Discontinue indicator on the MRP4 screen.

Hi,
I have "played" with the discontinue indicator on the MRP4 screen.
It seems that this is only applicable for dependent requirements (BOM items). My situation is a trading scenario so buying, stocking and selling.
I tried the following: created two materials one is the old and the other the new one. In the old material I have specified the discontinue indicator "1"; specified the follow up material as the new material and also specifeid the Eff-out date. The base unit of measure of both old and new materials are the same.
Now I created a sales order for the old material with a delivery date that's later then the date that the old material should be replaced. If I run MRP for the old material the requirement for the old material exists and is not transfered to the new material. If I run MRP for the new material I see nothing.
Kindly help me out with this issue.
Sincerely
Puja

Hello,
As far as I know, the discontinu indicator is wroking for dependent requirement only (sub-BOM item)
But if you have a sales order for a given material, discontinue indicator won't have any effect as you agreed with your customer to deliver him a specific material.
Nevertheless, there are some SD functionalities that may help to manage this scenario, such material catalog, ...
Regards

Similar Messages

HT4623 I have App Store updates indicated, but the update screen is blank. How can I retrieve updates?

I have App Store updates indicated, but the update screen is blank. How can I retrieve updates?

From Demo:
If you are getting the blank app update screen, many people are having this problem over the last couple of days.
According to Fly150 in another discussion, this will work.
If you want to update the Apps while waiting for Apple to fix Updates:
1. Go to App Store
2. Select Purchased
3. Select All
4. Scroll down to find the Apps showing update
5. Select update on the Apps
This should update the Apps and get rid of the update count in App Store. Apple needs to fix this. It is a workaround only until then.

I recently bought on iPod shuffle, I plugged it in as the directions indicated but the iTunes screen did not appear to sync...what am I doing wrong?

I recently purchase an Ipod shuffle. following the directions \, I plugged the small cord into the ipod and into the usb plug on my MAC. The instructions said that the Itunes screen would appear...but nothing happened. Am I missing something?

When you installed iTunes on your work computer, then connected your iPad to that computer, it wiped what was on the iPad, then put the iTunes library (nothing) from the work computer onto the iPad. You can try copying the iTunes folder from your home computer over to your work computer, but since the apps were bought with a different account, they may not load or update properly.

Indicator to include component scrap in the details screen of MFBF tcode

Hi ,
There is an indicator in the 'Details' screen of MFBF transaction to "Include Component scrap".
User has to select this indicator everytime he wants to include the component scrap or is there a way to save this setting ?
If it is defaulted from some config settings ..please let me know where it is maintained.
Your inputs would be highly appreciated.
Regards,
Sastry

Sastry,
You need to Implement the solution provided in OSS Notes#361630 for your requirement.
Regards,
Prasobh

Is there any way to keep the charge indicator bar onscreen in the lock screen in IOS7? And can I keep the call in progress screen up instead of going to wallpaper while a call is dialing?

IOS6 had a charge indicator bar on the lock screen that allowed me to see at a gance how much charge I had. Now it only flashes onscreen when I first connect the charger for about 1-2 seconds. I know the icon in the top right shows percentage, but it is too small to get an accurate look.
Also, when a call is in the progress of dialing my phone just shows the wall paper instead of the whole call control screen. I can hit the home button then hit the return to call bar at the top of the screen to get the control screen, but that is annoying to say the least. If I accidentally dial a number while navigating my contacts or one of the apps it takes several steps to cancell the call before completion.
I know my wallpaper may be pretty, but I don't need to see it while trying to use the phone instead of having control of the phone or seeing desired information (charge indicator).

I have a similar issue. Sound works okay but keep getting the app not optimized, you may experience a decrease in celluar strength. Verizon says it is a software issue. Apple says it is a hardware. Phone will niot synch to itunes to do any kind of reset.

Anyone Else Not Get New Message Indicator in the Messages Section of the Menu Screen?

I have been on the phone with Technical Support numerous times and they don't seem to have an answer to this question, so I thought I would see if anyone else has experienced this. And before anyone suggests this, technical support's answer has been to pull the plug on the box to reset it and this has not worked.
The issue is with the "Messages" portion of the "Menu" screen. I know Verizon does not offer a light on your STB to let you know you have a message. Instead, you are supposed to be able to go into the Menu screen and see the word "NEW" next to "Messages" along with the picture of an envelope to let you know you have a new message.
For whatever reason, I don't get either of these indicators. I never thought I had a message until I was at a friend's house and they went into their Menu and they had "NEW" next to their Messages along with the envelope indicator. I went home and saw that I had about five messages in my Messages box, some of which were very old.
While this is not a huge deal, it still bugs me that Verizon has no answer. I thought my STB may have an issue, but other than this, they work fine. (By the way, neither of my STB give me either indicator).
So I was just wondering if anyone else had this issue, and if so, how did you get it fixed? Did Verizon have to come out and do something, did Technical Support need to do something on their end, or did you need to get new STB? One time Technical Support tried to tell me that it may be an issue with Fios in my area, but that theory was shot down when I went to my friend's house. I have never gotten either indicator, and I have had Fios for almost one year.
I would appreciate any information you have. Thanks.
Solved!
Go to Solution.

VZ_Kim wrote:
Hi MiMeQu,
The indicator in the menu and the visual indicator on the front of the stb should both alert you of messages.
emphasis added in quote
It would be nice if the Verizon employees had the correct information when posting here. The indicator light hsa never been operational since I got TV service 3 1/2 years ago (as Matcarl said). The reason given by Verizon was "It confused too many users when the light came on and created excess calls to the FSC".
As for the envelope in the menu, mine used to work but also stopped working on my DVR (7216) about a month ago. To confuse matters my 2500s (2 of them) still show the envelope when there is a message.
If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem.

How to turn of Leopard Screen Sharing menu bar indicator in the target Mac?

How to turn of Leopard Screen Sharing menu bar indicator in the target computer?

On target computer go to system preferences>sharing>remote management. From here, select computer settings and uncheck box 'show remote management status in menu bar'.

My emac won't get past the grey screen with spinning indicator

before i went to bed last nite it was fine. when i woke up i click on the screen and got the little rainbow ball. that lasted for about 5-10 minutes so i had to push the button. when i try to turn it on now it gets to the grey screen with the spinning indicator but won't get past that. any help would be appreciated

An Archive and Install will preserve you user settings and data. You will need a minimum of 5 GB free on the hard drive to perform an A&I; you can reduce the space required by about 1 GB by selecting the option to install language support only for the language you use (assuming you don't need multiple languages).
However, after seeing your other post (BTW, it'll be easier to keep track if relted issues are in the same thread), you do not want to try an A&I if Disk Utility is reporting anything about 'could not be repaired'. Doing so will would ensure problems down the road, if it worked at all. It's possible for one disk problem to mask another. Whenever Disk Utility (or any other repair utility) reports making repairs, it's good practice to repeat the repair until it reports no problems found or it becomes clear it cannot repair the disk.
DiskWarrior has an excellent track record at repairing problems that Disk Utility cannot (especially Disk Utility versions prior to OS X 10.4.2).
If the drive cannot be repaired, you may be able to keep it by doing an erase install with the write zeros (one pass) option. That will update the hard drive firmware record of bad disk sectors to avoid using. If there are only a few bad sectors, that may let you keep using the hard drive for several more years. An erase install will do just that to your data, through. If you have access to another Mac with either a large amount of free disk space of a DVD burner, you can try using the other Mac as host and the eMac as target in FireWire target disk mode. You can run the host's copy of Disk Utility on the eMac hard drive, and hopefully be able to mount the emac HD so that you can back up the data in your Home directory.

I have connected my iphone5 to update the ios8 sofware, now it is stuck in the plug-n screen indicating itunes. the phone is not getting recognized when logged in to itunes on the computer

i have connected my iphone5 to update the ios8 sofware, now it is stuck in the plug-n screen indicating itunes. the phone is not getting recognized when logged in to itunes on the computer

Try this:
Check that your security software and settings aren't preventing your device from communicating with the Apple update server.
Then try to restore your iOS device two more times while connected with a cable, computer, and network you know are good.
Confirm that your security software and settings are allowing communication between your device and update servers.
If you still see the error message when you update or restore, contact Apple support.
copied from Resolve iOS update and restore errors

HT3964 my iMac won't boot up. I hear the chime and the Apple symbol appears but there is no whirling indicator that appears and after a while the computer screen goes black and the whole cycle starts again. There have been occasions when it has actually s

my iMac won't boot up. I hear the chime and the Apple symbol appears but there is no whirling indicator that appears and after a while the computer screen goes black and the whole cycle starts again. There have been occasions when it has actually started and I have the dashboard appear but then the screen freezes

Since you have Lion v10.7.4 installed, use Lion Recovery to repair the startup disk if necessary, or reinstall the Mac OS X.

Discontinuation indicator and follow up material.

Hi,
I am facing the strange issue for which i need your expertise. The requirement is like:
1. "X" material is discontinued and "Y" is as follow-up in two plants A & B. Discontinaution group and follow-up group has also been assigned in the BOM.
2. Now The client want to reverse the settings . means "Y" should be discontinued and "X" should be follow-up in both plants A & B.
Now I have removed the discontinuation indicator and follow up material from "X" in both plants. But when I am going to discontinue the "Y" material and putting " X" as a follow-up material, The system is giving the message "The specified follow-up material results in recursiveness
Message no. M3609
Diagnosis
You have entered a follow-up material. However, the BOM explosion for the follow-up material leads to the discontinued material, resulting in unpermissible recursiveness.
Procedure
Enter another follow-up material or cancel the entry.
Please suggest me where I am missing in my settings and what is the reason for this message.
Regards
Deepak Sharma

Dear ,
Check the following :
1.Validity of the Bill Of Material or any deletion flag is set in the present BOM.
2.Please check the following SAP notes :
Note 161742 - Consulting note: BOM recursion/low-level code 999
Note 839879 - Trace 'BOM is recursive'
Note 139517 - Recursiveness for follow-up materials
Note 42891 - Recursiveness check
Hope this will help you to figure it out
Regards
JH

My iphone 5(not S) screen popped out, the whole screen and digitizer, will they replace this if i go to the apple store?

my iphone 5 screen has been cracked but i recently dropped my phone again and the whole screenpopped out. its still attached by a black cord but now the whole screen is just black and i cant use it at all. will the apple store replace my screen or will i have to get a whole new iphone?

You may need to buy an entirely new iPhone. Before when the screen was just cracked you could have got an out of warranty replacement for a fee but now the screen has popped out and will most likely be classed as catastrophic damage.
At the link http://www.apple.com/support/iphone/service/faq/ it says:
What type of damages are not covered by my warranty?
Apple's Limited Warranty for iPhone excludes coverage for damage resulting from accident, disassembly, unauthorized service and unauthorized modifications. Please review the warranty for further details.
An iPhone that is ineligible for warranty service may be eligible for Out-of-Warranty (OOW) Service. For example, an iPhone that has failed due to damage or liquid damage is ineligible for warranty service but eligible for OOW service. However, certain damage is ineligible for OOW service, including catastrophic damage, such as the device separating into multiple pieces, and inoperability caused by unauthorized modifications. Please see Apple's Repair Terms And Conditions for further details. Refer to this article to check if the Liquid Contact indicator on your product has been triggered.
If your iPhone is not eligible for warranty service, you may wish to contact your carrier for other options.
So all you can do is take it into a Store and they will make the decision.

HT4061 My iPhone 5 will not turn on. I turned it off in the morning and when i went to turn it back on in the afternoon if wouldn't turn on. I plugged it in and it began flashing the startup screen with the apple logo on it. I tried to restore it but it c

My iphone wil not turn on. It wil only flash the start-up screen. I tried to restore it using itunes, but it said it was unable to restore.

Hello there, kmfoster1.
The following Knowledge Base article offers up some great steps for troubleshooting your issue:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/ts2802
Particularly:
Will not turn on, will not turn on unless connected to power, or unexpected power off
Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIsand corrosion.
Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
After at least 30 minutes, if:
The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
If the display turns on, go to step 4.
If the display remains black, go to next step.
Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
If the issue persists, and you are unable to restore your phone, this article provides
If you can't update or restore your iOS device
http://support.apple.com/kb/ht1808
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

[SOLVED] Gnome 3 == The Green Screen of Death

Greetings,
Trying to load GNOME 3 seems to result constantly in nothing but a bright green screen and mouse, despite anything else I've tried. Nothing else loads. I have to change tty to do anything else. Doing so, I executed htop and saw that only 2% of my CPU was being used, and the only thing from GNOME3 that was running was GDM.
These are the steps I have taken before posting in here....
1.) I followed the steps in the wiki for upgrading to GNOME3. Testing repo is the first repo.
----- That brought me into fallback mode but was missing many things. Upon investigation I saw that I had never fully installed GNOME 2 to begin with, that I only had XFCE and GNOME stuff that were brought in as dependecies to some other programs I had installed. So.....
2.) pacman -Rcns gnome followed by following the Wiki for installing from scratch.
----- Got the correct GDM (takes a while to load it), but only get the green screen with mouse cursor.
3.) Thinks and searches, "Hey I need pulseaudio... maybe that is why it isn't working." So I follow the wiki on installing pulseaudio.
----- Still, green screen
4.) Maybe, just maybe, it doesn't like the nouvela driver? So I change to nvidia.
----- Still, green screen
5.) Try another pacman -Syu.
----- Nothing new related to gnome 3 updates. Still green screen.
6.) Search frantically on google for anything related to GNOME 3 not loading or showing a green screen. Searched here as well.
----- Found nothing. Still has a freaking green screen upon reboot of system (thankfully I have laptop here to use while trying to figure this out but damn, I am getting aggravated by this frustrating issue).
EDIT: Just in case it is relevant, I am using the inittab method of loading GDM.
EDIT 2: Forgot to add, I also removed all old instances of gconf and gconfd and such in an attempt to solve the green screen.
Defeated, I come here. Does anyone have any advise, suggestions, etc or does this spell the end of GNOME 3 on my computer?
Last edited by mythus (2011-04-08 15:00:17)

Greetings,
I have solved this issue. The conflict was with firefox4-beta-opensuse. I replaced it with firefox from the official repositories, and *poof*, I am now in Gnome3 with Gnome shell.
LOL, yeah I tried those things which is what led me to the answer. Actually, it was the lack of libmozjs.so anywhere on my system combined with a google search indicating that it was supposed to be in xulrunner, yet it wasn't. That is what led me to re-uploading firefox completely so that I could do away with the beta xulrunner.
Did you still need that pacman -Qm list? I am going to assume no since it is solved, but who knows, you may have seen something else in my pastebin report as well. Anyways thanks!

When I burn my imovie I get the IDVD screen with a thumb size video playing in the corner of the screen without audio - weird

When I burn my imovie I get the IDVD screen with a thumb size video playing in the corner of the screen without audio - weird

You can find the serial number either in About this Mc in the Menu bar under the , or it should be on a sticker under the foot of the machine.
If you have the install discs, try booting from them, holding down the c key and then using Disk Utility to check the drive.
You can also boot into Safe mode
To start up into Safe Mode (to "Safe Boot"), do this:
   1. Be sure the computer is shut down.
   2. Press the power button.
   3. Immediately after you hear the startup tone, press and hold the Shift key.
      Tip: The Shift key should be held as soon as possible after the startup tone but not before.
   4. Release the Shift key when you see the gray Apple and progress indicator (looks like a spinning gear).
During the startup in Mac OS X 10.2 through 10.3.9, you will see "Safe Boot" on the Mac OS X startup screen.
During the startup in Mac OS X 10.4 or later, you will see "Safe Boot" on the login window, which appears even if you normally log in automatically.
Please post back with results,
To leave Safe Mode in any version of Mac OS X, restart the computer normally, without holding any keys during startup.

Discontinue indicator on the MRP4 screen.

Similar Messages

Maybe you are looking for