Can I releases planned orders in planner workbench using inventory planner responsability (IO)

Can I releases planned orders in planner workbench using inventory planner responsability (IO), in IO manual I found following information :
Planner Workbench
You can use the Planner Workbench in Oracle Advanced Supply Chain Planning to act on recommendations generated by the planning process for a plan. You can implement
planned orders as discrete jobs or purchase requisitions, maintain planned orders, reschedule scheduled receipts, and implement repetitive schedules. You can choose all
suggestions from an MRP plan, or only those that meet a certain criteria. In Oracle Inventory Optimization, Planner Workbench is used to perform tasks such as setting up
item attributes, setting up supply chain BOM, and analyzing time-phased safety stocks.
my question is Oracle Inventory Optimization, Planner Workbench can´t release planned orders.
Thanks in advance
regards James

Hi James,
We cannot release planned orders from IO workbench.
IO is for safety stock planning, not for releasing planned orders. That is done from an ASCP plan which uses the IO plan as demand schedule.
Regards,
Mohan Balaji
NOTE: Please mark the post as Helpful or Answered if the update has really helped you. This would also bring the thread to logical conclusion and will be helpful for the viewers.

Similar Messages

Unable to release planned order for single line from MRP workbench

Hi
We are unable to release planned order for single line from MRP Planner workbench,but Select All For Release is working for all the lines for the item
User want to release a specific line but no new requisition is generated
It is highly appreciable if anyone could help to resolve this issue
Appreciate the Help
Regards
VKPK

It sounds like the release goes through in the workbench but the requisition does not show up in source - is this correct? If so I would check item attributes / flags for purchasing and buy. also have found some items require a purchase price to be populated in master and org

Default subinventory for released planned orders

Is there a place where we can assign a default receiving subinventory for the released or auto-released MRP Planned orders?
We need the PO created from these released planned orders to have a specific receiving subinventory. It may be defined by item or better by user or responsibility.
Thanks a lot.
Luis

Hi Luis,
Please check the Setup Item Transaction Defaults in Inventory (Navigation:Inventory>Setup>Transactions>Item Transaction Defaults).
Its functionality is Sub inventory and Locator defaults are specific to "ITEMS".
Use this form to define a default sub inventory and/or locator for any item for shipping, receiving, and move order transactions. Oracle Shipping Execution displays the default shipping information when you ship an item. Oracle Inventory displays the default receiving information when you receive an item. For move orders, Oracle Inventory derives the default put away locator when you transact an item into a locator controlled sub inventory if no locator was specified by the creator of the move order.
Regards
Jagadish

Is there a link between ASCP released planned order and purchase requisition?

Hi,
i'm new to EBS. would like to know is there some kind of link on table level between a released planned order with purchase requisition?
thanks

Hi,
As explained by Abhishek, we do not maintain any link between the PLANNED ORDER from which a requisition is created and the actual requisition.
The simple reason being... in general, businesses run the plans on a daily basis and each time the plan is run, the previous data is overwritten... so there is no point in retaining the information of the planned order from which you are creating the requisition.
Hope that helps.
Regards,
Mohan Balaji
NOTE: Please mark the post as Helpful or Answered if the update has really helped you. This would also bring the thread to logical conclusion and will be helpful for the viewers.

Auto-release Planned Orders is not creating WIP job after zero on-hand (i.e. Level Below safety stock)

Hi
The time release fence in defined at item level as 1 day also safety stock level is defined in inventory safety stock form.
Once MRP launch it should create the discrete job against item as zero onhand for that item but MRP workbench is showing planned order for the item instead of creating item.

Hi
The time release fence in defined at item level as 1 day also safety stock level is defined in inventory safety stock form.
Once MRP launch it should create the discrete job against item as zero onhand for that item but MRP workbench is showing planned order for the item instead of creating item.

MRP Run can not create Planned order to Sales order

Hi,
I have a problem with planning run to sales order. We have a configurable material which have make to order strategy. MRP Run does not create planned order to some of our sales order. I think it has relation with schedule lines but i can not understand the problem.
If schedule line has 1 as confirmed quantity MRP run can not plan but 0 as confirmed quantity MRP Run creates planned order. How can i solve this problem?
Regards,
techmastere

Hi,
Order for which qty is confirming, check which schedule line is determined and which requirement type system is determining.
then in VOV6 for schedule line tick mark availability check & Transfer of requirement
for requirement class OVZG tick mark availability check & Transfer of requirement
Note: if schedule line is not relevent for availability check & ToR then system always defaul confirm quantity.
kapil

Can't dispatch planned order (LA), but can dispatch production order

Hello,
   I'm new to capacity planning and all of the related configuration screens. I'm probably missing something simple. We've configured our work centers and routings. We've configured our production order types (tcode OPU3, type US01) and planned order types (tcode OPU5, type LA) so that all create capacity requirements and are relevant to 'detailed scheduling'. Requirements are being generated for production orders and planned orders. We can see correct setup and production times in the graphical planning table CM21.
   Here's the problem: When we try to dispatch a planned order, nothing happens. There is no error, but the order is not dispatched. If we convert the planned order into a production order, accepting all SAP proposed defaults, and then try to dispatch the production order, it works fine.
   What configuration are we missing? My first thought was to look in OPU5 for order type LA. In the detailed scheduling section, scheduling horizon is zero (is this Ok?), SelID: Detailed is 01, 'scheduled' and 'generate capacity reqs' are checked.
Thanks,
Randy

Randy ,
Please analyse the below note related to your issue.Hope this will help you to sort out the problem.I have cheked the configuration area.I hope u are correct .In fact , it may related to your production version if you do automatic dipatch.Please reade the note and come back.
If an error arises when automatically dispatching planned orders (for example, a capacity overload at a work center) then the system schedules the affected planned orders to another production line.This function is available in both types of planning table. It is of interest for all areas that use planned orders, for example in repetitive manufacturing or in MRP/MPS. It can also be used in production control when later converting planned orders to production orders.
this function the following conditions must be met:
The dispatching function Change production version on error must be set in the strategy profile.
The original work center
must be entered in the production version of the material as the production line (not necessarily in the current production version).
can only be assigned to one operation in the routing for this production version
The alternative work center can only be assigned to one operation in the routing for the alternative production version
If an error arises the system copies the production version with the version key that is next alphanumerically into the planned order. The planned order is rescheduled with this production version. However, it is not dispatched to the new production line but remains in the pool. In this way you can dispatch the rescheduled planned orders together with other planned orders in the pool to the new production line.
To give you a better overview and to improve handling you should choose a sort key with which the planned orders in the pool are sorted according to work center and, for example, latest start date. All orders that are to be dispatched to a production line are then placed next to one another in the pool. If an error arises during automatic dispatching to the new line every planned order affected is rescheduled with the next production version
. If the conditions are not met then the following occurs depending on your settings in the strategy profile:
Dispatching is terminated
Dispatching to the same work center is continued and error messages are written to the planning log
You can only dispatch main operations with this function, but not sub-operations. Operations are always dispatched with the full quantity to the new work center
Reward point if useful
Regards
Jia

I can't see planned order in Long Term Planning Stock/requirements list.

Hi
I am trying to use Long Term Planning in SAP.
I created scenario dates from 01.03.2011 to 03.09.2011. Between those dates i entered planned independent requirements as 300.
When i went to Long Term Planning Stock/requirements list, i can see all planned independent requirements but i run Multilevel single-item planning and then when i went to Long Term Planning Stock/requirements list again, i couldnt see planned order for planned independent requirements.
So what is the problem? Can anyone help me please?
Thank you.

HI
check the planning scenario in MS31 and the PIR assignment in MS31 also check the plant assignement.
Check In MD61 you have enter PIRs in simulation version and the same version is to assigned in planning scenario
Also check T code OPU5 for LTP setting for planned orders
Regards
Anupam Sharma
Edited by: anupam sharma on Sep 3, 2010 2:33 PM

How can I cancel an order, that was created using Guest Checkout? Or how can I associate in with my account?

Wanted to buy ipod nano, but got a problems with payment information. And now can't cancel an order.

Where did you try and order it? From Apple's website? Perhaps this page can help.
Viewing & Changing Orders
B-rock

I want to know if I can buy Photography Plan (12.39€/mo) and use it for commercial use.

I want to know if I can buy Photography Plan (12.39€/mo) for a small business and use it for commercial use. Am I restricted when it's come about personal use or commercial use if I will buy this plan? Please help me asap!

iuliao54948604 wrote:
I want to know if I can buy Photography Plan (12.39€/mo) for a small business and use it for commercial use. Am I restricted when it's come about personal use or commercial use if I will buy this plan? Please help me asap!
You obviously think it such a good deal, it must be too good to be true.

Release Planned Orders from SNP to R/3

Hello Experts:
I have a business request to release the Production Planned KF from SNP into a frozen MPS (or even an inactive fcst version) in R/3. Since we have only released a forecast from the DP side to R/3 in the past, can anyone tell me the best practice to release from SNP to R/3? Do I need to create an info cube to perform the release?
The business runs a Heuristic in SNP at the finished good level and the makes modifications and would like to release this to be used in the R/3 MRP run for some groups of materials, as opposed to releasing the forecast for MRP to run on.
Currently, I can send the data from SNP Production Planned KF to a time series KF in DP and release to MD63 from there, but they would like to release directly from SNP in the future.
Any suggestions are greatly appreciated!
Andrea

Hi Andrea,
If you want to release SNP planning data to ECC, you need to make following settings.
In customizing
Maintain Distribution definitions
Maintain Settings in Configure transfer to OLTP system in SNP customizing-Global Settings.
If you maintain periodic setting in SNP setting, you need to run transaction /SAPAPO/C5 to transfer data.
As well as u can do this also :
1) You need to create a release profile using transaction /sapapo/mc8s
2) In release profile, you need to maintain planning area, key figure to
be transformed, plg version, category, etc.,
3) Once it is created, using transaction /sapapo/mc8t, maintain the
R/3 transfer steps
4) Then create a planning job in background using transaction
/sapapo/mc8d

How can i search several orders at a time using purchase order numbers?

Hi,
I need to search several sales orders by using purchase order numbers at a time instead of
searching for single order at a time.
And i need to send several order confirmations to the customers at a time, how can i do this?.
Help me regarding this.
Thanks
Raghu

Hi,
Go to VA05N
On initial screen speciefy PO number and execute then you will get report list
To send this
Menu LIST >> SEND TO >> Mail reciepient
Enter the reciepient & reciepient type and send (see list in attachment tab)
Kapil

How can I change the order of menu items using Term Store Navigation?

A cool new feature in SharePoint 2013 is term store navigation. However SharePoint seems to be ordering my terms (menu tabs) alphabetically. This is not a desired action.
I tried to enter the terms in the order I wanted them to appear (IE - Home, About, Contact etc. ) but my menus are still sorted by alpha (About, Contact, Home). I have tried to change the order using the interface but it doesn't seem to work.
Any suggestions on how to obtain the desired effect? If there is no workaround this feature is practically useless.
The Web Guy

Never mind, I just found the custom sort tab hidden away!
The Web Guy

Can MRP only create planned orders for ROH, not for FERT?

HI all,
Is there any way to only generate planned orders for raw materials after MRP, forbid creating planned orders for FERT?
We want create planned orders for FERTs manually.
Thanks,
Harvey

Harvey,
Yes, that was also my understanding of your scenario. Did you try X0 for Fert? Run MRP against the entire plant, and MRP will not create any new planned orders for the X0 parts. It will explode the BOM and create dependent requirements in the components. In addition, you can create FERT planned orders manually, or using an external planning system, and these manually created orders will also create dependent demand on your components.
If you are also using Sales orders to consume your PIR, you will also have to look at requirements determination for Sales orders. This is configured based on MRP type. If you change existing MRP types, you may have to add SD config so as to continue to pass requirements to MRP. Your SD resource should be able to help you through this, or I can give you basic instructions if you decide that the PIR/demand/planned order/dependent requirements works to your satisfaction.
Rgds,
DB49

Material shortage for Planned Order (Discrete Job) in PWB

Client has planned orders on planner workbench (PWB) ready to release as Discrete Jobs but, because they have frequent revisions, they waits till all components (required to build job) are onhand before releasing from PWB.
They would like an easy way to either check or be notified when the last component required for job is received into inventory so they can release from PWB. They cannot use the standard "Discrete Job Shortage Report" as the job is not created yet. And they don't want to release from PWB till ALL material is onhand
Could we create a custom report perhaps (using same logic as "WIP Mass Load" to determine all component required versus onhand), but does anyone have a better solution how we can solve this?
Regards,
Hugh
Edited by: user13050057 on 13-May-2010 02:09
Edited by: Hugh Parker on 13-May-2010 08:13

1) Why would you check for components of subassemblies? e.g. Say your BOM looks like this.
FG1 is made up of SA1 and SA2 and COMP1.
SA1 is made up of COMP2 and COMP3.
Say you are releasing planned order for FG1. As long as the planned order is pegged to onhand for SA1, SA2 and COMP1, you are good. Right?
2) If you have to add custom logic, I would do it using a when-validate-record personalization on the PWB. The personalization will call a function that accepts order number ; does all pegging checks and returns true or false. If it returns false, then the personalization returns error and does not allow release of the planned order. The function will have to be an interative program that traverses the pegging loop to ensure that all lowest level demands are pegged to onhand.
Hope this helps
Sandeep Gandhi

Can I releases planned orders in planner workbench using inventory planner responsability (IO)

Similar Messages

Maybe you are looking for