Digital@nywhere-ATSC installation

Digital@nywhere-ATSC BDA drivers won't install after trying to run the setup program. I have Window XP /SP2 with current updates (1/15/07). Is there a updated driver for the board (not 2005). Thanks

http://www.msi.com.tw/program/support/driver/dvr/spt_dvr_detail.php?UID=614&kind=10

Similar Messages

Remot Control For Digital@nywhere ATSC and Vista Don't Work Together Very Well

I have a Digital@nywhere ATSC tuner card w/remote.
On Windows XP, the remote worked ok. On Windows Vista, the remote works only some of the time.
On Windos XP, the BDA drivers and utilities on the install disk loaded fine. Not so with Vista.
On Vista, the utilities on the install disk seem to load fine, but the BDA drivers fail.
Loading the Vista Digital@nywhere utilities gets the tuner card to work, but has no drivers for the remote. Leaving me to load the utilities from the install disk, and and the BDA drivers from the Vista Digital@nywhere files. A rather tedious process, with the remote only functioning sometimes.
I have tried every trick I can think of to get the remote control and Vista to work together, to no avail. I'm stumped.
I'd rather not go out and buy a new tuner card, when the Digital@nywhere ATSC tuner card works fine on Vista. I'd just like to have a remote control that works fine too. But I don't.
I hope an answer can be found for this problem.
If I haven't been clear enough, just ask, and I'll try to explain things better.
Thanks for any help that anyone can give.

Are you using Media Center in Vista? If so, buy a Media Center remote, should work with no problems.

Digital@nywhere - ATSC : Channel does not stick while recording

Hi,
My TV input is cable (analog).
While recording a channel, the channel switches automatically after 5mn or so. I have to stop recording, reselect the channel, are restart recording. Yet again the channel switches after a similar delay.
Did anyone experience such issue? Any advice is greatly appreciated.
OS: XP Pro SP2
Intel Core Duo 2.4
2GB RAM
nVidia 7600 GT
Much thanks!
Benoit

Am I correct in assuming you are trying to use this card with cable TV input and not over the air? If so how do you have the cable connected? From reading the manual it looks as if this card is for over the air input not cable tho I could be wrong.
Are you able to watch TV (not recording) with it staying on channel?

TV@nywhere ATSC - Channel "locked" after viewing certain channels

Hello there.
I am having trouble with my TV@nywhere ATSC.
First of all, just the first two channels are properly detected. The other channels are just named "Program #", where # ranges from 3 to 24! (There are only about 5 ATSC channels here in Mexico).
Note that those first two channels work correctly.
When I change the channel to the one named "Program 3", a third channel is shown correctly, but then that channel gets "locked" so every single chanel (including the first two channels) shows that third channel. This situation can only be fixed by closing PowerCinema (the included program) and opening it again.
When I change the channel to any other than the first three, the image freezes and no further channel surfing is possible.
I already installed the most recent drivers from your site, but everything seems to be the same.
Also, I have installed the card on two different machines, and the behavior is also the same. (Video is just smoother on the faster machine)
Surprisingly, all channels can be perfectly seen (for a short time) while doing the channel scan.
I am looking forward to fix this problem since watching only two channels isn't exactly what I was looking for when I bought the tuner.
Thanks in advance,
Juan.

Quote
This situation can only be fixed by closing PowerCinema (the included program) and opening it again.
Quote
Windows XP MCE 2005 with Update Rollup 2 (and SP2)
you're using this card with PowerCinema AND Windows XP MCE2005? ???

Digital@nywhere and Windows 7

Hello all,
I have been using my Digital@nywhere card for a few years now, with no problems. However, as I upgraded my OS to Windows 7, after reinstalling the drivers and the software, the software does not run. Whenever I click on the TVR button, I get an error that says this: Access violation at address 0002111D in module 'kwusbdll.dll'. Read of address 0000000. And then I will have to close the program in the taskbar. I have tried to run the software in the compatibility mode of Windows XP to no success. I have also tried to reinstall the program using the setup found here: http://eu.msi.com/index.php?func=downloaddetail&type=driver&maincat_no=132&prod_no=642 but the problem is still there. Is there a way to fix this problem, or perhaps another DTVR application I can use?

Yes and yes.
I tried that program in the sticky, ScanChannelsBDA_UK, and when I choose my country (Australia) I get this error saying it failed to connect filters to graph. Here is the log if it helps:
Build - v2.8.1.0
Checking for new BDA DVB-T Cards
Tuner - Xpert BDA DVB-T Tuner/Demod
@device:pnp:\\?\stream#cxbdatune.ven_14f1.samsungdvbt#5&29d22fe9&4&1#{71985f48-1ca1-11d3-9cc8-00c04f7971e0}\{91b0cc87-9905-4d65-a0d1-5861c6f22cbf}
Finding Demod and Capture filters
Trying - Conexant 2388x Transport Stream Capture
@device:pnp:\\?\pci#ven_14f1&dev_8802&subsys_86231462&rev_05#4&23c0b1c&0&52f0#{fd0a5af4-b41d-11d2-9c95-00c04f7971e0}\global
Finished Finding Demod and Capture filters
Finished Checking for new BDA DVB-T Cards
Found BDA device: Xpert BDA DVB-T Tuner/Demod
Failed to connect Capture filter to BDA Demux
Failed to connect filters in graph.
Failed to connect Capture filter to BDA Demux
Failed to connect filters in graph.
Failed to connect Capture filter to BDA Demux
Failed to connect filters in graph.
Failed to connect Capture filter to BDA Demux
Failed to connect filters in graph.

HP Photosmart M627 Digital Camera Software Installation CD Compatible w/Windows 7

I switched from Windows XP to Windows 7 over a year ago, and the HP Photosmart M627 Digital Camera (Model L2420A) and the software CD originally installed was incompatible with Windows 7. Therefore, I haven't been able to upload pics from my camera to my computer to store and/or customize.
I have tried other photography software programs, however, I definitely prefer the software designed to work with my camera. Can anyone instruct on how to navigate the website (HP) to locate the same? Thanks in advance!
Dell Dimension 5100, Windows 7 Ultimate, Intel(R) Pentium 4CPU, 2.80GHz 2.79GHz, 200 mem, 32-bit OP,
SP1; Google/Firefox 29.0.
SweetFacz75
This question was solved.
View Solution.

Hi,
Please try Vista:
http://h10025.www1.hp.com/ewfrf/wc/product?cc=us&lc=en&product=1147860
otherwise using card reader on your computer to upload/copy/move photos from the SD card to your computer.
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Unable to run Digital Editions after installation

I installed Digital Editions 4.0 successfully under Windows XP, but it doesn't run when I click the icon. Nothing happens. What could be wrong?

Several versions of .NET are installed, 3, 3.5, 4, 4.0.
Thanks!

Aide de Digital Publishing Suite | Installation des outils de DPS

Cette question a été publiée en réponse à l’article suivant : http://helpx.adobe.com/fr/digital-publishing-suite/help/installing-digital-publishing-tool s.html

Hi, we've got a problem on this translated page (from french), the download links still contain the /fr/ inside, which leads to an error

Unable to Download Digital Edition

I just bought an ebook and need to download Digital Edition to read it, but am unable to download.
I clicked on the DOWNLOAD NOW link, but get an error loading the page message :
Webpage error details
User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; WOW64; Trident/4.0; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; Media Center PC 6.0)
Timestamp: Fri, 27 Jul 2012 10:34:08 UTC
Message: HTML Parsing Error: Unable to modify the parent container element before the child element is closed (KB927917)
Line: 0
Char: 0
Code: 0
URI: http://www.adobe.com/products/digitaleditions/
The URL that was directed to is : http://www.adobe.com/products/digitaleditions/#fp

You can download a standalone installer for ADE from - http://www.adobe.com/devnet/digitalpublishing.html (Look for the section on 'Digital Editions standalone installer').

Unable to download adobe digital edition on 64 bit browser

I tried Borders support staff and Adobe's. It appears that the preview flash player downloaded but still wasn't able to download the adobe digital edition. the message saying it needed the flashplayer continues to come up.

You can download a standalone installer for ADE from - http://www.adobe.com/devnet/digitalpublishing.html (Look for the section on 'Digital Editions standalone installer').

Tried to install itune 10 but when i plug the iphone to the usb it states that it's not digitally signed drivers, i'm using window 7

tried to install itune 10 but when i plug the iphone to the USB it states that it's not digitally signed drivers, installation failed and cant even do charging on the computer after that. i'm using window 7 please help!!

Hello raks99,
The article linked below details a number of steps that can help with getting your iPhone restored via iTunes.
If you can't update or restore your iPhone, iPad, or iPod touch
http://support.apple.com/en-us/HT201263
Cheers,
Allen

Where on my computer is my Adobe Digital Edition?

I recently downloaded and installed Adobe Digital Edition but I cannot find it on my computer under programs. Every time I want to open a book I have to download it again. Where do I look for this on my computer? Thanks.

Hi,
Which operating system is your computer running?
If you are using Windows, navigate to My Computer->C:->Program Files (or Program Files (x86) if running 64-bit version of Windows)->Adobe
In the Adobe folder, look for Digital Editions. In the Digital Editions folder you should see a digitaleditions.exe file.
Create a shortcut of this on your desktop and you should be able to launch digital editions by clicking on the icon in future.
In case you don't see the digital editions folder, I would recommend that you reinstall the software by using this link : Adobe Digital Editions
During installation, you will have the option to choose if you want to create a shortcut or add the application in your list of programs.
Hope this helps.

New MSI TV Tuner cards!

It seems as if MSI has or is about to launch some new TV tuner cards.
The TV@nywhere Plus (pictured left) looks like a new analogue TV tuner, possibly to replace the TV@nywhere Master card. It looks to use a new broadcast decoder chip, and includes new features such as auto-scan and naming of channels, and crucially the ability to power on your PC in order to commence a scheduled recording (as with the Compro Videomate card)
The Digital@nywhere (pictured centre) looks like the daddy. It is a Digital DVB-T card, which receives digital terrestrial TV signals through an ordinary aerial (like the Nova-T and Black Gold cards). There is no mention on this page, but I guess MSI would have been foolish not to make this product WinXP MCE compatible.
The Theater 550PRO (pictured right) is a high quality analogue TV tuner, with hardware MPEG encoder, allowing for DVD quality TV recordings. It is based on the ATI Theater 550PRO chipset, is bundled with CyberLink's PowerCinema software (yay no more shoddy Intervideo software!) and is also listed as being compatible with Windows XP Media Center Edition.
If anyone has seen these cards in action, or is lucky enough to own one, please add your comments here!!

well, I just bought an Asus, TV/FM card for my computer (the MSI anywhere plus one came out shortly after that), and gone through semi ton research. Basicaly the Theaterpro 550 are not just made by MSI, by also by Sapphire and Power Color as well (all came from ATI?), some ppl say the software (cyber one) is problematic, but several review I read says that it's all pretty good, if your installation and problem is not a problem, then you are most likely bug free. At, first I bought an Leadtek one (which in my opinion is better in term of software and hardware compare to the asus card I have) but unfortuntely, the card's FM fucntion is a bit buggy. Though Asus card's software function is not as versatile as the Leadtek (the close caption don't work in Canada only in US) but it's really good and stable enough for avg user who want to listen radio and watch TV on comp, and the remote that came with it is pretty nifty too (when I try it, the volume func won't work, it turns out that my Microsoft kyboard funct is blocking some commands) In terms of price range and spec, I think the MSI anywhere plus and Asus TV/FM card 7135 is nearly identical, the only expection is that MSI is 10 dollars cheaper, plus their remote is connected to card itself instead of using a USB slot from your comp. One of the obvious problem I know with TheaterPro550 type is that the box on the card heats up quickly and to quite a high temp as well, so good circulation in case is quite important (same with my Leadtek card). Those are the little nitpic I gathered during my search for TV/FM card, so some info could be false, so it's best to do your own research when purchase a card for yourself.

Data Recovery of Time Machine Backup From a Corrupted Drive

I had to install 10.2 and 9.2.2 on an internal drive in my 2003 MDD G4 but first I had to reformat it (and wipe out its data) since it did not have OS 9 drivers installed. No problem thinks I since its contents are backed up to my 500 GB Western Digital HD. Installation of 10.2/9.2.2 was successful but when I go back into 10.5.8 to restore the contents of the newly formatted drive the external drive with the Time Machine backup will not mount. It churns and grinds forever and nothing I've tried (after consulting the WD support web site) helps. It is recognized by Disk Utility but that is all.
Any thoughts on whether/how to recover the lost backup? Many thanks in advance.

mvaldeslora wrote:
Well, I am happy to report a happy ending. Turns out DW had crashed but I initiated the procedure again and it was able to rebuild the drive's directory in a couple of hours. Time Machine then recognized the drive and I was able to restore the contents of the drive on which I installed 10.2/9.2.2 earlier in this saga. I will reformat the external WD drive now and see how it performs before I decide whether it's a keeper or not. Thanks for all comments and observations.
Yay!
If those are your only backups, please do yourself a favor: do not trust them to that drive! Get a new one, and put TM backups on one, and use the other to regularly update a "clone" or at least home folder backups via CarbonCopyCloner, SuperDuper, or the like.
Murphy was an optimist!

Once again, I need help...I'm starting to hate this board

Ok, I'm going to start from the beginning. When I first built this computer last year, (specs at the bottom) everything ran seemlessly. I upgraded to WinXP and no problems. Then my hardrive started screwing up around mid-summertime. The computer would freeze, crash, ect. Various things. After doing some research, running diagnostics and calling IBM, it was decided that the drive had gone bad. So I took it out, and bought a new western digital. After installation of the drive, and installing XP on the newly formatted drive, I expected everything to work fine. It didn't. First, there were blue and black screens of death. Sometimes the blue screens would mention something about IRQ's not less or equal, sometimes something else. Sometimes the computer would just restart for no reason. So I reformatted again. This fixed the blue screen problem and for about a day, everything (I thought) was cool. Think again. To start, I couldn't run any 3d application for an extended period of time without it freezing. And if I set the CPU to 1.2 ghz (where it should be!) it gets even worse. I even tried uping the voltage a little. No help. Sometimes the computer would just (once again) restart for no reason. Especially while using winamp. I tried different drivers, different bioses, readjusting my fan on my cpu, running memtest86 (which showed the memory to be fine). I have read through MANY threads on the forums and tried many other things, with no luck. The current situation, after attempting to install WinXP servicepack 1 is that I cant even load Windows. It always gets to the point where the blue bar is moving across while it says WinXP, and then the computer restarts. I ran tests to check how the powersupply was running during use, nd all the numbers looked good. The thing that really pisses me off, is that everything use to work fine, before the IBM drive crashed. Guys, I need some expertise and a Beer. I can do the second one myself and will gladly get a case for whoever can help me straighten this out! Even if I just have some part that needs replaced, I just need answers! Thanks guys!
Athlon 1.2 ghz 266fsb
Msi nforce k7n420pro
300W powersupply
Integrated graphics
256 mb Crucial memory
yamaha 24x burner
kenwood 52x cdrom
floppy drive
d-link wireless network card (could this be a problem? I was having problems before I got this card)

All these guys with there power supply is a bunch of bunk and the combine this and that. a decent 300w psu will run the nforce with onboard vid or a geforce 3 easely. and forget all the combined crap.
Heres what my 300watt power could handle before I gave it to my kid.
MoBo.
1900xp
Geforce3
Scsi card
Modem
2- IBM 60 GB 7200rpm
Cold cathode ray tube 12"
CD ROM
Smart media reader
And whatever else I plugged into the usb port and the only time I ever had Maveric's problem, which I had the same thing was when switch system driver from 1.0 to 1.05 they gave me the same thing he is having. so I stayed with the 1.0 until the 1.13's came along and they worked well.
I suggest his is a driver issue IRQ not less then, Bksod or random restarts or other blue screen errors.
Try the 1.00's
Oh by the way now my kid uses my old 300watter on his 1900xp nforce machine, with all kind of toys and his is also stable. So Wonky and Athlonix quit suggesting that a 300psu is not sufficent when in fact it may work very well. oh and one more thing Athlonix GET OFF THE SOUND CARD THING!!! the onboard works, can't you get that in your head. Only yours doesn't every one elses does. can someone draw a picture of that
Jim.

Digital@nywhere-ATSC installation

Similar Messages

Maybe you are looking for