Different Zoning configuration in a fabric?

Dear All,
I use two MDS 9124s to connect each other by ISL.
I use Fabric Manager to edit Zoning Configuration, and save it.
I found only one switch has zoning config by "show run", another switch does not have consistent zoning config.
Is it possible we can get the same zoning config on both switches?
Base on above situation, does it mean I should edit zoning config on only principle switch?
Thank you for any input.
Dennis

Hello Dennis,
You can use zone distribution to distribute Full zone to other switches with zone enahance mode
To enable enhance zone follow direction below. Please enable on all switches in fabric.
After edit the zones and zoneset, you must do "zone commit vsan XX" to distrubute Full zone and zoneset to other switches.
conf t
zone mod enhance vsan XX
exit
zone commit
If you want to distribute Full zoneset only in basic mode, follow direction below. Everytimes activate the zoneset, a full zoneset will also distribute to the other switches. Please enable the same on other switches in the fabric.
cont t
zoneset distribute full vsan XX
exit
no need to run zone commit on this mode

Similar Messages

Quality info records: different pack configurations for same raw material

how can i differentiate different pack configuration for same raw material in quality info records, as one might approved and the other not? that is, besides creating different material master for each packaging?
thanks
Alisa

You need to use the MPN profile functionality that is a standard part of SAP.
In Config under the purchasing define the MPN profile. There are several options you can turn on/off including info records.
You assign the MPN profile to your material. It now is considered by SAP to be an internal material number.
You then create a HERS material type for each separate manufacturer material number you have. You only need the purchasing view for these materials. You can also create purchasing text views, classification and some others if you wish.
In the SAP approved vendors list (AVL), you then assign each manufacturer vendor(s) with the HERS material created.
You create a Q-info record for each manufacturer/HERS material combination.
Now, when you specify the internal material number in a PO, the system will tell you to order the MPN material. When you do the drop down for the material now, it will show you the approved manufacturers allowed in the AVL for the ordering plant.
When the 01 inspection lot is created you will have a vendor number as well as a manufacturer's number in the inspection lot. The DMR can be done by the manufacturer or the vendor depending on how you set up the inspection plan. Q-info record will be used accordingly.
Take a look at it and research it. It's not hard to set up.
FF

Campaign - Need to provide 2 different View Configurations for same Role

Hello,
I need to provide for the same role config key 2 different view configurations for campaigns. Initially I wanted to do that with transaction types, but then I found out that there are no transaction types for campaigns.
Does anyone know a way to do that? I don'T want to use a BADI for it, best would be a standard way.
Thanks!

You use Object Types to distinguish between views of same RoleConfigKey. In SPRO 'UI Framework Definition', you create object types and they would be available when you create a view config. Just select the object type as it forms part of the 'key' that idenitifies that particular view. In DO_CONFIG_DETERMINATION method of that view, you call a config based on this Object Type. So same view can produce two or more configs for same user in different scenarios.

When we do a failover to a Replica, what happened to the connected clients? Assuming that the Replica is located in a remote DR site with a different IP configuration.

When we do a failover to a Replica, what happened to the connected clients? Assuming that the Replica is located in a remote DR site with a different IP configuration.
Hi,
I need some guidance here, please.
I have some questions about replication:
When we do a failover to a Replica, what happened to the connected clients? Assuming that the Replica is located in a remote DR site with a different IP configuration.
Is possible to automate the failover process? Just like happens in a cluster.
What changes do I need to do in order to guarantee that my clients reach my replica? For example, I need to do a failover to my Exchange Server Replica and I need to minimize the downtime. The same applies for a DC or a SharePoint Server
  Thanks in advanced.

Hi efebo,
“The same applies for a DC ”
As for replicating virtualized DC (Personally,  I do not suggest to replicate DC , even though it can be replicate ), please refer to following link:
http://technet.microsoft.com/en-us/library/dn250021.aspx
"In short, Exchange does
not support the Hyper-V Replica feature. Exchange has a long history of supporting virtualisation from
Exchange 2003 onwards. It is fully supported to install Exchange
2007,
2010 or
2013 as a virtual machine on Hyper-V, but using the Hyper-V replica feature is not supported.
For details please refer to following link:
http://blogs.technet.com/b/rmilne/archive/2013/07/29/exchange-and-hyper-v-replica-support.aspx
I assuming that the "Remote DR site" and the primary site both have public IPs .
Based on my knowledge you can not access replica site VM  directly after a disaster , maybe you need to rebuild primary site and replicate VM back .
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

W2k8R2 Windows Backup - BMR on different disk configuration - How to move one parition of three parition to an other raid-disk?

Hello folks,
I need your help in following situation.
My source-system has 1 RAID5 (600GB) over 5 HDDs. On the RAID-Disk are one primary partition (250GB) and 1 extended partitions (350GB).
Because the hardware is out of support, I will migrate it to new hardware-server. I must minimized the downtime and the administrative effort. So I can't reinstall a new windows-installation, because 4 different software-licences are binding on SID. Additional
a DFS-R is configured, so I need some hours to reconfigure it.
The new destination-system has one RAID1 (300GB) that I will use it for windows-system, and one RAID 6 (1TB) that is planed for data.
I has make a full backup (with all Critical) by using Windows Server Backup to a NAS storage. Than I has boot my destination system from Windows Server 2008 R2 media, and will make a recover. All Hard Disk is detected, after I install the storage-drivers. When
I confirm the last step in windows-server-backup, windows-backup stop with error "Not enough space on harddisk 0"
How can I move the extended partition to harddisk 1 (RAID6) durring BMR??? I cann't exclude the volume in backup-procedure, because the DFS-R is installed with some share on this disk.
Has anyone a idea?
Best regards

Hi,
I'm afraid we will not get it resolved. BMR will restore the partition information so you need at least a 600GB disk/RAID to restore both Drive C and D - it will create partitions on disk/RAID but cannot be separated restore to different disks/RAIDs.
How about get another 300GB disk and change your system RAID from RAID1 to RAID5. (Or change RAID1 to RAID0 but of course you will lose fault tolerance ability).
If you have any feedback on our support, please send to [email protected]

Can the RV180W have multiple SSIDs with different security configurations?

I am trying to configure the RV180W with a guest network and regular wireless network. The regular wireless network is just a bridge to the wired network, using WPA2-Pers for authentication. I built and enabled another wireless SSID, using a different VLAN and no authentication. I can get both SSIDs to function at the same time if I turn off security. Once I turn on Security, the regular one no longer functions.

It is actually all in the manual:
SEE: PDF MANUAL
Page 63 of PDF and onwards
Do note that you need to assign multiple VLAN per SSID. Check the manual it is there :D
and based on the manual you need to enable multiple VLAN support: See page 34 of the manual: Configuring Virtual LAN (VLAN) Membership
Don't forget to rate and mark as answer helpful posts! :)

Additional Agents Starting Databank at Different Records (configurable?)

I've noticed that for some reason a 2nd agent starts reading a databank from the 21st record.
The situation I had was that although I was only testing 10VUs (spread over 2 agents), one agent would always fail. I realised that what was happening was that although the 1st agent gets it's credentials from the 1st record of the databank (which has 400 records), the 2nd agent tries to use the 21st record. The problem being that the SUT currently only has 20 actual users configured (PT001-PT020) so trying to use PT021 will obviously fail! Eventually this testing will move to a different environment when all the users will be configured.
I'm working round this for the moment but is there a way of configuring this behaviour? i.e. how many records additional agents "skip"?
Regards, Ian.

Hi Ian,
Have you tried using the Range option in the databank configuration to limit the used records in the databank (1 to 20)?
Cheers,
Jamie

Building with different environment configuration

I currently work on a Portal project and have the need for building towards different environment - such as production and test. These different environment have their own configuration settings. For instance would I like to benefit of this configuration in test and production, but not in development:
http://dev2dev.bea.com/blog/gnunn/archive/2005/06/a_no_brainer_pe_1.html
Another issue is security setup. I would like to be able to run the portal file during development, but being more restrictive in test and production.
Have anyone handled this in a good automated way? Any codeshare project that might help me?
Any input appriciated.... Thanks
Trond Andersen, Invenia AS, http://www.invenia.no

Hello Jinsoo,
Yes, it should be fine to set the cache size different on the master
versus the replica.
There are several configuration items that must be set the same
across all sites, such as the size of the log file, or ack policy, etc.
You should carefully read the pages for any configuration items that
you want to have different across sites to see if it is allowed or not.
Sue LoVerso
Oracle

Second chance: Opt for another different Rmbp configuration 8gb to 16gb

Hi guys, just joined in the communities. A week ago, I got my rmbp which has the base model. Corei7 2.4GHz, 8GB RAM, 256GB SSD storage. So I've been thinking if I can send my rmbp back to apple just to have a different configuration. The problem is the 8GB RAM does not seem to be enough for me. I don't know why... Back then, I used Windows laptop which is the MSI GX660 gaming laptop. It has Corei7 1.9GHz, 8GB RAM, 500GB storage(271 for C drive). I didn't have any problem with my previous laptop especially with the RAM. For the RAM, I always open up a browser with 5-9 tabs and itunes, these two with either game or work like MS office, Visual Basic, Dreamweaver, Java. And with that, I've never achieve more than 5GB RAM everytime I checked with my task manager (I even tried to open multiple hardcore games like Skyrim, L.A Noire and Battlefield 3 and thar only reach up to 6GB+ RAM). Same with my RMBP though, I always open up Itunes & Safari with a few tabs, but is always above 90% of the RAM. I used istat menu to monitor all the heat sensor, HDD, CPU&GPU, Connection speed. I don't know what triggers that could eat such large amount of RAM. Not to mention, I haven't even open up my Windows parallels. Even though with just a few 100+ MB left of RAM, I still can run MS office smoothly but not DW, VB or JAVA. I can even hardly explore through my external drive as it takes so long to open up the folder inside it. Ohh and the last time I tried opening up both Ubuntu & Windows VM, it got freezed. And I had to hold down the power button to shut down both VM(s)
So long story short, can I send back my 1 week old Rmbp to apple for a different configuration?
If not, at least give out some info on how to not bottleneck the Rmbp 8GB RAM?
Any information would be appreciated. And sorry if there's any complicated grammar.

One thing first, did you you configure TimeMachine to do backups? If so did you connect TM to an external disk (as should)?
In your described setup I certainly would go for 16GB of RAM. It is easily installed, but within 14 days you can bring back the rmbp and pick another choice.

BI Schedule and Presenation Server on Different Servers Configuration

I'm having a problem getting my iBots to run and deliver the information to the catalog with the following configuration:
2 Presentation Servers on Windows with IIS for NTLM authentication (via a Load Balancer)
OBIEE Server and Scheduler, and Presenation Server on Solaris (the Presentation Server on Solaris will be turned off)
The catalog between the 2 Windows Servers are are shared. When I create an iBot on the Windows the request is sent to the Scheduler on Solaris and errors out with the following message:
[nQSError: 77006] Oracle BI Presentation Server Error: A fatal error occurred while processing the request. The server responded with: Path not found (
/shared/_ibots/Test Email from UAT)^M
Error Codes: U9KP7Q94^M
My question is why does the scheduler send the alert to the Presentation Server on the Solaris box and not the shared Presentation Server with the shared catalog on the Windows Servers. Am I missing something in the configuration?
Thanks,
Chuck

I figured it out. I had to re-run the schconfig utility on UNIX and reconfigured the server from localhost:9710 to the actual server name.

Work repository on different database configuration

Hello there,
I am trying to set my work repository to be a schema on differing database to the source dataserver.
Currently when I edit the source data server and try to set the work repository I only have the option to select schemas from the source.
I have my work repository on a different database.
Can anyone help?
Regards,
CM

I have come to a conclusion that there has been a confusion over the terminologies. What you call "Work Repository" is actually a "Work Schema" in your specific case.
Then the answer is that Work Schema needs to be on the same data server as your Source Schema.
Below is a reasoning behind that:
This schema consists of temporary/intermediate work tables that are generated by ODI knowledge modules.
These work tables are similar to tables in source schema in terms of data and structure
Data is moved, copied and compared between source schema and work schema, it makes more sense to store them on the same data server to avoid any network/communication overhead.
Hence ODI warrants that the source schema and the work schema exist on the same data server.
P.S. "Work Repository" is the metadata repository that holds the data model definitions, ODI code, packages, interfaces, etc.
It works in tandem with "Master Repository"
Hope this helps you.
If you feel that your question has been answered, please mark the question as answered and all the answers that you have received as helpful or correct.
Thanks

Adobe Acrobat Pro XI - I get different toolbar configurations when opening files.

I have set up my Adobe Acrobat Pro XI with a selection of toolbars that suits my needs. So far, so good. Recently, however, when I open some files, I get a different set of tool bars that resembles the default version.
I have tried opening the files several ways (e.g. menu, double-click in Explorer, etc.). It makes no difference what I do.
How do I force Acrobat to open the files using my set of toolbars instead of this truncated version? And why is this changing?

Error Updating have you completed all of the steps listed in Error 1603: A fatal error occurred during installation? Did you have any questions on any of the steps listed?

User profiles for different hardware configurations

I have a MacBook that I want to attached to an external monitor and keyboard. Is there a way to configure it so that when I attach the monitor and keyboard it will configure itself so that I can close the lid without it going into standby mode?
I would also want it to go into standby mode when the keyboard and monitor are not attached and the lid is closed.

With iTunes you can create any number of new libraries - See This
Regards

Two devices, two different podcast configurations?

I fear I may have posed a question to the wrong sub-forum, so I'm asking again here.
I'm sure someone has this answer to this, and I'd appreciate your expertise
I have an iMac, and use it to sync and manage my podcast playlists for an iPod Touch and iPad Air. The Touch and Air have entirely different content; the Touch contains music and audio podcasts, while the iPad Air contains video and video podcasts. As Apple suggested, separated the playlists accouding to device, to easily sync with iTunes:
...and so far, this is working perfectly. Except when it comes to podcasts.
If I add a podcast to my iPod Touch, a sync will automatically cause the podcast to be added to my iPad Air the next time I sync.
I want to have completely different podcast playlist on my iPod Touch and iPad Air. How exactly do I do this? Feel free to include links to explain the solution.
Thanks!

My guess for this: if you want to have different content on your different devices, then you need to disable uncheck the "Sync podcast subscriptions and settings" box (in iTunes / Preferences / Store: there's a list of checkboxes in the bottom half). But this is going to lead to other complications.
Route 1: download podcasts only in iTunes on your computer, and then sync to your devices through playlists. This could work for some people, depending on how much you care about getting current podcasts.
Route 2: download the podcasts only on the respective devices, and listen to/watch/read them only on those devices, not on iTunes on your computer - in fact those podcast episodes never appear on iTunes at all.
My current use (with just an iPhone) is a hybrid of the above: I've turned off syncing podcast subscriptions and settings. I subscribe to "disposable" podcasts on my iPhone - those are the radio shows that I listen to basically right away and then get rid of. I subscribe to "permanent" podcasts on my desktop - those are the more "audiobook" ones that I could may listen to this week, or may listen to next year. I change the media kind of those permanent podcasts to Audiobooks so that they'll behave more reliably when syncing. Every few days, I wire-sync my iPhone to the computer to copy those podcast-Audiobooks over. (I turned off Wifi Sync long ago. Too unpredictable.)
Caveat: the latest iTunes (11.2.2?) has made the above procedure yet more of a hassle, with podcast episodes in iTunes refusing to disappear.
I only use podcasts on my iPhone, not on my iPad, but that's because I don't deal with any video podcasts - your desire to use video podcasts on one, and audio on the other, makes perfect sense to me. My own take on this is that podcasts in iTunes work fine in isolation, and podcasts on iOS devices work fine in isolation, but the syncing is a big mess. I'd like to think that Apple is trying to improve this, but each update seems to fix minor issues (now at least the play order thing is working properly for me in the Podcasts app), while making the big issue - syncing - worse.

Can I configure my network settings to use two different proxy configurations?

At work, I have a proxy server, but away I do not. I would like the correct proxy settings to load in each case. Currently, I use two different locations. This works acceptably, but I have to open my network settings and manually switch locations when my location changes. I have experimented with creating multiple ethernet ports. I can create a location with two ethernet ports, but I can't find a way to cause the correct one to activate. The first port in the search order is loaded even if the proxy is not found.
Please let me know if you can help with this. Thank you.

I'm not sure of another way to do what you want, but there should be a Location menu in the Apple menu. You don't need to open the network prefs to change locations.

Different Zoning configuration in a fabric?

Similar Messages

Maybe you are looking for