Delivery header output issue

Hello every one,
We have a plant assigned to multiple storage locations(A,B) and we have different printers at both the str.locations.(1,2)
Output procedure is assigned to the delivery header.
when ever i use storage location A it should print on printer 1
and
when i use storage locaiton B it should print on printer 2.
Storage locaiton details are stored at the delivery item level.
how can i separate the printers based on the storage location and print the doc from delivery header?
Configurations, development or requirements.... please advice
Thanks in advance
Sumanth

Hi Sumanth,
If you already have plant and storage location in key combination to set the condition record, you just need to maintain the printer name into "Communication" data of condition record in tcode "VV22".
If you don't have plant - St Locn in key combination you'll need
1) Maintain the condition table for fields plant, storage location and delivery type. (path SPRO>LE>shipping>Basic functions>Untruth control>O/P determination>O/p determination for o/b delivery)
2) Assign newly created table to the access sequence which is assigned to condition type. (path SPRO>LE>shipping>Basic functions>Untruth control>O/P determination>O/p determination for o/b delivery-->Maintain Access Sequence)
With above setting you'll be able to maintain condition record with the new key combination and then can maintain the printer 1 for plant "A", st locn "B" and delivery type "LF". Also can maintain printer B for combination "A", "C" and "LF".
Hope this will help.
Regards,
Sudhir

Similar Messages

Delivery Header Output Determination Issue

Hi all,
       I have a scenario like below.O/P condition type OPT has to be determined in Delivery header based on the Payer.
       I read the IMG-S&D-SYS.MOD-New fields for O/P Determ with Condition technique. Based on that i added the Payer Field KUNRG in KOMKBV2-Header for Communication O/P in Delivery.Since KUNRG is already in KOMB it didn't add it in the structure KOMBZ.Now i created a Condition table,Access Seq and when i assign the condition record i am not able to see all Payer in F4 of KUNRG.
       Am i missing something. Have i assigned wrong field in KOMKBV2.
I have a doubt if KNRZE might work? Plz clarify.
Thanks and i Appreciate your valuable time.

Hi Sumanth,
If you already have plant and storage location in key combination to set the condition record, you just need to maintain the printer name into "Communication" data of condition record in tcode "VV22".
If you don't have plant - St Locn in key combination you'll need
1) Maintain the condition table for fields plant, storage location and delivery type. (path SPRO>LE>shipping>Basic functions>Untruth control>O/P determination>O/p determination for o/b delivery)
2) Assign newly created table to the access sequence which is assigned to condition type. (path SPRO>LE>shipping>Basic functions>Untruth control>O/P determination>O/p determination for o/b delivery-->Maintain Access Sequence)
With above setting you'll be able to maintain condition record with the new key combination and then can maintain the printer 1 for plant "A", st locn "B" and delivery type "LF". Also can maintain printer B for combination "A", "C" and "LF".
Hope this will help.
Regards,
Sudhir

VF02- Issue while going into Menu Goto- Header - Output

Hi experts,
when i go in VF02 transaction and when i go to menu -goto
header - Output .
Then i select existing output and click on Repeat output button .
Then i select that output and click on Processing log button i get following message "No error log exists".
Can you please let me know why the error message is comming.
Thanks & regards,
Chetan

Hi Chetan,
May I know why you are creating more than one threat on the same issue?
I've replied you below on the other 2 threat:
start quote
"No processing log exists" should mean the output was generated successfully. Please let know if this is not the case.
You can give me more detail & I will see how I could be help.
Thanks.
-end quote-
Best regards,
HC.

Determining only one output type (out of 4) in delivery header

Hello everyone!
We have 4 different Label Output Types (in delivery header). And the requirement is to print only 1 output type (depending on Customer No.)
I made the 4 output types link to one Access Sequence. Defined some condition records for each Output type and defined the same tables in the Access Sequence. So the access sequence has 4 accesses (exclusive flag checked)
Now when I create a delivery with a Ship To number which has condition records only for only 1 output type. I mean it passes the first Access in my access sequence and hence should only print the output type that has condition record for that "Ship to" number. Yet it is printing all 4 output types.
Any help is appreciated .
Regards,

Hi Vineet,
Appreciate your help. I was actually getting it right, don't know what I was thinking. It works good.
regards,

Stop generating delivery IDOC output (outbound IDOC) if goods issued!

How to stop generating delivery IDOC output (outbound IDOC) if the delivery has been goods issued?! Any user exit or BADI for this?!
Thanks

We take a routine in output requirement! it's done!

Packing Status at Delivery Header

We are in the process of creating a form that will include the details of the all delivery items packed on a handling unit. We want the output to be triggered automatically when the delivery has been completely packed.
We created a requirement to look at the packing status at delivery header level. There is a packing status field (VBUK-PKSTK) at delivery header level and packing status (VBUP-PKSTA) at item level.
We did not expect the delivery header level header to change to "C" until all item were "C". However, the header level field changes to "C" when the first item on the delivery is packed. I
I looked through the SAP Notes to see if there was something there to address this, but could not find anything.
I then searched the forums and found a message from 2007 saying that you must configure item categories with "must be packed" in order for this to work. I know we do not want to configure our system that way. We have many sites and most do not use handling units.
However, before I have my developer add code to check all statuses at item level prior to triggering an output, I want to make sure this is what has to be done. And I have not missed a note to correct this.
Thanks in advance.

HI,
Go to transaction "SE16N" and enter table "VBUK" and give the delivery number in the field sales document number. Now you type "&SAP_EDIT" in the transaction bar and execute. Here you can change the status(Total goods movement). And see If you can actually bill the document. Kindly please let me know If you need any more information on this.
Regards,
Ram Pedarla

Goods Movement Status B in Delivery Header & C in Delivery Item???

Hi Frens,
I have created a delivery document whose Goods Movement Status is B in delivery Header and C in Delivery Item.
Can anyone explain, why it happened like this??
Regards,
CK

Hi
It may be due to some inconsistency. Please run the report RVDELSTA from SE38 to solve the status issue
regards,
Ramana

Billing document not relevant at delivery header level

Hi,
In one of regular scenario i got the Billing document not relevant at delivery header level in processing tab.
can plz advice me that what's the cause for this ?
I am using item category tan at both sales order and delivery level.
Thanks
Bhushan

Hi Bhusan,
Go to: VOV7
Select Item Cat. as "TAN" and Double Click.
In Tab: Business Data, Check the entry for Field: Billing Relevance.
Entry must be "A - Delivery-related billing document"
Another check:
Go to: VTFL
Select Delivery-Billing Combination.
Go to Item (left-hand tree structure).
Select Item cat. as "TAN".
Here, in Field: Copying requirement, Check entry as "004 - Deliv-related item"
Hope this may resolve the issue.
Best Regards,
Amit

PGI status at delivery header level has not updated

Dear Friends,
We had created deliver, picking was completed and PGI was completed successfully. However when we try to create Billing, an error occurs stating that PGI is not completed.
Further when we check the delivery, the Goods Issue status at item level is completed but at the Header level the GM is B which is partially completed. In the Document flow we can see the PGI Status is completed.
I think there might be some table which was not update. Is there any way to update the status in the delivery?
Further we tried to reverse the PGI through VL09, but system is not able to find the delivery ..this might be because the system might be checking in some table where the statues has not updated.
Please suggest me how should I complete this.

HI,
Go to transaction "SE16N" and enter table "VBUK" and give the delivery number in the field sales document number. Now you type "&SAP_EDIT" in the transaction bar and execute. Here you can change the status(Total goods movement). And see If you can actually bill the document. Kindly please let me know If you need any more information on this.
Regards,
Ram Pedarla

Dates on the inbound delivery header

Hi Gurus,
Can anybody please explain me what is the use of dates tab on the inbound delivery header. What is it used for? How can we activate/populate this. We are looking for the ASN functionality to be turned on. Any help is greatly appreciated
Thanks
Anusha

Picking = planned time to start picking
Trans. Planning = planned time to start processing shipment
Loading = planned time for loading
Planned GI = planned goods issue date
Delivery Date = planned date to deliver
The dates can be used for planning various warehouse activities and they should be populated by the system when the delivery is released based on entries maintained in the sales order.
The dates can all be the same or different depending on your needs. They are used for various things (depending on your config) we use the planned goods issue date to show the date we want to the delivery to ship and we us the transportation planning date (same as planned goods issue) to calculate transit time for revenue recognition.
basically delivery processing, shipping scheduling dates that can be used or not depending on your needs

BAPI for adding text in the delivery Header Text Tab?

Dear All,
We are using the SAP standard BAPI to create the delivery Document by inputing sales order number.
The issue is that the customer is maintaining the Truck number in the delivery Header Level Text Tab, now he wants that he will give the sales order number and truck number as inputs the BAPI as to create the Delivery document and the truck number should appear in the Deliver header level text tab ("Truck No" text object maintained)
Please suggest asap.
Regards,
Javal;

Dear Javali,
Have you tried the function module 'CREATE_TEXT' ?
Check and revert back.
Thanks & Regards,
Hegal

Data base tables for delivery & post goods issue

Hi,
can u plz tell me which database tables are going to update after the delivery is completed?
which database tables are going to update after post goods issue.
Thanks for ur help.
Regards
pabitra

Hi,
Check the folowing tables:
LIKP : Delivery header
LIPS : Delivery items
VTTP : Shipment item
VTTK : Shipment header
VBFA : Document flow
VBUK : Header status
VBUP : Item status
Regards,
Santhosh

How to delivery the output to both filesystem and printer using BurstingEng

Hi,
I am using BurstingEngine to delivery the pdf output to filesystem.
I am able to delivery the output to either filesystem or printer, but we need to delivery the ouptut to both filesystem and printer.
the control file i am using is:
<?xml version="1.0" encoding="UTF-8" ?>
<xapi:requestset xmlns:xapi="http://xmlns.oracle.com/oxp/xapi">
<xapi:request select="/TMP001/LIST_G_ORDER_BY/G_ORDER_BY/LIST_G_INVOICE">
<xapi:delivery>
<xapi:filesystem output="/tmp/${TRX_NUMBER}"></xapi:filesystem>
<xapi:print id="xerox6350-2ne" printer="ipp://localhost:631/printers/xerox6350-2ne" copies="1"/>
</xapi:delivery>
<xapi:document output-type="pdf" delivery="xerox6350-2ne">
<xapi:template type="rtf" location="/u04/app/oracle/product/fdev/fdevcomn/java/oracle/apps/fnd/cp/nsfcus/INVOICE.rtf" />
</xapi:document>
</xapi:request>
</xapi:requestset>
it is giving the following error.
[102506_094844261][oracle.apps.xdo.batch.DeliveryHelper][EXCEPTION] oracle.apps.xdo.delivery.DeliveryException: File does not exist : /tmp/102506_094840769/3.pdf
[102506_094844263][oracle.apps.xdo.batch.DeliveryHelper][EXCEPTION] java.io.FileNotFoundException: /tmp/102506_094840769/3.pdf (No such file or directory)
Thanks in Advance,
Raj.
Message was edited by:
user538335

Hi,
This is a bug in 5.6.2. We fixed it in the next release.
If this is a critical issue for you, please log a TAR and escalate the issue so that we can review it and backport the fix if necessary.
Thanks,
Shinji

Sales District updation in Delivery header table

Dear Gurus,
Sales district is mandatory field in customer master and is copied to the sales orders, when the delivery document is created the sales district is not copied.
Is there any technical way or customization process to update the sales district in LIKP.
In this project we ARE NOT USING shipment and transportation process.
the process implemented here is Sales Order creation, followed by delivery creation (picking and Post goods issue) and finally Invoice creation and posting to accounts.
Kindly help me in achieving the updation of Sales district in LIKP table.
Thanks and Regards
LR

Hello,
The current copy control setting between the sales order and delivery is as per the standards.
ie 001 - Header
Please suggest a better approach whether:
Data Transfer routine - 001 -Header (FV50C001) which is a default routine to be copied and add the logic of updating the sales district in delivery header and maintain in place of 001
or
copy the Data transfer routine - 002 - Business Data ( FV50C002) to a new routine activate the logic of copying the sales district from VBKD to LIKP and maintain in place of 001
The replies suggested by seniors is very helpful.
Kindly help me to come out of my confusion.
Thanks and Regards
LR

Plant Field from Delivery Header

Hello Gurus,
I am trying to understand what is the Plant (WERKS) field on the Delivery Header(LIKP). Where else is this Plant (WERKS) stored in SAP Tables. I do not want to take it from the LIKP table because of a limitation. So can anyone help me if this field is available in any other table in SAP.
Thanks,
Jayaswy Kota

Hi Pranava
check this tables in se12
MARA-General Material Data
MARC-Plant Data for Material,
MARD-Storage Location Data for Material,
EBAN-Purchase Requisition
EINE-Purchasing Info Record: Purchasing Organization Data
EKBE-History per Purchasing Document
MKPF-Header: Material Document
hope clear your issue.
Regards,
Krishna.

Delivery header output issue

Similar Messages

Maybe you are looking for