Difference between AAC, matched and purchased
To upgrade my Protected AAC audio files, I subscribed to iMatch. Through the iCloud dowload service, I was able to download (what I believe are) uprotected AAC audio files. However, Depending on the song, they got converted to any of the three different 'kind' of files:
- AAC audio file @ 128kpbs
- Matched AAC audio file @ 256kbps
- Purchased AAC audio file @ 256kbps
Some of the songs have not been converted and remained Protected.
Can anybody explain why these differend kinds occured and what their difference is (appart from the bit rate)?
Thanks in advance
Patrick
I copied this from about.com, hope it helps:
AAC audio file: This is a standard AAC (Advanced Audio Coding) file. Most likely, you created this file by converting an MP3 or ripping the song from CD using iTunes' built-in AAC encoder.
Matched AAC audio file: This is a standard AAC audio file, except that you downloaded it to your computer or iOS device from your iCloud account, using iTunes Match.
MPEG audio file: This is a standard MP3 file. You may have downloaded it from the web or ripped the song from a CD using iTunes' built-in MP3 encoder.
Protected AAC audio file: A protected AAC file was the default filetype for songs purchased from the iTunes Store prior to the introduction of the DRM-free iTunes Plus format in April 2009. It is noted as being protected because the DRM built into the file prevents it from being copied/shared beyond the iTunes account it's associated with.
Purchased AAC audio file: A purchased AAC file is what a protected AAC file becomes when it's been upgraded to the iTunes Plus format. This file was still purchased at the iTunes Store, but it no longer has the DRM-based copy restrictions. All songs at the iTunes Store sold after April 2009 are in the Purchased AAC audio file format.
Similar Messages
-
What is the exact difference between Purchse order and purchase requisition
Hi all,
What is the exact difference between Purchse order and purchase requisition.
ThxHi,
<b>Purchase Requisition</b>-> Staff in an orgn places Pur requisition for want of some goods/products - ME51
Related Table EBAN
Request for Quotation(RFQ)-> The Purchase dept in the orgn calls/requests for the quotation for the products against which PR was raised. - ME41
Vendor Evaluation->After receving the RFQ's, after comparison a Vendor is finalised based on the terms and conditions.
<b>Purchase Order(PO)</b>-> Pur order was issued to that vendor asking him to supply the goods/products -ME21N
Tables:EKKO,EKPO
Goods Receipt Note(GRN)->Vendor supplies the material/Products to the orgn-
MB01
Goods Issue (GI) -> People receives their respective itesm for which they have placed the Requisitions
Vendor, Material ,Qty are mandatory for PO.
Regards,
Padmam. -
Difference between IC Matching and IC Elimination
Hi all,
Can anyone please explain me the difference between IC matching and IC elimination. Do we generate records in IC Matching?
Please help,
Diskha,Hi Diksha,
In addition to the above information, would like to inform you that any inter-company elimination or allocation or matching, can only be executed when values from all entities have been entered (and translated into the reporting currency). It matches, allocates and removes the records which are doubled and which can influence the company transactions, records, calculations and analysis and lead to wrong generation of data.
Hope this helps.
Regards,
Poonam -
XFA Specification Question: What is the difference between ancestor match and sibling match
Hello.
Please, tell what is the main difference between ancestor scope match and sibling scope match during data binding process.
I've read "XML Forms Architecture (XFA) Specification Version 3.0" pages 182-188 a few times and tried to find the main difference, but I couldn't.They are very different, actually. Last.fm is essentially a tracking tool for your music plackback preferences. Plus it's a web portal / forum for many music-related discussions. It's cross-platform and thus very OS / device agnostic.
iTunes Match is a Matching service that takes your local music libaray (in iTunes) and "matches" them to whatever is in Apple's music database. So, if you have a lot of older 128kps files, the hope is that they will be upgraded to 256kps AAC's. And it's also a "cloud" solution for your music, allowing you to keep not only your iTunes systems in sync but also your iOS devices. But it's not cross-platform -- no Android support, no Linux support for example. -
Difference Between Sales Org and Purchasing Org
Hi,
What is the difference between a sales organisation and purchasing organisation?
Regards,
TracySales organization is responsible for selling the goods.
Purchasing organization is responsible for purchasing the raw material or goods for the company. -
Difference between PO line and purchase requisation
Hi all ,
i had conversion in which i need to upload purchase requisations from legacy and JDE to SRM.in processing logic thay give extract PO line from JDE then match with Legacy.
here i got doubt what is diffrence between PO line data and Purchase requistion,
<<text removed>>
Thanks & regards,
Bala.
Edited by: Matt on Dec 9, 2008 10:27 AM - Please do not use phrases such as "as soon as possible"hi ,
Thnks u for giving response,
actually my doubt is Diffrence between Purchase requistion and Po line.
for understanding i am giving some text below,
first thay given business requirement like this,
business requirement: We need to load all requisitions created in the existing Ariba system into SRM. The load should do the following
in processing logic thay have given like this.
Extract from JDE the PO Line. It should include the following fields:
PDKCOO - Order Company
PDDOCO - Order Number
PDDCTO - Order Type
PDLNID - Line Number (Divide by 1000)
PDVR01 - Reference
PDVR02 - Reference 2
PDAEXP - Extended Price (Convert to standard format u2013 add decimals)
PDAOPN - Amount Open (Convert to standard format u2013 add decimals)
PDCRCD - Currency Code
PDFEA - Foreign Extended Price (Convert to standard format u2013 add decimals)
PDFAP - Foreign Open Amount (Convert to standard format u2013 add decimals)
PDNXTR - Status Code - Next
PDLTTR - Status Code - Last
We will want to pull all the indirect POs created after July 1, 2006
3. We will then select the order company and number for all POs that have an Open Amount not equals to 0 AND that are not closed. These are the orders that we will load first. -
Difference between expense account and purchase account
Hi
I am using Purchase Account Posting System in a NON continuos stock company (sap 2007A).
I cannot understand very well when sap uses some accounts definied in account determination, in particular:
1) expense account in Purchasing tab
2) purchase account in Inventory tab
I know that purchase account is used in good receipt PO/AP invoices, but when is expense account used?
If a do not use Purchase Account Posting system, expense account is used in AP invoice ...
Thanks for your help
Serenahi serena,
answered in this link Re: usage of expense account
Jeyakanthan -
I have some albums that only a few tracks are recognized and others are not. The difference in the info is that the pc recognizes the tracks that say aac matched and not the ones that say aac file. how can I fix that. I have tried to creat new file but the message unknown error (-50) pops up. Also these files have played in the past
We usually advice first to Reload web page(s) and bypass the cache in case of such problem and then do a check for extensions to see if any are causing the problem.
* Press and hold Shift and left-click the Reload button.
* Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
* Press "Cmd + Shift + R" (MAC)
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode
*https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes
Other possible causes can be zooming a page or having increased the minimum font size.
*http://kb.mozillazine.org/Websites_look_wrong -
Difference between AAC and m4a files, converting from AAC to useable format
Does anyone know the difference between AAC and m4a files? iTunes has an option to use an AAC encoder to compress CD files, but this creates an m4a file not an AAC file. I just got some actual AAC files and iTunes cannot read these, is there a way to convert from AAC to a format that iTunes recognizes? Thanks
iTunes uses AAC data wrapped in an MPEG 4 container file. If you got some *.AAC files, and they're just raw AAC files, then you need to wrap them in an MPEG 4 container. The only way I know to do this is using the foobar 2000 program. You can find more information at http://www.hydrogenaudio.org and http://www.foobar2000.org
-
Purchasing - Difference Between Organisation Classification and type?
Hi All,
Whilst setting purchase organisation i was curious to know what is the difference between organisation type and organisation classification when creating organisation within Purchasing?
Any useful explanation will be welcomedHi Lavanya,
this choice boils down to the XML definition of Type an Element.
A type is not something concrete; meaning that it is merely a definition. You'll always need something of that type to put data in. In other words; if I only have a type, I'll need to create an element that is of that type in order to have something to work with.
For the messages it comes down to this: say, I've declared a type by the name of
<complexType name="arbitraryType">
<sequence>
<element name="contentGoesHere"/>
</sequence>
</complexType>
If I make the message of this type: it will look like this:
<MessageName>
<payload>
<contentGoesHere>
</payload>
</MessageName>
If I define an element as following:
<element name="arbitraryElement">
<complexType>
<sequence>
<element name="contentGoesHere"/>
</sequence>
</complexType>
</element>
and I put it in the message, it will look like this:
<MessageName>
<payload>
<arbitraryElement>
<contentGoesHere/>
</arbitraryElement>
</payload>
</MessageName>
Hope this clears up a little. Refer to w3.org for an exact definition of the two.
Cheers,
André -
Difference between Search Helps and Match Codes?
Difference between Search Helps and Match Codes?
Serch help
Search Helps
The input help (F4 help) is a standard function of the R/3 System. The user can display the list of all possible input values for a screen field with the input help. The possible input values can be enhanced with further information. This is meaningful especially when the field requires the input of a formal key.
Standard Input Help Process
A user calls an input help with the following steps (some steps can be omitted, depending on the definition of the input help):
The user starts the input help to display the possible input values for a field (search field) in a screen template.
The system offers the user a number of possible search paths. The user selects one of these search paths. Each search path offers a number of restrictions to limit the number of possible input values. These values are offered in a Dialog box for value restriction when the search path is selected.
The user enters restrictions if required and then starts the search.
The system determines the values that satisfy the entered restrictions (hits) and displays them as a list (hit list).
The user selects the most suitable line from the hit list by double-clicking.
The value of the search field is returned to the screen template (possibly together with other values).
Steps 2 and 3 are omitted if there is only a single search path available. In this case the dialog box for the value selection is offered immediately. You can also output the hit list directly after starting the input help. Steps 2 to 4 are omitted in this case.
Function of a Search Help
This standard process can be completely defined by creating a search help in the ABAP Dictionary. This search help only has to be assigned to the screen fields in which they should be available (see Attaching Search Helps to Screen Fields).
There are two types of search help:
Elementary search helps describe a search path. The elementary search help must define where the data of the hit list should be read from (selection method), how the exchange of values between the screen template and selection method is implemented (interface of the search help) and how the online input help should be defined (online behavior of the search help).
Collective search helps combine several elementary search helps. A collective search help thus can offer several alternative search paths.
See also:
Example for Search Helps
Creating Elementary Search Helps
Creating Collective Search Helps
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ee2b446011d189700000e8322d00/content.htm
http://help.sap.com/saphelp_46c/helpdata/en/cf/21ee2b446011d189700000e8322d00/frameset.htm
http://help.sap.com/saphelp_nw04/helpdata/en/cf/21ee2b446011d189700000e8322d00/content.htm
Match code
Match code is nothing but the Search help in Higher versions
It is same way from SE11 you have to create.
so from SE11 create it and use it.
Matchcode objects are being replaced by search helps. This is good as search helps are easy to create. However, it has caused some confusion on how best to add search helps to a selection field.
The trick that I found is to keep your newly created search helps to a 4-character name. The Matchcode object name has this old 4-character limit. This trick is not documented anywhere in the system but it has been a great time saver for me. You can expand this concept by finding existing SAP search helps that are more than 4-characters, copy them to a 4-character name and presto, you have a new matchcode object available for use
Check this thread to get detailed info
Match Code Objects
Match code
match code
match code
Match code
http://help.sap.com/saphelp_40b/helpdata/en/cf/21ef46446011d189700000e8322d00/content.htm
Rewards if useful.................
Minal
http://web.mit.edu/sapr3/docs/webdocs/dontindex/pdf/mcqc.pdf -
What is difference between air play and home sharing when wanting to show photos on HD tv through apple tv? Just bought Mac book air and apple tv.
You would have to use home-sharing if streaming from a computer. Computer would need to be on and running iTunes.
http://support.apple.com/kb/HT4352
Airplay would be useful if streaming from an IOS device
http://support.apple.com/kb/HT4437 -
What is the difference between scheduling agreement and delivery schedule
Hi
1. Can anyone explain me the difference between scheduling agreement output
and scheduling agreement delivey schedule
Will the both look same in T.code SP02 when seeing the output for a document.
Can anyone send me T.codes for above ones in purchasing.
2. when seeing the Detailed statement for rebate agreement,there is item number.
In which table can we see the item number for rebate agreementHi,
If you have to deal with more complex situations, you can define a delivery cycle in the material master record in addition to the planning cycle. In so doing, you determine the days on whichthe vendor delivers his goods. The delivery cycle is entered in the material master record as a planning calendar in the Planning calendar field.
You enter a delivery cycle if the delivery date (or the goods receipt date) depends on the day on which you order the goods. For example, you carry out the planning run and place your orders on Mondays and Tuesdays. If you place the order on Monday, the delivery is made on Wednesday, if you wait until Tuesday to place the order, the delivery is not made until Friday
Where as Planning calander is Three character number (numeric or using letters) that specifically identifies a PPS-planning calendar. The difference between Planning calender and delivery cycle is If you have selected the MRP type "MRP" and have set a period lot-sizing procedure according to planning calendar, you enter here which planning calendar is to be used.
If you selected the "time-phased planning" MRP type, the planning calendar that you specify here defines the delivery cycle. This specifies the days on which the vendor delivers the material. You can enter the planning cycle in addition to the delivery cycle -
Difference between shipping invoice and fiscal invoice?
Helo.
Can anyone tell me the difference between Shipping Invoice and Fiscal Invoice?
Regards
Points are assuredHi Kulkarni,
Invoice Processing
Process
You can use this business process to display and process invoices both in SAP Enterprise Buyer (SAP EBP) and SAP Supplier Self-Services (SAP SUS).
As supplier or service provider, all invoices that you enter or process in SAP Enterprise Buyer must be approved by a responsible internal employee. For goods and services with a low purchase value, invoices and credit memos can also be created without a purchase order reference. Moreover, it is also possible to create express invoices in the check status application.
In SAP Supplier Self-Services (SAP SUS) invoices can be entered with reference to a purchase order, shipping notification, or contact person before they are sent to the customer.
If, following a purchase order, the goods supplied or the service provided turn out to be defective or the price charged is too high, you as an internal employee, supplier, or service provider, can enter and process credit memos or subsequent debits/credits in SAP Enterprise Buyer
i think the invoice generated during a particular fiscal year is fiscal invoice.
thanks
sekjar -
Difference between Credit memo and subsequent credit
All SAP Gurus,
In MIRO, what is the difference between Credit memo and subsequent credit?
Regards,Difference between Credit memo and subsequent debits/credits
Subsequent Debits/Credits are used in cases where the quantity is in the original invoice is to remain the same. For eg.
PO 10 - $10
Gr 10 - $10
LIV 10 - $11 (Logistics Invoice Verification)
The vendor invoice is more than that in the Purchase Order. In order to correct, the Vendor may send in another invoice for
the Increased amount or a credit memo for the increased amount.
If you approve of the price increase, post the subsequent invoice received as a Subsequent Debit/Credit Invoice.
If it is a credit memo that has been received, then post the credit memo as Subsequent Debit/Credit.
This would retain the quantity but reduce the amount.
Subsequent Debit/Credit is for the case when the credit is not for the full amount eg. if the Vendor decided to credit
only the $1 overcharged.
Credit memo is for the credit of the full amount and value.
Maybe you are looking for
-
How can Java read VC++ serialized achieve file
After finally realizing Java is much more powerful than C++, I am currently transferring my VC++ codes to Java and having a problem on how to read my old VC++ serialized achieve files. In java.io, can readObject() do the same job as VC++'s Serialize(
-
Solution Manager storing ECC's ST03n data - is this possible?
Hi All Currently we keep the regular 3 months worth of ST03n data in our ECC System and there has been a request to keep more than the the 3 months. So as we don't really want this data in ECC we would like to take it out and have in in Solution Mana
-
COPA extraction issues - Incorrect field name for selection
Dear gurus, I've issues with my COPA extraction, hope you guys could give me some clue here, point will be rewarded if I could fine the solution. Requirement:- To add additional field. Step:- As usual 1) Delete 2) Create back with sele
-
Error : database is being refreshed
I am getting this error: com.hyperion.planning.HspCubeRefreshInProgressException: Cannot complete your request because the database is being refreshed....when I try to do anything to the system. I think the application is stuck in this mode because I
-
I damaged my phone and i'd like to know if i can swap it and pay 200$ at any apple store in the world? This policy is applied in the US and Canada. Does it apply in Barcelona too? Thank you