Desktop.debug: exceptions messages

Alex and Raju,
i tried 2 sequence :
1) If i run the custom auth module (which is using a java Class in /etc/opt/SUNWps/desktop/classes), without adding the the classpath in jvm12.conf -> i get no error messages in both auth logs and desktop logs;
Here my Authentication not getting complete - i get auth failed error; But i can acess the java class under /etc/... - i see that in my debug logs.
2) If i do the same by adding the classpath in the jvm12.conf,
a) I can access my java class ( i see it from the debug messages)
b) I can bale to login and go to desktop - But the desktop is empty with just my default container (MyFrontPageTabContainer..)
c) And i got the following desktop.debug exceptions....
questions :
If i need to access the classes under /etc/opt/SUNWps/desktop/classes/... in the classes under /opt/SUNWam/lib/... what is the usual procedure ?
regards,
Vee
11/07/2003 11:01:14:141 AM EET: Thread[Thread-36,5,main]
ERROR: PSContainerProviderContext.initProvider()
java.lang.NoClassDefFoundError: com/sun/portal/providers/jsp/JSPProvider
at java.lang.ClassLoader.defineClass0(Native Method)
at java.lang.ClassLoader.defineClass(ClassLoader.java:488)
at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:106)
at java.net.URLClassLoader.defineClass(URLClassLoader.java:243)
at java.net.URLClassLoader.access$100(URLClassLoader.java:51)
at java.net.URLClassLoader$1.run(URLClassLoader.java:190)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:183)
at java.lang.ClassLoader.loadClass(ClassLoader.java:294)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:281)
at java.lang.ClassLoader.loadClass(ClassLoader.java:250)
at java.lang.ClassLoader.findSystemClass(ClassLoader.java:652)
at com.iplanet.server.http.servlet.NSServletLoader.findClass(NSServletLoader.java:152)
at com.iplanet.server.http.servlet.NSServletLoader.loadClass(NSServletLoader.java:108)
at java.lang.ClassLoader.loadClass(ClassLoader.java:287)
at java.lang.ClassLoader.loadClass(ClassLoader.java:250)
at com.sun.portal.desktop.context.ProviderClassLoader.<init>(ProviderClassLoader.java:60)
at com.sun.portal.desktop.context.PSContainerProviderContext.initProvider(PSContainerProviderContext.java:209)
at com.sun.portal.desktop.context.PSContainerProviderContext.getProvider(PSContainerProviderContext.java:159)
at com.sun.portal.providers.containers.JSPContainerProviderAdapter.getRefreshTime(JSPContainerProviderAdapter.java:114)
at com.sun.portal.providers.containers.JSPContainerProviderAdapter.getRefreshTime(JSPContainerProviderAdapter.java:118)
at com.sun.portal.desktop.context.PSContainerProviderContext.getContent(PSContainerProviderContext.java:348)
at com.sun.portal.desktop.context.PSDesktopContext.getContent(PSDesktopContext.java:957)
at com.sun.portal.desktop.DesktopServlet.doGetPost(DesktopServlet.java:492)
at com.sun.portal.desktop.DesktopServlet.service(DesktopServlet.java:306)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.iplanet.server.http.servlet.WFilterChain.doFilter(WFilterChain.java:144)
at com.sun.portal.yahoo.YahooDTFilter.doFilter(YahooDTFilter.java:137)
at com.iplanet.server.http.servlet.WebApplication.serviceServletFilters(WebApplication.java:1105)
at com.iplanet.server.http.servlet.WebApplication.service(WebApplication.java:1063)
at com.iplanet.server.http.servlet.NSServletRunner.ServiceWebApp(NSServletRunner.java:981)
11/07/2003 11:01:14:144 AM EET: Thread[Thread-36,5,main]
ERROR: ContainerProviderAdapter.getRefreshTime(): invalid channel MyChannel
11/07/2003 11:01:16:806 AM EET: Thread[Thread-36,5,main]
ERROR: PSContainerProviderContext.initProvider()
java.lang.NoClassDefFoundError: com/sun/portal/providers/jsp/JSPProvider
at java.lang.ClassLoader.defineClass0(Native Method)
at java.lang.ClassLoader.defineClass(ClassLoader.java:488)
at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:106)
at java.net.URLClassLoader.defineClass(URLClassLoader.java:243)
at java.net.URLClassLoader.access$100(URLClassLoader.java:51)
at java.net.URLClassLoader$1.run(URLClassLoader.java:190)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:183)
at java.lang.ClassLoader.loadClass(ClassLoader.java:294)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:281)
at java.lang.ClassLoader.loadClass(ClassLoader.java:250)
at java.lang.ClassLoader.findSystemClass(ClassLoader.java:652)
at com.iplanet.server.http.servlet.NSServletLoader.findClass(NSServletLoader.java:152)
at com.iplanet.server.http.servlet.NSServletLoader.loadClass(NSServletLoader.java:108)
at java.lang.ClassLoader.loadClass(ClassLoader.java:287)
at java.lang.ClassLoader.loadClass(ClassLoader.java:250)
at com.sun.portal.desktop.context.ProviderClassLoader.<init>(ProviderClassLoader.java:60)
at com.sun.portal.desktop.context.PSContainerProviderContext.initProvider(PSContainerProviderContext.java:209)
at com.sun.portal.desktop.context.PSContainerProviderContext.getProvider(PSContainerProviderContext.java:159)
at com.sun.portal.providers.containers.JSPContainerProviderAdapter.getRefreshTime(JSPContainerProviderAdapter.java:114)
at com.sun.portal.desktop.context.PSContainerProviderContext.getContent(PSContainerProviderContext.java:348)
at com.sun.portal.desktop.taglib.containerProviderContext.GetContentTag.doStartTag(GetContentTag.java:33)
at jsps.etc._opt._SUNWps._desktop._default_en_US._JSPTabContainer._html._tab_jsp._jspService(_tab_jsp.java:783)
at com.sun.portal.providers.jsp.jasper3.jasper.runtime.HttpJspBase.service(HttpJspBase.java:119)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sun.portal.providers.jsp.JspServletWrapper.service(JspServletWrapper.java:182)
at com.sun.portal.providers.jsp.JSPProvider.processJspFile(JSPProvider.java:695)
at com.sun.portal.providers.jsp.JSPProvider.processJspFile(JSPProvider.java:674)
at com.sun.portal.providers.jsp.JSPProvider.getContent(JSPProvider.java:473)
at com.sun.portal.providers.containers.jsp.tab.JSPTabContainerProvider.getContent(JSPTabContainerProvider.java:532)
at com.sun.portal.desktop.context.PSContainerProviderContext.getContent(PSContainerProviderContext.java:367)
at com.sun.portal.desktop.context.PSDesktopContext.getContent(PSDesktopContext.java:957)
at com.sun.portal.desktop.DesktopServlet.doGetPost(DesktopServlet.java:492)
at com.sun.portal.desktop.DesktopServlet.service(DesktopServlet.java:306)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.iplanet.server.http.servlet.WFilterChain.doFilter(WFilterChain.java:144)
at com.sun.portal.yahoo.YahooDTFilter.doFilter(YahooDTFilter.java:137)
at com.iplanet.server.http.servlet.WebApplication.serviceServletFilters(WebApplication.java:1105)
at com.iplanet.server.http.servlet.WebApplication.service(WebApplication.java:1063)
at com.iplanet.server.http.servlet.NSServletRunner.ServiceWebApp(NSServletRunner.java:981)
11/07/2003 11:01:16:809 AM EET: Thread[Thread-36,5,main]
ERROR: ContainerProviderAdapter.getRefreshTime(): invalid channel MyChannel
11/07/2003 11:01:17:335 AM EET: Thread[Thread-36,5,main]
ERROR: PSContainerProviderContext.initProvider()
java.lang.NoClassDefFoundError: com/sun/portal/providers/jsp/JSPProvider
at java.lang.ClassLoader.defineClass0(Native Method)
at java.lang.ClassLoader.defineClass(ClassLoader.java:488)
at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:106)
at java.net.URLClassLoader.defineClass(URLClassLoader.java:243)
at java.net.URLClassLoader.access$100(URLClassLoader.java:51)
at java.net.URLClassLoader$1.run(URLClassLoader.java:190)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:183)
at java.lang.ClassLoader.loadClass(ClassLoader.java:294)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:281)
at java.lang.ClassLoader.loadClass(ClassLoader.java:250)
at java.lang.ClassLoader.findSystemClass(ClassLoader.java:652)
at com.iplanet.server.http.servlet.NSServletLoader.findClass(NSServletLoader.java:152)
at com.iplanet.server.http.servlet.NSServletLoader.loadClass(NSServletLoader.java:108)
at java.lang.ClassLoader.loadClass(ClassLoader.java:287)
at java.lang.ClassLoader.loadClass(ClassLoader.java:250)
at com.sun.portal.desktop.context.ProviderClassLoader.<init>(ProviderClassLoader.java:60)
at com.sun.portal.desktop.context.PSContainerProviderContext.initProvider(PSContainerProviderContext.java:209)
at com.sun.portal.desktop.context.PSContainerProviderContext.getProvider(PSContainerProviderContext.java:159)
at com.sun.portal.desktop.context.PSContainerProviderContext.getContent(PSContainerProviderContext.java:418)
at com.sun.portal.desktop.taglib.container.table.GetContentTag.doStartTag(GetContentTag.java:43)
at jsps.etc._opt._SUNWps._desktop._default_en_US._MyFrontPageTabPanelContainer._html._tabtable_jsp._jspService(_tabtable_jsp.java:373)
at com.sun.portal.providers.jsp.jasper3.jasper.runtime.HttpJspBase.service(HttpJspBase.java:119)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sun.portal.providers.jsp.JspServletWrapper.service(JspServletWrapper.java:182)
at com.sun.portal.providers.jsp.JSPProvider.processJspFile(JSPProvider.java:695)
at com.sun.portal.providers.jsp.JSPProvider.processJspFile(JSPProvider.java:674)
at com.sun.portal.providers.jsp.JSPProvider.getContent(JSPProvider.java:473)
at com.sun.portal.desktop.context.PSContainerProviderContext.getContent(PSContainerProviderContext.java:367)
at com.sun.portal.desktop.taglib.containerProviderContext.GetContentTag.doStartTag(GetContentTag.java:33)
at jsps.etc._opt._SUNWps._desktop._default_en_US._JSPTabContainer._html._tab_jsp._jspService(_tab_jsp.java:783)
at com.sun.portal.providers.jsp.jasper3.jasper.runtime.HttpJspBase.service(HttpJspBase.java:119)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sun.portal.providers.jsp.JspServletWrapper.service(JspServletWrapper.java:182)
at com.sun.portal.providers.jsp.JSPProvider.processJspFile(JSPProvider.java:695)
at com.sun.portal.providers.jsp.JSPProvider.processJspFile(JSPProvider.java:674)
at com.sun.portal.providers.jsp.JSPProvider.getContent(JSPProvider.java:473)
at com.sun.portal.providers.containers.jsp.tab.JSPTabContainerProvider.getContent(JSPTabContainerProvider.java:532)
at com.sun.portal.desktop.context.PSContainerProviderContext.getContent(PSContainerProviderContext.java:367)
at com.sun.portal.desktop.context.PSDesktopContext.getContent(PSDesktopContext.java:957)
at com.sun.portal.desktop.DesktopServlet.doGetPost(DesktopServlet.java:492)
at com.sun.portal.desktop.DesktopServlet.service(DesktopServlet.java:306)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.iplanet.server.http.servlet.WFilterChain.doFilter(WFilterChain.java:144)
at com.sun.portal.yahoo.YahooDTFilter.doFilter(YahooDTFilter.java:137)
at com.iplanet.server.http.servlet.WebApplication.serviceServletFilters(WebApplication.java:1105)
at com.iplanet.server.http.servlet.WebApplication.service(WebApplication.java:1063)
at com.iplanet.server.http.servlet.NSServletRunner.ServiceWebApp(NSServletRunner.java:981)
11/07/2003 11:01:17:531 AM EET: Thread[Thread-36,5,main]
ERROR: PSContainerProviderContext.initProvider()
java.lang.NoClassDefFoundError: com/sun/portal/providers/jsp/JSPProvider
at java.lang.ClassLoader.defineClass0(Native Method)
at java.lang.ClassLoader.defineClass(ClassLoader.java:488)
at java.security.SecureClassLoader.defineClass(SecureClassLoader.java:106)
at java.net.URLClassLoader.defineClass(URLClassLoader.java:243)
at java.net.URLClassLoader.access$100(URLClassLoader.java:51)
at java.net.URLClassLoader$1.run(URLClassLoader.java:190)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(URLClassLoader.java:183)
at java.lang.ClassLoader.loadClass(ClassLoader.java:294)
at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:281)
at java.lang.ClassLoader.loadClass(ClassLoader.java:250)
at java.lang.ClassLoader.findSystemClass(ClassLoader.java:652)
at com.iplanet.server.http.servlet.NSServletLoader.findClass(NSServletLoader.java:152)
at com.iplanet.server.http.servlet.NSServletLoader.loadClass(NSServletLoader.java:108)
at java.lang.ClassLoader.loadClass(ClassLoader.java:287)
at java.lang.ClassLoader.loadClass(ClassLoader.java:250)
at com.sun.portal.desktop.context.ProviderClassLoader.<init>(ProviderClassLoader.java:60)
at com.sun.portal.desktop.context.PSContainerProviderContext.initProvider(PSContainerProviderContext.java:209)
at com.sun.portal.desktop.context.PSContainerProviderContext.getProvider(PSContainerProviderContext.java:159)
at com.sun.portal.providers.util.ProviderOrder.order(ProviderOrder.java:77)
at com.sun.portal.providers.containers.jsp.table.JSPTableContainerProvider.setupColumns(JSPTableContainerProvider.java:179)
at com.sun.portal.desktop.taglib.container.table.GetColumnsTag.getColumnMap(GetColumnsTag.java:60)
at com.sun.portal.desktop.taglib.container.table.GetColumnsTag.doStartTag(GetColumnsTag.java:47)
at jsps.etc._opt._SUNWps._desktop._default_en_US._MyFrontPageTabPanelContainer._html._tabtable_jsp._jspService(_tabtable_jsp.java:450)
at com.sun.portal.providers.jsp.jasper3.jasper.runtime.HttpJspBase.service(HttpJspBase.java:119)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sun.portal.providers.jsp.JspServletWrapper.service(JspServletWrapper.java:182)
at com.sun.portal.providers.jsp.JSPProvider.processJspFile(JSPProvider.java:695)
at com.sun.portal.providers.jsp.JSPProvider.processJspFile(JSPProvider.java:674)
at com.sun.portal.providers.jsp.JSPProvider.getContent(JSPProvider.java:473)
at com.sun.portal.desktop.context.PSContainerProviderContext.getContent(PSContainerProviderContext.java:367)
at com.sun.portal.desktop.taglib.containerProviderContext.GetContentTag.doStartTag(GetContentTag.java:33)
at jsps.etc._opt._SUNWps._desktop._default_en_US._JSPTabContainer._html._tab_jsp._jspService(_tab_jsp.java:783)
at com.sun.portal.providers.jsp.jasper3.jasper.runtime.HttpJspBase.service(HttpJspBase.java:119)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sun.portal.providers.jsp.JspServletWrapper.service(JspServletWrapper.java:182)
at com.sun.portal.providers.jsp.JSPProvider.processJspFile(JSPProvider.java:695)
at com.sun.portal.providers.jsp.JSPProvider.processJspFile(JSPProvider.java:674)
at com.sun.portal.providers.jsp.JSPProvider.getContent(JSPProvider.java:473)
at com.sun.portal.providers.containers.jsp.tab.JSPTabContainerProvider.getContent(JSPTabContainerProvider.java:532)
at com.sun.portal.desktop.context.PSContainerProviderContext.getContent(PSContainerProviderContext.java:367)
at com.sun.portal.desktop.context.PSDesktopContext.getContent(PSDesktopContext.java:957)
at com.sun.portal.desktop.DesktopServlet.doGetPost(DesktopServlet.java:492)
at com.sun.portal.desktop.DesktopServlet.service(DesktopServlet.java:306)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.iplanet.server.http.servlet.WFilterChain.doFilter(WFilterChain.java:144)
at com.sun.portal.yahoo.YahooDTFilter.doFilter(YahooDTFilter.java:137)
at com.iplanet.server.http.servlet.WebApplication.serviceServletFilters(WebApplication.java:1105)
at com.iplanet.server.http.servlet.WebApplication.service(WebApplication.java:1063)
at com.iplanet.server.http.servlet.NSServletRunner.ServiceWebApp(NSServletRunner.java:981)

It is important to understand the difference:
Login module is part of Identity server
and a channel belongs to portal server.
Now, your authmodule needs implementor class in the classpath.
/etc/.../desktop/classes will be not auto-loaded by identity server.
And this class don't have to be in /etc/.../desktop/classes it can be e.g. in /opt/SUNWam/lib/
Further there is no need to investigate first case:
if implementor class is not in CP - your authmodule will fail!
Put your class in a different directory and try only the second case with class reference in CP.
Also I am curious why you are referencing Authmodule in your channel?!
Cheers,
Alex :-)

Similar Messages

Exception Message: TF270015: 'MSBuild.exe' returned an unexpected exit code. Expected '0'; actual '1'. See the build logs for more details. (type UnexpectedExitCodeException)

Hi all,
I have TFS2012 and run several projects.
We encounterwed with such an error while using Build server.
Overall Build Process
Initial Property Values
AgentSettings = Use agent where Name=* and Tags is empty; Max Wait Time: 04:00:00
BinariesSubdirectory =
ConfigurationFolderPath = $/CTI/DEV/DEV_INT/source/TeamBuildTypes/EPhone_DIT
DoNotDownloadBuildType = False
LogFilePerProject = False
MSBuildArguments =
MSBuildPlatform = Auto
RecursionType = OneLevel
SourcesSubdirectory =
TestResultsSubdirectory =
Verbosity = Diagnostic
00:00
Get the Build
00:00
Update Build Number
Initial Property Values
BuildNumberFormat = $(BuildDefinitionName)_$(Date:yyyyMMdd)$(Rev:.r)
Final Property Values
BuildNumberFormat = $(BuildDefinitionName)_$(Date:yyyyMMdd)$(Rev:.r)
Result = Ephone_DIT_Deploy_20150424.1
01:56
Run On Agent (reserved build agent U4VMDWODBDEV03 - Agent1)
Initial Property Values
MaxExecutionTime = 00:00:00
MaxWaitTime = 04:00:00
ReservationSpec = Name=*, Tags=
00:00
Get the Build Directory
Initial Property Values
Result = d:\temp\217\CTI\Ephone_DIT_Deploy
01:53
If Not String.IsNullOrEmpty(ConfigurationFolderPath)
Initial Property Values
Condition = True
01:53
Run TfsBuild for Configuration Folder
Initial Property Values
BinariesSubdirectory =
BuildDirectory = d:\temp\217\CTI\Ephone_DIT_Deploy
CommandLineArguments =
ConfigurationFolderPath = $/CTI/DEV/DEV_INT/source/TeamBuildTypes/EPhone_DIT
DoNotDownloadBuildType = False
LogFilePerProject = False
MaxProcesses = 1
NodeReuse = False
RecursionType = OneLevel
SourcesSubdirectory =
TargetsNotLogged =
TestResultsSubdirectory =
ToolPath =
ToolPlatform = Auto
Verbosity = Diagnostic
C:\Windows\Microsoft.NET\Framework64\v4.0.30319\MSBuild.exe /nologo /noconsolelogger "d:\temp\217\CTI\Ephone_DIT_Deploy\BuildType\TFSBuild.proj" /m:1 /nr:False "@d:\temp\217\CTI\Ephone_DIT_Deploy\BuildType\TfsBuild.rsp"
00:08
Getting sources
00:02
Labeling sources
00:19
Built $/CTI/DEV/DEV_INT/source/TeamBuildTypes/EPhone_DIT/TFSBuild.proj for target(s) CompileConfiguration.
00:19
Built $/CTI/DEV/DEV_INT/source/TeamBuildTypes/EPhone_DIT/TFSBuild.proj for target(s) CompileSolution.
00:19
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone.sln for default targets.
00:05
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Protocol/Communications.Protocol.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/CTIException/CTIException.csproj for default targets.
CSC: Assembly generation -- Referenced assembly 'System.Data.dll' targets a different processor
00:01
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone/EPhone.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/ChannelIntegrator/Common/Common.csproj for default targets.
CSC: Assembly generation -- Referenced assembly 'System.Data.dll' targets a different processor
CSC: Assembly generation -- Referenced assembly 'System.Data.dll' targets a different processor
CSC: Assembly generation -- Referenced assembly 'System.Data.dll' targets a different processor
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/CTIException/CTIException.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/ChannelIntegrator/Common/Common.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone/EPhone.csproj for default targets.
00:10
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Softphone/Communications.Softphone.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Protocol/Communications.Protocol.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/CTIException/CTIException.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone/EPhone.csproj for default targets.
00:01
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Protocol.Proxy/Communications.Protocol.Proxy.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Protocol/Communications.Protocol.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Protocol.CTIOS/Communications.Protocol.CTIOS.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Protocol/Communications.Protocol.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/CTIException/CTIException.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone/EPhone.csproj for default targets.
CSC: Assembly generation -- Referenced assembly 'System.Data.dll' targets a different processor
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Softphone.DelphiCallConn/Communications.Protocol.DelphiCallConn.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Protocol/Communications.Protocol.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone/EPhone.csproj for default targets.
CSC: Assembly generation -- Referenced assembly 'System.Data.dll' targets a different processor
CSC: Assembly generation -- Referenced assembly 'System.Data.dll' targets a different processor
00:05
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone.DataModel/EPhone.DataModel.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/ChannelIntegrator/Common/Common.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone/EPhone.csproj for default targets.
00:02
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/ChannelIntegrator/ChannelIntegrator/ChannelIntegrator.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/ChannelIntegrator/Common/Common.csproj for default targets.
CSC: Assembly generation -- Referenced assembly 'System.Data.dll' targets a different processor
CSC: Assembly generation -- Referenced assembly 'System.EnterpriseServices.dll' targets a different processor
CSC: Assembly generation -- Referenced assembly 'System.Web.dll' targets a different processor
CSC: Assembly generation -- Referenced assembly 'System.Data.dll' targets a different processor
CSC: Assembly generation -- Referenced assembly 'System.EnterpriseServices.dll' targets a different processor
CSC: Assembly generation -- Referenced assembly 'System.Web.dll' targets a different processor
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone.Workflow.Interface/EPhone.Workflow.Interface.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone/EPhone.csproj for default targets.
C:\Windows\Microsoft.NET\Framework64\v4.0.30319\Microsoft.Common.targets (1605): There was a mismatch between the processor architecture of the project being built "MSIL" and the processor architecture of the reference "d:\temp\217\CTI\Ephone_DIT_Deploy\Binaries\Debug\EPhone.dll",
"x86". This mismatch may cause runtime failures. Please consider changing the targeted processor architecture of your project through the Configuration Manager so as to align the processor architectures between your project and references, or take
a dependency on references with a processor architecture that matches the targeted processor architecture of your project.
00:02
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Ephone.Workflow/EPhone.Workflow.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone.DataModel/EPhone.DataModel.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone/EPhone.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone.Workflow.Interface/EPhone.Workflow.Interface.csproj for default targets.
00:01
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhoneReporting/EPhoneReporting.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone.DataModel/EPhone.DataModel.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone/EPhone.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone.Workflow.Interface/EPhone.Workflow.Interface.csproj for default targets.
C:\Windows\Microsoft.NET\Framework64\v4.0.30319\Microsoft.Common.targets (1605): There was a mismatch between the processor architecture of the project being built "MSIL" and the processor architecture of the reference "d:\temp\217\CTI\Ephone_DIT_Deploy\Binaries\Debug\EPhone.DataModel.dll",
"x86". This mismatch may cause runtime failures. Please consider changing the targeted processor architecture of your project through the Configuration Manager so as to align the processor architectures between your project and references, or take
a dependency on references with a processor architecture that matches the targeted processor architecture of your project.
C:\Windows\Microsoft.NET\Framework64\v4.0.30319\Microsoft.Common.targets (1605): There was a mismatch between the processor architecture of the project being built "MSIL" and the processor architecture of the reference "d:\temp\217\CTI\Ephone_DIT_Deploy\Binaries\Debug\EPhone.dll",
"x86". This mismatch may cause runtime failures. Please consider changing the targeted processor architecture of your project through the Configuration Manager so as to align the processor architectures between your project and references, or take
a dependency on references with a processor architecture that matches the targeted processor architecture of your project.
C:\Windows\Microsoft.NET\Framework64\v4.0.30319\Microsoft.Common.targets (1605): There was a mismatch between the processor architecture of the project being built "MSIL" and the processor architecture of the reference "d:\temp\217\CTI\Ephone_DIT_Deploy\Binaries\Debug\EPhone.DataModel.dll",
"x86". This mismatch may cause runtime failures. Please consider changing the targeted processor architecture of your project through the Configuration Manager so as to align the processor architectures between your project and references, or take
a dependency on references with a processor architecture that matches the targeted processor architecture of your project.
C:\Windows\Microsoft.NET\Framework64\v4.0.30319\Microsoft.Common.targets (1605): There was a mismatch between the processor architecture of the project being built "MSIL" and the processor architecture of the reference "d:\temp\217\CTI\Ephone_DIT_Deploy\Binaries\Debug\EPhone.dll",
"x86". This mismatch may cause runtime failures. Please consider changing the targeted processor architecture of your project through the Configuration Manager so as to align the processor architectures between your project and references, or take
a dependency on references with a processor architecture that matches the targeted processor architecture of your project.
C:\Windows\Microsoft.NET\Framework64\v4.0.30319\Workflow.Targets (121): Compilation failed. Unable to load one or more of the requested types. Retrieve the LoaderExceptions property for more information.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhoneReporting/EPhoneReporting.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhoneCallback/EPhoneCallback.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone.DataModel/EPhone.DataModel.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone/EPhone.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone.Workflow.Interface/EPhone.Workflow.Interface.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Ephone.Workflow/EPhone.Workflow.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Protocol.CTIOS/Communications.Protocol.CTIOS.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Softphone.DelphiCallConn/Communications.Protocol.DelphiCallConn.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Protocol.Proxy/Communications.Protocol.Proxy.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/ChannelIntegrator/ChannelIntegrator/ChannelIntegrator.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone.DataModel/EPhone.DataModel.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone.Workflow.Interface/EPhone.Workflow.Interface.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhoneReporting/EPhoneReporting.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Ephone.Workflow/EPhone.Workflow.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhoneCallback/EPhoneCallback.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhoneUserControl/EPhoneUserControl.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Protocol/Communications.Protocol.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Softphone/Communications.Softphone.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/CTIException/CTIException.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/ChannelIntegrator/Common/Common.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/ChannelIntegrator/ChannelIntegrator/ChannelIntegrator.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone.DataModel/EPhone.DataModel.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone/EPhone.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhoneMarcomApplication/EPhoneMarcomApplication.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhoneUserControl/EPhoneUserControl.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhoneCallbackApplication/EPhoneCallbackApplication.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhoneUserControl/EPhoneUserControl.csproj for default targets.
00:02
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhoneQueView/EPhoneQueView.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone.DataModel/EPhone.DataModel.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone/EPhone.csproj for default targets.
C:\Windows\Microsoft.NET\Framework64\v4.0.30319\Microsoft.Common.targets (1605): There was a mismatch between the processor architecture of the project being built "MSIL" and the processor architecture of the reference "d:\temp\217\CTI\Ephone_DIT_Deploy\Binaries\Debug\EPhone.DataModel.dll",
"x86". This mismatch may cause runtime failures. Please consider changing the targeted processor architecture of your project through the Configuration Manager so as to align the processor architectures between your project and references, or take
a dependency on references with a processor architecture that matches the targeted processor architecture of your project.
C:\Windows\Microsoft.NET\Framework64\v4.0.30319\Microsoft.Common.targets (1605): There was a mismatch between the processor architecture of the project being built "MSIL" and the processor architecture of the reference "d:\temp\217\CTI\Ephone_DIT_Deploy\Binaries\Debug\EPhone.dll",
"x86". This mismatch may cause runtime failures. Please consider changing the targeted processor architecture of your project through the Configuration Manager so as to align the processor architectures between your project and references, or take
a dependency on references with a processor architecture that matches the targeted processor architecture of your project.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Ephone.Tests/Ephone.Tests.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/ChannelIntegrator/ChannelIntegrator/ChannelIntegrator.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/ChannelIntegrator/Common/Common.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Softphone/Communications.Softphone.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone.DataModel/EPhone.DataModel.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone/EPhone.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Ephone.Tests.CallGenerator/EPhone.Tests.CallGenerator.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Protocol/Communications.Protocol.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Softphone/Communications.Softphone.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone/EPhone.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Protocol.CTIOS.TestRunner/Communications.Protocol.CTIOS.TestRunner.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Protocol/Communications.Protocol.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/CTIException/CTIException.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone/EPhone.csproj for default targets.
CSC: Assembly generation -- Referenced assembly 'System.Data.dll' targets a different processor
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Protocol.CTIOS.TestRunner/Communications.Protocol.CTIOS.TestRunner.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Ephone.Tests.CallGenerator/EPhone.Tests.CallGenerator.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Ephone.Tests.Runner/Ephone.Tests.Runner.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/ChannelIntegrator/Common/Common.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone.DataModel/EPhone.DataModel.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Ephone.Tests/Ephone.Tests.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone/EPhone.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhoneIDD/EPhoneIDD.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/Communications.Softphone/Communications.Softphone.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone.DataModel/EPhone.DataModel.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/EPhone/EPhone.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/ChannelIntegrator/ChannelIntegratorTest/ChannelIntegratorTest.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/ChannelIntegrator/Common/Common.csproj for default targets.
00:00
Built $/CTI/DEV/DEV_INT/source/EPhone/Development/EPhone/ChannelIntegrator/ChannelIntegrator/ChannelIntegrator.csproj for default targets.
CSC: Assembly generation -- Referenced assembly 'System.Data.dll' targets a different processor
MSBuild Log File
00:08
Generating list of changesets
00:20
Built Skins\SkinEPhone.cs for default targets.
Skins\SkinEPhone.cs (3838): The member 'EPhone.SkinEPhone._txtOrderNumber_TextChanged(object, System.EventArgs)' does not hide an inherited member. The new keyword is not required. [d:\temp\217\CTI\Ephone_DIT_Deploy\Sources\EPhoneUserControl\EPhoneUserControl.csproj]
C:\Windows\Microsoft.NET\Framework\v4.0.30319\Microsoft.Common.targets (3201): Unable to apply publish properties for item "microsoft.vbe.interop". [d:\temp\217\CTI\Ephone_DIT_Deploy\Sources\EPhoneWinForm\EPhoneWinForm.csproj]
C:\Windows\Microsoft.NET\Framework\v4.0.30319\Microsoft.Common.targets (3201): Unable to apply publish properties for item "stdole". [d:\temp\217\CTI\Ephone_DIT_Deploy\Sources\EPhoneWinForm\EPhoneWinForm.csproj]
C:\Windows\Microsoft.NET\Framework\v4.0.30319\Microsoft.Common.targets (4513): Item 'Microsoft.Net.Framework.3.5' could not be located in 'C:\Program Files (x86)\Microsoft SDKs\Windows\v8.0A\Bootstrapper\'. [d:\temp\217\CTI\Ephone_DIT_Deploy\Sources\EPhoneWinForm\EPhoneWinForm.csproj]
Skins\SkinEPhone.cs (3838): The member 'EPhone.SkinEPhone._txtOrderNumber_TextChanged(object, System.EventArgs)' does not hide an inherited member. The new keyword is not required. [d:\temp\217\CTI\Ephone_DIT_Deploy\Sources\EPhoneUserControl\EPhoneUserControl.csproj]
C:\Windows\Microsoft.NET\Framework\v4.0.30319\Microsoft.Common.targets (3201): Unable to apply publish properties for item "microsoft.vbe.interop". [d:\temp\217\CTI\Ephone_DIT_Deploy\Sources\EPhoneWinForm\EPhoneWinForm.csproj]
C:\Windows\Microsoft.NET\Framework\v4.0.30319\Microsoft.Common.targets (3201): Unable to apply publish properties for item "stdole". [d:\temp\217\CTI\Ephone_DIT_Deploy\Sources\EPhoneWinForm\EPhoneWinForm.csproj]
C:\Windows\Microsoft.NET\Framework\v4.0.30319\Microsoft.Common.targets (4513): Item 'Microsoft.Net.Framework.3.5' could not be located in 'C:\Program Files (x86)\Microsoft SDKs\Windows\v8.0A\Bootstrapper\'. [d:\temp\217\CTI\Ephone_DIT_Deploy\Sources\EPhoneWinForm\EPhoneWinForm.csproj]
C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\TeamBuild\Microsoft.TeamFoundation.Build.targets (1740): TF201077: The work item type Bug cannot be found. It may have been renamed or destroyed.
C:\Program Files (x86)\MSBuild\Microsoft\VisualStudio\TeamBuild\Microsoft.TeamFoundation.Build.targets (1740): The "CreateNewWorkItem" task failed unexpectedly.
Microsoft.TeamFoundation.WorkItemTracking.Client.WorkItemTypeDeniedOrNotExistException: TF201077: The work item type Bug cannot be found. It may have been renamed or destroyed.
at System.Activities.WorkflowApplication.Invoke(Activity activity, IDictionary`2 inputs, WorkflowInstanceExtensionManager extensions, TimeSpan timeout)
at System.Activities.WorkflowInvoker.Invoke(Activity workflow, IDictionary`2 inputs, TimeSpan timeout, WorkflowInstanceExtensionManager extensions)
at Microsoft.TeamFoundation.Build.Tasks.WorkflowTask.ExecuteInternal()
at Microsoft.TeamFoundation.Build.Tasks.Task.Execute()
at Microsoft.Build.BackEnd.TaskExecutionHost.Microsoft.Build.BackEnd.ITaskExecutionHost.Execute()
at Microsoft.Build.BackEnd.TaskBuilder.<ExecuteInstantiatedTask>d__20.MoveNext()
00:03
Creating work item
Exception Message: TF270015: 'MSBuild.exe' returned an unexpected exit code. Expected '0'; actual '1'. See the build logs for more details. (type UnexpectedExitCodeException)
Exception Stack Trace: at System.Activities.Statements.Throw.Execute(CodeActivityContext context)
at System.Activities.CodeActivity.InternalExecute(ActivityInstance instance, ActivityExecutor executor, BookmarkManager bookmarkManager)
at System.Activities.Runtime.ActivityExecutor.ExecuteActivityWorkItem.ExecuteBody(ActivityExecutor executor, BookmarkManager bookmarkManager, Location resultLocation)
Final Property Values
BinariesSubdirectory =
BuildDirectory = d:\temp\217\CTI\Ephone_DIT_Deploy
CommandLineArguments =
ConfigurationFolderPath = $/CTI/DEV/DEV_INT/source/TeamBuildTypes/EPhone_DIT
DoNotDownloadBuildType = False
LogFilePerProject = False
MaxProcesses = 1
NodeReuse = False
RecursionType = OneLevel
SourcesSubdirectory =
TargetsNotLogged =
TestResultsSubdirectory =
ToolPath =
ToolPlatform = Auto
Verbosity = Diagnostic
Final Property Values
Condition = True
Final Property Values
MaxExecutionTime = 00:00:00
MaxWaitTime = 04:00:00
ReservationSpec = Name=*, Tags=
Result = U4VMDWODBDEV03 - Agent1 (vstfs:///Build/Agent/217)
Final Property Values
AgentSettings = Use agent where Name=* and Tags is empty; Max Wait Time: 04:00:00
BinariesSubdirectory =
ConfigurationFolderPath = $/CTI/DEV/DEV_INT/source/TeamBuildTypes/EPhone_DIT
DoNotDownloadBuildType = False
LogFilePerProject = False
MSBuildArguments =
MSBuildPlatform = Auto
RecursionType = OneLevel
SourcesSubdirectory =
TestResultsSubdirectory =
Verbosity = Diagnostic
Please have a look and guide where to find a problem
Thanks ahead

Hi Hooi,
I'd like to know whether you can build successfully in your local machine with MSBuild. You have to build succeed with MSBuild beore you can build with TFS Build since TFS build use MSBuild as its default compiler.
From the error message, you might build with wrong platform for your project. Please check if the build platfrom is proper. If you have customization of your build process template, it would be better to elaborate the reproduce steps and customization details.
Best regards,

"Error while reading Exceptions" - Message No. /SCMB/ORDER 351

Hello,
An error message that we are getting as "Error while reading Exceptions" - Message No. /SCMB/ORDER 351 while entering a Work Order Number in the 'Work Order details' screen in the SNC Web UI. So, please let us know how to tackle this error in SNC.
Regards,
PCN

Hello Pavan,
This message can occure at multiple places. Most of these are status reading and checking in the /SCA/CL_SVORDER class. The following methods can throw this message:
CHECK_ITEM_EXCEPTION_STATUS
You can set a BP at line 20 and debug the STATUS_CHECK function.
GET_ITEM_EXCEPTION_STATUS
You can set a BP at line 29 and debug the STATUS_READ function.
READ_ITEM_EXCEPTION_STATUS
You can set a BP at line 31 and debug the /scmb/cl_odm=>get3_by_id method.
I hope this will help you.
Regards,
Richard

TFS Build Error - Exception Message: The specified path, file name, or both are too long. The fully qualified file name must be less than 260 characters

I am trying to set-up CI of Orchard CMS and deploy it on Azure using TF service. I am stuck at following error for path being
longer than 260 characters. However, when counted the total characters in path are 235. Please see the below error :
Other Errors and Warnings
1 error(s), 1 warning(s)
Exception Message: TF400889: The following path contains more than the allowed 259 characters: drop/_PublishedWebsites/Orchard.Web_Package/Archive/Content/C_C/a/src/projects/Orchard/dev/DevAltaf/Orchard/src/Orchard.Web/obj/Debug/Package/PackageTmp/Modules/BrentApart.BannerManager/Scripts/controllers/bannerAssignmentController.js. Specify a shorter path. (type VssServiceException)
Exception Stack Trace: at Microsoft.TeamFoundation.Build.Workflow.Activities.FileContainerDropProvider.EndCopyDirectory(IAsyncResult result)
at Microsoft.TeamFoundation.Build.Workflow.Activities.CopyDirectory.EndExecute(AsyncCodeActivityContext context, IAsyncResult result)
at System.Activities.AsyncCodeActivity.CompleteAsyncCodeActivityData.CompleteAsyncCodeActivityWorkItem.Execute(ActivityExecutor executor, BookmarkManager bookmarkManager)
Inner Exception Details:
Exception Message: The specified path, file name, or both are too long. The fully qualified file name must be less than 260 characters, and the directory name must be less than 248 characters. (type PathTooLongException)
Did anyone came across such issue while deploying Orchard on Azure with TF service? If yes, how did you sort this freaking error?
Thanks,
Altaf B.

Hi AltafB,
For your situation, you can short the path for the source code. Or use a short path for build agent folder in your build definition. You can refer to the links below to solve your problem:
http://blogs.msdn.com/b/aaronhallberg/archive/2007/06/20/team-build-and-260-character-paths.aspx
https://social.msdn.microsoft.com/Forums/vstudio/en-US/1638a5f0-9321-4ff9-9ee7-6d347badb972/please-some-solution-to-the-specified-path-file-name-or-both-are-too-long?forum=tfsbuild
Besides, since you deploy Orchard to Azure, you can also publish it directly using publish profile in Visual Stduio or WebMatrix directly.
Best regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How to get only current exception message from tables

Hi
In my sceanario , I want to have the list of Current MRP exception messages list from table
I understand that MRP detailed lists, including all exception messages, are stored in transparent table MDKP and cluster table MDTC.
I can tell ABAPer to write a report for me , to read the data from these tables , but I guess these tables contain old exception message also , which are not currently appearing in MRP list
How to get only current exception message
Rgds,
sandeep

Sandeep,
MDTC contains only data from the most recent MRP run. So, all messages you see are those which are currently valid.
The messages might have first appeared during a previous run, but they still need to be addressed.
Before you invest a lot of time and effort into writing and debugging a custom report, you should probably try to use the standard SAP functionality found in MD06. On the Processing indicator tab, you can select "Only with new exceptions". Here you can tag a material/plant as 'processed', and thereafter, the exceptions that existed there before you tagged the part will not be re-displayed.
Best Regards,
DB49

MRP Exception Message Number

I need to write an ABAP report which uses the details on the MD04 Stock Requirements List detail screen for those items which have an Exception Message number (10, 20,30 etc..). The screen shows this data is held in a structure called MDEZ. I have tried performance tracing and ABAP debugging but can't find the actual database table where this data is held.(I'm a newbie).
Can anyone help with the relevant table name or appropriate function module?

Check form AUFBEREITUNG_ANZEIGE in main program SAPMM61R, include MM61RF40 in particular - forms aufbauen_mdpsx & mdezx_aufbauen.
They use 2 FMs to retrieve data, but these FMs require proper values to be passed in... so check all code in the form AUFBEREITUNG_ANZEIGE.
As an option - you may try to call this form like
perform AUFBEREITUNG_ANZEIGE(SAPMM61R). and then use field symbol, to access MDEZX.
assign ('(SAPMM61R)MDEZX[]') to <fs_mdezx>.
I hope this helps.

Exception message number missing in EXIT_SAPLM61R_001

Hello experts,
I am using EXIT_SAPLM61R_001 for MD04 but in parameter IMDEZEXIT, the info of the Exception message number (AUSKT) and Exception message key (AUSSL) arer empty, although the line I'm debugging has an exception.
Does anubody know why??
Thanks!

Hi,
declare a constant and give value which u r maintaining in SE91,message class.zwm..and now instaed of goving the message from message class..try to give with constant./
message w001 with c_message..
Try it out if it works
Regards,
Nagaraj

Is there a report to track the exception messages after a MRP run ?

We have a scenario at our client site where MRP run is not optimized to the fullest.
The planners are not trained on how to interpret those exception messages.
They are not trained on how to reschedule / expedite planned orders resulting from an MRP run.
Is there a report out in SAP that keeps track of
1) History of number of exception messages by type ( Expedite/Reschedule/Cancel)
2) History of number of exception messages that were acted on or ignored by the planner.
This is to create metrics on the usage of MRP exception reports by planners.
Appreciate your inputs..

Hi
The exception messages are dynamic and time dependant. You cannot have history of exception message.. If your user is feeling difficult to use standard MRP reports. Create a new report using a function module MD_STOCK_REQUIREMENTS_LIST_API
It gives all MRP data including exception messages.
Regards
Antony

Purchase order exception message

Does anyone know what table the exception messages generated via MD04 /MD06 are stored.
Thank you

Thank you , very helpful , would you happen to know which tables i would need to link this back to a purchase order or sales order.
Thank you

"Invalid Block Type" exception message

I got "Invalid Block Type" exception message in my program. I'm not sure what this is. Could somebody please advice?
Thanks
GZIPInputStream gzip_in_stream = null;
BufferedOutputStream destination_out_stream = new BufferedOutputStream(
   new FileOutputStream(weatherFile), BUF_SIZE);
   byte[] input_buffer = new byte[BUF_SIZE];
int byteLength = 0;
while ( (byteLength = gzip_in_stream.read(input_buffer, 0, BUF_SIZE)) > 0 )
destination_out_stream.write(input_buffer, 0, byteLength);
destination_out_stream.flush(); // Ensure all the data is written to the output.
destination_out_stream.close();
gzip_in_stream.close();

ZipException, and it only says "Signals that a Zip exception of some sort has occurred."
I forgot to include this.
InputStream tempStream = ftpClient.retrieveFileStream(zippedFile);
gzip_in_stream = new GZIPInputStream(
new BufferedInputStream(tempStream));

Do you have an option for block all incoming message and request EXCEPTED messages from my contacts?

Please help!!To whom it may concernDear Madam/Sir who works for Skype & Microsoft Dear all who can really help, Do you have an option for block all incoming message and request EXCEPTED messages from my contacts? or Do you have any solution to solve my problem from begin to now in present time? Even though, I set the Privacy settings: - Allow calls from... "people in my Contact list only"- Automatically received video and share screens with "people in my Contact list only"- Allow IMs from "people in my Contact list only" I still received unknow users sent me messages in every day, contact requests etc. And they're all clearly spammings and identity thefts. I only wanna contact with my family and my freinds here with Skype via my Windows device and my mobile phone (w/Android OS). And this is the only way to contact with them, because they could use Skype only in overseas. BUT I don't need new friend from other unknow Skype member. I keep blocked all unknow spammers in every day. However in this morning, I feel so scared with Skype on my mobile, I looked at my mobile Skype, I saw it automatically showed me the list of all blocked members. BUT they were all unblocked (contact unblocked) by my mobile (Android version) Skype itself automatically, and listed them one by one on the screen, and about 30 seconds later, they all were disappeared suddenly. I don't know what do to now, is it indicating my account was hacked?And how could I found out all those members again and block them again and delete all of them for ever? I appreciate if you would improve the privacy protection. Thank you very very very much.

Hrm... that may be true and this may be a function of the phone email client that Apple just doesn't do.
No, I can easily MANUALLY delete the messages. I would prefer if I didn't have to do it twice, tho. Once on the mail server and once on the phone.
What I think the phone needs to do is, when it checks the POP, anything NOT there should be removed locally. I think you are correct on POP; the phone will poll the mx (mail exchanger) and the mx will pass off the messages to the phone. The phone then keeps ALL of that unitl you manually delete it.
If, say, I remove a message from the mx, I would like the phone, when next polls, to see that that particular message isn't on the server anymore and remove it locally.
Perhaps it's just me but if I delete the message on the mx itself, via my ISP's webmail interface, I really don't want to have to remove it again from my phone.
thxs!
cheers
rOot

Error: There was a failure to call cluster code from a provider. Exception message: Generic failure . Status code: 5015. SQL 2012 SP1

Hi,
Please help. I was trying to remove a SQL 2012 SP1 two node clustered instance using setup (Mantenance -> Remove Node)
I started by doing this on passive node (and was successful) but when I ran setup on active node just before finishing successfully I got this error:
TITLE: Microsoft SQL Server 2012 Service Pack 1 Setup
The following error has occurred:
The resource 'BCK_SG1DB' could not be moved from cluster group 'SQL Server (SG1DB)' to cluster group 'Available Storage'.
Error: There was a failure to call cluster code from a provider. Exception message: Generic failure . Status code: 5015.
Description: The operation failed because either the specified cluster node is not the owner of the resource, or the node
is not a possible owner of the resource.
For help, click:
http://go.microsoft.com/fwlink?LinkID=20476&ProdName=Microsoft%20SQL%20Server&EvtSrc=setup.rll&EvtID=50000&ProdVer=11.0.3000.0&EvtType=0xE8049925%25400x42B4DED7
BUTTONS:
OK
I noticed that SG1DB instance was removed on both nodes but on Failover Cluster Manager -> Services and Applications the SQL server instance for SG1DB is still there. So I tried to delete it but got the error:
Failed to delete SQL Server SG1DB. An error was encountered while deleting the cluster service or
application SQL Server SG1DB. Could not move the resource to available storage. An error occured
while moving the resource BCK_SG1DB to the clustered service or application Available Storage
Any ideas why it failed or how could I delete the SQL server instance from Clauster?
Thx

Hello,
Please read the following resource.
https://support.microsoft.com/en-us/kb/kbview/313882?wa=wsignin1.0
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

Error while running Configuration Wizard in SharePoint 2013: Exception in RefreshCache. Exception message :The '?' character, hexadecimal value 0x43A0, cannot be included in a name. Line 1, position 5694.

Hi Friends,
I was trying to run configuration wizard in SharePoint 2013 Central Administration and I got below error:
Exception in RefreshCache. Exception message :The '?' character, hexadecimal value 0x43A0, cannot be included in a name. Line 1, position 5694.
Yesterday my SharePoint server was running fine and today when I try to update a SharePoint solution (wsp) I got same error. Even if I try to do any operation
in Central administration like adding new WSP, Updating WSP , I get same error.
Does any one have any Idea?
Regards
Gireesh Painuly

Posted this a few weeks back - would appreciate any suggestions?
Thanks,
Carl

The underlying connection was closed: An unexpected error occurred on a receive..Exception.Message - while executing powershell command for sharepoint online site

" +The underlying connection was closed: An unexpected error occurred on a receive..Exception.Message " OR sometimes
"The remote server returned an error: (503) Server Unavailable..Exception.Message"
Getting exception above when performing various operation (site coll creating, group creation, adding users to group) for sharepoint online (Office 365) site using powershell script.
I want to create 3500 site collections using PS script. In-between getting above exception so it will skip one site collection creating and working again. for eg. after creating 11 site coll, script will through above exception and so 12th site coll will
not be create but working fine from 13 and so on...

Remote server seems working to me...any additional check?
if problem with remote server then may be loop to create site provisioning should not start again..Right?
any idea?

Error getting application exception message from client EJB 3

Hi, somebody nkow what is the error?
I have this simple session bean deploy in a jboss 4.0.5 GA application server
My interface:
package server.ejb.usuarios;
import javax.ejb.Remote;
@Remote
public interface Prueba {
     public void getError() throws Exception;
}My Session bean implementation:
package server.ejb.usuarios;
import javax.ejb.Stateless;
import server.ejb.usuarios.Prueba;
public @Stateless class PruebaBean implements Prueba {
     public void getError() throws Exception {
          throw new Exception("Mensaje de error");
}Simple, i can deploy this bean on my application server, now i have this client code:
package clientold;
import java.util.Properties;
import javax.naming.Context;
import javax.naming.InitialContext;
import javax.naming.NamingException;
import server.ejb.usuarios.Prueba;
public class MainPruebaError {
      * @param args
     public static void main(String[] args) {
          Context ctx;
          try {
               ctx = getInitialContext();
               Prueba pruebaSession = (Prueba) ctx.lookup("PruebaBean/remote");
               pruebaSession.getError();
          } catch (NamingException e) {
               // TODO Auto-generated catch block
               e.printStackTrace();
          } catch(Exception e){
               System.out.println("Get error from server: " + e.getMessage());
               e.printStackTrace();
     private static Context getInitialContext() throws NamingException {
          Properties prop = new Properties();
          prop.setProperty("java.naming.factory.initial",
                    "org.jnp.interfaces.NamingContextFactory");
          prop.setProperty("java.naming.provider.url", "127.0.0.1:1099");
          prop.setProperty("java.naming.factory.url.pkgs", "org.jboss.naming");
          return (new InitialContext(prop));
}and my client catch the exception but i can�t get the correct exception message. I need pass custom message from my server to my clients and wrap it in a exception, but when i run this example got the next output:
Get error from server: [Ljava.lang.StackTraceElement;
java.lang.ClassNotFoundException: [Ljava.lang.StackTraceElement;
     at java.net.URLClassLoader$1.run(URLClassLoader.java:200)
     at java.security.AccessController.doPrivileged(Native Method)
     at java.net.URLClassLoader.findClass(URLClassLoader.java:188)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
     at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:276)
     at java.lang.ClassLoader.loadClass(ClassLoader.java:251)
     at org.jboss.remoting.loading.RemotingClassLoader.loadClass(RemotingClassLoader.java:50)
     at org.jboss.remoting.loading.ObjectInputStreamWithClassLoader.resolveClass(ObjectInputStreamWithClassLoader.java:139)
     at java.io.ObjectInputStream.readNonProxyDesc(ObjectInputStream.java:1575)
     at java.io.ObjectInputStream.readClassDesc(ObjectInputStream.java:1496)
     at java.io.ObjectInputStream.readArray(ObjectInputStream.java:1624)
     at java.io.ObjectInputStream.readObject0(ObjectInputStream.java:1323)
     at java.io.ObjectInputStream.defaultReadFields(ObjectInputStream.java:1945)
     at java.io.ObjectInputStream.readSerialData(ObjectInputStream.java:1869)
     at java.io.ObjectInputStream.readOrdinaryObject(ObjectInputStream.java:1753)
     at java.io.ObjectInputStream.readObject0(ObjectInputStream.java:1329)
     at java.io.ObjectInputStream.defaultReadFields(ObjectInputStream.java:1945)
     at java.io.ObjectInputStream.readSerialData(ObjectInputStream.java:1869)
     at java.io.ObjectInputStream.readOrdinaryObject(ObjectInputStream.java:1753)
     at java.io.ObjectInputStream.readObject0(ObjectInputStream.java:1329)
     at java.io.ObjectInputStream.readObject(ObjectInputStream.java:351)
     at org.jboss.remoting.serialization.impl.java.JavaSerializationManager.receiveObject(JavaSerializationManager.java:128)
     at org.jboss.remoting.marshal.serializable.SerializableUnMarshaller.read(SerializableUnMarshaller.java:66)
     at org.jboss.remoting.transport.socket.SocketClientInvoker.transport(SocketClientInvoker.java:279)
     at org.jboss.remoting.RemoteClientInvoker.invoke(RemoteClientInvoker.java:143)
     at org.jboss.remoting.Client.invoke(Client.java:525)
     at org.jboss.remoting.Client.invoke(Client.java:488)
     at org.jboss.aspects.remoting.InvokeRemoteInterceptor.invoke(InvokeRemoteInterceptor.java:41)
     at org.jboss.aop.joinpoint.MethodInvocation.invokeNext(MethodInvocation.java:88)
     at org.jboss.aspects.tx.ClientTxPropagationInterceptor.invoke(ClientTxPropagationInterceptor.java:46)
     at org.jboss.aop.joinpoint.MethodInvocation.invokeNext(MethodInvocation.java:88)
     at org.jboss.aspects.security.SecurityClientInterceptor.invoke(SecurityClientInterceptor.java:40)
     at org.jboss.aop.joinpoint.MethodInvocation.invokeNext(MethodInvocation.java:88)
     at org.jboss.ejb3.remoting.IsLocalInterceptor.invoke(IsLocalInterceptor.java:77)
     at org.jboss.aop.joinpoint.MethodInvocation.invokeNext(MethodInvocation.java:88)
     at org.jboss.ejb3.stateless.StatelessRemoteProxy.invoke(StatelessRemoteProxy.java:102)
     at $Proxy0.getError(Unknown Source)
     at clientold.MainPruebaError.main(MainPruebaError.java:21)What is the problem??, i must see on the output
Get error from server: Mensaje de errorbut i have :
Get error from server: [Ljava.lang.StackTraceElement;why???, is only a simple application exception and don,t work, somebody can help me??
i have tried to use an interceptor class for get the exceptions and work, but without interceptor, dont work
thanks

I can resolve this problem change the JDK version used to develop my clint application and to run the jboss application server.
Current, in JBoss 4.0.5, the JDK requirement is JDK 5, and i was using JDK 6.

Desktop.debug: exceptions messages

Similar Messages

Maybe you are looking for