Depreciation - Planned amount calculation

Dear gurus,
I had a problem on SAP planned amount calculation as follow:
Asset acquisition value: 10.000.000
Use life: 3 years (36 months)
In AW01N, the planned amounts are:
Prd1: 277.778-
Prd2: 277.778-
Prd3: 277.777-
Prd4: 277.778-
I want the planned amount of Period 3 is just the same as the others (277.778-). Would you please help me solve this problem?
Thank you very much

Hi
Goi to Tr. Code OAYO
Select check Box - Net Book Value at year end.
Select Arthimatic rounding
Thanks
Anil

Similar Messages

  • Calculation of Budget Billing Plan (Amounts)

    Hi,
    I have a case where I need to find out on what basis the new budget billing plan is calculated.
    I want to verify on basis of what consumption the calculation is taking place. Suppose the monthly BB Amounts are calculated on basis of a certain consumption, say 300m3 but it should ideally be 400m3. How can I verify this?
    The BB Plan got created while invoicing but where (event, FM, Sub Routine, exit) exactly is the BB Amount calculation taking place?
    Thanks in advance,
    Suresh Reddy

    Hi Suresh,
    During billing, system extrapolates demand up to the next scheduled meter reading date and billing is simulated for the budget billing period. This is how consumption gets calculated. So, you need to look out for next scheduled meter reading date and calculate expected meter reading using extrapolation procedure configured in system to know consumption considered.
    Hope this helps.
    Regards,
    Avinash

  • Can you carry forward plan amounts on orders at year-end?

    We use KOCO to carryforward Internal Order Budgets and KOCF to carryforward Order Committments, but is there a way to move the PM Order Plan amounts from one fiscal year to the next?
    The issue we are having is that if the PM Order is linked to a WBS Element, the remaining plan amount from the previous year stays on S_ALR_87013558 Project Report, even when actual costs for the order are incurred in the following year. In this scenario the Project Assigned Total is overstated, because the order costs are in the Actual column and the RemOrdPlan column.
    Any help would be appreciated ...
    Thanks,
    Kay Clyburn

    Let's assume that Current PL Leave is Quota 10 (linked to Time Type 9010), that PL Leave Balance is Quota 12 (linked to Time Type 9012) and that PL Encashment is Quota 14 (linked to Time Type 9014), and that they all have the same validity dates.
    Create a PCR that is activated on the last day of the validity period of PL Leave Quotas (for the relevant ESG Grps and PSA Grps).  The Quota 10 Balance is transfered to Time Type 9011, and the Quota 12 Balance is transfered to Time Type 9013.
    Create a PCR that is activated on the first day of the validity period of PL Leave Quotas (for the relevant ESG Grps and PSA Grps).  Yesterday's value of TT 9011 and 9013 are added together, the sum is checked against the Constant (from V_T511K) holding the maximum transferable, and the lesser of that balance or the maximum is transfered to Time Type 9012, any excess being transfered to Time Type 9014.
    I have never created "Automatic Encashment", but I believe that it could be created by substituting the creation of TT 9014 by the creation of the Time Evaluation Wage Type 9014 in table ZL (and not having a Quota 14).  In Payroll Calculation, that WT could then be valuated and paid.

  • Residual order plan not calculated, in Object Currency for report 12KST1C

    Hello everybody,
    I have a question related to PS report painter Costs reports.
    I have created a form by copying the 12KST1C standard form, and I needed to create it, in order to change it and display the data (Costs, actual, commitment and so on) in <b>Object currency</b>, instead of CO Area Currency.
    The CO Area currency is USD and I need the reports in ARS (Argentinean Pesos)since the project objects (WBS elements, activities, etc) are in ARS too and I do not want to make a currency convertion to a specific date.
    So I created the Z12KST1C and change the ratios of the columns to Object Currency.
    The problem is that the Remaining order plan or Residual Order plan column, which is calculated at the runtime of the report is not showing any amount, while when I run the report in CO Area currency it shows the amount OK.
    I would like to know if that column (Residual Order plan) is only calculated in CO Area currency, or If I have to make adjustements to my form. Any ideas???
    I have read several SAP notes like 668240 (2 F) but I still do not see that amount calculated in Object currency.
    Thanks in advance
    Kind regards
    Pablo

    It really worked fine. Thanks a lot for your response to this issue.
    Kind regards
    Pablo

  • Depreciation is not calculating for the first month after go-live

    Hi gurus
    I am trying to calculate depreciation for the first month after going live of the project.
    But system is not posting anything
    I am using AFAB
    Test tun
    But no details
    Even no error messages
    Pls help me to proceed further.
    Reply will be appreciated with full points
    Thanks in advance
    Sneha

    Hi
    Thanks for info
    I tried even with Repeat run and other modes also but vain
    Am able to see the planned amount in Aw01n asset explorer.
    But even now it is not posting But there is no error
    Pls help me
    Thanks in advance
    Sneha

  • Creating Report- PS- Distributing the plan amount by period

    Hi,
    This is a question for PS module in BI.
    I have a planing amount as KF. I need to distribute the amount based on activity period. I need to distribute the amount in equal no. of periods. E.g. Planning amount  = 600 and activity period = 180 days (i.e. 6 months) then I need to display the planning amount divided into 6 periods (because of 6 months), i.e. 100 each. The starting period of the calculation is based on the fiscal period (or month) of the start date. Important point here is the distribution will change based on the activity period. If activity period is for 4 months then the division should be only for 4mnths.
    If the report is to be derived for the actual values then it is easy. I will place the fiscal period and the KFs in the columns. But how to derive such display for planning KFs? How to write the logic for this?
    Regards,
    Shailesh Naik

    Hi,
    The reports with 'Y' or 'Z' are not standard ones. You have to check with the person who developed this report. Ask to your ABAP team to help you.
    Regards,
    Eli

  • Transaction BGLOCS/AA01 depreciation plan

    Dear All,
    I have a specific question regarding the Depreciation plan in Bulgarian localization. What is the exact transaction to excute the report?
    In the documentation the transaction is wrong.
    Thank you very much!
    Desi

    Yes, I've maintained the Takeover configuration properly .... date 31.03.2011, last period is 3/2011.
    In case you didn't follow, I'm using manual depreciation key for assets. For AS91, I put amounts in 'Dep.posted' for current year up to period 3 eg $5000.
    But when I execute AFAB, system says Plan = 0 and Posted = -5000, therefore TBP = +5000.
    System is reversing the depreciation ?!
    Or does it mean after go-live, I have to post manual depreciation (ABMA) which includes the already posted $5000? So if I want depreciation of $2000 in April, I have to post $7000 in April via ABMA?

  • PO with Total Price amount calculated is incorrect at the time of printing.

    Hi Experts,
    I have one PO with Total Price amount calculated is incorrect at the time of printing.
    When my  user took the first print out the PO shows the incorrect Total amount.
    After 10 mins my user taken the printout again,that time it shows the Toatal Price value is correct amount.
    How i can analysis this type of BUG..!!!
    I am thinking it might be BUG...???
    Please advice with you valuable inputs.
    Best Regards,
    RK

    Hi,
    Are you using the standard programm and print form or are you using your own?. Most of the printing issues happens because of own programms. Try with the standard and then you will be able to see why is this happening.
    Best Regards,
    Arminda Jack

  • Is there a transaction to carryforward order plan amounts at year-end?

    We use KOCO to carryforward Internal Order Budgets and KOCF to carryforward Order Committments, but is there a way to move PM Order Plan amounts from one fiscal year to the next?  
    The problem is that if the PM Order is linked to a WBS Element, the remaining plan amount from the previous year stays on S_ALR_87013558 Project Report, even when actual costs for the order are incurred in the following year.  In this scenario the Project Assigned Total is overstated, because the order costs are in the Actual column and the RemOrdPlan column.
    Any help would be appreciated ...
    Thanks,
    Kay Clyburn

        Upgrading is always exciting, Mansam! If you are eligible for an upgrade and your iPhone 5 is in good-working condition, you can take advantage of our Trade-in promotion. You can trade-in your current device and receive a Free iPhone 6 (16GB model). This promotion is only available at Verizon Wireless. Here is what qualifies as a good-working device:
      • Phone can turn on and off.
      • LCD screen is free of cracks and functioning correctly.
      • Phone and connecting ports are free of visible corrosion and water damage.
      • Battery is present.
      • Phone and charging port are free of cracks and dents, and are not missing any pieces or chunks (not including cords or accessories).
    Go to vzw.com to start your pre-order at 12:00 PM PST.
    Thank you,
    LenaA_VZW
    Follow us on Twitter @VZWSupport

  • How is exempt amount calculated for involuntary deductions?

    How is the exempt amount calculated for involuntary deductions?
    For child support CHILD_SUPP_CALCULATION_FORMULA fast formula can be used for getting the exempt amount?
    What about other involuntary deductions like alimony, creditor debt, bankruptcy?
    Can anyone please guide me to any documents concerning this.
    Regards,
    Manish.

    When you define the deduction using the Deduction template, the formula are automatically get defined.
    Ex in your case Creditor debt is an involuntary deduction and it should be paid using the third party payment, the priority of this deduction will be 1 and you also might need to define external organization to pay this amount.
    You can refer the payroll user guide which might provide you few details of the involuntary deduction

  • Depreciation planned calculater not as remaining life balance

    Hi SAP Expert,
    Currently, i have an issue on depreciation planned calculate divided by 12 month instead of 2 month remaining life balance.
    Asset Parameters
    Useful Life: 3 / 0
    Expired Useful Life: 2 / 10
    Remaining Life: 0 / 2
    Net book value balance is 59,907 and scarp value is 1. So depreciation will divided by 59,906.
    Now i see the depreciation posted/planned is every month 4,992.17 for 12 months.
    As the asset just left two month life, isn't that depreciation posted/planned will be 29,953 for 2 months?
    I am suspect configure on depreciation key.
    Please advice where to configure calculate depreciation base on remaining life?
    Thanks
    regards,
    ng chong chuan

    Hi  sanjeev and  Giridhar,
    Thanks for your guys helping.
    My depreciation key is set base on below
    Dep/int                    Phase    Base method      Decl-bal method    Period Control   Multilevel method
    Ord.depreciation    1            0011                   001                       005                  001
    Ord.depreciation    1            0017                   001                       003                  003
    Base method                     
    0011                                                  
    Type of depreciation            Ord.Depreciation                                 
    Dep. Method                       Percentage from the useful life             
    Reduce use.life at FY end    Blank                                                 
    Dep.after plnd life end           No                                                     
    Dep below NBValue zero      No                                                     
    Curb                                   No                                                      
    0017
    Type of depreciation             Ord.Depreciation 
    Dep. Method                       Immediate depreciation
    Reduce use.life at FY end    Check
    Dep.after plnd life end           Yes
    Dep below NBValue zero      No                                                     
    Curb                                   No                                                      
    Detail for the asset:
    Acquisition Date        :  29.09.2006
    Capitalization Date    :   29.06.2006
    Useful Life                 :    3 years
    Depreciation Start Date( Depreaciation Areas tab) :  01.06.2006
    But i have seen the first depreciation posted on 30.09.2006 and not 30.06.2006
    Please advice.
    Thanks
    regards,
    ng chong chuan

  • Depreciation planned in FA explore

    Hi ,
       I set fixed asset take-over time 31.12.2008 and specify last period post in prv. system 12.2008. But after I used AS91 to create legacy data I found in fixed asset master data the planned depreciation only from period 5 in  2009. I am wondering why there is no depreciation planned for period 1th-4th in 2009.  At the same time I run AFAB with warning"According to posting cycle, you should post period 005 next".
    Thanks.

    Hi,
    This you can have when you did more transports, it takes then the value from your last depreciation run from your development system.
    The values are stored in the the table T093D. You can have a look to it.
    I think you can run the depreciation run for period 1, 2, 3, 4 and 5 as repeat run. Then you get the real values in the correct period. An other option is to run in period 5 *** (1 to 5)
    see SAP note
    https://websmp230.sap-ag.de/sap(bD1ubCZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1065154
    https://websmp230.sap-ag.de/sap(bD1ubCZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=26073
    There are more note's with T093D

  • Actual & planned costs calculated while creating Plant Maintenance Order

    Hi All,
    I would like to know how the actual & planned costs calculated while creating Plant Maintenance Order (PM Order)
    Thanks,
    Ajay

    You need to create an activity rate for 2014 for cost centre 51260201 and activity type NAHG20.
    This can be done via transaction KP26, but is usually performed by your Finance team.
    PeteA

  • Change to planned amount on invoice

    All,
    We have a situation where the invoice change history indicates someone changed the "planned amount" on an invoice.   Can anyone tell me where the planned amount is on an invoice and how someone can change this value?
    It is related to a consignment settlement if that makes a difference.
    Thanks
    Sandra

    In this specific example the user changed the payment term from one defined to provide a discount if paid in X days to one that did not have a discount.   When the payment terms was changed to one that did not provide a discount, the system generated the "planned amount" as the amount we would have paid with the discount. 
    Regards,
    Sandra

  • Fixed Amount Calculation type

    Can anyone tell me the behavior of Fixed Amount Calculation Type for Purchasing?
    For example ZNB1 handling-fee value is $80, (scenario1) is $80 the total cost when the target quantity has been completed? (scenario2) Or will 80 be charged per GR?
    Scenario1 for fixed amount calculation type:
    total target quantity = 100 units
    amount = $80
    1st GR = 20 units, handling fee = $16
    2nd GR = 80 units, handling fee = $64
    Scenario2 for fixed amount calculation type:
    total target quantity = 100 units
    amount = $80
    1st GR = 20 units, handling fee = $80
    2nd GR = 80 units, handling fee = $80
    Thanks everyone!

    Scenario 1 is correct .

Maybe you are looking for