Default subinventory for released planned orders

Is there a place where we can assign a default receiving subinventory for the released or auto-released MRP Planned orders?
We need the PO created from these released planned orders to have a specific receiving subinventory. It may be defined by item or better by user or responsibility.
Thanks a lot.
Luis

Hi Luis,
Please check the Setup Item Transaction Defaults in Inventory (Navigation:Inventory>Setup>Transactions>Item Transaction Defaults).
Its functionality is Sub inventory and Locator defaults are specific to "ITEMS".
Use this form to define a default sub inventory and/or locator for any item for shipping, receiving, and move order transactions. Oracle Shipping Execution displays the default shipping information when you ship an item. Oracle Inventory displays the default receiving information when you receive an item. For move orders, Oracle Inventory derives the default put away locator when you transact an item into a locator controlled sub inventory if no locator was specified by the creator of the move order.
Regards
Jagadish

Similar Messages

  • Can I releases planned orders in planner workbench  using inventory planner responsability (IO)

    Can I releases planned orders in planner workbench using inventory planner responsability (IO), in IO manual I found following information :
    Planner Workbench
    You can use the Planner Workbench in Oracle Advanced Supply Chain Planning to act on recommendations generated by the planning process for a plan. You can implement
    planned orders as discrete jobs or purchase requisitions, maintain planned orders, reschedule scheduled receipts, and implement repetitive schedules. You can choose all
    suggestions from an MRP plan, or only those that meet a certain criteria. In Oracle Inventory Optimization, Planner Workbench is used to perform tasks such as setting up
    item attributes, setting up supply chain BOM, and analyzing time-phased safety stocks.
    my question is Oracle Inventory Optimization, Planner Workbench can´t release planned orders.
    Thanks in advance
    regards James

    Hi James,
    We cannot release planned orders from IO workbench.
    IO is for safety stock planning, not for releasing planned orders. That is done from an ASCP plan which uses the IO plan as demand schedule.
    Regards,
    Mohan Balaji
    NOTE: Please mark the post as Helpful or Answered if the update has really helped you. This would also bring the thread to logical conclusion and will be helpful for the viewers.

  • Unable to release planned order for single line from MRP workbench

    Hi
    We are unable to release planned order for single line from MRP Planner workbench,but Select All For Release is working for all the lines for the item
    User want to release a specific line but no new requisition is generated
    It is highly appreciable if anyone could help to resolve this issue
    Appreciate the Help
    Regards
    VKPK

    It sounds like the release goes through in the workbench but the requisition does not show up in source - is this correct? If so I would check item attributes / flags for purchasing and buy. also have found some items require a purchase price to be populated in master and org

  • Report for released purchase order

    Hai guru's
    this is second time but i did't get any good replay please consider this, i want any standard report for released purchase order,means(i released two backdated po today next day i verify the report ME2n,those po are not display, the system take only document date not released date, now i am using CDHDR through this i got the report. but it is big process, so once check this and send your valuable solution.
    Prasad

    Hi Krishna,
    You could use Me2N with the dynamic selection coupled with normal selection screen.
    In Dynamic selection(3rd icon in screen).....you can select for which company code, release indicator as released....and save it as default variant.
    hope this should solve your query
    Sk.

  • Is there a link between ASCP released planned order and purchase requisition?

    Hi,
    i'm new to EBS. would like to know is there some kind of link on table level between a released planned order with purchase requisition?
    thanks

    Hi,
    As explained by Abhishek, we do not maintain any link between the PLANNED ORDER from which a requisition is created and the actual requisition.
    The simple reason being... in general, businesses run the plans on a daily basis and each time the plan is run, the previous data is overwritten... so there is no point in retaining the information of the planned order from which you are creating the requisition.
    Hope that helps.
    Regards,
    Mohan Balaji
    NOTE: Please mark the post as Helpful or Answered if the update has really helped you. This would also bring the thread to logical conclusion and will be helpful for the viewers.

  • MRP setting for Purchase (Planned Order ) Requirement date

    Dear Sir,
    During the MRP run , we desire that the genertaed Planned Orders for the Purchase related items , should have requirement date as either the current date or the current date plus procurement lead time defined in the Material Master against the item .
    To achive the abobe requirement , we request you to pl guide us as what setting / parameters are required to be set in the MRP setup .  Or if there is some other alternate approach , pl suggest the same .
    With Thanks and Rgds
    Sonia Agarwal

    Dear
    Generally , during MRP run , system will genarted Planned order for Purcahsed item if it is opening period .
    The opening period for the planned order represents the number of workdays that are subtracted from the order start date in order to determine the order opening date. This period serves as a time float, which is available for the MRP controller when converting a planned order into a purchase requisition.
    You define the opening period for the planned order in Customizing for MRP in the IMG activity Define floats (scheduling margin key) and assign it to the material in the Scheduling margin key field (MRP 2 view) in the material master
    Now if you want to have Planned order for purchased item with requirement date as current date , then maintain Demand date like Sales Order requirement date as curent date in VA01 or PIR date as current date.
    Where as MRP will consider the Planned Order based on planned opening date , lead time , GR processing time from MRP2 view .So for current date requirement , u should keep Lead time and GR processing time as 0.
    Regards
    JH

  • GR quantity for the planned order(MD13)??

    Hi All,
             I have a list of planned orders(MD13) with planned quantities(PLAF table).
    Now I need a Goods receipt quantity for these planned orders, because I need to show
    the comparison between planned quantity and goods receipt quantity in the for the last month.
    I can get material documents by passing material,plant,movement type and date range to MSEG,there I can find the GR quantity. But how can I know that this GR quantity is for that particular planned order ??
    Say for example, I have planned 100units for the material m1 for the month of july.
    But actual GR quantity for this material is only 80units. 100-80 = 20 units is my comparison..
    From where can I get this 80units, hope u understand my question.
    Anyone please help me.
    Helpful answers will be rewarded
    Thanks & Regards,
    V.Raghavendra.

    Hello Raghavendra,
    there are no goods receipts for planned orders. These are converted either into production orders or purchase requisitions and then purchase orders. For production and purchase orders there are goods receipts.
    For production orders you should find the link in MSEG-AUFNR (if you really do have any scenario with GR for planned orders, this should be the same field).
    Easier, if production orders are applicable, should be to look in AFPO-WEMNG (Quantity of goods received for the order item) and compare it to AFPO-PSMNG or AFPO-PGMNG.
    You can also check in AFPO-PLNUM whether this production order is linked to your planned order.
    Regards,
    Kay

  • BAPI for converting planned order to Production Order(in PP)?

    Hi all,
            Is there any standard BAPI for converting Planned order to Production Order?
    Thanks in advance,
    anjaly

    hi,
    check this..
    BAPI_PRODORD_CREATE_FROM_PLORD BAPI: Convert Planned Order into Production Order
    for more details check this link..
    Create a production order
    <b>reward points if it is helpful..</b>

  • Capacity Reservation Table for a planned order

    Dear experts,
    When I look at MD13, I can see the capacity requirement for a planned order.  I can also see the requirements build up in my CM01 screen.  We would like to pull the data into our BW system, but we are having issues finding where the capacity reservation information resides.  When I look at table KBEZ, I can only find values that correspond to production orders.  Is there a similar table for planned orders?  Does SAP save the detailed scheduling infromation for planned orders in a table somewhere, or is this calculated at the time MD13 or CM01 is run?
    Thanks,
    Matthew Bruckner

    Have you tried with KBED? I can see with SE16 that you have a field for selection with the planned order number....

  • The Prerequisites for releasing process order

    Hi all,
    What are the Prerequisites for releasing process order?
    Can we issue the material against process order, if it is on CRTD status?

    Hi,
    Prerequiste for REL of Process Order -
    Process order should have CRTD status.
    Other with IMG setting, you can have order status directly REL once it is created also. See Prod Sch Profile setting.
    You cannot do goods posting (GI and GR) unless order is REL status. Not possible with CRTD status.
    Srini

  • Default PR type for MRP (planned order -- PR)

    Hi Expert,
    Is there any posibility to set default PR type for planned order - PR conversion from MRP?
    in SAP standard, PR type is NB, we have configured specific PR type, let say PRM. The purpose is we do not need to change NB to PRM while converting the planned order into PR.
    Pls help.Thanks
    Rgds,

    Hi Gurus,
    This is my first post in this forum. Have been trying to search this forum for my case all day and found some answers but when i implemented it in my SAP , the answers didn't work.
    The case is:
    When i try to convert Planned Order to PR through tcode MD15/MD16, the system will propose PR Document Type NB as default. In my company we don't use that NB PR type. We have another 10 customized PR Type and one of them is for Replenishment. I'd like to set this ZR09(Replenishment) PR Type as default and it's not possible to choose another PR Type.
    I have read several answers and implemented them, for example:
    1. OPPR with MRP Group 000, and I found no indicator except Scheduling/Doc Type. I typed ZR09 in field Doc Type SPO but in MD15/MD16 other PR Types still appear with NB as default.
    2.  SPRO-MM- Consumption based planning u2013Procurement Proposal u2013 Define Order Profile or SPRO-PRoduction - MRP- Procurement Proposal - Planned Order - Define order Profile, when creating new entries with Object Type Planned Order/PR still canu2019t find my customize PR Type in field Order Type. Field Order Type only consist of 2 digits order type such as NB,LA,RS,KD,KB,PE,PR,VP. No place to choose PR Type ZR09 or other customized PR Type.
    Can anyone help my case?
    Thanks and regards,
    IC BUMA

  • Auto-release Planned Orders is not creating WIP job after zero on-hand (i.e. Level Below  safety stock)

    Hi
    The time release fence in defined at item level as 1 day also safety stock level is defined in inventory safety stock form.
    Once MRP launch it should create the discrete job against item as zero onhand for that item but MRP workbench is showing planned order for the item instead of creating item.

    Hi
    The time release fence in defined at item level as 1 day also safety stock level is defined in inventory safety stock form.
    Once MRP launch it should create the discrete job against item as zero onhand for that item but MRP workbench is showing planned order for the item instead of creating item.

  • OSSNOTES for releasing process orders with missing parts in background

    Hi All,
    The bapi 'BAPI_PROCORD_RELEASE' is not releasing the process orders
    with missing parts in background.
    Is there any OSSNotes for releasing these process orders in backgound through this bapi.
    Pls help.
    Thanks .

    Hi Suri - Thanks for your response. I tried both with blank(individual and collective) and 2 (collective req. only) but I still get the same result. I found one other setting that can solve this issue and that is checking the activate full confirmation logic at the the MRP group level in OPPR. I will test more and let you know if that works but we dont use MRP groups here at our client and that is why I was little hesistant to set up collective availability check parameters at the MRP group level. But looks like this is the only option that we can use to get this resolved.
    Thanks,
    Bharath

  • Credit Block for released sales order

    Dear All,
    I have got one issue. There is a sales order which was created earlier say 15 days back. It went into the credit block at the time of saving it. It was released through VKM3 too.
    Now when i change any field in the sales order today, it is going into the credit block. We are not changing any value of any of the item. Just maintaining the Billing block in it or remobving the Billing block.
    The number of days maintained in the OVA8 are 182. So as per the standard functionality it should not go into the credit block for any change in the sales order like changing the billling date or changing the billing block.
    Can you please let me know what might be the reason for this sales order to go into the credit block..??? Any help is very much appreciated.
    Thanks and regards,
    Vishi.

    Dear Vishi
    Please check if you have checked the critical fields option.
    Credit check against critical fields (fixed value dates)
    The indicator controls the critical field check. If the field is selected, the system checks whether critical fields have been changed.
    Use
    If a check is carried out, the following fields are relevant:
    Payment terms
    Additional value days
    Fixed value date
    Note
    Use this type of check for sales documents only.

  • Repeat credit checking for released sales orders

    Hi,
    We are implementing FSCM Credit management in our project. In our system, when the sales order is created, the credit check will happen and the failed orders will go to VKM1. Till the order is released, any change to that order will trigger the credit checking process.
    But once the credit block is released in VKM1, Credit checking is triggering only for
    Quantity change
    Adding new line items
    Credit checking is not triggering for any other changes to the SO like deleting the line item changing the payment terms etc..
    I would like to know if there is any control in FSCM Credit management to repeat the credit checking process for the released sales orders.
    Appreciate any help in this regard.
    Thanks
    Prabhakar

    Hi Prabhakar,
    Navigate to Financial Supply Chain Management--> Credit Management--> Integration with sales and distribution-->define automatic credit control.
    Over there you need to check critical fields check box for this to happen. Hope this helps

Maybe you are looking for