Dependent requirement grouping in SCM Product heuristic

Hi,
How to group dependent requirement?
Example - SFG (Semifinished) order created with Lot size =1
dependent demand created  - for child part with lot = 1
Purchase requisition created for child part with lot size >1 (periodic lot size)
are any method to aggregate dependent requirent?
Regards
lav Mishra

Hi Lav Mishra,
Other method to aggregate dependent requirement is to have minimum
and maximum lot size.
When you are using period lot size, you need to put check against
"start of lot size grouping" indicator in procedure tab of Lotsize
in material master of APO
Regards
R. Senthil Mareeswaran.

Similar Messages

  • Strategy 50- Assembly's Dependent Requirement Grouping

    hi Gurus,
    MRP settings of materials I am using is as under
    1.FG-- Strategy-50-----Availability check: CH -
    Indiv Collec ind : 2 ---Consumpt mode : forward/ backward with 30 days each
    2.--Level-1 SFG--
    Strategy-50 -
    Availability check: CH -
    Indiv Collec ind : 2 ---Consumpt mode : forward/ backward with 30 days each
    3.--Level-2 SFGNo StrategyAvailability check 02---Indiv Collec ind : 2 ---Consumpt
    My requirement is to maintain PIR for level-1 SFG...after providing PIR of SFG level-1 and performing MRP run. Planned orders are created agains the dependant requirement of Level-2 SFG which are drawn from PIR of SFG level-1. Using strategy50 i m not able to convert planned orders of SFG-Level 1 into process order on the other hand Planned orders of SFG level-2 are convertible into process order, which is the desired functionality.
    Now if i create a sales order of the FG following results appear.
    at SFG level-1
    - Unconvertible Planned Orders created remain unchanged.
    - PIR is not effected
    - Depandant requirement is created for the quantity exploded from FG sales order and corresponding planned order is also created which is convertible.
    "Desired result is: PIR of SFG level-1 should be consumed "
    at SFG level-2
    two seprate planned orders are created, one against the PIR of SFG level-1 and second agains the dependant requirement of the sales order created for FG ( i.e. FG--> SFG level -1 > SFG level>2)
    Desired Result is
    one netted off planned order to be created at this level..i.e. the planned order quantity should be increased only if the dependant requirement of sales order exceeds the dependant requirement coming from PIR of SFG level-1.

    hi,
    use the strategy 50 only for FG,
    For sfg and raw materials leave the strategy as blank.
    if you use strategy 50 for sfg,the planned orders created would be unconvertible,order type VP.so only use strategy 50 for fg.
    this will solve your issue.
    regards,
    sikkandar basha

  • Cover Dependent Requirements Immediately - Heuristic Call Function

    Hello.
    I have one product with Planning Procedure set to "S" (Cover Dependent Requirements Immediately).
    In our customization "S" profile is:
    Heuristic: ZS_PP_CTP (using default heuristic /SAPAPO/HEU_PLAN_DEFICITS)
    Confirmed Qty Pegging: Checked
    Fix Pegging CTP/ATP: Do not create fix pegging
    my question is:
    My product is in middle of chain process. When runs heuristic for Finished product SCM triggers one heuristic for "Cover Dependents Requirements" , but if i set breakpoint in ZS_PP_CTP don't stop in debug mode.
    Anyone know's what function is called when starts to cover dependents requirements?
    Best Regards

    Debugging and the result is:
    /SAPAPO/FLUSH_AND_ALTERNATIVES
    >>>>COMPONENTS_PLAN
    >>>>>>>>>DEFICIT_PROCURE
    >>>>>>>>>>>>LOTS_CALC
    >>>>>>>>>>>>>>>>SAPAPO/RRP_LOTSIZE_CALC
    >>>>>>>>>>>>>>>>>>>>CALC_LOT
    Best Regards
    Edited by: Marcelo Kayro Quintão on Jun 28, 2011 8:06 PM
    Edited by: Marcelo Kayro Quintão on Jun 28, 2011 8:08 PM

  • Planning of dependant requirements in continuous production

    Hi Experts,
    The scenario is as follows.
    We are producing a bulk material and packing it in to bags. We have orders for bulk material and packaging material. This is a continuous production. i.e. we donu2019t have to wait till the completion of the bulk material production to start the packing.
    Just after the production of 1st batch of bulk, I can start packing. This means the bulk material order and packing material order are overlapped. How can I map this scenario in R/3 MRP so that the overlap appears in the scheduling?
    Thanks & Regards
    Prathib

    Prathib,
    What I am looking for is an overlap when I run MRP.
    I am going to assume that the 'bulk material' is a component of the 'packing material'. I believe you can achieve your requirement through your BOM explosions.  The dates of dependent requirements can easily be offset from the start date of the higher level (packing) order.  
    One method is to assign portions of the Bulk component BOM to different routing operations of the higher level (packing) production order.  For this to work, you obviously must have more than one operation in the higher level (packing) order.  You also must use Lead time scheduling during the MRP run to make this work for the planned orders.
    A second method is to use a fixed offset. In this case, the lower level (bulk) order completion date is offset from the higher level (packing) start date by a fixed duration of days.  This offset can be entered at the detailed item level in the BOM (CS02)
    Finally, you can create a distribution function (OPB3), and a distribution key (OSPA), in which you can fine tune exactly the timing of the dependent requirements, using 'percentage of completion logic'.  This distribution key can then be assigned at the detailed item level of the BOM.
    http://help.sap.com/saphelp_erp60_sp/helpdata/en/f4/7d2b2b44af11d182b40000e829fbfe/frameset.htm
    http://help.sap.com/saphelp_erp60_sp/helpdata/en/ea/e9b42c4c7211d189520000e829fbbd/frameset.htm
    Best Regards,
    DB49

  • CIF - Dependent Requirements for Product Planned Externally

    Hi Experts,
    I have flagged a product in APO to be planned externally [Procurement type: P - external procurement planning].
    I see it has Planned Externally in the Planned Orders where it is used as a component.
    My problem is that que Requirements are not transfered to R/3 so the product can be planned by MRP.
    What are the necessayr settings to maintain (excluding the technical CIF settings to connect R/3 to APO).
    Thanks,
    Marc

    Hi Kumar,
    So basically, you are saying that I can only transfer planned orders through the CIF and that I was wrong in assuming that I could transfer Dependent Requirements directly ?
    Thanks,
    Marc

  • Planning of Dependent Requirements for BOM Components in Make to Order scen

    Hi Friends - I want to execute a full cycle Make to Stock Scenario with Materials planning using MRP.
    The scenario will include BOM Components with Routing.
    The process flow I want to execute -
    1. Create a Sales Order for a Finished Product (Product should have a BOM for Production)
    2. Do the product Materials Planning for the Sales Order through MD50
    3. Get all the dependent material requirements (both for products as Planned Order and also for BOM Components - all the BOM components should also be planned)
    4. Convert Planned Order for Product to Production Order
    5. Convert Planned Orders for BOM components to Purchase Requisition
    6. Confirm Production Order
    To execute this I have done the following
    1. I have created a Material Master data for Finished Product (FERT).
    2. I have assigned Item Category Group - NORM, and General Item Category group as NORM
    3. I have assigned MRP Type PD in MRP 1 View and Strategy Group 20 (Make to Order Production) in MRP 3 View.
    4. Now created a Universal (Type 3) BOM for the product with one material component.
    5. Now also created a Routing for the Material with two operations having PP01 a control key.
    6. Now created a standard sales order for the product.
    7. Executed the MD50 for the Sales Order Item.
    Now where do I find the BOM components for this material in the Sales Order?
    After executing the planning Run MD50 I am only getting the requirements for Product only. I can't see any dependent requirements for the BOM components.
    How do I make sure that the BOM components are also planned while the product is planned?
    I have checked the component Stock Requirement List - there are no requirements generated from the Sales Order Product BOM.
    Pls help me on this. How to do this so that the raw material components are also planned?
    Thanks
    Purnendu

    Hi Dhaval, Sandeep, Ashok - Thanks a lot for your replies.
    I have checked the Planned Order Created through Planning Run.
    If I click on the Components Tab I am getting following message
    No material components were determined
    Message no. 61027
    Diagnosis
    Until now, no BOM explosion has been carried out or no BOM has been created for this material yet.
    Procedure
    Either explode the bill of material for this material, or
    create the components manually by processing the planned order in change mode.
    If I try to explode the BOM through Header Menu - Edit> Explode BOM
    I am getting the same message.
    If I click on the Bill of Material Tab - I am getting the same above messge.
    Ashok - I have tried both the Selection Method -
    Nil - Selection by Order Quant.
    1 - Selection by Explosion Date
    But with no effect.
    Waiting for your advice.
    Thanks and warm regards
    Purnendu

  • MRP: how to segregate the planned orders by dependent requirements

    Hello SAP Guru's,
    I would like to know if this is possible to make the MRP work is this way:
    - generate global planned orders (by date) for several dependent requirements, for inhouse production;
    - AND generate individual planned orders for each dependent requirement, for external procurement;
    For the moment, it is grouping the quantities of all the dependent requirements to generate a unique planned order by date.
    But we would like to get separate planned orders for each dependent requirements that are externally procured.
    Do you think it is possible to do so? and if yes, how?
    Thanks in advance for your help on this subject.
    Regards,
    Rudy

    In MD04 the demand n supply that is seen is considered as plant segment. In some cases when you plan demand n supply for a given storage location separately it is called as SLoc segment, also if you're working with MRP areas then its called mrp area segment, likewise for project & sales order.
    In short it is just a way MRP would do its planning. In normal cases, the demand n supply is in plant segment, so in this segment the least resolution that you can work with is a day, so all demand on a given day is clubbed together and a supply proposal is made (depending on the lot size).
    If you want further split on a given day, then MRP needs some way to identify the difference & this is provided by the special stock segment such as project segment. To see how it works, if you're working with PS module, ask your PS colleague to create a demand for the material from different projects for a given day. Then in MD04 you will see each project demand show up in different segment & when you run MRP, you will see the results.
    I guess more than me writing quite a lot out here, a simple test at your end should help clarify... good luck

  • BOM Explosion/dependant requirements

    Dear All,
    I have a concern regarding the "MRP 4" view in MM.
    BOM/Explosion
    Individual / Collective requirements
    "MRP 3" view
    Availability Check
    Availability Check (Daily / Individual)
    I would like to know the effect of these settings clearly with an example please.
    Thank you in advance

    Hi,
    1. The Individual Collective indicator 1/2 indicates how to club the dependent requirements either Individula Processing or Collective Processing.
    This is generally used in MTO Scenario.
    Here, For eg., you have 2 FERT Materials, in that 1 component say xyz is same.
    If you want to club the requiremnts for for xyz for both the sales orders then you need to select 2.
    By defult system will create PurReq for xyz as Sales Order/Customer Specific.
    2. Now the Availability check:
    Specifies whether and how the system checks availability and generates requirements for materials planning.
    The availability check can be carried out in MRP for the depedendent requirements. This means that the availability check can directly check whether sufficient material is available for the production of the assembly. The availability check is initiated from planned order processing. It is not carried out automatically in the planning run for each requirement of an assembly.
    Checking Group and Checking Rule clubbed together forms the Checking control..
    Hope this helps..
    Regards,
    Siva

  • Consolidated List of Dependent requirements

    Dear friends
    I have entered three months PIR (for nearly 200 products) FGs in MD61. I need to take a print / list of dependent requirements (child requirements) separately to send my internal material supplying departments for their planning. any tcode available to take consolidated dependent requirement monthwise? or we need to go for ABAP. Kindly advise me.
    Thanks & regards
    V.Senthilkumar

    Dear anand
    Thanks for your reply MD46 is giving the stock coverage days and plant stock. Actually I need generate a dependent requirement quantities with plant stock for a given planning period.
    MD47 t-code is for product group, in our case product groups are not used, we are going by PIR based planning.
    Still my problem is not resolved
    Regards
    Senthil

  • Dependent Requirements Planning

    Hey Gurus,
    I have a situation in which I have two materials that are planned with Independent requirements but also have dependent requirements against them.  these two materials are 6001116 and 6001771.  I have set the MIXED MRP indicator to "1", planning strategy "40" and MRP Dep. requirements as "1".
    6001116 is not planning the dependent requirements and is only being planned by the independent requirements.  6001771 is planing both the dependent requiremnets and the independent requirements even though I have set the MRP Dep. requirements to "1".  The only difference between these two materials is that 6001116, is a made in house product and the 6001771 is a purchased product. 
    I can't think if anything else that would control this to put me in this situation.  Do you guys have any ideas for me or things that I should check to make sure that this is working correctly?  I thought it was only the Dep requirements indicator that controlled the planning of independent reqs.

    Dear,
    You donot want dependent requirements
    to be created" for your components when MRP is run
    There are three Options:
    First Option:
    For the all respective components in MRP 4 view Input "1" for MRP Dep.Reqts
    Second Option:
    In the Basic Data 1 view maintain the X-Plant Matl Status maintain "01"(Blocked for Procurement/Whse)
    Third option,
    You can set the MRP type in material master as 'ND' (not planned) (MM02 > MRP1)
    Then Planned orders/Purchase requistions will not be created for the components
    Regards,
    R.Brahmankar

  • MRP Planned order generation for Order reservation excluding Dependent Requirements

    In our Project we have a requirement like for FG stage & SFG1 stage are M.T.O So after sales order are punched through  MD50 we have created Planned orders against sales orders,But dependent stages like SFG2 & SFG3 which are pure M.T.S so only Dependent requirements will get generated.Suppose for SFG1 i have partially converted planned order to Production order then for component SFG2 we get Partial Quantity as order reservation.Now requirement is if i run MRP for SFG2 system need to generate demand only for order reservation excluding Dependent requirements.Is there any possibility where we can generate demand only for order reservation.As system will create Planned order for SFG2=Dependent requirement + Order reservation

    Hi Uli,
    Suppose i have Sales order--100 kgs for FG
    B.O.M levels
    1.FG-----M.T.O
    2.SFG1---M.T.O
    3.SFG2---M.T.S
    4.SFG3---M.T.S
    5.ROH
    So if i run MRP via MD50 system would generate planned orders for FG & SFG1 level as they are M.T.O specific
    Now my requirement list would be
    FG-100kg planned order
    SFG1-100kg planned order
    SFG2-100kg dependent requirement.
    Now suppose i have partially converted SFG1 planned order to production order
    SFG1--100kg planned order to 30 kg production order
    Now my requirement list would be
    FG-100kg planned order
    SFG1-70kg planned order & 30 kg production order
    SFG2-70kg dependent requirement & 30kg order reservation.
    Here my requirement is if i run MRP for SFG2 in MD02 as these stage is M.T.S system should provide 30 kg planned order & if we see down the line it would be like
    Now my requirement list would be
    FG-100kg planned order
    SFG1-70kg planned order & 30 kg production order
    SFG2-30kg planned order & 70kg dependent requirement.
    SFG3-30kg planned order
    ROH-30kg Purchase req
    Client requirement is like these..

  • Dependent requirements in pp module

    I am new to pp and leaning PP module. following terms and concept I am not able to understand
    1. what we mean by dependent requirements?
    2. what we mean by independent requirements?
    3. what we mean by  net  requirements?
    4. what we mean by total  requirements?
    5. what we mean by unplanned requirements?
    please explain in layman terminology. I am not able to understand definitions given by sap.
    Edited by: kavita reddy on Mar 2, 2010 11:35 AM
    Edited by: kavita reddy on Mar 2, 2010 11:35 AM

    Hi,
    To put it in simple words consider the following examples:
    in a car manufacturing company, lets say Swift:
    The sales department forecast the sales for swift which is sent to the production depaertment.
    This requirement for the finished product is called Independent Req.
    Now based on this dependent req, you will have to have the other material like tyres, engines etc.
    This engine, tyres etc are forecasted based on the dependent req.
    This are called Dependent Req.
    Net Req: Lets say your total Dependent Req for tyres is 100 tyres, and you have 20 in stock, so 80 will become your net req.
    Regards
    Vinod
    Edited by: Vinod Mohan on Mar 2, 2010 4:50 PM

  • Dependent requirements

    Dear friends,
    For example I am having a Sales order for 20 items. Due to some constrains, at a time I can not produce more than 1 item. So I am creating a production order for 1 item with reference to a sales order (using CO08).
    My problem is while running MRP, system is creating the dependent requirements for all the 20items. So I want to run MRP for the production order (like MD50 for sales order). Otherwise my MRP run should not consider the Sales orders for the dependent requirements calculation.
    Dependent requirements for all the 20 items is creating a big confusion. My scenario is pure MTO. Down the line all the production is for the respective sales order only.
    Please suggest me...
    Regards.

    Hi Kodand Nag,
    Please explain your scenario once again, I get confused little bit, 
    What I understood from your last reply, u have created sale order  with order qty is 20 nos for one material. (I assume).
    Then u have created prod order for one Nos (Partially – since is capacity constraint) with reference to sale order.(CO08).
    In MTO, system consider the sale order to create dependent requirements for dependent  material.
      Here u want system to consider production order not sale order requirements  – This is not possible.
    My solution is since u have converted partially qty as Production order, order reservations should have created for dependent material, if u run the MRP for dependent material (Next one below the header material) , sale order requirements is not taken into the account only production order req. I hope i am not mistaken, else please comeback.
    Regards
    Pradeep

  • Project MRP - Requirement Grouping in PR

    Dear Experts,
    Please note that I am attaching two finished goods (Material Type - FERT) in the project through network activity, on two different activity. The delivery time for the two items are different. Requirement date is one month different for the two finished goods.
    Requirement Grouping is done through automatic grouping.
    Now when I am running MRP system generates seperate planned order for two finished goods for the same raw material as the requirement date is different. If I am keeping the requirement date is same even though it is planned on different network activity system is making only one planned order for the total number of raw material required.
    Just one doubt..
    Is there any work around to club the requirements of raw material for two finished goods, whose requirement date is different, in one planned order / purchase requisition.
    Thanking you.
    Best Regards,
    Abdul.

    The post has been moved to SCM - PP
    Re: MRP - Requirement Grouping in PR   - Project Stock
    Tnx.
    Abdul.

  • MRP Dependent requirements - How to define

    Hello.
    If I set "1" in MRP Dependent requirements field the Depended Requirements are excluded, but also the Order reservations.
    Can i somewhere set so that only depended requirements are excluded and not the rest?
    Thanks in advance.
    /Gherry Svantesson

    Dear,
    In the MRP dep.requirements field, you set the indicator to 1 so that dependent requirements (reservations) are not planned.
    You do not set an indicator in the Cross-project field for the availability check. This means that only the individual segment (segment of the production lot) is checked during the availability check.
    Thanks,

Maybe you are looking for