/app/oracle/oradata/STAN'
LogFileNameConvert = '/u01/app/oracle/oradata/PRIM, /u01/app/oracle/oradata/STAN'
FastStartFailoverTarget = ''
StatusReport = '(monitor)'
InconsistentProperties = '(monitor)'
InconsistentLogXptProps = '(monitor)'
SendQEntries = '(monitor)'
LogXptStatus = '(monitor)'
RecvQEntries = '(monitor)'
HostName = 'STAND'
SidName = 'STAN'
LocalListenerAddress = '(ADDRESS=(PROTOCOL=tcp)(HOST=STAND)(PORT=1521))'
StandbyArchiveLocation = '/u01/app/oracle/flash_recovery_area/STAN/archivelog/'
AlternateLocation = ''
LogArchiveTrace = '0'
LogArchiveFormat = '%t_%s_%r.arc'
LatestLog = '(monitor)'
TopWaitEvents = '(monitor)'
Current status for "stan":
Error: ORA-12545: Connect failed because target host or object does not exist
DGMGRL>This:
Current status for "stan":
Error: ORA-12545: Connect failed because target host or object does not exist
says that your network setup is not correct. You need to resolve that first.
As for Broker setup steps how about the doc or our Data Guard 11g Handbook?
It's 3 DGMGRL commands so I am not sure what 'steps' you need?
Larry -
ORA-16009: invalid redo transport destination;
Dear friends.
I am trying to set up phycial standby in Oracle 11g on linux in vmware.
Everything seems to fine but The configuration is not taking effect.
An error cropping repeatedly
ORA-16009
I am putting the errors and some of the contents.
Standby System
archive log list
Database log mode Archive Mode
Automatic archival Enabled
Archive destination /disk1/oradata/arch
Oldest online log sequence 2
Next log sequence to archive 3
Current log sequence 3
Production System
atabase log mode Archive Mode
Automatic archival Enabled
Archive destination /disk1/oradata/arch
Oldest online log sequence 8
Next log sequence to archive 9
Current log sequence 9
on Client Errors:
ORA-16009: invalid redo transport destination
PING[ARC0]: Heartbeat failed to connect to standby 'to_orcl1'. Error is 16009.
Fri May 04 22:45:54 2012
Errors in file /disk1/oradata/oracldir/diag/rdbms/orcl3/orcl3/trace/orcl3_arc0_10286.trc:
ORA-16009: invalid redo transport destination
PING[ARC0]: Heartbeat failed to connect to standby 'to_orcl1'. Error is 16009.
Fri May 04 22:47:45 2012
Errors in file /disk1/oradata/oracldir/diag/rdbms/orcl3/orcl3/trace/orcl3_arc0_10286.trc:
ORA-16009: invalid redo transport destination
PING[ARC0]: Heartbeat failed to connect to standby 'to_orcl1'. Error is 16009.
Fri May 04 22:49:48 2012
Errors in file /disk1/oradata/oracldir/diag/rdbms/orcl3/orcl3/trace/orcl3_arc0_10286.trc:
ORA-16009: invalid redo transport destination
PING[ARC0]: Heartbeat failed to connect to standby 'to_orcl1'. Error is 16009.
Fri May 04 22:51:40 2012
Errors in file /disk1/oradata/oracldir/diag/rdbms/orcl3/orcl3/trace/orcl3_arc0_10286.trc:
ORA-16009: invalid redo transport destination
PING[ARC0]: Heartbeat failed to connect to standby 'to_orcl1'. Error is 16009.
On Production System Errors:
ORA-16009: invalid redo transport destination
Fri May 04 22:47:37 2012
Error 1034 received logging on to the standby
Fri May 04 22:47:48 2012
RFS[43]: Assigned to RFS process 17922
RFS[43]: Database mount ID mismatch [0x2a846b0e:0x2a856e71] (713321230:713387633)
RFS[43]: Client instance is standby database instead of primary
RFS[43]: Not using real application clusters
Errors in file /disk1/oradata/oracldir/diag/rdbms/orcl3/orcl3/trace/orcl3_rfs_17922.trc:
ORA-16009: invalid redo transport destination
Fri May 04 22:49:17 2012
Destination LOG_ARCHIVE_DEST_2 is UNSYNCHRONIZED
Thread 1 advanced to log sequence 14 (LGWR switch)
Current log# 2 seq# 14 mem# 0: /disk1/oradata/oracldir/redolog2.log
Fri May 04 22:49:18 2012
Archived Log entry 17 added for thread 1 sequence 13 ID 0x2a7a0eb4 dest 1:
Fri May 04 22:49:50 2012
RFS[44]: Assigned to RFS process 17999
RFS[44]: Database mount ID mismatch [0x2a846b0e:0x2a856e71] (713321230:713387633)
RFS[44]: Client instance is standby database instead of primary
RFS[44]: Not using real application clusters
Errors in file /disk1/oradata/oracldir/diag/rdbms/orcl3/orcl3/trace/orcl3_rfs_17999.trc:
ORA-16009: invalid redo transport destination
Fri May 04 22:51:42 2012
RFS[45]: Assigned to RFS process 18057
RFS[45]: Database mount ID mismatch [0x2a846b0e:0x2a856e71] (713321230:713387633)
RFS[45]: Client instance is standby database instead of primary
RFS[45]: Not using real application clusters
Errors in file /disk1/oradata/oracldir/diag/rdbms/orcl3/orcl3/trace/orcl3_rfs_18057.trc:
ORA-16009: invalid redo transport destination
Fri May 04 22:52:00 2012
Error 1034 received logging on to the standby
Fri May 04 22:52:32 2012
Error 1034 received logging on to the standby
Errors in file /disk1/oradata/oracldir/diag/rdbms/orcl3/orcl3/trace/orcl3_arc2_17414.trc:
ORA-01034: ORACLE not available
FAL[server, ARC2]: FAL archive failed, see trace file.
Errors in file /disk1/oradata/oracldir/diag/rdbms/orcl3/orcl3/trace/orcl3_arc2_17414.trc:
ORA-16055: FAL request rejected
ARCH: FAL archive failed. Archiver continuing
ORACLE Instance orcl3 - Archival Error. Archiver continuing.
Fri May 04 22:53:42 2012
RFS[46]: Assigned to RFS process 18115
RFS[46]: Database mount ID mismatch [0x2a846b0e:0x2a856e71] (713321230:713387633)
RFS[46]: Client instance is standby database instead of primary
RFS[46]: Not using real application clusters
Errors in file /disk1/oradata/oracldir/diag/rdbms/orcl3/orcl3/trace/orcl3_rfs_18115.trc:
ORA-16009: invalid redo transport destinationOK;
I see several issues. Will post results back here in a Moment.
Primary
Missing several parameters :
FAL_SERVER
DB_UNIQUE_NAME
LOG_ARCHIVE_DEST_STATE_1 ( should be ENABLE )
LOG_ARCHIVE_DEST_STATE_2 ( should be ENABLE )
Incorrect settings
log_archive_dest_1
log_archive_dest_2
YOURS
log_archive_dest_1="location=/disk1/oradata/arch"
EXAMPLE FROM MINE
log_archive_dest_1='LOCATION=USE_DB_RECOVERY_FILE_DEST VALID_FOR=(ALL_LOGFILES,ALL_ROLES) DB_UNIQUE_NAME=PRIMARY'
YOURS
log_archive_dest_2="Service=to_orcl1 lgwr sync affirm reopen=3"
EXAMPLE FROM MINE
log_archive_dest_2='SERVICE=STANDBY LGWR ASYNC VALID_FOR=(ONLINE_LOGFILES,PRIMARY_ROLE) DB_UNIQUE_NAME=STANDBY'
Standby
Missing several parameters :
LOG_ARCHIVE_DEST_STATE_1 ( should be ENABLE )
LOG_ARCHIVE_DEST_STATE_2 ( should be DEFER )
FAL_SERVER
DB_UNIQUE_NAME
Incorrect settings
log_archive_dest_1
log_archive_dest_2
(similar to primary issues)
Summary
OK, this is way off. I don't in any way want to be unprofessional or rude but I'm not sure how to help without wasting you time or mine. So I'm going to take a few educated guesses and hope I'm helping you.
First I have a short note on how to do this here :
http://www.visi.com/~mseberg/data_guard_on_oracle_11_step_by_step.html
Second, you really need to understand the Oracle parameters needed by Data Guard so I would ask you read :
Data Guard Concepts and Administration 11g Release 2 (11.2) E10700-02
The section in chapter 3 "Set Primary Database Initialization Parameters"
Third, you say vmware. By that do you mean two separate vmware servers? A Primary and a Standby of something else?
More details here might help. Vmware is fine, but if I'm setting this up I want two Servers, one for the Primary and one for the Standby database.
Will still post the details of Standby INIt ASAP
Best Regards
mseberg
Edited by: mseberg on May 4, 2012 12:48 PM
Edited by: mseberg on May 4, 2012 1:43 PM -
Hello everyone :
I can't switchover to primary. following is error and information.
RHEL 6.3 x86-64
Oracle database 11.2.0.3.0 Enterprise edition
Primary database = orclprmy
Standby database = orclstby1
##### /etc/hosts on orclstby1
[root@orclstby1 admin]# cat /etc/hosts
127.0.0.1 localhost localhost.localdomain localhost4 localhost4.localdomain4
::1 localhost localhost.localdomain localhost6 localhost6.localdomain6
192.168.50.211 ttprmy
192.168.50.212 orclstby1
### DG broker error
DGMGRL for Linux: Version 11.2.0.3.0 - 64bit Production
Copyright (c) 2000, 2009, Oracle. All rights reserved.
Welcome to DGMGRL, type "help" for information.
Connected.
DGMGRL> show configuration;
Configuration - TTDGConfig1
Protection Mode: MaxPerformance
Databases:
orclstby1 - Primary database
Error: ORA-16778: redo transport error for one or more databases
orclprmy - Physical standby database
Fast-Start Failover: DISABLED
Configuration Status:
ERROR
DGMGRL>
########### listener.ora on orclstby1
[root@orclstby1 admin]# cat listener.ora
# listener.ora Network Configuration File: /u2/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora
# Generated by Oracle configuration tools.
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = orclstby1)(PORT = 1521))
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1521))
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(GLOBAL_DBNAME=orcl)
(SID_NAME = orclstby1)
(ORACLE_HOME = /u2/oracle/product/11.2.0/dbhome_1)
(SID_DESC =
(GLOBAL_DBNAME=orclstby1)
(SID_NAME = orclstby1)
(ORACLE_HOME = /u2/oracle/product/11.2.0/dbhome_1)
(SID_DESC =
(GLOBAL_DBNAME=orclstby1_DGMGRL)
(SID_NAME = orclstby1)
(ORACLE_HOME = /u2/oracle/product/11.2.0/dbhome_1)
ADR_BASE_LISTENER = /u2/oracle
############## tnsnames.ora on orclstby1
ORCL =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.50.212)(PORT = 1521))
(CONNECT_DATA = (SERVER = DEDICATED)(SERVICE_NAME = orcl))
orclprmy =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.50.211)(PORT = 1521))
(CONNECT_DATA = (SERVER = DEDICATED)(SERVICE_NAME = orclprmy))
orclprmy_DGMGRL =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.50.211)(PORT = 1521))
(CONNECT_DATA = (SERVER = DEDICATED)(SERVICE_NAME = orclprmy_DGMGRL))
orclstby1 =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.50.212)(PORT = 1521))
(CONNECT_DATA = (SERVER = DEDICATED)(SERVICE_NAME = orclstby1))
orclstby1_DGMGRL =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.50.212)(PORT = 1521))
(CONNECT_DATA = (SERVER = DEDICATED)(SERVICE_NAME = orclstby1_DGMGRL))
##### alert log on orclstby1.
Fatal NI connect error 12504, connecting to:
(DESCRIPTION=(CONNECT_DATA=(SERVICE_NAME=)(CID=(PROGRAM=oracle)(HOST=orclstby1)(USER=oracle)))(ADDRESS=(PROTOCOL=TCP)(HOST=192.168.50.211)(PORT=1521)))
VERSION INFORMATION:
TNS for Linux: Version 11.2.0.3.0 - Production
TCP/IP NT Protocol Adapter for Linux: Version 11.2.0.3.0 - Production
Time: 06-SEP-2013 13:19:55
Tracing not turned on.
Tns error struct:
ns main err code: 12564
TNS-12564: TNS:connection refused
ns secondary err code: 0
nt main err code: 0
nt secondary err code: 0
nt OS err code: 0
There is problem in alert log.
In the /etc/hosts file. The standby server (orclstby1) ip is 192.168.50.212. but alert log is 192.168.50.211.
Is any idea?
Thanks for help.
消息编辑者为:user4914135#### on primary database
SQL> select dest_name,status,target,archiver,schedule, valid_type,valid_role,db_unique_name,error from v$archive_dest;
DEST_NAME STATUS TARGET ARCHIVER SCHEDULE VALID_TYPE VALID_ROLE DB_UNIQUE_NAME
ERROR
LOG_ARCHIVE_DEST_1 VALID LOCAL ARCH ACTIVE ALL_LOGFILES ALL_ROLES orclprmy
LOG_ARCHIVE_DEST_2 VALID REMOTE LGWR PENDING ALL_LOGFILES PRIMARY_ROLE orclstby1
LOG_ARCHIVE_DEST_3 INACTIVE LOCAL ARCH INACTIVE ALL_LOGFILES ALL_ROLES NONE
#### on standby database
SQL> select dest_name,status,target,archiver,schedule, valid_type,valid_role,db_unique_name,error from v$archive_dest;
DEST_NAME STATUS TARGET ARCHIVER SCHEDULE VALID_TYPE VALID_ROLE DB_UNIQUE_NAME
ERROR
LOG_ARCHIVE_DEST_1 VALID PRIMARY ARCH ACTIVE ALL_LOGFILES ALL_ROLES orclstby1
LOG_ARCHIVE_DEST_2 ERROR STANDBY LGWR PENDING ONLINE_LOGFILE PRIMARY_ROLE orclprmy
ORA-12504: TNS:listener was not given the SERVICE_NAME in
CONNECT_DATA
LOG_ARCHIVE_DEST_3 INACTIVE PRIMARY ARCH INACTIVE ALL_LOGFILES ALL_ROLES NONE
#### log_archive_dest on primary database
SQL> show parameter log_archive_dest
NAME TYPE VALUE
log_archive_dest string
log_archive_dest_1 string location=/u3/arch/orcl vali
d_for=(ALL_LOGFILES,ALL_ROLES)
db_unique_name=orclprmy
log_archive_dest_10 string
log_archive_dest_11 string
log_archive_dest_12 string
log_archive_dest_13 string
log_archive_dest_14 string
log_archive_dest_15 string
log_archive_dest_16 string
log_archive_dest_17 string
log_archive_dest_18 string
log_archive_dest_19 string
log_archive_dest_2 string service="orclstby1", LGWR ASYNC
NOAFFIRM delay=0 optional comp
ression=disable max_failure=0
max_connections=1 reopen=300 d
b_unique_name="orclstby1" net_ti
meout=30, valid_for=(all_logfi
les,primary_role)
log_archive_dest_20 string
log_archive_dest_21 string
log_archive_dest_22 string
#### log_archive_dest on standby database
SQL> show parameter log_archive_dest
NAME TYPE VALUE
log_archive_dest string
log_archive_dest_1 string location=/u3/arch/orclstby1 vali
d_for=(ALL_LOGFILES,ALL_ROLES)
db_unique_name=orclstby1
log_archive_dest_10 string
log_archive_dest_11 string
log_archive_dest_12 string
log_archive_dest_13 string
log_archive_dest_14 string
log_archive_dest_15 string
log_archive_dest_16 string
log_archive_dest_17 string
log_archive_dest_18 string
log_archive_dest_19 string
log_archive_dest_2 string service=orclprmy ASYNC valid_for
=(ONLINE_LOGFILE,PRIMARY_ROLE)
db_unique_name=orclprmy
log_archive_dest_20 string
log_archive_dest_21 string
log_archive_dest_22 string
log_archive_dest_23 string
log_archive_dest_24 string
log_archive_dest_25 string
#### spfile on standby database
</u2/oracle/product/11.2.0/dbhome_1/dbs> strings spfileorclstby1.ora
orcl.__db_cache_size=1040187392
orclstby1.__db_cache_size=1090519040
orcl.__java_pool_size=16777216
orclstby1.__java_pool_size=16777216
orcl.__large_pool_size=16777216
orclstby1.__large_pool_size=16777216
orcl.__oracle_base='/u2/oracle'#ORACLE_BASE set from environment
orclstby1.__oracle_base='/u2/oracle'#ORACLE_BASE set from environment
orcl.__pga_aggregate_target=536870912
orclstby1.__pga_aggregate_target=536870912
orcl.__sga_target=1610612736
orclstby1.__sga_target=161061273
orcl.__shared_io_pool_size=0
orclstby1.__shared_io_pool_size=0
orcl.__shared_pool_size=503316480
orclstby1.__shared_pool_size=469762048
orcl.__streams_pool_size=16777216
orclstby1.__streams_pool_size=0
*.archive_lag_target=0
*.audit_file_dest='/u2/oracle/admin/orclstby1/adump'
*.audit_trail='db'
*.compatible='11.2.0.0.0'
*.control_files='/u2/oracle/oradata/orclstby1/control01.ctl','/u2/oracle/fast_recovery_area/orclstby1/control02.ctl'
*.db_block_size=8192
*.db_domain=''
*.db_file_nam
e_convert='orcl','orclstby1'
*.db_name='orcl'
*.db_recovery_file_dest='/u2/oracle/fast_recovery_area'
*.db_recovery_file_dest_size=5218762752
*.db_unique_name='orclstby1'
*.deferred_segment_creation=FALSE
*.dg_broker_start=TRUE
*.diagnostic_dest='/u2/oracle'
*.fal_client='orclstby1'
*.fal_server='orclprmy'
*.log_archive_config='dg_config=(orclprmy,orclstby1)'
*.log_archive_dest_1='location=/u3/arch/orclstby1 valid_for=(ALL_LOGFILES,ALL_ROLES) db_unique_name=orclstby1'
*.log_archive_dest_2='ser
vice=orclprmy ASYNC valid_for=(ONLINE_LOGFILE,PRIMARY_ROLE) db_unique_name=orclprmy'
*.log_archive_dest_state_2='ENABLE'
orcl.log_archive_format='orcl_%t_%s_%r.arc'
*.log_archive_format='orclstby1_%t_%s_%r.arc'
orclstby1.log_archive_format='orclstby1_%t_%s_%r.arc'
*.log_archive_max_processes=4
*.log_archive_min_succeed_dest=1
orcl.log_archive_trace=0
orclstby1.log_archive_trace=0
*.log_file_name_convert='orcl','orclstby1'
*.open_cursors=300
*.pga_aggregate_target=536870912
*.processes=
1500
*.remote_login_passwordfile='EXCLUSIVE'
*.sessions=1655
*.sga_target=1610612736
*.standby_file_management='AUTO'
*.undo_tablespace='UNDOTBS1'
</u2/oracle/product/11.2.0/dbhome_1/dbs>
Thank you for your help. -
V$DATAGUARD_STATUS - Log Transport Services Warning
Hello gurus,
OS read hat, oracle enterprise edition 11g release 2, dataguard 2 physical standby's
everything works fine but since 1 day we get following warnings from dataguard on the primary server:
SELECT * FROM V$DATAGUARD_STATUS;
FACILITY SEVERITY DEST_ID MESSAGE_NUM ERROR_CODE CAL TIMESTAM
MESSAGE
Log Transport Services Warning 0 309911 0 NO 01.11.12
RTC returned 2, disabling RTC for next 2 I/Os.
does anybody know this warning message?
in the alert log it looks like this:
RTC returned 2, disabling RTC for next 2 I/Os.
Thu Nov 01 12:09:46 2012
RTC returned 2, disabling RTC for next 2 I/Os.
Re-enabling RTC following backoff interval 2.
Re-enabling RTC following backoff interval 2.
RTC returned 2, disabling RTC for next 2 I/Os.
RTC returned 2, disabling RTC for next 2 I/Os.
Re-enabling RTC following backoff interval 2.
Re-enabling RTC following backoff interval 2.
Thu Nov 01 12:11:16 2012
RTC returned 2, disabling RTC for next 2 I/Os.
Re-enabling RTC following backoff interval 2.
thanks in advanceHello;
It might be this :
Bug 9869401 - Unwanted ".. RTC .." messages in alert log if COMPRESSION enabled on LOG_ARCHIVE_DEST_n [ID 9869401.8]
Best Regards
mseberg -
Noticed at about noon that no emails had been received all day. Began to investigate and found that the MS Exchange Transport service had been set to deny email submission because it was using too much memory on the server (91%).
The error message makes me think that we may have been getting used by malware or something similar.“The Microsoft Exchange Transport service is rejecting message submissions because the service continues to consume more memory than the
configured threshold.”
There are also several warning messages that list particular IP addresses and say that a connection from that IP was denied because there were already the maximum number of connections (20).
From what I can tell, all of the IP addresses are from Taiwan.
The time period for which some emails may be missing is from close of business yesterday ( 4/3/2014) through about 12:45 today (4/4/2014).
From the time I spent reading and trying to figure out the error, I think we may need to readjust our throttling policies to prevent this from happening.
The exchange server is currently running at 90%+ CPU and 50%+ memory usage the majority of the time, and I’m not sure how to fix it.
Also, I cannot get into EMS I get a access denied message from the destination computer. (Exchange server) I want to get into there to change the throttling policy back to default, since we disabled it.
The Error reads:
The WinRM client cannot process the request. The WinRM client tried to use Kerberos authentication mechanism, but the destination computer <Exchange> returned an 'access denied' error. Change the configuration to allow Kerberos authentication
mechanism to be used or specify one of the authentication mechanism supported by the server. (How do I do this?) To use Kerberos, specify the local computer name as the remote destination. (I'm trying to use EMS while logged into the local Exchange server)
Also verify that the client computer and the destination computer are joined to a domain. (Exchange is on our domain, and the computer trying to connect is the same computer) To use basic, specify the local computer name as the remote destination, specify
Basic authentication and provide user mane and password. Possible authentication mechanisms reported by server.
At line:1 char:1
+ New-PSSession -ConnectionURI "$connectionUri" -ConfigurationName Microsoft.Excha ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : OpenError: (System.Manageme....RemoteRunspace:RemoteRunspace) [New-PSSession], PSRemotingTransportException + FullyQualifiedErrorId : AccessDenied,PSSessionOpenFailed
I assumed control of this exchange system already in place and I do not have much experience with exchange 2013 or server 2012. I do know 2008, but that doesn't help very much in this situation.
Recent changes to the system:
About three days ago we switch our sessions policy to allow many more connections, and I believe this caused the issue. This is what I changed it to:
Made the registry DWORD (32-bit) "Maximum Allowed Sessions Per User" and modified the value to 1000. Location of registry change @ HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\MSExchangeIS\ParametersSystem
I just changed it to 10 from the 1000. I'm hoping this solves this. So far no.
Also, I am not the best in the shell or command line interfaces. Any help would be wonderful!Hi,
Yes, could be hardware performance issue. Try recycle the Transport process and see if the issue persists.
Thanks,
Simon Wu
TechNet Community Support -
Hi
the scenario is
As per Notification No. 35/2004, in relation to the transport services, the onus of collection and payment of service tax has come to the recipient of the services unlike the provider of the services in other cases. Hence organizations are required to collect and deposit the tax with the govt. authority on behalf of the transporters.
here the mapping is to be done in sucha a way that postings must be as follows
x G/L freight clearing A/C - Dr
y G/L Freight vendor A/C - Cr
z G/L Service tax input ( 12% on 25% of Frieght) Dr
a G/L Ecess tax input ( 2%on 12 %) Dr
b G/L SHcess input ( 1% on 2%) Dr
c G/L Service tax Payable ( 12% on 25% of Frieght) Cr
d G/L Ecess tax Payable ( 2%on 12 %) Cr
e G/L SHcess Payable ( 1% on 2%) Cr
I had defined a Tax code with JSTX, JEC5 amd JEC 6
I had assigned the Accont keys VST, VS6, VS7 in the tax proceedure, and G/L accounts Input for each act key in ob40
but how to map the G/L acts payable
i tried to enter the payable amount MIRO, but for the client this is a lengthy way
i have one other way in OB40 ,go to rules iam seeing the debit/credit flag is locked , if iam able to check the flag for debit/credit, i may abl to assign the debit and credit G/L accounts.
If any one had gone through the same config
Hope some one might have mapped this business process.
please help me out how to do it.
krishnathnx
-
Hi,
I am trying to upgrade Exchange 2010 SP2 from SP1, but Transport service does not start automatically.
Tried manually start services, it started successfully but again goes down within few seconds automatically.
Reboot server. but no luck.
Any help.
MDHi,
I recommend you use event viewer to check if there are any relate event logs. This may help us to find the cause.
In addition, as Amit mentioned, Exchange 2010 SP2 isn't supported by Microsoft, I think upgrading to SP3 is a much more sensible approach.
Thanks.
Niko Cheng
TechNet Community Support -
I installed Exchange Server 2013 SP1 in my test environment. After that mail flow between internal and external mail servers completely stopped. In the end I discovered that Transport Service on both of the mailbox servers refused to start (or, to be more
exact, stopped shortly after starting).
The following events appeared in the System event log:
Event ID 1052 (error)
Source: MSExchange Extensibility
Message: Failed to create agent factory for the agent 'ScanMail SMTP Receive Agent' with error 'Failed to create type 'TrendMicro.SMEX.hookE12TransportAgent.hookE12SmtpReceiveAgentFactory' from assembly 'C:\Program Files\Trend Micro\Smex\hookE12TransportAgent.dll'
due to error 'type not found'.'. Please verify the corresponding transport agent assembly and dependencies with correct version are installed.
Event ID 16023 (error)
Source: MSExchangeTransport
Message: Microsoft Exchange couldn't start transport agents. The Microsoft Exchange Transport service will be stopped. Exception details: Failed to create type 'TrendMicro.SMEX.hookE12TransportAgent.hookE12SmtpReceiveAgentFactory' from assembly 'C:\Program
Files\Trend Micro\Smex\hookE12TransportAgent.dll' due to error 'type not found'. : Microsoft.Exchange.Data.ExchangeConfigurationException: Failed to create type 'TrendMicro.SMEX.hookE12TransportAgent.hookE12SmtpReceiveAgentFactory' from assembly 'C:\Program
Files\Trend Micro\Smex\hookE12TransportAgent.dll' due to error 'type not found'.
at Microsoft.Exchange.Data.Transport.Internal.MExRuntime.FactoryTable.CreateAgentFactory(AgentInfo agentInfo)
at Microsoft.Exchange.Data.Transport.Internal.MExRuntime.FactoryTable..ctor(IEnumerable agents, FactoryInitializer factoryInitializer)
at Microsoft.Exchange.Data.Transport.Internal.MExRuntime.RuntimeSettings..ctor(MExConfiguration config, String agentGroup, FactoryInitializer factoryInitializer)
at Microsoft.Exchange.Data.Transport.Internal.MExRuntime.MExRuntime.Initialize(String configFile, String agentGroup, ProcessTransportRole processTransportRole, String installPath, FactoryInitializer factoryInitializer)
at Microsoft.Exchange.Transport.Extensibility.AgentComponent.Load()
Event ID 701 (informational)
Source: MSExchangeTransport
Message: The service will be stopped. Reason: Microsoft.Exchange.Transport.TransportComponentLoadFailedException: Loading of component 'SmtpReceiveAgents' failed. ---> Microsoft.Exchange.Transport.TransportComponentLoadFailedException: The agent component
failed to load. ---> Microsoft.Exchange.Data.ExchangeConfigurationException: Failed to create type 'TrendMicro.SMEX.hookE12TransportAgent.hookE12SmtpReceiveAgentFactory' from assembly 'C:\Program Files\Trend Micro\Smex\hookE12TransportAgent.dll' due to
error 'type not found'.
at Microsoft.Exchange.Data.Transport.Internal.MExRuntime.FactoryTable.CreateAgentFactory(AgentInfo agentInfo)
at Microsoft.Exchange.Data.Transport.Internal.MExRuntime.FactoryTable..ctor(IEnumerable agents, FactoryInitializer factoryInitializer)
at Microsoft.Exchange.Data.Transport.Internal.MExRuntime.RuntimeSettings..ctor(MExConfiguration config, String agentGroup, FactoryInitializer factoryInitializer)
at Microsoft.Exchange.Data.Transport.Internal.MExRuntime.MExRuntime.Initialize(String configFile, String agentGroup, ProcessTransportRole processTransportRole, String installPath, FactoryInitializer factoryInitializer)
at Microsoft.Exchange.Transport.Extensibility.AgentComponent.Load()
--- End of inner exception stack trace ---
at Microsoft.Exchange.Transport.Extensibility.AgentComponent.Load()
at Microsoft.Exchange.Data.Directory.ADNotificationAdapter.RunADOperation(ADOperation adOperation, Int32 retryCount)
at Microsoft.Exchange.Data.Directory.ADNotificationAdapter.TryRunADOperation(ADOperation adOperation, Int32 retryCount)
at Microsoft.Exchange.Transport.SequentialTransportComponent.Load()
--- End of inner exception stack trace ---
at Microsoft.Exchange.Transport.SequentialTransportComponent.Load()
at Microsoft.Exchange.Transport.Components.Activate()
The reason for that behavior was TrendMicro ScanMail for Exchange 11. Seems that it was unable to work with the new SP properly and prevented the entire Transport Service from starting. Uninstallation of the antivirus eliminated the issue.Actually, you can just disable the agents until TrendMicro releases a patch and then enable them again:
http://community.trendmicro.com/...
BTW, a similar problem (high CPU utilization and services not starting) is hitting the AVG package:
http://forums.avg.com/..
Step by Step Screencasts and Video Tutorials -
Can any1 please help.
We have Exchange server 2010, we just upgraded it with SP3 and then the issue occers that we were unable to send n receive mail outside of our LAN...i mean from gmail or hotmail..
we have then updated with CU4 which is the latest but still messages will be placed in the poison queue and the transport service will crash.
We have disabled the antivirus also but issue remains same.
We have CAS 1 n 2 as of Clustering environment and we upgraded sp3 for both. but we did CU4 on CAS1 to see the results to resovle this issue but no luckHi,
Did you get any NDR message now when you send a email to outside? And vice versa.
In addtion,I recommend you telnet to port 25 to test SMTP communication.
If any question,please feel free to post here.
Thanks.
Niko Cheng
TechNet Community Support -
Exchange 2010. Unable to access block list IP's in Hub Transport Service.
Just started today as I was getting ready to add an IP address to the IPBlock list. Box pops up that says 'failed to enable key constraints. One or more rows contain values violating non-null, unique or foreign-key constraints.' The only
thing I have seen mentioned running the Get-IPBlockListEntry command because there was a duplicate IP address in the list. When I ran the command, there were 600+ entries, but I can only read the last 350 of them. There are no duplicates however
in the entries I can see.
My questions are:
is there a hard limit to how many ip addresses can be added into the block IP list box?
Is there a command that would search for duplicate addresses, and if not, is there another way to take care of the issue besides uninstalling and reinstalling the exchange anti spam agent?
How do I get to see the first 250 entries in the results from the exchange management shell?
Thanks for your help!Hi,
Please refer to the following steps to reinstall anti spam agent:
1. Open EMS, type:
cd "c:\program files\Microsoft\exchange server\v14\scripts"
./uninstall-antispamagentss.ps1
2. Restart the Exchange transport service.
3. Go back to EMS, type:
./install-antispamagent.ps1
4. Restart the Exchange transport service.
If the problem still happens, please restart Exchange hub server
Thanks.
Niko Cheng
TechNet Community Support -
How to cancel and redo a service confirmation?
Here is the scenario (Service management):
A Service confirmation has been created with status "Completed".
As a result the status of the originating service order is set to "Confirmed" (standard behavior).
Say the confirmation data was wrong and postings in R/3 needs reversing (for example for a spare parts goods issue).
Standard SAP allows you to Cancel the items in the Service confirmation which will automatically reverse all the postings in R/3. So far so good!
The problem is that I can't see how to recreate a new service confirmation. The status "Confirmed" on the Service order prevents you from creating any new follow up service confirmation.
Does anybody know the answer to this puzzle?
Thanks in advance for help !Hi
to redo the service confimation, you need to change the status of the service order to "released'.
Permanent solution:
The way service oder status changes automatically when service item is confirmed,trigger a action when a service cofirmation is cancelled so that the status of that service item changes back to released.
Maybe you are looking for
-
How to remove device off your Apple ID account
II'm trying to remove a device off my Apple ID account. How do I do that or if I am able to anyways? Shared an Apple ID account with a partner now it's over.
-
My HPE 490t has 2 x 1.5 GB system disks, in RAID 1 configuration managed by Intel Rapid Storage Technology. The computing power of this machine is more than adequate for my needs but the disk space & performance aren't. I have also had a few inciden
-
Driver for my Integrated 10/100 BASE-T Ethernet LAN
need drivers for integrated 10/100base-t ethernet lan driver win8 x 64bit i have the HP 15-d103tx Notebook PC here http://h10025.www1.hp.com/ewfrf/wc/document?docname=c04206739&tmp_task=prodinfoCategory&cc=us&dlc=en... please help
-
Hi Friends, Can any one tell me what is the difference between SAP XML and SAP IDOC XML? Regards, Kumar
-
Videos in keynote for ios do not play audio...
I have two quicktime videos that I want to play in a keynote presentation. The videos and their audio play perfectly out of my Photos folder on the iPad but when I insert them in a Keynote presentation, the video is great but the audio does not play.