Delta Failure in Infospoke

Hi Experts,
I have a doubt here on infospokes.
1] Is there any possibility to recover delta if it fails in Infospoke Extraction.? if Yes then please tell me how to recover for the infospoke. I know this is different compared to the data load delta. But this is the first time that I'm working on the Infospokes. So Please guide me on this.
2] I have a delta Infospoke with the selections on CALDAY(from 2006 to 99) and Company Codes. So initially we wil be taking full load and then after converting this infospoke to Delta in Delta Admin, then Delta will be taken care for the future. But I here I wud like to know will the delta will work for those selecions only? I mean.. Delta will pick the new or changes records for those selctions only or this selection is only for Full update.? I got confused over here. Please guide me,
thanks for ur valuable advices in Adv.
thanks
Bulli

Hi SDN Experts,
Can anyone tell me the solutions for this ...
And the steps which we need to proceed whent the delta fails..
I appricate your thoughts on this..
thanks
Bulli
Message was edited by:
Bulli

Similar Messages

Regarding Delta failures in bw.

Hi bw guys,
   This is vasu mailing a Question to of all my forum friends regarding delta failure.
   This is an urgent and send me the answers to me.
   when the data is coming from some tables we kept it as an Time stamp for Generic delta and it is going to ODs to ODS when the delta fails from this ods to ods what is the procedure we can do.
I am expecting the solution from you so fast.

Hi,
Till first ODS data is loaded or not, what is error it seems.
Check the selections and Initializations for second ODS.
Regards,
Venkat

How to use Delta Update in InfoSpoke

How to use Delta Update in InfoSpoke & to include in Process Chain

Initialization / delta updates are what we do every day, and it is usually the update method of choice for most data targets. The delta mechanism ensures the consistency of transactional data. So if some data is wrong in the early stage of data flow, we have to not only correct the data itself but also the related records in subsequent data targets.
Unfortunately, such data can't be avoided in daily extractions. In some situations, the data to ODS is correct but reports errors while loading from ODS to Cubes.
Here is one example:
Some FI documents transferred in R/3 with LSMW's background mode and one of the line items 'Negative posting signal' was inserted with 'x' while the right one should be 'X'.
This line time stays cool in my ODS Z1CCWO01, but encounters errors while loaded into several Cubes when the process chain's running.

Delta Extraction using Infospoke

We are currently on BW 3.1C with 3.3 business Content. I have created an infospoke to get data from ODS object into db table. I am trying to get delta and also turned on the techinical Key on the infospoke but when I run the infospoke I get before and after images. Is there any way that I can get just the changed record if not how can I identify the changes do I have to build my own logic to capture changes?? I dont understand how the delta works on Infospoke for an ODS object and I am not sure whether I am creating it correctly. Please help.
Thank you,
Neelu

Roberto,
I have created an infospoke off of an ODS which contains MARA table. My question with respect to infospoke
1. if you are looking to send only changed records to the different target like db table would you check the technical key
2. if an existing record is changed with the technical key on it would add another record so when reporting off of the db table i will see multiple records where as our requirement is to see the most updated record.
Thank you
Neelu

How to handle delta failure in COPA?

HI FOLKS
I appreciate if any one can take me through how to handle delta load failure in COPA?Also I need whether we have any other method for 2004 release...to handle delta issue in COPA.......
no doubt Step by step walk through will definetely gain full points...
Regards
GTR

Hi Indu,
I will try to implement this HowTo and see what happens. I hope, it works with it.
Thanks for your advice.
Kind regards,
Ali

Delta's in infospoke?

Hi Team,
We are sending data daily to data base table by using infospoke from the DSO with delta update. Now I want to load specific billing document numbers to that data base table by using infospoke.
I want to load required billing document numbers with out disturbing the existing delta's
Please guide me to achieve this.
Helpful answer will be appreciated with points.

Hi,
If you create New DTP with Full update (Use filter as Billing document ),
it will not distrup the existing delta .
Regards,
Satya

DSO to Cube Delta Failure

Hi All
We appear to have a major problem.
Yesterday the invoice delta from DSO to Cube failed. My colleage traced the problem to invalid characters in the PSA. However it had loaded successfully into the DSO (I dont know why cos it usually fails into DSO if invalid chars are present).
So we deleted that request from the DSO (even though it was green), fixed the invalid chars in PSA and then manually updated from PSA to DSO. Fine all went well so far.
Then we ran the delta load from DSO (datamart) for cube but this came back with error saying 'Previous delta has not finished so cannot proceed' All monitors were RED status but still no good. So we left it thinking that todays process chain run would fix it.
But it didnt. The error today is 'Delta update for ZINV_CUBE is invalidated. Message no. RSBM113'
The data in the DSO is all correct and upto date. However the datamart status for all requests (going back to Nov 2007) is missing. In the infosource view the outgoing request (REQU_) for Yesterday is missing and todays REQU has red status. Yesterdays incoming request (ODSR_*) is followed by todays incoming request.
From reading previous posts I think I need to do initialise without data transfer, but will that leave the cube with 2 missing requests (today and yesterday). How do I get them into the cube ?
I could delete the cube contents and perform init with data but I dont feel comfortable as it involves nearly 2 years worth of data. Also will all DSO requests get rolled up into a single cube request ?
All advice very much appreciated
Asif

Hi,
Hope so the requests for today and yesterday is there in PSA....
Now change the RED status of the failed requests in DSO and cube manually to RED i.e QM status...here only u have faced the issue that previous delta was not yet finished...
U can chk in SM12 for any locks present....
Now u can delete the requests in cube(this will delete the data mart status from ODS) followed by DSO...
Now first u load the data to the ODS manually, activate the ODS and then uplaod it to cube manually thru additional function->update data to targets->Delta update and continue...this'll load the complete data for the two days...
No need to perform INIT if the data is presetn in PSA....
rgds,
Edited by: Krishna Rao on May 21, 2009 6:10 PM

Delta failure in bw side

we load the master data from the source system to bw and it successfully updated but fetching 0 data. but in R/3 side in rsa3 it is showing approx. 9000 records in datasource. I m looking for help immediately.

Hi
Check the extraction mode of IP. Whether it is delta or full.
IF it is delta then it will pick only changed or new records. May there are no changes to your master data since your last delta run.
check the extraction mode in Processing tab of IP
Regards,
Venkatesh

Delta failure

HI all,
When Delta load occures from DSO to CUBE load was failed.In this issue we need to make the request to Red and delete the request from the cube. Then need to delete the Datamart status in the DSO.
My Question is, why we need to make the request red and delete first and then go for Datamart Staus.What happen if we do viceversa.
Can any one give suitable answer.
Regards,
Bunny

Hi Pranav,
The reason why we turn the bad request red and then delete the request prior to the deletion of data mart is as follows:
1) If we turn the request red then we are sending the message to the source system that the last delta was not correct and the records need to be extracted again.
2) The delta queue keeps the last delta records only till the next delta run goes green.
If we don't turn the request red and in case of a green request being deleted accidentally or due to some other reason, then we stand a chance of data loss from the source system. Hence as a precaution we always turn a request that needs to be re extracted to red and then delete the request.
We cannot delete the data mart status if the request still exists in the data target(s). The system will not allow you to delete the data mart directly, it will say data already exists in the target(s).
Hope this clarifies your doubts related to deltas.
Regards,
Manoj

C0-PA Delta failure

Dear Experts
HOW TO CORRECTE THE DELAT FILAURE IN COPA
Record 13 :Arithmetical errors or conversion errors found in routine ROUTINE_0001 record 13
Regards
Radha

Hi,
When you have keyfigures on the cube , based on which if you are doing calculations during run time, If one of the key figure value is "0" and it's calculation leads to infinite, then you will find this arthimatical errors during the loadings.
Please check for any calculations are coded in Start, End & field routine.
Try to put use code
if denominator = 0 then result = 0 or some conatnt etc, depending on ur scenario.
Hope this helps
Shilpa

Delta In infospoke

Hi BW Gurus,
Can any body please give me idea about how delta works in Infospoke. I have to download around 80000 records data from infocube(Reques id say R1, R2 and R3)to DB table. Do i need to create two info spoke (1 for full upload and another for Delta) for same infocube as source.
waiting for ur response.
please help
Regards
MN.

Hi,
Please indicate the release you are working on (really old one like 3.5, or a recent on like BI in SAP NetWeaver 2004s). This works diffently in Bi in SAP NetWeaver 2004s, as the delta is controlled by the DTP delta.
Regards -
Ron Silberstein
SAP

Repeating delta in Infospoke

Hi,
I have missed delta records in Infospoke. The first time 1850 records were uploaded to AL11. But before downloading the file, the Infospoke wa re-run again.
The second time zero records were uploaded to AL11, over-writing the previous file.
Is it possible to get back the delta records again???
Kindly help. Points for sure!!!
Thanks,
Balaji V

Hi
I think it is posssible to get the delta records back with the request number,we have to search for that req in source system

Delta Infospoke Question

Is there a way to set all requests in a delta infospoke from "Not Yet Read" (Yellow) to "Read" (Green) without doing an extract?? I see how to set it from Read to Not Yet Read, but I want to go the other way.

Hi..
I have missed a Delta in the Infospoke. I re ran it again.. But got only zero records, thought there is 1850 delta records. Is it possible to get back the delta records??
Thanks in Advance

InfoSpoke initialise Delta

Hello all,
I have a question to the delta of an InfoSpoke:
I have created an InfoSpoke with download to a flatfile.
When I transport the new InfoSpoke to our productive system and start the delta extraction, I have no possibilty to define, which request from the source should be taken as the first delta. The problem is that my source is an InfoCube with more than 20 billion rows - so I'm not able to create the first delta, as the downloaded file is getting to large.
So - if anybody has an idea, how the extraction is defining the delta (in a table or something like that) I would be very happy to hear from you!
Kind regards
Anja

Anja,
When you extract the data first time use "Full" but always you can retrirct the data by giving proper values in "selection" tabs. Probably you will give a period for selection.
Once you done with this then you can change the infospoke for "delta".
Regs
Gopi
Assign points if it helps ....

InfoSpoke Extraction Mode change from Delta to Full?

Hi,
I am having one InfoSpoke having Extraction Mode: Delta.
I am having one requirement from client that they need data from Same InfoSpoke with Extraction Mode: FULL from the period: 01.2007 to 04.2009.
Can i change InfoSpoke Extraction Mode from Delta to Full directly in the existing InfoSpoke? Will it impact any thing?
Please let me know.
Best regards,
Venkata

Hi Venkat,
It's better to create one more infospoke rather than changing the present Delta one.
As you see it may remove the Delta marker and further it may cause problem in delta extraction from infospoke.
Regards,
Ravi Kanth

Delta Failure in Infospoke

Similar Messages

Maybe you are looking for