Delete shoppingcarts with status approved or change status

Since the backend system was updated with the latest support packages a lot of SC didn't pass anymore and got stuck in the system.
sers have reorderd most of them but now the old sc remain. as soon as I pass the fix which caused the problems the old sc's will be passed since the sollution will also apply to these sc's .So I was looking for a way to change the status or delete the items.
I found
how to delete a approved shopping cart
Delete shopping cart
In the monitor I can't get to the shoppingcarts anymore since they are approved. So I was curious how I can delete the line items if I can't access the sc anymore. ??
we work with SRM 5.5
kind regards
arthur

I try to block the shoppingcarts with the function
BBP_PD_SC_STATUS_CHANGE
but every status I try it gives the error that the status is not allowed or there are follow up documents.
Which status can I use to block/delete/lock approved shoppingcarts which contain errors (but don't after implementation of the corrections)
I tried AM05 AM12 DELE DMLL
kind regards
arthur
Edited by: A. de Smidt on Oct 28, 2010 2:49 PM

Similar Messages

Deleteing messages with status 003 in persistence layer

Dear All
my XI DB is getting bigger and i have found that after running the report RSXMB_SHOW_STATUS , it has Message Status:      003 Number:          5.400.374 messages in DB .. my question is how can i delete theese messages from XI ? what need to be done after delting theese from DB ? will reorg is sufficint ?
apprciate your urgent sujestion in deleteing status 003 (5.400.374) messages permently from the DB ( please see the extract from the report also)
Regards
Buddhike
Number of Messages in Database:
6.180.784
Number of Messages in Client:
6.180.864
Number of Messages for Reorganization in Client:
6.180.927
Number of Messages to Be Archived in Client:
   182.896
Number of Logically Deleted Messages in Client:
         0
Number of Archived and Logically Deleted Messages in Client:
         0
Message Status
==============
Message Status:      001 Number:             28.971
Message Status:      002 Number:                  0
Message Status:      003 Number:          5.400.374

Hi Buddhike,
To me it looks like you are missing setup of archiving/deletion of messages in the SAP PI system.
Please refer to these:
http://help.sap.com/saphelp_nw04s/helpdata/en/f5/d347ddec72274ca2abb0d7682c800b/frameset.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/41/b715015ffc11d5b3ea0050da403d6a/frameset.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/0e/80553b4d53273de10000000a114084/frameset.htm
Best regards,
Jacob

Delete posting runs with status '30' from PCPO

Hi,
we were able to delete the posting runs from PPOIX and PPOPX table, but posting runs with status "30" are not stored in these tables . Can someone please help me find out the tables where the posting runs with status "30" are stored?
thanks for your help,
krishna.

Thank you.One more quick question, we are also not able to delete records with status '90'( Incorrect Documents).
I am thinking they would be stored somewhere. Can you help?
Edited by: Kannam Krishna Veni on Feb 18, 2010 11:30 PM

Buyer change the PO line items and end up with Awaiting Approval status.

Can you please help to look into this issue.
1.Buyer change the PO line items and end up with Awaiting Approval status.
2. But user claim that she got enough limit and should not route to her manager's approval. Also check with her manager and this PO do not exist his queue.
Any clue or tips on how to investigate on this issue. All your tips are appreciated,
-Rick

You cannot change these POs because their changed version has status
'Deleted'. My proposal to fix them will be the following:
You will have to set changed version as closed(DOC_CLOSED set to X)
and in active version set DOC_CLOSED to space.
__-For the above statement, Can you guys please let me know, which table DOC_CLOSED belongs to and what are the steps to do this, as i come from a functional back ground.__

How to reverse/change SRM PO with status "transaction completed"

We use Extended Classic scenario in our company. There is a PO has outstanding G/R balance, but user accidently hit the button "complete"on this PO in SRM , in result the PO has been completed with status "transaction completed". And nothing can be performed on this PO.
G/R balance is out there and now it has financial impact as it blocked the funding thru internal order.
Anyone have idea how we can resolve this problem. Can we reverse/change the PO status? Please note G/R canu2019t be entered in ECC as restricted.
Thanks,
Frieda

I think it was CRM_JEST. But the way to easily select the correct entries:
1. Go to transaction BBP_PD
2. Enter BUS2201 and the order number
3. Double click on the status table, this will take you to SE16 with all the different status for the PO
4. Select the entry to delete
5. Enable debugging by putting /h into the transaction field
6. Double click "CODE" and change this to "DELE"
7. F8 (leave debugging)
8. Click on the delete icon and save.
Done.

You cannot cancel a change request with status New.

We're just starting to dive into SCSM. We created a test Change Request and now want to delete / cancel it. When we try, we get a message
"You cannot cancel a change request with status New."
Is there an easy way to remove this?
Orange County District Attorney

Hi, a Little late but..
This is a problema from your 3 scsm services, maybe in your principal or secundary server. You must to restart services in an special order and delete application cache.
Please review
http://www.systemcentercentral.com/scsm-2012-tip-all-workflows-stuck-in-new-status-and-never-completing-issue-and-workaround/
it Works!
If you have principal and secondary do it in both servers.
I think this problem is for bad performance in databases and application, so review your hardware design, and logical, so review workflow performance too.
For items when state new, you must change it to inprogress with smlets

How to delete the messages from sxmb_moni with status cancelled

Hi ,
how to delete the messages from sxmb_moni with status cancelled
Is there any report for this
Regards
Suman

I think just for deleting the jobs you can do this only
Scheduling Delete Jobs
To schedule delete jobs, proceed as follows:
       1.      In the Integration Engine -
> Administration menu, choose Schedule Delete Jobs.
       2.      Select the job(s) to be scheduled.
       3.      Specify the start time and date.
       4.      Specify the period you want to use and choose Schedule.
For an overview of all jobs, choose Jobs.

View for active Incidents related to WI (Problem) with status (Active) works but can't be changed.

Hi,
I wanted to create a view of Incidents which are linked to a Problem (any problem).
I did a quick test using the Incident (advanced) class, selected to display Incidents with status Active and [Work Item] Is Related To Work Item and status for Problem with the status Active.
At this first test I didn't bother to select any specific columns to display but just went with the pre-selected ( Description, Display Name, Display Name) and it worked.
I got a list of expected Incidents in the view but having the Description column made it quite useless.
So, when I try to select the columns I find useful it will not update and it returns a No items found message instead.
(image removed due to limitations)
It is of course possible to group by one of the Display Name fields and collapse to get a more workable view but it still lacks a lot of good information. One would like to include ID, title, Created date,
date modified, Display Name for Affected User and Assigned to user, and a few others.
I was just a bit stumped as to why this fails when changing the columns on a view that obviously is possible to create.
Thanks in advance,
Daniel

Consider using the Advanced View Editor( or
the free edition), since it has much more robust criteria and column editing capabilities.

Message stuck in adapter engine with status Hold, how to delete those

Hi,
In Dev system around 6 lac messages are stuck in ;holding' state. How can I delete them. Is there is any standard proge which can delete all these messages.
Can I delete messages of IE with status 'recorded'?
Regards,
Krishna

Hi,
see this wiki
RSXMB_ARCHIVE_MESSAGES Archive XML Messages
RSXMB_CANCEL_NOT_REST_MESSAGES Cancel XI Messages With Errors That Cannot Be Restarted
RSXMB_DELETE_ARCHIVED_MESSAGES Delete Archived XML Messages
RSXMB_DELETE_MESSAGES Delete XML Messages from the Persistency Layer marked for DEL
RSXMB_CANCEL_MESSAGES Mass cancellation of error messages - XI
RSXMB_SHOW_REORG_STATUS & RSXMB_SHOW_STATUS provide an overview for all XML messages in XI persistency layer.
RSXMB_MESSAGE_STATISTICS2 which provides the processing statistics. This report basically analyzed the history table.
RXWF_XI_UNSED_MSGS report helps in converting messages states other than 003 to final state i.e. 003.
SXMS_REFRESH_ADAPTER_STATUS report helps in converting message sates like 001/008 into final state.
http://wiki.sdn.sap.com/wiki/display/XI/PIArchivingConceptual+Overview

Which FM to use to change the PO number in an Invoice Document with status = 3

Hi Experts,
My requirement is to change the PO number in an Invoice Document. The Document Status (RBSTAT ) is 3. I tried with 'BAPI_INCOMINGINVOICE_CHANGE' but its not working instead showing a message 'Further processing of document not possible (Faulty status)'.
I guess this BAPI works for only invoices with status A, B, C, D or E. Please suggest me how to solve this.
Regards,
ABAP User

You don't need to as Breakpoint mentioned. The values are determined by the data you pass to the function module - if you need a different value in your 6.0 system than you have in your 4.6C system, then you need to adapt your call accordingly, e.g., blocking or closing any open items that you no longer need and thus setting the status to 'C' in one of the VBUK/VBUP fields.

Digital Signature only Release Status with 3(Approver) Signer

Hello SDN Folks
I have done all the basic settings for Digital Signature which is sawn in following link
http://wiki.sdn.sap.com/wiki/display/PLM/Digitalsignaturein+DMS
it is work fine with 1 RE (Release) status and 1 Signer
We have in process to implement Digital Signature with only two Status
our scenario is
Document Creator Create Document With Status CR
Document Approver Approve Document With Status RE
now we have scenario that For 1 Document we have 3 Approver and 3 approver must digitally sign on DIR
our status is
only CR(create)---->RE(release)
so how i can attached 3 digital signer with only 1 RE(Release) Status
is it possible to go with 3 digital signer with only 1 RE (Release) Status ????
Regards
Tushar Dave

Hi Tushar,
Your requirement of utilizing 3 different approvers for a single 'Release' status in a document type/s can be addressed via the approach proposed below:
1.Define 3 individual authorization groups
2.Define 3 individual signatures
3.Define a common signature strategy
4.Assign the above 3 individual signatures to the common signature strategy
5.Define the signature sequence(the order in which the 3 approvers must approve)
6.Define users and restrictions(signature assigned to relevant approvers/users)
7.For the document type in question for the 'Release' status,assign the above signature strategy and test.
For more detailed information on using digital signature effectively,refer the below link
http://help.sap.com/saphelp_470/helpdata/en/9f/857f3a1c7b11d294d200a0c92f024a/frameset.htm
Regards,
Pradeepkumar Haragoldavar

How to delete a PS network with status 'Technically Completed' (TECO)?

Dear all,
We have Webdynpro application, which will create a PS network in background. In the past it was working fine and many PS network are created. Now we have a scenario where some of the networks which are with status 'Technically Completed' (TECO) needs to be deleted from system. I tried to delete it from CJ20N, but it was not possible as the status is set to TECO. Please let me know how to delete a PS network which is with status 'Technically Completed' (TECO).
Thanks in advance.
Regards,
Vijay

The cluster goes out and finds all networks that are available. This is an automatic process. As long as there is a network there, it will show it. If you don't want it to show, disable the interface and it will disappear.
. : | : . : | : . tim
Thanks a million Tim! Disabling the correct interface made it disappear!
Actually, I had disabled the interface before I started this thread. When you posted the suggestion, I went back and looked at the network connections again and found out that I had disabled the wrong interface! My bad!
However, here is the interesting thing:
After I disabled the NIC and it disappeared from the FCM I physically disconnected its cable (actually I disconnected all unused / unconfigured NICs) ....then I re-enabled it. Now I see that FCM does NOT pick it up again.
I think FCM picked up those NICs because at one time I had put that NIC in the production VLAN (from the switch side).
One observation:
If you have NICs in a HV machine which are not connected to a switch, they do NOT show up in FCM. Once you connect them to some network, they start showing up. I guess by connecting them to a network, they are able to see NICs in other HV nodes.
Take a look at this screenshot. I have 6 NICs in there which are disconnected, none show up in FCM
-Rajeev rajdude.com

SM13 Update Request Failed entries with status "Enqueques deleted"

Hi Experts,
I viewed transaction SM13 and there are entries whereas the updated request is failed and the status is "Enqueque deleted". Unlike with other updated request failed with status "Error", error message is provided. However for those with "Enqueque deleted" there's NO error. Do you have any idea what went wrong having such status? Thanks in advance!
Best Regards,
Kurtt

Hi Royit,
Thank you very much for your response. are there any means of tracing who deleted/released it? Thanks in advance!
Best Regards,
Kurtt

How can i delete or archive idoc with status 30,02,51

I try to delete idoc with Sara and also running program RSEXARCA with.
When create variant and i want to choose the status i can't find the status 30, 02, 51.
How can I delete thus idocs with this status?
Thanks
Menashe.

Yes. WE11 Would do.
But, one request.
Next time when you post a query related to Idocs, post it in Data Transfers section. If you do so you will get very quick reply compared to the response you get in ABAP General Section.
Thanks,
Babu Kilari

Master Batch change for serial number in stock with status "ESTO" by IQ02

Hi,
How to change master batch for serial number in stock with status "ESTO" by IQ02 transaction?

Hi Harsh,
if this field is not ready for input you have set the stock check to '02 Error' in your serial number profile in order to ensure
consistency between the stock data of serial numbers and inventorymanagement.
In this case you have to do a material movement posting inMB11 with movement type 309 (material to material). Enter the new batch as batch of the receiving material. This movement will update both the master batch and the stock batch of the serial number.
Regards,
Mauro

Delete shoppingcarts with status approved or change status

Similar Messages

Maybe you are looking for