Creating Report- PS- Distributing the plan amount by period
Hi,
This is a question for PS module in BI.
I have a planing amount as KF. I need to distribute the amount based on activity period. I need to distribute the amount in equal no. of periods. E.g. Planning amount = 600 and activity period = 180 days (i.e. 6 months) then I need to display the planning amount divided into 6 periods (because of 6 months), i.e. 100 each. The starting period of the calculation is based on the fiscal period (or month) of the start date. Important point here is the distribution will change based on the activity period. If activity period is for 4 months then the division should be only for 4mnths.
If the report is to be derived for the actual values then it is easy. I will place the fiscal period and the KFs in the columns. But how to derive such display for planning KFs? How to write the logic for this?
Regards,
Shailesh Naik
Hi,
The reports with 'Y' or 'Z' are not standard ones. You have to check with the person who developed this report. Ask to your ABAP team to help you.
Regards,
Eli
Similar Messages
-
How 2 creat report for displaying the details of a Delivery Document using
how to create report for displaying the details of a Delivery Document using the tables LIKP, LIPS
thank you
regards,
jagrut bharatkumar shukla
points will be rewardedHI
I AM GIVING YOU MY DELIVERY DOCUMENT CODE...MODIFY IT ACCORDING TO YOUR REQUIREMENT
*& Report ZDELIVERY *
report zdelivery message-id z9bhu .
types: begin of t_likp,
vbeln type likp-vbeln, "Delivery
erdat type likp-erdat, "Date for rec creation
* LFDAT TYPE LIKP-LFDAT, "Delevery Date
* WAERK TYPE LIKP-WAERK, "Currency
kunnr type likp-kunnr, "Ship-To Party
kunag type likp-kunag, "Sold-to party
traty type likp-traty, "Means-of-Transport
end of t_likp.
types: begin of t_lips,
vbeln type lips-vbeln, "Delivery
posnr type lips-posnr, "Delivery item
matnr type lips-matnr, "Material Number
arktx type lips-arktx, "Short Text for Sales Order Item
lfimg type lips-lfimg, "Actual quantity delivered
netpr type lips-netpr,
* MEINS TYPE LIPS-MEINS, "Base Unit of Measure
vgbel type lips-vgbel, "Doc no of the reference document
end of t_lips.
types: begin of t_vbpa,
vbeln type vbpa-vbeln, "SD DocumenT Number
posnr type vbpa-posnr, "Item number
parvw type vbpa-parvw, "Partner function
kunnrb type vbpa-kunnr, "Customer Number 1
end of t_vbpa.
types: begin of t_kna1,
kunnr type kna1-kunnr, "Customer Number 1
name1 type kna1-name1, "Name 1
ort01 type kna1-ort01, "City
adrnr type kna1-adrnr, "Address
end of t_kna1.
types: begin of t_li_vbpa,
vbeln type likp-vbeln, "Delivery
erdat type likp-erdat, "Date for rec creation
* LFDAT TYPE LIKP-LFDAT, "Delevery Date
* WAERK TYPE LIKP-WAERK, "Currency
kunnr type likp-kunnr, "Ship-To Party
kunag type likp-kunag, "Sold-to party
traty type likp-traty, "Means-of-Transport
vbeln1 type lips-vbeln, "Delivery
posnr type lips-posnr, "Delivery item
matnr type lips-matnr, "Material Number
arktx type lips-arktx, "Short Text for Sales Order Item
lfimg type lips-lfimg, "Actual quantity delivered
netpr type lips-netpr, "Net Price
* MEINS TYPE LIPS-MEINS, "Base Unit of Measure
vgbel type lips-vgbel, "Doc no of the reference document
vbeln3 type vbpa-vbeln, "SD DocumenT Number
parvw type vbpa-parvw, "Partner function
kunnrb type vbpa-kunnr, "Customer Number 1
end of t_li_vbpa.
types: begin of t_final,
vbeln type likp-vbeln, "Delivery
erdat type likp-erdat, "Date for rec creation
kunnr type likp-kunnr, "Ship-To Party
kunag type likp-kunag, "Sold-to party
traty type likp-traty, "Means-of-Transport
vbeln1 type lips-vbeln, "Delivery
posnr type lips-posnr, "Delivery item
matnr type lips-matnr, "Material Number
arktx type lips-arktx, "Short Text for Sales Order Item
lfimg type lips-lfimg, "Actual quantity delivered
netpr type lips-netpr, "Net Price
vgbel type lips-vgbel, "Doc no of the reference document
vbeln3 type vbpa-vbeln, "SD DocumenT Number
parvw type vbpa-parvw, "Partner function
kunnrb type vbpa-kunnr, "Customer Number 1
name1 type kna1-name1, "Name 1
ort01 type kna1-ort01, "City
adrnr1 type kna1-adrnr, "Address
name2 type kna1-name1, "Name 1
ort02 type kna1-ort01, "City
adrnr2 type kna1-adrnr, "Address
name3 type kna1-name1, "Name 1
ort03 type kna1-ort01, "City
adrnr3 type kna1-adrnr, "Address
end of t_final.
* D A T A D E C L A R A T I O N
*&*********Internal Table Declaration****************&*
data: it_likp type standard table of t_likp.
data: it_lips type standard table of t_lips.
data: it_vbpa type standard table of t_vbpa.
data: it_kna1 type standard table of t_kna1.
data: it_li_vbpa type standard table of t_li_vbpa.
data: it_li_vbpa_temp type standard table of t_li_vbpa.
data: it_final type standard table of t_final.
*&*********Work Area Declaration********************&*
data: wa_likp type t_likp.
data: wa_lips type t_lips.
data: wa_vbpa type t_vbpa.
data: wa_kna1 type t_kna1.
data: wa_li_vbpa type t_li_vbpa.
data: wa_li_vbpa_temp type t_li_vbpa.
data: wa_final type t_final.
*&*********Data Declaration************************&*
data: d_vbeln type likp-vbeln.
data: flag type i value 0.
* S E L E C T I O N S C R E E N D E C L A R A T I O N
selection-screen begin of block block2 with frame title text-001.
select-options: s_vbeln for d_vbeln obligatory. "Delivery no
selection-screen end of block block2.
* A T S E L E C T I O N - S C R E E N E V E N T S
*AT SELECTION-SCREEN.
*PERFORM VALIDATE_DATA.
* S T A R T O F S E L E C T I O N E V E N T S
start-of-selection.
perform fetch_data.
perform merge_data_kna1.
*INCLUDE Z9BT_SH_***4_FORMS.
call function 'OPEN_FORM'
exporting
* APPLICATION = 'TX'
* ARCHIVE_INDEX =
* ARCHIVE_PARAMS =
device = 'PRINTER'
* DIALOG = 'X'
* FORM = ' '
language = sy-langu
* OPTIONS =
* MAIL_SENDER =
* MAIL_RECIPIENT =
* MAIL_APPL_OBJECT =
* RAW_DATA_INTERFACE = '*'
* SPONUMIV =
* IMPORTING
* LANGUAGE =
* NEW_ARCHIVE_PARAMS =
* RESULT =
exceptions
canceled = 1
device = 2
form = 3
options = 4
unclosed = 5
mail_options = 6
archive_error = 7
invalid_fax_number = 8
more_params_needed_in_batch = 9
spool_error = 10
codepage = 11
others = 12
if sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
sort it_final by vbeln.
loop at it_final into wa_final.
call function 'START_FORM'
exporting
* ARCHIVE_INDEX =
form = 'Z9BT_DELIVERY'
language = sy-langu
* STARTPAGE = ' '
* PROGRAM = ' '
* MAIL_APPL_OBJECT =
* IMPORTING
* LANGUAGE =
exceptions
form = 1
format = 2
unended = 3
unopened = 4
unused = 5
spool_error = 6
codepage = 7
others = 8
if sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
call function 'WRITE_FORM'
exporting
element = 'ITEM_LIST'
function = 'SET'
type = 'BODY'
window = 'MAIN'
* IMPORTING
* PENDING_LINES =
* EXCEPTIONS
* ELEMENT = 1
* FUNCTION = 2
* TYPE = 3
* UNOPENED = 4
* UNSTARTED = 5
* WINDOW = 6
* BAD_PAGEFORMAT_FOR_PRINT = 7
* SPOOL_ERROR = 8
* CODEPAGE = 9
* OTHERS = 10
if sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
call function 'END_FORM'
* IMPORTING
* RESULT =
exceptions
unopened = 1
bad_pageformat_for_print = 2
spool_error = 3
codepage = 4
others = 5
if sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
endloop.
call function 'CLOSE_FORM'
* IMPORTING
* RESULT =
* RDI_RESULT =
* TABLES
* OTFDATA =
exceptions
unopened = 1
bad_pageformat_for_print = 2
send_error = 3
spool_error = 4
codepage = 5
others = 6
if sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
*& Form VALIDATE_DATA
* text
* --> p1 text
* <-- p2 text
form validate_data .
select single vbeln into wa_likp-vbeln
from likp where vbeln in s_vbeln.
append wa_likp to it_likp.
if sy-subrc <> 0.
flag = 1.
endif.
endform. " VALIDATE_DATA
*& Form FETCH_DATA
* text
* --> p1 text
* <-- p2 text
form fetch_data .
select a~vbeln
a~erdat
a~kunnr
a~kunag
a~traty
b~vbeln
b~posnr
b~matnr
b~arktx
b~lfimg
b~netpr
b~vgbel
c~vbeln
c~parvw
c~kunnr
into table it_li_vbpa
from likp as a
left outer join lips as b on a~vbeln = b~vbeln
inner join vbpa as c on b~vgbel = c~vbeln
where a~vbeln in s_vbeln and
c~parvw = 'RE'.
endform. " FETCH_DATA
*& Form MERGE_DATA_KNA1
* text
* --> p1 text
* <-- p2 text
form merge_data_kna1 .
if it_li_vbpa[] is not initial.
it_li_vbpa_temp[] = it_li_vbpa[].
sort it_li_vbpa_temp by kunnr.
delete adjacent duplicates from it_li_vbpa_temp comparing kunnr.
loop at it_li_vbpa into wa_li_vbpa.
read table it_li_vbpa_temp into wa_li_vbpa_temp with key kunnr =
wa_li_vbpa-kunag.
if sy-subrc <> 0.
wa_li_vbpa_temp = wa_li_vbpa.
append wa_li_vbpa_temp to it_li_vbpa_temp.
endif.
read table it_li_vbpa_temp into wa_li_vbpa_temp with key kunnr =
wa_li_vbpa-kunnrb.
if sy-subrc <> 0.
wa_li_vbpa_temp = wa_li_vbpa.
append wa_li_vbpa_temp to it_li_vbpa_temp.
endif.
endloop.
endif.
if it_li_vbpa_temp[] is not initial.
select kunnr
name1
ort01
adrnr into table it_kna1 from kna1
for all entries in it_li_vbpa_temp
where kunnr = it_li_vbpa_temp-kunnr.
endif.
loop at it_li_vbpa into wa_li_vbpa .
wa_final-vbeln = wa_li_vbpa-vbeln.
wa_final-erdat = wa_li_vbpa-erdat.
*it_final-LFART = it_li_vbpa-LFART.
wa_final-kunnr = wa_li_vbpa-kunnr.
wa_final-kunag = wa_li_vbpa-kunag.
*it_final-VSTEL = it_li_vbpa-VSTEL.
wa_final-traty = wa_li_vbpa-traty.
wa_final-vbeln1 = wa_li_vbpa-vbeln.
wa_final-posnr = wa_li_vbpa-posnr.
wa_final-matnr = wa_li_vbpa-matnr.
wa_final-arktx = wa_li_vbpa-arktx.
wa_final-lfimg = wa_li_vbpa-lfimg.
wa_final-netpr = wa_li_vbpa-netpr.
*wa_final-GEWEI = it_li_vbpa-GEWEI.
*it_final-VOLUM = it_li_vbpa-VOLUM.
*it_final-VOLEH = it_li_vbpa-VOLEH.
wa_final-vgbel = wa_li_vbpa-vgbel.
wa_final-vbeln3 = wa_li_vbpa-vbeln.
*wa_final-PARVW = wa_li_vbpa-PARVW.
wa_final-kunnrb = wa_li_vbpa-kunnrb.
read table it_kna1 into wa_kna1 with key kunnr = wa_li_vbpa-kunnr.
if sy-subrc = 0.
wa_final-name1 = wa_kna1-name1.
wa_final-ort01 = wa_kna1-ort01.
wa_final-adrnr1 = wa_kna1-adrnr.
endif.
read table it_kna1 into wa_kna1 with key kunnr = wa_li_vbpa-kunag.
if sy-subrc = 0.
wa_final-name2 = wa_kna1-name1.
wa_final-ort02 = wa_kna1-ort01.
wa_final-adrnr2 = wa_kna1-adrnr.
endif.
read table it_kna1 into wa_kna1 with key kunnr = wa_li_vbpa-kunnrb.
if sy-subrc = 0.
wa_final-name3 = wa_kna1-name1.
wa_final-ort03 = wa_kna1-ort01.
wa_final-adrnr3 = wa_kna1-adrnr.
endif.
append wa_final to it_final.
clear wa_final.
endloop.
endform. -
Report to find the retainage amount per each supplier site
Hi All
Is there a report to find the retainage amount per each supplier site ?
Regards;Hi.
The Withholding Tax by Supplier Report shows both supplier and site.
Octavio -
How to create reports online on the fly using meta-data.
We have dataset and blank report. How can I create report design on the fly ? so that it will able to display report dataset.
Can someone tell me it is possible or not ? or some reference links....Hello,
This can be certainly done by executing a script written using Report Application Server (RAS) SDK.
Please refer the link : [http://devlibrary.businessobjects.com|http://devlibrary.businessobjects.com] for detailed documentation on the usage of RAS SDK.
Regards,
Chinmay Athavale
Edited by: Chinmay1009 on Jul 27, 2010 3:46 PM -
Distribution of the planned amount
Dear Planning Experts,
I am entering the "Target Amount" for the users for a year.(0CALYEAR)
I want to do a simple calculation to distribute this amount for that employee:
every month ( Amount / 12 )for 0CALMONTH 01/2005,02/2005..
every quarter ( Amount / 4 ) for 0CALQUARTER 1,2,3,4.
Please let me know your thoughts.
Regards,
SubirThanks, few questions on the same track,
I have three key figures which needs to be distributed
for a month, quarter.
1. If I create a planning function of type distribute by key, will all these keys distributed ?
2. In parameter group, 0calmonth value should be calculated dynamically based on current year.
Should I use variables ? Do I have to create 12 variables and specify distribution factor ?
3. For calmonth and calquarter , two parameter groups are needed ?
Thanks for the help,
Regards, -
Down Payment u2013 New functionality in PO - Limit the Planned Amount of DPR
Hi, everybody
I need an assistance with the new transactions for DownPayment Request based on PO (ME2DP and FPDP_CREATE).
We created a PO, in the item detail, tab "Invoice" we planned a Voluntary DP with DownPayment % = 20 %.
In ME2DP it is possible to consult the amount planned for DP.
When the downpayment request is created in F-47 (after run FPDP_CREATE), SAP does not check that limit, SAP allows the user to request a higher amount percentage.
Does anybody know how can we restrict the total amount or % of the downpayment request based on the planned value in PO ?
Ideas will be very appreciated
CarlosDear Carlos,
The behaviour is correct.
It is not check to create a down payment with a higher value as the PO value because in some scenario
it is required. For example to include freight costs or taxes.
Regards,
ian Wong Loke Foong -
How to create reports servers with the same name in two nodes in Reports
Greetings
We are migrating Oracle Application Server 10g (9.0.4) to a better hardware infrastructure with high availability. We want to provide 2 new Oracle Application Server 10g (9.0.4) in High availability and we want to avoid modify the existing forms and reports code, but the code is looking for a specific reports server name when calling reports, but I couldn't create the same reports server name in the both oas machines, I could create the reports server in only one node. I want to create a reports server with the same name in both nodes but it is not possible. I know that there is a procedure to do that in 10.1,2 (Note 437228.1, How to Create Two Reports Servers With the Same Name in the Same Subnet) but I couldn't find the equivalent procedure in 9.0.4.
Anybody kwows how to create a reports server with the same name in two nodes using 10g (9.0.4)
Thanks
Ramiro Ortiz.Hello.
I applied the patch 4092150 on my oas 9.0.4.2 and I modified my rwnetwork.conf file changing the port to 14022 by following the note "How to Create Two Reports Servers With the Same Name in the Same Subnet? [ID 437228.1]" but I am facing the same error rep-56040 "server already exists in the network".
When I run osfind command I get the following information (My reports server is senarep and I want to create it on SNMMBOGOAS10):
osfind: Found 2 agents at port 14000
HOST: SNMVBOGOAS10.sena.red
HOST: SNMVBOGOAS09.sena.red
osfind: There are no OADs running on in your domain.
osfind: There are no Object Implementations registered with OADs.
osfind: Following are the list of Implementations started manually.
HOST: SNMVBOGOAS10.sena.red
REPOSITORY ID: IDL:oracle/reports/server/EngineComm:1.0
OBJECT NAME: senarep2
REPOSITORY ID: IDL:oracle/reports/server/ServerClass:1.0
OBJECT NAME: senarep2
HOST: SNMVBOGOAS09.sena.red
REPOSITORY ID: IDL:oracle/reports/server/EngineComm:1.0
OBJECT NAME: senarep
REPOSITORY ID: IDL:oracle/reports/server/ServerClass:1.0
OBJECT NAME: senarep
Any Ideas? -
Report to extract the total Amount that we spent for materials
Hi Guru's,
I was trying to find a report that gives all the following information by Company Code. Out put should have the following fields:
1)Vendor Name,
2) Vendor Number,
3)Company Code,
4) Payment Terms Code From Vendor Master,
5) Payment Terms Description,
6)Material Number,
7)Material Description and
8) Amount Spend for last 12 months
I would appreciate any inputs on these kind of reports.
Thanks
Nath..........Sridhar,
Thanks for your response but I am not getting Material number using report FBL1N and also I in the amount column I was looking for the total amount (total spent during the whole year) by Vendor, Company Code and Material. I am trying to execute this for three different company codes. So, will FBL1N work for us to get these total amounts.
Thanks
Nath -
Create report output to the Client of the Application Server inst.of Server
Hi,
Please suggest the soution for the below:
We are using SET_REPORT_OBJECT_PROPERTY and WEB.SHOW_DOCUMENT to create report. Now Requirement is to save the report output to Client instead of server. I tried to use WEBUTIL but web util can be used from form only becuase that is using form item.
(1) We are calling all our report from a form. Is there any option to trigger a action when ever a report job is created in Application server (report server)
(2) Please let me now is there any option to create the output directly to client of application server 10G R1WIN , 10GR2WIN or in 11G. If yes please let me know the details.
Wtih Thanks & Regards
K.Sundar
Edited by: 870860 on Jul 13, 2011 10:27 PMHi,
Please suggest the soution for the below:
We are using SET_REPORT_OBJECT_PROPERTY and WEB.SHOW_DOCUMENT to create report. Now Requirement is to save the report output to Client instead of server. I tried to use WEBUTIL but web util can be used from form only becuase that is using form item.
(1) We are calling all our report from a form. Is there any option to trigger a action when ever a report job is created in Application server (report server)
(2) Please let me now is there any option to create the output directly to client of application server 10G R1WIN , 10GR2WIN or in 11G. If yes please let me know the details.
Wtih Thanks & Regards
K.Sundar
Edited by: 870860 on Jul 13, 2011 10:27 PM -
Profit center report showing double the plan value comparing to cost center
Dear Friends,
We have an issue with the profit center report wherein we have maintained forecast value in version 2 in cost centers and when we run profit center report the values are showing double the value which we maintained in cost centers. Is this the problem in running 1KE0 transaction.?. We have run 1KE0 to update the missing value by deleting the existing values, so few profit center report is corrected but many other profit center report has gone wrong.
Could you please guide me to correct the values. Business requires to see the same value in cost and profit center. Note; We have created cost and profit centers the same code and assigned to each other.
Thanks,
LokeshNo answers yet
-
How can create report to get the all SAP transactions available to CSRs
Hi,
The user like to have the format of report as follows:
SAP transactions Transaction desription CSR 1 CSR 2 CSR 3 u2026etc.
VA01 order entry Yes No No
VA02 order change Yes No No
VA03 order display Yes Yes No
u2026etc.
( Of course the above entries donu2019t make any sense as u2013 Itu2019s just an example )
1) I think CSR means Customer Service Representative, where it is residing means in which table ?or How can I get CSR1,CSR2.....?
2)How can I get the all SAP transactions available to CSRs ?(first column)
3)How to find the which transaction is available to CSRs ? so that I can mark it is as Yes else NOI am not able to show the correct format as all get mixed when I post thread:
SAP transactions Transaction desription CSR 1 CSR 2 CSR 3 u2026etc.
VA01 order entry Yes No No
VA02 order change Yes No No
VA03 order display Yes Yes No
u2026etc.
( Of course the above entries donu2019t make any sense as u2013 Itu2019s just an example )
First column is Sap transactins,
second column is Transaction description
third column is CSR1,
fourth column is CSR2,
and soon.
In the first column I need to display list of all sap transactions available to CSR,
In the second column I need to display the transaction description
from third onwords I need to display CSR1
in fourth CSR2 and soon .
Please let me know for any questions,I appreciate for the reply . -
Depreciation - Planned amount calculation
Dear gurus,
I had a problem on SAP planned amount calculation as follow:
Asset acquisition value: 10.000.000
Use life: 3 years (36 months)
In AW01N, the planned amounts are:
Prd1: 277.778-
Prd2: 277.778-
Prd3: 277.777-
Prd4: 277.778-
I want the planned amount of Period 3 is just the same as the others (277.778-). Would you please help me solve this problem?
Thank you very muchHi
Goi to Tr. Code OAYO
Select check Box - Net Book Value at year end.
Select Arthimatic rounding
Thanks
Anil -
What is the functionality to create report tree for copa reports
Dear Fellow members,
Good day to you!
I would need your advise on how to create report tree for the list of COPA reports created by users in Production. Note that currently power user is using KE30 to create these reports. Due to its sensitivity, I need to prevent users from knowing the list of reports created. Basically just wanted to allow user to execute the few copa reports revelent to his area like Channel P&L.
Many thanks in advance & cheers.. !
from ElaineDear Mohammed azam
Thanks for your reply.
Before i can create the menu tree, i need to create the same report name and form name in DEV client, create the report tree with this report name. The report name & form name not necessary have to be t same format at the one in production client. meaning, you can create just a row and a column. That's it you can perform the normal landscape of transporting the report tree to QAS & PRD.
Thanks & cheers !
elaine -
Change Log Details for the Planning Profiles in CRM
Hi All,
We are getting the Planning data from CRM Planning Profiles into BW BPS - 0CRM_C01 Real Time InfoCube.
The Users got a new requirement and they need the following additional details:
1. User who modified the amount in a particular Planning Profile.
2. Date and Time when the Planning Amount has been modified.
3. Differential Amount. (Between Earlier Planning Amount and Planning Amount that was entered now)
In one statement, User needs all the change log details in Planning Amount to be flown to BW and saved so that he can report.
How to create this setup.?
Can the same Real Time InfoCube 0CRM_C01 be used to save this information ?
How to configure the system in Planning Layouts to capture User/Time Stamp/Amount Details.
Any inputs in this regarding will be greatly appreciated.
Regards
RYHi Kumar,
Upload com.sap.logon.runtime.par(logon page .par file) into the portal.
problem will be solved..
regards
Nizam -
How to know the stake amount of both the won and lost opportunities
Hi,
I need to create a report.
I would like to have a chart related to the last year opportunities.
I would like to know in the same reports, the stake amount of the opportunities with the sales stage = Closed/Won, the stake amount of the opportunities Won + Lost (without the stake amount of the open opportunities).
And I would like to create a third field to calculate:
==> Stake Amount Won / (Stake Amount Won + Stake Amount Lost)
I create a formula inside the stake amount to put 0 if the sales stage <> closed/won and the real value of the stake
amount when the sales stage = closed/won. In my report I see the value "0" for opportunites <> Won but when I ask for the grand total, the system give me the results of the stake amount of all the opportunities.
Do you know how to design this report?
Regards,Hi Venky
For the moment I can't create a formula for my needs. I'm going to try to use Union analysis.
I would like to make
- a first report which give me the stake amount *(1)* of all the opportunities with a sales stage=closed/won.
- a second report which give me the stake amount of all the opportunities *(2)* with a sales stage = closed/lost and closed/won
- a consolidated report where I can use the results of the 3 previous reports and make formula based on those results.
formula = *(1) / (2)*
Do you think it is possible to create formula based on the results of two reports?
Regards,
Maybe you are looking for
-
HP LaserJet 3300 Printer & OS 10.6 compatible?
Currently running OS 10.5.8. The HP LaserJet 3300 printer/scanner is connected via USB to iMAC and prints OK. Previous OS upgrades have generally caused problems with this printer. If upgrade to OS 10.6, is the printer going to work, or what needs to
-
Hi, I have been trying to set up streams in oracle 9.2.0.4. i have been able to set up the capture , propagate and apply processes. The problem is that the capture process works fine but the propagate process gives errors. The code for the process is
-
I can not monitor Xmod to monitor ( the firmware update doesn't work on my ca
I have a problem I can not monitor Xmod to monitor the sound when I use line-in to record,even if I have already update my firm ware.actually the main reason I bought this sound card is my laptop very noisy when recording ,so I hope I can get a usb s
-
This week, I have been unable to connect to the iTMS. Up until Tuesday, everything worked just fine. I have internet access and all other applications that need internet are working. All other parts of iTunes are working. The error message reads "iTu
-
IPAD2 (w/Verizon) Question - use in Europe
My wife recently purchased an IPAD2 - with the Verizon carrier feature. She will be traveling to Europe in a few weeks. I understand that the Verizon IPADs require some add-on feature for compatability in Europe. Can anyone advise me further (i.e.