Deployment error when the server is configured for debugging

Hi,
I am using NW 2004s, when I configure one of server nodes to enable debugging (in config tool I check three checkboxes - debuggable, enabled debug mode, restricted load balance) the deployment is failed with the following error:
[006]Deployment aborted
Settings
SDM host : main-jr-ep7t
SDM port : 50018
URL to deploy : file:/C:/DOCUME1/olesyab/LOCALS1/Temp/temp54994ClassActionLoad.ear
Result
=> deployment aborted : file:/C:/DOCUME1/olesyab/LOCALS1/Temp/temp54994ClassActionLoad.ear
Aborted: development component 'ClassActionLoad'/'local'/'LOKAL'/'0.2007.12.10.15.11.59'/'0':
Caught exception while checking the login credentials for SAP J2EE Engine. Check whether the SAP J2EE Engine is up and running.
com.sap.engine.deploy.manager.DeployManagerException: ERROR: Cannot connect to Host: [main-jr-ep7t] with user name: [Administrator]                     Check your login information.                     Exception is: com.sap.engine.services.jndi.persistent.exceptions.NamingException: Exception during getInitialContext operation. No server is running. [Root exception is com.sap.engine.services.security.exceptions.BaseLoginException: Exception in creating new RemoteLoginContext instance.]
     at com.sap.engine.services.jndi.InitialContextFactoryImpl.handleConnectionPropblem(InitialContextFactoryImpl.java:494)
     at com.sap.engine.services.jndi.InitialContextFactoryImpl.getInitialContext(InitialContextFactoryImpl.java:363)
     at javax.naming.spi.NamingManager.getInitialContext(NamingManager.java:662)
     at javax.naming.InitialContext.getDefaultInitCtx(InitialContext.java:243)
     at javax.naming.InitialContext.init(InitialContext.java:219)
     at javax.naming.InitialContext.<init>(InitialContext.java:195)
     at com.sap.engine.deploy.manager.DeployManagerImpl.checkCredentials(DeployManagerImpl.java:2983)
     at com.sap.sdm.serverext.servertype.inqmy.extern.DeployManagerAuthMethodInvoker.invokeCheckCredentialsInternal(DeployManagerAuthMethodInvoker.java:51)
     at com.sap.sdm.serverext.servertype.inqmy.extern.ExternalMethodInvoker.invokeCheckCredentials(ExternalMethodInvoker.java:45)
     at com.sap.sdm.serverext.servertype.inqmy.extern.ExternalMethodInvoker.invokeCheckCredentials(ExternalMethodInvoker.java:32)
     at com.sap.sdm.serverext.servertype.inqmy.extern.EngineOnlineDeployerImpl.checkLoginCredentials(EngineOnlineDeployerImpl.java:173)
     at com.sap.sdm.serverext.servertype.inqmy.extern.EngineApplOnlineDeployerImpl.performDeployment(EngineApplOnlineDeployerImpl.java:168)
     at com.sap.sdm.serverext.servertype.inqmy.extern.EngineDeployerImpl.deploy(EngineDeployerImpl.java:96)
     at com.sap.sdm.serverext.servertype.inqmy.EngineProcessor.executeAction(EngineProcessor.java:224)
     at com.sap.sdm.app.proc.deployment.impl.PhysicalDeploymentActionExecutor.execute(PhysicalDeploymentActionExecutor.java:60)
     at com.sap.sdm.app.proc.deployment.impl.DeploymentActionImpl.execute(DeploymentActionImpl.java:186)
     at com.sap.sdm.app.proc.deployment.controllers.internal.impl.DeploymentExecutorImpl.execute(DeploymentExecutorImpl.java:48)
     at com.sap.sdm.app.proc.deployment.states.eventhandler.ExecuteDeploymentHandler.executeAction(ExecuteDeploymentHandler.java:83)
     at com.sap.sdm.app.proc.deployment.states.eventhandler.ExecuteDeploymentHandler.handleEvent(ExecuteDeploymentHandler.java:60)
     at com.sap.sdm.app.proc.deployment.states.StateBeforeNextDeployment.processEvent(StateBeforeNextDeployment.java:127)
     at com.sap.sdm.app.proc.deployment.states.InstContext.processEventServerSide(InstContext.java:73)
     at com.sap.sdm.app.proc.deployment.states.InstContext.processEvent(InstContext.java:59)
     at com.sap.sdm.app.sequential.deployment.impl.DeployerImpl.doPhysicalDeployment(DeployerImpl.java:128)
     at com.sap.sdm.app.sequential.deployment.impl.DeployerImpl.deploy(DeployerImpl.java:97)
     at com.sap.sdm.app.sequential.deployment.impl.DeployerImpl.deploy(DeployerImpl.java:68)
     at com.sap.sdm.apiimpl.local.DeployProcessorImpl.deploy(DeployProcessorImpl.java:74)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:324)
     at com.sap.sdm.is.cs.remoteproxy.server.impl.RemoteProxyServerImpl.requestRemoteCall(RemoteProxyServerImpl.java:127)
     at com.sap.sdm.is.cs.remoteproxy.server.impl.RemoteProxyServerImpl.process(RemoteProxyServerImpl.java:38)
     at com.sap.sdm.apiimpl.remote.server.ApiClientRoleCmdProcessor.process(ApiClientRoleCmdProcessor.java:84)
     at com.sap.sdm.is.cs.session.server.SessionCmdProcessor.process(SessionCmdProcessor.java:67)
     at com.sap.sdm.is.cs.cmd.server.CmdServer.execCommand(CmdServer.java:76)
     at com.sap.sdm.client_server.launch.ServerLauncher$ConnectionHandlerImpl.handle(ServerLauncher.java:286)
     at com.sap.sdm.is.cs.ncserver.NetCommServer.serve(NetCommServer.java:43)
     at com.sap.sdm.is.cs.ncwrapper.impl.ServiceWrapper.serve(ServiceWrapper.java:39)
     at com.sap.bc.cts.tp.net.Worker.run(Worker.java:50)
     at java.lang.Thread.run(Thread.java:534)
Caused by: com.sap.engine.services.security.exceptions.BaseLoginException: Exception in creating new RemoteLoginContext instance.
     at com.sap.engine.services.security.remote.login.RemoteLoginContextExt.<init>(RemoteLoginContextExt.java:34)
     at com.sap.engine.services.jndi.implclient.LoginHelper.clientSideLogin(LoginHelper.java:81)
     at com.sap.engine.services.jndi.InitialContextFactoryImpl.getInitialContext(InitialContextFactoryImpl.java:355)
     ... 38 more
Caused by: com.sap.engine.services.rmi_p4.P4ConnectionException: Possible problem: no available running server node. Check your running servers.
     at com.sap.engine.services.rmi_p4.P4ObjectBrokerClientImpl.getException(P4ObjectBrokerClientImpl.java:701)
     at com.sap.engine.services.rmi_p4.P4ObjectBrokerClientImpl.getException(P4ObjectBrokerClientImpl.java:689)
     at com.sap.engine.services.rmi_p4.Parser.newRequest(Parser.java:180)
     at com.sap.engine.services.rmi_p4.Connection.run(Connection.java:424)
     ... 1 more
(message ID: com.sap.sdm.serverext.servertype.inqmy.extern.EngineApplOnlineDeployerImpl.checkLoginCredentials.DMEXC)
Deployment exception : The deployment of at least one item aborted
If I uncheck debug options everything is ok and the deployment is finished successfully.
Can anyone help with this problem?
Thanks,
Olesya

Similar Messages

Error when the link is clicked for detail page

Hello I am creating pages using MySql and PHP with dream weaver. I created my master record set and detail page. the master record set works b but when you click the link to bring up the details page I get this error
"You have an error in your SQL syntax; check the manual that corresponds to your MySQL server version for the right syntax to use near 'name = 'Brandon' LIMIT 0, 10' at line 1"
Any help with guidance on trouble shooting error would be greatly appreciated.
David

=====================================================Master page=============================================================
<?php require_once('Connections/Onantional.php'); ?>
<?php
if (!function_exists("GetSQLValueString")) {
function GetSQLValueString($theValue, $theType, $theDefinedValue = "", $theNotDefinedValue = "")
$theValue = get_magic_quotes_gpc() ? stripslashes($theValue) : $theValue;
$theValue = function_exists("mysql_real_escape_string") ? mysql_real_escape_string($theValue) : mysql_escape_string($theValue);
switch ($theType) {
    case "text":
      $theValue = ($theValue != "") ? "'" . $theValue . "'" : "NULL";
      break;
    case "long":
    case "int":
      $theValue = ($theValue != "") ? intval($theValue) : "NULL";
      break;
    case "double":
      $theValue = ($theValue != "") ? "'" . doubleval($theValue) . "'" : "NULL";
      break;
    case "date":
      $theValue = ($theValue != "") ? "'" . $theValue . "'" : "NULL";
      break;
    case "defined":
      $theValue = ($theValue != "") ? $theDefinedValue : $theNotDefinedValue;
      break;
return $theValue;
$currentPage = $_SERVER["PHP_SELF"];
$maxRows_Recordset1 = 10;
$pageNum_Recordset1 = 0;
if (isset($_GET['pageNum_Recordset1'])) {
$pageNum_Recordset1 = $_GET['pageNum_Recordset1'];
$startRow_Recordset1 = $pageNum_Recordset1 * $maxRows_Recordset1;
mysql_select_db($database_Onantional, $Onantional);
$query_Recordset1 = "SELECT * FROM Roster";
$query_limit_Recordset1 = sprintf("%s LIMIT %d, %d", $query_Recordset1, $startRow_Recordset1, $maxRows_Recordset1);
$Recordset1 = mysql_query($query_limit_Recordset1, $Onantional) or die(mysql_error());
$row_Recordset1 = mysql_fetch_assoc($Recordset1);
if (isset($_GET['totalRows_Recordset1'])) {
$totalRows_Recordset1 = $_GET['totalRows_Recordset1'];
} else {
$all_Recordset1 = mysql_query($query_Recordset1);
$totalRows_Recordset1 = mysql_num_rows($all_Recordset1);
$totalPages_Recordset1 = ceil($totalRows_Recordset1/$maxRows_Recordset1)-1;
$queryString_Recordset1 = "";
if (!empty($_SERVER['QUERY_STRING'])) {
$params = explode("&", $_SERVER['QUERY_STRING']);
$newParams = array();
foreach ($params as $param) {
    if (stristr($param, "pageNum_Recordset1") == false &&
        stristr($param, "totalRows_Recordset1") == false) {
      array_push($newParams, $param);
if (count($newParams) != 0) {
    $queryString_Recordset1 = "&" . htmlentities(implode("&", $newParams));
$queryString_Recordset1 = sprintf("&totalRows_Recordset1=%d%s", $totalRows_Recordset1, $queryString_Recordset1);
?><!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
<title>Untitled Document</title>
</head>
<body>
<table border="1" align="center">
<tr>
    <td>First name</td>
    <td>Last Name</td>
    <td>Conference</td>
    <td>email</td>
</tr>
<?php do { ?>
    <tr>
      <td><a href="details.php?recordID=<?php echo $row_Recordset1['First name']; ?>"> <?php echo $row_Recordset1['First name']; ?> </a> </td>
      <td><?php echo $row_Recordset1['Last Name']; ?> </td>
      <td><?php echo $row_Recordset1['Conference']; ?> </td>
      <td><?php echo $row_Recordset1['email']; ?> </td>
    </tr>
    <?php } while ($row_Recordset1 = mysql_fetch_assoc($Recordset1)); ?>
</table>
<br />
<table border="0">
<tr>
    <td><?php if ($pageNum_Recordset1 > 0) { // Show if not first page ?>
          <a href="<?php printf("%s?pageNum_Recordset1=%d%s", $currentPage, 0, $queryString_Recordset1); ?>">First</a>
          <?php } // Show if not first page ?>
    </td>
    <td><?php if ($pageNum_Recordset1 > 0) { // Show if not first page ?>
          <a href="<?php printf("%s?pageNum_Recordset1=%d%s", $currentPage, max(0, $pageNum_Recordset1 - 1), $queryString_Recordset1); ?>">Previous</a>
          <?php } // Show if not first page ?>
    </td>
    <td><?php if ($pageNum_Recordset1 < $totalPages_Recordset1) { // Show if not last page ?>
          <a href="<?php printf("%s?pageNum_Recordset1=%d%s", $currentPage, min($totalPages_Recordset1, $pageNum_Recordset1 + 1), $queryString_Recordset1); ?>">Next</a>
          <?php } // Show if not last page ?>
    </td>
    <td><?php if ($pageNum_Recordset1 < $totalPages_Recordset1) { // Show if not last page ?>
          <a href="<?php printf("%s?pageNum_Recordset1=%d%s", $currentPage, $totalPages_Recordset1, $queryString_Recordset1); ?>">Last</a>
          <?php } // Show if not last page ?>
    </td>
</tr>
</table>
Records <?php echo ($startRow_Recordset1 + 1) ?> to <?php echo min($startRow_Recordset1 + $maxRows_Recordset1, $totalRows_Recordset1) ?> of <?php echo $totalRows_Recordset1 ?>
</body>
</html>
<?php
mysql_free_result($Recordset1);
?>
=====================================================end master ========================================================
========================================================details page=========================================================
<?php require_once('Connections/Onantional.php'); ?><?php
if (!function_exists("GetSQLValueString")) {
function GetSQLValueString($theValue, $theType, $theDefinedValue = "", $theNotDefinedValue = "")
$theValue = get_magic_quotes_gpc() ? stripslashes($theValue) : $theValue;
$theValue = function_exists("mysql_real_escape_string") ? mysql_real_escape_string($theValue) : mysql_escape_string($theValue);
switch ($theType) {
    case "text":
      $theValue = ($theValue != "") ? "'" . $theValue . "'" : "NULL";
      break;
    case "long":
    case "int":
      $theValue = ($theValue != "") ? intval($theValue) : "NULL";
      break;
    case "double":
      $theValue = ($theValue != "") ? "'" . doubleval($theValue) . "'" : "NULL";
      break;
    case "date":
      $theValue = ($theValue != "") ? "'" . $theValue . "'" : "NULL";
      break;
    case "defined":
      $theValue = ($theValue != "") ? $theDefinedValue : $theNotDefinedValue;
      break;
return $theValue;
$maxRows_DetailRS1 = 10;
$pageNum_DetailRS1 = 0;
if (isset($_GET['pageNum_DetailRS1'])) {
$pageNum_DetailRS1 = $_GET['pageNum_DetailRS1'];
$startRow_DetailRS1 = $pageNum_DetailRS1 * $maxRows_DetailRS1;
$colname_DetailRS1 = "-1";
if (isset($_GET['recordID'])) {
$colname_DetailRS1 = $_GET['recordID'];
mysql_select_db($database_Onantional, $Onantional);
$query_DetailRS1 = sprintf("SELECT * FROM Roster WHERE First name = %s", GetSQLValueString($colname_DetailRS1, "text"));
$query_limit_DetailRS1 = sprintf("%s LIMIT %d, %d", $query_DetailRS1, $startRow_DetailRS1, $maxRows_DetailRS1);
$DetailRS1 = mysql_query($query_limit_DetailRS1, $Onantional) or die(mysql_error());
$row_DetailRS1 = mysql_fetch_assoc($DetailRS1);
if (isset($_GET['totalRows_DetailRS1'])) {
$totalRows_DetailRS1 = $_GET['totalRows_DetailRS1'];
} else {
$all_DetailRS1 = mysql_query($query_DetailRS1);
$totalRows_DetailRS1 = mysql_num_rows($all_DetailRS1);
$totalPages_DetailRS1 = ceil($totalRows_DetailRS1/$maxRows_DetailRS1)-1;
?><!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=utf-8" />
<title>Untitled Document</title>
</head>
<body>
<table border="1" align="center">
<tr>
    <td>First name</td>
    <td><?php echo $row_DetailRS1['First name']; ?> </td>
</tr>
<tr>
    <td>Last Name</td>
    <td><?php echo $row_DetailRS1['Last Name']; ?> </td>
</tr>
<tr>
    <td>Conference</td>
    <td><?php echo $row_DetailRS1['Conference']; ?> </td>
</tr>
<tr>
    <td>email</td>
    <td><?php echo $row_DetailRS1['email']; ?> </td>
</tr>
</table>
</body>
</html><?php
mysql_free_result($DetailRS1);
?>

How to show an error Page in Weblogic when the server is down

Hi ,
I heard that every container has the facility to show an error page when the server is down and (when the request has arrived at that time ).
Please tell me how to configure this in BEA weblogic ??
Thanks .

Hi,
From my understanding weblogic dose not provide the thing which you are asking for, reason is given below.
- An application is deployed only on managed server one (MS-1)
- Now if the request comes to the server (MS-1) when it was running and then for some reason MS-1 goes down then weblogic server would be able to send any response back to the client as its down.
- Hence nothing can be done as the request object is been lost when the server goes down or even cant redirect to an error page as for doing that too the server has to be up and running.
However there are other way round which can help you overcome this issue as shown below
- Use Clusters with few managed servers in it which gives you high availability and load-balancing.
- Use any web servers like Apache in front of weblogic servers.
Using the above things you can also use customized HTTP Error Responses with error-page element in web.xml and create your own error pages which can be re-directed for the web server side also. For more information go through the below links
Topic: Customizing HTTP Error Responses
http://download.oracle.com/docs/cd/E13222_01/wls/docs92/webapp/configurejsp.html#wp157884
Topic: error-page
http://download.oracle.com/docs/cd/E13222_01/wls/docs81/webapp/web_xml.html#1017571
Topic: ErrorPage
http://download.oracle.com/docs/cd/E12840_01/wls/docs103/plugins/plugin_params.html#wp1155425
Hope above information helps you.
Regards,
Ravish

The e-mail message could not be sent. Make sure the outgoing e-mail settings for the server are configured correctly

I have a 2 server SharePoint farm.
All outgoing emails were working fine.
I just restarted both servers and now after that none of the emails are being sent. I am using OOB publishing workflow and it shows message:
The e-mail message could not be sent. Make sure the outgoing e-mail settings for the server are configured correctly.
Even if I setup Alert on some list, it doesn't send email.
I have checked that outgoing email setting in CA is defined and like I said it was working fine without problems but after restart it is showing error.
What could be the cause of this and how to fix it?
EDIT
I removed outgoing mail server in CA, added again and restart IIS but still emails from OOB workflow is not being sent. But email from Alerts are being sent. Don't know what to do now.

This is really weird, It works when an alert is set but workflows doesn't send emails... Can you create a simple 1 Step workflow in SPD to send an email when a specific field is set. See if this sends an email..
AJ MCTS: SP 2010 Configuration MCSA: Windows 7 If you find this post useful kindly please mark it as an answer :) TY
I created a test workflow which sends email to user and it is also not sending email. But I am getting email from SharePoint regarding "variation" page changes as well as alerts which I told above.

12c agent install fails with error - The plug-in configuration for the oracle.sysman.oh monitoring plug-in may have failed

Hi,
I am trying to install 12c agent on windows 7 64 bit server by following m.note .
It is failing with Agent Configuration failed, please see below error message.
INFO: length of temp is2
INFO: Return value:C:\/Oracle/12.1.0.3.0_AgentCore_233/core
INFO: ** Agent Port Check completed successfully.**
INFO: ERROR: The Management Agent configuration failed. The plug-in configuration for the oracle.sysman.oh monitoring plug-in may have failed, or this plug-in may not be present in the Management Agent software. Ensure that the Management Agent software has the oracle.sysman.oh monitoring plug-in, if not then retry the operation. If the agent software has the oracle.sysman.oh monitoring plug-in, view the plug-in deployment log C:\Oracle\12.1.0.3.0_AgentCore_233\core\install\logs to check if the plug-in configuration for the oracle.sysman.oh monitoring plug-in failed.
INFO:
INFO: perform - mode finished for action: configure
INFO:
INFO: You can see the log file: C:\Oracle\12.1.0.3.0_AgentCore_233\core\12.1.0.3.0\cfgtoollogs\oui\configActions2014-10-03_08-48-15-AM.log
INFO:
INFO: C:\Oracle\12.1.0.3.0_AgentCore_233>exit /b 3
INFO: Plugin homes:
INFO: Plugin homes:
INFO: C:\Oracle\12.1.0.3.0_AgentCore_233\core\12.1.0.3.0\oui\bin\runConfig.bat ORACLE_HOME=C:\Oracle\12.1.0.3.0_AgentCore_233\core\12.1.0.3.0 RESPONSE_FILE=C:\Oracle\12.1.0.3.0_AgentCore_233\core\12.1.0.3.0\agent.rsp ACTION=configure MODE=perform COMPONENT_XML={oracle.sysman.top.agent.11_1_0_1_0.xml} RERUN=true completed with status=3
SEVERE: ERROR: Agent Configuration Failed
Thanks,

Looks like , J2EE is having a problem connecting to the DB.Pls. chk. the following
-If you have configured the loop-back adapter , if installing on a local system & updated the /etc/host file with your ip address and host name.
or if the system is part of some n/w group and has ip address assigned ?
-Jdk 1.4 version is installed in your system
-Enough free Disk space available in the system
-How much RAM your system has which windows version you are using ?
-Is the DB is coming up properly ? its error related to this. check the logs.
-If the ports used by sap install / run used by other services running on the system ? & user have admin. privileges on the system .
Pls. update with your findings on above same , for the step next ...
Thanks ,
Uppal

The email message cannot be sent. Make sure the outgoing email settings for the server are configured properly

i have an issue when loading a workflow. it gives me a following error "The email message cannot be sent. Make sure the outgoing email settings for the server are configured properly". it doesnt send me any alerts and worlflow fails at the end
with the above error message.

Hi,
I agree with Bistesh. But after Outgoing e-mail settings are configured properly, if the issue still exists,
It may result from your Anti-Virus. Please refer to the following steps:
Open MCAfee Console and go to Access Protection window.
Click Anti-Virus Standard Protection and edit “prevent mass mailing
worms from sending emails” rule.
Now we need to know which processes are being blocked therefore we need to check the MCAfee Log located at
C:\Documents and Settings\All Users\Application Data\McAfee\DesktopProtection\AccessProtectionLog.txt
you may find entries of DtExec , DtExecUI and DatabaseMail90, now these processes need to be entered in the exclusion list of selected rule .
Reset the IIS And SharePoint Timer service to check if this works for you.
Here are some similar issues with you, you can use as a reference:
http://social.technet.microsoft.com/Forums/en-US/667f0d61-4914-43fa-80c1-8cf430b113bb/workflow-email-not-working-but-normal-email-alerts-working-fine?forum=sharepointgeneralprevious
http://techsuite.wordpress.com/2008/12/08/workflow-history-the-email-message-cannot-be-sent-make-sure-the-outgoing-email-settings-for-the-server-are-configured-properly/
Best Regards,
Lisa chen

Deployment Error when transporting to TEST server

Hi experts,
I'm having a deployment error when transporting my dc from development server to test server using the Change Management Service - Transport Studio.
In the error message, there is the mention of the following sentence:
=============================================
Check causing exception for details (trace file). Hint: Are all referenced components deployed and available on the engine ?
=============================================
But the dc is using only the standard default dcs like:
com.sap.aii.proxy.framework (default)
com.sap.aii.util.misc (default)
com.sap.exception (default)
com.sap.mw.jco (default)
tc/cmi (default)
tc/ddic/ddicruntime (default)
td/ddic/metamodel/content (default)
tc/logging (default)
tc/wd/webdynpro (default)
tc/wdp/metamodel/content (default)
So could these dcs not have been deployed on the test server ?
How do we confirm this ?
Thanks in advance.
Rgds,
Daniel

A dump of the exception i m getting.
Anyone has a clue or advice of how to overcome this problem ?
20081107165952 Info   :Nov 7, 2008 4:46:03 PM   Info: Starting: Update: Selected development component 'appl/main'/'com.diagonal'/'dev_devcias_C'/'823'/'0' updates currently deployed development component 'appl/main'/'com.diagonal'/'LOKAL'/'0.2006.01.12.14.18.23'/'0'.
20081107165952 Info   :Nov 7, 2008 4:46:03 PM   Info: SDA to be deployed: /usr/sap/WS5/JC00/SDM/root/origin/com.diagonal/appl/main/dev_devcias_C/0/823/appl~main.sda
20081107165952 Info   :Nov 7, 2008 4:46:03 PM   Info: Software type of SDA: J2EE
20081107165952 Info   :Nov 7, 2008 4:46:03 PM   Info: ***** Begin of SAP J2EE Engine Deployment (J2EE Application) *****
20081107165952 Info   :Nov 7, 2008 4:46:07 PM   Info: Begin of log messages of the target system:
20081107165952 Info   :08/11/07 16:46:03 - ***********************************************************
20081107165952 Info   :08/11/07 16:46:04 - Start updating EAR file...
20081107165952 Info   :08/11/07 16:46:04 - start-up mode is lazy
20081107165952 Info   :08/11/07 16:46:04 - EAR file updated successfully for 70ms.
20081107165952 Info   :08/11/07 16:46:04 - Start updating...
20081107165952 Info   :08/11/07 16:46:06 - EAR file uploaded to server for 861ms.
20081107165952 Info   :08/11/07 16:46:07 - ERROR: Not updated. Deploy Service returned ERROR:
20081107165952 Info   :                     java.rmi.RemoteException: Cannot deploy application com.diagonal/appl~main..
20081107165952 Info   :                     Reason: Clusterwide exception: Failed to deploy application com.diagonal/appl~main. Check causing exception for details (trace file). Hint: Are all referenced components deployed and available on the engine?; nested exception is:
20081107165952 Info   :                          com.sap.engine.services.deploy.container.DeploymentException: Clusterwide exception: Failed to deploy application com.diagonal/appl~main. Check causing exception for details (trace file). Hint: Are all referenced components deployed and available on the engine?
20081107165952 Info   :                          at com.sap.engine.services.deploy.server.DeployServiceImpl.update(DeployServiceImpl.java:681)
20081107165952 Info   :                          at com.sap.engine.services.deploy.server.DeployServiceImplp4_Skel.dispatch(DeployServiceImplp4_Skel.java:1278)
20081107165952 Info   :                          at com.sap.engine.services.rmi_p4.DispatchImpl._runInternal(DispatchImpl.java:313)
20081107165952 Info   :                          at com.sap.engine.services.rmi_p4.DispatchImpl._run(DispatchImpl.java:199)
20081107165952 Info   :                          at com.sap.engine.services.rmi_p4.server.P4SessionProcessor.request(P4SessionProcessor.java:136)
20081107165952 Info   :                          at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
20081107165952 Info   :                          at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
20081107165952 Info   :                          at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
20081107165952 Info   :                          at java.security.AccessController.doPrivileged(AccessController.java:215)
20081107165952 Info   :                          at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
20081107165952 Info   :                          at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
20081107165952 Info   :                     Caused by: com.sap.engine.services.deploy.container.DeploymentException: Clusterwide exception: Failed to deploy application com.diagonal/appl~main. Check causing exception for details (trace file). Hint: Are all referenced components deployed and available on the engine?
20081107165952 Info   :                          at com.sap.engine.services.webdynpro.WebDynproContainer.deploy(WebDynproContainer.java:1050)
20081107165952 Info   :                          at com.sap.engine.services.webdynpro.WebDynproContainer.makeUpdate(WebDynproContainer.java:1281)
20081107165952 Info   :                          at com.sap.engine.services.deploy.server.application.UpdateTransaction.makeComponents(UpdateTransaction.java:400)
20081107165952 Info   :                          at com.sap.engine.services.deploy.server.application.DeployUtilTransaction.commonBegin(DeployUtilTransaction.java:321)
20081107165952 Info   :                          at com.sap.engine.services.deploy.server.application.UpdateTransaction.begin(UpdateTransaction.java:164)
20081107165952 Info   :                          at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesOnOneServer(ApplicationTransaction.java:292)
20081107165952 Info   :                          at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhases(ApplicationTransaction.java:326)
20081107165952 Info   :                          at com.sap.engine.services.deploy.server.DeployServiceImpl.makeGlobalTransaction(DeployServiceImpl.java:3184)
20081107165952 Info   :                          at com.sap.engine.services.deploy.server.DeployServiceImpl.update(DeployServiceImpl.java:669)
20081107165952 Info   :                          ... 10 more
20081107165952 Info   :                     For detailed information see the log file of the Deploy Service.
20081107165952 Info   :08/11/07 16:46:07 - ***********************************************************
20081107165952 Info   :Nov 7, 2008 4:46:07 PM   Info: End of log messages of the target system.
20081107165952 Info   :Nov 7, 2008 4:46:07 PM   Info: ***** End of SAP J2EE Engine Deployment (J2EE Application) *****
20081107165952 Info   :Nov 7, 2008 4:46:07 PM   Error: Aborted: development component 'appl/main'/'com.diagonal'/'dev_devcias_C'/'823'/'0', grouped by :
20081107165952 Info   :Caught exception during application deployment from SAP J2EE Engine's deploy service:
20081107165952 Info   :java.rmi.RemoteException: Cannot deploy application com.diagonal/appl~main..
20081107165952 Info   :Reason: Clusterwide exception: Failed to deploy application com.diagonal/appl~main. Check causing exception for details (trace file). Hint: Are all referenced components deployed and available on the engine?; nested exception is:
20081107165952 Info   :     com.sap.engine.services.deploy.container.DeploymentException: Clusterwide exception: Failed to deploy application com.diagonal/appl~main. Check causing exception for details (trace file). Hint: Are all referenced components deployed and available on the engine?
20081107165952 Info   : (message ID: com.sap.sdm.serverext.servertype.inqmy.extern.EngineApplOnlineDeployerImpl.performAction(DeploymentActionTypes).REMEXC)
20081107165952 Info   :Nov 7, 2008 4:46:07 PM   Info: Starting to save the repository
20081107165952 Info   :Nov 7, 2008 4:46:07 PM   Info: Finished saving the repository
20081107165952 Info   :Nov 7, 2008 4:46:07 PM   Info: Starting: Update: Selected software component 'CIAS_WD_APPLICATIONS'/'diagonal.com'/'dev_devcias_C'/'1000.1.0.6.0.20081107075633''/'0' updates currently deployed software component 'CIAS_WD_APPLICATIONS'/'diagonal.com'/'dev_devcias_C'/'1000.1.0.0.0.20061122075934''/'1'.
20081107165952 Info   :Nov 7, 2008 4:46:07 PM   Error: Aborted: software component 'CIAS_WD_APPLICATIONS'/'diagonal.com'/'dev_devcias_C'/'1000.1.0.6.0.20081107075633''/'0':
20081107165952 Info   :Failed deployment of SDAs:
20081107165952 Info   :development component 'appl/main'/'com.diagonal'/'dev_devcias_C'/'823'/'0' : aborted
20081107165952 Info   :Please, look at error logs above for more information!
20081107165952 Info   :Nov 7, 2008 4:46:07 PM   Info: Starting to save the repository
20081107165952 Info   :Nov 7, 2008 4:46:08 PM   Info: Finished saving the repository
20081107165952 Info   :Nov 7, 2008 4:46:08 PM   Info: J2EE Engine is in same state (online/offline) as it has been before this deployment process.
20081107165952 Info   :Nov 7, 2008 4:46:08 PM   Error: -
At least one of the Deployments failed -
20081107165952 Info   :end of log
20081107165952 Info   :RC of deployment: 12
20081107165952 Info   :Step SDM-deploy ended with result 'fatal error' ,stopping execution at 2008-11-07 16:59:52.0155 +9:00

SCOM 2012 R2 Error The connector the module is configured for no longer exists

Hi All,
The Microsoft Operations Manager Connector Framework Alert Forwarding module failed to mark an alert for forwarding because the connector the module is configured for no longer exists.
Connector Id: 57a14deb-a74b-520e-ac32-ba8d340d112d

Hi Mark,
You can try the following steps,
This is because we have deleted a connector that still had a live subscription associated with it. We need to go and delete that subscription to clean this up. The problem is – the connector is gone, so the subscription is no longer available
in the UI.
Therefore – we will have to delete it manually. This subscription (as all subscriptions) is kept in the “Notifications Internal Library” MP. You need to export that MP to XML. FIRST MAKE A BACKUP COPY OF THIS FILE IN CASE YOU MESS UP, then
open it for editing in Notepad, or your XML editor of choice.
All subscriptions in this MP are kept in the <Monitoring> <Rules> section. To identify which connector subscription RULE is causing the problem – you can search for the connector ID, from the event 11502 above. In my example – my connector
ID from this event is: b7a64deb-f7ff-440e-bc30-d08d340dfe8d.
So – I search the XML for that string – and find b7a64deb-f7ff-440e-bc30-d08d340dfe8d in the <WriteActions> section of a specific <Rule>:
<WriteActions>
<WriteAction ID="WA" TypeID="SystemCenter!Microsoft.SystemCenter.ConnectorFrameworkAlertWriteAction">
<ConnectorId>{b7a64deb-f7ff-440e-bc30-d08d340dfe8d}</ConnectorId>
</WriteAction>
</WriteActions>
Good – I have identified the problem. Now – I need to do two things:
Find the rule ID – to identify the display string associated with it… then delete that display string.
Delete the orphaned subscription rule.
So – I move up in the XML section of this rule – and I find my Rule ID. (here is mine:)
<Rule ID="ProductConnectorSubscription2850f8e3_afe7_4c36_84d2_ee258bd086eb"
I then search for the part above which I bolded in blue (yours will be different – search for your string)
What this finds – is the display string section of the XML – which maps this GUID ID to the common name that you gave the subscription. (here is mine:)
<DisplayString ElementID="ProductConnectorSubscription2850f8e3_afe7_4c36_84d2_ee258bd086eb">
<Name>Process All New Alerts</Name>
</DisplayString>
So – I need to DELETE this section from the XML…. just the section above, from my very specific <DisplayString ElementID="ProductConnectorSubscription2850f8e3<GUID> line, to the very next </DisplayString>.
Next – I need to delete the entire <rule> which contains the subscription we want to remove. Mine will be from:
<Rule ID="ProductConnectorSubscription<GUID> line to the very next </Rule>
When you are happy – you can import this XML MP back into the management group. It should import with no errors. If you get an error – you made a mistake when editing the XML. You can look on the RMS event log for the specific problem – there
will be a critical event there if it fails to import.
second part for this link
http://blogs.technet.com/b/kevinholman/archive/2009/09/10/removing-an-old-product-connector.aspx
Regards, Ibrahim Hamdy

The e-mail message cannot be sent. Make sure the outgoing e-mail settings for the server are configured correctly.

Hi,
I have SP 2013, and it was working properly. and workflows send emails perfectly. yesterday, i decided to build a fresh site collection so i deleted the old one and created a new one. now, workflows are unable to send emails. i'm sure it has nothing to do
with my mail server cuz no changes happened to it. i'm sure about the settings for outgoing mail on central admin. all i did, was to enter mail server IP in outgoing mail field and email below it.
in the workflow status the status says "error" followed by this message: "The e-mail message cannot be sent. Make sure the outgoing e-mail settings for the server are configured correctly."
Any help please?

Hi,
According to your post, my understanding is that you failed to send email after building a fresh site collection.
I recommend to verify that you have entered your SMTP server name correctly.
You can add it as FQDN e.g. ServerName.DomainName.
Here are a similar articles for your reference:
http://social.technet.microsoft.com/Forums/sharepoint/en-US/f0605f59-0baa-49c9-854e-0fb369a9e5a0/cant-seem-to-get-emails-to-send-in-sharepoint
http://alpesh.nakars.com/blog/sharepoint-outgoing-email-issue/
Best Regards,
Linda
Linda Li
TechNet Community Support

I keep getting the following error message: Sync encountered an error whole connecting: Server incorectly configured. Please try again. What does this mean?

I keep getting the following error message:
Sync encountered an error while connecting: Server incorectly configures. Please try again.
What is this?

Hi!
The sync infrastructure is having some issues and we are working to fix them as soon as possible.
Check this site for the latest updates: https://services.mozilla.com/status

How to fix "The e-mail message cannot be sent. Make sure the outgoing e-mail settings for the server are configured correctly."

Hi All,
I have move dev to production, then workflow facing "The e-mail message cannot be sent. Make sure the outgoing e-mail settings for the server are configured correctly". Actually it is working fine in dev, in production mail not going. How to fix
this issue?
Thanks in advance!

make sure your outgoing email settings are correct and also make sure servers are in exchange rely if you are using exchange.http://sharepoint.stackexchange.com/questions/35353/how-to-handle-e-mail-message-cannot-be-sent-error
check below blogs: http://www.chrisbuchanan.ca/Blog/Lists/Posts/Post.aspx?ID=2
another option to put pause in right place:
http://social.msdn.microsoft.com/Forums/sharepoint/en-US/6e848a25-019d-4220-aff6-c535da933e0f/the-error-message-in-workflow-history-the-email-message-cannot-be-sent
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

It tells me that there's an error on the server when i enter my password. what can i do?

it tells me that there's an error on the server when i enter my password. what can i do???

This is not an issue with Firefox, your message actually confirms this by the error you listed. "There was an error on the server" Firefox is only an internet browser basically, the connection to the internet & such local configuration is outside external from Firefox, the server is on the host side of the connection. It sounds like you have a bad connection between the server & your computer which Firefox has nothing to do with, rather it is your local network. I would actually check out Windows 7 VPN support, you need to setup a virtual private network VPN which is basically a secure connection stable enough to support the bandwidth required to facilitate the meeting.
This is why you are also having the problem with Internet Explorer as you need to correctly configure a VPN connection via windows if your connection supports it.

Encountered an error when attempting to open Lightroom for the first time. Went to Lightroom Help and searched for the error "An error occurred when attempting to change modules". Non of the solutions helped. what now?

Encountered an error when attempting to open Lightroom for the first time. Went to Lightroom Help and searched for the error "An error occurred when attempting to change modules". Non of the solutions helped. What now?

I am getting this error message as well. I have just downloaded Lightroom recently. I try to click on Lightroom / preferences....and nothing happens. I tried to uninstall and it is greyed out so I can't do that either. Suggestions? Please help?

HT4623 i have updated my i.phone 4 g but after updating when i turned on my phone it was showing the sign to connect to i.tunes and when when i connected i.tunes showed error that the server could not be contacted.... so what i can do now to resolve the

i have updated my ios 5 to 6 but when the updating aur dowloading has comleted and i turned on the phone it showed a sign to connect to the itunes and then i connecte to itunes but i.tunes showed error that the server could not be contacted....now what i can do to resolve the problem????

has your phone been jailbroken?

Face time no longer works for me. Lost my contacts even! Keep trying to change PWD and keep getting same error message: The server encountered an error processing registration. Please try again later. Can you advise? Thanks!

Face time no longer works for me. Lost my contacts even! Keep trying to change PWD and keep getting same error message: The server encountered an error processing registration. Please try again later. Can you advise? Thanks!

Face time no longer works for me. Lost my contacts even! Keep trying to change PWD and keep getting same error message: The server encountered an error processing registration. Please try again later. Can you advise? Thanks!

Deployment error when the server is configured for debugging

Similar Messages

Maybe you are looking for