Goods Movement Status B in Delivery Header & C in Delivery Item???

Hi Frens,
I have created a delivery document whose Goods Movement Status is B in delivery Header and C in Delivery Item.
Can anyone explain, why it happened like this??
Regards,
CK

Hi
It may be due to some inconsistency. Please run the report RVDELSTA from SE38 to solve the status issue
regards,
Ramana

Similar Messages

Goods Movement status of delivery not updated from C to A

Hi
I am facing a peculiar problem.
We reversed goods issue using VL09 however the goods movement status of the delivery has not been updated. The GM status is still showing C- Completely processed.
If we are trying to repeat the process again thinking that reversal has not been done using VL09 for that particular delivery error message is displaying already the goods reversed.
Here we are missing the link. Though the goods reversed status has not been reflecting in the delivery.
Regards
Maruthi
Edited by: MARUTHI RAM on Apr 18, 2009 1:25 AM

1) First check in MB51 with movement type 602 whether you could see the delivery reference
2) Next go to VOV7, select your item category and see what is maintained for the field "Completion Rule". It should have been "B".
3) Next go to VTLA, select the item category for the combination of your order type and delivery type and see whether you have maintained "+" for the field "Pos./neg. quantity"
thanks
G. Lakshmipathi

Inbound delivery goods movement status.

Hi,
Goods receipt is posted against an inbound delivery. Goods movement status shows as completed (Status C) in VL33N transaction. However when I look at delivery status in the table VBUP it shows the goods movement status as A.
Does any one of you faced this issue. If faced what would be the root cause..?
Is there any OSS notes available to correct this issue..?
Please let me know your thoughts
Thanks
Umakanth

Hi Fernando,
Which transaction are you using for the posting?
Please, consider that Inventory Management Transactions (MBxx, MIGO, etc) do not update the Inbound delivery status and document flow.
If you use a Shipping Transaction like VL32N for the receipt, then this should update the delivery.
You can see the SAP Note 199703 about this.
As of Release ERP 6.0, MM transactions can update the inbound delivery if this has been activated in the customizing.
See the Note 1050944 in this regard:
"As of ERP 6.0, you can use inventory management transactions (MB0A, MIGO, MBST) to carry out the goods receipt for inbound deliveries in the standard SAP system in such a way that the inbound delivery that is relevant for goods movement is updated.(...)".
If you are in this release or higher you might want to see this note.
I hope this helps!
Esther.

Form display based on Goods movement status

Hi all,
Delivery note should be printed only when VBUK-WBSTK (Total Goods movement status) is equal to C (Completely processed). Can this be done in a Smartform? If so how?

Hi,
Check the condition in driver program before calling the smartform.So that it will call the smartform based on condition.
Thanks,
suma.

Total goods movement status using structure 'LEDLVSTATDISPHEAD'

Hi,
I'm trying to get the 'Goods movement status' for a Delivery once PGI posting is done. However the tables VBUK & VBUP maintain this status at Sales order line item level. This doesn't give the correct picture in cases where there are more than 1 Delivery for a Sales order line item.
At Delivery level the 'Goods movement status' leads to a structure 'LEDLVSTATDISPHEAD'
Please advice how to get a field value (for goods movement status) using this structure ...
Thanks & Rgds,
Pradeep

Hi-
Just wondering to know how you were able to resolve the issue. i am facing similar situation, can you please let me know how was this sovled.
Thanks.
Ramesh

The total goods movement status not changed after goods receipt using MIGO

Dear gurus:
when i use T-code MIGO doing goods-receipt against Inbound delivery, the total goods movement status don't changed. i tryed VL32N to do goods receipt, and the status changed.
how can i do to make the status change when i receive goods in MIGO against inbound delivery?
best wishes,
David

Hi,
If your MM is integrated with WM (SU mgt or HUM) you have to post the GR with Inbound delivery.
Amit

Total goods movement status in SD module

hi all,
wht is "Total goods movement status" is SD module .
can u explain me with an example and how can i use it in creating open return orders.
thanks

Can we do PGI from VL03N? I dont think it is possible. I can see that the PGI option is always in disabled mode in VL03N.
You can only do PGI from VL02N
Can you check whether a material document was created by clicking on the document flow from VL03N ? What happens when you do the PGI for the same delivery again in VL02N?
Regards,

Goods Movement and Billing status at header level

Hello,
Im new to this topic and have some very basic questions
Will WBSTK field be updated with goods movement status for a given sales order number in VBUK table ?
Similarly, will FKSTK/FKSTK or BUCHK will be updated with billing status ?
I know that for a given delivery document number, I can track the status at the item level.
But my aim is to know the overall goods movement and billing status at the order header level.
Any clues will be of great help.
Thanking you in advance.
Regards,
Preethi

Hi Preethi,
A sales order does not determine a billing status for delivery related billing, field VBUK-FKSTK is only determined for delivey.
Just because of this, you will not find billing status field in VA03 -> goto header;
you could only find billing status field for delivery in VL03N -> status overview.
Best regards,
Crystal Lin

Goods movement / PGI status A inspite of goods movenent having completed

In an o/b delivery for all items goods movement status is u201CAu201D(Not yet started) and the u201CPost goods issueu201D button is active.
However, in the document flow, goods issue is completed.
The document also looks fine with the accounting entries
It was not possible to reverse the PGI using VL09, there was no message what so ever.
Why is there a discrepancy and how to solve this.

Dear Vaibhav,
This may be related technical issue so please take help of ABAPer to fix the issue.
I hope it will help you,
Regards,
Murali.

GI:How to set Indicator:Item Not Relevant for Goods Movements LIPS-NOWAB

Hi,
does anybody know what i have to do to get the Indicator: Item Not Relevant for Goods Movements set for a good issue delivey position? (Table LIPS field NOWAB)
thanks in advance
Steffen

Hi,
the thing is the following (maybe it doesn't work at all, i don't know) :
a) i have a "Non-stock" material (e.g.material type NLAG)
b)this material should be picked, so it should be relevant for the delivery (e.g.item category TAX)
c) for a special reason the "Total goods movement status" in the outbound delivery header shouldn't be "Not relevant", therefore i assigned the item category TAX to a shedule line category that has a movement type (e.g. CN)
d)but the bad thing is, that the customer has set the indicators "quantity updating" and "value updating" for the material type NLAG, and so the goods issue posting gets some errors. eg.g missing storage location etc.)
During debugging i found a coding that checks the sign NOWAB of lips, the documentation says:
"You can use this indicator to control whether the item is relevant for goods movement when the delivery is still being created.
When this indicator is set, goods movement is not posted for this item - regardless of the movement type assigned to it."
So i head the idea it might be possible to set this indication (Lips-nowab) somewhere in the sales order or somewhere else but maybe this conflicts with point c) above .
Maybe shomeone knows what to do or has a better idea.
Best regards
Steffen

Creating new goods movement

Hi everybody !
I should create a new goods movement and link it
to a sales order delivery using WS_DELIVERY_UPDATE_2.
Using this function infact I can't set number or movement.
Thanks
Alice

Hi
Check transaction "OMJJ"
Reward points if it helps.
Regards
Karan

New goods movement

Hi everybody !
I should create a new goods movement and link it
to a sales order delivery using WS_DELIVERY_UPDATE_2.
Using this function infact I can't set number or movement.
Thanks
Alice

Could you please elaborate? What kind of "number or movement" are you talking about? Do you mean the movement type (BWART)? Please also specify whether the delivery is WM relevant or not.
In any case, you might want to take a look at BAPI_GOODSMVT_CREATE instead.

Restricting Sales Order Form header notes appearing on delivery header

Hi,
Can someone please advice as to how to we can restrict the sales order form header text appearing on the delivery header?
Thanks
Keshi

Dear Keshi
In VOTX find out the procedure for your sales order header and Delivery header
Go to delivery procedure for header you will find Text Id (which you want to remove in delivery header) which is also present in sales order header.
Remove that text id from the procedure .
Please check if that procedure is not used for other deliveries, if it is used than define new procedure for your deliveries.
Regards
Jitesh

Packing Status at Delivery Header

We are in the process of creating a form that will include the details of the all delivery items packed on a handling unit. We want the output to be triggered automatically when the delivery has been completely packed.
We created a requirement to look at the packing status at delivery header level. There is a packing status field (VBUK-PKSTK) at delivery header level and packing status (VBUP-PKSTA) at item level.
We did not expect the delivery header level header to change to "C" until all item were "C". However, the header level field changes to "C" when the first item on the delivery is packed. I
I looked through the SAP Notes to see if there was something there to address this, but could not find anything.
I then searched the forums and found a message from 2007 saying that you must configure item categories with "must be packed" in order for this to work. I know we do not want to configure our system that way. We have many sites and most do not use handling units.
However, before I have my developer add code to check all statuses at item level prior to triggering an output, I want to make sure this is what has to be done. And I have not missed a note to correct this.
Thanks in advance.

HI,
Go to transaction "SE16N" and enter table "VBUK" and give the delivery number in the field sales document number. Now you type "&SAP_EDIT" in the transaction bar and execute. Here you can change the status(Total goods movement). And see If you can actually bill the document. Kindly please let me know If you need any more information on this.
Regards,
Ram Pedarla

PGI status at delivery header level has not updated

Dear Friends,
We had created deliver, picking was completed and PGI was completed successfully. However when we try to create Billing, an error occurs stating that PGI is not completed.
Further when we check the delivery, the Goods Issue status at item level is completed but at the Header level the GM is B which is partially completed. In the Document flow we can see the PGI Status is completed.
I think there might be some table which was not update. Is there any way to update the status in the delivery?
Further we tried to reverse the PGI through VL09, but system is not able to find the delivery ..this might be because the system might be checking in some table where the statues has not updated.
Please suggest me how should I complete this.

HI,
Go to transaction "SE16N" and enter table "VBUK" and give the delivery number in the field sales document number. Now you type "&SAP_EDIT" in the transaction bar and execute. Here you can change the status(Total goods movement). And see If you can actually bill the document. Kindly please let me know If you need any more information on this.
Regards,
Ram Pedarla

Goods Movement Status B in Delivery Header & C in Delivery Item???

Similar Messages

Maybe you are looking for