Different time in show clock and show calendar

Hi all,
I am having problem with figuring out how to adjust time between show calendar and show clock.
Basically time difference between this commands is roughly 40 minutes.
Please look on the screenshot:
Also my router configurations is:
! No configuration change since last restart
! NVRAM config last updated at 05:26:42 GMT Mon Dec 8 2014
version 12.4
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
hostname RtrPod1
boot-start-marker
boot system usbflash0:c2800nm-advipservicesk9-mz.124-24.T1.bin
boot-end-marker
logging message-counter syslog
enable secret 5 $1$kABI$oyiPktODUDz4Ahdz7pCma0
no aaa new-model
clock timezone GMT 13
clock summer-time GMT recurring
clock calendar-valid
no network-clock-participate wic 1
network-clock-participate wic 2
dot11 syslog
ip source-route
ip cef
no ip dhcp use vrf connected
ip dhcp excluded-address 10.110.0.1 10.110.0.10
ip dhcp excluded-address 10.115.0.1 10.115.0.10
ip dhcp pool Data
   network 10.110.0.0 255.255.255.0
   default-router 10.110.0.1
ip dhcp pool Voice
   network 10.115.0.0 255.255.255.0
   default-router 10.115.0.1
   option 150 ip 10.115.0.1
no ip domain lookup
no ipv6 cef
ntp server 192.189.54.33
multilink bundle-name authenticated
voice-card 0
crypto pki trustpoint TP-self-signed-1408351535
 enrollment selfsigned
 subject-name cn=IOS-Self-Signed-Certificate-1408351535
 revocation-check none
 rsakeypair TP-self-signed-1408351535
crypto pki certificate chain TP-self-signed-1408351535
 certificate self-signed 01
  3082023F 308201A8 A0030201 02020101 300D0609 2A864886 F70D0101 04050030
  31312F30 2D060355 04031326 494F532D 53656C66 2D536967 6E65642D 43657274
  69666963 6174652D 31343038 33353135 3335301E 170D3134 31323037 31363236
  34325A17 0D323030 31303130 30303030 305A3031 312F302D 06035504 03132649
  4F532D53 656C662D 5369676E 65642D43 65727469 66696361 74652D31 34303833
  35313533 3530819F 300D0609 2A864886 F70D0101 01050003 818D0030 81890281
  81009EEF ADD1297E 7CD9BE3E 5BD3798D 10831172 0E025CB9 C7E57188 006DA7E1
  E7B1D9A9 73EC5C53 841413DE E3E4AECD BC80C3D1 CC6BA113 B91CC736 16AF1576
  F37F8437 C9577F4A 0AE72460 1E524E06 74E8DD39 E6952E1F 85547E71 1AD3DE5A
  6DCB12E9 BD953716 13B41148 320EC307 9E45B084 80D0591A E49E8AE2 D87C0716
  86430203 010001A3 67306530 0F060355 1D130101 FF040530 030101FF 30120603
  551D1104 0B300982 07527472 506F6431 301F0603 551D2304 18301680 14880D89
  51BCB633 B6F32385 71C9A39E 72149EAF 99301D06 03551D0E 04160414 880D8951
  BCB633B6 F3238571 C9A39E72 149EAF99 300D0609 2A864886 F70D0101 04050003
  8181001C 63A1BE6C BC96B738 05446ABC ACE19FBF 0054F6B5 100BA758 9A48FAF8
  34B65325 3A374B08 2D8919BF 09ED604F 2F1B7A33 C25CFC7E 6DD55DA6 02CD7E78
  4272ADF7 15158EDE 4A1115A9 06BBDA02 E65E5AC8 559103C4 98EF7371 20568663
  ADF16711 60F8C5E0 ECDB5321 B3ABB8D5 2F42F19E 07D65ADF BABCDE63 50B43773 87AD10
      quit
username student privilege 15 secret 5 $1$o8qC$cxUuwRjEtfvasjtjfNZAv/
archive
 log config
  hidekeys
controller E1 0/1/0
interface GigabitEthernet0/0
 no ip address
 duplex auto
 speed auto
interface GigabitEthernet0/0.110
 description Data VLAN
 encapsulation dot1Q 110
 ip address 10.110.0.1 255.255.255.0
interface GigabitEthernet0/0.111
 description Management VLAN
 encapsulation dot1Q 111
 ip address 10.111.0.1 255.255.255.0
interface GigabitEthernet0/0.115
 description Voice VLAN
 encapsulation dot1Q 115
 ip address 10.115.0.1 255.255.255.0
interface GigabitEthernet0/1
 ip address dhcp
 duplex auto
 speed auto
interface Serial0/0/0
 no ip address
 shutdown
 clock rate 2000000
interface BRI0/2/0
 no ip address
interface BRI0/2/1
 no ip address
interface Service-Engine1/0
 no ip address
 shutdown
ip forward-protocol nd
ip route 0.0.0.0 0.0.0.0 192.168.15.1
ip http server
ip http authentication local
ip http secure-server
ip http path usbflash0:/gui
tftp-server usbflash0:phone/7942-7962/apps42.8-4-1-23.sbn alias apps42.8-4-1-23.sbn
tftp-server usbflash0:phone/7942-7962/cvm42sccp.8-4-1-23.sbn alias cvm42sccp.8-4-1-23.sbn
tftp-server usbflash0:phone/7942-7962/jar42sccp.8-4-1-23.sbn alias jar42sccp.8-4-1-23.sbn
tftp-server usbflash0:phone/7942-7962/cnu42.8-4-1-23.sbn alias cnu42.8-4-1-23.sbn
tftp-server usbflash0:phone/7942-7962/dsp42.8-4-1-23.sbn alias dsp42.8-4-1-23.sbn
tftp-server usbflash0:phone/7942-7962/term42.default.loads alias term42.default.loads
tftp-server usbflash0:phone/7942-7962/term62.default.loads alias term62.default.loads
tftp-server usbflash0:phone/7942-7962/SCCP42.8-4-2S.loads alias SCCP42.8-4-2S.loads
tftp-server usbflash0:Desktops/320x196x4/big.png
tftp-server usbflash0:Desktops/320x196x4/small.png
tftp-server usbflash0:Desktops/320x196x4/List.xml
tftp-server usbflash0:Ringtones/Analog2.raw
tftp-server usbflash0:Ringtones/AreYouThere.raw
tftp-server usbflash0:Ringtones/AreYouTheref.raw
tftp-server usbflash0:Ringtones/Bass.raw
tftp-server usbflash0:Ringtones/CallBack.raw
tftp-server usbflash0:Ringtones/Classic1.raw
tftp-server usbflash0:Ringtones/Classic2.raw
tftp-server usbflash0:Ringtones/ClockShop.raw
tftp-server usbflash0:Ringtones/Drums1.raw
tftp-server usbflash0:Ringtones/Drums2.raw
tftp-server usbflash0:Ringtones/FilmScore.raw
tftp-server usbflash0:Ringtones/HarpSynth.raw
tftp-server usbflash0:Ringtones/Jamaica.raw
tftp-server usbflash0:Ringtones/KotoEffect.raw
tftp-server usbflash0:Ringtones/MusicBox.raw
tftp-server usbflash0:Ringtones/RingList.xml
tftp-server usbflash0:Ringtones/DistinctiveRingList.xml
tftp-server usbflash0:Ringtones/Piano1.raw
tftp-server usbflash0:Ringtones/Piano2.raw
tftp-server usbflash0:Ringtones/Pop.raw
tftp-server usbflash0:Ringtones/Pulse1.raw
tftp-server usbflash0:Ringtones/Ring1.raw
tftp-server usbflash0:Ringtones/Ring2.raw
tftp-server usbflash0:Ringtones/Ring3.raw
tftp-server usbflash0:Ringtones/Ring4.raw
tftp-server usbflash0:Ringtones/Ring5.raw
tftp-server usbflash0:Ringtones/Ring6.raw
tftp-server usbflash0:Ringtones/Ring7.raw
tftp-server usbflash0:Ringtones/Sax1.raw
tftp-server usbflash0:Ringtones/Sax2.raw
tftp-server usbflash0:Ringtones/Chime.raw
tftp-server usbflash0:Ringtones/Vibe.raw
control-plane
voice-port 0/2/0
voice-port 0/2/1
voice-port 0/3/0
voice-port 0/3/1
voice-port 2/0/0
voice-port 2/0/1
voice-port 2/0/2
voice-port 2/0/3
voice-port 2/0/4
voice-port 2/0/5
voice-port 2/0/6
voice-port 2/0/7
 shutdown
mgcp fax t38 ecm
mgcp behavior g729-variants static-pt
telephony-service
 max-ephones 5
 max-dn 10
 ip source-address 10.115.0.1 port 2000
 load 7962 SCCP42.8-4-2S
 max-conferences 8 gain -6
 web admin system name webadmin secret 5 $1$MafG$7vShhmB.Tlfy22rnE88BK1
 transfer-system full-consult
 create cnf-files version-stamp 7960 Dec 08 2014 05:26:39
line con 0
 exec-timeout 120 0
 password cisco
 logging synchronous
 login
line aux 0
line 66
 no activation-character
 no exec
 transport preferred none
 transport input all
 transport output pad telnet rlogin lapb-ta mop udptn v120 ssh
line vty 0 4
 exec-timeout 120 0
 password cisco
 logging synchronous
 login local
 transport input telnet ssh
line vty 5 15
 exec-timeout 120 0
 password cisco
 logging synchronous
 login local
 transport input telnet ssh
scheduler allocate 20000 1000
end
And my switch configuration is:
! No configuration change since last restart
version 12.2
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
hostname SwPod1
boot-start-marker
boot-end-marker
enable secret 5 $1$LDXy$1QdQ73kHv.8sQenQNMq19.
no aaa new-model
clock timezone GMT 13
clock summer-time GMT recurring
system mtu routing 1500
authentication mac-move permit
ip subnet-zero
no ip domain-lookup
crypto pki trustpoint TP-self-signed-2133227136
 enrollment selfsigned
 subject-name cn=IOS-Self-Signed-Certificate-2133227136
 revocation-check none
 rsakeypair TP-self-signed-2133227136
crypto pki certificate chain TP-self-signed-2133227136
 certificate self-signed 01
  3082023F 308201A8 A0030201 02020101 300D0609 2A864886 F70D0101 04050030
  31312F30 2D060355 04031326 494F532D 53656C66 2D536967 6E65642D 43657274
  69666963 6174652D 32313333 32323731 3336301E 170D3933 30333031 30303030
  35385A17 0D323030 31303130 30303030 305A3031 312F302D 06035504 03132649
  4F532D53 656C662D 5369676E 65642D43 65727469 66696361 74652D32 31333332
  32373133 3630819F 300D0609 2A864886 F70D0101 01050003 818D0030 81890281
  8100B71D E6CDD16E D6FEDB25 EC976368 7925A2F8 75EE3EF0 D4C371DA 4B5539BB
  E3A9552F DE35F37B 45A2C5C4 30FEF8D7 C3C5C489 C08C8A90 B415D331 F4653100
  DC1E0ECE D93B2BF5 339C7B3A D170B80A AFEE8DA9 A82263F9 6324F8FA 94BB253E
  7B0B45D6 81E39078 1607DED1 85C69650 AB7D7419 96604F65 D9204BC8 1BC259BB
  6D0B0203 010001A3 67306530 0F060355 1D130101 FF040530 030101FF 30120603
  551D1104 0B300982 07537750 6F64312E 301F0603 551D2304 18301680 14C16878
  2994DA55 82E0FAD0 046CED6D 0EBDA0EE AA301D06 03551D0E 04160414 C1687829
  94DA5582 E0FAD004 6CED6D0E BDA0EEAA 300D0609 2A864886 F70D0101 04050003
  81810090 C6829BAE 9B2A3A31 2A32C1FB AC7946E5 287A43B6 EC9F31D5 13296A2E
  1810E5EB 2503617C C4CCDF9D 421E2372 E94A8BFA D73AB361 46BF80E4 B2C3E828
  6DB62E7F DE5E0F6F B93A885E 3A5E13CA 6D95426C 9494C22D 005E8BC9 C6C012D5
  DF186CFB 194BC416 89566F98 0C21CC79 D477022C A4845D94 EE0FC299 7C7710C5 32F314
  quit
spanning-tree mode pvst
spanning-tree etherchannel guard misconfig
spanning-tree extend system-id
vlan internal allocation policy ascending
interface FastEthernet0/1
 switchport trunk encapsulation dot1q
 switchport mode trunk
interface FastEthernet0/2
 switchport access vlan 110
 switchport mode access
 switchport voice vlan 115
 spanning-tree portfast
interface FastEthernet0/3
 switchport access vlan 110
 switchport mode access
 switchport voice vlan 115
 spanning-tree portfast
interface FastEthernet0/4
 switchport access vlan 110
 switchport mode access
 switchport voice vlan 115
 spanning-tree portfast
interface FastEthernet0/5
 switchport access vlan 110
 switchport mode access
 switchport voice vlan 115
 spanning-tree portfast
interface FastEthernet0/6
 switchport access vlan 110
 switchport mode access
 switchport voice vlan 115
 spanning-tree portfast
interface FastEthernet0/7
 switchport access vlan 110
 switchport mode access
 switchport voice vlan 115
 spanning-tree portfast
interface FastEthernet0/8
 switchport access vlan 110
 switchport mode access
 switchport voice vlan 115
 spanning-tree portfast
interface FastEthernet0/9
 switchport access vlan 110
 switchport mode access
 switchport voice vlan 115
 spanning-tree portfast
interface FastEthernet0/10
 switchport access vlan 110
 switchport mode access
 switchport voice vlan 115
 spanning-tree portfast
interface FastEthernet0/11
 switchport access vlan 110
 switchport mode access
 switchport voice vlan 115
 spanning-tree portfast
interface FastEthernet0/12
 switchport access vlan 110
 switchport mode access
 switchport voice vlan 115
 spanning-tree portfast
interface FastEthernet0/13
 switchport access vlan 110
 switchport mode access
 switchport voice vlan 115
 spanning-tree portfast
interface FastEthernet0/14
 switchport access vlan 110
 switchport mode access
 switchport voice vlan 115
 spanning-tree portfast
interface FastEthernet0/15
 switchport access vlan 110
 switchport mode access
 switchport voice vlan 115
 spanning-tree portfast
interface FastEthernet0/16
 switchport access vlan 110
 switchport mode access
 switchport voice vlan 115
 spanning-tree portfast
interface FastEthernet0/17
 switchport access vlan 110
 switchport mode access
 switchport voice vlan 115
 spanning-tree portfast
interface FastEthernet0/18
 switchport access vlan 110
 switchport mode access
 switchport voice vlan 115
 spanning-tree portfast
interface FastEthernet0/19
 switchport access vlan 110
 switchport mode access
 switchport voice vlan 115
 spanning-tree portfast
interface FastEthernet0/20
 switchport access vlan 110
 switchport mode access
 switchport voice vlan 115
 spanning-tree portfast
interface FastEthernet0/21
 switchport access vlan 110
 switchport mode access
 switchport voice vlan 115
 spanning-tree portfast
interface FastEthernet0/22
 switchport access vlan 110
 switchport mode access
 switchport voice vlan 115
 spanning-tree portfast
interface FastEthernet0/23
 switchport trunk encapsulation dot1q
 switchport mode trunk
interface FastEthernet0/24
 switchport access vlan 110
 switchport mode access
 switchport voice vlan 115
 spanning-tree portfast
interface GigabitEthernet0/1
interface GigabitEthernet0/2
interface Vlan1
 no ip address
 shutdown
interface Vlan111
 ip address 10.111.0.2 255.255.255.0
ip default-gateway 10.111.0.1
ip classless
ip http server
ip http secure-server
ip sla enable reaction-alerts
line con 0
 exec-timeout 120 0
 password cisco
 logging synchronous
 login
line vty 0 4
 exec-timeout 120 0
 password cisco
 logging synchronous
 login
line vty 5 15
 exec-timeout 120 0
 password cisco
 logging synchronous
 login
ntp clock-period 36028575
ntp server 10.110.0.1
end
Any help will be highly appreciated.

Have you tried using "ntp update-calendar"?

Similar Messages

  • One hour time difference between Palm and Exchange calendar items

    Calendar items on Exchange and Palm are off by one hour.
    Exchange server, desktop PC and Palm are all set to PST with the same time. Versamail account on Palm has been deleted and rebuilt.
    See screen shots at http://picasaweb.google.com/lh/photo/kPKBDS28rhdVsextLM1PPQ?feat=directlink
    What is interesting is the appointments entered in Outlook show up on the Palm one hour early however they show the correct time in (parenthises) so the Palm seems to be somewhat aware of the problem.
    This same issue occurs on different Palm T/X 's with different Outlook accounts.
    Any suggestions are welcome
    Post relates to: Palm TX
    This question was solved.
    View Solution.

    You need this update:
    http://www.palm.com/cgi-bin/cso_kbURL.cgi?ID=9306
    Download
    DSTUpdater.zip (0.01MB)
    Double-click the downloaded file to decompress it. Your computer will unzip the file to a folder containing several individual files.
    Message Edited by IrreducibleM31 on 03-26-2009 05:12 PM

  • PI 7.30 dual stack - different time in rwb, pimon and ABAP stack

    Hi @all,
    I am working with the client on a PI 7.30 dual stack system.
    During monitoring of message processing I saw that there are differences in the time displayed while monitoring the processing of identical messages
    e.g. channelmonitor (mdt/channelmonitorservlet and rwb) is 1 hour behind pimon
    The time displayed in the ABAP Stack (Menu System - Status) differs also 2 hours ahead of pimon.
    Are there java parameters to configure the used time zone and which could be reason for this behaviour.
    For me it seems strange that there is a difference between to tools (channelmonitor and pimon) I was supposing are based on the same technical stack
    Would be nice to have the same time throughout the whole system.
    Any help appreciated.
    Best regards
    Jochen

    Hi Jochen,
    I did not found the option to change the time zone for pimon. Please refer the below wiki it might helpful
    PiMon_TroubleshootingGuide - Technical Operations - SCN Wiki
    PiMon_Frequently Asked Questions - Technical Operations - SCN Wiki
    regards.
    Harish

  • How do I insert multiple simple objects at different times into a video, and see all of them?!

    I'm trying to make a very simple 20 second video clip of me hula hooping, and every 4 seconds, draw a circle around my hula hoop that remains there for the duration of the video. So at the beginning there will be 1 circle, at the end there will be 6. For some reason I can only figure out how to make one of these circles visible at a time. I've been googling and youtubing for the the past 2 hours and I can't find anything on how to do this?! It's very simple, i don't understand why I'm having such a hard time! Please help!

    Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
    http://forums.adobe.com/thread/419981?tstart=0
    Thanks!

  • Objects to show at different times on a slide not showing up

    Hi  Everyone,
    I hope this problem is minor and that I’m just missing a small step but here it goes…
    I’m using Captivate 4 and I’ve only been using it on one particular computer. I updated a captivate project that I’ve been working on since September and I’ve finished all the edits (added a picture, changed a few words) as requested by colleauges when all of a sudden, some objects that were suppose to show at different times on the slide were not showing up at all. The frustrating part is I actually finished the project! When I do a preview within the edit view, the objects appear as it should, however, when I publish it or do a preview on wepage, the objects are not appearing at all (ie a word at 10 sec, another at 20 sec). Anway, there were only 3 slides acting like this, all with objects are suppose to show up at different times on the slide (these were not the slides that I recently edited). My video works fine, my quiz works fine, and I’ve uploaded an initial version of my work on a Pathlore LMS with no problems (publish specs: flash 8, AS2).
    I have several other projects that are less complicated (ie no video, no objects showing at different times within the slide) and they are OK. I’ve checked on other computers and same problem.
    I tried deleting the slides, and redoing it again within the same project but still wont work I tried copying everthing on a new project with the same size with no luck.
    I tried making a 2 slide project with objects showing up at different times and it works.
    Is my project corrupted in some way? What are the possible culprits for this problem?
    I really hope I don’t have to start from scratch…
    Thanks in advance!

    Hi there
    While it's certainly possible that the project has somehow become corrupt, you might find that simply closing and restarting Captivate changes things.
    Have you tried that? I've seen it where bits and pieces are suddenly missing. After I restarted, things were just fine again.
    Cheers... Rick
    Helpful and Handy Links
    Captivate Wish Form/Bug Reporting Form
    Adobe Certified Captivate Training
    SorcerStone Blog
    Captivate eBooks

  • Different time zones in the same calendar subscription

    Dear kind helpers,
    To state my problem as clear as possible, I need to be a bit long. Sorry for that.
    I registered to a calendar displaying the rugby schedule for the VI nations tournament:
    -> http://www.rbs6nations.com/tools/calendars/sixnations-fixtures-6n-all.ics
    from the official web site:
    -> http://www.rbs6nations.com/en/matchcentre/downloadable_fixture_list.php
    The only thing you need to know about this tournament is that it involves 6 teams (hence the name):
    - 2 on the continent, then at GMT+1 (France and Italy),
    - 4 on the British Isles (Englands, Walles, Scotland and Ireland), then at GMT+0
    I think all of these nations have the same summer / winter shifts.
    I'm on the continent, Central European Time for the time zone support feature on iCal (OS 10.9.1).
    I guess it's GMT+1 plus winter shift at the moment.
    I notice the same following problem on my iPod (iOs 5.1.1), sync through iCloud
    Here the problem : it seems all the games are in local times !
    For instance, a game in the Islands (Scotland, England, ...) appears at 5pm whereas I would like it to appear at 6pm (so the time is correctly displayed for British Isles, not for the continent) / a game on the continent (France or Italy) will appear at 5pm and I'm fine because it's right the correct time in my time zone. I've no idea how a game which takes place on the continent appears in the British Isles :-(
    So a few questions :
    - am I clear about the problem ?
    - is it a problem from iCal or from the subscription itself ?
    - in case it's iCal, is there a way to fix the trouble ?
    PS : I experienced the same problem with an other subscription a few years ago ; it was also for a european championship schedule across different time zones displayed in the same calendar. This one was discontinued.
    Thanks in advance.

    Hi,
    This is an issue with the subscription itself. The times for the events are set in 'floating' time and whatever time zone you use it iCal will show the event as being at that time local time (which obviously won't be right unless you are in the correct time zone).
    I could post a more technical explanation if you like.
    Best wishes
    John M

  • Why do my MacAir and iPhone show different times?

    I have a MacAir running OSX Yosemite. I also have an iPhone 6. I get both to update the times shown on their clocks automatically. Last month, there was a 2 minute difference between the two; now there is a 3 minute difference. (the MacAir is always ahead) This might sound like a tiny issue but I use my MacAir for presentations and have my phone showing the time fullscreen too - to ensure I keep exactly to time. So it's quite off-putting to have two different times showing.
    Any idea how I can get them in synch with each other?
    Many thanks!
    James

    I have a MacAir running OSX Yosemite. I also have an iPhone 6. I get both to update the times shown on their clocks automatically. Last month, there was a 2 minute difference between the two; now there is a 3 minute difference. (the MacAir is always ahead) This might sound like a tiny issue but I use my MacAir for presentations and have my phone showing the time fullscreen too - to ensure I keep exactly to time. So it's quite off-putting to have two different times showing.
    Any idea how I can get them in synch with each other?
    Many thanks!
    James

  • Different times showing for an event

    I received in invite from someone who is one hour behind me. He sent me a test invite ("Fake 2") for 10am my time, which is 9am his time.
    In the Calender, the time is shown correctly, but when I click on it, it shows his time zone. Why is that? Why won't it show the time of the meeting in my time zone? Note that on my iPad, I see 10am in both cases.
    This looks like this has something to do with the "Turn on time zone support" preference. However, I'd like to be able to use that function to change times if I want to set my Calendar to different time zones I'm visiting but see the actual time of the event in my time zone when I click it. If not, it can be a bit confusing to see two sets of times.
    What am I missing?
    Thanks,
    Tony

    Dispatching event from any component by either by using this or simply without this
    can not be listen by each and every componet of the application,depends upon where you have write addListner. Check Event life cycle
    in the flex. While if you are using the system manager for dispatching the event and
    also for listenting the event so in that case you will always listen the event.
    You can visit this link for making it simple to use and understand.By this way you can always listen your event
    inside any component in your application.
    http://shardulbartwal.wordpress.com/2009/04/15/managing-custom-events-in-flex-30-in-a-easy -way/
    Hope it will help you.
    with Regards,
    Shardul Singh Bartwal

  • Alert Log time showing a different time

    Hi,
    Our Oracle 10g database is hosted on HP-UX B.11.31 U ia64 server. Recently after Rebooting the server
    we noticed the time in the alert.log and the time in the server is entirely different.
    when we queried the date in the database and in the server it shows the same time, but the alert.log is giving
    the different time.
    Whether anyone experienced this sort of problem and plz share how you rectified it

    "When you query the time from database say select sysdate from dual, it is taken from system time"
    It is a bit more complicated.
    When you use the BEQueath protocol, the time is taken from the system clock, modified by the TZ variable for your session.
    When you connect using the listener, the time is taken from the listener, modified by the TZ variable for the listener session.
    When you are on RAC, the listener inherits the time from the global services daemon, modified by the TZ variable for the global services daemon.
    I had to investigate this, as Oracle 9i doesn't understand the M3.5-M10:4 syntax I need to make sure the summertime switches on the Europan moment.
    Regards,
    Sybrand Bakker
    Senior Oracle DBA

  • Droid X showing 3 different times at once

    Droid x displays 3 different times simultaneously.   At this moment the lock screen show 9:23 pm the digital clock widget on my home page shows 10:25 pm and the small clock in upper right show 10:21 
    I've tried rebooting both with and without auto update turned on
    It is unpredictable when my alarm will go off and I have lots of times too choose from to get someplace on time...
    Should mention that this past weekend (during DST) I traveled from MA to NS Canada.  But have traveled to Nova Scotia many times without having this issue.
    how do I fix?
    Wayne

    Oh no, WayneL!  That's not good.
    I would like to help.
    Just as bearone21 mentioned, this can be application related as well as location related.  What zip code are you located in?  Have you downloaded any particular Clock widgets?  If so, remove the widget and see if the time shows correct.  Also, let me suggest you power off the device and remove the battery for approximately 30-60 seconds, then once powered back on reprogram by dialing *228 and select Option 1.  Once reprogrammed, see if the time displays correctly.
    Let me know the results of your testing so I see if we need to further troubleshoot.
    Thanks,
    AnthonyTa_VZW
    VZW Support
    Follow us on Twitter @VZWSupport

  • I inadvertedly changed a setting where the top of my screen no longer shows the apple logo in the top left or the clock and wifi status and strength on the top of the screen, how can I get it to show both of these things again like it used to?

    I inadvertedly must have changed a setting where the apple logo and files and things that used to be in the top left corner of the screen are no longer there as the clock and wifi status and other installed settings used to show up in the top right hand corner of my screen.  When I move my mouse to the very top of the screen they drop down but when I move my arrow away from the very top of the screen they both disappear again.  So I was wondering how can I get it to revert back to the way it used to be?  I hope this isnt confusing.

    I tried the zoom thing but it still didnt resolve my issue   Im gonna try to clarify my issue a little bit more, before the change, my screen when I would surf the web would have the apple logo and safari and file and edit and view buttons at the top left hand of the screen and the upper right hand screen would have the time and the wifi strength and my name and the spotlight box and a volume control but now they dont show while Im browsing the web unless I take my arrow and move it to the very top of the screen then those boxes will drop down like it used to be but when I take my arrow and move it from the top of the screen it disappears again and ll I get is a back and forward arrow and the url input bar.  Anyone else have any ideas of what I did to mess this up?

  • Date and time not showing correct whe imported to Power query

    Hi,
    I have an Excel list that I imported to another Excel file via Power query. A few of the imported columns contains date and time, for example 2013-11-09 20:19. When imported to Power query this will show as 41587.84652777778 and only dates/times with zero
    hours and minutes will show correctly. When trying to change the data type to Date/Time it returns an error for all cells containing hours and minutes.
    I use a Swedish version of Excel that uses a different time format compared to standard excel and also uses a , as a delimiter between date and time compared to the . used as delimiter in standard excel. Don't know if that can explain
    this problem?
    Brgds,
    C

    I updated Power query earlier this week, so it should be the latest version. When I created the sample file now the problem appears, so if it is a bug it has not been solved.
    You find the sample file on the link below. 4 sheets with some info on the problem, the data, the query result and one sheet with the data and query result as pictures as it shows in my version of Excel, I guess it will look somewhat different when you open
    the file due to local date/time settings.
    Appreciate feedback on what you find!
    //Caj
    https://skydrive.live.com/redir?resid=94DF9214E3A6D4!107&authkey=!AEuAXX_kPC7yKaI&ithint=file%2c.xlsx

  • This is second time i show my problem and no answer.

    this is second time i show my problem and no answer.
    I have problem in my iphone icloud password and apple password are not same ihave apple password when i wont
    to access to icloud i cant but no problem to use apple password in app store.
    my problem is iforget icloud password and its not same apple password and iclud password?
    plz help me plz

    You got an answer here: I forget icloud password. Apple ID and icloud have different password  And i cant use apple id in i cloud   Plz help me

  • Month and Week Calendar view - does not show events that span days?

    In the weekly and monthly calendar views, if you have an event, such as a show or an appointment where you will be out of town for several days, the view will only show the appointment for the first day, and not for the entire event life. For example, in MS Outlook, if you schedule an event that begins on Date 1 and ends of Date 2, spanning several days, the calendar will show the date range as blocked off. Does the calendar in CRM do the same? If so, is this a setup parameter?
    Also, with the calendar, is there a way to have the small calendar in the left panel show the days with a scheduled event to be bold or somehow indicate that there is an event on that day?
    Edited by: nsidev on Aug 11, 2009 6:38 AM

    According to CRM Support
    CRM Support wrote:the ability to block off a multi-day appointment in the Weekly and Monthly Calendar Views is not currently available on our product. However, we have submitted this functionality to our engineers as an enhancement request. At this time we are unable to provide an estimated time of implementation while this request is being analyzed and processed.
    Simple things seem hard for the Siebel guys.
    Edited by: nsidev on Aug 14, 2009 7:11 AM
    Edited by: nsidev on Aug 14, 2009 7:12 AM

  • My ical is showing "on my mac" "iCloud" and "yahoo" calendars. I just want one calendar that will sync up to my iPhone. How can I get rid of all these Calendars???

    My ical is showing "on my mac" "iCloud" and "yahoo" calendars. I just want one calendar that will sync up to my iPhone. How can I get rid of all these Calendars??

    'On My Mac' and Yahoo calendars won't sync to iCloud. You can move them to iCloud, but then Yahoo will lose contact with its calendars. if you are happy to sync onlly with iCloud, and thus to your iPhone, you can move the calendars: you will have to do it one at a time, and the process is just a trifle convoluted - it's described in the first set of numbered instructions here:
    http://www.wilmut.webspace.virginmedia.com/notes/icloudmovecalendars.html

Maybe you are looking for