Date Insertion Bug?

I have been trying to a date into a page in Dreamweaver CS5.5 using the Insert, Date function that is supposed to update on every save. However, every time it saves, it adds an extra "-->" at the end of the cgenerated code. When I attempt to manually remove it, and save it regenerates a new "-->" at the end of the code every time. Any ideas here?

I know where your answer is on a Mac only. If you are on Windows you will have to look for a similar file. But before answering I will say that this is something that gets installed with DW and being so, I would seriously give the overall installation a look and if more problems persist, consider de-activating (Help->De-Activate), using the Adobe Clean Tool ( http://www.adobe.com/support/contact/cscleanertool.html ) and then re-installing.
The file is located in the Dreamweaver application folder --> Configuration --> Translators --> Date.htm --> Line 20 is the line in question. Just remove the excess arrows you feel DW is printing.
Please keep in mind, this solution is in NO WAY SUPPORTED BY ADOBE. Editing this file incorrectly could lead to issues with the function and DW in general.

Similar Messages

Time and date reset bug

hu guys, recently ive been experiencing a time and date reset bug, sometimes when i open up my computer it says something like your date is set to (i forgot the exact date but the year is 2001) so i change it back to the correct time and date, im not sure how i got the bug, can anyone help me fix this problem, its beginning to be annoying. thanks in advance!!

Sherwin,
Those symptoms indicate that you need to get your backup (PRAM) battery replaced.If your computer does not retain parameter RAM (PRAM) settings when it is turned off, this generally indicates that the battery needs to be changed.;~)

Customizing data insert from

I have a data insert from that is solely used to insert data in a database. I am trying to figure out a way to customize it such that a few file get auto filled. I use the form to insert data in a table called maintable. 8 of the 10 field of this maintable filled from different vendor's table(currently i manaully put it). What I like to do is see if I can integrate the vendor's table in the page and write codes to autofill the form that put the data in the maintable. I know maybe a while statement will do it. So if in the form I input vendor's name and product id. it will get the data from vendor's table and relavent product to fill rest of the field. Any guidance will be greatly appreciated as I am very new to web development and don't have much experince in PHP codes.
Thanks

Maybe u can try like this. Assuming you have two inputs in form which I have assigned as below
$product_id = $_POST['pid'];
$vendor = $_POST['vendor_name'];
Then do check for vendor name input.
if(isset($_POST['vendor_name') && !empty($_POST['vendor_name'])) {
$query = " SELECT * FROM vendor WHERE vendor_name = '$vendor' ";
$query2 = mysql_query($query, $databaseName) or die(mysql_error);
$vendor = mysql_fetch_assoc($query2);
} else echo 'Vendor name doesn't exists';
$var = $vendor['var'];
assign for the rest values u want to store in maintable
//do insert record
$insert = INSERT INTO maintable .... VALUES ('$vendor', '$var',.....)

Combo Box doesn't persist data insertion settings

Hi,
I'm simply trying to setup a combo box that places the selected label into a destination table cell. I've tried about every combination possible to simply add a data insertion series. Please note, I AM clicking the plus button to add it to the list shown to the left of the settings. Unfortunately, everytime I have the series added and I click away from the selected combo box it loses the settings I just provided.
Has anybody else had these frustrating issues with the combo box component?
Thank you.

Greg,
The combo box component can be a bit fiddly at times. It would help if you let me know which version of Xcelsius you are using.
In any case if you are simply trying to insert the label to a destination you dont need to bother with the series at all. Try it in this order:
1) Drag a combo box component
2) In combo box properties pane and click on the range select button beside Labels
3) Select the range in your excel sheet that has the labels and click OK
4) Go back to the properties pane and choose Insertion Type: Label
5) Click the range select button beside Destination and select a cell
6) To test it drag a Text -> Label compoent in and point it to the destination cell you selected in step 5.
7) Preview to see if all is in order
Let me know how you get on.
Cheers,
Ryan

SQL server Timeout issue in data insertion

We are loading data from DB2 database to SQL server using Data flow task. During data insertion in SQL server, we are receiving the below error.
"An exception has occurred during data insertion, the message returned from the provider is: Timeout expired. The timeout period elapsed prior to completion of the operation or the server is not responding."
Kindly help to resolve this issue.
Thanks!!!

Check the connection timeout property of the source connection.
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/a5571966-b14e-45c6-9ce8-4f5651d3ee00/ado-net-destination-timeout-issue?forum=sqlintegrationservices
Regards, RSingh

Exception has occurred during data insertion ... Wrong number of parameters

I am using an ADO dataflow source and an ADO dataflow destination to move data from a table on an IBM iSeries DB2 database to another IBM iSeries DB2 database on another machine. The connection managers for source and destination both use .Net Providers\Odbc
Data Provider with the Data Source Specification being ODBC connections specified on the Windows Server 2008 r2 machine hosting bids. All the test connections work...so far so good.
Issue is when I execute the control flow task the rows get picked up from the source DB2 database no problem but it fails on the insert to the destination DB2 table...The progress tab specifies the exceptions...
[ADO NET Destination [601]] Error: An exception has occurred during data insertion, the message returned from the provider is: ERROR [07002] [IBM][System i Access ODBC Driver]Wrong number of parameters.
[SSIS.Pipeline] Error: SSIS Error Code DTS_E_PROCESSINPUTFAILED. The ProcessInput method on component "ADO NET Destination" (601) failed with error code 0xC020844B while processing input "ADO NET Destination Input" (604). The identified
component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running. There may be error messages posted before this with more information about the
failure.
I put a data viewer on the data flow connection and the records I expect are getting picked up and look ok. I checked to make sure the source and destination tables have the same number of columns in their record layout and identical data
types and they look fine.
Could someone kindly tell me whats going wrong? Does the error message indicate that some of the columns are getting dropped from the dataset before the insert?
Thanks much in advance for any help, Roscoe

Hi Roscoe,
Glad to hear that you have found the root cause. So, the issue occurs because numeric values with no decimal cannot be inserted into the Decimal data type column in the DB2 table. In SSIS, data type Decimal of DB2 database is mapped to data type DT_NUMERIC.
To address the issue, you can do a data conversion for the column in question to define its precision and scale such as DT_NUMERIC(9,2) by using the Data Conversion Transformation before the ADO NET Destination.
Regards,
Mike Yin
If you have any feedback on our support, please click
here
Mike Yin
TechNet Community Support

Disabling data insertion in WFTASKHISTORY

Hi
In Orabpel.WFTaskPkg .. a procedure called 'updateTask' is defined;
In the procedure following line is executed :
IF p_IsVersionable = BOOLEAN_TRUE_STRING THEN
createHistory(p_taskID);
END IF;
It inserts a record in the WFTASKHISTORY table if p_IsVersionable = true....
Is it possible to set the value of 'p_IsVersionable' so that I can control the data insertion in WFTASKHISTORY table ? Any pointer will be helpful!!
Thanks

Hi Satish, this is an interesting question and as Michaela points out, Comments should be used to store non numeric data elements.
However, your question makes me wonder what exectly do you want to enter characters for ? How would your use of characters for an amount be defined ? In case you would like to tell something about the amount (like the 100 for write-off is due to a customer not paying any bills), then you would use comments. I can imagine however that you want to use characters for sanother reason like adding new memebers to the database, but then you have to follow a different procedure.
So please explain to what other use of characters you are thinking about.
Best regards,
Edwin van Geel

[SOLVED] EXT4 Data Corruption Bug Linux 3.6.2 & 3.6.3

Be careful
EXT4 Data Corruption Bug Hits Stable Linux Kernels
http://www.phoronix.com/scan.php?page=n … px=MTIxNDQ
https://lkml.org/lkml/2012/10/23/779
Edited: Removed the [ALERT] label.
Last edited by ontobelli (2012-11-01 04:58:43)

headkase wrote:
Even though it is a severe bug the chances of it happening to you are low. You have to unmount and immediately remount an EXT4 partition twice in a row for it to happen. On a normally operating system that is not a normal thing to happen. Just wait on your desktop for 5 minutes before rebooting again.
Arch, as a general rule, tends to stick as close to upstream as possible. I'm sure the devs are very competent people but a quick hack or branch revert has the possibility of introducing issues of its own. With the chance of the bug occurring low on a normally operating system I think it is better to wait for a fix from upstream.
Well maybe i am a bit over stressed about this since with this computer i have quite a lot of troube which i cannot find solutions to. Also a kernel panic after a reboot this morning -probably not related to this- got me in a bad mood.
Anyway.

Spatial data insert problem

Hello,
i want to make an spatial data insert, but it doesn't work well. Help would be fine.
create table SCHIFFSPOSITION(
SCHIFF_ID                    NUMBER NOT NULL,
SCHIFF_NAME                VARCHAR(25),
SYS_POS_SN               VARCHAR(25),
SYS_LAT_P4_DER               VARCHAR(15),
SYS_LON_P4_DER               VARCHAR(15),
GEOM                          SDO_GEOMETRY,
constraint PK_SCHIFFSPOSITION primary key(SCHIFF_ID));
insert into MDSYS.USER_SDO_GEOM_METADATA values ('SCHIFFSPOSITION', 'GEOM',
SDO_DIM_ARRAY (
SDO_DIM_ELEMENT ('Longitude', -180, 180, .0005),
SDO_DIM_ELEMENT ('Latitude', -90, 90, .0005)),8307);
create index SCHIFFSPOS_IDX on SCHIFFSPOSITION(GEOM) indextype is MDSYS.SPATIAL_INDEX parameters('sdo_indx_dims=2, layer_gtype=point');
INSERT INTO SCHIFFSPOSITION(SCHIFF_ID, SCHIFF_NAME, SYS_POS_SN, SYS_LAT_P4_DER, SYS_LON_P4_DER,
MDSYS.SDO_GEOMETRY(2001,8307, MDSYS.SDO_POINT_TYPE(SYS_LON_GRAD_DER,SYS_LAT_GRAD_DER,null),null,null)))
VALUES (1, 'METEOR 63', 'GPS', '33° 54,4246 S', '18° 25,9184 E', '18.4319736', '-33.9070772');
thank you very much

Hi,
please insert that way:
INSERT INTO SCHIFFSPOSITION(SCHIFF_ID, SCHIFF_NAME, SYS_POS_SN, SYS_LAT_P4_DER, SYS_LON_P4_DER,GEOM)
VALUES (1, 'METEOR 63', 'GPS', '33° 54,4246 S', '18° 25,9184 E', MDSYS.SDO_GEOMETRY(
2001
,8307
, MDSYS.SDO_POINT_TYPE(
    18.4319736
    ,-33.9070772
    ,null
,null
,null
)

Massive data loss bug

Leopard's Finder has a glaring bug in its directory-moving code, leading to horrendous data loss if a destination volume disappears while a move operation is in progress. This author first came across it when Samba crashed while he was moving a directory from his desktop over to a Samba mount on his FreeBSD server. Here's the link - http://tomkarpik.com/articles/massive-data-loss-bug-in-leopard/ I hope Apple would get this fixed soon.

That is actually the safest and easiest option.
Seems easier to command-click drag and drop to me. Losing data is not acceptable under any circumstance.
Everything has been precisely calculated
I don't think that data loss is something that was purposefully precisely calculated.
A short term fix would be for Apple to disable the command-drag n' drop altogether, long term would be to fix the root issue in the first place.
Am shocked to hear that this data loss bug has been known about since 10.3.

How is the data inserted into JTF_RS_SALESREPS?

Hi,
I wanted to know how is the data inserted into JTF_RS_SALESREPS.When we import the resources from CRM Foundation responsibilty the data will be inserted into jtf_rs_resource_extns.I think we need to run a concurrent program to transfer data from jtf_rs_resource_extns to JTF_RS_SALESREPS.
Which Concurrent program should be run?
Please help.
Thanks.

How is the data inserted into CST_INV_QTY_TEMP table ?TABLE: BOM.CST_INV_QTY_TEMP
http://etrm.oracle.com/pls/et1211d9/etrm_pnav.show_object?c_name=CST_INV_QTY_TEMP&c_owner=BOM&c_type=TABLE
Thanks,
Hussein

How is the data inserted into CST_INV_QTY_TEMP table?

Hi All,
How is the data inserted into CST_INV_QTY_TEMP table ?
Thanks in advance,
Mayur
Edited by: 928178 on 17-Apr-2012 04:29

How is the data inserted into CST_INV_QTY_TEMP table ?TABLE: BOM.CST_INV_QTY_TEMP
http://etrm.oracle.com/pls/et1211d9/etrm_pnav.show_object?c_name=CST_INV_QTY_TEMP&c_owner=BOM&c_type=TABLE
Thanks,
Hussein

SQL DM - Copy/Export data models - bug?

SQL DM - Copy/Export data models - bug?
I am using SQL DM 3.0.0.665. I need your thoughts on following.
We used saved as/export of the SQL DM copy the model into another location. We kept our models in harddrive as folder. We did not store it in database.
We opened the copied model from target model. We found all the links to defined domain was lost. We find the data type shows as Varchar2 instead of Varchar2(20)etc. It creates error on sql.
Why are loosing the domain definition/linkages during export/save as option?
Is it a bug?
Did anyone face such issues?
What is the workaround?
Thanks in helping us out.

Hello,
Thanks for your reply. I followed the steps. I did copy the folders/files as Kent suggested.
As we installed the SQL developer on new desktop, it showed the domain definitions as unknown and count as 1 in Design Tree --> domain node. We copied all the xml files under C:\datamodeler\datamodeler\types folder of Desktop A to Desktop B. It brought all the domain definitions of Design in Desktop A.
Why does it not keeping this domain definitions as part of Design folders?
If we copy or save as the design , then domain also cane be saved as part of design. It will be difficult to make a sync of datamodels among multiple desktops.
How do we establish a shareable/sync data models using SQL data Modeler on such situations?
Thanks in helping.

Strange data inserted into table via table trigger

Hi ,
There is some strange phenomenon happen occasionally where some tables update records will have a TRIGGER to insert records into a table and once in a while, the record has some strange data inserted which looks like a memory corruption. It is running on 10.2.0.3.
Does anyone ever encounter this before?
Strange result:
PRIM_KEY
-3.614364951000000000000000000000000E-47
-3.614364951000000000000000000000000E-47
Normal result:
PRIM_KEY
1137KT
1137KT
ana

Hi,
What is strange in this? Its not memory corruption. Its just one of the numeric form of representation of number
-3.614364951000000000000000000000000E-47it means -3.614364951 * 10 to the power of -47.
Whatever value has been entered into the table depends on your business logic you coded, and user input.
Regards

How to data insert Source server and Linked server (Target Server) at same transaction

I have try several times for Data insert Source server and Linked server (Target Server) at same transaction. I am using Begin transaction. but Source server is completed and Linked server error (or Linked server Completed and source server
ERROR). at this moment I want ROLL back. how?

Hi
Run below query by changing to yourr linked server name and see if DTC is enable or not.. if not
Begin distributed transaction
select * from [ServerName].master.dbo.sysprocesses
Commit Transaction
To enable MSDTC on each Web server on Windows Server 2008
Click Start, click Run, type dcomcnfg and then click OK to open Component Services.
In the console tree, expand Component Services, expand Computers, expand My Computer, and then expand Distributed Transaction Coordinator.
Right click Local DTC, and click Properties to display the Local DTC Properties dialog box.
Click the Security tab.
In the Security Settings section, click Network DTC Access.
In the Client and Administration section, select Allow Remote Clients and Allow Remote Administration.
In the Transaction Manager Communication section, select Allow Inbound and Allow Outbound.
In the Transaction Manager Communication section, select Mutual Authentication Required (if all remote machines are running Windows Server 2003 SP1), select Incoming Caller Authentication Required (if running MSDTC in a cluster), or select No Authentication
Required if some of the remote machines are pre-Windows Server 2003 SP1. No Authentication Required is the recommended selection.
Select Enable XA Transactions, and then click OK.
Repeat steps 1 through 9 on the other Web servers.
Thanks
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers

Date Insertion Bug?

Similar Messages

Maybe you are looking for