Determination of Excise Duty

hi all
i have an issue regarding Determination of Excise Duty. i have created excise indicator for plant and excise indicator for customer and i created final excise indicator i assigned excise indicator to plant as well as to customer, in J1ID in step excise indicator for plant and customer i assigned the final excise indicator. and in excise tax rate option for the chapter id final excise indicator i assigned excise rate as 4%.
my question is as i have already defined JEXP as 8% how the system will over write this? what happens to the already created condition record for JEXP?
regards
Rag

If you are in TAXINJ, system will consider J1ID
If you are in TAXINN, system will consider FV11 / VK11 / VK19
thanks
G. Lakshmipathi

Similar Messages

  • Profit Center determination for Excise Duty Recovered

    Hello,
    At the time billing, all the line items are picking Profit center from the Sales Order except the Excise duty recovered account which is picking some other profit center.
    Kindly, help me to analyse how the Profit center is determined for the Excise Duty.
    Regards,
    Muneer Ahamed N

    Hi,
    You can download from the below link
    http://uploading.com/files/55b781e2/sapnote_0001576560%2B%25281%2529.pdf/
    Regards,
    Muneer Ahamed N

  • Excise duty in the Pricing Procedure for Local Purchase / Importation

    Hi,
    I'd like to know how to set up the pricing procedure for the purchase of an IS Oil Material; for local purchase and importation, especially with regards to the excise duty posting.
    Local purchase:  the vendor will bill us inclusive of the ED tax he previously paid, so the tax is just passed on to us..  My receiving location has ED paid status. In the PO item, we need to see this price (inclusive of tax) in the net price field.
    Importation:  the vendor only bills us the cost of the material.  When we received the fuel, we paid ED tax to local tax authorities.
    I know that both in these scenarios, the system has to determine the excise duty.
    My questions are (1) how do you set up the excise duty condition type  in the pricing procedure(or do they have to be maintained in the pricing procedure?) ?   and (2)  how do you set up this condition type in the config?
    Thank you and hoping for your immediate feedback.
    zccr

    Hi,
    You can use same pricing procedure
    put 4 in subtotal in pricing procedure against the Discounr or freight cond
    and in taxinn
    BASb ALTCBV 362 and for jmop 363
    But this will work only if same  discount or freight value is in IV as that given in PO
    if freing value changes in IV then its a problem
    This is SAP bug, and SAP workes in that way only, freight value should be same in PO and IV
    other solution
    in taxinn create tax code like v8 vat 4% for 003 tax clasification
    in ftxp create tax code V8 desc vat 4%
    in fv11 for jvrd put 4
    and at the time of IV put this tax code for freight amount
    and for regular material value V1 tax code
    this will work only if u have used acess seq MWST instead of JTAX pr JST1
    hope this helps
    Vipin

  • Excise invoice - basic excise duty not appearing

    Hi,
    I am creating excise invoice in ECC 6.0 . Education cess is appearing in the excise invoice. However, basic excise duty and secondary education cess are not appearing. I understand that some notes have to be applied for secondary education cess. 
    I am using TAXINN.
    In accounting document, basic excise duty, education cess and secondary education cess are appearing.
    Kindly reply as to the place where I have made a mistake for setting of basic excise duty.
    Regards,
    T Saravanan

    Dear  Saravanan,
    Already our friend MBS suggested in detail to that
    Please check the configuration settings in the IMG through this Path
    IMG>Logistics General>Tax on goods movements>India>Basic settings>Determination of excise duty>Maintain Excise defaults here have you maintained basic excise duty and secondary education cess condition types for your TAXINN procedure.
    Also check the commercial invoice have you getting basic excise duty and secondary education cess in the commercial invoice.
    Is this first time you are trying to create excise invoice or recently you are getting this issue.
    If you are getting suddenly means ask BASIS people are they applied ant patches recenlty then proceed accordingly.
    If all settings are perfect then you can raise the OSS note to the SAP people.
    I hope this will help you,
    Regards,
    Murali.

  • Excise Duty, Cess and Secondary Cess not displaying in J1IIN

    Dear Frnds,
    I need a solution for Excise Duty, Cess and Secondary Cess not displaying in J1IIN ( WHILE EXCISE ) but in  Invoice it is calculated correctly., ( ie., i need CENVAT Posted, not utilized
    after excise invoice generated )
    kindly suggest me...
    Thanks & Regards
    T.Arulvanan

    HI.
    Plz check the forllowing settings,
    IMG - Logistic General - Tax on Goods Mvt - India -  Basic Settings -
    1. Maintain Excise Registrations -
           Check Proper Indicator for Cess and other settings.
    2. Maintain Company Code Settings
    3. Maintain Plant Settings
    4. Maintain Excise Groups
    5. Maintain Series Groups
    6. Maintain Excise Duty Indicators
    -- Determination of Excise Duty
    7. Select Tax Calculation Procedure
    --Condition-Based Excise Determination
    8. Define Tax code and assign it to company code
    Properly maintiain fallowing settings and try again..
    Prashant

  • Excise duty values not flowing from PO to MIGO

    All SAP Gurus,
    We have created a PO and used excisable tax code in it.
    Excise duties are calculated correctly in PO.
    When we go for Goods receipt against the PO, excise tab appears, but there are no values in excise fields (fiels are blank).
    System allows us to enter the Excise duty values manually.
    Further excise entries and register updates are happening correcetly.
    We do not undersatnd why the Excise duty values are not flowing automatically from PO to GR (MIGO).
    Please help.
    Regards,

    hi
    chekc following
    path: spro>logistic general >tax on goods movements>india >basic settings>determination of excise duty >maintain excise defaults >
    here give appripriate conditions for ur procedure as per BED   cess and other
    regards
    kunal

  • Manual Excise duty with fixed amount in Sales order

    Dear Sir/Madam.,
    This is regarding manual excise duty with fixed amount in SD Module . I
    have created three conditon type ZEXP,ZECS,ZA1X for BED ,CESS and HSED for manual excise duty with fixed amount, other than the standard condition type JEXP,JECS,JA1X , because  my TRADING SALE scenario needs both condition type with fixed percentage and fixed amount conditions also.  After the pricing procedure updation for trading sale, I have tried to create the sale invoice with VF01 , it is ok till  the VF01 for manual excise duty but when ever I tried to excise posting with J1IIN. the manual excise duty show only zero, whiile we used the  standard Condition type JEXP, JECS, AND JA1X with fixed percentage  8% -2% -1%  our over all steps are ok till J1IIN for excise invoice, mean BED ,CESS and HSED shown correctly.
    I have done some experiment with the TAXINN tax procedure in (Logistics general > tax on good movments> india> basic settting>determination of excise duty> Maintain excise default), I have replaced the condition types  JEXP, JECS and JA1X with the ZEXP, ZECS and  ZA1X in the corresponding filed. then after my manual excise duty with fixed amount data  was reflecting
    in the J1IIN and it start to work properly with the excise duty but my fixed percentage condition type stop to working mean, it was now showing the duty at the time of  excise duty posting J1IIN .
    I want to use both the condition types in the same TRADING SALE scenario. May anybody help me to solve this issue.
    With Regard
    Vijay Kumar

    Dear Mr. Siva,
    Sorry for the late reply, actually I was out of touch from this issue for few days. I am sending you the detail about my configuration----
    I have assigned this condition type as following ... 
    TAXINN     ZA1X     A/R AT1 Quantity based
    TAXINN     ZECS     A/R Cess Quantity Based
    TAXINN     ZEXP     A/R BED Quantity based
    Condition type information
         Control data 1
    Cond. class       D  Taxes
    Calculat.type     Q  Commodity
    Cond.category  D  Tax
    Rounding rule         Commercia
    StrucCond.
         Change which can be made---
    Manual entries      C       Manual entry has priority
    Still it is not showing the duty at the time of (J1IIN)
    It may be I am missing some configuration or wrong configuration.
    give me some hints...
    thank you
    Vijay

  • Basic Excise duty not flowing in Purchase order

    Hi,
    We are using TAX INJ and in version 4.7E. BED Percentage is not flowing in Purchase order, whereas E.cess andSEcess is flowing in PO.
    We have checked all the settings and also the replies in SDN forum on this issue. COuld anybody add further inputs where to check for this issue.
    Please revert
    Regards
    Uma

    Hi,
    First check the Tax Code in FTXP whether 100% is maintained for condition type JMO1 or not? If not then maintain
    Also check following in J1ID;
    - Chapter ID
    - Material & Chapter ID Combination
    - CENVAT Determination
    - Plant Excise Details
    - Vendor Excise Details
    - Excise Tax Rates
    If it is OK then check in SPRO > Logistics - General > Tax on Goods Movements > India > Basic Settings > Determination of Excise Duty > Maintain Excise Defaults > Assign condition type JMO1 under column A/P BED cond.
    If all above are OK then go to OBQ1 and for condition type JMO1, check the access sequence, it should be MWST. And then in FTXP, maintain 100% for condition type JMO1.
    And then check in PO.

  • Excise duty  in Purchase Order

    Dear Guru's
    Please find my query mentioned below.......
    QUERY:
    We are using Taxinn as a procedure
    Scenario: Same vendor same material same plant
    I want to create 2  Seperate PO 
    1) With Zero Excise duty
    2) With 16 % Excise Duty
    How to Solve this Query?
    Waiting for immediate response
    Regards
    Shailesh
    [email protected]

    Hi Shailesh,
    First of all you create a tax code in FTXP for zero tax code say V0 then save it.Maintain this tax code to your company code in
    IMG --> Logistic General --> Tax on goods movement --> India --> Basic settings --> Determination of excise duty --> Condition based excise determination --> Assign tax codes to company code
    Then in FV11 maintain your tax condition with 0 value only.
    Second question
    Same manner you create another tax code say V1 with excise duty 16% and assign it to your company code.
    Then in FV11 maintain tax rates with respective condition types used for excise duty and education cess.
    This way you can maintain tax codes
    Regards
    Vivek
    -- Reward for the effort

  • Excise duty 14% in PO

    Hi,
    I am not getting 14% as Excise duty against JM01 in tax in PO(getting 2% as Ecess and 1% as SEcess)
    I have maintained the j1id and Ftxp(100% against JM01).
    Is there any setting to be done.
    Where i make mistake?
    Please guide.
    Regards

    HI
    Have you mantained the excise defaults in Log gen->Tax on goods mov->India->Basic settings->Determination of excise  duty->mantain excise defaults there you need to mantain JM01excise grp and tax juricdication code->
    Which taxing proceure you are using any way???
    Let me know
    Regards
    Sujoy

  • Zero Excise duty appeared in Excise Invoice (J1IIN)

    Halo Experts,
    At the time create Excise Invoice (J1IIN) zero excise duty appeared in some cases (Not all invoice)  even duty available in billing document (VF02).
    we are unable to find out exact reason. Please help.
    Regards
    BK GAIKWAD

    hi,
    please check settings for logistics general - tax on goods movements - india - basic settings - determination of  excise duty - excise maintain excise defaults & classification of condition types & J1ID SETTINGS  - in SPRO.
    if it is correct then it flows automatically.
    please check & confirm with abaper/basis whether all patches related to CIN are updated properly or not.
    update the forum.
    balajia.

  • Excise duty not determined in goods receipt with reference to PO.

    Dear All,
    I am implementing Condition based CIN.  I have created PO and maintained all excise duties in XK11 transactions. Excise duty has determined in PO. But When I am creating MIGO with reference to PO the excise duty is not copied from Purchase order.
    Please suggest.
    Thanks & Regards

    Dear All,
    If you have any idea, Please let me know.
    Thanks & Regards

  • Excise duty determination

    Hi All,
    I would like to know, how the excise duty is determined.  We generally maintain the Excise duty rate at the J1ID and how the excise rate is taken in the Condition type JMOD
    Please explain briefly and if you have documentation related to tax determination, excise duty etc.,
    Thank you all,
    Regards,
    Mani

    Dear SD Experts,
    Can anyone reply this question?
    Please help
    Regards,
    Mani

  • Excise duty adjustment in case of customer sales return

    Hi Frnds,
    While my customer return the finished goods I am making sales return order ,done the PGR & make the credit note.
    Now I want to adjust the excise duty through J1IH
    In j1ih which option I have to choose <other adjustemnet> or <add. excise>
    In Add. Excise tab.  the Gl account detremine are :
    C   0013113920     115.00               CENVAT clearing
    D   0024822000     5.00               CENVAT Input SECess
    D   0024820000     100.00               CENVAT Input BED
    D   0024821000     10.00               CENVAT Input ECess
    Whereas In case of Other adjustment tab GL account determine are
    C  0024822000     5.00               CENVAT Input SECess
    C  0024820000     100.00               CENVAT Input BED
    C  0024821000     10.00               CENVAT Input ECess
    D  0013113920     115.00               CENVAT clearing
    Please suggest me which option is correct.......Other adj or Add excise tab.
    In my opinion it should be Add. Excise where Clearing account is credited.
    Please Give me the solution & logic.
    Regards
    Sunil

    Please help me

  • Excise duty should Inventorised ????

    Hi experts
    My query is , excise duty should calculate in PO , but while doing GR it should get inventorised.
    My tax procedure is TAXINJ.
    For V1-ED 16% + Ecess 2% + SEcess 1%+ VAT4% .
    In PO for this tax code V1 it should show
    For example Basic price - 1500
    BED - 150
    ECESS- 15
    SECESS-7.5
    Total - 1672.5 it get inventorised.
    After maintaining the same in FTXP the Excise Conditions
    §         JMOD   IN: A/R BED
    §         JCES    IN: A/R Cess
    §         JECS    A/R Educational CESS
    JN6     A/R VAT Payable
    I have created PO with same conditions ,
    While doing GR its asking for excise invoice number , i can select no excise invoice .
    But as per our condition it should not ask for excise invoice number, becas all were inventorised conditions.
    So it should not ask for excise invoice , it get posted and accounting documents should generate.
    It should be
    Inventory - Debit
    GR/IR - credit.
    Thanks
    SAP-MM

    Hi,
    As per your comments you have maintained Excise conditions as JMOD JECS etc in tax code??
    1. I guess you have to re check your tax code settings,
    These are A/P duty compnents so you will have to maintain JMOD,JEC1 & JA1S.
    2. Maintain both setoff & inventory conditions with tax percentage declared as 100% in tax code.
    3. For material plant combination cenvat determination should be deleted.
    4. You will find Excise duties flowing in inventory conditions in PO.
    After this if GRN is done , accounting will be correctly generated.
    Let me know if i can assist more in this.
    Regards

Maybe you are looking for