DC Creation Problem in MSS track in NWDI

Hi all,
I have created a Development Configuration in my studio and can see all the MSS DCs, create a local project, check out the existing DCs in the Track etc.. I have NWDI administrator access and can also log into CMS and DTR. But when I tried to create a new DC (For a brand new custom development) in the MSS Software Component of the same track, I am getting "DC creatin failed error". Can any one suggest me what are the permissions I need to have to create a new DC and if any setting needed in CMS or DTR. Any pointers will be highly appriciated.
Regards
Ramesh.

HI,
Apart from Administrator, you must have NWDI developer role assigned to your user.
Regards,
Satya.

Similar Messages

Conflict for a XI track in NWDI on the assembly tab

Dear friends,
I have defined a XI track in NWDI/CMS. But on Assembly tab I get a conflict error. The log message is:
Info:Starting Step Check-assembly at 2008-01-21 17:42:04.0367 +0:00
Info:Checks for software component A_TEST are performed now:
Info:Checks for software component A_TEST finished succesfully
Info:Checks for software component I_FGT are performed now:
Info:Checks for software component I_HGFfinished succesfully
Info:Checks for software component HGF are performed now:
Info:Checks for software component A_HGF finished succesfully
Info:Checks for software component O2C are performed now:
Info:7XI conflicts
Info:Step Check-assembly ended with result 'error' ,stopping execution at 2008-01-21 17:42:07.0394 +0:00
Can you help where to look and what to do?
Kind regards,
Kamran

Hi
The following logs exist for the assembly step:
●      Check-assembly: Checks whether the prerequisites for a successful assembly exist. The following individual checks are performed:
○       Are there open build requests in the buildspace?
○       Are there open conflicts in the workspace?
○       Are there any broken DCs in the build compartment?
○       Are there any dirty DCs in the build compartment?
○       Are there any problem DCs in the build compartment?
○       Are there any pending activities that are not yet completely activated?
For detailed monitoring of a central build, use the Web UI of the Component Build Service (CBS).
http://help.sap.com/saphelp_nw04s/helpdata/en/ab/40833c87ac4d0cb5c4c44da8259386/frameset.htm
If the track deletion in CMS should fail for some reason, CBS administrators can delete a buildspace manually.
       1.      Start the CBS Web UI.
       2.      Navigate to the Buildspaces view.
       3.      Select a buildspace to delete.
       4.      Choose Delete.
Let me know if this could help you
thanks
Swarup

Unable to deploy DC in mss track

Hi,
I created a new DC in mss track and was able to build it successfully.I checked in that DC and was trying to deploy that DC.but it has been in the queue for a long time and when i looked at the TCS/Deployer there are no queue requests.
but when i look at the activities in CBS it says the activity that contains DC is QUEUED
what is the problem with the Deployment
points will be awarded for sure

Hi,
Open the CBS GUI (http://<host>:<port>/webdynpro/dispatcher/sap.com/tc.CBS.WebUI/WebUI). Check whether the "Request Processing mode" is "ON" for the relevant Buildspace.
If it is "OFF", click "Edit" and change the "Request Processing mode" to "ON". Save the change.
Also ensure that the "Disable Automatic deployment" is not checked for the runtime system in Landscape Configurator.
Hope this helps !
Regards
Srinivasan T

Error While Creating Runtime Systems on an Existing Track in NWDI

Hi,
There is already a track in NWDI with No runtime Systems.
I have to create the RunTime Systems to do development on this track.
When I try to select the Development checkbox in Runtime systems,
select configure without wizard, Gave   Deploy Host name: **********.com
            Deploy Port :50018 (SDM port)
           Deploy PSWD: SDM Pswd
It gives me a warning..
Synchronization of Runtime System triggered for system dev. Log can be found at
http://*****************************LogViewer?LogName=%2Fsapmnt%2FEPQ%2Fglobal%2FTCS%2FLOG%2FEPQ_WHRBD_D2010081322030045.log&Bsname=EPQ_WHRBD_D
When i go to the log file
I see this Error Message
20100813180502 Info   :cannot create a connection for the buildspace: EPQ_WHRBD_D //connect to deploy tool failed:Server <Host Name> did not accept login request as admin on port 50018. Details: ERROR: Could not establish connection to <Host name> at port 50018: Connection timed out:could be due to invalid address
Can you please tell me what could be the Reason.
Basis has already opened the Ports : http port and SDM Port.
I am able to ping the server from cmd prompt.
Points will be allocated for the answer.
Thanks.
Venkat

Hi,
There's no need to update CMS or to check whether the buildspace is open, do not click on JSPM flag (unless you need nwdi control at upgrade)...
The error message means only that from the host where you configure the RTS the SDM cannot be reached or logon request cannot be accepted.
This can be either , because the
- SDM password is wrong (you checked it already)
- the port is wrong (you also checked it. If this is really a 700 RTS, i.e. it has SDM, and the instance number is 00, then the port is really 50018, so this should be fine as well. Only mention, because as of 71X we use the P4 port 5<xx>04 for the deploy controller, as there's no more SDM). Still you can use "netstat -a" to see the status of the ports.
- The host is wrong. I agree with Dao, check not only FQDN, but also IP address.
Using this guide you can always check whether the entered data is correct:
http://wiki.sdn.sap.com/wiki/display/TechTSG/%28NWDI%29%28CMS%29Q0002
Best regards,
Ervin (http://wiki.sdn.sap.com/wiki/display/TechTSG/%28NWDI%29Home)

Problem with MSS Launchpad

Hello folks,
We are facing some problem with MSS Launchpad after the service pack, we have checked sicf, lpd_cust and done most of the troubleshooting steps,reached to point where we found table T77MWBFCD and changed the URL value here, launchpad worked but the URL which we want to work and which was working fine in the past has stopped working.
Any help will be appreciated.

Hi everybody,
finally we managed to fix this bug on our own.
We set up the Managers Desktop (MDT) as suggested by SAP. But the MDT's reports could not be converted to the launchpad.
Then we recognized via debugging that for any reason the following entries were missing in table FPB_LP6_SNI_REQ:
- Role ROLE C 3 MSS
- Instance INSTANCE C 3 REP
Adding these entries manually fixed the problem.
Regards,
Dennis Bohlmann

Tracks in nwdi

Hi, there are tracks in nwdi and need to do mofification if requriement and want to deploy the trackinto new server from old server? how to deploy the tracks in new server from old server?

Hi,
please have a look at this thread:
Moving changes from one NWDI (or track) to another
Copying track with all dc's from one server to another in DI
Best Regards,
Ervin

How to Create Track in NWDI for CRM ISA 5.0

hi
can anyone please suggest me how to create track in NWDI for CRM ISA 5.0 for different archive files which consists of source files like(ex: SAP-SHRAPP.SCA,SAP-SHRWEB.SCA, e.t.c.) and as well as empty source files like(ex: SAP-SHRAPP.SCA,SAP-SHRWEB.SCA, e.t.c.).
As far as i know SAP does not deliver sources for SCs SAP-JEE,SAP_BUILDT and SAP_JTECHS so we cant have them as "Developed Software Components" when we eg:want to modify the SCs SAP-SHRAPP.SCA or CUSTCRMPRJ.SCA.
here what i want to know is depending on which SCs we actually want to modify, based on that our track want to be Configured differently.
My question is how to configure the Track in NWDI for this kind of scenario.
If the source is not given and only required software components are given then how to create track in NWDI. for example in CRM ISA 5.0
Regards,
Chandra.

SAP documentation is there in service market place for NWDI setup under netweaver. If you dont find document post your email id, I will send you the document.
regards,
Laxman

How to modify ESS/MSS iviews without NWDI

Hi Everybody,
The last couple of day's I have been searching the forums to find an answer to the above mentioned question. Is there a way to modify the ess/mss iviews without NWDI?
I have tried allmost anything I could think off... Unzip the files and import the files manualy into nwds etc...
After while I saw a posting that SCA files could be imported in the latest version of NWDS, I was able to import the SCA files of SAP into NWDS 7.1, but I am not able to create a project out of them. Probably this will also lead to issues when uploading the newly build sca files into portal 7.0.
Can anyone help me?
Thanks in advance.
Kind regards,
Xander

Hi Xander,
Some time ago I had the same question as you and as you I tried several things to load the SCA file to NWDS but after several tests it was loaded but without the screens.
I was able to create the project but it was missing many things when I tried to compile the project, the reason for this is that the ESS Package has a dependency in other SC as specified in the SAP Note 872892 - JDI/NWDI Cookbook for ESS/XSS (NWDI.zip File).
When you have all the dependencies (SCA files) it is a bout 700 MB which is a lot to load locally and figuring out exactly what you need will take a long time so at the end I could not use any trick to avoid the use NWDI as I only had to do 1 change to 1 DC ess/ca/padata so installing NWDI was an overhead for that only change, but at the end I have to do it.
I found the same posting as you and it seems NWDI 7.1 has the feature to do exactly what we needed.
But if you want to modify just the iviews as you are mentioning in your post you can do this straight in EP Content after copying your own content from the SAP standard content to do your modifications.
Best regards,
Juan Jose

Problem configuring CAF / GP on NWDI

Hi expert,
I am newbie in using CAF and JDI. Currently I required to configure CAF / GP on NWDI and I have followed the steps recommended in "Installation Cookbook - Configure CAF / FP on NWDI 7.00".
I have also download the archives as listed below and imported them successfully to CMS:
SAPJTECHS.sca
SAPBUILDT.sca
SAPJEE.sca
BIUDI.sca
BIMMR.sca
SAPEU.sca
CAF.sca
CAFKM.sca
However, as I try to import them to the Development System, the browser response with the status "Import failed" . I look at the log files, and saw something like this:
Info:Starting Step Repository-import at 2007-06-12 15:16:17.0375 +8:00
Info:Component:sap.com/BI_UDI
Info:Version :SAP AG.20070131230600
Info:1. PR is of type TCSSoftwareComponent
Info:==> sources will not be imported for this SC
Info:Step Repository-import ended with result 'not needed' at 2007-06-12 15:16:17.0406 +8:00
can advise?
Thank you.

Hi
I have looked through the System SIC -> monitor, I released that there is appropriate version of SCA in the server. Does that explain the following error message ?
Info:==> sources will not be imported for this SC
Info:Step Repository-import ended with result 'not needed' at 2007-06-12 15:16:17.0406 +8:00
Even with that components, I have skipped the following steps
9) import the checked in archives into the Development system (which is unsuccessful)
10) import the checked in archives into the consolidated system
11) configure runtime systems in the track
12) import the development configuration
And I proceed to the steps Chandan has advised:
4. Now go to the NWDS and set the URL of server in Development Configuration perspective as per the doc.
5. Now Login through user id and password from NWDS.
6. select your track and import it.
In NWDS, I went on to locate my component in the tracks and want to create local Web Dynpro DC with the dependencies set. So I right click and select Create New DC... and sync it as Web Dynpro.
Then I encounter the following error:
Development Component Creation completed with some problems.
Reason:
some used DCs are not available locally,
you have to sync used DCs for this project.
I decided to sync the DCs by right click on the Used DCs folder and select Add Used DC...
From there I went on to select sap.com_SAP_JTECHS. As I expand the tree for this, there isn't any component for me to sync.
I cannot proceed if there is missing components and the components:
webdynproruntime_designtime_coupling_api.jar
webdynproruntime_designtime_coupling.jar
webdynproruntime_designtime_repository_pmr.jar
webdynproruntime_designtime_repository.jar
webdynproruntime_services.jar
webdynpromodel_dynamicrfc.jar
webdynpromodelimlp.jar
webdynproprogmodel.jar etc
I realise that they are from SAPJTECHS which already in the NW.
Can help?
Thanks

Problem with CMS track for a SCA

Hi,
in my NWDI, I have a track which contains a SCA (for SAP_ESS),
can i chekin that track in my local NWDS, modify that DC (the webDynpro project), and directly deploy it from my NWDS studio on a sap j2ee server, instead of cheking out and importing that track in subsequest runtime-systems, (i am trying to do so, because i have a problem getting that sca deployed in the subsequest runtime systems)
please help

You will have to create a track for the ESS content in NWDI and then check out the DC which you are looking to modify. You can always test the application directly by deploying it from NWDS - Check in is not necessary if it doesnt have any dependencies on other DC's / objects.
Thanks,
GLM

Database creation problem on Windows XP

Hello Readers
I have installed ORACLE Database Engine on windows XP.
I am facing problem in database creation.
I have tryed wizard as well as mannual method.
in wizard at 90% it gives an error "END-OF-FILE ON COMMUNICATION CHANNEL"
although CD drive is in CR Rom drive.
Please help me ....
Rashid Masood Ashraf
email: [email protected]

After going to the properties as you suggested:
Right now the Obtain an IP address automatically is checked
I need to check the Use the following IP address:
What should I enter for
IP address:
Subnet mask:
Default gateway:
Please help.
Edited by: Nel Marcus on Dec 2, 2008 3:49 PM

Remittance challan creation problem in Cross company code scenario.

I made to Advance payment to Cross comany code while posting time we deduct the TDS amount. at the time remiottance challan creation i got bellow error.please help to me
No unpaid tax lines exist for the given selection criteria.
Message no. 8I702
Diagnosis
The corresponding withholding tax line &1& is not present in WITH_ITEM table.
System Response
For withholding tax recovered from the vendor, tax line is present in table BSIS, but the corresponding entry is missing in table WITH_ITEM , which is necessary for challan updation. Check the entries.
Procedure
check entries in table WITH_ITEM for the open tax items chosen for clearing.
Edited by: TEEGALA SATISH on Jun 15, 2010 5:43 PM

Hi ...Actually i am getting same problem in challan creation.. Did you get any solution? ...

Process order creation problem

I am creating a process order . while creating the process order system is throwing error as Auto batch numbering not set up for material type XXXX in plant xxxx . System is not allowing to create process order.
How to resolve the issue.

Check in CORW and switch off batch creation to isolate the problem if needed. Also see whether you have any batch managed compoents for which you have set master data for automatic batch determination.
There is no setting for material types and plant for batch. May be the error message is not correct. What is the message number?

New Excise Invoice Creation - Problem

Hi All,
I am facing problem in creation of Excise Invoice. I dont know the step by step process, can any one help me to get this ?
Best Regards
Chintesh Soni

Hi Chintesh,
if you are referring to a 100% tax invoice, please see note [887917|https://service.sap.com/sap/support/notes/887917] for 2 workarounds.
All the best,
Kerstin

ITunes 11.1.3.8 on Windows 8.1 64 bit display problems with CD tracks and Internet Radio

Recently installed iTunes 11.1.3.8 on a Windows 8.1 64 bit machine and I have the following problems:
1) Inserting a CD in order to listen or import tracks I get no display of tracks when I click the CD drive in the side bar. The list has only white and gray lines where the tracks should have been listed and the top of the table contains some grabbed display from Music table (i.e. the first track that was displayed in Music but only 2/3 of the line. The status bar at the bottom of the iTunes window shows correct information about the number of tracks and total playing time.
2) Hitting the play button while on this CD Drive listing starts the playback but the tracks play in random sequence even though shuffle play is not selected (not blue to be precise). In the zone with track name, playback progress, elapsed and remaining time and other track options the indications are correct.
3) Importing the CD works but the tracks are imported in random order. Track information from CDDB providers is accurate eventhough nothing is displayed while selecting CD drive as per problem 1). Imported tracks in Music show in random order. This is also strange because when I was importing something from a CDDB indexed CD or even a non indexed one the tracks were always imported in the order they were written on disc.
4) Going to Music -> Internet I get the same white and gray lines with no stations displayed but this time the status bar reads Zero Stations. Obviously I can't select/listen anything
I'd say I'm quite experienced with iTunes, using it since 2005 but never had problems of this type. Some assistance would be helpful. I smell a bug that maybe shows up in my particular configuration. Searched everywhere, maybe not good enough, but couldn't find something even similar.

i have the same problem no radio stations at all bit shabby hate technolgy now adays

DC Creation Problem in MSS track in NWDI

Similar Messages

Maybe you are looking for