Determination of inspection characteristics
In the case of serialization processing, how will the shopfloor (workbench) determne when the inspection characteristics are completed and/or closed? Any information will be appreciated and points awarded thanks!
you have to valuate the characteristics with Object Dependencies
http://help.sap.com/saphelp_bw/helpdata/en/24/4766d4416711d189ec0000e81ddfac/frameset.htm
Similar Messages
-
Inspection characteristics based on material and goup counter
Hi,
Do we have some function module which would give us inspection characteristics based on material and group counter. I have gone through many posts in this regard but find answers to get inspection characteristics based on inspection lot number.
I do not want to get into quality at all. Is there a FM to get the inspection characteristics based on material and group counter or any related tables would be of gr8 help. T-code QP03 takes material and group counter as input and displays the inspection characteristics. Any input in this regard would be of great help.Hi,
Use tables MMAPL , MAPL and PLMK as per your requirement.
Thanks,
Vijay -
How to progammatically get Inspection Characteristics from Inspection Plan
How do I programmatically get Inspection Characteristics from an inspection plan? I am currently getting inspection characteristics from inspection lots via a QM-IDI RFC call (QIRF_SEND_REQUIREMENTS_GET_DAT2), but if the Inspection Characteristic is not in an inspection lot, I don't get it via the RFC call. What BAPI/RFC/IDOCS mechanism can I use from an external subsystem (VB.NET app) to get inspection characteristics (Spec Limits, Target, Operation, Activity) associated with a material in an inspection plan?
Thanks,
EdThe problem is the SAP system that my external subsystem (VB.NET application using QM-IDI) is interfacing with does not have inspection lots (and the customer is not willing to add inspection lots), so the QM-IDI RFC that I'm using (QIRF_SEND_REQUIREMENTS_GET_DAT2) does not return the inspection characteristics (spec limits, etc) that I require. My customer creates a reference (QP11) with inspection characteristics, then attaches the reference to a Material (QP01). When I try to get the inspection characteristics for the material via QIRF_SEND_REQUIREMENTS_GET_DAT2, I don't get the inspection characteristics because there is no inspection lot associated with the material and inspection characteristics.
The design is for my external subsystem to do the Material Inspection Characteristic valuation, and then send the valuation results back to SAP. Is there a way to get Material Inspection Characteristics and then send the results back given the SAP setup I described above?
Thanks,
Ed -
Date format in Master inspection characteristics
Hi All
I have a requirement where my user wants to enter the date format in the master inspection characteristic. For example we want to add date of manufacture and the date of expiree as a inspection characteristics and during the results recording they want to enter this characteristics in a date format.
MY question is can we have a master inspection characteristic with a date format, if so what all the settings are required.
Please suggest.
Thanks,
Quantum.>
quantum wrote:
>Can i use characteristics in the inspection plan instead of the master inspection characteristics. I am using Work bench transaction code CWBQM to create an inspection plan.
Direct characteristic you can't use in inspection plan. If you want to use characteristic in IP then create chara. (CT04), then assign this charac. as class chanr.(QS21) in MIC. Now you can use this MIC in inspection plan.
Hope this helps.
Thanks!!! -
Add inspection characteristics to production order created via CO07
Hi, all.
We're creating production orders to perform production rework on assemblies using transaction CO07.
We have a requirement to inspect and make a usage decision on the reworked assembly.
Since there is no material at the header level for CO07 orders, the system isn't allowing us to do an inspection because it has no material master QA view to reference. Although the control key is marked for in-process inspection, the production order still won't allow it.
I can't add "unplanned inspection characteristics", not can I manually create an inspection lot using QA01.
Is there a way to manually force in an inspection for an operation on a CO07 order?
Thanks.
SarahHi,
We cannot do a inspection for a production order unless it has material assigned to it and the material got QM inspection type relevant to that.
regards,
Lenin. A -
LSMW to Load - Equipment Task List/Operations/Inspection Characteristics
Hello Experts,
Any suggestions on standard LSMW load program for this. The Standard batch Input - 0470/IBIP program does not have the option to load Maintenance Package and Inspection characteristics.
Any other suggestions please.
ThanksHi Ananthram,
instead of using the standard batch input program, you could also create a new recording that performs exactly the tasks you need. Mark "Batch-input-recording" and click on Overview. From there, you can start recording your transactions.
I hope this helps and solves your issue.
Marc -
Create Inspection Characteristics
Hello Gurus,
I'm developing a program to create Inspection Characteristics from a file (excel).
I'm using the BAPI <b>BAPI_INSPECTIONPLAN_CREATE</b> but i don't know how to fill the parameters.
Anyone can help me, please.
Thank in advance.Kindly go to SE37.Enter the name of BAPI n then execute.
Click on each field coming and execute. This was you can test your inputs. You can also save your test data .
This will validate that ur BAPI is o.k n you can ask you Technical team to write a program n assign a transaction to it. -
QM Inspection Characteristics table
Hi,
I am designing Inspection Report for QM Module, the thing is i am unable to find the tables for the data
1. Characteristic Specifications
2. Characteristic Results
like Characteristic Related complete data. And also can any one tell me what is the relation between Operation & Charaterisitics in the Inspection Processing?
Like the table used for that !!
Waiting for ur reply....
Regards,
SrinathHi,
Following is the list of related tables.
QALS - Inspection lot record : This is the table where you can get all the inspection lot numbers
QAMV - Characteristic specifications for inspection processing
QAMR - Characteristic results during inspection processing
QASR - Sample results for inspection characteristics
QASE - Results table for the sample unit
QASE and QASR give the results for individual samples and partial samples
To get the operation for the particular characteristic, call function module QEEA_READ_SINGLE_OPERATION
Pass AUFPL from QALS, VORGLFNR from QAMR and PRUEFLOS from QAMR to the function module as shown below.
The FM returns the value of operation VORNR in structure e_qapo.
call function 'QEEA_READ_SINGLE_OPERATION'
exporting
i_aufpl = <fs_qals>-aufpl
i_plnkn = <fs_qamr>-vorglfnr
i_prueflos = <fs_qamr>-prueflos
importing
e_qapo_wa = e_qapo
exceptions
not_found = 1
others = 2
Hope you'll find this useful.
Regards
Radhika -
Config settings for Decimal places in Master Inspection Characteristics
Hi,
can any body tell me where to do the configuration settings for decimal places in master inspection characteristics
i want my limits to be 1.234
i want 3 decimals after point
Regards,
RajHi,
Please go through the below link.
http://www.freesaptutorial.com/how-to-create-master-inspection-characteristic-in-sap-qm-module/
While creating the MIC in QS21 after entering the control indicators you will get Quantitative data screen.
In that screen you can enter the decimal places, UOM, target, lower limits etc
Regards
Hari -
Related to Inspection Characteristics load issue
Hi All,
I am trying to load inspection charatceristics - please see my requirement below
Can we use the standard SAP program for Equipment Task lists to load the Inspection Characteristics associated with the Operations?
Transaction (IA01)
The program works fine for Header and Operations (One to Many, PLKO to PLPO) but does not have a separate structure for PLMK (Inspection Characteristics) but has a structure IBIPBDCD to use.
What we're trying to achieve basically is One Header, Many Operations each having many Inspection Characteristics
Also,
In the current state the program can add one Inspection Characteristic to the First operation, is it possible to add "BDC Commands" to the file in such a way to
1. "Position on particular" operation (i.e. Position Cursor and select line on screen SAPLCPDI 3400 where PLPOD-VORNR = 'xxxx')?
2. Go back to the operations screen (i.e. SAPLCPDI 3400) at the end of each Inspection Characteristic entry in order to be able to position on either the same operation to add an Inspection characteristic or to position on a different operation (not necessarily the next one)
Could you please help me with this issue?It is possible, Get help from ABAP.
Thanks & Rgards
Rajendran -
Can anybody send the function module to read inspection characteristics ?
Hi friends
can anybody send the function module to read inspection characteristics ?
(rate routings).
thanks in advanceHi,
Use the BAPI,
<b>BAPI_INSPCHAR_GETRESULT</b> to get the deatils.
also look at this BAPI <b>BAPI_INSPOPER_GETCHAR</b>
Regards
Sudheer
Message was edited by:
Sudheer Junnuthula -
Inprocess inspection characteristics missing
Dear all
i assigned 03 inspection to a material but forgot to assign inspection characteristics, lot has been created at the time of the creation of production order. now i want to do the inspection but there is no assigned characteristics. i have assigned characteristics to that material in routing but how to get the effect on that lot to get the characteristics without changing order
is there any option plz guide meDear Nasir,
You have to try to read the Production Order master data through Production Order --> Functions --> Read Master Data. This is the way you can reset your lot Because In process inspection lot is attached with Production / Process Order. Other wise cancel the production order and create the new one. I hope this will work.
Best Regards,
Ibne Khalil -
Link between PRT and inspection characteristics in Rate Routing
I am creating an Z report to show the details of the PRT and the inspection carried out by the same.(inspection characteristics)
Suggest me any table link between two.got the solution
-
List of Articles by Inspection Characteristics
Hello,
How can i get list of articles by an inspection characteristics?
is there a transaction?
ThanksHi
You can use Engineering Workbench also. T-code CQBQM also.
Thanks
Manish -
Error in BAPI_ROUTING_CREATE about Selected Set of Inspection Characteristics
hi,all
When I use 'BAPI_ROUTING_CREATE' to batch import Routings , I come across a problem that the Selected Set of Inspection Characteristics can not be imported,and it's not updateable.
Here are the parameters I imported to the BAPI about the Inspection Characteristics.
activity
operation_id
cha_master_import_modus = 'N'
mstr_char
inspchar = '0010'..
valid_from = sy-datum.
valid_to_date = '99991231'.
char_descr
pmethod
smpl_unit
smpl_quant
quantitative_ind
smpl_procedure
SAMPLING_PROCEDURE_IND
pmstr_char
SEL_SET1
PSEL_SET1
CAT_TYPE2
Can anybody help,thanks in advance.Its nice to Ask question & then close it saying you find the answer, will you please take some time to Explain what was the solustion of your problem ? Thanks.
This is a trend i see in SDN, Moderator please request the members to put solustion in before closing the question as answered This will save lot time of others who are searching answare to same questions.
Maybe you are looking for
-
How can I play my windows-based itunes library on an imac?
Does anyone know of a way that I can transfer my windows-based itunes library to my new imac?
-
FullScreen problem with MovieClipLoader
Hi and thanks very very much for reading. My problem is: When I load a .swf via MovieClipLoader in ActionScript 2 -- Stage["fullScreen"] no longer works. I am stuck in "normal" for the Stage. If I run the loaded SWF without the preloader, then eve
-
We look now for a suitable condition type "deposit for loaned packaging"
Hi, Following is my client reuirement, We buy a lot of raw materials in loaned packaging (drums or IBC). The vendors are invoicing the packaging as an extra item on their invoice. Weeks or months later when we return the packaging to them
-
Hi, I configured 2-node RAC on Linux .But bench marks are surprising me.If i test the RAC with Loadbalace i'm getting 170 Transactions/sec.But,If i test the RAC with Single instance i'm getting 270 Transactions/sec.Could any one help me to solve this
-
Hello guys, I have some from used to insert data (including a Date) into some table, every thing is fine and I can query the data using that date from the form. Any way, if I performed a query at that table from SQL*Plus for example with this conditi