Deploytool errors when creating a Web Component (.war)

Ok, I've got some serious issues with the deploytool in the latest version of J2EE (Sun Java Application Server 8).
I can create a .war file with the servlets, JSPs etc that I wish to have. But when I try to add a Resource ref. and save the changes, I get a SAXParseException and the war-file becomes corrupted (actually it is the web.xml i the war-file that becomes empty).
Is this a known bug and are there any workarounds?

Hi,
I tried to reproduce your problem but was unable to get the error you described. I created a war file, and added a resource ref -- no error and the web.xml looked accurate. Can you provide a sample war file that exhibits this problem? If you can, I will look into the problem and perhaps provide a solution for you.
You can send a sample war file to:
kpaulsen -nospam- @ yahoo.com
Remove the " -nospam- " from the email address above.
Thanks,
Ken Paulsen

Similar Messages

WIS 10901 error when creating a webi report based on OLAP unv (SSAS 2005)

Hi,
I'm using two VM.
Machine A is running SSAS 2005. I'm able to create SSAS cube. Everything is ok
Machine B is runing BO XIR3.1. I'm able to create webi report on relational DB without any problem or opening samples.
Both VM machines are on the same custom network and I'am able to ping both. SQL managment server studio is installed on both machines. I'm able to manage SSAS from B also and not only from A.
Creating unv with BO designer on machine B is OK, connexion is runing and universe has been created and published on the BO server
But when I create a webi report from B, using my OLAP unv based on SSAS located on machne A I recieve following error message :
Une erreur de base de données s'est produite. Le message d'erreur est le suivant : . (WIS 10901)
thanks for your help,
Nicolas

Hi
Ya I used SAP authentication - then also get same error.
Connections are created with username, password to access SAP Source
Thanks!
J>M>Raj
Edited by: John Milton on Jun 25, 2009 10:03 AM

Security Error when creating a web service with Flex

Hello comminuty.
I'm using Flex to create a standalone application and I have to use web services to retrieve data from SAP.
I used the bapi bapi_flight_getlist to create an associated WS that works fine (tested with the Eclipse's WS Explorer).
In Flex Builder, I use the following code to create my web service:
     <mx:WebService
          showBusyCursor="true"
          id="service"
          wsdl="{wsdl}"
          result="resultCreateWSHandler(event);"
          fault="faultCreateWSHandler(event);">
            <mx:operation name="FlightGetList"
                 result="resultWSHandler(event)"
                 fault="faultWSHandler(event)"></mx:operation>
        </mx:WebService>
And this is the error I'm getting:
(mx.messaging.messages::ErrorMessage)#0
body = (null)
clientId = "DirectHTTPChannel0"
correlationId = "E578ED8C-EF29-44E7-8D57-57B4DB6EB613"
destination = ""
extendedData = (null)
faultCode = "Channel.Security.Error"
faultDetail = "Destination: DefaultHTTP"
faultString = "Security error accessing url"
headers = (Object)#1
    DSStatusCode = 0
messageId = "6E7AC45E-418D-90CD-96AD-57B52DB1DAF4"
rootCause = (flash.events::SecurityErrorEvent)#2
    bubbles = false
    cancelable = false
    currentTarget = (flash.net::URLLoader)#3
      bytesLoaded = 0
      bytesTotal = 0
      data = (null)
      dataFormat = "text"
    eventPhase = 2
    target = (flash.net::URLLoader)#3
    text = "Error #2048: Violation de la sécurité Sandbox : http://localhost:8300/ztest2/bin-debug/ztest2.swf ne peut pas charger de données à partir de http://XXXX:8006/sap/bc/srt/wsdl/bndg_DEB8A28C2E19EEF19C080050568D135B/wsdl11/allinone/ws_policy/document?sap-client=800."
    type = "securityError"
timestamp = 0
timeToLive = 0
Translation: "Error #2048: Sandbox security violation: http:....swf cannot load data from http:...client=800"
Would any of you have an idea about what is causing this error??
Thanks for any help you can provide.
Regards,
C.

Hi Cristina
Did your flex application worked. i am also having same problm. cant access the BAPI from standalone flex application.
Jay

Error when creating Z*BSP component from BSP_WD_CMPWB

Hi,
I have created a BSP component with one view. But, alwayz it is saying one message : "View is not loaded into runtime repository".
Can you please tell me, what I need to do to remove this message?
Thanks,
Sandeep

Hi Sandeep,
The message will come up as long as you have not assigned the view to any of the window/view sets in the repository. You can of course safely ignore it if it's not meant to be(for example interface views that are meant to be used as popups)
Regards,
Arun Prakash

Error when creating the webi query

when i try to create a query based on template universes delivered with BOBJ webi (as eFashion) i get the following error
A database error occured. The database error text is: (CS) "DBDriver failed to load: C:\Program File\Business Objects\BusinessObjects ENterprise12.0\win32_x86\dataAccess\connectionServer\dbd_wodbc3.dll (The specified procedure could not be found. )". (WIS 10901)
when i press help i get
Cause
The database that provides the data to this document has generated an error. Details about the error are provided in the section of the message indicated by the field code: .
Please help.

ok i did
[error on access Webi WS 10901;
error on access Webi WS 10901
thx

An unexpected error when create a web application

hello,
I'm trying to create a new web application ( under Deployments in console). I
just manually create an sub-dir under ".\config\<active-domain>\applications"
directory, say WebAppDir. Then I went to the console and right-click on the "Web
Applications" and select "Configure a new Web Application", then I filled out
the Name, URI, and Path as follows:
Name: WebAppDir
URI: WebAppDir
Path: .\config\<active-domain>\applications
then click "Create" , I then got the following error message, I don't know why
and what i did wrong... please let me know what did i do wrong ? I don't have
any things under the new dir i created, but I thought i would be fine, but it
didn't.
Here is the error message:
An unexpected error was encountered in processing your request.
Exception
java.lang.NullPointerException
     at weblogic.management.console.pages._panels._mbean._webappcomponent._jspService(_webappcomponent.java:212)
     at weblogic.servlet.jsp.JspBase.service(JspBase.java:27)
     at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:208)
     at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:1127)
     at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:1529)
     at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:137)
     at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
Current Date
Wed Jun 06 17:01:25 CDT 2001
thanks so much...i really appreciate your helps.
-Kieu

hello,
I'm trying to create a new web application ( under Deployments in console). I
just manually create an sub-dir under ".\config\<active-domain>\applications"
directory, say WebAppDir. Then I went to the console and right-click on the "Web
Applications" and select "Configure a new Web Application", then I filled out
the Name, URI, and Path as follows:
Name: WebAppDir
URI: WebAppDir
Path: .\config\<active-domain>\applications
then click "Create" , I then got the following error message, I don't know why
and what i did wrong... please let me know what did i do wrong ? I don't have
any things under the new dir i created, but I thought i would be fine, but it
didn't.
Here is the error message:
An unexpected error was encountered in processing your request.
Exception
java.lang.NullPointerException
     at weblogic.management.console.pages._panels._mbean._webappcomponent._jspService(_webappcomponent.java:212)
     at weblogic.servlet.jsp.JspBase.service(JspBase.java:27)
     at weblogic.servlet.internal.ServletStubImpl.invokeServlet(ServletStubImpl.java:208)
     at weblogic.servlet.internal.WebAppServletContext.invokeServlet(WebAppServletContext.java:1127)
     at weblogic.servlet.internal.ServletRequestImpl.execute(ServletRequestImpl.java:1529)
     at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:137)
     at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
Current Date
Wed Jun 06 17:01:25 CDT 2001
thanks so much...i really appreciate your helps.
-Kieu

Database error when creating a web app instance

I'm trying to setup Project 2013 on SharePoint 2013 and am at the point where you create a Project web app instance. I'm on step 3 on this page.
http://alinimer.com/2013/02/28/install-configure-and-deploy-project-server-2013-part-4/
I'm getting an error saying "Provisioning Failed - see the Application event Log." In the event log it says
Failed to provision site PWA with error: Microsoft.Office.Project.Server.Administration.ProvisionException: Failed to provision database.
Database provisioning failed. The database ProjectWebApp contains a non project schema and cannot be used. ---> Microsoft.Office.Project.Server.Administration.ProvisionException: Database provisioning failed. The database ProjectWebApp contains a
non project schema and cannot be used.
   at Microsoft.Office.Project.Server.Administration.PsiServiceApplication.EnsureProjectServiceDatabase(ProjectProvisionSettings provset, String collation, ProjectDatabaseStateType& originalDatabaseState)
   --- End of inner exception stack trace ---
   at Microsoft.Office.Project.Server.Administration.PsiServiceApplication.EnsureProjectServiceDatabase(ProjectProvisionSettings provset, String collation, ProjectDatabaseStateType& originalDatabaseState)
   at Microsoft.Office.Project.Server.Administration.PsiServiceApplication.CreateSite(ProjectProvisionSettings provset)
I'm new to Project Server and fairly new to SharePoint so is this something that's easy to fix? The database was created new for Project.
Free computer help and tips http://www.onlinecomputertips.com

Looking at the code, it flags this if the database specified is not empty. Can you validate that the database is either new or does not have any tables, views, sprocs, etc?
Trevor Seward, MCC
Follow or contact me at...
&nbsp&nbsp
This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

503 Service unavailable error while creating a web application

Hello,
i ve just installed VS .NET 2003 & .net Connector 2.0.
i get the following error when creating a web project:
'http://localhost/webapplication1', HTTP/1.0 503 Service unavailable.
Have any of you faced this problem ?
Thanks,
Jamal

Hello,
thanks for the answer.
No i didn't try to create a web projet before installing NCo.
I ran C:\WINDOWS\Microsoft.NET\Framework\v1.1.4322\aspnet_regiis.exe but doesn't help.
I didn't have NCo 1.x installed before !
any other help ?
Thanks,

Error when creating files for transport request SAPK-700BGINPLMWUI

Hello experts,
We're upgrading our 46c System to ERP 6.0 EHP4.
In Phase EHP_INCLUSION we get the following error Message: Disassembling package queue failed, rc = "2", reason = "Error when creating files for transport request SAPK-700BGINPLMWUI"
We've already checked the SAINT version; Upgrade Fix, SAPCAR version. We've checked our TMS as well and everything seems O.K.
Any help would be really appreciated!!!
Complete Error message:
EhP component PLMWUI, 700
Looking for SAINT package for 'PLMWUI' ...
R3upReadNewPackages:
patchType='U', langVect='DEC'
RFC Login to: System="X05", Nr="00", GwHost="sxt ", GwService="sapgw00"
RFC Login succeeded
Calling function module "spda_read_new_packages" by RFC
ismovesVersion='0'
R3upReadNewPackages: exit: rc=0
... No matching package found.
R3upReadNewPackages:
patchType='I', langVect='DEC'
RFC Login to: System="X05", Nr="00", GwHost="sxt ", GwService="sapgw00"
RFC Login succeeded
Calling function module "spda_read_new_packages" by RFC
ismovesVersion='0'
R3upReadNewPackages: exit: rc=0
Found: name = 'PLMWUI', release = '700', package = 'SAPK-700BGINPLMWUI', type = 'AOI'
... Matching package found: 'PLMWUI','700','SAPK-700BGINPLMWUI'
(trc) R3upPatchDisassembleQueue: 1 package queue entries
(trc) R3upPatchDisassembleQueue: force=YES
(trc) R3upPatchDisassembleQueue: 1 packages will be disassembled
Starting disassembling package queue
Date & Time: 20100319133139
Starting RFC Login to: System = "X05", GwHost = "sxt ", GwService = "sapgw00"
RFC Login to: System="X05", Nr="00", GwHost="sxt ", GwService="sapgw00"
RFC Login succeeded
Calling function module "SPDA_DISASSEMBLE_QUEUE" by RFC
Input table IT_PATQ:
"SAPK-700BGINPLMWUI","000","AOI","PLMWUI","700","SAP PLM Web UI","00"
Call of function module "SPDA_DISASSEMBLE_QUEUE" by RFC succeeded
Logging off from SAP system
Date & Time: 20100319133139
Disassembling package queue failed, rc = "2", reason = "Error when creating files for transport request SAPK-700BGINPLMWUI"

Hello Anthes,
Please Check the things in following sequence :
1.Use latest SAPehpi, R3trans and tp versions.
2. users/group authorization issue and/or ownersip limitations (set 777) .Reboot the server to make sure, that the authorisations are updated and there is no lock on a file in the EHPI dir.Repeat the phase.
Folders where permissions should be 777 are Upgrade directory, Data Directory, Cofile directory and .../EPS/in.
3. Source file corruption can be ruled out by execution
R3trans -l /usr/sap/<SID>/..../abap/data/R-700BGINPLMWUI.SAP (The data file corresponding to the Package which is giving error). Check if this ends fine.
Note 2050
4. Confirm that your transport tool is 'healthy' by testing it in STMS. In SPAM in client 000 use the function Disassemble package and enter the package <Package name>.
5. Try to update the kernel if it not helps.
Best Regards
Niraj

Error when creating a folder ,iviews in the portal

Dear sap gurus ,
I m facing a error when creating a Folder or an iview in my portal i'm using EP 7.0 sp11 ,The error is :
Portal Runtime Error
An exception occurred while processing a request for :
<b>iView : pcd:portal_content/com.sap.pct/admin.templates/iviews/editors/com.sap.portal.defaultFolderWizard
Component Name : com.sap.portal.admin.defaultwizards.DefaultFolderWizard
SQLException is not transient, error code = 1654, sql state = 72000 Batch rolled back. Caused by java.sql.BatchUpdateException: ORA-01654: unable to extend index SAPSR3DB.SYS_C004057 by 128 in tablespace PSAPSR3DB at oracle.jdbc.driver.DatabaseError.throwBatchUpdateException(DatabaseError.java:343) at oracle.jdbc.driver.OraclePreparedStatement.executeBatch(OraclePreparedStatement.java:10698) at com.sap.sql.jdbc.basic.BasicPreparedStatement.executeBatch(BasicPreparedStatement.java:263) at com.sap.sql.jdbc.oracle.Oracle10gPreparedStatement.executeBatch(Oracle10gPreparedStatement.java:100) at com.sap.sql.jdbc.direct.DirectPreparedStatement.executeBatch(DirectPreparedStatement.java:1129) at com.sap.sql.jdbc.common.CommonPreparedStatement.executeBatch(CommonPreparedStatement.java:991) at com.sap.engine.services.dbpool.wrappers.StatementWrapper.executeBatch(StatementWrapper.java:270) at com.sapportals.portal.pcd.pl.AttributeHeadersTable.insert(AttributeHeadersTable.java:259) at com.sapportals.portal.pcd.pl.PlObject.save(PlObject.java:518) at com.sapportals.portal.pcd.pl.PlContext.createSubcontext(PlContext.java:544) at com.sapportals.portal.pcd.gl.xfs.XfsContext.createChildOnPersistence(XfsContext.java:1374) at com.sapportals.portal.pcd.gl.xfs.XfsContext.createChildAndNotify(XfsContext.java:1128) at com.sapportals.portal.pcd.gl.xfs.XfsContext.createChild(XfsContext.java:1087) at com.sapportals.portal.pcd.gl.xfs.XfsContext.createSubcontext(XfsContext.java:843) at com.sapportals.portal.pcd.gl.xfs.BasicContext.createBasicSubcontext(BasicContext.java:190) at com.sapportals.portal.pcd.gl.PcdPersContext.createSubcontext(PcdPersContext.java:191) at com.sapportals.portal.pcd.gl.PcdFilterContext.filterCreateSubcontext(PcdFilterContext.java:254) at com.sapportals.portal.pcd.gl.PcdProxyContext.createSubcontext(PcdProxyContext.java:147) at com.sapportals.portal.pcd.gl.PcdGlContext.createSubcontext(PcdGlContext.java:440) at com.sapportals.portal.pcd.gl.PcdProxyContext.createSubcontext(PcdProxyContext.java:624) at com.sapportals.portal.pcd.gl.PcdProxyContext.createSubcontext(PcdProxyContext.java:619) at com.sap.portal.admin.wizard.folderwizardpanes.SavePane.doAfterSubmit(SavePane.java:59) at com.sapportals.admin.wizardframework.core.WizardInstance.doPost(WizardInstance.java:356) at com.sapportals.admin.wizardframework.core.WizardInstance.doWizard(WizardInstance.java:174) at com.sapportals.admin.wizardframework.core.WizardInstance.doWizard(WizardInstance.java:99) at com.sapportals.admin.wizardframework.AbstractDynamicWizard.doContent(AbstractDynamicWizard.java:98) at com.sapportals.portal.prt.component.AbstractPortalComponent.serviceDeprecated(AbstractPortalComponent.java:209) at com.sapportals.portal.prt.component.AbstractPortalComponent.service(AbstractPortalComponent.java:114) at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328) at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136) at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189) at com.sapportals.portal.prt.component.PortalComponentResponse.include(PortalComponentResponse.java:215) at com.sapportals.portal.prt.pom.PortalNode.service(PortalNode.java:645) at com.sapportals.portal.prt.core.PortalRequestManager.callPortalComponent(PortalRequestManager.java:328) at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:136) at com.sapportals.portal.prt.core.PortalRequestManager.dispatchRequest(PortalRequestManager.java:189) at com.sapportals.portal.prt.core.PortalRequestManager.runRequestCycle(PortalRequestManager.java:753) at com.sapportals.portal.prt.connection.ServletConnection.handleRequest(ServletConnection.java:240) at com.sapportals.portal.prt.dispatcher.Dispatcher$doService.run(Dispatcher.java:522) at java.security.AccessController.doPrivileged(Native Method) at com.sapportals.portal.prt.dispatcher.Dispatcher.service(Dispatcher.java:405) at javax.servlet.http.HttpServlet.service(HttpServlet.java:853) at com.sap.engine.services.servlets_jsp.server.servlet.InvokerServlet.service(InvokerServlet.java:156) at javax.servlet.http.HttpServlet.service(HttpServlet.java:853) at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401) at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266) at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:387) at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:365) at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:944) at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:266) at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95) at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:160) at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33) at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41) at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) at java.security.AccessController.doPrivileged(Native Method) at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100) at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170) .
Exception id: 10:50_23/11/07_0005_16892850
See the details for the exception ID in the log file</b>
Thanks and Regards,
sathya

Hi Sathya
The following line in your log tells you what is wrong:
ORA-01654: unable to extend index SAPSR3DB.SYS_C004057 by 128 in tablespace PSAPSR3DB
This is a configuration that you or the dba people need to do. The first thing I would check is if autoextend is on/off on your tablespace PSAPSR3DB. If it's 'off' you either need to put it to 'on' or manually extend the size of your tablespace depending on how much harddrvive space you have to play with. Here is a more detailed solution on how to do it:
Oracle Error : ORA-01654: unable to extend index string.string by string in tablespace string
Cause: Failed to allocate an extent of the required number of blocks for an index segment in the tablespace indicated.
Action: Use ALTER TABLESPACE ADD DATAFILE statement to add one or more files to the tablespace indicated.
Br
Göran

Error when creating a webpart page in site pages - Sharepoint 2013

Hi,
I am getting Unexpected error when creating a new webpart page in site pages on sharepoint 2013 site.
I have no clue on this.
Any help is much appreciated.
Thank in advance.
Smile Always

Hi Smile,
For troubleshooting this issue, let's verify the followings:
Whether you can create wiki pages well.
Whether this issue occurs for other sties.
Whether all users have this issue. Please test with Site administrator, compare the result.
As Naveen said, please check the log file to find more information about this issue. The path of the log file is: C:\Program Files\Common Files\microsoft shared\Web Server Extensions\15\LOGS.
Best Regards,
Wendy
Wendy Li
TechNet Community Support

Error when creatibg a web service in SAP r/3 ecc 5, WebAS 640

We are trying to expose a BAPI (BAPI_CUSTOMER_GETSALESAREAS) as a web service on SAP R/3 ECC 5. web AS 640.
We created the virtual interface (Z_VI_CUSTOMER_BAPI)and the web service definition (Z_WSD_CUSTOMER_BAPI)from SE80. When we try to release the web service definition from WSCONFIG, we get an error saying:
"Error when creating web service(Web Service Definition Z_WSD_CUSTOMER_BAPI for SOAP application unbekannt)"
Please help...
Thanks,
Shailesh

Hi.
I think I must clarify my question.
The Web Service is not called inside SAP R/3 but externally. For testing pourpose I actually use WS Navigator and XMLSpy.
The method inside ABAP Server Proxy which is exposed as a Web Server in SAP R/3 system is the following. Note that the Web Service is Asynchronous.
METHOD zpi_ii_test_ws_4_in~test_ws_4_in.
DATA: lwa_zpi_test TYPE zpi_test.
lwa_zpi_test-mandt = input-mt_test-record-client.
lwa_zpi_test-bukrs = input-mt_test-record-company.
lwa_zpi_test-belnr = input-mt_test-record-document.
lwa_zpi_test-gjahr = input-mt_test-record-year.
INSERT zpi_test FROM lwa_zpi_test.
COMMIT WORK.
ENDMETHOD.
I have created another Web Service in SAP R/3 which is Synchronous, and the error does not occurs. The following is the method inside ABAP Server Proxy which is exposed as a Web Service in SAP R/3 system.
METHOD zpi_ii_test_ws_3_in~test_ws_3_in.
DATA: l_bukrs      TYPE bukrs,
        l_belnr      TYPE belnr_d,
        l_gjahr      TYPE gjahr,
        lr_belnr     TYPE RANGE OF belnr_d,
        lwa_zpi_test TYPE zpi_test.
l_bukrs = input-mt_req-msg+0(4).
l_gjahr = input-mt_req-msg+4(4).
SELECT MAX( belnr ) INTO l_belnr
    FROM zpi_test
    WHERE bukrs EQ l_bukrs
      AND belnr IN lr_belnr
      AND gjahr EQ l_gjahr.
IF l_belnr IS INITIAL.
    l_belnr = '4700000000'.
ELSE.
    l_belnr = l_belnr + 1.
ENDIF.
lwa_zpi_test-mandt = sy-mandt.
lwa_zpi_test-bukrs = l_bukrs.
lwa_zpi_test-belnr = l_belnr.
lwa_zpi_test-gjahr = l_gjahr.
INSERT zpi_test FROM lwa_zpi_test.
COMMIT WORK.
output-mt_resp-msg = l_belnr.
ENDMETHOD.
I hope to have clarified my question.
Rafael Rojas.

Procurement Coordinator received Authorization Error when creating Bid Inv

Hi All,
In SRM I have an issue Please help me in solving this. Please see below
Procurement Coordinator received Authorization Error when creating Bid Invitation from Sourcing Cockpit. Message states u201CMissing Transaction BBP_BID_EXTSOu201D; however Bid # is still created. User requests that Authorization issue is resolved and Bid # appear for Procurement Coordinators. This problem does not happen for Commodity Managers

Hi
Please do the following steps.
When you are using the Internal ITS,you need not run the report W3_PUBLISH_SERVICES.(only SIAC_PUBLISH_ALL_INT )
ALso pls check the foll:
-->activate the services through SICF tcode.
> Go to SICF transaction and activate the whole tree under the node Deafult host>sap>bc>gui>sap>its.
>Also maintain the settings in SE80>utilities>settings>internet transactuon server-->test service/Publish.
Table TWPURLSVR should have entries for the / SRM server line as well as gui and web server.
Could you please review again the following steps ?
Did you check that ICM was working correctly (TA SMICM) ?
1-Activate the necessary ICF services
With transaction SICF and locate the
services by path
/sap/public/bc/its/mimes
/sap/bc/gui/sap/its/webgui
2- Publish the IAC Services
With Transaction SE80 locate from
the menu Utilities -> Settings ->
Internet Transaction Server (Tab) ->
Publish (Tab) and set On Selected
Site = INTERNAL.
3- Locate the Internet Services SYSTEM and WEBGUI.
Publish these services with the Context
Menu -> Publish -> Complete Service
4- Browse to http://<server>:<icmport>/sap/bc/gui/
sap/its/webgui/! and login to the
webgui.
Hope this will help.
Please reward suitable points.
Regards
- Atul

Error in Creating New Web Application SharePoint 2013

Everything was working fine but today when i try to create a new web application i am getting the following error.It's happening whenever i am trying to create a new web application.
The directory C:\inetpub\wwwroot\wss\VirtualDirectories\26060 is already being used by another IIS Web Site. Choose a different root directory for your new Web application.
But this port 26060 was not being used before and if i try to create new web application again then the error message occurs with the port number of the new web application.
Please help.

Hi HelloFragrance,
Are you using a host header when creating these web apps? If so have you tried creating without a host header? Also are you logged in with the Server with the Admin account? Check this out: (taken from Jeremy Taylor's
blog)
" 1. Ensure you have a proper dns name / entry in the hosts file of your server for the new url you are wanting to create.
2. Ensure you have typed in the ‘host header’ typed in when creating the new web application.
3. If this doesnt work, open IIS Manager – Start>run> inetmgr> and verify the home directory – it could be located on a different drive."
Also have you tried creating through Powershell and see if you run into the same issue or not?
http://technet.microsoft.com/en-us/library/ff607931(v=office.15).aspx
Hope this helps!
Thanks!
BlueSky2010
Please help and appreciate others by using forum features: "Propose As Answer", "Vote As Helpful" and
"Mark As Answer"

Publish to portal error when creating a iview

hi gurus,
I have done complete BI-EP integration. SSO is also working fine. But when i publish a query from query designer to portal, i am geting a error when creating a iview for the query as show below.
Error:
Java system error: call FM RSRD_X_MAP_TO_PRTL_USERS_PROXY to ProgId EPD_PORTAL_B07 on host epdev with SSO not authorized: Authentication failed.
when i manually create a BI Query iview,its working fine but to create a iview from publish to portal in query designer it is througing me error.
Regards

yes i have used that tool,,,i am getting below error.
RED
Web Template Validation failed due Java to ABAP communication problem (return code:ERSBOLAP018) Check Connector Connection of System Object in Portal System Landscape -
RED
Call ABAP->Java for function RSWR_RFC_SERVICE_TEST failed for destination 'SAP_EP' Check the data of the destination in transaction SM59. Check that the target host is running and has registered a program id in the gateway. -
RED
Call ABAP->Java for function RSRD_MAP_TO_PORTAL_USERS failed for destination 'SAP_EP' Check the data of the destination in transaction SM59. Check that the target host is running and has registered a program id in the gateway. -
RED
Web Template Validation failed due Java to ABAP communication problem (return code:ERSBOLAP018) Check Connector Connection of System Object in Portal System Landscape -
RED
Call ABAP->Java for function RSWR_RFC_SERVICE_TEST failed for destination 'SAP_EP' Check the data of the destination in transaction SM59. Check that the target host is running and has registered a program id in the gateway. -
RED
Call ABAP->Java for function RSRD_MAP_TO_PORTAL_USERS failed for destination 'SAP_EP' Check the data of the destination in transaction SM59. Check that the target host is running and has registered a program id in the gateway. -
RED
Calls from WebAS ABAP to WebAS Java will fail because the certificate of the BI mastersystem is not imported into J2EE ticket keystore Import the certificate to establish a trust relationship -
RED
The issuer DN of the imported ticket 'EPD_certificate' is the same as the issuer DN of SAPLogonTicketKeypair-cert Most likely, you are running an Add-In Installation. See note 917950, section 'Add-In Installation and importing Certificates with identical system ID (SID)' for details Display note 917950
I have checked everything,,but still geting red lights
Regards

Deploytool errors when creating a Web Component (.war)

Similar Messages

Maybe you are looking for