Decimal places default

Hi
Is there any way of setting a default number of decimal places for a new column added on a deski report, so that any new column added on any report will always take this default number of decimal places?
Thanks

Louise,
Within the designer module you can set the default format for any of the objects within the universe.
In the report that than will be the default format used. If you add a new column to the report the new column gets the same format as the column where you started from. So if you are in a column where the format is 3 decimal places and you insert a new column to the left or right that new column format will also have 3 decimal places.
Regards,
Harry

Similar Messages

  • Change Decimal Places Default

    Hello, wonderful internet people & fellow Illustrators
    I'm wondering if it's possible to change the decimal place accuracy to default to only rounded numbers i.e. 1mm instead of 1.325. I want EVERYTHING to snap to the nearest mm (Axis, Dimensions etc.) rather than 1.233 for example.
    Yes, I can manually type into the dims / axis boxes everytime but thats a chore.
    Any help is greatly appreciated! TIA

    Neil,
    I am afraid that any rounding would only affect what you see and give you what you get already.
    You may ease some of the pain by adjusting the Edit>Preferences>General>Keyboard Increment.
    The original default is 1 point (1/72 inch or just under 0.3528 mm, more precisely 0.352777777 etc).

  • Decimal places in standard input schedule templates

    Hi Gurus
    I have created some input schedules using standard template. User here will be entering some values in 2 decimal places (like 1.25) but when I enter any values in the cells, it automatically round off the values and displays values without any decimal places.
    I have tried changing the formats in Format control panel by changing the DATA / DEFAULT 's PATTERN / ALL for ROWs but it did not help.
    Please help how to resolve this.
    Cheers
    Swathi

    Hi nilanjan,
    Thanku, I resolved the issue using Format Range option with the below code
    CRITERIA    EVALUATE IN  FORMAT     USE     PARAMETERS    APPLY TO
    INPUT          ROW                1234,56      ALL                --                   DATA
    Thanku

  • PO print preview displays incorrect setting in decimal places

    Dear Experts
    Please help me on the following condition.
    I have a problem in print preview of a PO. It displays the incorrect setting for decimal place in currency.
    It shows USD 1.404,00 whereby the amount should be USD 1,404.00
    This only happens to a certain vendor that is doing PO for the first time from that country
    Example:
    I'm creating a PO for vendor 123. Vendor 123 is located in country A. No PO has been created for any
    vendor in country A before. When I saved my PO, in print preview, the decimal setting is not correct.
    But when I'm creating another PO, for vendor 234. Vendor 234 is located in country B. There have been
    several POs created for vendors in country B before. When I saved my PO, in print preview, the decimal
    setting is correct.
    Both vendor 123 and vendor 234 is using currency of USD.
    Is there any other setting with the vendor master in regard with the currency decimal setting for each
    country for the vendor? Or something that I've missed out?
    Diagnosis:
    I've checked with the user profiles->default-> decimal notation. It displays 1,234,567.89 correctly
    I've also run OY04, but the decimal setting is correct.
    Thank you
    Regards
    Syukri

    this has nothing to do with print preview, it is just basic country setting (OY01) how a quantity and value is written on a PO to a vendor is country xyz.
    German uses to comma to seperate decimals, while USA uses the point to seperate decimals
    this would be the German version 1.404,00, and this the US version:: 1,404.00
    so if an American sends a PO to a German vendor, then the document will show 1.404,00 so that the German can understand that he wants 1404. (and not 1000 times less)

  • U261B An Issue due to 3 Decimal Places in Percentage - Help Required

    I've an Issue in BEX report output, which is like when I try to create a 'Percentage' computation on a Key Figure Value, I'm getting 3 decimal places as 'default' output.
    The 'Calculations' settings I made for this KF is
    > Calculate Result as ... Nothing Defined
    > Calculate Single Values as .... Normalize According to Next Group Level Result
    > [✔] Apply to results
    > Calculation Direction - Along Rows
    ☹  I ran SAP_RSADMIN_MAINTAIN and set object 'IGNORE_T006_ANDEC' to the value 'X' - Not woking! Should I choose Update/Insert/Delete??
    ☹  T006-ANDEC & T006-DECAN for '%' has 0 decimal places only. Am I checking the correct stuff?
    ☹  OSS note 866505 not helpful for my issue. BW 7.0 Stack
    I'm getting my output as expected, but the only worrying factor is 3 decimal places due to the 'Calculations'. I'm unable to resolve using existing methods. Should I raise an OSS Note for this?
    Please help...

    Hi, I posted a message to SAP on this topic and got an explanation - it is a behaviour that cannot be changed in certain cases:
    it is the known design that it is always displayed with three decimal
    places for normalized values and the setting in Query Designer for
    decimal place doesn't take effect. This is because that normalization
    changes the number dimension of this structure element.
    You may refer to below notes about more details.
    > 869135 Decimal places and scaling for "Calculate Single Values As"
    You cannot set the number of decimal places or the scaling for some
    columns or structural components.
    For 2: Some "Calculate As" functions change the number dimension of a
    KID. In this case, the scaling and the number of decimal places set for
    the KID are no longer relevant. In this case, the system ignores the
    original setting and selects a setting that corresponds to the new
    number dimension. This cannot be overwritten. The following functions
    are affected:
    Calculate Single Values as Scale to Result, Overall Result or Query
    Result: Scaling 1 and three decimal places.
    > 501930 Number of decimal places setting is not applied
    As a result, normalized values resulting from the list calculation are
    displayed with three decimal places and without scaling by default.
    best regards, thom

  • Error in Decimal places.

    Hi Experts,
    my client is using ECC 5.0 now we have the problem with decimal places when the customer posts the transaction with USD,the problem is rising. For Ex: If the PO is raised in USD 500,but the system is updating only as 50 USD.
    Your valuable advices will be appreciated.
    Thanks & Regards,
    Vasu.

    Hi,
    Please check the user specification maintenance in SU01 t.code and select the Tab of Default and change the Decimal Notation.

  • Issue with display of decimal places

    Hi,
    In our custom built components we are facing a strange issue with the display decimals  where the data type of an element is "QUAN - Quantity field, points to a unit field with format UNIT".
    If the element has a value of 3000.000 KG the value is displayed as 3000. Where as for an element which has a value 3000.123 KG the same is displayed as it is with the decimals. We tried to resolve the issue by using Text editor or Input field as read only but in vain. The display property in the context are set to default.
    If we change the element data type reference to "Dec - Counter or amount field with Comma and Sign" then all the values are displayed with the decimal places even if decimals are zero.
    As a result we are facing alignment issues for the various quantity related elements displayed on the screen.  To change the underlying data type of the element is a not a solution for us as the data type quan is required for conversion from one unit to another unit.
    Can someone please advise how we could resolve this issue.  We are on NW 7.0 + EHP4 + NW 7.01 SP4, kernel patch level 55 for 7.01
    Regards
    Rohit Chowdhary

    Jameel, Thanks for the answer but this is a not a solution for us. We have around 40-50 webdynpro components and with mutliple views referring to this data element / domain combination. More so the context are bound to database tables / structures . 
    I hope to get a reply from Thomas on possible solution for this. I am not sure if I can open an support ticket for this issue.
    Rohit Chowdhary

  • Decimal places in unit of measure in Sales order

    Hi,
    In the Sales Order application in PCUI, when I create a create an order for customer XYZ, and add product ABC for qty 1 which uses unit of measure PC, the qty is displayed with 3 decimals as 1,000 whereas if I use the unit of measure EA the quantity is displayed without the 3 decimals as 1. I need the unit of measure PC to not have the decimal places like in SAPGUI.
    Could anyone help me understand how this can be achieved?
    Thank you for help in advance.
    Regards,
    Priya

    To elaborate better.
    Again, use Tcode CUNI - Unit of measurement : Initial Screen.
    At initial screen, choose TIME from the list (where by default AAAADL- no dimensions is there).
    And click on UNIT OF MEASUREMENT button.
    In that you will find MON - Month.
    There go for details by selecting MON or select MON and press F5 from Key board.
    For MON unit maintain following parameter as per your requirement:
    -Number of decimal places for number display
    Use - This parameter determines the number of decimal places with which this measurement unit is displayed.
    -Base ten exponent for floating-point display
    Use - This exponent determines how the values for this measurement unit are formatted as floating point numbers.
    Examples - If the exponent is 3, the floating point numbers have the format xxx.xxxxE3.
    And deselect commercial meas. unit in application parameters section.
    I would suggest instead of changing standard settings of MON, you create ZMON in TIME dimension.
    Thanks & Regards
    JP

  • Decimal places in formula variable

    Hi all,
    I have a formula variable, for an integer (num of days), ready for input, that by default has 5 decimal places in the selection screen (g.e. 5,00000). It is possible, and if so, where can I change the number of decimal places to show in that variable?
    Please advice

    In my case the formula variable is properly displaying the value without any extra decimal places.
    I have done the following settings.
    Variable Entry - Mandatory
    Ready for Input
    Dimension indicator - Number
    Default value - 95.
    When i execute the report i can see just 95.
    Don't know why it is showing extra decimal places?

  • Increase XL Reporter's Decimal Places to more than 2

    Hi All,
    Can anyone advise on how to increase the default decimal places in XL reporter to be more than 2?
    The figures i retrieved from SAP Financial Template for the stock account is 1234567.81 but XL report shows it as 1234566.76.
    Does showing a differences of 0.05 value.
    I did a sum for the stock account from JDT1 using query. it is also showing me 1234567.81.
    So, I am assuming that XL reporter is using 2 decimal places by default.
    Please help my balance sheet is not balance.
    Regards
    Jessie

    I found that there is a SAP Note written to increase the decimal in SAP XL Reporter.
    See SAP Note 896207.

  • Decimal place in accounting document

    Hi,
    For my client for all the accounting document decimal place is set to 2.
    Can any one tell me where is the configuration for setting this decimal place. I guess this is not in general settings for currency. How this decimal place for accounting documents in a company code is set ?
    Please give some idea.
    Regards
    Roomi

    hi
    GOTO T CODE SU01 and then enter user name and go for change and then goto DEFAULT tab and GOTO decimal notation.....
    ifuseful assign points....
    regards,
    santoshkumar

  • Yielding the desired number of decimal places using the AVG function in t-sql

    Hello again.  Confused retired hobby coder having trouble setting up a scalar-valued function to return the desired number of decimal places from a AVG query.
    Whenever I run the following script I get the number of decimals I desire:
    Using the above I created a scalar-valued function as follows:
    Running this function as: SELECT [dbo].[TestHCIPartial] (1,3)  my return is -7.
    Can you help me with the function causing it to yield the answer to 6 decimal places?
    Thanks and regards, Minuend.

    You've not specified precision and scale in UDF return type. So you're leaving it to server to interpret it based on default settings
    If you want exactly up to four decimal places tweak udf as below
    ALTER FUNCTION..
    RETURNS decimal(20,4)
    AS
    Please Mark This As Answer if it solved your issue
    Please Vote This As Helpful if it helps to solve your issue
    Visakh
    My Wiki User Page
    My MSDN Page
    My Personal Blog
    My Facebook Page

  • Query regarding decimal places for currencies

    Dear all,
    SAP standard allows 2 decimal points as default for any condition value. However, based on the entries in TCURX table we can set number of decimal places with reference to specific currencies.
    In our system there is no entry in TCURX table against USD currency. Still the system is taking 3 decimal places against the expected 2 decimal places.
    Is there somewhere hardcoded this for US or are they any additional settings impacting this? Please help
    Regards,
    Rajesh

    Hi All,
    I have been trying to set 3 decimal places. I got the reference to Note # 38881.
    This is what I did:
    1. Create a new currency US$ and set the decimal places to 3
    2. Maintained the prices using VK11.
    3. Changed the customers' sales area currency to US$
    But when I created the sales order although the system determined the prices in 3 decimals i got the following information message which keeps on showing during the entire sales order creation:
    Pricing error: Mandatory condition ZMAC is missing
    Message no. V1801
    Details are as below:
    The obligatory condition ZMAC does not exist. The document is therefore considered to be incomplete from the point of view of pricing.
    The cause can be, for example, that a condition record does not exist for condition ZMAC or that a field overflow has occurred when the condition rate was calculated.
    Procedure
    Check why the condition could not be found. Use the pricing analysis function on the pricing screen to do this. If necessary, add the missing condition manually to the document.
    I believe I am missing some configuration that should be done in pricing, not sure what. As this question has been flagged answered, hope someone would be able to help me.
    Thanks & Regards,
    Rajesh Singh

  • BOM Component quantity decimal places

    Hi... All..
    how & where to maintain settings for decimal places for component quantity in a BOM..??
    eg.,  Base unit of measure is KG n base quantity is 1KG
            component quantity is o.5KG... at present system is not accepting decimal places.... 
    waiting for reply,
    with rgrds
    L Narayana

    Hi,
    enter the no of decimal places in CUNI .
    then , in CS02 - enter the qty as 0,05 and not as 0.05 (use comma instead of fullstop and it will not throw any error) pls check.
    you can change this using this path also
    in the SAP user menu System->User profile-> Own data in the Default value tab page you can find the decimal notation
    The same topic was discussed earlier in this forum.
    How to maintain BOM quantity in decimal (i.e.0.5 kg) instead of Round valu
    Regards,
    Sheik
    Edited by: sheik abdulla on Apr 14, 2008 2:25 PM

  • Currency Decimal Places setting restore

    Hi Experts ,
    Unfortunately we have changes the setting for currency decimal places in SPRO ==> SAP NETWEAVER ==>GENERAL SETTINGS ==>CURRENCIES ==>SET DECIMAL PLACES FOR CURRENCIES.
    for Currency INR from default 3 decimal places to '4' decimal places, due to this the amounts entered in MM inforecords were changed e.g. the amount which was entered as 15.20 inr changed to 1520.00 inr, After getting reply from Fourm and the senior consultants we have deleted the INR currency from the about setting i.e.from table 'TCURX' after doing this the amounts get corrected i.e. from 1520.00 INR to 15.20 INR.
    But again the same (adverse) change is being seen in amounts for MM Inforecords and SD Condition Records
    If we enter a new record it shows the correct amount.
    How can i correct the previous amounts. It has happen suddenly and what guarantees that this should not happen again.
    Please give me the solution as early as possible. We have to Go-Live in next 2 days..
    Thanks in advance
    Amol

    HI, anand,
    SAP suggest never touch decimal places.
    Regards,
    Satish

Maybe you are looking for