Device was removed wrong
My firewire hard drive was removed from my g5 2.66 intel . 10.5.8 wrong and now I'm getting this (Device message ). As a result my computer will not shut down or restart. Also I just loaded final cut pro . I was operating pro tool at the time
It isn't clear that all or any of the things you mention in your post are actually related to one another, but I'd suggest that you reconnect the FireWire drive, see whether the Mac can still detect it, and if so, eject it properly before disconnecting it again. Then see whether the machine will restart or shut down. If it still won't, the FireWire drive probably isn't part of the problem.
Did you finish the FCP installation successfully? If so, quit the installer and the FCP application, and also quit ProTools, before shutting down or restarting.
Similar Messages
-
TS4006 what if device was removed in error after device was lost or stolen
how can i find my ipad after it has been lost or stolen and i removed device in error while trying to locate. now im getting a message that device needs to be setup. when i try to locate in find my device.
Hey there @ArielF , Welcome to the forums!
I read your excellent and detailed post about the error "The HP imaging device was not found" you are seeing when trying to set up your Officejet J6480 on your Windows 8.1 system, and the steps you have taken in order to resolve the problem.
My suggestion would be for you to try these steps from this link below. Please respond to me when you are done and let me know what happened and the results!
A 'The HP imaging device was not found on the network' Message Displays for HP All-in-One printers
I really hope this helps, and look forward to hearing from you!
R a i n b o w 7000I work on behalf of HP
Click the “Kudos Thumbs Up" at the bottom of this post to say
“Thanks” for helping!
Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution! -
The iCloud was never verified therefore never backing up anything on my iphone 4s because it was the wrong email and now I'm trying to make a new one but it says if I delete the account it will remove it's data from my phone. So if I put delete account will I lose everything on my Iphone?
This was EXACTLY what I needed about the purchases I made from my device. However, is there a way to re-download other ones you've made from a computer? Because I realized some of them were not just purchased from my device.
This is a picture of what it looks like now:
http://tinypic.com/r/107quxu/7
As you can see, the stuff circled in red doesn't give me an option to download from Cloud Beta because it already says "downloaded".
any way to get around that? -
I have an olde iMac that once I have an older iMAC that once burned CD's with no issues. Now I get an error message saying "The attempt to burn a disc failed. The device is not accessible, probably because it was removed". I have never had it touched so the device was not removed. Please advise as to what could be the problem. How to fix. Thanks
Try resetting the SMC and PRAM first, if that doesn't help try a cleaning disc.....and then buy an inexpensive external burner. Slimline super drive failures are all too common.
To reset the SMC
Shut down the computer.
Unplug the computer's power cord.
Wait fifteen seconds.
Attach the computer's power cord.
Wait five seconds, then press the power button to turn on the computer.
Resetting NVRAM / PRAM
Shut down your Mac.
Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys. -
I purchased an external CD drive for my MacBook,the internaldrive had died. When I tried using the new drive I got the following msg "The attempt to burn a disc failed. The device is not accessable, probably because it was removed" I contacted OWC and tried to work the issue with them, we gave up and OWC sent me a replacement. I connected the replacement and am getting the same message. Any thoughts?
Try resetting the SMC and PRAM first, if that doesn't help try a cleaning disc.....and then buy an inexpensive external burner. Slimline super drive failures are all too common.
To reset the SMC
Shut down the computer.
Unplug the computer's power cord.
Wait fifteen seconds.
Attach the computer's power cord.
Wait five seconds, then press the power button to turn on the computer.
Resetting NVRAM / PRAM
Shut down your Mac.
Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys. -
One of my authorized devices was erased. I downloaded iTunes. Says my iPod is already synced to a library. It will allow me transfer purchased songs but not songs I had that were downloaded off of my CD's. Where do I access that library and how do i get it back on iTunes? I tried manually move songs in disk mode. Now I have a bunch of data on ipod and I don't know how to remove it. It basically copied all my itunes files from my C drive onto ipod in my efforts to move the library.
When I use find file http://www.macupdate.com/app/mac/30073/find-file (which does tend to find files that "Finder" can't), it's not coming up with any other itunes library files that have been modified in the past week, which I know it would have been - unfortunately, I don't have a very recent backup of the hard drive. It would be a few months old so it wouldn't have the complete library on it....any ideas? I'm wondering if restarting the computer might help but have been afraid to do so in case it would make it harder to recover anything...I was looking at this thread https://discussions.apple.com/thread/4211589?start=0&tstart=0 in the hopes that it might have a helpful suggestion but it's definitely a different scenario.
-
hello guys! i just wanted to asked to anyone of you if you'll receive a notification when your icloud account was removed into your apple device? my iphone 4 Ios7 was stole 3 days before.. please help thank you!
1. you may have to take it in to Apple and get an out of warranty iphone for $199.
2. you can get your information from a backup of your phone. you do have a backup of your phone right either in iTunes or icloud. If you don't then your answer will be no. -
the application is working good, but the location of my device has found was totally wrong. any idea?
That would be the issue here.
The gateway is a modem/router that is in charge of your network.
The AirPort sensed this during setup and configured itself to operate correctly and passively with an "upstream" router on the network.....so, the Airport is in Bridge Mode.
The upside is that the AirPort is configured correctly to work with your gateway. The downside.....and Catch 22....is that the Guest Network will not operate correctly when the AirPort is in Bridge Mode.
The AirPort has to be the router "in charge" in order for the Guest Network feature to work correctly.
If you want to try to break some basic networking rules, and have two devices both trying to perform routing chores on the network, that might be a workaround. But, things get complicated to set this up.....and it will produce what is known as a Double NAT error on the network......which may allows things to work OK....or....cause problems.
Double NAT errors are unpredictable. It will be one of those things where you will not know if things will work until you try. No guarantees possible.
The network will have to be completely redone if you want to try this, and you will have to set up new Static IP addresses for devices that need them.
In general, if you want to try this, the network layout must look like this:
Internet Connection > SMC Gateway > AirPort Express > Ethernet Switch > Devices.
With things set up the way that they are now......the simpler thing to do would be to use the SMC wireless for your "main" network and the AirPort Express wireless for "guests".
The downside....."guests" will be able to "see" devices on your "main" network with this type of setup. -
How could it happen that there was a wrong FIRMWARE on the HP side?
Hey,
I've bought a HP LaserJet Pro 200 color MFP M276nw.
I checked for a new firmware
1.
downloaded the latest one: M270_colorMFP_Series_FW_Update-20140718.exe
2.
I started the exe file while working in a WiFi NETWORK
2.1 - chose the printer
2.2 - got a SMILE
2.3 - checked the system info: FAILED: old FIRMWARE 20121026
Printer firmware update failed, nothing happened.
3.
I started the exe file while working in a WiFi NETWORK
3.1 - chose the printer
and after a quarter of the installation I saw an "error 65" displayed on the printer screen
3.2 - but still got a SMILE at the end
3.3 - checked the system info: OLD FIRMWARE 20121026
Printer firmware update FAILED, nothing happened.
4.
I started the next try with USB connection
4.1 - chose the printer
and after a quarter of the installation I saw "BLACK printer screen"
4.2 - but at the end I still got a SMILE from the laptop Software
4.3 - checked the system info: OLD FIRMWARE 20121026
Printer firmware update FAILED, nothing happened.
5.
Meanwhile I had searched the web for "error 65" and found a disussion 2 few weeks ago, where there was metioned that error 65 displayed on the printer screen.
There was mentioned that the downloaded firmware was wrong and that there should have been only one firmware on the website and that the latest was wrong, "20140521" should be the only one.
I started the next try with USB connection and that bigger "20140521" exe file
5.1 - chose the printer
5.2 - then I saw something like "programming" what sounded somehow better
5.3 - the display went again black while the app on the laptop was still running
5.4 - again there was a "programming" screen displayed
5.5 - the display went again black
5.6 - but then the printer rebooted while the app was still running .
5.7 - a few moments later the laptop firmware app was done and the SMILE came back
5.8 - checked the system info: NEW FIRMWARE
AFTER ALL IT TOOK ME MORE THAN 4 HOURS just to update that FIRMWARE.
I still don't know if that firmware is fixing my problem of backing up and restoring Printer Configurations.
I don't like the fact that it seems that I am not able to save the complete configuration or at least each configuration segment like it should be possible for the "eMail Adressbook"
There is much more work to be done inside each network configuration (Networkname, Fileprefix, Format, resolution, ...),. Therefore it would be very useful to have a backup especially if you have to exchange units .
Why isn't this backup feature available for FAX Adresses & Network Buttons?
HOW COULD IT HAPPEN THAT THERE WAS A WRONG FIRMWARE ON THE OFFICIAL HP SIDE?
HOW CAN IT BE THAT EVEN THE SUCCESSFULL FIRMWARE UPDATE PROCESS WAS THE TOTAL OPPOSITE OF something you would call smooth?
There was no message on the PC telling something about what was going on on the HP 200 printer, the programming, black displays, reboot and nothing was synchronized between the firmware app and the printer display.
The TCO of this unit have exploded for this tiny firmware update I had done before on other equipment over 15 years.
I can't believe that the app is state of the art and that the quality assurance is on the right track if there is a wrong firmware on HP's website.
I am really unsatisfied and still hope, that the firmware update will deliver a better success than I had the whole eveing.
WOLFHey,
so after 3 month nothing has been cleared.
I got several phone calls from a terribly bad german speaking support center (may be polish orign) agent , therefore I could not understand her easily and she had no technical expertise or skills. I answered all her questions.
Later I got a support eMail in german where she was speaking about an "ELIVIERUNGSTEAM"
That is an in german unknown word probably she meant "EVALUIERUNGSTEAM" which means EVALUATION TEAM.
So I got that answer from that TEAM in late December 2014 and replied after christmas.
I received an eMail that HP received my answer but nothing happened until today.
We have several devices with the same issues and I do not want to hear or read that HP tries to tell me that it is my problem. It is an problem which occured under each browser they asked me to perform the steps - chrome, firefox, ie ...
And it occures on all printers of that series and on all laptops.
HERE IS THE LAST MESSAGE WHICH ANNOUNCED A REPLACEMENT BUT I AM STILL WAITING
HERE IS THAT MESSAGE:
Antwort unserer Elevierung [ ref:_00DG0h8qk._500G0bDLRI:ref ]
Sehr geehrter Herr Bxxxxxxxxxxxxxx,
anbei die Originalantwort unseres Elevierungsteams. Sollten Sie eine deutsche Übersetzung benötigen, so bitten wir um Rückmeldung:
Thank you for the escalation. We are able to save the email as well as fax phone book and restore it. The files saved are in .csv format. As for the firmware on the website, we are looking into it on a priority basis, as a number of product firmware listed are incorrect. We expect the error to be rectified soon, I shall keep you updated. If the customer has tried updating the printer firmware and as a result of it he is having the issue, then please replace the printer for the customer and check for the issue.
With Regards
Ich hoffe Ihnen mit diesen Auskünften weitergeholfen zu haben.
Mit freundlichen Grüßen,
Ihr HP-Laserjet-Support
WHO IS RESPONSIBLE FOR THIS SUPPORT UNIT AND THAT WHOLE TASK ?
I NEED SOLUTIONS CAUSE HERE ARE SEVERAL MACHINES WITH ALL THESE PROBLEMS BECAUSE WE MADE THESE UPDATES OF THE HP FIRMWARE -
Ipod touch not being recognized by itunes (but is registering as an external drive by the computer itself) have updated and reinstalled itunes, stopped/started apple mobile device and removed any mobile programs associated with my non apple cellphone. This seems to have started happening after the last Itunes update I did as I was able to put music on my ipod touch a month or so ago. Is there some way to go back to an older version of itunes? I really have no idea what else to do since I followed every step on the trouble shooting page for windows 8.
I had this problem too and my roommate solved it!
Go to 'Settings'
'Music'
Scroll to the bottom and enter your password to log onto your home sharing
Then connect to iTunes and sync! -
Forbide - Mobile Removable Devices / Media Removable Devices
Hi everyone!
I have a problem about IT-security.
In our company we are using Windows 7 Professional/Enterprise Edition.
We could easily block/forbid using of Storage Devices such as Pen Drives, USB-Flash Drives, SD-Cards via USB port on a Software Level, but we couldn't block/forbid using of
Mobile Removable Devices / Media Removable Devices such as Mobile Phones, SmartPhones, Tablets, MP3 Plyaers!
When you connect SmartPhone to PC via USB cable, it is detected as Removable Device (NOT as a Storage Device!) and can be easily used for copying Information from PC.
The question is : "Is it possible to block/forbid Mobile Removable Devices / Media Removable Devices via USB on a Software level, without disable USB ports in BIOS?" Any solution(personal PC configuration or Group Policy) would be
great.
Hope for your help!
Thanks a lot in advance!Hi Aziz,
Before going further, sorry for the late response. I was on holiday on those days.
>>Is it possible to deny Mobile Removable Devices / Media Removable Devices by a group policy?
Yes, it is.
On a DC, create a new GPO or find an existing GPO. Then edit the setting in the GPO, and link the GPO to the target scope (site, domain, OU).
Note: if we configure the setting under Computer Configuration, it applies to computers,
regardless of who logs on to the computers. While if we configure the setting under User Configuration, it applies to users, regardless of which computer they log on to.
In addition, regarding how to create, edit, and link a GPO, the following articles can be referred to for more information.
Create and Edit a Group Policy Object
http://technet.microsoft.com/en-us/library/cc754740.aspx
Link a Group Policy Object
http://technet.microsoft.com/en-us/library/cc732979.aspx
Best regards,
Frank Shen -
got a iphone set the apple id n it was the wrong email address now i can't verifie it how do i delete and start over
Welcome to the Apple Community.
In order to change your Apple ID or password for your iCloud account on your iOS device, you need to delete the account from your iOS device first, then add it back using your updated details. (Settings > iCloud, scroll down and hit "Delete Account")
When you delete your account, all the data that is synced with iCloud will also be deleted from the device (but not from iCloud), but will be synced back to your device when you login again. -
My device was stolen and i want to know his place can you help me please
my device was stolen and i want to know his place can you help me please
but iam in syria
<Personal information removed by Host>thanks for you
but Why they did not give me a solution to my problem
Please help me because my car had been stolen and a telephone inside and I want to know my phone place in order to know where my car -
how to remove wrong apple id
Remove it or sign out of it? Go to Settings>iTunes & App Store>Apple ID. Tap the ID and sign out, then sign in with the correct ID,
If you are asking this question because you are being asked to provide what you believe is the wrong ID when you are trying to update apps, all purchases are tied to the ID that was used to make the purchase. Therefore, you have to use the same ID and password to update apps that was used to purchase them. -
I NEED HELP!! Been calling since the end of Nov and being charged for a Warranty device. The device was returned the next day!! Been calling twice a week.. I NEED HELP 6 TCC TICKETS HAVE BEEN OPENED - PROMISED CALLS BACK AND NEVER GET CALLS.
About to cancel my account and move to AT&T
TCC TICKETS: (removed)
I am trying here for the last resort. After this evening my account along with my business account will be cancelled. Total lines that Verizon will have lost will be 93 lines.
PLEASE SOMEONE JUST HELP ME!!!!
I already tweeted and facebook messaged Verizon. Your CS group has gone down hill over the last 3-6 months. I use to enjoy being a customer.
>> Edited to comply with the Verizon Wireless Terms of Service <<not all the lines have ETF's. I have 30 tablets and the rest phones. The phones have ETFs and the tablets are all month to month.
The total to move my account over is going to come out to about $8500.
Rep has been trying to get my business for years. I was always loyal to Verizon until this happened.
Maybe you are looking for
-
Hi Experts, I have a work flow requirement and would appreciate if you guys can please help me here . The actual requirement is to design a CUP Workflow and If there are SOD issues identified, the workflow will need to go to a central team for them t
-
I recently moved from a Gateway laptop w/ Windows XP to one of the new iMacs, and working on moving files, applications, and the like. I have Photoshop CS2 with .exe files for setup, which I know doesn't work on my new system. I've researched some on
-
Resetting master password at login?
Lately I've been noticing that when logging into our SnowLeopard miniserve after "fat-fingering" the password once, I am prompted to reset the Master Password. When doing this you are also informed that the keychain will be updated. Is there a system
-
Express document error in VF01 while doing individual billing
Hi, My Functional consultant is getting an "express document error" for the transaction VF01. I checked SM13 and its showing error message as " Error updating table J_1ipart2". How to resolve this issue ? We are getting express document error on
-
How do I install Moutain Lion Apple support said I could after they got my serial number. but evry time i try it comes back and say's cant download on this computer.