Development Component not visible in dev config, but visible in DTR,CBS

Hi,
we have recently migrated our production track from netweaver 2004 to 2004s. In the Dev Config perspective I am unable to see a DC, but I am able to see the same from the DTR perspective. I am also able to see this DC in CBS.
I am unable to create a project or work on this DC because of this problem.
Has anyone else faced the same problem ? What can be done to make the DC visible in the Dev Config ?
Thanks in advance for your help.
Warm regards,
Rashmi

Hi Dao,
Thanks again for your reply.
Here are the findings :
1)The DC is not available in both the active and inactive tabs in the Dev config perspetive.
2) I have only NWDS 7.0 on my machine, but Admin has the older version 6.4 and it was not visible on their machine.
3) I tried Re-Synching the archives, but still no luck, the DC is still invisible.
4)The DC was last modified during the creation of the new track, the activities making changes to the DC before that are mostly UI changes, no deletes etc.. which could cause the DC to not be visible.
5) It is a WD DC.
6) The DC exists in Cons/Dev (both active/inactive) DTR workspaces as well as CBS build spaces (on both versions of the track)
7)There are no pending activities for this DC in the old track.
8)There were couple of broken DCs on the new track but this is mainly because of compile time errors due to use of deprecated methods.
While checking for all these items I noticed that the .dcref file for the DC is missing in the DTR for both active and inactive, could this mean anything ? Is this the reason for the DC not being visible in the Dev Config perspective ?
Is there any way to recover the DC ?
Thanks in advance for your help.
Warm regards,
Rashmi

Similar Messages

Development Component not visible in the Consolidation Compartment in CBS

Hi Experts,
We have created a new development component on the track for which we
have created an DTR activity. After we checked in, activated & released
the activity successfully, we went to the consolidation tab in CMS and
imported the activity. We could successfully imported the activity into
consolidation system and got the message import finished. But when I checked
in the Consolidation compartment, I could not found out my newly
created Development component. I feel that the activities are not going there.
I also tried restarting the NWDI server but still no luck.
Kindly assist as without solving this issue we cannot assemble our
components and cannot move them to Quality environment.
Also, kindly assist how can we transport the entire SCA (where we have done the custom development) from development
to Consolidation for the same state?
Currently, we have lesser number of DCs in the SCA of my cons environment than my dev environment, so how can I exactly have the same state of custom developed SCA in my cons environment?
Is there any provision of system restore so that we can overcome the above issue or any other means by which we can move the entire SCA from my dev environment to cons environment.
Please suggest as this is affecting our go live activities.
Thanks & Regards,
Anurag

Hi,
when you have imported into cons and it said finished succesfully, then clicking on the button "Details..." can you confirm that all the 3 phases were succesful (dtr import, cbs make and deployment) ?
Do you have any pending activations? You can check it in the CBS webui -- page "Activities".
Can you see any requests in the TCS deployer as described by Pramod ? (you need to look for numbers in square brackets [ ]. If there are any it means that those requests are still being deployed. If this is the case and the requests are not disappearing from the TCS Deployer, then doublecheck if the RTS settings for CONS are ok. Here a hint for that: http://wiki.sdn.sap.com/wiki/display/TechTSG/%28NWDI%29%28CMS%29Q0002).
Eventually if all this is fine, can you please trigger an Initialize Compartment (you do this in CBS webui -- select your CONS compartment).
I hope this helps.
Thanks and Regards,
Ervin

Phone not registered with dev acc, but it is..

Hi Guys,
I just updated my phone to IOS6 BETA, but i forgot to put my phone in the dev device list. Now im getting this weird error saying that my phone is not registered. But it is, i did this after i ran the first setup.
Anyone any tips?

Same here, but I have the new IPAD 4g.
the error:
"We're unable to complete your activation"
"the device is not registered as part of the iPhone developer program".
Message was edited by: amirbaro

File not showing in SharePoint (IE) but visible in Explorer

I have a document library that has a single file not showing up that I can't seem to track down. I am hoping someone here might be able to offer something I haven't thought of.
The document library is very much 'stock'. Verisioning is turned on and minor revisions aren't viewable to folks without edit rights. I am the admin with full control to everything - as is the user this initially impacted. The file will show
in the Explorer view - but isn't viewable in an 'all files' file via the browser or when attempting to open via Excel. If we provide the full path/file it does open successfully in Excel and offer the Check Out option - but it won't show up
in the 'File Open' dialog.
I thought at first it might be a matter of not having a version checked in - but it isn't showing under "Manage files which have no checked in version" menu. I've gone through the various SharePoint view options and can't find anything there either.
What would make a single Excel file in such an ordinary document library not be visible to users with full control rights? We have roughly 80k files stored in SharePoint overall - so please don't read this as being our initial test of SharePoint.
I'd really appreciate any ideas...
-Troy

Just to add a few more details. I have been able to add the file to a different library and they uploaded fine. The library in question is created off of a template and has 2 metadata fields. The fields are also being used in the other library, but that
was created from a different template.
The site and initial 4 libraries were created from a site template and then the library was added from a different library template. Checking ULS logs now, but doubtful I will find anything.

Message content not visible in Outlook&OWa but visible in smartphone

Hello,
We experienced very strange issue last time.
One user received properly message on the smartphone and also in Outlook 2007 client, but the thing is that message content (internal text) is visible only on phone and there is blank message in Outlook. Message was sent to user from external sender.
I've tried to view this message in Owa but with the same result.
Also i've recreated Outlook windows& outlook profile but without success.
At the end i've opened this message via MFC MAPI tool and checked attribute "PR_BODY,PR_BODY_A,ptagBODY" where usually there is some internal text message but there is also empty space.
Can you please give me advice where to look further ?
Thank you in advance

Hi MacKrk,
Sorry for the late reply.
Found an article for your reference:
Change the message format to HTML, Rich Text Format, or plain text
http://office.microsoft.com/en-001/outlook-help/change-the-message-format-to-html-rich-text-format-or-plain-text-HA102749169.aspx
Hope it is helpful
Thanks
Mavis
Mavis Huang
TechNet Community Support

Report Generation working on Dev machine but not on Deployment + Lessons learned

I don't do deployments very often with Teststand. But I have to say, I learned a lot from this one from trial and error and help from the message board. I have got my deployment to final work (almost) with these lessons learned:
1. Create a base installer for the engines and drivers, that way if you need to update it is much smaller.
2. Dont install Teststand before Labview on a new development machine (not related to this deployment but I did learn that)
3. Don't have your Testexec window open, alter the Station Globals, then close the window. It just puts them back to the old version (probably my biggest problem).
4. Paths are extemely important.
I think I have figured it out with much time involved and kept notes of what I have done for future. The ONLY issue I have left is this below. My dev machine works as it should but when I deploy, it does not. FYI- I manually copied over Station Globals, Process model, and Testexec. DO I need something else?
I create serial numbers for my UUT's in the proceses model. It all works fine in development. The serial numbers are generated and the UUT filename is titled [023232232].txt and changes per unit. The path for example lets say is C:\Users\Ryan\Desktop\temp. A logfile is generated for each and put in that folder.
When I deploy, it does something different. Instead of putting the files into the temp folder, it errors out saying it is in use. If I delete the temp folder, it creates a file called "temp" which contains my text logfile. This file just keeps getting overwritten.
Any ideas on this?

Hi SimpleJack,
One way you can ensure that the Report Options you want to have stay with your sequence file is to actually override them using a Sequence File Callback. I have attached a link to a KnowledgeBase article that walks you through how to add the ReportOptions callback to your sequence and programmatically set the options that you would normally set by going to Configure»Report Options from the Sequence Editor.
Also, to ensure that the correct Process Model is being used with your sequence file after distributing, you can set the Process Model within the Sequence File Properties. This can be found by going to Edit»Sequence File Properties, and then going to the Advanced tab. I have attached a screenshot of this window below, as well. From here, you can set the Model Option to Require Specific Model, which especially comes in handy if you are using your own custom Process Models.
I hope this helps, SimpleJack! Have a great day!
How Can I Programmatically Enable or Disable Database Logging or Report Generation?
Taylor G.
Product Support Engineer
National Instruments
www.ni.com/support

BPM process and BRM rules process in same development component in NWDS

Hi All,
Is it possible to create the BPM process and BRM rules process in the same development component in NWDS?
I tried but whenever we create it,say,first ly for BPM,that is File-New-Project-Development Component-Process Composer
While once this development component is created I try to create rules composer in the same composer by right clicking on local development component as well as process composer but ther is no option of creating /calling rules composer/rules modeling.
Can you please guide me creating both BPM process and BRM rules composer/rules modeling in the same development component if its possible?
Thanks in advance

Open your project explorer and expand the BPM project you have created. Locate a folder named "Rules" in the Project Tree. Right-click on the Rules folder and select 'Create new rule'. You can model your rules such as rule-scripts here and use it in the BPM.
Note: These rules cannot be used outside the BPM Project.

Development Component libraries not being recognized in Portal

Hi everyone,
I've been having a problem regarding a Background Execution Callable Object.
At first, when I added External Libraries to the Java Build Path of the Development Component, these libraries would dissappear upon build time. The solution to this was to create another DC type External Library and add the libraries there. Afterwards, these libraries would form part the DC's Public Part and these would be incorporated in the Used DC's section of the first component (marking Design Time and Build Time when it was added). This enabled me to build and deploy the DC successfully.
Once inside the Portal, I tried creating a new Background Execution Callable Object and once I entered the class' name, I would get the following error message:
Cannot check if class exists: Unable to load the required classes.
I had already created a CO pointing to this reference and when I test it, I get the following error message:
java.lang.NoClassDefFoundError: com/cts/speed/exception/DatabaseException
This leads me to the conclusion that the external libraries used aren't being recognized by the portal at runtime.
I would appreciate any suggestions as to how I can solve this issue.
Thank you very much,
Luis

Successful compilation or building in the eclipse/NWDS does not mean that it can be successfully deployed on the portal. If the Java build path has all the required jars, any project compiles and builts fine but that build path is not transported to the portal( see inside any par file, there won't be any .classpath and .project files. They are local only files).
========
Add all your third party jar files to the component in this path( ..\dist\PORTAL-INF\lib). There is no need to add mail.jar as it's already available in sap j2ee engine. So add these lines to the portalapp.xml. (as told by jagdeep)
<application-config>
<property name="PrivateSharingReference" value="SAPJ2EE::library:mail"/>
</application-config>
Regs,
Bobby

Software Component does not support selected Development Component Type...

Hi,
I have a problem, i want create a new project of Mobile Service Component, but, when i want select MyComponents [demo.sap.com], in the top appear:
"Software Component does not support selected Development Component Type. Required DCs are located in an SC that is not visible from the selected SC "
Why?
Thanks in advance,
Regards,

Hi Victor,
the issue is that the archive pool in your NWDS is not set up properly. Could you check the configuration of the development configuration? I guess you are developing in Local Development, right? Please check in the "Component Browser" that the two Software Components "NWMCLIENT" and "XOCA" are present and contain some DCs inside them. If this is not true, than something went wrong with your setup of the IDE. The modifications of the default.confdef are most likely not right.
Please come back to me if you don´t know how to proceed.
Regards,
Stefan

Photoshop starts on dev PC, but not anywhere else

Hello all,
I am developing a Photoshop plug-in, and it runs ok on my development PC. However, when I try to test the plug-in on other PCs, it does not even appear in the Filter list?!
To install it, I did the same thing I did on my development PC, i.e. creating a directory in the Plug-in folder, and copy the plugin in there. Works ok in the dev PC, but not anywhere else?! Any idea why that could be the case? Is it possible to make Photoshop generate a log of some kind to get more info on the problem?
Thanks in advance
Alex

Hi Toby Thain
Could you please show me a hint for a problem from Photoshop Plug-In ?
How I can create a Photoshop Plug-in by using C Carbon on Macintosh OS?
You can contact me via mail: [email protected]
[email protected]
Thanks for your attention
ThuongDN

Save Report * visible in "develop" and not in "test" environment

Hello,
The "Save Report*" option of a interactive report is visible in the development environment and not in the test environment.
Same user, Search Bar is visible and other items to, but the "Save Report*" is missing.
Rob
Update: Even stranger, in a different application "Save Report*" is not selected, but visible....?
Edited by: Rob-v-M-Gn-Nl on 16-jul-2012 2:42

Hello,
The "Save Report*" option of a interactive report is visible in the development environment and not in the test environment.
Same user, Search Bar is visible and other items to, but the "Save Report*" is missing.
Rob
Update: Even stranger, in a different application "Save Report*" is not selected, but visible....?
Edited by: Rob-v-M-Gn-Nl on 16-jul-2012 2:42

I'm developing a web site using MVC3 & Razor, but my css changes do not show up on FireFox, but do on Chrome & Internet Explorer - How can I get Razor to render correctly on FireFox?

I don't have a public version as I'm just staring development.
For an example I have completed the walk-thru at [http://www.asp.net/mvc/tutorials/getting-started-with-ef-using-mvc/updating-related-data-with-the-entity-framework-in-an-asp-net-mvc-application]. Then I tried changing minor items in site.css (such as font size) and the changes did not show up on FireFox, but do show up on Chrome and Internet Explorer.
Example of change below: I changed the background from #e8eef4 to #ff0000. The table header background shows up in red for chrome & IE, but stay in light blue for FireFox.
<code>
table th {
padding: 6px 5px;
text-align: right;
background-color: #ff0000;
border: solid 1px #e8eef4;
</code>

You can also reload web page(s) and bypass the cache.
*Press and hold Shift and left-click the Reload button.
*Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
*Press "Cmd + Shift + R" (MAC)

Report visible for one user but not for other user

Hi all,
We have a situation where a report is visible to one user but not to some other user. What could be the possible explanation for this? Please let me know.
I need quick responses.
Thanks in advance,
Sananda

Hi Sananda,
Just assign the saem roles as the other user who can view ..
You can inform the Auth/basis team and they shud be able to do this..
The T Code is RSECADMIN>user Tab>Assignment>user.Display and BView the roles here..
or goto SU01 and check for the Roles Tab.....
The New user must have the same roles as that of the other..
Rgds
SVU123
Edited by: svu123 on Sep 22, 2010 7:14 AM

New folder is not visible inside my project but shows in Windows Explorer.

I created a new folder under another folder. The new folder is not visible inside my project but shows in Windows Explorer. Also, if I try to add another folder of that same name, it denies the action since the folder (although invisible) already exists. My co-worker can access the same file (on a share drive) and see the new folder just fine. This error occurs whether I was the one creating the new folder or she is the one creating the new folder. I am new to RoboHelp and she has used it for years. I suspect something is not yet set up right on my side. Ideas? (I thought I posted this yesterday but I can't find it anywhere)

Hi there
What version of RoboHelp are you using?
Did you create the folder from inside RoboHelp or did you create it using Windows Explorer?
Cheers... Rick

I am trying to set up my newly purchased Apple TV but when I enter my network password while setting up, I am not able to enter the Submit button, any idea how to hit the visible submit button that is visible on screen but not responding?

I am trying to set up my newly purchased Apple TV but when I enter my network password while setting up, I am not able to enter the Submit button, any idea how to hit the visible submit button that is visible on screen but not responding?

You need to use the right arrow on the remote to go all the way to the right. The submit button will be highlighted and you can then press select on the remote to proceed.

Development Component not visible in dev config, but visible in DTR,CBS

Similar Messages

Maybe you are looking for