Direct GRN (non order items) to cost center for Non Stackable Materials

Hi All,
We can do direct GRN (non order items) to cost center for Non Stackable Materials.
If it is possible.Please advice me
Thanks In adance

Hi,
Your question is not clear.
Ok.
If you want to issue goods to cost center you can use 201 movement type.
If you want do create automatic PO in back ground during goods receipt, you can do it with customization. For automatic PO creation during goods receipt, you can search in SDN, you can get the answer.
Regards,
Biju K

Similar Messages

  • Purchase Order Field and Cost Center Field Non Editable In F-48

    Hi Friends,
    I have a cretain requirmnet to make the PO and cost centre field non editable.I tried through shd0 bt it says i can only cretae Transcation variats for Dialiog tran.Please help
    Regards,

    Hi,
    You can speak to your functional people. I think through SPRO "Maintain Field Status Variant' under Financial Accounting ->........
    we can control this.

  • Vendor opent items by cost center

    Hi all,
    we have one sap query for which we can get vendor open items by cost center. in this reort data has come from T.code FB60 and MIRO.
    Even though my client is asking before mentioned question, please check and let me know
    "That query shows all CC line items related to vendor documents that are still opened. I am missing the documents coming from a PO, which is hard to add in the query itself. So, I would suggest to create an ABAP."
    he was telling that " I am missing the documents coming from a  PO"  i did not get this sentence.
    could you please let me know
    Thanks in advance
    venu

    Hi Suresh,
    Thanks for your replay, if you dont mind could you please explain elaborate?
    That would be so grate for me.
    continue with earlier mail my client is asking to implement the below mentioned logic
    That query shows all CC line items related to vendor documents that are still opened. I am missing the documents coming from a PO, which is hard to add in the query itself. So, I would suggest to create an ABAP.
    Here is the logic
    Start from table bsik.
    Read table GLPCA with bukrs = bsik-burs
                    And GJAHR = bsik-GJAHR
                    And REFDOCNR = bsik- belnr.
    This will give all controlling line items (CC, order, WBS) coming from FI.
    If not found,
    Select single * from bkpf where bukrs = bsik-burs
                    And GJAHR = bsik-GJAHR
                    And belnr = bsik- belnr.
    Read table GLPCA with bukrs = bsik-burs
                    And GJAHR = bsik-GJAHR
                    And REFDOCNR = bkpf- AWKEY(10).
    This will give all controlling line items (CC, order, WBS) coming from Pos.
    Is it fullfuls?
    Thanks for your cooperation and i will assign the points
    Thnaks
    venu

  • Internal order posting vs cost center

    HI,
    I have a requirement like this; in our company we have allowed the posting to be made only through internal orders no
    direct cost center postings are allowed. Is there any report to carry out a comparison between internal order posting and cost center postings? I just want to check the transaction which directly posted to cost center instead of internal order.
    please help.
    thanks
    best regards
    gayani

    Hi,
    Do you want to trace postings which were done only on cost centres without I/O? You can go to KSB1 and select the line where Auxiliary account assignment is blank - this will mean that these lines were posted only to cost centre.
    Also, if your I/O are real one, you can select in KSB1 postigns with '4' value type, which will mean that the posting on cost centre is real and not statistical; therefore, no postings on I/O happened.
    Regards,
    Eli

  • Costs to be recorded to Internal Order instead of Cost Center

    Hi,
    My client has created a new Personnel Area and has started hiring people for it. They did not create a cost center for this. Meanwhile, if any costs are to be recorded for the employees in this Personnel Area, the client wants them record to an Internal Order (instead of Cost Center). Later, when they create a cost center, they may transfer the costs from Internal Order to the Cost Center.
    What needs to be done to satisfy this scenario.
    Best Regards,
    Veera

    hi
    create internal order through kO01, which is of type real order, and post all the expenses by keeping this internal order as cost object. later as you want to settle this internal order to cost centre, you should have settlement profile attached to the internal order to settle that. please update settlement profile while creating the internal order
    krishna

  • Integrate Employe with internal order other than cost center

    Dear Experts,
    Integrate Employe with internal order other than cost center
    Thanks & Regards,
    Mythili
    Edited by: Mythili.R on Jan 10, 2012 1:45 PM
    Edited by: Sikindar on Jan 10, 2012 6:23 PM

    Can use IT0027 at employee level or IT1018 at OM level

  • Internal orders/networks and Cost center

    is it correct to say, all internal orders and process orders will roll into a cost center at the end.
    Sri

    Hello Ganga,
    You can settle the costs collected on an internal order to one cost center, one G/L account, or one business process using one settlement cost element.
    Hene, it is not necessary that all internal orders will roll in to a cost centre at the end.
    Rgds
    manish

  • KSPP error: Plan/SOP order &: Reference to cost center/activity typ

    Dears,
    I need to know how to correct the error: "Plan/SOP order &: Reference to cost center/activity typ" that I received when I run the KSPP.
    Error code kp603.
    Thanks in advance
    KR
    Vincent

    Hi everbody,
    I found that when we have a formula in Resource -> Costing view but no quantity ( zero ) in Standard Value for operations (Master recipe) then we face the error.
    Other tips could be found in sapnote 1770587 and sapnote 380282.
    I hope this help to solve the issue.
    Regards

  • Non Order Items in MIGO Transaction

    Hi Experts,
    From starting to till now my client maintaining Non Order Items through MIGO Transaction. Now he wants stop that process.
    In MIGO Transaction he wants default gray mood the Non Order Items field. If that field is there in gray mood the users canu2019t do anything. Thatu2019s why he wants this process.
    Please advise me how I can overwrite this problem,
    Thanks in advance,
    Chandhu

    Non ordered items are normally accepted with movement type 511.
    You can block movement type 511 in configuration.
    Go to OMJJ- Movement type 511- Allowed transactions-Here Remove T-codes MIGO,MB01,MB0A,MB11 etc.
    Or Block that movement type through authorization.
    Edited by: Piyush Mishra on Dec 10, 2010 1:40 PM

  • Coste Center for Production Order

    Hi all,
    Can anyone please provide me the table details, which stores information on cost center for the PP orders and PM orders.
    Thanks in advance.
    Regards
    Prashant

    AFPO
    AFKO
    AUFM
    regards

  • LSMW - Direct Input - Sales order - item text

    Hi,
    I'm having a problem similar to the problem posted by Laurent Guilloteau on 2/3/2006 titled:
    LSMW - Direct Input - Sales order - item texts
    While this thread shows the issue as being answered, I'm not clear on what action to take.
    I'm using an LSMW with program RVINVB10 to load sales orders to SAP.
    I'm successfully loading the orders, including header level text, however the item text is not showing on the order.
    I have source structures defined as follows:
    Source Structures
           REC1                     VBAK - Header
               REC4                     VBPA - Order Partners
               REC6                     BTEXHKOM - Header Text Header
                   REC7                     BTEXLKOM - Header Text Lines
               REC2                     VBAP - Order Items
                   REC8                     BTEXHKOM - Item Text Header
                       REC9                     BTEXLKOM - Item Text Lines
                   REC3                     VBEP - Order Schedule Lines
    In actions 'Read Data' and 'Convert Data', I see text for the two text structures, at the header and item level. But after execution of Direct Input program, I don't see text in at the item level of the sales order, however I do see text at the header level.
    Does anyone have any insight on what's causing the item level text not to show on the order?
    Best regards,
    Stuart

    Hi all,
    Many thanks for the suggestions.  One of our expert developers got involved and provided the solution.
    In order to have item level text populate, the VBAP-PSTYV  (the sales document item category) field also needs to be populated.  The VBAP-PSTYV field value is dependent on the sales document type.  (Or, at least it is for the configuartion set up in my example)  The sales document type is VBAK-AUART.
    Stuart

  • Settlement receiver (cost center) for an PM order

    Hi Gurus,
    In which table I can find the settlement receiver (cost center) for an PM order??
    Thanks.

    Settlement distribution rules are stored in table COBRB.
    Regards
    Sreenivas

  • Best praxis for determining a  cost center for an HR org unit in PPM ?

    Hello all.
    We have defined the HR Org structure directly in PPM backend. Later the intention is that an interface should transfer this data from HR.
    The HR orgstructure defined works fine for the staffing process (with "resource manager via responsible organization"). 
    We have however run into some problems with the MLC & costing part.  The intention is to use manual MLC linking tasks/phases to PS WBS-elements (task based controlling).
    If we leave the org unit field blank in the cProject project project definition  we run into the message "No account assignment exists for the project defintion - no costing" and the systems rolls back from the assignment made.
    If we however assign an orgunit in the project defintion we instead get the message "No cost center could be determined for org unit 123...".
    <u>We therefore need to be able to determine a cost center for the Org Unit assigned to be able to proceed. How is this then best done?</u>
    There is a master cost center assigned to the orgunit in HR but not in PPM backend where this option does not seem to be available.
    With task based controlling the cost center does not really matter so it could possibly be hardcoded via a BADI (?) but is this really the way this should be done?
    Any suggestions?
    Thanks / Anders

    Hi and thanks for the reply.
    We will test with an ALE replicated structure so that the object ID becomes the same in the two systems as soon as possible.
    Pending that we will try the BADI option. Here I am however not sure what it is we really expect the BADI to do.  Which field should be populated with the cost center (the fields available are mainly project characteristics)?
    I also eventually found some information regarding this in the PPM 4.0 help.  I enclose info regarding this below.
    a) http://help.sap.com/saphelp_ppm400/helpdata/en/index.htm
    b) choose Collaboration projects>Accounting Integration>General Information about Accounting integration>Derivation of Organizational data.
    As I read this the system derives this as follows in case of task-based or role-based costing with no resource assignment:
    1) Look for the two BADIs mentioned to derive the cost center
    2) If no result there it looks for an org unit in the cProject header (where I assume having the Org Unit with the same Object ID in backend and ERP enables this option)
    3) If no result there the system looks for a "requesting cost center" in the account assignment object (WBS element or internal order)
    Regards / Anders

  • How to get the cost center for the retro balance.

    Hi All
    I have this report that gives the retro balance. I get the information from RT and BAL. The problem is it doesn't show the Cost Center for the retro amounts. C1 holds the current periods payments not the retro ones.
    Does any one know how can i get the Cost Center of the the amounts that wage type /552 is showing in the RT?
    Please Help!!!

    Hi
    I am not sure on the requirement. You are developing a FI report and accessing VA03 which is sales transaction. Anyway for getting cost center you can go to table VBAK,VBAP for line items.
    Hope solves ur problem
    Thiru

  • Should I create profit center for non-profit department?

    Dear Experts,
    Should I create profit center for non-profit department since I have cost-center for them (since I need to assgn the profit center in each cost center)?
    regards,
    Abraham

    Dear Abraham,
            You are saying that there is no Profit Generation in department. Then which Profit Center will handle the costs for this department. There should be a responsible Profit Center for this. Pl Check with your client.
    I'll give you one example:
    Basically Warehouse doesn't have revenue. But they have cost centers. All cost are beared by Head Office. In this situation.
    Cost Center belongs to Warehouse will maintained by Head Office Profit Center..
    Regards,
    Balaji Bhonsle

Maybe you are looking for

  • How do we track back the ABAP queries/report painter used to custom report?

    Hi Experts, I only have some ideas about report painter and ABAP query. If a company has a number of different Z reports in production. 1. How do we identify if it's report painter/writer or ABAP query?? 2. For ABAP query report, suppose that i can i

  • Why is the runFinalizersOnExit method in class System depricated?

    The explaination given in javadocs for deprication of runFinalizersOnExit in System class is that "It may result in finalizers being called on live objects while other threads are concurrently manipulating those objects, resulting in erratic behavior

  • Location Appliance Help required

    Hello, I have a WCS,WLC and LOC deployed. The integration betwen the WLC and WCS is working perfectly. We didn't put a lot of access points in the deployment because we didn't need acurate location tracking but at least we need some. The problem is t

  • I need help putting an old school style to see my files so I know where I am.

    How do I put horizontal and vertical lines in the files panel to keep track of where my files are? Previous versions had dotted lines that connected the files to a folder in the files panel, but CS5 only indents the files, no lines connecting anymore

  • Cannot connect: ORA-12505 error (listener does not know SID..)

    I have an Oracle 10g installation insde a VM with private IP (192.168.109.128) and I'm trying to access it from the host operating system with aqua data studio, but get ORA-12505 error (listener does not currently know of SID...). The identical error