Default control

Using Win 7 Professional
From e-mail I can attach photos/documents
However from photos or documents I cannot e-mail. Apparently need to create default association on control panel.
Can anyone describe specifically action to be followed.
Tx

What program do you use for Email?
IT Specialist and Consultant
Lenovo Tablet Evangelist
Current Machines: IdeaCentre A300, ThinkPad Tablet, IdeaPad U410, and Yoga 3 Pro Touch
Deutsche Community Comunidad en Español
Lenovo - the latest in DOtabs, DOpads, DOcentre's, DOstations and DOservers!

Similar Messages

Disabling default control in pre-existing dialogues

I doubt this is possible, but is there a way to disable the default control in an existing dialogue? There are SDK callbacks available to modify, say, the publish collection settings. Normally this dialogue allows you to change the name of the collection and the Ok/Save button is active.
The SDK hints at changing the default when using an edit_field so Return doesn't just blindly accept the changes instead of inserting a line break in the edit_field. But this is /probably/ for dialogues views you create from scratch, not any of the provided ones you can tweak.

See this post for disabling the default control in Export dialogs:
http://forums.adobe.com/message/2904193#2904193
According to the employee, you can't disable the default control in other dialogs.
See this post for an undocumented method to disable and make invisible the "OK" button in a dialog:
http://forums.adobe.com/message/2928184#2928184
Of course, using an undocumented method entails the risk of not being supported in later versions or of not working as intended.

Changing default control values in LV application?

Can anyone help me?
Is it possible to change default control values in LV program
programmatically?
Sergey Yakovlev, Berlin,
[email protected]

Its quite complex (in my opinion) to do so programically , but using a set of invoke nodes, you can get it done ('Make this value default'). Look at the attached for info (its a large link name, so you may have to copy and paste in your browser).
http://zone.ni.com/devzone/devzoneweb.nsf/opendoc?openagent&2C14132F826F839F8625683A000B0B99&cat=DB5863CD70417B07862567930070A058
I've been simply using config.txt files of read and write to set values.

Default controlling area is wrong in KSCF and KOCF t-code

Hello Experts,
We need to carry forward commitments on internal orders and cost centres into the next financial year
The transactions we use are KOCF and KSCF,
The default Controlling Area is appearing as 0001, but it should be 1000. The system is not allowing them to change it to 1000
Please can any body advice how it will be changed
Thanks Regards

Set your controlling area in OKKS before running KSCF

[svn:osmf:] 13121: Moving the setup for the default control bar into a DefaultControlBar class .

Revision: 13121
Revision: 13121
Author:   [email protected]
Date:     2009-12-21 11:53:07 -0800 (Mon, 21 Dec 2009)
Log Message:
Moving the setup for the default control bar into a DefaultControlBar class. Adding constants for the widget names, and updating WebPlayer accordingly.
Modified Paths:
    osmf/trunk/apps/samples/framework/WebPlayer/src/WebPlayer.as
    osmf/trunk/libs/ChromeLibrary/.flexLibProperties
    osmf/trunk/libs/ChromeLibrary/src/org/osmf/chrome/controlbar/ControlBar.as
Added Paths:
    osmf/trunk/libs/ChromeLibrary/src/org/osmf/chrome/controlbar/DefaultControlBar.as

Revision: 13121
Revision: 13121
Author:   [email protected]
Date:     2009-12-21 11:53:07 -0800 (Mon, 21 Dec 2009)
Log Message:
Moving the setup for the default control bar into a DefaultControlBar class. Adding constants for the widget names, and updating WebPlayer accordingly.
Modified Paths:
    osmf/trunk/apps/samples/framework/WebPlayer/src/WebPlayer.as
    osmf/trunk/libs/ChromeLibrary/.flexLibProperties
    osmf/trunk/libs/ChromeLibrary/src/org/osmf/chrome/controlbar/ControlBar.as
Added Paths:
    osmf/trunk/libs/ChromeLibrary/src/org/osmf/chrome/controlbar/DefaultControlBar.as

Any default control for up-and-down dropbox?

Hi,all:
Can anyone tell me if I can use any default control for both up-and-down direction drop down box?
Thanks,

You might also consider a simple choicebox too if you don't need all the functionality of the SpinnerX.
import javafx.application.Application;
import javafx.collections.FXCollections;
import javafx.scene.*;
import javafx.scene.control.ChoiceBox;
import javafx.scene.effect.ColorAdjust;
import javafx.scene.image.*;
import javafx.scene.layout.*;
import javafx.stage.Stage;
public class DropBoxExample extends Application {
public static void main(String[] args) { launch(args); }
@Override public void start(final Stage primaryStage) {
    // create some choices.
    ChoiceBox choices = new ChoiceBox(FXCollections.observableArrayList(
      "64 kbps", "128 kbps", "256 kbps", "512 kbps", "1024 kbps"
    choices.getSelectionModel().select("128 kbps");
    // layout the scene.
    StackPane layout = new StackPane();
    layout.setStyle("-fx-background-color: cornsilk; -fx-padding: 10;");
    layout.getChildren().addAll(choices);
    primaryStage.setScene(new Scene(layout, 250, 100));
    primaryStage.show();
    // style the choice arrow.
    Node arrow = choices.lookup(".arrow");
    if (arrow != null && arrow instanceof Pane) {
      arrow.setStyle("-fx-shape: \"\"; -fx-background-color: transparent;");
      ImageView doubleArrow = new ImageView(new Image("http://aux4.iconpedia.net/uploads/923633044528065785.png"));
      ColorAdjust monochrome = new ColorAdjust();
      monochrome.setSaturation(-1); monochrome.setContrast(-0.3); monochrome.setBrightness(-0.3);
      doubleArrow.setEffect(monochrome);
      doubleArrow.setFitHeight(16); doubleArrow.setPreserveRatio(true);
      ((Pane) arrow).getChildren().add(doubleArrow);
}The code above replaces the default drop down arrow in the choicebox with an image of a double edge arrow pointing up and down, but, if needed, you can style the choicebox how you want using css (and the arrow via an svg shape if preferred - as is done in capian.css extractable from jfxrt.jar in the JavaFX runtime lib folder).

[Bug] Default control style ignored in classes

Taking time out from LVOOP before I break something I may regret to report a bit of a nuisance. What is cheesing me off today is that my default control style (system) is being brazenly ignored by LV inside VIs which are owned by a class. All controls/indicators created are modern. argh. Could be worse, it could be making everything silver.
1. set default style to system or silver or classic
2. in a vi outside of a class, drop a constant on the BD and create indicator -> should match the style set in 1
3. in a vi inside of a class drop a constant on the BD and create indicator -> modern style
Also, the scripting VIs for methods and accessors ignore the preferences for default label position. At least that one I can fix myself.

Hi Darin,
Thank you for your feedback. I tried creating indicators inside of a VI in a class and it observed my default control style in LabVIEW 2013. Which version of LabVIEW are you running?
Regards,
Matthew B.
Applications Engineer
National Instruments

11R2 How to change IP in OWB_REPOSITORY_LOCATION and Default Control Center

We are changing the IP of the OWB repository database server. Reviewing the locations tab, I found out the Default Control Center and OWB_REPOSITORY_LOCATION are set up with IPs, so I need to change the IPs by hostname in both of them. I think I cannot use the script OWB_HOME/rtp/sql/UpdateLocation.sql, then, how to do it?
I would appreciate if someone points at other issues I should check from OWB point of view.
Thanks in advance
Carmen

Thanks for your answers.
Oleg, I have update the CONNECT_SPEC in table WB_RT_SERVICE_NODES with hostname(:port:service), then I stopped / started the Control Center. Locations of OWB_REPOSITORY_LOCATION and Default Control Center still show the IPs in designer. (The other target locations were configured with hostname)
Then I run the script UpdateLocation.sql for OWB_REPOSITORY_LOCATION, and it finished fine:
09:06:01 SQL> @$ORACLE_HOME/owb/rtp/sql/UpdateLocation
This sql script sets the host:port:service and version parameters for a
location in the OWB Client Repository. It must be run from user OWBSYS.
The connection type must be host:port:service and cannot be changed
using this script.
The location may be registered or unregistered.
Restart OWB client in order to see the new version in the UI.
Enter Workspace Name: MY_WS
Enter Workspace User Name: WSUSER
Enter Location Name: OWB_REPOSITORY_LOCATION
New Host: myhost
New Port: myport
New Service Name: myDB
New Version: 11.2
Select Workspace Id for workspace MY_WS and user WSUSER
Workspace id = 122
Update location properties for OWB_REPOSITORY_LOCATION
Location Type = Oracle Database
Location OWB_REPOSITORY_LOCATION Found
Connection Type = Default HOST:PORT:SERVICE Updating...
Updating CMPLocation_Host = myhost
Updating CMPLocation_Port = myport
Updating CMPLocation_ServiceName = myDB
Updating CMPLocation_Version = 11.2
InsertingCMPLocation_Version
Procedimiento PL/SQL terminado correctamente.
09:12:04 SQL>
Both locations still have IPs in designer. Migth I have tried with GLOBAL_WORKSPACE instead of MY_WS?
Regards
Carmen

Problem in InternalFrame default control icons when minimize, restore

Behaviour of Internal frame control icons are stange and inconsistent.
When I minimized, maximized or restore the icon are changes for minimize, maximize and restore state.
Is it a bug in this class or is there any way to control it.
If not how can I make the internal frame with the default icons control

Try restart your iphone. Try restore again . Good luck , sorry my bad English

Replace Control & Simulation plots (Bode/Step/Root Locus) default control with Silver Controls

I just installed the 2013 trial version of LabVIEW and LabVIEW Control Design and Simulation Module. Normally, for control design I only use Matlab/Simulink but LabVIEW does have some advantages and I want to take these advantages. The problem I feel it is annoying is that I cannot use the Silver Controls to replace the default classis style control - like the bode gain and phase margin or root lotus plot below
Solved!
Go to Solution.

Hi muahang,
why not? What's the problem here?
Those plots look like standard XY graphs (maybe with some fancy background graphics for the root locus)...
Best regards,
GerdW
CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
Kudos are welcome

Default control-key for order operation.

Hi gurus,
My requirement is: in the order operation tab I want control key to be defaulted (say PM09) and user would be not allowed to change it.
For this I have created PM09 as control key in Work Center default values tab, but my second requirement to disallow user to change it is not working!
Is there is any specific setting, pls tell me how to do it.
Regards,

PM gurus,
Please find my requirement and input your possible solutions!
Requirement: My Client is having some contract workers for some jobs like cleaning and fixing small issues and are paid via service entry sheet. Now how we can map these workers?
For this I made one workcenter (say 100MC) and in default values tab I assigned Control Key (say PM09, with settings confirmation possible but not necessary and indicators, Scheduling, Det. Cap. Req. & Print checked).
As this control key is marked default in WC it will be copied in order operation but problem is it can be changed irrespective of workcenter.
I want it to be defaulted and to be unchanged. If control is to be changed user has to change workcenter.
I am open for any solution via authorization objects or via user exit.
Thanks in anticipation,

Changing The Default Control Appearance For Good?

I am always using numeric controls that are right justified and lack the up/down arrows. Is there a way, aside from creating a type def and (which is another file to manage), to change the default creation appearance of controls and indicators?

Hello Norbert,
Here's a better explanation of what I'm looking for, put together without any get-out-of-the-office-before-5-oclock rush wording.
The Modern/Numeric control defaults to showing the INC/DEC arrows and is left justified. I don't want the arrows, and I want the control right justified. After I place a Modern/Numeric, I have to tweak it to remove the INC/DEC arrows. After I place and tweak one, I can do a copy/paste or a control-drag to duplicate the control, but I find that I always have to tweak the first one. Plus, any time I use a block diagram "Create Control" shortcut, it places a Modern/Numeric that is left justified and has the arrows.
What I'd like to do is change LabVIEW's default settings so that when I place a Modern/Numeric, it does not show the arrows and is already right-justified.
I know I can create a custom control/typedef, but the problem with that approach is that now you have another file to distribute. Also, it wouldn't override LV's "Create Control" on normal numeric wires.
Is there a way to fiddle with LV's defaults, or am I out of luck?
Thanks!
Attachments:
Default Numeric.JPG ‏4 KB

How to change Switch between open documents keyboard shortcut (default Control + Tab or Cmd + ~)

I use Control + Tab and Control + Shift + Tab or Cmd + ~ and Cmd + Shift + ~ to switch between tab back and forth alot how do I change the shortcut to something else?
On Photoshop CC 2014 mac

No, there isn't. you can't even set your own shor cut keys as you don't know what the documents will be named. Normally you can add short cuts keys but only for those menus options that already exist but your documents will change. I have searched for the answer earlier as I also want it.
There is in the Pages Help menu an option for Keyboard shorcuts but nothing is mentioned ther about changing document windows.

Application builder default control value

I have a VI the reads a data file. When I build an application and transfer the application to another computer the default directory is no longer valid. Is there anyway to allow the user to establish a default directory for the file read on his computer or does he always have to go through multiple levels to find the file every time he restarts the application?

There is an initialization file (projectname.ini) that is created with your application (build for the application). You can define your default locations there. Note, you will need to configure the builder to use your file.

Datasocket: error creating default control

Hey, we are using datasocket connection to retrieve data from an extern datasocket server. Each 10 second a connection is created to the server. After about 10 minutes an error occured.
>>ComponentWorks<
Can you help me please???

Hi AnTri,
I need more information for localizing the problem.
Please give me more infos about
OS version (service packs etc...)
MStudio version
Visual Studio /C++ version
etc.....
and perhaps, attach a small example code to the forum for reproducing the problem.
Best regards
Stefan K.
NI Germany
(SRQ 195607)

Default control

Similar Messages

Maybe you are looking for