Desktop Software Stopped working all of the sudden..

All of the sudden I got a windows message saying "Blackberry Desktop Software has stopped working" (A problem caused the program to stop working correctly. Windows will close the program and notify you if a solution is available.) I un-installed and re-installed the program and the same thing continues to happen. I have no idea what's going on. Has this ever happened to anyone else? Can someone help me out?

It happens to me too just now. I just had my laptop upgraded.  before, i have it installed successfully without any problems encountered. in fact I was able to use it early yesterday before i upgraded my laptop. just now, when im trying to install the pc software, while installig it, it just gives a notification that it stopped. but later will show that i have successfully installed. but once you click to open the icon, it shows "Blackberry Desktop Software has stopped working". same with you i uninstall reinstall for 4x now, but still it isnt working.I even though it might be with my net connection, but it is not. I hope someone could help us. 

Similar Messages

  • Internet stopped working all of the sudden

    I have a WRT54G router connected to my iMac and Mac Book, everything was working fine for the past three months, and all of the sudden no Internet either wirelessly or from a port.
    If I connect my PC directly to the modem I can connect to the Internet. The Internet and port lights are turned on on the router.  I can login to the router, but when I check the IP address it just shows 0.0.0.0, tried doing a DHCP release\ renew on the router, but nothing. Also, cannot ping any sites from the router.
    These are the toubleshooting steps I've taken to try to fix the problem:
    Restarted both the modem and the router.
    Tried using a different ethernet cable from the modem to the router.
    Reset the router.
    Upgraded to latest firmware. 
    I have Comcast cable as my ISP. Has anyone seen this before? Thought I'd get some feedback before I call support.
    Thanks.

    1)access the router web ui
    2)go to the Mac Address Clone subtab , enable it and click "Clone" . Save the settings
    3)do a power cycle
    4)check whether the router gets an internet ip add now ..

  • Left click stopped working all of the sudden. Help?

    Earlier today, my MacBook Pro's trackpad button was working just fine. Now it's not. Whenver I press it, nothing happens. I can still move the cursor without a problem. I connected my Mighty Mouse to my MB Pro and everything in my MM works fine, except for the left click. Then I decided to shutdown my MB Pro and reboot it, hoping that it would get rid of the problem. After it turned back on, I realized that the left click is still not working, both on the trackpad and my MM. I even reseted my PRAM and that didn't fix my left click problem at all.
    How do I get the left click working again on BOTH my trackpad and my MM?
    Here are the specs for my MB Pro:
    - MacBook Pro with 15 inch screen (Late 2006)
    - 2.16 GHz Intel Core 2 Duo Processor
    - Running on the latest version of Lion (10.7.5)
    - 3 GB of RAM installed

    I have this problem too! I just posted a question - how did you fix it or did it just go away? Mine computer is unuseable. Left click does some things but not all.
    Here's my post
    I can open MAIL but the MAIL menu doesn't appear at the top, and the LEFT click doesn't work properly, but right click does work! Command Q doesn't close the program, it's like it's half open. I can get rid of the page with the LEFT clicker (red button) and I can sort of select stuff in an email but it's grey. The buttons along the top work (Get mail, new message etc), but if I open a new message I can't do anything with it, there's no cursor.
    Other programs the same (like Excel)
    I restarted with the buton on the back, it'll work ok for a few minutes then not so ok. I managed to copy some files onto a hard disc and that all worked fine.
    It seems to be all in the communication between the mouse/keyboard and the computer. Yes I have tried a wired mouse and keyboard, with the bluetooth one off, no help, same result.
    This is not a result of new installation. There's no half-dead mouse hiding somewhere.
    Help! Thanks

  • Please Help Me! My buttons stopped working all of the sudden.

    I am not sure how this happened. I think some rain my have gotten on my BlackBerry. Maybe it seeped in or something. But I'm freaking out right now because I am receiving texts and i can't view them.
    Anyway. The buttons aren't working. Only the trackball sort of works. A little. And I tried removing the battery twice. the device re-booted and went back to not working. It starts to type on its own : Ttgtgtgtgt.... and will only light up when i plug it in like as if to charge it. 
    PLEASE HELP!!!! I AM DYING WITHOUT MY BLACKBERRY

    If you got it wet remove the battery immediately! Let the phone dry out thorougly for 4-5 days in a cool dry place in a bag of rice near an air conditioner if possible. Then try putting the battery back in and see if it works. Be patient! You can check for water damage by checking if the litmus paper on the battery and in the battery compartment (several) have turned pink.
    Kijana
    Please remember to:
    1. Mark Accept as Solution on the appropriate post once your issue has been resolved
    2. Give Kudos to helpful posts (click the star next to the post)
    Thanks

  • Connection timeout when trying to access network.  just stopped working all of the sudden.  any ideas before i buy a new airport?

    I've already rebooted and created a new network.  No change.  I was able to once get the network to connect and it took forever for a page to load.  I'm thinking the base station is bad.  It's 3.5 years old.  The station still accepts internet connection and will route (hard wire) to my computer, but no wifi output.  Checked my computer's airport with another network and was fine.

    1)access the router web ui
    2)go to the Mac Address Clone subtab , enable it and click "Clone" . Save the settings
    3)do a power cycle
    4)check whether the router gets an internet ip add now ..

  • 2nd Gen Time Capsule - will not power up - just stopped working all of a sudden - I have tried other power outlets - I have tried pressing the reset button - no light

    2nd Gen Time Capsule - will not power up - just stopped working all of a sudden - I have tried other power outlets - I have tried pressing the reset button - no light

    The power supply is shot. But that it lasted even this long is the wonder.. not that it died.
    The TC runs too hot..
    Look on ebay for "Time Capsule power supply"
    You can get a replacement and fix it although the economics are not so good.. it is probably time for a new TC.
    If you can DIY it is really only a few dollars worth of capacitors that go bad.
    See https://sites.google.com/site/lapastenague/a-deconstruction-of-routers-and-modem s/apple-time-capsule-repair
    For a bunch of alternatives.

  • Blackberry Desktop Software - Stops working at the end of synchronization

    During synchronization, the same handful of calendar conflicts come up.  After clearing them, and at the very end of synchronization, I get a pop up that "Desktop Software stopped working"...info fades out and the only option is to hit a CLOSE button which shuts down the software. 
    I no longer receive the synchronization report and although most data does sync, I am trying to determine the cause of this.
    This is the only forum I can find.  I do not see a Blackberry support anywhere...

    Hello,
    What is the version of the BlackBerry Desktop Software?
    Have you tried to uninstall the Desktop Software and download and re-install the newest version of BlackBerry Desktop Software?
    BlackBerry Desktop Software:
    http://ca.blackberry.com/apps-software/desktop/
    610_b038_multilanguage.exe
    I have edited the post, the previous post indicated "Device" Software which was a typo for "Desktop" Software.

  • Speakers stopped working all of a sudden in my laptop HP pavilion g6 (windows 8)

    Its been a year i bought lapi. i hardly used it.. My laptop speakers stopped working all of a sudden. I think its coz i upgraded my os from windows 8 to 8.1 (automatically). Even though i upgraded it still askes for upgradation every time i switch on the laptop..
    Can anyone suggest me the issue..??
    Thanks in advance for solution..

    Hello San123,
    Welcome to the HP Forums!
    I will definitely assist you with the computer's issue regarding lack of sound from the speakers. Before anything else is done, please make sure you try every step in this thread: Troublesho​oting Guide: Audio does not Work after a Certain Period of Time
    If every step does not help, please provide the following information:
    1. The computer's model number. If you require assistance locating this information, please reference this website: Guide to finding your notebook product number
    2. The computer's operating system. If you require assistance locating this information, please reference this website to determine your Windows operating system.
    3. Does this occur on certain programs, or all programs?
    4. Have you installed any new software or drivers on this computer, before the issue appeared?
    5. What steps have been attempted from my first post on this thread, and what were the results?
    Additionally, if the issue just began occurring, I would perform a system restore. I want you to bring the computer back to the earliest restore point possible, in an attempt to dodge whatever caused the issue. Here is a document on how to perform a System Restore: System Restore
    Either way, let me know what happens. Thanks!
    Mario
    I worked on behalf of HP.

  • Using a first gen iPad.  Video and audio from internet sites simply stopped working all of a sudden.  Any suggestions?  Thanks.

    Using a first gen iPad.  Video and audio from internet sites simply stopped working all of a sudden.  Any suggestions?  Thanks.

    1)access the router web ui
    2)go to the Mac Address Clone subtab , enable it and click "Clone" . Save the settings
    3)do a power cycle
    4)check whether the router gets an internet ip add now ..

  • During app load, Premiere elements 11 stopped working all of a sudden. Why?

    Premiere elements 11 stopped working all of a sudden. Says "A problem caused the program to stop working correctly" I re-installed it but still the same.
    I haven't installed any other apps except adobe reader and there were a few Windows updates but that was it. Some history - I had defraged my hard drive when this started to happen. Wouldn't the re-install have fixed it if the de-frag caused this problem? What is causing elements to stop loading at the splash screen?

    DFMA
    Thanks for the follow up with the very helpful information.
    If this is one of those Importer QuickTime type issues, the answers are few if any.
    If you have not already tried
    Have you attempted to delete the Adobe Premiere Elements Prefs file and, if necessary,
    the whole 11.0 Folder in which it exists.
    then, please try the following...
    My expectations for the following are not high, but worth the time -
    1 uninstall the usual Control Panel way - you might want to uninstall QuickTime at the same time.
    2. free ccleaner run through (regular and registry parts)
    CCleaner - Download
    3. reinstall QuickTime and then Premiere Elements with anti-virus and firewall(s) disabled.
    Others on the list...
    1. Create a new User Account with Administrative Privileges and install and run Premiere Elements
    from there.
    2. Use a new set of installation files either from Adobe if you purchased the program from it as an online
    download, or get tryout installation files for 11 into which you can insert your purchased serial number.
    Photoshop Elements 11 Direct Download Links: Free Trials, Premiere | ProDesignTools
    If the latter, read and carry out carefully the Note: Very Important Instructions in order to avoid an Access
    Denied message.
    We will be watching for your progress.
    Thanks.
    ATR

  • HT4352 I have turned home share on my iPhone and my Apple TV and the remote app doesn't work all of the sudden. How can I fix this?

    I have turned home share on my iPhone and my Apple TV and the remote app doesn't work all of the sudden. How can I fix this?

    Welcome to the Apple Community.
    Have you updated to the latest version of the Remote App.

  • My i phone 5 stopped working all of a sudden and now it is not even getting connected to i tunes and i am not even able to switch it on

    my i phone 5 stopped working all of a sudden and now it is not even getting connected to i tunes and i am not even able to switch it on..please suggest what to do??

    Hi PriankaB,
    Thanks for using Apple Support Communities.  This article has steps you can try if your iPhone won't turn on that may help:
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/TS3281
    Cheers,
    - Ari

  • Why does my 9810's auto rotate stop working all of a sudden?

    My 9810's PIN is: 2978D267
    As said in title, the auto-rotate has ceased to work all of a sudden. I've tried removing the battery several times for total reboot and no luck, also tried drawing the keyboard back and forth and no dice. the other anomaly being the inability of recharging its battery with either 1A or 1.5A, wall socket dependant.
    I am on the sixth month of use, the place I purchased this handset from is no longer exists so I have no idea how the promised 2 years warranty is supposed to be.
    I hope that I can get some clue from here. Thanks.
    regardless of race, religion, social status, material, what not

    Let's make sure we're on the same page. When you remove your battery, is your phone turned on? Yes = proper battery pull, no = nothing will happen.
    If your phone is turned ON, then it's time for an OS reload using BlackBerry Desktop Software.
    Try that and post back with your results.
    - If my response has helped you, please click "Options" beside my post and mark it as solved. Clicking the "thumbs up" icon near the bottom of my response would also be appreciated.

  • I can no longer connect to the internet on my laptop using my personal hotspot. Stopped working all of a sudden. Any tips as to why?

    I used to always use my personal hotspot and connect to the internet on my laptop. Then one day it stopped working. I updated my phone so my hotspot password changed, so I changed that in the properties. It now says it's connected to my iPhone and there's internet access, but when I try to do anything it says not connected.

    It shows a connection. When using wifi n USB. I don't know how to connect using Bluetooth seeing what it says to do is totally different from my computer.
    I do have a connection but I can only connect to some sites, I tried YouTube n nfl.com n they both worked but google, hotmail n Facebook said couldn't connect.
    I tried using safari on my computer n like explorer I could only connect to a few different websites.

  • HT1338 I have a mac mini with an intel i7 quad processor running on Mac OS 10.9. My audio output stopped working all of a sudden, even though the volume is on maximum and un-muted. How do Iget it to start working?

    I just purchased a mac mini with an intel i7 quad processor running on mac OS 10.9.
    While listening to a music video on You Tube the audio stopped working.
    How do I get it to work?

    See: https://discussions.apple.com/message/25486455#25486455

Maybe you are looking for

  • Using two apple IDs on one Itunes account

    I recently purchases a ipad for my 86 year old mother. I want to also add music to it that I have cd's for. She now has an Apple ID of her own and I have my own Apple ID. The problem is this, when I log out of my itunes account and log in as her, I c

  • Send XML as acknowledgment from BPM

    Hi  Experts I have scenario where our XI box will receive an XML, so whenever we receive an XML XI should send back another XML as an Acknowledgment. Is there any way I can send an custom XML format as an acknowledgment? In BPM Send step I could see

  • GR/IR clearance

    Hi All, In PO price for material is 10000. In taxes (invoice tab, display taxes, tax value is 1500. While doing GR the whole of 11500 is getting debitted to stock and credit is happening in GR/IR for 11500. In PO , item level condition tab, PB00 is 1

  • TS3679 I have A Imac Pro and I can back up my iMac Pro to my time machine but I can't back up my Ima

    I have a Time Machine I set it up and at this time my wifi work and when I backup my Mac Book Pro I can back up my files to my Time Machine. But when I want to back my Imac to my Time Machine I can't. I go to the Time Machine Icon the screen comes up

  • Adobe Postscript Fonts on new iMac?

    Hi, I'm thinking of getting one of the new iMacs. But I wonder, I have some Adobe Postscript Fonts that I use with my G5 Mac; will they work with a new iMac? Patrick