Deployment and TLB
Dear All
Requirement : We run deployment using fair share rule "B" followed by TLB with truck capacity defined.
Since it deploys the stock based on the target stock levels and distributes it proportionally, sometimes we face problem when the stocks get deployed to destinations but not able to form an STO since it doesn't satisfy the TLB rule. This impacts, stock not to shipped and constraint in storage at location
Can it work as below??
1. Deploys based on fair share rule "B".
2. Tries to form a Truck ( TLB)
3. If truck not formed , then re deploy the stock based on other logic (say priority)
4. Then form a truck (TLB).
At least in this case.. STO's are formed for some destinations and stocks can be shipped out..
Pls provide your expert comment ...
Regards
Nav
Thanks Senthil
We did try with the first option.. Fair share rule "A", But if we deploy based on the demand of the destinations and other destinations with lower demand would be left over. Our business works more on serviceability.
with the second option, As per my understanding Push by distribution is when demand < supply, so that we can push the supply. In my case the demand > supply.
Fair share rule "B" is working fine and Deployment is carried out at SKU level and when a TLB is run it can collate all the SKU for the specific destinations and form a truck.
I would need to perform the steps as per my earlier post. Could you suggest any customized developlment required this??
Regards
Nav
Similar Messages
-
Deployment and TLB from DP BOM POS
Hello Masters of the Universe ......
I have a question ....i am using DP BOM ... after i have the demand for dependent products i am using a macro to calculate safety stock and net requirement ....
After i have the net requ calculated it will be necessary to create a purchase req or stock transfer req .... it is possible to create directly from the DP BOM área using the deployment and TLB?
I was trying to test but the system not allow to create a Planning Book with Deployment and TLB flags whem you are on a DP BOM POS but it is possible if i am using a SNP relevant POS.
Some one can help me please ?
Thank You ALLHi Geovana Juliani ,
Can u check whether materials/components you have use are create in APO as location-product master data and already assigned to model 000?
Check the date also.
Thanks,
Nikhil -
Consignment without Deployment and TLB
Hello ,
We currently have DP and PPDS implemented in our system , we are planning to have consignment scenario implemented where the customer sends in the forecast to APO DP .
1) How would the process be if we do not want to implement SNP,Deployment , TLB . Can we still go ahead and implement it . How would the process be . The help document says that once the TLB shipment is sent to ECC an Consignment order is created , but in our case we do not want to implement SNP , Deployement , TLB can we still be able to do it .
Regards,
NickThanks Senthil
We did try with the first option.. Fair share rule "A", But if we deploy based on the demand of the destinations and other destinations with lower demand would be left over. Our business works more on serviceability.
with the second option, As per my understanding Push by distribution is when demand < supply, so that we can push the supply. In my case the demand > supply.
Fair share rule "B" is working fine and Deployment is carried out at SKU level and when a TLB is run it can collate all the SKU for the specific destinations and form a truck.
I would need to perform the steps as per my earlier post. Could you suggest any customized developlment required this??
Regards
Nav -
I would like to start off by saying, that I'm a huge apple fan, even own 8 shares. I have everytihing apple, from multiple phones, two ipads, macbook air, macbook pro, time machine, and 2 apple tv's. So, I easliy have invested enough for a reponse. But, I'm really frustrated right now because I'm deployed and I would love nothing more than to be able to play my PS3 on my macbook pro. I know that this would be easily possible if mac devoted a week to a solution. Or maybe there is already software that would allow me to use my thunderbolt connection to HDMI to connect to my PS3. I have the hardware, all I need is a program that would reconize this. This would only help there sales, so I don't understand why you can't already do this. To be able to use your screen on your macbook pro as a TV for your game consoles would be a huge to boost sales. Please tell me if this is possible and what I need to do it? Or please tell me why this is not possible?
Welcome to Apple Support Communities
What you want is Target Display mode. This mode is only supported in Late 2009 and Mid 2010 27-inch iMacs, and Mid 2011 or newer iMacs, but MacBooks Pro are not supported, so you cannot use your MacBook as a display for your PlayStation 4.
In the case of Late 2009 and Mid 2010 27-inch iMacs, there is an adapter called Kanex XD which allows you to use the iMac as a display for a Xbox 360 or PlayStation 3, but Xbox One and PlayStation 4 are not supported. In other words, you need an external monitor for your PlayStation 4. -
Unable to Deploy and Run a WebDynPro Application in NWCE 7.1 DS
I have successfully built a test application in WebDynPro within the NWCE 7.1, but every time I try to deploy and run the application I get the following error:
No default system is configured in SAP System Registry [ERROR: Apr 24, 2008 10:32:51 AM /userOut/daView_category (eclipse.UserOutLocation) [Thread[Worker-19,5,main]] ]
It seems like a straightforward error, but when I go to the System Registry I cannot see how to set up a default system for the application. There is no "DefaultSystem" entry and so I am sure that I have to add one, but cannot find any documentation to help me do this.
Thanks.First, thanks for the fast responses.
I had gone to SAP AS JAVA preference before, but couldn't figure out how to get my system to show up in the dropdown box. When you put in the server name and the 0 instance, it then finds the system and all instances under the system. That was my missing link.
I can now deploy and run and move on to my next (inevitable) problem.
Thanks again. -
Error executing the Query after deploying and executing the application in WLS 6.1 SP3
Hi,
We are trying to run a application by deploying a war file on Web Logic Server
6.1 SP3. After deploying and at the time of execution of the application, the
server console displays this error message
java.sql.SQLException: ORA-00600: internal error code, arguments: [ttcgcshnd-1],
[0], [], [], [], [], [], []
While debugging thru the application we found that this error comes at the time
of execution of the query thru the Statement.executeQuery method of java.sql.Statement
class.
This same application when deployed on Web Logic Server 8.1 runs perfectly, without
any hitches.
Please, provide me the solution to this asap.Look for sometime around November. No exact date.
Eric
"Dominic Tulley" <[email protected]> wrote in message
news:[email protected]..
Thanks Eric,
you know what I'm going to ask next right?
Any ideas when SP4 comes out?
Cheers,
-Dominic
"Eric Gross" <[email protected]> wrote in message
news:[email protected]..
The next version of Apache that we will support will be 2.0.42/2.0.43
and
the module for that will be included in the next Service Pack for6.1(SP4)
and 7.0(SP2).
The problem with Apache 2 is that when a new release comes out a newmodule
needs to be compiled. Most of the time. For 2.0.42/2.0.43 this is notthe
case.
Regards,
Eric
"Dominic Tulley" <[email protected]> wrote in
message
news:3da3f246$[email protected]..
I'm trying to set this up (initially just apache in front of a single
WLS
server but ultimately I want to put it in front of a cluster).
I've installed Apache 2.0.40.
I've copied the mod_wl_20.so file into the apache modules folder.
I've edited the httpd.conf file and added the line:
LoadModule weblogic_module modules/mod_wl_20.so
When I run apache -t to check the configuration I get the following:
C:\Program Files\Apache Group\Apache2\bin>apache -t
Syntax error on line 173 of C:/Program Files/Apache
Group/Apache2/conf/httpd.conf:
Cannot load C:/Program Files/Apache Group/Apache2/modules/mod_wl_20.sointo
server: The specified procedure could not be found.
So what's going on here?
Looking at previous postings it sounds like there's an issue with
versions
of apache after 2.0.39 but I can't find a download for that version.Also,
it sounded like the issues were for WLS 7, not 6.1. Can this work
with
2.0.40 or am I wasting my time?
If I get the mod_wl_20.so from dev2dev I get the "incompatible plugin"
message that has been mentioned in this group already.
Any suggestions appreciated,
-Dominic -
I am currently deployed and was using my iMessage to be able to talk to family back in the states and my iMessage stopped working. It will no longer select my number to use as the send/receive. How do I fix this so I can continue to talk to family?
Read here:
http://support.apple.com/kb/TS2755 -
Windows 8.1 Deploy and Capture stops with no error
I have a standard deploy and capture TS for Windows 8.1 using the volume media 'install.wim' file.
The only modification I have made is to add a few applications into the TS.
Once started from WinPE, the TS goes smoothly, deploying the OS and the applications. It then restarts and just goes to the login prompt. The TS doesn't continue as expected, rebooting to WinPE and running the capture.
I've checked the smsts.log file and I cant see any obvious errors or anything that could cause this behaviour. The only warning I can see is 'Active reqeust handle is empty, registering with new active request handle' though I'm not sure if this is even
related.
So the process I see is:
Boot to PXE WinPE
Select build and capture TS for windows 8.1
Install OS
Install Apps
Restart
Login screen
Anyone have any ideas?
SCCM 2012 R2
Windows 8.1 ProfessionalFound the solution.
Was due to one of the apps I was installing requiring .NET 3.5. -
How to deploy and run EJB in eclipse without XDoclet
Hi Friends
I am new in j2ee.In my academic project i want to do some ejb programming.
For that purpose i want to write some ejb's.I have written all required class for ejb,created ejb-jar.xml file manually,weblogic .xml file manually. I am using weblogic8 as an server for deployment.
I know deployment with xdoclet but i want to know hoe to deploy ejb without xdoclet.
If u have saple code or useful link regarding this please send it as soon as possible.
Thanks in advance
How to deploy and run EJB in eclipse without XDocletHI Welcome to J2ee...
I am also new to this...But i ll share my ideas with you...
In EJB 3.0 No need of any Deployment Descriptors....
And If you are using Eclipse You can Deploy(as jar) using Export in File tab...
XDoclet is not mandatory...
Gopal V -
How to deploy and debug Central Office 13.0.1 Application in Oracle AS
Hi,
Can anybody please explain me how to deploy and debug Central Office 13.0.1 / 13.1.1 Application in Oracle Application Server via Ecllipse IDE.
Please explain this:
1. Run the Oracle Application Server in debug mode from Ecllipse IDE.
2. Deploy the Central Office 13.0.1 into Application Server from Ecllipse IDE and able to debug the code.
3. Restart the Oracle Application Server in debug mode from Ecllipse IDE.
Thanks
SRRI got the solution
-
Deployment and debugging from JBuilder
Hi,
i build a JATO application that deployed as a war file and run
perfectly on an external Tomcat.
But running this app on the integrated Tomcat of the JBuilder tool
results in the following error :
Application Error - javax.servlet.ServletException: Invalid reqest -
request handler "Login" not found
On that way, debugging the application is not possible.
Any idea what's wrong ?
I've heard there is a deployment tool document ? Where is it ?
thanks for your helpHi--
None of our team has experience running JATO apps in JBuilder. The main
thing to check when running in an IDE is that the web.xml is properly
registered. Because you've received a JATO error, I assume it is in your
case. Therefore, it must be something else.
The error you sent means that the lookup for the LoginViewBean class failed.
This is probably a silly question, but are all of your classes compiled and
under the /WEB-INF/classes directory? Any other reason your application
classes might not be found?
Todd
Todd Fast
Senior Engineer
Sun Microsystems, Inc.
todd.fast@s...
----- Original Message -----
From: <donnetmonay@y...>
Sent: Tuesday, November 20, 2001 1:26 AM
Subject: [iPlanet-JATO] deployment and debugging from JBuilder
Hi,
i build a JATO application that deployed as a war file and run
perfectly on an external Tomcat.
But running this app on the integrated Tomcat of the JBuilder tool
results in the following error :
Application Error - javax.servlet.ServletException: Invalid reqest -
request handler "Login" not found
On that way, debugging the application is not possible.
Any idea what's wrong ?
I've heard there is a deployment tool document ? Where is it ?
thanks for your help
For more information about JATO, please visit:
http://developer.iplanet.com/tech/appserver/framework/index.jsp -
Hello all,
I have a multi-tenant environment in SharePoint 2010 server. Different tenants are hosted by one web app.
One content source has been created to crawl the all shared environment. (the only URL added in the content source settings = URL of the
web app)
Crawl everything under the hostname for each start address has been selected when creating this content source.
Now I have created a new tenant hosted by the same web app. For this new tenant I want to have a different crawl schedule. Simple , I just create a new content source and add the host URL of this tenant. With the same settings has the other content source.
After having started a full crawl I get 0 success and 1 warning : “This URL is part of a host header SharePoint deployment and the search application is not configured to crawl
individual host header sites. This will be crawled as a part of the host header Web application if configured as a start address.”
The first content source is well crawling the new tenant freshly created. Could you tell me where I’m wrong?
Thanks in advance
Regards
BaldoBaldo,
In the configuration that you described you now have 2 content sources set to crawl the same content. If you have a content source with a start address of http://servername/ then it is going to crawl everything past that address. If you are now changing
the crawl schedule based on the individual site collections, you will need to move your start addresses further down the URL.
For Example:
1st Content Source:
http://servername/ as a start address would now become
http://servername/site1
http://servername/site2
2nd Content Source:
http://servername/site3
Also remember that all crawling must happen on the default zone. If you are trying to crawl a zone that the web application has been extended into, that will not work.
ScottC - Microsoft SharePoint Support -
So we just got a new Macbook and I also installed the apple configurator tool. I'm using it to prepare the iPads for deployment and it won't let me prepare them? It gets an error stating "retrieving iOS info from apple" then it stops and says "internet error". My Internet connection is fine with the Mac-book. It shows the iPad is listed under the Prepare logo up top as 1 but under supervise none are shown. Although it does show itself in iTunes. Also the profile I created is fresh and has no errors. We have tryed nearly everything I cna think of and online forums are not giving us to much info on this error.
A wag at this. A port issue?
"Apple Push Notification network setup
When MDM servers and iOS devices are behind a firewall, some network configuration may need to take place in order for the MDM service to function properly. To send notifications from an MDM server to Apple Push Notification service, TCP port 2195 needs to be open. To reach the feedback service, TCP port 2196 will need to be open as well. For devices connecting to the push service over Wi-Fi, TCP port 5223 should
be open."
http://www.google.com/url?sa=t&rct=j&q=ports%20ios%20configure%20ipad&source=web &cd=1&ved=0CC0QFjAA&url=http%3A%2F%2Fimages.apple.com%2Fipad%2Fbusiness%2Fdocs%2 FiOS_MDM.pdf&ei=5lXGUPCcJMXx0gH2wYG4BA&usg=AFQjCNFzINvs7ktT-6o6Q_l4Qk2HkpjtCA&ca d=rja
google: ports ios configure ipad
Try it on your home network where there isn't a lot of 'controls' -- network filtering , firewalls, etc.
Robert -
Can Apple Configurator deploy and modify Apple TV iOS 6.0 settings? For instance, what if I wanted to submit a 'reset all settings' command, but not a 'factory restore'?
Did you follow the instructions here:
http://support.apple.com/kb/HT4367
Pay attention to differences in power connection depending on whether or not you have AppleTV2 or AppleTV 3.
Also some microUSB leads don't seem to work - try another if you can. Disconnect superfluous USB device/hubs too if possible.
AC -
How to deploy and configure custom JAAS login module
Dear Experts,
I have created a custom jaas login module, In my .jar I am having
1. MyLoginModule.class
2. Handler.class
3. MyPrincipal.class
I want to know how to deploy the custom jaas module to oc4j. And make available to all
other application to use the same for authentication & authorization. Please suggest me.
Thanks,
Rajesh AThis article does not mention that you can put the <jazn-loginconfig> tag into the orion-application.xml as well.
Much easier to deploy and test.
--olaf
Maybe you are looking for
-
Difference between GR/IR trade and GR/IR non trade GL account
Hello, can anyone let me know what is the difference between GR/IR trade and GR/IR non trade GL accounts and how are they automatically determined during a GR or IR? Thanks, Edited by: sapuser3 on Jul 17, 2009 2:57 PM
-
Unable to View pdf Output File Created by XML Publisher
Hello All, i have created a report in xml publisher then registered it thru concurrent program.But when i am trying to see the output ,it gives me output in xml form instead of giving in pdf format. Report is completing with warning and log file deta
-
InDesign to PDF - Keeping Paper color/ BG color transfer
Hello, I'm working on a "Yellow pages" project, where i have changed the "paper" color to a canary yellow, as is going to printed. Is there a way to keep that color when exporting to PDF, so that the background/ paper color remains or transfers to th
-
HT1212 My screen is not working
I can not enter my passcode nor turn my phone off to back up my phone. I am getting a new iPhone and i need to back my current one right now, but iTunes is not letting me due to my passcode. Since my screen is not working, how can I back up my accoun
-
Now before my old Nexus 7 died I had an older version of PS Touch for it, and found my back up of the apk and it works just fine on my Note 3... Is there any way I can purchase the latest version and install it outside of the play store onto my Note