Detailed client Report in WCS

Hi,
what exactly mean the fields of the traps that appear in the Detailed Client report of the WCS?
07/08/10 08:09,"00:04:23:71:67:bf",,"Campus> Ome > CN.OM.P03","XSFK2MP345","10.120.205.25",07/08/10 08:09,"0 secs","0.0.0.0",0,-128,"802.11b","N/A",0,0,0,0,"No","Associated","Client '00:04:23:71:67:bf' is associated with AP '00:23:eb:2d:8a:e0', interface '0'."
which means many associations of "0Sec" with no IP assigned?
Thanks!

Hi,
Are you still facing this issue?
thanks,
Vinay

Similar Messages

WCS Busiest Client Report Problem

We are using Wism 4.0.155.5 and WCS 4.0.81.0. Everytime I run "busiest client report" on WCS, I get some clients with throughput more than 70Mbps and utilization more than 600%!!! It is very weird. Anyone see this as well? Thanks.

zhenningx:
I see it too. It definitely appears to be a bug, but I will do some checking. Mine show upwards of 2000% and most of my top 25 show an almost identical tx/tx amount of 4gb.
If I make any headway with TAC, I'll let you know.

WCS Unique Client report problem

If I run a "Unique Client" report in WCS (based on 4 controllers) using the range "last 1 day", I get plenty of data. But if I choose a specific range of time, even within the last 24 hours, I don't get any data. Seems like a bug. Anyone else experience this issue?
It's WCS 7.0.172

Seems you are facing below bug and needs a patch uniqueclients.xml which can be provided by TAC.CSCtq64813
Apply the workaround which done by the following steps: 1. Stop WCS 2. cd to /webnms/classes/com/cisco/server/reports/conf 3. Backup UniqueClients.xml 4. Copy the attached file to UniqueClients.xml (batch file attached in the case) 5. Restart the server

WCS Client Reporting

Hi All,
hoping this is the right sub-forum for this query!
WCS is missing entries from it's client details report. on our firewall logs I had an IP I wanted to check for it's MAC address, I could see the log entry in our firewall and the time and date stamp along with the wireless IP Address.
I ran the Client Details report in WCS on the date and specified the times between 12:00 noon and 6:00pm and it failed to find the associated IP address in the log.
I know for certain that the IP was active at that point in time and it should appear in a our client details report, but it's not getting logged.
We are using version 7.0.172.0 of Cisco WCS if that makes any odds

You can use the WCS navigator. The Cisco WCS Navigator provides network administrators with easy, cost-effective access to information from multiple geographically diverse Cisco WCS management platforms. This innovative platform allows network managers to partition the unified wireless network at the management level.

WCS: Bug with unique client report?

I'm running WCS 7.0.172.0 and have run into the situation where a Unique Client Report, when run for the last day, shows lots of clients (properly). When you select a specific date range, you get no records, regardless of the date range (you can even select the last 24 hours with the drop-downs). Is this a bug?

I've gone back and forth with TAC on this, and it's been explained to me that the function of the report has changed recently and the description for what it does is no longer valid. I STILL think there is a bug in this, however, as it appears whenever I run this report, it only shows me the unique clients RIGHT NOW, even if I pick "last day" which I'm told is really the only valid criterion... something is definitely broken here.

Reporting in WCS Question

Is there any way to generate report in WCS for clients associated / authenticated by AP's. I was able to get Client count by controller, What I need is client count by Access Point.
If anyone has any suggestions please contribute. WCS Version 7.0.172.0
Thanks
Anil Jacob

Have you used a beta version or earlier pre release version?
You have an issue that is related some how to entries that were in beta codes of WCS.
A few things to try, first make a backup of your db.
Then, go on the CLI, bin folder of WCS and after run:
1.StopWCS
2.dbamin checkschema
3.StartWCS
See if this helps.
I dont want to push you for opening a TAC case and would like to avoid it, but if you are concerned about keeping the same db and not loose any data, we need a TAC case to be opened. That will involve that you upload me your database so we can try to fix this manually.
If you dont care about the DB and you are ok to rebuild it then from the CLI
1. StopWCS
2. dbadmin reinitdb
3. StartWCS
Reconfigure your WCS, the issue will be gone.
If you decide that you can not loose the db and the previous steps did not help, open a TAC SR between now and the next couple of hours and ask for lavramov, I can help you out.

Reporting MSE (WCS)

Hi@all,
we have a small problem with the "Client Location Tracking"-report in WCS.
If we make create a job for this kind and activate the schedule, we get empty reports. If we open the job and press "run", we get all clients listed. (eport is possible, too).
If the job is running via the schedule, we get "Report ran successfully and the run result has no data" but this is impossible.
Our infrastructure:
MSE 3355 (7.0.240)
WCS (7.0.240)
WLC 4404 (7.0.240).
I hope anybody could help.
kind regards
René

So, yesterday we cleared the database of the MSE via WCS.
After this procedure we got our reports.
Now, round about 24h later, they are corrupt.
If we look at the CPU-Status of the MSE, we see that some oracle -instances have 100%CPU (also 1 core full) and a report takes ~ 10 Minutes.
If execute the report now, we get it in 20-30 sec.
Also it seems a bug. TAC case is opened, but it looks like that we don´t get help, missing contract *argh*
Edit:
What i have been realized, that the DB disk memory is 4199696000. It seems, that the db, couldn´t be larger than 4GB, because yesterday we have nearly the same amount of data befoor we cleaned the database. This couldn´t be correct, or?

Different display on client report builder and web reports

Hi all, I have build a report in report 6i version Report Builder 6.0.8.13.1.And I set the page to 8.5*11 ,and it runs well in the client ,but when I put it on the UNIX SERVER,and run it from web URL,It displayed different from the client report builder.The web report is "smaller" than the client report ,but the font size is as same as the client .
My HPUX is 11x,and display the Chinese report .
Any body know why ?give me some advice ,thank u very much.

Hi
If you had built the report definition on Windows and then moved this to Unix server, you may find different fonts in use. This is becuase your Unix setup does not have the same fonts install. At design time, You need to use fonts which are available on Unix also. The same fonts shaould also be installed for printer in Unix i.e. the AFM/PFM font files should be kept under $ORACLE_HOME/guicommonX/tkXX/admin/AFM or PFM directory. This would give you the same output and would lessen the porting affect.
Thanks
Rohit

Due date in Detail Aging report

Dear all,
I would like to ask if it is possible to add the Due date for each document displayed in the Detailed Customer Receivable Againg report ?
I tried, but it seems impossible to do so, even I set the field as System Variable (as the Due date in Dunning module).
Thanks a lot

Hi,
'Due Date' column of the documents is available in:
Aging Report - 'Customer Statement Report (One Page per Customer)'
The same is unavailable in the Details Aging Report.
Regards,
Jitin

Search on Master Detail form/report

Hi,
I noticed that when I created a new application in Apex 4.01 basing the intial page on a Master Detail form/report, I was able to add a search item to the initial page. When I go to add another page with a different Master detail form/report, I did not have any option for adding a search item to the report page. Seems like an oversight?
I would appreciate any hints as to how to add same search item to my 2nd Master/Detail form/report.
Thanks,
Pat

Me too facing the some problem can some one pls help

Details of Reports scheduled on SSRS (Report name, userdetails, frequency, etc)

Hi all,
Is there a way to find all SSRS scheduled reports details such as (Report Name, schedule time, mail IDs configured, etc.)?
Please help as we have many SCCM reports on SRS, and manual work will take very long time..
scorpITs | http://scorpITs.blogspot.com

Hey ucrajee,
Here is simple SQL query which will give you details on report subscription along with Subscription type, render format, next run date, time, email ID configured with subscription etc.
You need to run this SQL Query on your report server database.
SELECT
c.Name AS ReportName,
'Next Run Date' = CASE next_run_date
WHEN 0 THEN null
ELSE
substring(convert(varchar(15),next_run_date),1,4) + '/' +
substring(convert(varchar(15),next_run_date),5,2) + '/' +
substring(convert(varchar(15),next_run_date),7,2)
END,
'Next Run Time' = isnull(CASE len(next_run_time)
WHEN 3 THEN cast('00:0'
+ Left(right(next_run_time,3),1)
+':' + right(next_run_time,2) as char (8))
WHEN 4 THEN cast('00:'
+ Left(right(next_run_time,4),2)
+':' + right(next_run_time,2) as char (8))
WHEN 5 THEN cast('0' + Left(right(next_run_time,5),1)
+':' + Left(right(next_run_time,4),2)
+':' + right(next_run_time,2) as char (8))
WHEN 6 THEN cast(Left(right(next_run_time,6),2)
+':' + Left(right(next_run_time,4),2)
+':' + right(next_run_time,2) as char (8))
END,'NA'),
Convert(XML,[ExtensionSettings]).value('(//ParameterValue/Value[../Name="TO"])[1]','nvarchar(50)') as [To]
,Convert(XML,[ExtensionSettings]).value('(//ParameterValue/Value[../Name="CC"])[1]','nvarchar(50)') as [CC]
,Convert(XML,[ExtensionSettings]).value('(//ParameterValue/Value[../Name="RenderFormat"])[1]','nvarchar(50)') as [Render Format]
,Convert(XML,[ExtensionSettings]).value('(//ParameterValue/Value[../Name="Subject"])[1]','nvarchar(50)') as [Subject]
---Example report parameters: StartDateMacro, EndDateMacro & Currency.
,Convert(XML,[Parameters]).value('(//ParameterValue/Value[../Name="StartDateMacro"])[1]','nvarchar(50)') as [Start Date]
,Convert(XML,[Parameters]).value('(//ParameterValue/Value[../Name="EndDateMacro"])[1]','nvarchar(50)') as [End Date]
,Convert(XML,[Parameters]).value('(//ParameterValue/Value[../Name="Currency"])[1]','nvarchar(50)') as [Currency]
,[LastStatus]
,[EventType]
,[LastRunTime]
,[DeliveryExtension]
,[Version]
FROM
dbo.[Catalog] c
INNER JOIN dbo.[Subscriptions] S ON c.ItemID = S.Report_OID
INNER JOIN dbo.ReportSchedule R ON S.SubscriptionID = R.SubscriptionID
INNER JOIN msdb.dbo.sysjobs J ON Convert(nvarchar(128),R.ScheduleID) = J.name
INNER JOIN msdb.dbo.sysjobschedules JS ON J.job_id = JS.job_id
Let me know if you have any queries.
Thanks,
Sandip Shinde(Blog:bi-bigdata.com|Twitter:@CloudBI_Sandip)

GroupWise client reports that there is no Default Mail Clien

Installation of GroupWise client reports that there is no default mail client. On clicking OK the next error: "The 'MAPI Session Handle' of the Novell GroupWise 'Object Request Broker' could not be accessed. The address book cannot run.
In our company we use GroupWise 7 on a mix of Windows XP Pro and A few Windows 7 Pro machines. On all machines where the GroupWise 7 client with hot patch 4 (HP4) was installed everything works fine along with other installed applications with a specific mention of MS Office 2003 or even MS Office 2010.
This morning (August 9, 2011) a new Windows 7 machine was deployed to a new Database Administrator. It was this machine that had these errors. The machine was deployed from a disk image.
The problem was baffling because we never experienced this problem on the other Windows 7 machines and un-installing and re-installing GroupWise even with Administrator privileges did not solve the problem.
Anyway, to cut a long story short, the bottom line is this: Don't trust an installation made by someone else even if they are Database Administrators! (Our IT dept consists of an IT Operations section and a Developers Section).
The installation of Microsoft Office by the IT Operations crew never includes the Microsoft office OutLook client. This installation had it included and that was what was causing the whole problem.
The Solution: Simply use the Microsoft Office installation to remove the Microsoft Office Outlook client and the problem went away immediately. We did not have to remove and re-install GroupWise after that was done.
Hope this helps someone.

Kenlobo <[email protected]> wrote:
>
> Hope this helps someone.
>
Thanks for sharing this.
Danita - http://www.caledonia.net/blog

Equal Employment Category details in report

Hi Experts,
I need to get EEO Category details in report for job code listing.
Where we maintain job codes?
In SPRO settings I have seen under EEO information for US based public sector employees, that EEO category is assigned to jobs.
In OM infotypes, in which infotype can we see the EEO details, so that the same field can b used in get
the output in report?
Regards
Aryan

Hi try to maintain this table
V_T5U13.double click the job..where you can maintain EEO,AAP,OCC category
US Job attrubtes infoype(1610),WC State, Code, Attribute( 1613).for this infotype u need to set the country specific indicator as 10 thru pp01>settings>country specific infotype-->no country specific..or enter as 10.

Crystal Reports 2008 Customer Details Aging Report Example / Sample

Hello!
Anyone willing to send me a customer details aging report example for SAP Business One? (or give me a link?)
I've been looking all over and have found examples of things, but not specifically for B1.
Anything would be useful I am pretty flexible, I just want some bones to work from. In return I can send you back what I build from it.
Thanks in advance,
Mike

Hi Mike, you might have better replies if you post your question to the B1 forum. They would be familiar with the B1 functioanlity and data sources.

Client reports "fuzzy" / "broken up" appearance of type??!

I've been doing websites for some time now, and this is a new one for me. My client is reporting that the text in the sitewide header and footer, as well as any/all text that's created in image files appears "fuzzy" or "broken up" to him on some monitors. He reports this effect is happening on a 17" monitor with 1280 x 1024 resolution. I have the same size monitor and same resolution of the display, and I cannot see any problems viewing the site on IE or on Firefox. I've viewed the site from my work and home computers (and the home computer is set to an even LOWER resolution), and I'm apparently not seeing the effect he's seeing. All appears well to me.
The image files are generated using Adobe ImageReady using "smooth" or "sharp" settings for the text, and all are JPEGs generated at maximum quality, at standard web resolution of 72ppi. Settings: Quality 100, Blur: 0, and with checkboxes Optimized, Progressive, ICC Profile, and Preserve EXIF Metadata all turned OFF.
This is a complete headscratcher for me. I've of course explained to my client that text generated in image files will look somewhat "softer" than will body copy from text in the HTML of the pages, but he's telling me the text in the image files on the pages look just fine on some of his computer monitors, and just fine if he prints them out, but "fuzzy" and "broken up" on others, specifically the 17" at 1280 x 1024.
See site-in-progress is posted at
http://www.brn-management.com/janmiele/Mercer03/index.htm
I've never had anyone mention this before. What's going on here??
Any advice greatly appreciated!
---Jan

Yah. Hard to induce the client to pull out the manual for his monitor if he's in another town and just doesn't want to.
Harder still to convince him that just because this is happening to him, doesn't mean it's *not* happening to everyone else "out there" who might visit his website. Again I have asked him to look at other sites using the "problem" computer/browser combination to see if he's seeing the same effect on other sites, or if it's just this one site, and still no answer to that question.
This is what the client reports:
"Heres what I have found. Im running version 7.0.5730.13 Internet Explorer and while Im in the browser I have a zoom button down in the bottom right hand corner that defaults to 100%. If I select this and change the percentage to anything other than 100%, (i.e. 99% or 101% or 400%) the font look great. Only at 100% is the quality less than perfect."
So, at my home machine, which is running that version of the IE browser, I tried various combinations of the "Zoom" setting (including the ones he lists) as well as other screen resolution settings and I don't see anything eggregiously awry. Of course, Zooming a page to 400% *will* naturally cause *some* "fuzziness"
:-O
but other than that I'm not seeing anything that's not what I'd expect.
Unless I personally go to my client's office and try to see what else might be awry (aspect ratio? other settings?), and so long as he hasn't sent either me or the hosting service vendor a screenshot of what it is he's seeing that's wrong (I emailed him step by step instructions for how to get one and asked that he email it to both me and the hosting service), I cannot see the problem, nor can my tech-cohorts from the hosting service see it, much less fix it. I'm not a hardware person, but I'm beginning to wonder if I should send someone from Geek Officecalls over to his place of business to look into this.

Detailed client Report in WCS

Similar Messages

Maybe you are looking for