DETECT THE BOUNDARY OBTAIN THE COORDINATE OF ALL POINTS IN THE BOUNDARY

HI EVERY BODY, HAPPY NEW YEAR,,,,,
I AM RECENTLY USE LABVIEW 9.0 IN ORDER TO CREATE  A PROGRAM THROUGH WHICH I CAN OBTAIN PARTICLE CHARACTERISTICS ( RADIUS, CENTER, LOCAL GRAY LEVEL, MINIMUM GRAY LEVEL), BUT NOW I AM FACING A PROBLEM THAT WHILE I AM TRACKING THE BOUNDARY OF THE PARTICLES IN THE THRESHOLD IMAGE, THE PROGRAM GIVE ME A 2D ARRAY CONTAINS ALL VALUES OF THE BOUNDARY OF ALL PARTICLES,. UNFORTUNATELY I CAN NOT TO DETERMINE THE COORDINATE OF EACH POINT IN THE BOUNDARY.
SO, HOW CAN I OBTAINED POSITION OF EVERY VALUE IN THE BOUNDARY....
THANKS FOR YOUR HELP

2D ARRAY CONTAINS THE VALUES OF THE PARTICLE BOUNDARY...........

Similar Messages

  • I need to connect an Airport Express to an exisitng Wi-Fi Netgear Router. 1) My PC do not detect the Airport Express, 2) AE is flashing amber all the time... Please if someone can help?

    I need to connect an Airport Express to an exisitng Wi-Fi Netgear Router. 1) My PC do not detect the Airport Express, 2) AE is flashing amber all the time... Please if someone can help?

    Before I bought it I did the same question at the Apple Store, and they told me "You can extend your existing Wi-Fi Signal with Airport Express wireless...
    You cannot extend wireless from any brand except another apple router.. the store might have assumed you were using an apple main router. Most people who buy express buy them to extend an extreme or time capsule.
    You are correct .. in the setup documents it does say 5.6.1 is adequate to do the setup.. my bad.. !!

  • Hp Pavilion is now not detecting the battery all of the sudden after 1 1/2 years.

    My Hp Pavilion laptop is not detecting the battery. I can't seem to find information anywhere regarding how to resolve this issue.  The battery was detected as of yesterday and was charging still at a "good" level. The battery Icon has an X and  "No battery detected" .
    Why does this happen and how to resolve it.  I've tried taking off and on the battery several times as well as rebooting. NO luck!
    Thanks,
    Mayra

    I'm using iMovie 9

  • Pulseaudio detects the correct sound device only sometimes

    I'm running Arch64 with KDE and Pulseaudio, and every time I reboot pulseaudio seems to detect a different device. (Getting the information from pavucontrol)
    The correct one is "Analog Surround 5.1 Output + Analog Stereo Input".
    But sometimes when I boot up it doesn't detect that one (so I can't select it) and detects "Analog Surround 5.0 Output + Analog Stereo Input", or sometimes it only lets me choose stereo sound.
    When it detects the right thing it works great, but problem is it doesn't detect it all the time. I played around with it, and it seems it's more likely to detect the right thing if I stay at the KDE login screen for 10 or so seconds before logging in, so maybe the problem is pulseaudio isn't starting up soon enough?
    I've checked the wiki and googled for similar problems but can't seem to find anything.
    Anyone have any ideas? Or does anyone know how to make pulseaudio start up sooner?
    Thanks.

    Oh sorry. A little tired is all.
    I: main.c: setrlimit(RLIMIT_NICE, (31, 31)) failed: Operation not permitted
    D: core-rtclock.c: Timer slack is set to 50 us.
    D: core-util.c: RealtimeKit worked.
    I: core-util.c: Successfully gained nice level -11.
    I: main.c: This is PulseAudio 0.9.22
    D: main.c: Compilation host: x86_64-unknown-linux-gnu
    D: main.c: Compilation CFLAGS: -march=x86-64 -mtune=generic -O2 -pipe -Wall -W -Wextra -pipe -Wno-long-long -Winline -Wvla -Wno-overlength-strings -Wunsafe-loop-optimizations -Wundef -Wformat=2 -Wlogical-op -Wsign-compare -Wformat-security -Wmissing-include-dirs -Wformat-nonliteral -Wold-style-definition -Wpointer-arith -Winit-self -Wdeclaration-after-statement -Wfloat-equal -Wmissing-prototypes -Wstrict-prototypes -Wredundant-decls -Wmissing-declarations -Wmissing-noreturn -Wshadow -Wendif-labels -Wcast-align -Wstrict-aliasing=2 -Wwrite-strings -Wno-unused-parameter -ffast-math -Wp,-D_FORTIFY_SOURCE=2 -fno-common -fdiagnostics-show-option
    D: main.c: Running on host: Linux x86_64 2.6.36-ARCH #1 SMP PREEMPT Fri Dec 10 20:32:37 CET 2010
    D: main.c: Found 4 CPUs.
    I: main.c: Page size is 4096 bytes
    D: main.c: Compiled with Valgrind support: no
    D: main.c: Running in valgrind mode: no
    D: main.c: Running in VM: no
    D: main.c: Optimized build: yes
    D: main.c: All asserts enabled.
    I: main.c: Machine ID is 64241363ff22789c833f658a0000017e.
    I: main.c: Session ID is 64241363ff22789c833f658a0000017e-1294205012.483143-1205134284.
    I: main.c: Using runtime directory /home/joe/.pulse/64241363ff22789c833f658a0000017e-runtime.
    I: main.c: Using state directory /home/joe/.pulse.
    I: main.c: Using modules directory /usr/lib/pulse-0.9.22/modules.
    I: main.c: Running in system mode: no
    I: main.c: Fresh high-resolution timers available! Bon appetit!
    I: cpu-x86.c: CPU flags: CMOV MMX SSE SSE2 SSE3 SSSE3 SSE4_1
    I: svolume_mmx.c: Initialising MMX optimized functions.
    I: remap_mmx.c: Initialising MMX optimized remappers.
    I: svolume_sse.c: Initialising SSE2 optimized functions.
    I: remap_sse.c: Initialising SSE2 optimized remappers.
    I: sconv_sse.c: Initialising SSE2 optimized conversions.
    D: memblock.c: Using shared memory pool with 1024 slots of size 64.0 KiB each, total size is 64.0 MiB, maximum usable slot size is 65472
    D: database-tdb.c: Opened TDB database '/home/joe/.pulse/64241363ff22789c833f658a0000017e-device-volumes.tdb'
    I: module-device-restore.c: Sucessfully opened database file '/home/joe/.pulse/64241363ff22789c833f658a0000017e-device-volumes'.
    I: module.c: Loaded "module-device-restore" (index: #0; argument: "").
    D: database-tdb.c: Opened TDB database '/home/joe/.pulse/64241363ff22789c833f658a0000017e-stream-volumes.tdb'
    I: module-stream-restore.c: Sucessfully opened database file '/home/joe/.pulse/64241363ff22789c833f658a0000017e-stream-volumes'.
    I: module.c: Loaded "module-stream-restore" (index: #1; argument: "").
    D: database-tdb.c: Opened TDB database '/home/joe/.pulse/64241363ff22789c833f658a0000017e-card-database.tdb'
    I: module-card-restore.c: Sucessfully opened database file '/home/joe/.pulse/64241363ff22789c833f658a0000017e-card-database'.
    I: module.c: Loaded "module-card-restore" (index: #2; argument: "").
    I: module.c: Loaded "module-augment-properties" (index: #3; argument: "").
    D: cli-command.c: Checking for existance of '/usr/lib/pulse-0.9.22/modules/module-udev-detect.so': success
    D: module-udev-detect.c: /dev/snd/controlC0 is accessible: yes
    D: module-udev-detect.c: /devices/pci0000:00/0000:00:09.0/sound/card0 is busy: no
    D: module-udev-detect.c: Loading module-alsa-card with arguments 'device_id="0" name="pci-0000_00_09.0" card_name="alsa_card.pci-0000_00_09.0" tsched=yes ignore_dB=no card_properties="module-udev-detect.discovered=1"'
    D: dbus-util.c: Successfully connected to D-Bus session bus 5d1c9544f743b93ededa7ef20000004b as :1.110
    D: reserve-wrap.c: Successfully acquired reservation lock on device 'Audio0'
    D: alsa-mixer.c: Looking at profile output:analog-mono
    D: alsa-mixer.c: Checking for playback on Analog Mono (analog-mono)
    D: alsa-util.c: Trying hw:0 with SND_PCM_NO_AUTO_FORMAT ...
    D: alsa-util.c: Managed to open hw:0
    D: alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
    D: alsa-util.c: Trying hw:0 without SND_PCM_NO_AUTO_FORMAT ...
    D: alsa-util.c: Managed to open hw:0
    D: alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
    D: alsa-util.c: Trying plug:hw:0 with SND_PCM_NO_AUTO_FORMAT ...
    D: alsa-util.c: Managed to open plug:hw:0
    D: alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
    D: alsa-util.c: Trying plug:hw:0 without SND_PCM_NO_AUTO_FORMAT ...
    D: alsa-util.c: Managed to open plug:hw:0
    D: alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
    I: alsa-util.c: Failed to set hardware parameters on plug:hw:0: Invalid argument
    D: alsa-mixer.c: Looking at profile output:analog-mono+input:analog-mono
    D: alsa-mixer.c: Checking for playback on Analog Mono (analog-mono)
    D: alsa-util.c: Trying hw:0 with SND_PCM_NO_AUTO_FORMAT ...
    D: alsa-util.c: Managed to open hw:0
    D: alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
    D: alsa-util.c: Trying hw:0 without SND_PCM_NO_AUTO_FORMAT ...
    D: alsa-util.c: Managed to open hw:0
    D: alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
    D: alsa-util.c: Trying plug:hw:0 with SND_PCM_NO_AUTO_FORMAT ...
    D: alsa-util.c: Managed to open plug:hw:0
    D: alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
    D: alsa-util.c: Trying plug:hw:0 without SND_PCM_NO_AUTO_FORMAT ...
    D: alsa-util.c: Managed to open plug:hw:0
    D: alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
    I: alsa-util.c: Failed to set hardware parameters on plug:hw:0: Invalid argument
    D: alsa-mixer.c: Looking at profile output:analog-mono+input:analog-stereo
    D: alsa-mixer.c: Checking for playback on Analog Mono (analog-mono)
    D: alsa-util.c: Trying hw:0 with SND_PCM_NO_AUTO_FORMAT ...
    D: alsa-util.c: Managed to open hw:0
    D: alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
    D: alsa-util.c: Trying hw:0 without SND_PCM_NO_AUTO_FORMAT ...
    D: alsa-util.c: Managed to open hw:0
    D: alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
    D: alsa-util.c: Trying plug:hw:0 with SND_PCM_NO_AUTO_FORMAT ...
    D: alsa-util.c: Managed to open plug:hw:0
    D: alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
    D: alsa-util.c: Trying plug:hw:0 without SND_PCM_NO_AUTO_FORMAT ...
    D: alsa-util.c: Managed to open plug:hw:0
    D: alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
    I: alsa-util.c: Failed to set hardware parameters on plug:hw:0: Invalid argument
    D: alsa-mixer.c: Looking at profile output:analog-mono+input:iec958-stereo
    D: alsa-mixer.c: Checking for playback on Analog Mono (analog-mono)
    D: alsa-util.c: Trying hw:0 with SND_PCM_NO_AUTO_FORMAT ...
    D: alsa-util.c: Managed to open hw:0
    D: alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
    D: alsa-util.c: Trying hw:0 without SND_PCM_NO_AUTO_FORMAT ...
    D: alsa-util.c: Managed to open hw:0
    D: alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
    D: alsa-util.c: Trying plug:hw:0 with SND_PCM_NO_AUTO_FORMAT ...
    D: alsa-util.c: Managed to open plug:hw:0
    D: alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
    D: alsa-util.c: Trying plug:hw:0 without SND_PCM_NO_AUTO_FORMAT ...
    D: alsa-util.c: Managed to open plug:hw:0
    D: alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
    I: alsa-util.c: Failed to set hardware parameters on plug:hw:0: Invalid argument
    D: alsa-mixer.c: Looking at profile output:analog-mono+input:iec958-surround-40
    D: alsa-mixer.c: Checking for playback on Analog Mono (analog-mono)
    D: alsa-util.c: Trying hw:0 with SND_PCM_NO_AUTO_FORMAT ...
    D: alsa-util.c: Managed to open hw:0
    D: alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
    D: alsa-util.c: Trying hw:0 without SND_PCM_NO_AUTO_FORMAT ...
    D: alsa-util.c: Managed to open hw:0
    D: alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
    D: alsa-util.c: Trying plug:hw:0 with SND_PCM_NO_AUTO_FORMAT ...
    D: alsa-util.c: Managed to open plug:hw:0
    D: alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
    D: alsa-util.c: Trying plug:hw:0 without SND_PCM_NO_AUTO_FORMAT ...
    D: alsa-util.c: Managed to open plug:hw:0
    D: alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
    I: alsa-util.c: Failed to set hardware parameters on plug:hw:0: Invalid argument
    D: alsa-mixer.c: Looking at profile output:analog-stereo
    D: alsa-mixer.c: Checking for playback on Analog Stereo (analog-stereo)
    D: alsa-util.c: Trying front:0 with SND_PCM_NO_AUTO_FORMAT ...
    D: alsa-util.c: Managed to open front:0
    D: alsa-util.c: Maximum hw buffer size is 341 ms
    D: alsa-util.c: Set buffer size first (to 4800 samples), period size second (to 1200 samples).
    D: alsa-mixer.c: Profile output:analog-stereo supported.
    D: alsa-mixer.c: Looking at profile output:analog-stereo+input:analog-mono
    D: alsa-mixer.c: Checking for recording on Analog Mono (analog-mono)
    D: alsa-util.c: Trying hw:0 with SND_PCM_NO_AUTO_FORMAT ...
    D: alsa-util.c: Managed to open hw:0
    D: alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
    D: alsa-util.c: Trying hw:0 without SND_PCM_NO_AUTO_FORMAT ...
    D: alsa-util.c: Managed to open hw:0
    D: alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
    D: alsa-util.c: Trying plug:hw:0 with SND_PCM_NO_AUTO_FORMAT ...
    D: alsa-util.c: Managed to open plug:hw:0
    D: alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
    D: alsa-util.c: Trying plug:hw:0 without SND_PCM_NO_AUTO_FORMAT ...
    D: alsa-util.c: Managed to open plug:hw:0
    D: alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
    I: alsa-util.c: Failed to set hardware parameters on plug:hw:0: Invalid argument
    D: alsa-mixer.c: Looking at profile output:analog-stereo+input:analog-stereo
    D: alsa-mixer.c: Checking for recording on Analog Stereo (analog-stereo)
    D: alsa-util.c: Trying front:0 with SND_PCM_NO_AUTO_FORMAT ...
    D: alsa-util.c: Managed to open front:0
    D: alsa-util.c: Maximum hw buffer size is 341 ms
    D: alsa-util.c: Set buffer size first (to 4800 samples), period size second (to 1200 samples).
    D: alsa-mixer.c: Profile output:analog-stereo+input:analog-stereo supported.
    D: alsa-mixer.c: Looking at profile output:analog-stereo+input:iec958-stereo
    D: alsa-mixer.c: Checking for recording on Digital Stereo (IEC958) (iec958-stereo)
    D: alsa-util.c: Trying iec958:0 with SND_PCM_NO_AUTO_FORMAT ...
    I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC0D1c' failed (-2)
    I: alsa-util.c: Error opening PCM device iec958:0: No such file or directory
    D: alsa-mixer.c: Looking at profile output:analog-stereo+input:iec958-surround-40
    D: alsa-mixer.c: Checking for recording on Digital Surround 4.0 (IEC958) (iec958-surround-40)
    D: alsa-util.c: Trying iec958:0 with SND_PCM_NO_AUTO_FORMAT ...
    I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC0D1c' failed (-2)
    I: alsa-util.c: Error opening PCM device iec958:0: No such file or directory
    D: alsa-mixer.c: Looking at profile output:analog-surround-40
    D: alsa-mixer.c: Checking for playback on Analog Surround 4.0 (analog-surround-40)
    D: alsa-util.c: Trying surround40:0 with SND_PCM_NO_AUTO_FORMAT ...
    D: alsa-util.c: Managed to open surround40:0
    D: alsa-util.c: Maximum hw buffer size is 170 ms
    D: alsa-util.c: Set buffer size first (to 4800 samples), period size second (to 1200 samples).
    D: alsa-mixer.c: Profile output:analog-surround-40 supported.
    D: alsa-mixer.c: Looking at profile output:analog-surround-40+input:analog-mono
    D: alsa-mixer.c: Checking for recording on Analog Mono (analog-mono)
    D: alsa-util.c: Trying hw:0 with SND_PCM_NO_AUTO_FORMAT ...
    D: alsa-util.c: Managed to open hw:0
    D: alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
    D: alsa-util.c: Trying hw:0 without SND_PCM_NO_AUTO_FORMAT ...
    D: alsa-util.c: Managed to open hw:0
    D: alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
    D: alsa-util.c: Trying plug:hw:0 with SND_PCM_NO_AUTO_FORMAT ...
    D: alsa-util.c: Managed to open plug:hw:0
    D: alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
    D: alsa-util.c: Trying plug:hw:0 without SND_PCM_NO_AUTO_FORMAT ...
    D: alsa-util.c: Managed to open plug:hw:0
    D: alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
    I: alsa-util.c: Failed to set hardware parameters on plug:hw:0: Invalid argument
    D: alsa-mixer.c: Looking at profile output:analog-surround-40+input:analog-stereo
    D: alsa-mixer.c: Checking for recording on Analog Stereo (analog-stereo)
    D: alsa-util.c: Trying front:0 with SND_PCM_NO_AUTO_FORMAT ...
    D: alsa-util.c: Managed to open front:0
    D: alsa-util.c: Maximum hw buffer size is 341 ms
    D: alsa-util.c: Set buffer size first (to 4800 samples), period size second (to 1200 samples).
    D: alsa-mixer.c: Profile output:analog-surround-40+input:analog-stereo supported.
    D: alsa-mixer.c: Looking at profile output:analog-surround-40+input:iec958-stereo
    D: alsa-mixer.c: Checking for recording on Digital Stereo (IEC958) (iec958-stereo)
    D: alsa-util.c: Trying iec958:0 with SND_PCM_NO_AUTO_FORMAT ...
    I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC0D1c' failed (-2)
    I: alsa-util.c: Error opening PCM device iec958:0: No such file or directory
    D: alsa-mixer.c: Looking at profile output:analog-surround-40+input:iec958-surround-40
    D: alsa-mixer.c: Checking for recording on Digital Surround 4.0 (IEC958) (iec958-surround-40)
    D: alsa-util.c: Trying iec958:0 with SND_PCM_NO_AUTO_FORMAT ...
    I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC0D1c' failed (-2)
    I: alsa-util.c: Error opening PCM device iec958:0: No such file or directory
    D: alsa-mixer.c: Looking at profile output:analog-surround-41
    D: alsa-mixer.c: Checking for playback on Analog Surround 4.1 (analog-surround-41)
    D: alsa-util.c: Trying surround41:0 with SND_PCM_NO_AUTO_FORMAT ...
    D: alsa-util.c: Managed to open surround41:0
    D: alsa-util.c: Maximum hw buffer size is 113 ms
    D: alsa-util.c: Set buffer size first (to 4800 samples), period size second (to 1200 samples).
    D: alsa-mixer.c: Profile output:analog-surround-41 supported.
    D: alsa-mixer.c: Looking at profile output:analog-surround-41+input:analog-mono
    D: alsa-mixer.c: Checking for recording on Analog Mono (analog-mono)
    D: alsa-util.c: Trying hw:0 with SND_PCM_NO_AUTO_FORMAT ...
    D: alsa-util.c: Managed to open hw:0
    D: alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
    D: alsa-util.c: Trying hw:0 without SND_PCM_NO_AUTO_FORMAT ...
    D: alsa-util.c: Managed to open hw:0
    D: alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
    D: alsa-util.c: Trying plug:hw:0 with SND_PCM_NO_AUTO_FORMAT ...
    D: alsa-util.c: Managed to open plug:hw:0
    D: alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
    D: alsa-util.c: Trying plug:hw:0 without SND_PCM_NO_AUTO_FORMAT ...
    D: alsa-util.c: Managed to open plug:hw:0
    D: alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
    I: alsa-util.c: Failed to set hardware parameters on plug:hw:0: Invalid argument
    D: alsa-mixer.c: Looking at profile output:analog-surround-41+input:analog-stereo
    D: alsa-mixer.c: Checking for recording on Analog Stereo (analog-stereo)
    D: alsa-util.c: Trying front:0 with SND_PCM_NO_AUTO_FORMAT ...
    D: alsa-util.c: Managed to open front:0
    D: alsa-util.c: Maximum hw buffer size is 341 ms
    D: alsa-util.c: Set buffer size first (to 4800 samples), period size second (to 1200 samples).
    D: alsa-mixer.c: Profile output:analog-surround-41+input:analog-stereo supported.
    D: alsa-mixer.c: Looking at profile output:analog-surround-41+input:iec958-stereo
    D: alsa-mixer.c: Checking for recording on Digital Stereo (IEC958) (iec958-stereo)
    D: alsa-util.c: Trying iec958:0 with SND_PCM_NO_AUTO_FORMAT ...
    I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC0D1c' failed (-2)
    I: alsa-util.c: Error opening PCM device iec958:0: No such file or directory
    D: alsa-mixer.c: Looking at profile output:analog-surround-41+input:iec958-surround-40
    D: alsa-mixer.c: Checking for recording on Digital Surround 4.0 (IEC958) (iec958-surround-40)
    D: alsa-util.c: Trying iec958:0 with SND_PCM_NO_AUTO_FORMAT ...
    I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC0D1c' failed (-2)
    I: alsa-util.c: Error opening PCM device iec958:0: No such file or directory
    D: alsa-mixer.c: Looking at profile output:analog-surround-50
    D: alsa-mixer.c: Checking for playback on Analog Surround 5.0 (analog-surround-50)
    D: alsa-util.c: Trying surround50:0 with SND_PCM_NO_AUTO_FORMAT ...
    D: alsa-util.c: Managed to open surround50:0
    D: alsa-util.c: Maximum hw buffer size is 113 ms
    D: alsa-util.c: Set buffer size first (to 4800 samples), period size second (to 1200 samples).
    D: alsa-mixer.c: Profile output:analog-surround-50 supported.
    D: alsa-mixer.c: Looking at profile output:analog-surround-50+input:analog-mono
    D: alsa-mixer.c: Checking for recording on Analog Mono (analog-mono)
    D: alsa-util.c: Trying hw:0 with SND_PCM_NO_AUTO_FORMAT ...
    D: alsa-util.c: Managed to open hw:0
    D: alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
    D: alsa-util.c: Trying hw:0 without SND_PCM_NO_AUTO_FORMAT ...
    D: alsa-util.c: Managed to open hw:0
    D: alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
    D: alsa-util.c: Trying plug:hw:0 with SND_PCM_NO_AUTO_FORMAT ...
    D: alsa-util.c: Managed to open plug:hw:0
    D: alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
    D: alsa-util.c: Trying plug:hw:0 without SND_PCM_NO_AUTO_FORMAT ...
    D: alsa-util.c: Managed to open plug:hw:0
    D: alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
    I: alsa-util.c: Failed to set hardware parameters on plug:hw:0: Invalid argument
    D: alsa-mixer.c: Looking at profile output:analog-surround-50+input:analog-stereo
    D: alsa-mixer.c: Checking for recording on Analog Stereo (analog-stereo)
    D: alsa-util.c: Trying front:0 with SND_PCM_NO_AUTO_FORMAT ...
    D: alsa-util.c: Managed to open front:0
    D: alsa-util.c: Maximum hw buffer size is 341 ms
    D: alsa-util.c: Set buffer size first (to 4800 samples), period size second (to 1200 samples).
    D: alsa-mixer.c: Profile output:analog-surround-50+input:analog-stereo supported.
    D: alsa-mixer.c: Looking at profile output:analog-surround-50+input:iec958-stereo
    D: alsa-mixer.c: Checking for recording on Digital Stereo (IEC958) (iec958-stereo)
    D: alsa-util.c: Trying iec958:0 with SND_PCM_NO_AUTO_FORMAT ...
    I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC0D1c' failed (-2)
    I: alsa-util.c: Error opening PCM device iec958:0: No such file or directory
    D: alsa-mixer.c: Looking at profile output:analog-surround-50+input:iec958-surround-40
    D: alsa-mixer.c: Checking for recording on Digital Surround 4.0 (IEC958) (iec958-surround-40)
    D: alsa-util.c: Trying iec958:0 with SND_PCM_NO_AUTO_FORMAT ...
    I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC0D1c' failed (-2)
    I: alsa-util.c: Error opening PCM device iec958:0: No such file or directory
    D: alsa-mixer.c: Looking at profile output:analog-surround-51
    D: alsa-mixer.c: Checking for playback on Analog Surround 5.1 (analog-surround-51)
    D: alsa-util.c: Trying surround51:0 with SND_PCM_NO_AUTO_FORMAT ...
    D: alsa-util.c: Managed to open surround51:0
    D: alsa-util.c: Maximum hw buffer size is 113 ms
    D: alsa-util.c: Set buffer size first (to 4800 samples), period size second (to 1200 samples).
    D: alsa-mixer.c: Profile output:analog-surround-51 supported.
    D: alsa-mixer.c: Looking at profile output:analog-surround-51+input:analog-mono
    D: alsa-mixer.c: Checking for recording on Analog Mono (analog-mono)
    D: alsa-util.c: Trying hw:0 with SND_PCM_NO_AUTO_FORMAT ...
    D: alsa-util.c: Managed to open hw:0
    D: alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
    D: alsa-util.c: Trying hw:0 without SND_PCM_NO_AUTO_FORMAT ...
    D: alsa-util.c: Managed to open hw:0
    D: alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
    D: alsa-util.c: Trying plug:hw:0 with SND_PCM_NO_AUTO_FORMAT ...
    D: alsa-util.c: Managed to open plug:hw:0
    D: alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
    D: alsa-util.c: Trying plug:hw:0 without SND_PCM_NO_AUTO_FORMAT ...
    D: alsa-util.c: Managed to open plug:hw:0
    D: alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
    I: alsa-util.c: Failed to set hardware parameters on plug:hw:0: Invalid argument
    D: alsa-mixer.c: Looking at profile output:analog-surround-51+input:analog-stereo
    D: alsa-mixer.c: Checking for recording on Analog Stereo (analog-stereo)
    D: alsa-util.c: Trying front:0 with SND_PCM_NO_AUTO_FORMAT ...
    D: alsa-util.c: Managed to open front:0
    D: alsa-util.c: Maximum hw buffer size is 341 ms
    D: alsa-util.c: Set buffer size first (to 4800 samples), period size second (to 1200 samples).
    D: alsa-mixer.c: Profile output:analog-surround-51+input:analog-stereo supported.
    D: alsa-mixer.c: Looking at profile output:analog-surround-51+input:iec958-stereo
    D: alsa-mixer.c: Checking for recording on Digital Stereo (IEC958) (iec958-stereo)
    D: alsa-util.c: Trying iec958:0 with SND_PCM_NO_AUTO_FORMAT ...
    I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC0D1c' failed (-2)
    I: alsa-util.c: Error opening PCM device iec958:0: No such file or directory
    D: alsa-mixer.c: Looking at profile output:analog-surround-51+input:iec958-surround-40
    D: alsa-mixer.c: Checking for recording on Digital Surround 4.0 (IEC958) (iec958-surround-40)
    D: alsa-util.c: Trying iec958:0 with SND_PCM_NO_AUTO_FORMAT ...
    I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC0D1c' failed (-2)
    I: alsa-util.c: Error opening PCM device iec958:0: No such file or directory
    D: alsa-mixer.c: Looking at profile output:analog-surround-71
    D: alsa-mixer.c: Checking for playback on Analog Surround 7.1 (analog-surround-71)
    D: alsa-util.c: Trying surround71:0 with SND_PCM_NO_AUTO_FORMAT ...
    D: alsa-util.c: Managed to open surround71:0
    D: alsa-util.c: Maximum hw buffer size is 85 ms
    D: alsa-util.c: Set buffer size first (to 4800 samples), period size second (to 1200 samples).
    D: alsa-mixer.c: Profile output:analog-surround-71 supported.
    D: alsa-mixer.c: Looking at profile output:analog-surround-71+input:analog-mono
    D: alsa-mixer.c: Checking for recording on Analog Mono (analog-mono)
    D: alsa-util.c: Trying hw:0 with SND_PCM_NO_AUTO_FORMAT ...
    D: alsa-util.c: Managed to open hw:0
    D: alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
    D: alsa-util.c: Trying hw:0 without SND_PCM_NO_AUTO_FORMAT ...
    D: alsa-util.c: Managed to open hw:0
    D: alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
    D: alsa-util.c: Trying plug:hw:0 with SND_PCM_NO_AUTO_FORMAT ...
    D: alsa-util.c: Managed to open plug:hw:0
    D: alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
    D: alsa-util.c: Trying plug:hw:0 without SND_PCM_NO_AUTO_FORMAT ...
    D: alsa-util.c: Managed to open plug:hw:0
    D: alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
    I: alsa-util.c: Failed to set hardware parameters on plug:hw:0: Invalid argument
    D: alsa-mixer.c: Looking at profile output:analog-surround-71+input:analog-stereo
    D: alsa-mixer.c: Checking for recording on Analog Stereo (analog-stereo)
    D: alsa-util.c: Trying front:0 with SND_PCM_NO_AUTO_FORMAT ...
    D: alsa-util.c: Managed to open front:0
    D: alsa-util.c: Maximum hw buffer size is 341 ms
    D: alsa-util.c: Set buffer size first (to 4800 samples), period size second (to 1200 samples).
    D: alsa-mixer.c: Profile output:analog-surround-71+input:analog-stereo supported.
    D: alsa-mixer.c: Looking at profile output:analog-surround-71+input:iec958-stereo
    D: alsa-mixer.c: Checking for recording on Digital Stereo (IEC958) (iec958-stereo)
    D: alsa-util.c: Trying iec958:0 with SND_PCM_NO_AUTO_FORMAT ...
    I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC0D1c' failed (-2)
    I: alsa-util.c: Error opening PCM device iec958:0: No such file or directory
    D: alsa-mixer.c: Looking at profile output:analog-surround-71+input:iec958-surround-40
    D: alsa-mixer.c: Checking for recording on Digital Surround 4.0 (IEC958) (iec958-surround-40)
    D: alsa-util.c: Trying iec958:0 with SND_PCM_NO_AUTO_FORMAT ...
    I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC0D1c' failed (-2)
    I: alsa-util.c: Error opening PCM device iec958:0: No such file or directory
    D: alsa-mixer.c: Looking at profile output:iec958-stereo
    D: alsa-mixer.c: Checking for playback on Digital Stereo (IEC958) (iec958-stereo)
    D: alsa-util.c: Trying iec958:0 with SND_PCM_NO_AUTO_FORMAT ...
    D: alsa-util.c: Managed to open iec958:0
    D: alsa-util.c: Maximum hw buffer size is 341 ms
    D: alsa-util.c: Set buffer size first (to 4800 samples), period size second (to 1200 samples).
    D: alsa-mixer.c: Profile output:iec958-stereo supported.
    D: alsa-mixer.c: Looking at profile output:iec958-stereo+input:analog-mono
    D: alsa-mixer.c: Checking for recording on Analog Mono (analog-mono)
    D: alsa-util.c: Trying hw:0 with SND_PCM_NO_AUTO_FORMAT ...
    D: alsa-util.c: Managed to open hw:0
    D: alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
    D: alsa-util.c: Trying hw:0 without SND_PCM_NO_AUTO_FORMAT ...
    D: alsa-util.c: Managed to open hw:0
    D: alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
    D: alsa-util.c: Trying plug:hw:0 with SND_PCM_NO_AUTO_FORMAT ...
    D: alsa-util.c: Managed to open plug:hw:0
    D: alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
    D: alsa-util.c: Trying plug:hw:0 without SND_PCM_NO_AUTO_FORMAT ...
    D: alsa-util.c: Managed to open plug:hw:0
    D: alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
    I: alsa-util.c: Failed to set hardware parameters on plug:hw:0: Invalid argument
    D: alsa-mixer.c: Looking at profile output:iec958-stereo+input:analog-stereo
    D: alsa-mixer.c: Checking for recording on Analog Stereo (analog-stereo)
    D: alsa-util.c: Trying front:0 with SND_PCM_NO_AUTO_FORMAT ...
    D: alsa-util.c: Managed to open front:0
    D: alsa-util.c: Maximum hw buffer size is 341 ms
    D: alsa-util.c: Set buffer size first (to 4800 samples), period size second (to 1200 samples).
    D: alsa-mixer.c: Profile output:iec958-stereo+input:analog-stereo supported.
    D: alsa-mixer.c: Looking at profile output:iec958-stereo+input:iec958-stereo
    D: alsa-mixer.c: Checking for recording on Digital Stereo (IEC958) (iec958-stereo)
    D: alsa-util.c: Trying iec958:0 with SND_PCM_NO_AUTO_FORMAT ...
    I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC0D1c' failed (-2)
    I: alsa-util.c: Error opening PCM device iec958:0: No such file or directory
    D: alsa-mixer.c: Looking at profile output:iec958-stereo+input:iec958-surround-40
    D: alsa-mixer.c: Checking for recording on Digital Surround 4.0 (IEC958) (iec958-surround-40)
    D: alsa-util.c: Trying iec958:0 with SND_PCM_NO_AUTO_FORMAT ...
    I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC0D1c' failed (-2)
    I: alsa-util.c: Error opening PCM device iec958:0: No such file or directory
    D: alsa-mixer.c: Looking at profile output:iec958-surround-40
    D: alsa-mixer.c: Checking for playback on Digital Surround 4.0 (IEC958) (iec958-surround-40)
    D: alsa-util.c: Trying iec958:0 with SND_PCM_NO_AUTO_FORMAT ...
    D: alsa-util.c: Managed to open iec958:0
    D: alsa-util.c: snd_pcm_hw_params_set_channels(4) failed: Invalid argument
    D: alsa-util.c: Trying iec958:0 without SND_PCM_NO_AUTO_FORMAT ...
    D: alsa-util.c: Managed to open iec958:0
    D: alsa-util.c: snd_pcm_hw_params_set_channels(4) failed: Invalid argument
    D: alsa-util.c: Trying plug:iec958:0 with SND_PCM_NO_AUTO_FORMAT ...
    D: alsa-util.c: Managed to open plug:iec958:0
    D: alsa-util.c: snd_pcm_hw_params_set_channels(4) failed: Invalid argument
    D: alsa-util.c: Trying plug:iec958:0 without SND_PCM_NO_AUTO_FORMAT ...
    D: alsa-util.c: Managed to open plug:iec958:0
    D: alsa-util.c: snd_pcm_hw_params_set_channels(4) failed: Invalid argument
    I: alsa-util.c: Failed to set hardware parameters on plug:iec958:0: Invalid argument
    D: alsa-mixer.c: Looking at profile output:iec958-surround-40+input:analog-mono
    D: alsa-mixer.c: Checking for playback on Digital Surround 4.0 (IEC958) (iec958-surround-40)
    D: alsa-util.c: Trying iec958:0 with SND_PCM_NO_AUTO_FORMAT ...
    D: alsa-util.c: Managed to open iec958:0
    D: alsa-util.c: snd_pcm_hw_params_set_channels(4) failed: Invalid argument
    D: alsa-util.c: Trying iec958:0 without SND_PCM_NO_AUTO_FORMAT ...
    D: alsa-util.c: Managed to open iec958:0
    D: alsa-util.c: snd_pcm_hw_params_set_channels(4) failed: Invalid argument
    D: alsa-util.c: Trying plug:iec958:0 with SND_PCM_NO_AUTO_FORMAT ...
    D: alsa-util.c: Managed to open plug:iec958:0
    D: alsa-util.c: snd_pcm_hw_params_set_channels(4) failed: Invalid argument
    D: alsa-util.c: Trying plug:iec958:0 without SND_PCM_NO_AUTO_FORMAT ...
    D: alsa-util.c: Managed to open plug:iec958:0
    D: alsa-util.c: snd_pcm_hw_params_set_channels(4) failed: Invalid argument
    I: alsa-util.c: Failed to set hardware parameters on plug:iec958:0: Invalid argument
    D: alsa-mixer.c: Looking at profile output:iec958-surround-40+input:analog-stereo
    D: alsa-mixer.c: Checking for playback on Digital Surround 4.0 (IEC958) (iec958-surround-40)
    D: alsa-util.c: Trying iec958:0 with SND_PCM_NO_AUTO_FORMAT ...
    D: alsa-util.c: Managed to open iec958:0
    D: alsa-util.c: snd_pcm_hw_params_set_channels(4) failed: Invalid argument
    D: alsa-util.c: Trying iec958:0 without SND_PCM_NO_AUTO_FORMAT ...
    D: alsa-util.c: Managed to open iec958:0
    D: alsa-util.c: snd_pcm_hw_params_set_channels(4) failed: Invalid argument
    D: alsa-util.c: Trying plug:iec958:0 with SND_PCM_NO_AUTO_FORMAT ...
    D: alsa-util.c: Managed to open plug:iec958:0
    D: alsa-util.c: snd_pcm_hw_params_set_channels(4) failed: Invalid argument
    D: alsa-util.c: Trying plug:iec958:0 without SND_PCM_NO_AUTO_FORMAT ...
    D: alsa-util.c: Managed to open plug:iec958:0
    D: alsa-util.c: snd_pcm_hw_params_set_channels(4) failed: Invalid argument
    I: alsa-util.c: Failed to set hardware parameters on plug:iec958:0: Invalid argument
    D: alsa-mixer.c: Looking at profile output:iec958-surround-40+input:iec958-stereo
    D: alsa-mixer.c: Checking for playback on Digital Surround 4.0 (IEC958) (iec958-surround-40)
    D: alsa-util.c: Trying iec958:0 with SND_PCM_NO_AUTO_FORMAT ...
    D: alsa-util.c: Managed to open iec958:0
    D: alsa-util.c: snd_pcm_hw_params_set_channels(4) failed: Invalid argument
    D: alsa-util.c: Trying iec958:0 without SND_PCM_NO_AUTO_FORMAT ...
    D: alsa-util.c: Managed to open iec958:0
    D: alsa-util.c: snd_pcm_hw_params_set_channels(4) failed: Invalid argument
    D: alsa-util.c: Trying plug:iec958:0 with SND_PCM_NO_AUTO_FORMAT ...
    D: alsa-util.c: Managed to open plug:iec958:0
    D: alsa-util.c: snd_pcm_hw_params_set_channels(4) failed: Invalid argument
    D: alsa-util.c: Trying plug:iec958:0 without SND_PCM_NO_AUTO_FORMAT ...
    D: alsa-util.c: Managed to open plug:iec958:0
    D: alsa-util.c: snd_pcm_hw_params_set_channels(4) failed: Invalid argument
    I: alsa-util.c: Failed to set hardware parameters on plug:iec958:0: Invalid argument
    D: alsa-mixer.c: Looking at profile output:iec958-surround-40+input:iec958-surround-40
    D: alsa-mixer.c: Checking for playback on Digital Surround 4.0 (IEC958) (iec958-surround-40)
    D: alsa-util.c: Trying iec958:0 with SND_PCM_NO_AUTO_FORMAT ...
    D: alsa-util.c: Managed to open iec958:0
    D: alsa-util.c: snd_pcm_hw_params_set_channels(4) failed: Invalid argument
    D: alsa-util.c: Trying iec958:0 without SND_PCM_NO_AUTO_FORMAT ...
    D: alsa-util.c: Managed to open iec958:0
    D: alsa-util.c: snd_pcm_hw_params_set_channels(4) failed: Invalid argument
    D: alsa-util.c: Trying plug:iec958:0 with SND_PCM_NO_AUTO_FORMAT ...
    D: alsa-util.c: Managed to open plug:iec958:0
    D: alsa-util.c: snd_pcm_hw_params_set_channels(4) failed: Invalid argument
    D: alsa-util.c: Trying plug:iec958:0 without SND_PCM_NO_AUTO_FORMAT ...
    D: alsa-util.c: Managed to open plug:iec958:0
    D: alsa-util.c: snd_pcm_hw_params_set_channels(4) failed: Invalid argument
    I: alsa-util.c: Failed to set hardware parameters on plug:iec958:0: Invalid argument
    D: alsa-mixer.c: Looking at profile output:iec958-ac3-surround-40
    D: alsa-mixer.c: Checking for playback on Digital Surround 4.0 (IEC958/AC3) (iec958-ac3-surround-40)
    D: alsa-util.c: Trying a52:0 with SND_PCM_NO_AUTO_FORMAT ...
    I: (alsa-lib)pcm.c: Unknown PCM a52:0
    I: alsa-util.c: Error opening PCM device a52:0: No such file or directory
    D: alsa-mixer.c: Looking at profile output:iec958-ac3-surround-40+input:analog-mono
    D: alsa-mixer.c: Checking for playback on Digital Surround 4.0 (IEC958/AC3) (iec958-ac3-surround-40)
    D: alsa-util.c: Trying a52:0 with SND_PCM_NO_AUTO_FORMAT ...
    I: (alsa-lib)pcm.c: Unknown PCM a52:0
    I: alsa-util.c: Error opening PCM device a52:0: No such file or directory
    D: alsa-mixer.c: Looking at profile output:iec958-ac3-surround-40+input:analog-stereo
    D: alsa-mixer.c: Checking for playback on Digital Surround 4.0 (IEC958/AC3) (iec958-ac3-surround-40)
    D: alsa-util.c: Trying a52:0 with SND_PCM_NO_AUTO_FORMAT ...
    I: (alsa-lib)pcm.c: Unknown PCM a52:0
    I: alsa-util.c: Error opening PCM device a52:0: No such file or directory
    D: alsa-mixer.c: Looking at profile output:iec958-ac3-surround-40+input:iec958-stereo
    D: alsa-mixer.c: Checking for playback on Digital Surround 4.0 (IEC958/AC3) (iec958-ac3-surround-40)
    D: alsa-util.c: Trying a52:0 with SND_PCM_NO_AUTO_FORMAT ...
    I: (alsa-lib)pcm.c: Unknown PCM a52:0
    I: alsa-util.c: Error opening PCM device a52:0: No such file or directory
    D: alsa-mixer.c: Looking at profile output:iec958-ac3-surround-40+input:iec958-surround-40
    D: alsa-mixer.c: Checking for playback on Digital Surround 4.0 (IEC958/AC3) (iec958-ac3-surround-40)
    D: alsa-util.c: Trying a52:0 with SND_PCM_NO_AUTO_FORMAT ...
    I: (alsa-lib)pcm.c: Unknown PCM a52:0
    I: alsa-util.c: Error opening PCM device a52:0: No such file or directory
    D: alsa-mixer.c: Looking at profile output:iec958-ac3-surround-51
    D: alsa-mixer.c: Checking for playback on Digital Surround 5.1 (IEC958/AC3) (iec958-ac3-surround-51)
    D: alsa-util.c: Trying a52:0 with SND_PCM_NO_AUTO_FORMAT ...
    I: (alsa-lib)pcm.c: Unknown PCM a52:0
    I: alsa-util.c: Error opening PCM device a52:0: No such file or directory
    D: alsa-mixer.c: Looking at profile output:iec958-ac3-surround-51+input:analog-mono
    D: alsa-mixer.c: Checking for playback on Digital Surround 5.1 (IEC958/AC3) (iec958-ac3-surround-51)
    D: alsa-util.c: Trying a52:0 with SND_PCM_NO_AUTO_FORMAT ...
    I: (alsa-lib)pcm.c: Unknown PCM a52:0
    I: alsa-util.c: Error opening PCM device a52:0: No such file or directory
    D: alsa-mixer.c: Looking at profile output:iec958-ac3-surround-51+input:analog-stereo
    D: alsa-mixer.c: Checking for playback on Digital Surround 5.1 (IEC958/AC3) (iec958-ac3-surround-51)
    D: alsa-util.c: Trying a52:0 with SND_PCM_NO_AUTO_FORMAT ...
    I: (alsa-lib)pcm.c: Unknown PCM a52:0
    I: alsa-util.c: Error opening PCM device a52:0: No such file or directory
    D: alsa-mixer.c: Looking at profile output:iec958-ac3-surround-51+input:iec958-stereo
    D: alsa-mixer.c: Checking for playback on Digital Surround 5.1 (IEC958/AC3) (iec958-ac3-surround-51)
    D: alsa-util.c: Trying a52:0 with SND_PCM_NO_AUTO_FORMAT ...
    I: (alsa-lib)pcm.c: Unknown PCM a52:0
    I: alsa-util.c: Error opening PCM device a52:0: No such file or directory
    D: alsa-mixer.c: Looking at profile output:iec958-ac3-surround-51+input:iec958-surround-40
    D: alsa-mixer.c: Checking for playback on Digital Surround 5.1 (IEC958/AC3) (iec958-ac3-surround-51)
    D: alsa-util.c: Trying a52:0 with SND_PCM_NO_AUTO_FORMAT ...
    I: (alsa-lib)pcm.c: Unknown PCM a52:0
    I: alsa-util.c: Error opening PCM device a52:0: No such file or directory
    D: alsa-mixer.c: Looking at profile output:hdmi-stereo
    D: alsa-mixer.c: Checking for playback on Digital Stereo (HDMI) (hdmi-stereo)
    D: alsa-util.c: Trying hdmi:0 with SND_PCM_NO_AUTO_FORMAT ...
    D: alsa-util.c: Managed to open hdmi:0
    D: alsa-util.c: Maximum hw buffer size is 341 ms
    D: alsa-util.c: Set buffer size first (to 4800 samples), period size second (to 1200 samples).
    D: alsa-mixer.c: Profile output:hdmi-stereo supported.
    D: alsa-mixer.c: Looking at profile output:hdmi-stereo+input:analog-mono
    D: alsa-mixer.c: Checking for recording on Analog Mono (analog-mono)
    D: alsa-util.c: Trying hw:0 with SND_PCM_NO_AUTO_FORMAT ...
    D: alsa-util.c: Managed to open hw:0
    D: alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
    D: alsa-util.c: Trying hw:0 without SND_PCM_NO_AUTO_FORMAT ...
    D: alsa-util.c: Managed to open hw:0
    D: alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
    D: alsa-util.c: Trying plug:hw:0 with SND_PCM_NO_AUTO_FORMAT ...
    D: alsa-util.c: Managed to open plug:hw:0
    D: alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
    D: alsa-util.c: Trying plug:hw:0 without SND_PCM_NO_AUTO_FORMAT ...
    D: alsa-util.c: Managed to open plug:hw:0
    D: alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
    I: alsa-util.c: Failed to set hardware parameters on plug:hw:0: Invalid argument
    D: alsa-mixer.c: Looking at profile output:hdmi-stereo+input:analog-stereo
    D: alsa-mixer.c: Checking for recording on Analog Stereo (analog-stereo)
    D: alsa-util.c: Trying front:0 with SND_PCM_NO_AUTO_FORMAT ...
    D: alsa-util.c: Managed to open front:0
    D: alsa-util.c: Maximum hw buffer size is 341 ms
    D: alsa-util.c: Set buffer size first (to 4800 samples), period size second (to 1200 samples).
    D: alsa-mixer.c: Profile output:hdmi-stereo+input:analog-stereo supported.
    D: alsa-mixer.c: Looking at profile output:hdmi-stereo+input:iec958-stereo
    D: alsa-mixer.c: Checking for recording on Digital Stereo (IEC958) (iec958-stereo)
    D: alsa-util.c: Trying iec958:0 with SND_PCM_NO_AUTO_FORMAT ...
    I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC0D1c' failed (-2)
    I: alsa-util.c: Error opening PCM device iec958:0: No such file or directory
    D: alsa-mixer.c: Looking at profile output:hdmi-stereo+input:iec958-surround-40
    D: alsa-mixer.c: Checking for recording on Digital Surround 4.0 (IEC958) (iec958-surround-40)
    D: alsa-util.c: Trying iec958:0 with SND_PCM_NO_AUTO_FORMAT ...
    I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC0D1c' failed (-2)
    I: alsa-util.c: Error opening PCM device iec958:0: No such file or directory
    D: alsa-mixer.c: Looking at profile input:analog-mono
    D: alsa-mixer.c: Checking for recording on Analog Mono (analog-mono)
    D: alsa-util.c: Trying hw:0 with SND_PCM_NO_AUTO_FORMAT ...
    D: alsa-util.c: Managed to open hw:0
    D: alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
    D: alsa-util.c: Trying hw:0 without SND_PCM_NO_AUTO_FORMAT ...
    D: alsa-util.c: Managed to open hw:0
    D: alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
    D: alsa-util.c: Trying plug:hw:0 with SND_PCM_NO_AUTO_FORMAT ...
    D: alsa-util.c: Managed to open plug:hw:0
    D: alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
    D: alsa-util.c: Trying plug:hw:0 without SND_PCM_NO_AUTO_FORMAT ...
    D: alsa-util.c: Managed to open plug:hw:0
    D: alsa-util.c: snd_pcm_hw_params_set_channels(1) failed: Invalid argument
    I: alsa-util.c: Failed to set hardware parameters on plug:hw:0: Invalid argument
    D: alsa-mixer.c: Looking at profile input:analog-stereo
    D: alsa-mixer.c: Checking for recording on Analog Stereo (analog-stereo)
    D: alsa-util.c: Trying front:0 with SND_PCM_NO_AUTO_FORMAT ...
    D: alsa-util.c: Managed to open front:0
    D: alsa-util.c: Maximum hw buffer size is 341 ms
    D: alsa-util.c: Set buffer size first (to 4800 samples), period size second (to 1200 samples).
    D: alsa-mixer.c: Profile input:analog-stereo supported.
    D: alsa-mixer.c: Looking at profile input:iec958-stereo
    D: alsa-mixer.c: Checking for recording on Digital Stereo (IEC958) (iec958-stereo)
    D: alsa-util.c: Trying iec958:0 with SND_PCM_NO_AUTO_FORMAT ...
    I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC0D1c' failed (-2)
    I: alsa-util.c: Error opening PCM device iec958:0: No such file or directory
    D: alsa-mixer.c: Looking at profile input:iec958-surround-40
    D: alsa-mixer.c: Checking for recording on Digital Surround 4.0 (IEC958) (iec958-surround-40)
    D: alsa-util.c: Trying iec958:0 with SND_PCM_NO_AUTO_FORMAT ...
    I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC0D1c' failed (-2)
    I: alsa-util.c: Error opening PCM device iec958:0: No such file or directory
    I: card.c: Created 0 "alsa_card.pci-0000_00_09.0"
    D: reserve-wrap.c: Successfully create reservation lock monitor for device 'Audio0'
    D: alsa-util.c: Trying surround51:0 with SND_PCM_NO_AUTO_FORMAT ...
    D: alsa-util.c: Managed to open surround51:0
    D: alsa-util.c: Maximum hw buffer size is 113 ms
    D: alsa-util.c: Set buffer size first (to 96000 samples), period size second (to 96000 samples).
    I: alsa-sink.c: Successfully opened device surround51:0.
    I: alsa-sink.c: Selected mapping 'Analog Surround 5.1' (analog-surround-51).
    I: alsa-sink.c: Successfully enabled mmap() mode.
    I: alsa-sink.c: Successfully enabled timer-based scheduling mode.
    I: (alsa-lib)control.c: Invalid CTL surround51:0
    I: alsa-mixer.c: Unable to attach to mixer surround51:0: No such file or directory
    I: alsa-mixer.c: Successfully attached to mixer 'hw:0'
    D: alsa-mixer.c: Probing path 'analog-output'
    D: alsa-mixer.c: Probing path 'analog-output-speaker'
    D: alsa-mixer.c: Probing path 'analog-output-speaker'
    D: alsa-mixer.c: Probe of element 'Desktop Speaker' failed.
    D: alsa-mixer.c: Probing path 'analog-output-lfe-on-mono'
    D: alsa-mixer.c: Probe of element 'Master Mono' failed.
    D: alsa-sink.c: Probed mixer paths:
    D: alsa-mixer.c: Path Set 0xee7800, direction=1, probed=yes
    D: alsa-mixer.c: Path analog-output (Analog Output), direction=1, priority=99, probed=yes, supported=yes, has_mute=yes, has_volume=yes, has_dB=yes, min_volume=0, max_volume=31, min_dB=-144, max_dB=0
    D: alsa-mixer.c: Element Master, direction=1, switch=1, volume=1, enumeration=0, required=0, required_absent=0, mask=0x7ffffffffffff, n_channels=1, override_map=yes
    D: alsa-mixer.c: Element Headphone, direction=1, switch=1, volume=0, enumeration=0, required=0, required_absent=0, mask=0x0, n_channels=0, override_map=no
    D: alsa-mixer.c: Element Speaker, direction=1, switch=1, volume=0, enumeration=0, required=0, required_absent=0, mask=0x0, n_channels=0, override_map=no
    D: alsa-mixer.c: Element Front, direction=1, switch=1, volume=1, enumeration=0, required=0, required_absent=0, mask=0x6, n_channels=2, override_map=yes
    D: alsa-mixer.c: Element Surround, direction=1, switch=1, volume=1, enumeration=0, required=0, required_absent=0, mask=0x60, n_channels=2, override_map=yes
    D: alsa-mixer.c: Element Side, direction=1, switch=1, volume=1, enumeration=0, required=0, required_absent=0, mask=0xc00, n_channels=2, override_map=yes
    D: alsa-mixer.c: Element Center, direction=1, switch=1, volume=1, enumeration=0, required=0, required_absent=0, mask=0x4900000000018, n_channels=1, override_map=yes
    D: alsa-mixer.c: Element LFE, direction=1, switch=1, volume=1, enumeration=0, required=0, required_absent=0, mask=0x80, n_channels=1, override_map=yes
    D: alsa-mixer.c: Element PCM, direction=1, switch=0, volume=1, enumeration=0, required=0, required_absent=0, mask=0x3600000000f66, n_channels=2, override_map=yes
    D: alsa-mixer.c: Path analog-output-speaker (Analog Speakers), direction=1, priority=100, probed=yes, supported=yes, has_mute=yes, has_volume=yes, has_dB=yes, min_volume=0, max_volume=31, min_dB=-144, max_dB=0
    D: alsa-mixer.c: Element Master, direction=1, switch=1, volume=1, enumeration=0, required=0, required_absent=0, mask=0x7ffffffffffff, n_channels=1, override_map=yes
    D: alsa-mixer.c: Element Headphone, direction=1, switch=1, volume=0, enumeration=0, required=0, required_absent=0, mask=0x0, n_channels=0, override_map=no
    D: alsa-mixer.c: Element Speaker, direction=1, switch=1, volume=0, enumeration=0, required=4, required_absent=0, mask=0x0, n_channels=0, override_map=yes
    D: alsa-mixer.c: Element Front, direction=1, switch=1, volume=1, enumeration=0, required=0, required_absent=0, mask=0x6, n_channels=2, override_map=yes
    D: alsa-mixer.c: Element Surround, direction=1, switch=1, volume=1, enumeration=0, required=0, required_absent=0, mask=0x60, n_channels=2, override_map=yes
    D: alsa-mixer.c: Element Side, direction=1, switch=1, volume=1, enumeration=0, required=0, required_absent=0, mask=0xc00, n_channels=2, override_map=yes
    D: alsa-mixer.c: Element Center, direction=1, switch=1, volume=1, enumeration=0, required=0, required_absent=0, mask=0x4900000000018, n_channels=1, override_map=yes
    D: alsa-mixer.c: Element LFE, direction=1, switch=1, volume=1, enumeration=0, required=0, required_absent=0, mask=0x80, n_channels=1, override_map=yes
    D: alsa-mixer.c: Element PCM, direction=1, switch=0, volume=1, enumeration=0, required=0, required_absent=0, mask=0x3600000000f66, n_channels=2, override_map=yes
    D: alsa-mixer.c: Added 2 ports
    I: sink.c: Created sink 0 "alsa_output.pci-0000_00_09.0.analog-surround-51" with sample spec s16le 6ch 48000Hz and channel map front-left,front-right,rear-left,rear-right,front-center,lfe
    I: sink.c: alsa.resolution_bits = "16"
    I: sink.c: device.api = "alsa"
    I: sink.c: device.class = "sound"
    I: sink.c: alsa.class = "generic"
    I: sink.c: alsa.subclass = "generic-mix"
    I: sink.c: alsa.name = "ALC1200 Analog"
    I: sink.c: alsa.id = "ALC1200 Analog"
    I: sink.c: alsa.subdevice = "0"
    I: sink.c: alsa.subdevice_name = "subdevice #0"
    I: sink.c: alsa.device = "0"
    I: sink.c: alsa.card = "0"
    I: sink.c: alsa.card_name = "HDA NVidia"
    I: sink.c: alsa.long_card_name = "HDA NVidia at 0xf9e78000 irq 20"
    I: sink.c: alsa.driver_name = "snd_hda_intel"
    I: sink.c: device.bus_path = "pci-0000:00:09.0"
    I: sink.c: sysfs.path = "/devices/pci0000:00/0000:00:09.0/sound/card0"
    I: sink.c: device.bus = "pci"
    I: sink.c: device.vendor.id = "10de"
    I: sink.c: device.vendor.name = "nVidia Corporation"
    I: sink.c: device.product.id = "07fc"
    I: sink.c: device.product.name = "MCP73 High Definition Audio"
    I: sink.c: device.form_factor = "internal"
    I: sink.c: device.string = "surround51:0"
    I: sink.c: device.buffering.buffer_size = "65280"
    I: sink.c: device.buffering.fragment_size = "32640"
    I: sink.c: device.access_mode = "mmap+timer"
    I: sink.c: device.profile.name = "analog-surround-51"
    I: sink.c: device.profile.description = "Analog Surround 5.1"
    I: sink.c: device.description = "Internal Audio Analog Surround 5.1"
    I: sink.c: alsa.mixer_name = "Nvidia MCP73 HDMI"
    I: sink.c: alsa.components = "HDA:10ec0888,10250137,00100101 HDA:10de8001,10de0101,00100000"
    I: sink.c: module-udev-detect.discovered = "1"
    I: sink.c: device.icon_name = "audio-card-pci"
    D: core-subscribe.c: Dropped redundant event due to change event.
    I: source.c: Created source 0 "alsa_output.pci-0000_00_09.0.analog-surround-51.monitor" with sample spec s16le 6ch 48000Hz and channel map front-left,front-right,rear-left,rear-right,front-center,lfe
    I: source.c: device.description = "Monitor of Internal Audio Analog Surround 5.1"
    I: source.c: device.class = "monitor"
    I: source.c: alsa.card = "0"
    I: source.c: alsa.card_name = "HDA NVidia"
    I: source.c: alsa.long_card_name = "HDA NVidia at 0xf9e78000 irq 20"
    I: source.c: alsa.driver_name = "snd_hda_intel"
    I: source.c: device.bus_path = "pci-0000:00:09.0"
    I: source.c: sysfs.path = "/devices/pci0000:00/0000:00:09.0/sound/card0"
    I: source.c: device.bus = "pci"
    I: source.c: device.vendor.id = "10de"
    I: source.c: device.vendor.name = "nVidia Corporation"
    I: source.c: device.product.id = "07fc"
    I: source.c: device.product.name = "MCP73 High Definition Audio"
    I: source.c: device.form_factor = "internal"
    I: source.c: device.string = "0"
    I: source.c: module-udev-detect.discovered = "1"
    I: source.c: device.icon_name = "audio-card-pci"
    I: alsa-sink.c: Using 2.0 fragments of size 32640 bytes (56.67ms), buffer size is 65280 bytes (113.33ms)
    I: alsa-sink.c: Time scheduling watermark is 20.00ms
    D: alsa-sink.c: hwbuf_unused=0
    D: alsa-sink.c: setting avail_min=4480
    D: alsa-mixer.c: Activating path analog-output-speaker
    D: alsa-mixer.c: Path analog-output-speaker (Analog Speakers), direction=1, priority=100, probed=yes, supported=yes, has_mute=yes, has_volume=yes, has_dB=yes, min_volume=0, max_volume=31, min_dB=-144, max_dB=0
    D: alsa-mixer.c: Element Master, direction=1, switch=1, volume=1, enumeration=0, required=0, required_absent=0, mask=0x7ffffffffffff, n_channels=1, override_map=yes
    D: alsa-mixer.c: Element Headphone, direction=1, switch=1, volume=0, enumeration=0, required=0, required_absent=0, mask=0x0, n_channels=0, override_map=no
    D: alsa-mixer.c: Element Speaker, direction=1, switch=1, volume=0, enumeration=0, required=4, required_absent=0, mask=0x0, n_channels=0, override_map=yes
    D: alsa-mixer.c: Element Front, direction=1, switch=1, volume=1, enumeration=0, required=0, required_absent=0, mask=0x6, n_channels=2, override_map=yes
    D: alsa-mixer.c: Element Surround, direction=1, switch=1, volume=1, enumeration=0, required=0, required_absent=0, mask=0x60, n_channels=2, override_map=yes
    D: alsa-mixer.c: Element Side, direction=1, switch=1, volume=1, enumeration=0, required=0, required_absent=0, mask=0xc00, n_channels=2, override_map=yes
    D: alsa-mixer.c: Element Center, direction=1, switch=1, volume=1, enumeration=0, required=0, required_absent=0, mask=0x4900000000018, n_channels=1, override_map=yes
    D: alsa-mixer.c: Element LFE, direction=1, switch=1, volume=1, enumeration=0, required=0, required_absent=0, mask=0x80, n_channels=1, override_map=yes
    D: alsa-mixer.c: Element PCM, direction=1, switch=0, volume=1, enumeration=0, required=0, required_absent=0, mask=0x3600000000f66, n_channels=2, override_map=yes
    I: alsa-sink.c: Hardware volume ranges from -144.00 dB to 0.00 dB.
    I: alsa-sink.c: No particular base volume set, fixing to 0 dB
    I: alsa-sink.c: Using hardware volume control. Hardware dB scale supported.
    I: alsa-sink.c: Using hardware mute control.
    D: alsa-util.c: snd_pcm_dump():
    D: alsa-util.c: Soft volume PCM
    D: alsa-util.c: Control: PCM Playback Volume
    D: alsa-util.c: min_dB: -51
    D: alsa-util.c: max_dB: 0
    D: alsa-util.c: resolution: 256
    D: alsa-util.c: Its setup is:
    D: alsa-util.c: stream : PLAYBACK
    D: alsa-util.c: access : MMAP_INTERLEAVED
    D: alsa-util.c: format : S16_LE
    D: alsa-util.c: subformat : STD
    D: alsa-util.c: channels : 6
    D: alsa-util.c: rate : 48000
    D: alsa-util.c: exact rate : 48000 (48000/1)
    D: alsa-util.c: msbits : 16
    D: alsa-util.c: buffer_size : 5440
    D: alsa-util.c: period_size : 2720
    D: alsa-util.c: period_time : 56666
    D: alsa-util.c: tstamp_mode : ENABLE
    D: alsa-util.c: period_step : 1
    D: alsa-util.c: avail_min : 4480
    D: alsa-util.c: period_event : 0
    D: alsa-util.c: start_threshold : -1
    D: alsa-util.c: stop_threshold : 6124895493223874560
    D: alsa-util.c: silence_threshold: 0
    D: alsa-util.c: silence_size : 0
    D: alsa-util.c: boundary : 6124895493223874560
    D: alsa-util.c: Slave: Hardware PCM card 0 'HDA NVidia' device 0 subdevice 0
    D: alsa-util.c: Its setup is:
    D: alsa-util.c: stream : PLAYBACK
    D: alsa-util.c: access : MMAP_INTERLEAVED
    D: alsa-util.c: format : S16_LE
    D: alsa-util.c: subformat : STD
    D: alsa-util.c: channels : 6
    D: alsa-util.c: rate : 48000
    D: alsa-util.c: exact rate : 48000 (48000/1)
    D: alsa-util.c: msbits : 16
    D: alsa-util.c: buffer_size : 5440
    D: alsa-util.c: period_size : 2720
    D: alsa-util.c: period_time : 56666
    D: alsa-util.c: tstamp_mode : ENABLE
    D: alsa-util.c: period_step : 1
    D: alsa-util.c: avail_min : 4480
    D: alsa-util.c: period_event : 0
    D: alsa-util.c: start_threshold : -1
    D: alsa-util.c: stop_threshold : 6124895493223874560
    D: alsa-util.c: silence_threshold: 0
    D: alsa-util.c: silence_size : 0
    D: alsa-util.c: boundary : 6124895493223874560
    D: alsa-util.c: appl_ptr : 0
    D: alsa-util.c: hw_ptr : 0
    D: alsa-sink.c: Read hardware volume: 0: 20% 1: 20% 2: 20% 3: 20% 4: 20% 5: 20%
    D: alsa-sink.c: Thread starting up
    D: core-util.c: SCHED_RR|SCHED_RESET_ON_FORK worked.
    I: core-util.c: Successfully enabled SCHED_RR scheduling for thread, with priority 5.
    I: alsa-sink.c: Starting playback.
    D: alsa-sink.c: Cutting sleep time for the initial iterations by half.
    D: alsa-sink.c: Cutting sleep time for the initial iterations by half.
    D: alsa-sink.c: Cutting sleep time for the initial iterations by half.
    D: alsa-util.c: Trying front:0 with SND_PCM_NO_AUTO_FORMAT ...
    D: alsa-util.c: Managed to open front:0
    D: alsa-util.c: Maximum hw buffer size is 341 ms
    D: alsa-util.c: Set buffer size first (to 96000 samples), period size second (to 96000 samples).
    I: alsa-source.c: Successfully opened device front:0.
    I: alsa-source.c: Selected mapping 'Analog Stereo' (analog-stereo).
    I: alsa-source.c: Successfully enabled mmap() mode.
    I: alsa-source.c: Successfully enabled timer-based scheduling mode.
    I: (alsa-lib)control.c: Invalid CTL front:0
    I: alsa-mixer.c: Unable to attach to mixer front:0: No such file or directory
    I: alsa-mixer.c: Successfully attached to mixer 'hw:0'
    D: alsa-mixer.c: Probing path 'analog-input'
    D: alsa-mixer.c: Probing path 'analog-input-microphone'
    D: alsa-mixer.c: Probe of element 'Mic' failed.
    D: alsa-mixer.c: Probing path 'analog-input-linein'
    D: alsa-mixer.c: Probe of element 'Line' failed.
    D: alsa-mixer.c: Probing path 'analog-input'
    D: alsa-mixer.c: Probe of element 'Aux' failed.
    D: alsa-mixer.c: Probing path 'analog-input-video'
    D: alsa-mixer.c: Probe of element 'Video' failed.
    D: alsa-mixer.c: Probing path 'analog-input-video'
    D: alsa-mixer.c: Probe of element 'TV Tuner' failed.
    D: alsa-mixer.c: Probing path 'analog-input-radio'
    D: alsa-mixer.c: Probe of element 'FM' failed.
    D: alsa-mixer.c: Probing path 'analog-input'
    D: alsa-mixer.c: Probe of element 'Mic/Line' failed.
    D: alsa-source.c: Probed mixer paths:
    D: alsa-mixer.c: Path Set 0x7f4604004330, direction=2, probed=yes
    D: alsa-mixer.c: Path analog-input (Analog Input), direction=2, priority=100, probed=yes, supported=yes, has_mute=yes, has_volume=yes, has_dB=yes, min_volume=0, max_volume=31, min_dB=-16.5, max_dB=30
    D: alsa-mixer.c: Element Capture, direction=2, switch=1, volume=1, enumeration=0, required=2, required_absent=0, mask=0x403f600000000f66, n_channels=2, override_map=yes
    D: alsa-mixer.c: Element Input Source, direction=2, switch=0, volume=0, enumeration=1, required=0, required_absent=0, mask=0x0, n_channels=0, override_map=no
    D: alsa-mixer.c: Option Mic (input-microphone-1/Microphone 1) index=0, priority=20
    D: alsa-mixer.c: Option Front Mic (input-microphone-2/Microphone 2) index=1, priority=19
    D: alsa-mixer.c: Option Line (input-linein/Line-In) index=2, priority=18
    D: alsa-mixer.c: Setting input-microphone-1 (Microphone 1) priority=20
    D: alsa-mixer.c: Setting input-microphone-2 (Microphone 2) priority=19
    D: alsa-mixer.c: Setting input-linein (Line-In) priority=18
    D: alsa-mixer.c: Added 3 ports
    D: core-subscribe.c: Dropped redundant event due to change event.
    I: source.c: Created source 1 "alsa_input.pci-0000_00_09.0.analog-stereo" with sample spec s16le 2ch 48000Hz and channel map front-left,front-right
    I: source.c: alsa.resolution_bits = "16"
    I: source.c: device.api = "alsa"
    I: source.c: device.class = "sound"
    I: source.c: alsa.class = "generic"
    I: source.c: alsa.subclass = "generic-mix"
    I: source.c: alsa.name = "ALC1200 Analog"
    I: source.c: alsa.id = "ALC1200 Analog"
    I: source.c: alsa.subdevice = "0"
    I: source.c: alsa.subdevice_name = "subdevice #0"
    I: source.c: alsa.device = "0"
    I: source.c: alsa.card = "0"
    I: source.c: alsa.card_name = "HDA NVidia"
    I: source.c: alsa.long_card_name = "HDA NVidia at 0xf9e78000 irq 20"
    I: source.c: alsa.driver_name = "snd_hda_intel"
    I: source.c: device.bus_path = "pci-0000:00:09.0"
    I: source.c: sysfs.path = "/devices/pci0000:00/0000:00:09.0/sound/card0"
    I: source.c: device.bus = "pci"
    I: source.c: device.vendor.id = "10de"
    I: source.c: device.vendor.name = "nVidia Corporation"
    I: source.c: device.product.id = "07fc"
    I: source.c: device.product.name = "MCP73 High Definition Audio"
    I: source.c: device.form_factor = "internal"
    I: source.c: device.string = "front:0"
    I: source.c: device.buffering.buffer_size = "65536"
    I: source.c: device.buffering.fragment_size = "32768"
    I: source.c: device.access_mode = "mmap+timer"
    I: source.c: device.profile.name = "analog-stereo"
    I: source.c: device.profile.description = "Analog Stereo"
    I: source.c: device.description = "Internal Audio Analog Stereo"
    I: source.c: alsa.mixer_name = "Nvidia MCP73 HDMI"
    I: source.c: alsa.components = "HDA:10ec0888,10250137,00100101 HDA:10de8001,10de0101,00100000"
    I: source.c: module-udev-detect.discovered = "1"
    I: source.c: device.icon_name = "audio-card-pci"
    I: alsa-source.c: Using 2.0 fragments of size 32768 bytes (170.67ms), buffer size is 65536 bytes (341.33ms)
    I: alsa-source.c: Time scheduling watermark is 20.00ms
    D: alsa-source.c: hwbuf_unused=0
    D: alsa-source.c: setting avail_min=15424
    D: alsa-mixer.c: Activating path analog-input
    D: alsa-mixer.c: Path analog-input (Analog Input), direction=2, priority=100, probed=yes, supported=yes, has_mute=yes, has_volume=yes, has_dB=yes, min_volume=0, max_volume=31, min_dB=-16.5, max_dB=30
    D: alsa-mixer.c: Element Capture, direction=2, switch=1, volume=1, enumeration=0, required=2, required_absent=0, mask=0x403f600000000f66, n_channels=2, override_map=yes
    D: alsa-mixer.c: Element Input Source, direction=2, switch=0, volume=0, enumeration=1, required=0, required_absent=0, mask=0x0, n_channels=0, override_map=no
    D: alsa-mixer.c: Option Mic (input-microphone-1/Microphone 1) index=0, priority=20
    D: alsa-mixer.c: Option Front Mic (input-microphone-2/Microphone 2) index=1, priority=19
    D: alsa-mixer.c: Option Line (input-linein/Line-In) index=2, priority=18
    D: alsa-mixer.c: Setting input-microphone-1 (Microphone 1) priority=20
    D: alsa-mixer.c: Setting input-microphone-2 (Microphone 2) priority=19
    D: alsa-mixer.c: Setting input-linein (Line-In) priority=18
    I: alsa-source.c: Hardware volume ranges from -16.50 dB to 30.00 dB.
    I: alsa-source.c: Fixing base volume to -30.00 dB
    I: alsa-source.c: Using hardware volume control. Hardware dB scale supported.
    I: alsa-source.c: Using hardware mute control.
    D: alsa-util.c: snd_pcm_dump():
    D: alsa-util.c: Soft volume PCM
    D: alsa-util.c: Control: PCM Playback Volume
    D: alsa-util.c: min_dB: -51
    D: alsa-util.c: max_dB: 0
    D: alsa-util.c: resolution: 256
    D: alsa-util.c: Its setup is:
    D: alsa-util.c: stream : CAPTURE
    D: alsa-util.c: access : MMAP_INTERLEAVED
    D: alsa-util.c: format : S16_LE
    D: alsa-util.c: subformat : STD
    D: alsa-util.c: channels : 2
    D: alsa-util.c: rate : 48000
    D: alsa-util.c: exact rate : 48000 (48000/1)
    D: alsa-util.c: msbits : 16
    D: alsa-util.c: buffer_size : 16384
    D: alsa-util.c: period_size : 8192
    D: alsa-util.c: period_time : 170666
    D: alsa-util.c: tstamp_mode : ENABLE
    D: alsa-util.c: period_step : 1
    D: alsa-util.c: avail_min : 15424
    D: alsa-util.c: period_event : 0
    D: alsa-util.c: start_threshold : -1
    D: alsa-util.c: stop_threshold : 4611686018427387904
    D: alsa-util.c: silence_threshold: 0
    D: alsa-util.c: silence_size : 0
    D: alsa-util.c: boundary : 4611686018427387904
    D: alsa-util.c: Slave: Hardware PCM card 0 'HDA NVidia' device 0 subdevice 0
    D: alsa-util.c: Its setup is:
    D: alsa-util.c: stream : CAPTURE
    D: alsa-util.c: access : MMAP_INTERLEAVED
    D: alsa-util.c: format : S16_LE
    D: alsa-util.c: subformat : STD
    D: alsa-util.c: channels : 2
    D: alsa-util.c: rate : 48000
    D: alsa-util.c: exact rate : 48000 (48000/1)
    D: alsa-util.c: msbits : 16
    D: alsa-util.c: buffer_size : 16384
    D: alsa-util.c: period_size : 8192
    D: alsa-util.c: period_time : 170666
    D: alsa-util.c: tstamp_mode : ENABLE
    D: alsa-util.c: period_step : 1
    D: alsa-util.c: avail_min : 15424
    D: alsa-util.c: period_event : 0
    D: alsa-util.c: start_threshold : -1
    D: alsa-util.c: stop_threshold : 4611686018427387904
    D: alsa-util.c: silence_threshold: 0
    D: alsa-util.c: silence_size : 0
    D: alsa-util.c: boundary : 4611686018427387904
    D: alsa-util.c: appl_ptr : 0
    D: alsa-util.c: hw_ptr : 0
    D: alsa-source.c: Read hardware volume: 0: 27% 1: 27%
    D: alsa-source.c: Thread starting up
    D: core-util.c: SCHED_RR|SCHED_RESET_ON_FORK worked.
    I: core-util.c: Successfully enabled SCHED_RR scheduling for thread, with priority 5.
    I: alsa-source.c: Starting capture.
    I: module.c: Loaded "module-alsa-card" (index: #4; argument: "device_id="0" name="pci-0000_00_09.0" card_name="alsa_card.pci-0000_00_09.0" tsched=yes ignore_dB=no card_properties="module-udev-detect.discovered=1"").
    I: module-udev-detect.c: Card /devices/pci0000:00/0000:00:09.0/sound/card0 (alsa_card.pci-0000_00_09.0) module loaded.
    I: module-udev-detect.c: Found 1 cards.
    I: module.c: Loaded "module-udev-detect" (index: #5; argument: "").
    D: cli-command.c: Checking for existance of '/usr/lib/pulse-0.9.22/modules/module-bluetooth-discover.so': success
    D: dbus-util.c: Successfully connected to D-Bus system bus 388ec2ad109f18dc6cb6313a00000021 as :1.108
    D: bluetooth-util.c: dbus: interface=org.freedesktop.DBus, path=/org/freedesktop/DBus, member=NameAcquired
    D: bluetooth-util.c: Bluetooth daemon is apparently not available.
    I: module.c: Loaded "module-bluetooth-discover" (index: #6; argument: "").
    D: cli-command.c: Checking for existance of '/usr/lib/pulse-0.9.22/modules/module-esound-protocol-unix.so': success
    E: socket-server.c: bind(): Address already in use
    E: module.c: Failed to load module "module-esound-protocol-unix" (argument: ""): initialization failed.
    E: main.c: Module load failed.
    E: main.c: Failed to initialize daemon.
    I: module.c: Unloading "module-device-restore" (index: #0).
    I: module.c: Unloaded "module-device-restore" (index: #0).
    D: core-subscribe.c: Dropped redundant event due to remove event.
    I: module.c: Unloading "module-stream-restore" (index: #1).
    I: module.c: Unloaded "module-stream-restore" (index: #1).
    D: core-subscribe.c: Dropped redundant event due to remove event.
    I: module.c: Unloading "module-card-restore" (index: #2).
    I: module.c: Unloaded "module-card-restore" (index: #2).
    D: core-subscribe.c: Dropped redundant event due to remove event.
    I: module.c: Unloading "module-augment-properties" (index: #3).
    I: module.c: Unloaded "module-augment-properties" (index: #3).
    D: core-subscribe.c: Dropped redundant event due to remove event.
    I: module.c: Unloading "module-alsa-card" (index: #4).
    D: alsa-sink.c: Cutting sleep time for the initial iterations by half.
    D: core-subscribe.c: Dropped redundant event due to remove event.
    D: core-subscribe.c: Dropped redundant event due to remove event.
    D: core-subscribe.c: Dropped redundant event due to remove event.
    D: core-subscribe.c: Dropped redundant event due to remove event.
    D: alsa-sink.c: Thread shutting down
    I: sink.c: Freeing sink 0 "alsa_output.pci-0000_00_09.0.analog-surround-51"
    I: source.c: Freeing source 0 "alsa_output.pci-0000_00_09.0.analog-surround-51.monitor"
    D: core-subscribe.c: Dropped redundant event due to remove event.
    D: core-subscribe.c: Dropped redundant event due to remove event.
    D: alsa-source.c: Thread shutting down
    I: source.c: Freeing source 1 "alsa_input.pci-0000_00_09.0.analog-stereo"
    I: card.c: Freed 0 "alsa_card.pci-0000_00_09.0"
    D: core-subscribe.c: Dropped redundant event due to remove event.
    I: module.c: Unloaded "module-alsa-card" (index: #4).
    D: core-subscribe.c: Dropped redundant event due to remove event.
    I: module.c: Unloading "module-udev-detect" (index: #5).
    I: module.c: Unloaded "module-udev-detect" (index: #5).
    D: core-subscribe.c: Dropped redundant event due to remove event.
    I: module.c: Unloading "module-bluetooth-discover" (index: #6).
    I: module.c: Unloaded "module-bluetooth-discover" (index: #6).
    D: core-subscribe.c: Dropped redundant event due to remove event.
    I: main.c: Daemon terminated.

  • Is it possible to make flash detect the location of the mouse and....

    Hello
    I'm looking for a script in AS2 that can detect the location of the mouse and when you leave the zone it trigger an action. This script need to detect the location of the mouse without interference of any other object inside the zone ( that include button ) and without "blocking" those object because of the invisible zone that could be on top of it.
    I know the trick about the invisible button where you detect the mouseover with it, when you place it under all your stuff ( so that your mouse can navigate in peace ).
    The main probleme will be that tee flash will be smaller than the viewscreen so it need to detect imediatly and at any speed the mouse leaving it's location. So the button trick is a no-go because too slow. Also because the website will need to auto-adapt to your viewscreen.
    I need to be able to set the X and Y position of the mouse and i don't know.. does it require to put in the script the boundary location of the zone itself ? left top bottom right side ?
    Right now i have a flash of 2000 px large and it is centering itself perfectly, But however, i get a horizontal scrolling bar that i want to get rid off. I am exploring all possible solution.
    Dreamweaver forum link : http://forums.adobe.com/thread/613249?tstart=0 about my probleme with more detail. I am considering resizing the flash ( and having to move everything inside it for that... ) down from 2000 to 950px large, So when the user leave the zone inside the flash in a quick move the script need to detect before it leave the flash zone. I know that AS3 so it, but i have no time nor ressource to translate to AS3 the whole flash.
    Thanks !

    Probleme solved without having to change anything in the flash.
    The solution was to add a small part in the CSS in HTML
    html {
    overflow-x: hidden;
    overflow-y: auto;
    Solve probleme. All browser. VERY usefull to know !

  • Programatically detect the card

    hi
    how to programatically detect the card is a digitai I/O card or not?
    I have a DAQ card in my PCI slot and i would like my applilcation
    to detect the whether its  DAQ or Digital I /O card or not.
    If its other like relay or switch card my application does not need to interact
    with the cards.
    how can i achieve this.
    regards
    rags

    Hi Rags,
    You can obtain the names of all devices in your computer by
    using  the DAQmxGetSysDevNames()
    function, and then use the DAQmxGetDevProductCategory() function to see if the
    board is a digital IO board. (see picture below, taken from DAQmx C Reference
    Help). This reference guide can be found under Start >> Programs >> National Instruments >> NI-DAQ.
    This forum and this forum may be helpful if you are running
    into errors.
    Message Edited by David L. on 09-06-2007 01:07 AM
    David L.
    Systems Engineering
    National Instruments
    Attachments:
    Device Product Category.JPG ‏82 KB

  • I recently updated the itunes software and now my iphone wont detect the sim card! what do i do?

    I recently got my iphone unlocked because i wanted to change my carrier. today when i connected my iphone to the itunes it started updating the software! all my previous data was erased and now it wont detect the sim card! what do i do?

    Updating iTunes has nothing to do with an iDevice going into recovery mode.
    If the device is in recovery mode, restore it via iTunes on a computer.

  • APPLE/DEVS Read this! Windows 7 CAN'T detect the iPhone 5s but iTunes CAN detect it! WEIRD, huh?!..

    just a summary...
    i have a iphone 3G which i have been using for a long time and now i got an iphone 5s.. troubleshooting this kind of stuff is not new to me from computers to smartphones.. the internet has a vast majority of information and all you need to do is type in the right "KEYWORD".. i'm that kind of guy that looks for the answer before i try to look on it on my own.. i'm a DIY kind of guy as long as there is an instruction on how to do it..
    now, back to the topic..
    so i was trying to copy some of my pictures on my iphone 5s to my PC for backup purposes and to see the quality of the images but the portable device doesn't show up unlike my iphone 3G which is f***ing WEIRD.. been tinkering with this over the past 5 days since i have nothing to do and testing the new features of this phone but to no avail.. searched all over the internet but still none..
    so last night, i was really determined since i can't sleep and also connected my iphone 3G to my PC while the iphone 5s is connected.. so here is what shows up on my devices and printers and device manager..
    i can totally see the pics on my iphone 3G but not on my iphone 5s.. totally amazing.. good job apple!
    the picture under devices shows my iphone 3G and the other 2 on unspecified is my iphone 5s.. the iPhone under there is being used as my source of internet since this is tethered so i can have access and post this in here so that APPLE will know how f***ed up their SOFTWARE is is..
    so i downloaded itunes a couple of times, and i can't remember how many already, i think 5 times or more and then uninstalled all apple softwares (itunes, apple application support, apple mobile device support and etc as long as there is apple in it) and then reinstalled itunes but still none..
    so i went on device manager removed my iphone 3G and the only one that would show there is the Apple Mobile Device USB driver under USB controllers..
    and then i uninstalled the driver, looked for the driver myself by just it doesn't show up in here where you are directed to look for the driver and oh im using 64 bit just so everyone knows and i already found out that my system is using the usbaapl64.sys file in windows>system32>drivers..
    so last night i installed, reinstalled itunes and then suddenly my drive D: was gone and i received an error or a "!" on my drive and my drive is not being detected.
    Error: windows cannot start this hardware device because its configuration information (in the registry) is incomplete or damage. (code 19).
    i unstalled the driver in device manager and then scan hardware changes, updated the driver automatically and manually and it is saying that i have the latest hardware but i can't use my DVD drive with the error on it..
    so today i searched for that e-fing error and found this http://pcsupport.about.com/od/findbyerrormessage/a/code-19-error.htm
    "4. Uninstall Apple iTunes. While that may sound a little drastic, iTunes is the cause of enough Code 19 errors to make it into this troubleshooting.
    If removing iTunes works, you might try installing it again from scratch, which doesn't always reintroduce the problem. See How to Properly Reinstall a Software Program for general advice."
    so i then uninstalled my itunes, uninstalled my driver and then updated it and "walla!". i can see my DVD drive again. i am using iTunes64Setup v12.0.1.26 just so everyone knows and this setup can detect both my iphones and my iphone 5s is using the latest version which is iOS 8.1.2..
    after reinstallation of itunes my DVD drive can be seen and just  noticed how APPLE SOFTWARES are so ****** up.. CAUSING A LOT OF TROUBLE AND DAMAGES..
    so going back to the topic..
    i was able to find a way (AFTER HOW MANY HOURS of TROUBLESHOOTING) on how my iphone 5s was able to detect the portable device or should i say the images on my iphone 5s where the autoplay pops up and everything..
    so i went on device manager, uninstalled apple mobile device USB driver, disconnected my iphone 5s, UNLOCKED my iphone 5s, connected it to my PC, clicked on TRUST this PC, on my PC the sound for a USB being connected sounded, and at the bottom right, automatically installed the drivers and then the autoplay popped up with the matching PORTABLE DEVICES on COMPUTER where i can browse the internal storage and the pictures..
    so now i opened iTunes and BOOOM!
    iTunes doesn't detect my iphone 5s but i can browse on the images on my phone..
    so again i went to device manager, uninstalled the driver for apple iphone under portable devices, scanned for hardware changes, updated the driver manually by selecting drive C: so it would automatically find the correct drive..
    so now, my iphone can be detected by itunes but not on my COMPUTER.. see how ****** UP this is?!.. JEEEEEEEEEZ!!
    Now i finally found the SOLUTION on how to do this and vice versa.. UNTIL APPLE decides to FIX their SOFTWARE/DRIVER issues..
    if you want to scan or browse the images on your iphone 5s on your computer all you need to do is do this:
    [for those who don't know how to reach this part, here is a GUIDE on how to open this is: click on the device > click on update driver software > browse my computer for driver software > let me pick from a list of device drivers on my computer]
    and then you will see the screen below
    click on MTP USB Device and then click on Next, after it finishes installing the drivers, your PC will automatically detect a new portable device but in order for you to access the images you need to go back on your phone, unlock it if it lock automatically and then click on "TRUST" and then you can now see the images..
    BUT the problem here is that your iPhone can't be detected on iTunes...
    now, if you want to go back to where your phone can be detected on itunes, just follow these steps:
    click on apple mobile device USB driver, click on Next and then wait for your computer to finish the installation and then you will hear the beeping sound. check your phone, unlock it, then click on "TRUST", and then go to iTunes and you will now see your iPhone there but not on your PC where you can browse for the images..
    SEE HOW THIS DRIVERS are so ****** up.. i wish i hadn't started using this ****** UP OS with all the BUGS and GLITCHES.. JEEEZ! and to think, these DEVICES are not CHEAP compared to Android devices on the market.. it's just because of how these people go with the trend that they purchase these kind of stuff and the only thing they use it for is calling or texting.. i, for once use this not for calling or texting but also for the apps that it has like the games, ebooks and etc when im bored..
    i HOPE the Apple DEVS read this and find the solution on the drivers which is so ****** UP and so LAME!!
    PS: i hope a lot of people who are having the same issue as what i had find this and help them with their concern even though this is not a permanent solution.. it is just a work around for folks that are looking for answers and solution.
    Have a Great Day Folks and it is the start of a New Year and want to contribute something even though i don't usually posts my work around.

    Hi LSGZ,
    If you are having issues updating or restoring your iPhone, you may find the following article helpful:
    iOS: Unable to update or restore
    http://support.apple.com/kb/HT1808
    Regards,
    - Brenden

  • Is there a way to detect the end of a video?

    Is there a way to detect the end of a video.. .mp4 or youtube? I want to be able to detect the end of a video and then have it do something...ie play on timeline or go to and play symbol.

    For youtube the code would be something like this:
    view-source:calkaweb.herobo.com/video.html
    for HTML5 videos for youtube replace &version=3 with &html5=1 in the youtube URL
    I have no idea how to impletent the youtube code into Edge tho other than an iframe but that wouldn't work I've tried :
    http://forums.adobe.com/thread/1285212
    You would need to place all of the youtube codes into edge in order for it to work but I duno how to do that and no1 answered the question in the thread I made about it.
    as for MP4/HTML5 video you can use
    var video = document.getElementsByTagName('video')[0];
        video.onended = function(e) {
          /*Do Something*/

  • Startup Disk menu can no longer detect the hard drive

    I am trying to boot my dvd from the startup disk menu (the screen when you press alt and brings up Mac or Windows) as Paragon CamptuneX has adjusted my directory files when I expanded the partition size and it is required to boot from the windows DVD to reorder the directory. But for some reason, the startup disk menu cannot find the dvd drive? I can hear it spinning and there is no problem detecting the DVD once I boot into Mac OSX.......
    Any ideas what I should do? I'm trying to avoid cleaning out Bootcamp, and reinstalling it all over again....

    Okay, second question: How does this forum software work? According to the thread list, someone named MacWizard has replied to this thread, but I can't see it.
    MacWizard, if you could email your reply to spearbrave at gmail point c0m so I can read it there, I'd appreciate it.
    15" MacBook Pro C2D Mac OS X (10.4.8)

  • Adobe pop-up message when trying to install a program: "Failed to initialize. File not found. Please download Adobe Support Advisor to detect the problem."

    I have a 64-bit Windows 7 Home Premium PC. I recently had to reinstall my PC. I'm trying to install my Adobe Products like Flash Professional CS5 and Photoshop CS5, but it keeps coming up with the message "Failed to initialize. File not found. Please download Adobe Support Advisor to detect the problem." I keep looking around at different sites, but they seem so difficult and so much information which leaves me so confused. I have no idea how or why this has happened, and due to my autism it leaves me very panicky.
    I've tried the Adobe Creative Cloud Cleaner Tool. Here are the results.
    Gen_WWCombined-en_US-20121017_1230
    [Sat Jun 14 18:50:42 2014] Please enter (y) for Yes or (n) for No. ... >>
    [Sat Jun 14 18:50:44 2014] Choose from one of the following options to clean up :
    [Sat Jun 14 18:50:44 2014] 1.  All
    [Sat Jun 14 18:50:44 2014] 2.  Adobe Flash Player 10.2
    [Sat Jun 14 18:50:44 2014] 3.  Creative Cloud & CS6 Products
    [Sat Jun 14 18:50:44 2014] 4.  CS6 only
    [Sat Jun 14 18:50:44 2014] 5.  CS5-CS5.5-CS6
    [Sat Jun 14 18:50:44 2014] 6.  CS5-CS5.5
    [Sat Jun 14 18:50:44 2014] 7.  CS3, CS4
    [Sat Jun 14 18:50:44 2014] 8.  Adobe Id credentials
    [Sat Jun 14 18:50:44 2014] 9.  Quit
    [Sat Jun 14 18:50:44 2014] Choice :>
    [Sat Jun 14 18:50:46 2014] User selected: All
    [Sat Jun 14 18:50:46 2014] DB does not exist at: C:\Program Files (x86)\Common Files\Adobe\caps\pdb.db
    [Sat Jun 14 18:50:46 2014] DB does not exist at: C:\Program Files (x86)\Common Files\Adobe\caps\Media_db.db
    [Sat Jun 14 18:50:46 2014] DB does not exist at: C:\Program Files (x86)\Common Files\Adobe\caps\caps.db
    [Sat Jun 14 18:50:46 2014] List of products installed on this machine
    [Sat Jun 14 18:50:46 2014] Listing products for cleanup:
    [Sat Jun 14 18:50:46 2014] Please enter the option number of the product you wish to remove; enter (q) to quit ... >>
    [Sat Jun 14 18:50:48 2014] Are you sure you want to clean all the listed products and associated files?
    [Sat Jun 14 18:50:48 2014] Type (y) to confirm and remove or (n) to quit ... >>
    [Sat Jun 14 18:50:50 2014] Please wait for Adobe Creative Cloud Cleaner Tool to finish........
    [Sat Jun 14 18:50:50 2014] :: Cleaning-up left over inventories ::
    [Sat Jun 14 18:50:50 2014] Atleast one Non-RIBS Inventory : False, Atleast one AAMRef: False
    [Sat Jun 14 18:50:50 2014] ::Start:: Removing AUM contents
    [Sat Jun 14 18:50:50 2014] Deleting registry root:HKLM key:Software\Microsoft\Windows\CurrentVersion\Run value:AdobeAAMUpdater-1.0
    [Sat Jun 14 18:50:50 2014] Exception during deleting key : (5, 'RegOpenKeyEx', 'Access is denied.')
    [Sat Jun 14 18:50:50 2014] Deleting registry root:HKLM key:Software\Microsoft\Windows\CurrentVersion\Run value:ADOBE_UPDATER_STARTUP_UTILITY
    [Sat Jun 14 18:50:50 2014] Exception during deleting key : (5, 'RegOpenKeyEx', 'Access is denied.')
    [Sat Jun 14 18:50:50 2014] Deleting scheduled task : AdobeAAMUpdater-1.0-Stefan-PC-Stefan
    [Sat Jun 14 18:50:50 2014] Executing command: schtasks /delete /TN "AdobeAAMUpdater-1.0-Stefan-PC-Stefan" /F
    [Sat Jun 14 18:50:50 2014] ERROR: The system cannot find the file specified.
    [Sat Jun 14 18:50:50 2014] Deleting scheduled task : AdobeUpdater Task-Stefan-PC-Stefan
    [Sat Jun 14 18:50:50 2014] Executing command: schtasks /delete /TN "AdobeUpdater Task-Stefan-PC-Stefan" /F
    [Sat Jun 14 18:50:50 2014] ERROR: The system cannot find the file specified.
    [Sat Jun 14 18:50:50 2014] ::Finish:: Removing AUM contents
    [Sat Jun 14 18:50:50 2014] ::Start:: Removing OOBE
    [Sat Jun 14 18:50:50 2014] Executing command "taskkill /F /FI "IMAGENAME eq AAM Updates Notifier.exe""
    [Sat Jun 14 18:50:50 2014] INFO: No tasks running with the specified criteria.
    [Sat Jun 14 18:50:50 2014] ::Finish:: Removing OOBE
    [Sat Jun 14 18:50:50 2014] Removing content of Product : CS5Installer, Version : CS5
    [Sat Jun 14 18:50:50 2014] File does not exist: C:\Program Files (x86)\Common Files\Adobe\caps\pdb.db
    [Sat Jun 14 18:50:50 2014] File does not exist: C:\Program Files (x86)\Common Files\Adobe\caps\Media_db.db
    [Sat Jun 14 18:50:50 2014] LOG FILE SAVED TO: C:\Users\Stefan\AppData\Local\Temp\Adobe Creative Cloud Cleaner Tool.log
    [Sat Jun 14 18:50:50 2014] Adobe Creative Cloud Cleaner Tool completed successfully
    [Sat Jun 14 18:50:50 2014]
    [Sat Jun 14 18:50:50 2014] *-*-*-*-*-*- ::START:: - SUMMARY OF Warnings -*-*-*-*-*-*
    [Sat Jun 14 18:50:46 2014] DB does not exist at: C:\Program Files (x86)\Common Files\Adobe\caps\pdb.db
    [Sat Jun 14 18:50:46 2014] DB does not exist at: C:\Program Files (x86)\Common Files\Adobe\caps\Media_db.db
    [Sat Jun 14 18:50:46 2014] DB does not exist at: C:\Program Files (x86)\Common Files\Adobe\caps\caps.db
    [Sat Jun 14 18:50:50 2014] *-*-*-*-*-*- :: END :: - SUMMARY OF Warnings -*-*-*-*-*-*
    [Sat Jun 14 18:50:50 2014] ---------------------------------------------------------
    [Sat Jun 14 18:50:50 2014] *=*=*=*=*=*=*=*=* :: End Session :: *=*=*=*=*=*=*=*=*=*=*

    06/12/14 18:38:09:881 | [ERROR] |  | ASU | LWANative | P7Native |  |  | 19104 | OOBElib returned error: 34
    06/12/14 18:38:10:271 | [FATAL] |  | ASU | DWANative | DWANative |  |  | 19104 | Error in getting Payload 8
    06/12/14 18:38:11:878 | [ERROR] |  | ASU | DWANative | DWANative |  |  | 19104 | Error in dwa_getInstalledPathOfPayload, pdbSession is NULL.
    06/12/14 18:38:13:519 | [ERROR] |  | ASU | DWANative | DWANative |  |  | 19104 | Error in dwa_getInstalledPathOfPayload, pdbSession is NULL.
    06/12/14 18:44:30:229 | [ERROR] |  | ASU | OPM | CryptEngine |  |  | 860 | Failed in key3List generation
    06/12/14 18:44:31:074 | [ERROR] |  | ASU | PIM | PIM |  |  | 3576 | CreateProcess failed (267).
    06/12/14 18:46:40:335 | [ERROR] |  | ASU | PIM | PIM |  |  | 3576 | Process CreativeCloud(URIHandler).exe could not be killed
    06/12/14 18:46:40:335 | [ERROR] |  | ASU | PIM | PIM |  |  | 3576 | Process Creative Cloud Helper.exe could not be killed
    06/12/14 18:46:40:335 | [ERROR] |  | ASU | PIM | PIM |  |  | 3576 | Process Creative Cloud Uninstaller.exe could not be killed
    06/12/14 18:48:07:424 | [ERROR] |  | ASU | PIM | PIM |  |  | 3576 | Setting values for registry Key SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\Adobe Creative Cloud
    06/12/14 18:48:13:709 | [ERROR] |  | ASU | OPM | CryptEngine |  |  | 7652 | Failed in key3List generation
    06/12/14 18:48:16:239 | [ERROR] |  | ASU | OPM | CryptEngine |  |  | 7652 | Failed in key3List generation
    06/12/14 18:48:19:174 | [ERROR] |  | ASU | OPM | CryptEngine |  |  | 7652 | Failed in key3List generation
    06/12/14 18:48:21:342 | [ERROR] |  | ASU | OPM | CryptEngine |  |  | 7652 | Failed in key3List generation
    06/12/14 18:49:03:907 | [ERROR] |  | ASU | OPM | CryptEngine |  |  | 14092 | Failed in key3List generation
    06/12/14 18:49:08:386 | [ERROR] |  | ASU | OPM | CryptEngine |  |  | 14136 | Failed in key3List generation
    06/12/14 18:49:11:475 | [ERROR] |  | ASU | OPM | CryptEngine |  |  | 14136 | Failed in key3List generation
    06/12/14 18:49:13:361 | [ERROR] |  | ASU | OPM | CryptEngine |  |  | 14136 | Failed in key3List generation
    06/12/14 18:50:46:267 | [ERROR] |  | ASU | OPM | CryptEngine |  |  | 15932 | Failed in key3List generation
    06/12/14 18:50:49:357 | [ERROR] |  | ASU | OPM | CryptEngine |  |  | 15576 | Failed in key3List generation
    06/12/14 18:50:55:101 | [ERROR] |  | ASU | OPM | CryptEngine |  |  | 7024 | Failed in key3List generation
    06/12/14 18:52:48:711 | [ERROR] |  | ASU | OPM | CryptEngine |  |  | 18100 | Failed in key3List generation
    06/12/14 18:52:52:182 | [ERROR] |  | ASU | LWANative | OPM |  |  | 18100 | received empty url from dispatchlib
    06/12/14 18:52:55:816 | [ERROR] |  | ASU | OPM | CryptEngine |  |  | 18100 | Failed in key3List generation
    06/12/14 18:52:56:518 | [ERROR] |  | ASU | LWANative | P7Native |  |  | 18100 | OOBElib returned error: 42
    06/12/14 18:53:23:278 | [ERROR] |  | ASU | OPM | CryptEngine |  |  | 18100 | Failed in key3List generation
    6/13/2014 21:51:48 [ERROR] Setup - Error finding locale language dictionary file. Defaulting to english.
    6/13/2014 21:51:48 [ERROR] Setup - Error finding english dictionary file.
    6/13/2014 21:51:48 [ERROR] Setup - Unable to initialize ZString library
    6/13/2014 21:51:48 [FATAL] Setup - Setup.xml does not exist.
    6/13/2014 21:51:48 [FATAL] Setup - Unable to initialize. File missing.
    06/13/14 21:58:34:931 | [ERROR] |  | ASU | PIM | PIM |  |  | 21844 | CreateProcess failed (267).
    06/13/14 21:59:49:357 | [ERROR] |  | ASU | PIM | PIM |  |  | 21844 | Process CreativeCloud(URIHandler).exe could not be killed
    06/13/14 21:59:49:360 | [ERROR] |  | ASU | PIM | PIM |  |  | 21844 | Process Creative Cloud Helper.exe could not be killed
    06/13/14 21:59:49:363 | [ERROR] |  | ASU | PIM | PIM |  |  | 21844 | Process Creative Cloud Uninstaller.exe could not be killed
    06/13/14 22:01:13:116 | [ERROR] |  | ASU | PIM | PIM |  |  | 21844 | Setting values for registry Key SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\Adobe Creative Cloud
    06/13/14 22:01:13:121 | [ERROR] |  | ASU | PIM | PIM |  |  | 21844 | AAM ref file already exists at  2 C:\Program Files (x86)\Common Files\Adobe\AdobeApplicationManager\AAMRefs/ACC.aamref/RefCount.txt
    06/13/14 22:01:24:817 | [ERROR] |  | ASU | OPM | CryptEngine |  |  | 10872 | Failed in key3List generation
    06/13/14 22:01:29:716 | [ERROR] |  | ASU | OPM | CryptEngine |  |  | 10872 | Failed in key3List generation
    06/13/14 22:01:33:893 | [ERROR] |  | ASU | OPM | CryptEngine |  |  | 10872 | Failed in key3List generation
    06/13/14 22:01:35:676 | [ERROR] |  | ASU | OPM | CryptEngine |  |  | 10872 | Failed in key3List generation
    06/13/14 22:01:39:720 | [ERROR] |  | ASU | OPM | CryptEngine |  |  | 6244 | Failed in key3List generation
    06/13/14 22:01:41:220 | [ERROR] |  | ASU | OPM | CryptEngine |  |  | 6244 | Failed in key3List generation
    06/13/14 22:01:42:860 | [ERROR] |  | ASU | OPM | CryptEngine |  |  | 6244 | Failed in key3List generation
    06/13/14 22:02:56:630 | [ERROR] |  | ASU | OPM | CryptEngine |  |  | 20716 | Failed in key3List generation
    06/13/14 22:03:03:420 | [ERROR] |  | ASU | OPM | CryptEngine |  |  | 14200 | Failed in key3List generation
    06/13/14 22:04:23:916 | [ERROR] |  | ASU | OPM | P7Native |  |  | 14200 | ACCC : Cannot find LEIDs/LEID tags in the request data
    06/14/14 08:50:35:502 | [ERROR] |  | ASU | OPM | CryptEngine |  |  | 2856 | Failed in key3List generation
    06/14/14 08:50:46:796 | [ERROR] |  | ASU | OPM | CryptEngine |  |  | 2856 | Failed in key3List generation
    06/14/14 08:50:56:343 | [ERROR] |  | ASU | OPM | CryptEngine |  |  | 2856 | Failed in key3List generation
    06/14/14 08:51:01:148 | [ERROR] |  | ASU | OPM | CryptEngine |  |  | 2856 | Failed in key3List generation
    06/14/14 08:51:05:189 | [ERROR] |  | ASU | OPM | CryptEngine |  |  | 4816 | Failed in key3List generation
    06/14/14 08:51:08:012 | [ERROR] |  | ASU | OPM | CryptEngine |  |  | 4816 | Failed in key3List generation
    06/14/14 08:51:10:976 | [ERROR] |  | ASU | OPM | CryptEngine |  |  | 4816 | Failed in key3List generation
    06/14/14 08:53:05:074 | [ERROR] |  | ASU | OPM | CryptEngine |  |  | 5136 | Failed in key3List generation
    06/14/14 08:53:15:688 | [ERROR] |  | ASU | OPM | CryptEngine |  |  | 3444 | Failed in key3List generation
    06/14/14 08:54:36:596 | [ERROR] |  | ASU | OPM | P7Native |  |  | 3444 | ACCC : Cannot find LEIDs/LEID tags in the request data
    6/14/2014 11:21:45 [ERROR] Setup - Error finding locale language dictionary file. Defaulting to english.
    6/14/2014 11:21:45 [ERROR] Setup - Error finding english dictionary file.
    6/14/2014 11:21:45 [ERROR] Setup - Unable to initialize ZString library
    6/14/2014 11:21:45 [FATAL] Setup - Setup.xml does not exist.
    6/14/2014 11:21:45 [FATAL] Setup - Unable to initialize. File missing.
    06/14/14 11:41:50:067 | [WARN] |  | ASU | OPM | IMSLibData |  |  | 1424 | IMSLibData destructor completed
    06/14/14 11:41:56:987 | [ERROR] |  | ASU | PIM | PIM |  |  | 12296 | Failed to Move srcPath:C:\Program Files (x86)\Adobe\Adobe Creative Cloud destPath:C:\Users\Stefan\AppData\Local\Temp\\{7C97F705-ADDE-409B-9ABF-75ADEC23094E}\Adobe Creative Cloud error :5
    06/14/14 11:41:56:987 | [ERROR] |  | ASU | PIM | PIM-Uninstall |  |  | 12296 | Failed to move folder 'C:\Program Files (x86)\Adobe\Adobe Creative Cloud' to 'C:\Users\Stefan\AppData\Local\Temp\\{7C97F705-ADDE-409B-9ABF-75ADEC23094E}\Adobe Creative Cloud'
    06/14/14 11:41:56:987 | [ERROR] |  | ASU | PIM | PIM-Uninstall |  |  | 12296 | Failed to remove ACCC Files.
    06/14/14 11:41:56:987 | [ERROR] |  | ACC-Uninstaller |  | Uninstaller |  |  | 12296 | ACC uninstallation failed. RetVal: -8
    06/14/14 11:41:57:019 | [ERROR] |  | ACC-Uninstaller |  | Uninstaller |  |  | 12296 | Unable to unload AdobePIM library properly.
    06/14/14 11:41:57:019 | [ERROR] |  | ACC-Uninstaller |  | Uninstaller |  |  | 12296 | Failed to remove folders.
    6/14/2014 12:17:04 [ERROR] Setup - Error finding locale language dictionary file. Defaulting to english.
    6/14/2014 12:17:04 [ERROR] Setup - Error finding english dictionary file.
    6/14/2014 12:17:04 [ERROR] Setup - Unable to initialize ZString library
    6/14/2014 12:19:44 [ERROR] Setup - Error finding locale language dictionary file. Defaulting to english.
    6/14/2014 12:19:44 [ERROR] Setup - Error finding english dictionary file.
    6/14/2014 12:19:44 [ERROR] Setup - Unable to initialize ZString library
    6/14/2014 12:19:44 [FATAL] Setup - Setup.xml does not exist.
    6/14/2014 12:19:44 [FATAL] Setup - Unable to initialize. File missing.
    6/14/2014 12:19:46 [ERROR] Setup - Error finding locale language dictionary file. Defaulting to english.
    6/14/2014 12:19:46 [ERROR] Setup - Error finding english dictionary file.
    6/14/2014 12:19:46 [ERROR] Setup - Unable to initialize ZString library
    6/14/2014 12:19:46 [FATAL] Setup - Setup.xml does not exist.
    6/14/2014 12:19:46 [FATAL] Setup - Unable to initialize. File missing.
    6/14/2014 12:20:00 [ERROR] Setup - Error finding locale language dictionary file. Defaulting to english.
    6/14/2014 12:20:00 [ERROR] Setup - Error finding english dictionary file.
    6/14/2014 12:20:00 [ERROR] Setup - Unable to initialize ZString library
    6/14/2014 12:20:00 [FATAL] Setup - Setup.xml does not exist.
    6/14/2014 12:20:00 [FATAL] Setup - Unable to initialize. File missing.
    6/14/2014 12:23:51 [ERROR] Setup - Error finding locale language dictionary file. Defaulting to english.
    6/14/2014 12:23:51 [ERROR] Setup - Error finding english dictionary file.
    6/14/2014 12:23:51 [ERROR] Setup - Unable to initialize ZString library
    6/14/2014 12:23:51 [FATAL] Setup - Setup.xml does not exist.
    6/14/2014 12:23:51 [FATAL] Setup - Unable to initialize. File missing.
    6/14/2014 12:26:52 [ERROR] Setup - Error finding locale language dictionary file. Defaulting to english.
    6/14/2014 12:26:52 [ERROR] Setup - Error finding english dictionary file.
    6/14/2014 12:26:52 [ERROR] Setup - Unable to initialize ZString library
    6/14/2014 12:26:52 [FATAL] Setup - Setup.xml does not exist.
    6/14/2014 12:26:52 [FATAL] Setup - Unable to initialize. File missing.
    6/14/2014 12:31:21 [ERROR] Setup - Error finding locale language dictionary file. Defaulting to english.
    6/14/2014 12:31:21 [ERROR] Setup - Error finding english dictionary file.
    6/14/2014 12:31:21 [ERROR] Setup - Unable to initialize ZString library
    6/14/2014 12:31:52 [ERROR] Setup - Error finding locale language dictionary file. Defaulting to english.
    6/14/2014 12:31:52 [ERROR] Setup - Error finding english dictionary file.
    6/14/2014 12:31:52 [ERROR] Setup - Unable to initialize ZString library
    6/14/2014 12:31:52 [FATAL] Setup - Setup.xml does not exist.
    6/14/2014 12:31:52 [FATAL] Setup - Unable to initialize. File missing.
    6/14/2014 12:41:21 [ERROR] Setup - Error finding locale language dictionary file. Defaulting to english.
    6/14/2014 12:41:21 [ERROR] Setup - Error finding english dictionary file.
    6/14/2014 12:41:21 [ERROR] Setup - Unable to initialize ZString library
    6/14/2014 12:41:21 [FATAL] Setup - Setup.xml does not exist.
    6/14/2014 12:41:21 [FATAL] Setup - Unable to initialize. File missing.
    06/14/14 13:02:56:146 | [ERROR] |  | ASU | PIM | PIM |  |  | 4828 | CreateProcess failed (267).
    06/14/14 13:04:14:196 | [ERROR] |  | ASU | PIM | PIM |  |  | 4828 | Process CreativeCloud(URIHandler).exe could not be killed
    06/14/14 13:04:14:196 | [ERROR] |  | ASU | PIM | PIM |  |  | 4828 | Process Creative Cloud Helper.exe could not be killed
    06/14/14 13:04:14:196 | [ERROR] |  | ASU | PIM | PIM |  |  | 4828 | Process Creative Cloud Uninstaller.exe could not be killed
    06/14/14 13:05:40:969 | [ERROR] |  | ASU | PIM | PIM |  |  | 4828 | Setting values for registry Key SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\Adobe Creative Cloud
    06/14/14 13:05:40:969 | [ERROR] |  | ASU | PIM | PIM |  |  | 4828 | AAM ref file already exists at  2 C:\Program Files (x86)\Common Files\Adobe\AdobeApplicationManager\AAMRefs/ACC.aamref/RefCount.txt
    06/14/14 13:08:09:854 | [ERROR] |  | ASU | OPM | P7Native |  |  | 1928 | ACCC : Cannot find LEIDs/LEID tags in the request data
    6/14/2014 13:10:27 [ERROR] Setup - Error finding locale language dictionary file. Defaulting to english.
    6/14/2014 13:10:27 [ERROR] Setup - Error finding english dictionary file.
    6/14/2014 13:10:27 [ERROR] Setup - Unable to initialize ZString library
    6/14/2014 13:10:27 [FATAL] Setup - Setup.xml does not exist.
    6/14/2014 13:10:27 [FATAL] Setup - Unable to initialize. File missing.
    6/14/2014 13:17:20 [ERROR] Setup - Error finding locale language dictionary file. Defaulting to english.
    6/14/2014 13:17:20 [ERROR] Setup - Error finding english dictionary file.
    6/14/2014 13:17:20 [ERROR] Setup - Unable to initialize ZString library
    6/14/2014 13:17:20 [FATAL] Setup - Setup.xml does not exist.
    6/14/2014 13:17:20 [FATAL] Setup - Unable to initialize. File missing.
    6/14/2014 13:17:24 [ERROR] Setup - Error finding locale language dictionary file. Defaulting to english.
    6/14/2014 13:17:24 [ERROR] Setup - Error finding english dictionary file.
    6/14/2014 13:17:24 [ERROR] Setup - Unable to initialize ZString library
    6/14/2014 13:17:24 [FATAL] Setup - Setup.xml does not exist.
    6/14/2014 13:17:24 [FATAL] Setup - Unable to initialize. File missing.
    6/14/2014 13:10:32 [ERROR] Setup - Error finding locale language dictionary file. Defaulting to english.
    6/14/2014 13:10:32 [ERROR] Setup - Error finding english dictionary file.
    6/14/2014 13:10:32 [ERROR] Setup - Unable to initialize ZString library
    6/14/2014 13:10:32 [FATAL] Setup - Setup.xml does not exist.
    6/14/2014 13:10:32 [FATAL] Setup - Unable to initialize. File missing.
    6/14/2014 13:26:53 [ERROR] Setup - Error finding locale language dictionary file. Defaulting to english.
    6/14/2014 13:26:53 [ERROR] Setup - Error finding english dictionary file.
    6/14/2014 13:26:53 [ERROR] Setup - Unable to initialize ZString library
    6/14/2014 13:26:53 [FATAL] Setup - Setup.xml does not exist.
    6/14/2014 13:26:53 [FATAL] Setup - Unable to initialize. File missing.
    6/14/2014 13:42:35 [ERROR] Setup - Error finding locale language dictionary file. Defaulting to english.
    6/14/2014 13:42:35 [ERROR] Setup - Error finding english dictionary file.
    6/14/2014 13:42:35 [ERROR] Setup - Unable to initialize ZString library
    6/14/2014 13:42:35 [FATAL] Setup - Setup.xml does not exist.
    6/14/2014 13:42:35 [FATAL] Setup - Unable to initialize. File missing.
    6/14/2014 13:52:02 [ERROR] Setup - Error finding locale language dictionary file. Defaulting to english.
    6/14/2014 13:52:02 [ERROR] Setup - Error finding english dictionary file.
    6/14/2014 13:52:02 [ERROR] Setup - Unable to initialize ZString library
    6/14/2014 13:52:02 [FATAL] Setup - Setup.xml does not exist.
    6/14/2014 13:52:02 [FATAL] Setup - Unable to initialize. File missing.
    06/14/14 13:52:41:307 | [ERROR] |  | ASU | OPM | P7Native |  |  | 1780 | ACCC : Cannot find LEIDs/LEID tags in the request data
    06/14/14 13:57:13:245 | [ERROR] |  | ASU | PIM | PIM |  |  | 5692 | Failed to Move srcPath:C:\Program Files (x86)\Adobe\Adobe Creative Cloud destPath:C:\Users\Stefan\AppData\Local\Temp\\{CC352008-55F6-48A1-85CB-73E13CD26821}\Adobe Creative Cloud error :5
    06/14/14 13:57:13:245 | [ERROR] |  | ASU | PIM | PIM-Uninstall |  |  | 5692 | Failed to move folder 'C:\Program Files (x86)\Adobe\Adobe Creative Cloud' to 'C:\Users\Stefan\AppData\Local\Temp\\{CC352008-55F6-48A1-85CB-73E13CD26821}\Adobe Creative Cloud'
    06/14/14 13:57:13:245 | [ERROR] |  | ASU | PIM | PIM-Uninstall |  |  | 5692 | Failed to remove ACCC Files.
    06/14/14 13:57:13:245 | [ERROR] |  | ACC-Uninstaller |  | Uninstaller |  |  | 5692 | ACC uninstallation failed. RetVal: -8
    06/14/14 13:57:13:261 | [ERROR] |  | ACC-Uninstaller |  | Uninstaller |  |  | 5692 | Unable to unload AdobePIM library properly.
    06/14/14 13:57:13:261 | [ERROR] |  | ACC-Uninstaller |  | Uninstaller |  |  | 5692 | Failed to remove folders.
    06/14/14 13:59:49:116 | [ERROR] |  | ASU | OPM | P7Native |  |  | 1780 | ACCC : Cannot find LEIDs/LEID tags in the request data
    06/14/14 13:59:52:128 | [ERROR] |  | ASU | PIM | PIM |  |  | 5084 | Process returned error:201
    06/14/14 13:59:52:128 | [ERROR] |  | ASU | PIM | PIM |  |  | 5084 | Error occurred executing uninstall modifier at path: 'C:\Program Files (x86)\Adobe\Adobe Creative Cloud\CoreSync\customhook\CoreSyncCustomHook.exe'. Error code: 201
    06/14/14 13:59:56:168 | [ERROR] |  | ACC-Uninstaller |  | Uninstaller |  |  | 5084 | Unable to unload AdobePIM library properly.
    06/14/14 13:59:56:262 | [ERROR] |  | ASU | PIM | Utilities |  |  | 2780 | CreateProcess failed (267).
    06/14/14 14:00:01:535 | [ERROR] |  | ASU | PIM | PIM |  |  | 2780 | Unable to free PIM object
    6/14/2014 16:02:47 [ERROR] Setup - Error finding locale language dictionary file. Defaulting to english.
    6/14/2014 16:02:47 [ERROR] Setup - Error finding english dictionary file.
    6/14/2014 16:02:47 [ERROR] Setup - Unable to initialize ZString library
    6/14/2014 16:02:47 [FATAL] Setup - Setup.xml does not exist.
    6/14/2014 16:02:47 [FATAL] Setup - Unable to initialize. File missing.
    06/14/14 16:10:15:499 | [ERROR] |  | ASU | AAMCustomHook | AAMCustomHook |  |  | 4628 | Inventory not present at Location: 'C:\Program Files (x86)\Common Files\Adobe\OOBE\PDApp\\UWA\updaterinventory.dll'
    06/14/14 16:14:03:629 | [ERROR] |  | ASU | PIM | PIM |  |  | 8580 | CreateProcess failed (267).
    06/14/14 16:15:52:208 | [ERROR] |  | ASU | PIM | PIM |  |  | 8580 | Process CreativeCloud(URIHandler).exe could not be killed
    06/14/14 16:15:52:208 | [ERROR] |  | ASU | PIM | PIM |  |  | 8580 | Process Creative Cloud Helper.exe could not be killed
    06/14/14 16:15:52:208 | [ERROR] |  | ASU | PIM | PIM |  |  | 8580 | Process Creative Cloud Uninstaller.exe could not be killed
    06/14/14 16:16:58:883 | [ERROR] |  | ASU | PIM | PIM |  |  | 8580 | Setting values for registry Key SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\Adobe Creative Cloud
    06/14/14 16:31:27:792 | [ERROR] |  | ASU | OPM | P7Native |  |  | 5228 | ACCC : Cannot find LEIDs/LEID tags in the request data
    6/14/2014 16:43:06 [ERROR] Setup - Error finding locale language dictionary file. Defaulting to english.
    6/14/2014 16:43:06 [ERROR] Setup - Error finding english dictionary file.
    6/14/2014 16:43:06 [ERROR] Setup - Unable to initialize ZString library
    6/14/2014 16:43:06 [FATAL] Setup - Setup.xml does not exist.
    6/14/2014 16:43:06 [FATAL] Setup - Unable to initialize. File missing.
    06/14/14 16:46:24:800 | [ERROR] |  | ASU | LWANative | OPM |  |  | 5776 | received empty url from dispatchlib
    06/14/14 16:46:29:449 | [ERROR] |  | ASU | LWANative | P7Native |  |  | 5776 | OOBElib returned error: 42
    06/14/14 16:49:04:438 | [ERROR] |  | ASU | LWANative | OPM |  |  | 4344 | received empty url from dispatchlib
    06/14/14 16:49:10:113 | [ERROR] |  | ASU | LWANative | P7Native |  |  | 4344 | OOBElib returned error: 42
    6/14/2014 17:06:21 [ERROR] Setup - Error finding locale language dictionary file. Defaulting to english.
    6/14/2014 17:06:21 [ERROR] Setup - Error finding english dictionary file.
    6/14/2014 17:06:21 [ERROR] Setup - Unable to initialize ZString library
    6/14/2014 17:06:21 [FATAL] Setup - Setup.xml does not exist.
    6/14/2014 17:06:21 [FATAL] Setup - Unable to initialize. File missing.
    06/14/14 17:13:05:437 | [ERROR] |  | ASU | AAMCustomHook | AAMCustomHook |  |  | 4372 | Inventory not present at Location: 'C:\Program Files (x86)\Common Files\Adobe\OOBE\PDApp\\UWA\updaterinventory.dll'
    06/14/14 17:16:38:593 | [ERROR] |  | ASU | PIM | PIM |  |  | 4472 | CreateProcess failed (267).
    06/14/14 17:18:24:378 | [ERROR] |  | ASU | PIM | PIM |  |  | 4472 | Process CreativeCloud(URIHandler).exe could not be killed
    06/14/14 17:18:24:378 | [ERROR] |  | ASU | PIM | PIM |  |  | 4472 | Process Creative Cloud Helper.exe could not be killed
    06/14/14 17:18:24:393 | [ERROR] |  | ASU | PIM | PIM |  |  | 4472 | Process Creative Cloud Uninstaller.exe could not be killed
    06/14/14 17:19:33:131 | [ERROR] |  | ASU | PIM | PIM |  |  | 4472 | Setting values for registry Key SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\Adobe Creative Cloud
    06/14/14 17:21:08:140 | [ERROR] |  | ASU | OPM | P7Native |  |  | 1572 | ACCC : Cannot find LEIDs/LEID tags in the request data
    6/14/2014 17:36:25 [ERROR] Setup - Error finding locale language dictionary file. Defaulting to english.
    6/14/2014 17:36:25 [ERROR] Setup - Error finding english dictionary file.
    6/14/2014 17:36:25 [ERROR] Setup - Unable to initialize ZString library
    6/14/2014 17:36:25 [FATAL] Setup - Setup.xml does not exist.
    6/14/2014 17:36:25 [FATAL] Setup - Unable to initialize. File missing.
    6/14/2014 17:40:42 [ERROR] Setup - Error finding locale language dictionary file. Defaulting to english.
    6/14/2014 17:40:42 [ERROR] Setup - Error finding english dictionary file.
    6/14/2014 17:40:42 [ERROR] Setup - Unable to initialize ZString library
    6/14/2014 17:40:42 [FATAL] Setup - Setup.xml does not exist.
    6/14/2014 17:40:42 [FATAL] Setup - Unable to initialize. File missing.
    06/14/14 18:16:12:120 | [ERROR] |  | ACC-Uninstaller |  | Uninstaller |  |  | 7080 | Unable to unload AdobePIM library properly.
    06/14/14 18:16:12:135 | [ERROR] |  | ACC-Uninstaller |  | Uninstaller |  |  | 7080 | Failed to delete C:\Users\Stefan\AppData\Local\Adobe\OOBE\com.adobe.accc.home
    06/14/14 18:16:12:526 | [ERROR] |  | ASU | PIM | Utilities |  |  | 5292 | CreateProcess failed (267).
    06/14/14 18:16:19:065 | [ERROR] |  | ASU | PIM | PIM |  |  | 5292 | Unable to free PIM object
    6/14/2014 18:43:51 [ERROR] Setup - Error finding locale language dictionary file. Defaulting to english.
    6/14/2014 18:43:51 [ERROR] Setup - Error finding english dictionary file.
    6/14/2014 18:43:51 [ERROR] Setup - Unable to initialize ZString library
    6/14/2014 18:43:51 [FATAL] Setup - Setup.xml does not exist.
    6/14/2014 18:43:51 [FATAL] Setup - Unable to initialize. File missing.
    6/14/2014 18:48:04 [ERROR] Setup - Error finding locale language dictionary file. Defaulting to english.
    6/14/2014 18:48:04 [ERROR] Setup - Error finding english dictionary file.
    6/14/2014 18:48:04 [ERROR] Setup - Unable to initialize ZString library
    6/14/2014 18:48:04 [FATAL] Setup - Setup.xml does not exist.
    6/14/2014 18:48:04 [FATAL] Setup - Unable to initialize. File missing.
    6/14/2014 18:57:10 [ERROR] Setup - Error finding locale language dictionary file. Defaulting to english.
    6/14/2014 18:57:10 [ERROR] Setup - Error finding english dictionary file.
    6/14/2014 18:57:10 [ERROR] Setup - Unable to initialize ZString library
    6/14/2014 18:57:10 [FATAL] Setup - Setup.xml does not exist.
    6/14/2014 18:57:10 [FATAL] Setup - Unable to initialize. File missing.
    6/14/2014 19:35:02 [ERROR] Setup - Error finding locale language dictionary file. Defaulting to english.
    6/14/2014 19:35:02 [ERROR] Setup - Error finding english dictionary file.
    6/14/2014 19:35:02 [ERROR] Setup - Unable to initialize ZString library
    6/14/2014 19:35:02 [FATAL] Setup - Setup.xml does not exist.
    6/14/2014 19:35:02 [FATAL] Setup - Unable to initialize. File missing.
    6/14/2014 19:35:08 [ERROR] Setup - Error finding locale language dictionary file. Defaulting to english.
    6/14/2014 19:35:08 [ERROR] Setup - Error finding english dictionary file.
    6/14/2014 19:35:08 [ERROR] Setup - Unable to initialize ZString library
    6/14/2014 19:35:08 [FATAL] Setup - Setup.xml does not exist.
    6/14/2014 19:35:08 [FATAL] Setup - Unable to initialize. File missing.
    6/14/2014 20:33:29 [ERROR] Setup - Error finding locale language dictionary file. Defaulting to english.
    6/14/2014 20:33:29 [ERROR] Setup - Error finding english dictionary file.
    6/14/2014 20:33:29 [ERROR] Setup - Unable to initialize ZString library
    6/14/2014 20:33:29 [FATAL] Setup - Setup.xml does not exist.
    6/14/2014 20:33:29 [FATAL] Setup - Unable to initialize. File missing.
    6/14/2014 21:47:33 [ERROR] Setup - Error finding locale language dictionary file. Defaulting to english.
    6/14/2014 21:47:33 [ERROR] Setup - Error finding english dictionary file.
    6/14/2014 21:47:33 [ERROR] Setup - Unable to initialize ZString library
    6/14/2014 21:47:33 [FATAL] Setup - Setup.xml does not exist.
    6/14/2014 21:47:33 [FATAL] Setup - Unable to initialize. File missing.
    06/15/14 16:52:16:579 | [ERROR] |  | ASU | AAMCustomHook | AAMCustomHook |  |  | 1492 | Inventory not present at Location: 'C:\Program Files (x86)\Common Files\Adobe\OOBE\PDApp\\UWA\updaterinventory.dll'
    6/15/2014 16:56:36 [ERROR] Setup - Error finding locale language dictionary file. Defaulting to english.
    6/15/2014 16:56:36 [ERROR] Setup - Error finding english dictionary file.
    6/15/2014 16:56:36 [ERROR] Setup - Unable to initialize ZString library
    6/15/2014 16:56:36 [FATAL] Setup - Setup.xml does not exist.
    6/15/2014 16:56:36 [FATAL] Setup - Unable to initialize. File missing.
    6/15/2014 17:01:19 [ERROR] Setup - Error finding locale language dictionary file. Defaulting to english.
    6/15/2014 17:01:19 [ERROR] Setup - Error finding english dictionary file.
    6/15/2014 17:01:19 [ERROR] Setup - Unable to initialize ZString library
    6/15/2014 17:01:19 [FATAL] Setup - Setup.xml does not exist.
    6/15/2014 17:01:19 [FATAL] Setup - Unable to initialize. File missing.
    06/15/14 17:03:45:215 | [ERROR] |  | ASU | AAMCustomHook | AAMCustomHook |  |  | 5128 | Inventory not present at Location: 'C:\Program Files (x86)\Common Files\Adobe\OOBE\PDApp\\UWA\updaterinventory.dll'
    6/15/2014 17:04:56 [ERROR] Setup - Error finding locale language dictionary file. Defaulting to english.
    6/15/2014 17:04:56 [ERROR] Setup - Error finding english dictionary file.
    6/15/2014 17:04:56 [ERROR] Setup - Unable to initialize ZString library
    6/15/2014 17:04:56 [FATAL] Setup - Setup.xml does not exist.
    6/15/2014 17:04:56 [FATAL] Setup - Unable to initialize. File missing.
    06/15/14 17:07:20:253 | [ERROR] |  | ASU | PIM | PIM |  |  | 5336 | CreateProcess failed (267).
    06/15/14 17:09:07:737 | [ERROR] |  | ASU | PIM | PIM |  |  | 5336 | Process CreativeCloud(URIHandler).exe could not be killed
    06/15/14 17:09:07:752 | [ERROR] |  | ASU | PIM | PIM |  |  | 5336 | Process Creative Cloud Helper.exe could not be killed
    06/15/14 17:09:07:752 | [ERROR] |  | ASU | PIM | PIM |  |  | 5336 | Process Creative Cloud Uninstaller.exe could not be killed
    06/15/14 17:10:08:686 | [ERROR] |  | ASU | PIM | PIM |  |  | 5336 | Setting values for registry Key SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\Adobe Creative Cloud
    06/15/14 17:11:37:076 | [ERROR] |  | ASU | OPM | P7Native |  |  | 2140 | ACCC : Cannot find LEIDs/LEID tags in the request data
    06/15/14 18:26:02:586 | [ERROR] |  | ASU | OPM | CryptEngine |  |  | 3564 | Failed in key3List generation
    06/15/14 18:26:06:033 | [ERROR] |  | ASU | OPM | CryptEngine |  |  | 3564 | Failed in key3List generation
    06/15/14 18:26:09:591 | [ERROR] |  | ASU | OPM | CryptEngine |  |  | 3564 | Failed in key3List generation
    06/15/14 18:26:17:812 | [ERROR] |  | ASU | OPM | CryptEngine |  |  | 3564 | Failed in key3List generation
    06/15/14 18:26:24:193 | [ERROR] |  | ASU | OPM | CryptEngine |  |  | 3900 | Failed in key3List generation
    06/15/14 18:26:26:735 | [ERROR] |  | ASU | OPM | CryptEngine |  |  | 3900 | Failed in key3List generation
    06/15/14 18:26:29:606 | [ERROR] |  | ASU | OPM | CryptEngine |  |  | 3900 | Failed in key3List generation
    06/15/14 18:28:20:953 | [ERROR] |  | ASU | OPM | CryptEngine |  |  | 3396 | Failed in key3List generation
    06/15/14 18:28:22:808 | [ERROR] |  | ASU | OPM | CryptEngine |  |  | 3396 | Failed in key3List generation
    06/15/14 18:28:44:834 | [ERROR] |  | ASU | OPM | CryptEngine |  |  | 5056 | Failed in key3List generation
    06/15/14 18:34:14:628 | [FATAL] |  | ASU | PDApp | PDApp |  |  | 5668 | Another deployment workflow already running.
    06/15/14 18:34:14:628 | [ERROR] |  | ASU | PDApp | PDApp |  |  | 5668 | Error finding locale language dictionary file. Defaulting to english.
    06/15/14 18:34:32:187 | [FATAL] |  | ASU | PDApp | PDApp |  |  | 2544 | Another deployment workflow already running.
    06/15/14 18:34:32:187 | [ERROR] |  | ASU | PDApp | PDApp |  |  | 2544 | Error finding locale language dictionary file. Defaulting to english.
    06/15/14 18:35:02:236 | [FATAL] |  | ASU | PDApp | PDApp |  |  | 4636 | Another deployment workflow already running.
    06/15/14 18:35:02:236 | [ERROR] |  | ASU | PDApp | PDApp |  |  | 4636 | Error finding locale language dictionary file. Defaulting to english.
    6/15/2014 18:37:24 [ERROR] Setup - Error finding locale language dictionary file. Defaulting to english.
    6/15/2014 18:37:24 [ERROR] Setup - Error finding english dictionary file.
    6/15/2014 18:37:24 [ERROR] Setup - Unable to initialize ZString library
    6/15/2014 18:37:24 [FATAL] Setup - Setup.xml does not exist.
    6/15/2014 18:37:24 [FATAL] Setup - Unable to initialize. File missing.
    6/15/2014 19:08:56 [ERROR] Setup - Error finding locale language dictionary file. Defaulting to english.
    6/15/2014 19:08:56 [ERROR] Setup - Error finding english dictionary file.
    6/15/2014 19:08:56 [ERROR] Setup - Unable to initialize ZString library
    6/15/2014 19:08:56 [FATAL] Setup - Setup.xml does not exist.
    6/15/2014 19:08:56 [FATAL] Setup - Unable to initialize. File missing.
    6/15/2014 19:10:48 [ERROR] Setup - Error finding locale language dictionary file. Defaulting to english.
    6/15/2014 19:10:48 [ERROR] Setup - Error finding english dictionary file.
    6/15/2014 19:10:48 [ERROR] Setup - Unable to initialize ZString library
    6/15/2014 19:10:48 [FATAL] Setup - Setup.xml does not exist.
    6/15/2014 19:10:48 [FATAL] Setup - Unable to initialize. File missing.
    6/17/2014 12:14:16 [ERROR] Setup - Error finding locale language dictionary file. Defaulting to english.
    6/17/2014 12:14:16 [ERROR] Setup - Error finding english dictionary file.
    6/17/2014 12:14:16 [ERROR] Setup - Unable to initialize ZString library
    6/17/2014 12:14:16 [FATAL] Setup - Setup.xml does not exist.
    6/17/2014 12:14:16 [FATAL] Setup - Unable to initialize. File missing.
    6/17/2014 12:35:38 [ERROR] Setup - Error finding locale language dictionary file. Defaulting to english.
    6/17/2014 12:35:38 [ERROR] Setup - Error finding english dictionary file.
    6/17/2014 12:35:38 [ERROR] Setup - Unable to initialize ZString library
    6/17/2014 12:35:38 [FATAL] Setup - Setup.xml does not exist.
    6/17/2014 12:35:38 [FATAL] Setup - Unable to initialize. File missing.
    6/17/2014 20:54:13 [ERROR] Setup - Error finding locale language dictionary file. Defaulting to english.
    6/17/2014 20:54:13 [ERROR] Setup - Error finding english dictionary file.
    6/17/2014 20:54:13 [ERROR] Setup - Unable to initialize ZString library
    6/17/2014 20:54:13 [FATAL] Setup - Setup.xml does not exist.
    6/17/2014 20:54:13 [FATAL] Setup - Unable to initialize. File missing.

  • IMac doesn't detect the base station correctly (with new base station)

    I have a brand new Airport Express. I'm trying to connect to my iMac G5. Everything works fine in the start up with getting the green light on the Express base station. But, my iMac doesn't "connect" with the base station.
    I try the "Airport Setup Assistant" and get a window that says "No new Airport networks were found."
    I look at the "pie" at the top of the iMac screen. It has the white and black stripes on it. I click it and find "Apple Network e3fec9" and select it. The signal level shown has all blue buttons. That window also reports "Status: Connected to 'Apple Network e3fec9'" and "Base Station ID:00:19:E3:E3:FE:C9". That's what makes me think that my problem must be in the iMac and not the base station.
    I had also tried my Dell laptop (from work) and found that it found the internet network. It detected the "local host" and "Apple Network" and the signal strength was very good (~90% or so). The only problem was that the laptop thought it needed to recreate an IP address before it could connect to the internet. I didn't do that, since I saw it was detecting the network.
    Please help. Why should this be so hard?
    iMac   Mac OS X (10.4.9)   none

    I'm confused. You say you're connected to "Apple Network e3fec9", and you're having trouble connecting your iMac? It sounds like you've managed to connect to your Airport Base Station.
    Have you configured the Internet settings for the base station? Try this:
    1. Launch Airport Admin Utility (in /Applications/Utilities/) select "Apple Network e3fec9" and click Configure.
    2. Under the Airport tab, give the base station a name, click the Base Station Options… button, and make sure Enable Ethernet Port is checked.
    3. Select Create a Wireless Network (Home Router) if it isn't already selected, give your network a name, and check Create a closed network
    4.Click the Wireless Security button and set it to WPA Personal, and enter a password.
    5. Under the Internet tab, set Connect Using: to Ethernet, and in the Configure dropdown, select Using DHCP
    6. Click the Access Control tab and click the plus button on the right side of the window. In the panel that pops up, click the This Computer button.
    7. Click Update
    I'm hoping it's something simple, like Enable Ethernet Port wasn't checked or something, and not something more serious.
    Hope it helps.
    Rob
    17 iMac G5 Mac OS X (10.4.2)
    17 iMac G5 Mac OS X (10.4.2)
    17 iMac G5 Mac OS X (10.4.2)
    17 iMac G5 Mac OS X (10.4.2)

  • Macbook Pro retina display 13 inch stopped charging. Charger LED also not on while plugged in. The battery fully drained off but the system can detect the charger when it was switched on.

    Macbook Pro retina display 13 inch 2014 model stopped charging. Charger LED also not on while plugged in. The battery fully drained off so the system can not be started but the system can detect the charger when earlier it was switched on before draining off the charge. Charger type magsafe 60W.

    Once you have examined the power inlet on the computer for dirt, and made certain that the pins on the end of the MagSafe cord are free to move in and out to make contact, there is very little you can do yourself.
    You will need to visit your Apple Store (FREE with appointment) or your Apple-Authorized Service Provider (policy varies). They work on these all the time and have good expertise and lots of spare parts to try to determine the problem.

  • Won't detect the router.

    Hi,
    I am trying to install a WRT54G model router. It goes through the setup and all the lights and everything else is correct but when the software tries to detect the router it always says the is cannot detect it.  I am able to access the router with 192.168.1.1  so the cables work, but i don' t know what to do at that stage.  My computer is running XP if this is an issue.  I have no experience with networks. This is my first time installing a router
    Thanks

    ISP?
    •if you're running cable ISP go to MAC ADDRESS clone on the blue tab click enable and click clone your pc's mac - don't forget to save settings
    •if you wanna personalize wireless settings go to wireless creat your own network name
    •if you want a secured wireless network go to wireless security subtab on the blue bar - i suggest WEP encryption
    •then last thing go to status tab and check if you have internet ip address , if yes power cycle modem and router for 1 minute check internet connection after
    •if DSL who's the ISP? what's that brand of the modem?

  • I am not able to set up my ipad2 - tried the regular help but nothing seems to working. itune simply wont detect the ipad

    i am not able to set up my ipad2 - tried the regular apple help - did all those routines - but nothing seems to working. itune simply wont detect the ipad

    http://support.apple.com/kb/TS1538

Maybe you are looking for

  • GUI_UPLOAD - excel file

    Hi All, I am using gui_upload for uploading excel file. Following parameters I am passing file name     - c:\datafile.xls file type     - asc HEADER_LENGTH - 0 READ_BY_LINE  - X But in testing the function module in se37 it is taking (#) characters.

  • Error in DBMS_DATAPUMP.ADD_FILE method

    hello ... I want to create one procedure that export my database using DBMS_DATAPUMP, But I got Error in DBMS_DATAPUMP.ADD_FILE method. The procedure is as below: CREATE OR REPLACE PROCEDURE sp_export AS idx NUMBER; -- Loop index JobHandle NUMBER; --

  • Flash update problem

    Last night I received a software update for my Adoby Acrobat 9 program. I updated the program without thinking twice about it. Now though, when I try to view any forms that I have distributed before the update, I can no longer view the form responses

  • Old recovery content after Win7 Upgrade

    Hi all. I got a L500 13T before Windows 7, so I had Vista home premium. After Win7 released I got Win7 Professional, with clean install. As I was downloading the Toshiba software after the installation, I noticed Toshiba Recovery Disk Creator was not

  • Sorting manually within film roll view

    is there any way to sort my photos manually (move them around in prefered order) within the film roll view? just started using the film roll view. and i love it, all exept that it will only sort by date and i can not move photos around with in the fi