Discount Groups via the SDK. Not possible???

Hi All..
Can it really be true that you can't Create Discount Groups (Inventory > PriceList > Special Prices > Discount Groups) using the SDK???

Hi Rasmus,
It looks like you're right. I can only see special prices (OSPP) exposed via SDK and not OSPG.
Hope it helps,
Adele

Similar Messages

Changing CardCode via the SDK DI API

Forum,
I am trying to change a BP's Cardcode via the SDK DI API that I can change if I do it via the BP Screen inside SAP, but the update method is failing on the BP object and on getting the error message it is telling that "it already exists in the following tables" but does not in fact tell which tables.
Do you if it is possible to change the Cardcode via DI API?
The reason we need to be able to do this is that Leads have a certain style of CardCode ie L009988, but on conversion to a Customer the style changes
to reflect the Customer Name ie ABC Garages may become ABC142 and this needs to be record as well in all of still active non-SAP systems these are used to raised Invoices and Credit Notes.
Regards,
Juan

Once there is a transaction against a CardCode, it cannot be changed.

Apple ipad2 is recognized bei itunes in "wartungszustand". when i click reset on itunes and itunes tries to reset the ipad i get the information not possible with code 3194

Apple ipad2 is recognized bei itunes in "wartungszustand". when i click reset on itunes and itunes tries to reset the ipad i get the information not possible with code 3194

See if this helps : http://support.apple.com/kb/TS3694#error3194

VL10B via WM picking not possible

Dear all,
I am working on STO scenorio , via Vl10B i created delivery for STO purchase order, but when i am navigate through delivery document it went to VL03N and i am editing the delivery and i am able to pick if stoarge location not WM managed..
If storage is WM managed i am not able to create Transfer order via subsequent function, it is in display mode. i can proceed with LT03 & VL02N i can able to create transfer order.
so my requirement is i want to picking through navigation from VL10B. (it is possible for non WM managed stoarge location). how to active create transfer order in menu bar?
Thanks
Muthuraman>D

Hi,
It is because you have not maintained material in warehouse.this is the maine reason.if you maintaine the stock in warehouse then you can do it from VL10B.
so check it once.the material should create with warehouse views also.
if you want to see the exact error just you select the line item and click on icon "log for delivery creation" then one line item will be generated,select this and click on the button Notes,then you can see the error.
Thank you,

Retrieve contact list via the API not with the last updated date but created date?

I can connect via the API and retrieve a list of contacts but it seems that the only paramater i can pass is to search since the last Update Date.
Is it possible to search on the Created date and to have a date range as well?
I found the xml result is slow to come as it gives all entries since the "lastUpdateDate" entered.

A change in score does not cause the Date Modified field to change on the contact record. This field only changes when some data in one of the fields has changed.
However, some of the confusion can come from the fact that lead scores have a Profile and Engagement portion. So if you have certain fields on the profile section being modified, that would cause a rescore at the same time. Engagement criteria such as form submits often cause the contact record to be modified while website visits and email clicks/opens do not.
Hopefully this helps clarify,
Bojan

BI IP Executing planning sequence via process chain not possible

Hi,
we use BI IP and have defined a process chain (RSPC) with value type process planning sequence. When we execute it, we get error message
"Inconsistent input parameter (parameter: <unknown>, value <unknown>)"
When we execute this planning sequence via the modeller or via SE38 RSPLS_PLSEQ_EXECUTE everything works fine. I thougt the cause could be the user of the job itself (job is executed with different user, and variant of planning sequence is user-dependent!), but I changed the user in the job itself as well without results.
any thoughts?
regards
D
null

Hi,
I executed with my user and have a SAP_ALL authorization. Perhaps it could be because we use authorisation with the old method (4.0) (-> I'm not sure on this). I also think it has to do with authorization. I'll check this out with our authorization consultant.
D

How to capture "show on (Viewer) panel" via the SDK

I was able to capture other parameters such as - "Prompt text", "Default Value", "AllowCustomCurrentValues" -- from [[ReportClientDocument-DataDefControllerParameterField-DataDefinition-ParameterFields-ParameterField ]]
But I am not able to figure out where "show on (Viewer) Panel" resides in the SDK.
Thanks in advance
JM

Hi Jam,
While using RASSDK to retrieve and set "Show on (Viewer) panel" property of a Crystal Report parameter, we can use methods on ParameterField class.
Create an object of ReportClientDocument class for ex- ReportClientDoc and try the code
ReportClientDoc.getDataDefController().getDataDefinition.getParameterFields() (It returns Fields object which is collection on parameters).
Iterate through this collection and cast each individual object to ParameterField class.
- Call getIsEditableOnPanel().
It returns true if in CR Designer Show on (Viewer) panel is set to editable for the parameter.
It returns false if "Show on (Viewer) panel" is set to Read Only.
- Call getIsShownOnPanel().
It returns false if in CR Designer Show on (Viewer) panel is set to "Do not Show" and true otherwise.
Thanks,
Shilpi

How do you add a function to an existing Rules Dictionary via the SDK?

The how to SDK describes creating a new dictionary and adding functions and other items. However, in reading the Java API docs, it is not apparent how one would add a new function to an existing dictionary.
Once you have a reference to the RuleDictionary, there is a getDataModel method, but it returns a oracle.rules.sdk.datamodel.DataModel instead of the oracle.rules.sdk.editor.datamodel.DataModel. It appears that this DataMode class is different than the DataModel class in the editor sub-package. Further this DataModel class is not described in the API docs.
There is an addFunction method, but I do not see how to create an instance of the Function class.
Thanks,
Bret

Look at the oracle.rules.sdk.editor.datamodel.DataModel Constructor:
Constructor Summary
DataModel(RuleDictionary dict)
Constructor used to edit a datamodel.
So, the call would look something like:
RuleDictionary dict = ...;
oracle.rules.sdk.editor.datamodel.DataModel dm = new oracle.rules.sdk.editor.datamodel.DataModel(dict);

Video/Screen Sharing via 3G connection not possible - port restrictions?

I'm running Jabber-based iChat AV 5.0.3 sessions from my MBP connected to the Internet via a wireless USB modem 3G/UMTS (German Telekom D1 network). My buddies are connected to the Internet via regular broadband connections (DSL). I have set up a hosted Jabber server via Dreamhost (without SSL, port 5222 used).
Status Quo:
- Contact status of remote Jabber users shows up properly. All buttons (text chat, screen sharing, video) are available (not greyed out) on both sides.
- Text chat works fine.
- Video chat and screen sharing can be invoked from both sides (confirmation window shows up), but after confirmation the initiation process doesn't finish successfully. The video/screen sharing session doesn't run. *iChat AV shows a message indicating that it doesn't receive an answer from the remote user device.* If the iChat session is initiated from a buddy's computer, the buddy gets the same message respectively.
- For testing purposes, I changed the internet connection on my MBP from the mobile 3G USB modem to a regular *DSL broadband connection (same ISP, German Telekom). In this scenario, video/audio calls and screen sharing work flawlessly!* Therefore, I assume that the problems in 3G connection mode is caused by the ISP (German Telekom) blocking/restricting ports required by iChat AV for initiating the video call and streaming the data on their 3G network.
Is there any way to bypass ISP restrictions, by either changing specific iChat AV port settings on both ends (client devices) or by port forwarding? If yes, which settings should I change? Unfortunately, it's couldn't find any document indicating which ports are opened/allowed by German Telekom's 2G/3G (GSM/UMTS) network.
Below is an excerpt of the error message produced by iChat AV:
iChat Connection Log:
2010-11-09 21:18:19 +0100: AVChat started with ID 494414145.
2010-11-09 21:18:19 +0100: [email protected]: State change from AVChatNoState to AVChatStateWaiting.
2010-11-09 21:18:19 +0100: 0x1a8bf8b0: State change from AVChatNoState to AVChatStateInvited.
2010-11-09 21:18:28 +0100: 0x1a8bf8b0: State change from AVChatStateInvited to AVChatStateConnecting.
2010-11-09 21:18:28 +0100: [email protected]: State change from AVChatStateWaiting to AVChatStateConnecting.
2010-11-09 21:18:48 +0100: 0x1a8bf8b0: State change from AVChatStateConnecting to AVChatStateEnded.
2010-11-09 21:18:48 +0100: 0x1a8bf8b0: Error -8 (Did not receive a response from 0x1a8bf8b0.)
2010-11-09 21:18:48 +0100: [email protected]: State change from AVChatStateConnecting to AVChatStateEnded.
2010-11-09 21:18:48 +0100: [email protected]: Error -8 (Did not receive a response from 0x1a8bf8b0.)
Video Conference Error Report:
0.000000 @/SourceCache/VideoConference/VideoConference-415.22/Video Conference/DotMacConfiguration.m:1039 type=4 (FFFFFFFF/2)
[HTTP GET failed (0)]
0.000627 @/SourceCache/VideoConference/VideoConference-415.22/Video Conference/DotMacConfiguration.m:758 type=4 (FFFFFFFF/0)
[HTTP GET failed (0)]
0.346813 @/SourceCache/VideoConference/VideoConference-415.22/Video Conference/DotMacConfiguration.m:758 type=4 (FFFFFFFF/0)
[HTTP GET failed (0)]
1331.086051 @/SourceCache/VideoConference/VideoConference-415.22/SIP/SIP.c:2917 type=4 (900A0015/0)
[SIPConnectIPPort failed]
1333.086142 @/SourceCache/VideoConference/VideoConference-415.22/SIP/SIP.c:2917 type=4 (900A0015/0)
[SIPConnectIPPort failed]
1335.086270 @/SourceCache/VideoConference/VideoConference-415.22/SIP/SIP.c:2917 type=4 (900A0015/0)
[SIPConnectIPPort failed]
1337.086603 @/SourceCache/VideoConference/VideoConference-415.22/SIP/SIP.c:2917 type=4 (900A0015/0)
[SIPConnectIPPort failed]
1339.087985 @/SourceCache/VideoConference/VideoConference-415.22/SIP/SIP.c:2917 type=4 (900A0015/0)
[SIPConnectIPPort failed]
1341.088212 @/SourceCache/VideoConference/VideoConference-415.22/SIP/SIP.c:2917 type=4 (900A0015/0)
[SIPConnectIPPort failed]
1343.088361 @/SourceCache/VideoConference/VideoConference-415.22/SIP/SIP.c:2917 type=4 (900A0015/0)
[SIPConnectIPPort failed]
Video Conference Support Report:
929.446913 @/SourceCache/VideoConference/VideoConference-415.22/Video Conference/VCInitiateConference.m:2059 type=2 (00000000/0)
[Connection Data for call id: 1 returns 1
934.996640 @/SourceCache/VideoConference/VideoConference-415.22/Video Conference/VCInitiateConference.m:2074 type=2 (00000000/0)
[Prepare Connection With Remote Data - remote VCConnectionData: 1, local VCConnectionData: 1
935.002114 @/SourceCache/VideoConference/VideoConference-415.22/Video Conference/VCInitiateConference.m:2266 type=2 (00000000/0)
[Initiate Conference To User: u0 with Remote VCConnectionData: 1 with Local Connection Data: 1 conferenceSettings: 1]
935.467624 @/SourceCache/VideoConference/VideoConference-415.22/SIP/Transport.c:2138 type=1 (00000000/0)
[INVITE sip:user@rip:16402 SIP/2.0
Via: SIP/2.0/UDP lip:16402;branch=z9hG4bK0fdd30e326aa779b
Max-Forwards: 70
To: "u0" <sip:user@rip:16402>
From: "0" <sip:user@lip:16402>;tag=544473054
Call-ID: 9c7ecf46-ec3d-11df-8530-f81eeb5f4012@lip
CSeq: 1 INVITE
Contact: <sip:user@lip:16402>;isfocus
User-Agent: Viceroy 1.4
Content-Type: application/sdp
Content-Length: 708
Video Conference User Report:
928.427249 @:0 type=5 (00000000/16402)
[Local SIP port]
934.996832 @/SourceCache/VideoConference/VideoConference-415.22/Video Conference/VCInitiateConference.m:2171 type=5 (00000000/0)
*[Remote Router]*
*[PORT RESTRICTED]*
934.996842 @/SourceCache/VideoConference/VideoConference-415.22/Video Conference/VCInitiateConference.m:2173 type=5 (00000000/0)
[Remote CommNAT Result: 0x000000d0
936.003962 @:0 type=5 (00000000/60)
[Detected bandwidth (kbits/s): 2627 up, 2627 down. (00000000)
936.033015 @/SourceCache/VideoConference/VideoConference-415.22/Video Conference/VideoConferenceMultiController.m:2423 type=5 (00000000/0)
[Start Conference With UserID: u0]
978.787787 @:0 type=5 (00000000/16402)
[Local SIP port]
1014.011790 @/SourceCache/VideoConference/VideoConference-415.22/Video Conference/VCInitiateConference.m:2171 type=5 (00000000/0)
[Remote Router]
[PORT RESTRICTED]
1014.011800 @/SourceCache/VideoConference/VideoConference-415.22/Video Conference/VCInitiateConference.m:2173 type=5 (00000000/0)
[Remote CommNAT Result: 0x000000d0
1015.024555 @:0 type=5 (00000000/60)
[Detected bandwidth (kbits/s): 2627 up, 2627 down. (00000000)
1015.031800 @/SourceCache/VideoConference/VideoConference-415.22/Video Conference/VideoConferenceMultiController.m:2423 type=5 (00000000/0)
[Start Conference With UserID: u0]
1323.083386 @/SourceCache/VideoConference/VideoConference-415.22/Video Conference/VCInitiateConference.m:2171 type=5 (00000000/0)
[Remote Router]
[PORT RESTRICTED]
1323.083396 @/SourceCache/VideoConference/VideoConference-415.22/Video Conference/VCInitiateConference.m:2173 type=5 (00000000/0)
[Remote CommNAT Result: 0x000000d0
(…)

Hi,
Does this 3G device have any set up functions that are on your Mac ?
If it does not it is likely that it is wide open to all Port (65535 of them).
I presume that in System Preferences > Network you see a Public IP when using this device ?
Again this would tend to pint to all the ports being open.
Is there anything on the ISP's web site that suggests this device is unsuitable to be used with VoIP or SIP connections ?
VoIP (Voice over the Internet) uses the SIP connection process the way iChat does.
Most likely the issues is the way packets are sent.
When you do a download, for instance, do you find the speed increases in the first few minutes ?
When some data packets are sent over the Internet the next one is not sent until confirmation that the first has arrived.
This Latency effects Point to Point WiFi (antenna to Dish on House) and satellite connections mostly particularly when it is a two way thing.
It can effect Mobile/Cell phone type connections.
What sort of Speeds are you getting on the 3G device ?
http://www.speedtest.net/
Do these seem to get faster as the time proceeds ? (this can be difficult to spot).
The Log mentions one end being at just over 2Gbps although it does not make it clear which end.
As the Remote end is the end that reports "Router: Port Restricted" and it works over standard DSL we have to presume they have the ports open.
You could try restricting iChat 's Bandwidth in iChat menu > Preferences > Video Section to 500kbps (try it at both ends)
If that does not work try 200kbps
This may stop iChat from trying to send data too Fast for the Network Connections.
Realistically there are a few too many variables here.
It could be Speed of data throughout at the Initiation point. (Slow Start up of data transfer)
It could be an Internal setting preventing SIP.
It could be that the 3G network sends and receives data by different routes.
(I have seen this once when a ISP was repairing some Cabling. To maintain end user speeds they managed their own network to split Incoming and outgoing data to the end point.)
iChat does not like this as it checks the IPs and the Hops (number of intermediate stages/servers) and if the data is different it will not connect (Man in the Middle attack protection).
I can't remember the last time I knew of someone being successful with either an 3G USB dongle or a 3G phone as Modem (internet Sharing).
Despite my ideas I think you will be unlucky and this will not work.
10:31 PM Saturday; November 13, 2010
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"

Mono Audio signal: adjustment of the balance not possible

Dear all,
according to the IOS 5.0 User Guide, "Mono Audio" can be used to combine the left and right stereo channels into a mono signal played through both channels which works as expected.
In addition it should be possible to adjust the balance of the mono(!) signal for greater volume on the right or left. This would be very beneficial for me and others with a hearing loss at one ear, but doesn't work on my iPhone 4 as expected. It seems, that the balance setting is only effective in the 'Stereo' mode.
Any suggestions on how I can get this feature working on my iPhone are highly welcome.
Thanks,
Thomas

Dear all,
according to the IOS 5.0 User Guide, "Mono Audio" can be used to combine the left and right stereo channels into a mono signal played through both channels which works as expected.
In addition it should be possible to adjust the balance of the mono(!) signal for greater volume on the right or left. This would be very beneficial for me and others with a hearing loss at one ear, but doesn't work on my iPhone 4 as expected. It seems, that the balance setting is only effective in the 'Stereo' mode.
Any suggestions on how I can get this feature working on my iPhone are highly welcome.
Thanks,
Thomas

Camera sen in max, snaps in the vi not possible

Hi,
I have a slightly different question, my camera is seen in MAX and
works fine, but it's impossible to snap any pictures in a simple vi. I
changed already all the parameters, nothing happens. There must be
something wrong with this vi. But there isn't any error message.
Who can help me?
Attachments:
Kamera_guppy.vi ‏2812 KB

Hi,
first good that it is working in MAX
Ok, first thing you should try is delete trigger and shutter elements from your VI. Is it then working? When it is working then reduce shutter value.
Thanks,
Rebecca Fox
Rebecca Fox
Applications Engineer
National Instruments

Import of material groups into hierarchy not possible (note 432339)

Dear All,
I am trying to replicate material groups (DNL_CUST_PROD1) from R3 system. Prior to this our SRM system configured as standalone and Material Hierarchy is already defined. When I am trying to replicate the material groups in SMQ2 I am receiving status as "sysfail" and further I am getting above message. In the message the OSS note also mentioned. In the OSS note they have given following solution
Error message "Import of material groups into hierarchy &1 not possible":
In transaction COMM_PRAPPLCAT, you specify that the hierarchy specified in the error message is to be used for application 'Purchasing' (02). This means that the material groups would be created in this hierarchy. Delete this setting in Transaction COMM_PRAPPLCAT. If hierarchy R3MATCLASS already exists, assign
hierarchy R3MATCLASS to application 'Purchasing'. Then the material groups are created in hierarchy R3MATCLASS. If you want to import the material groups into the hierarchy specified in the error message, you can also keep this hierarchy
assigned to application 'Purchasing' and deactivate the error message. Error message "Import of material types into hierarchy &1 not possible". You can do this in Customizing under 'Customer Relationship Management -> Master data -> Basic settings -> Define system message characteristics'.
My problem is I am not able to find out the path given in the OSS note ( i.e, Customer Relationship Management u2013 Master data) . Any one can help me in this regard ?
with regards
Ram

Hi ram
one upon a time supplier relation ship management and customer relation ship management comes under EBP node i.e ebp 3.5 versions.
/people/marcin.gajewski/blog/2007/02/05/how-to-replicate-material-master-from-r3-to-srm
plz visit Marchin blog to.o
since u r aleady in standalone but now you may try push material group from ecc to srm .
so you need to do set up all crm middleware settings in ecc and srm.
br
muthu

Message received when openning the Adobe Premiere Elements 12 "Not possible to initialize on-line services" What do I have to do?

Hello,
How can I fix this problem?
Message received when openning the Adobe Premiere Elements 12 "Not possible to initialize on-line services" What do I have to do?
Thanks in advence,
FL

FLOureiro
What computer operating system is your Premiere Elements 12 running on? Have you updated 12 to 12.1 Update using an opened project's Help Menu/Update? If not, please do so.
For your immediate issue, have you update the Online Services in preferences?
Where are you in the program when you get the message "Not possible to initialize on-line services".
Are you in a country outside of the USA?
There certain online services that are just not available outside the USA.
Please review and consider and then, based on your details, we will consider what next.
Thank you.
ATR

DTW Discount groups

Hello
is there a template in DTW to upload special prices based on discount groups?
Thank you
Edited by: Philip Eller on May 16, 2008 8:53 AM

Hello
Thank you for the answer but I am not sure it does answer to my question
I have a list of customer over 200
The price list is properties dependant (not based on validity period or quantity) where you need to define a discount %age
In total that makes over 600 entries so the transaction to use is discount group but I can not find a template for that...
It seems that it is not possible via DTW ? Anyone has a solution
Thanks
Guillaume

Unable to find Active Directory Domain Groups via /_vti_bin/UserGroup.asmx GetRoleCollectionFromGroup

Hi, I am writing a Powershell script locally on my machine to aggregate data from SharePoint 2010 and Active Directory. All groups in our SP environment are Active Directory Domain Groups (AD DG). Accessing group members via SharePoint is not
possible (as many of you already know). My plan was to pull Domain Group lists and aggregate AD DG data with SharePoint data (permission levels, etc...). I unfortunately ran into a problem when I realized that AD DGs are not considered "SP
Groups" but instead are considered user???
How do I leverage SharePoint web services to perform an action similar to /_vti_bin/UserGroup.asmx > GetRoleCollectionFromGroup? I do not want to perform this action on the server, but locally on my machine. When I run the below script
it throws a 401 error and complains it "can't find the group". Keep in mind I am trying to get info on a
AD Domain Group, not a
SharePoint Group. I think that is the underlying reason this request keeps failing as I tested the below script on SP groups and it worked perfectly.
clear
$CRED = Get-Credential
[System.Net.ServicePointManager]::ServerCertificateValidationCallback = { $true }
$uri = "http://{site}/_vti_bin/UserGroup.asmx"
$soap = '<?xml version="1.0" encoding="utf-8"?>'
$soap+= '<soap:Envelope xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/">'
$soap+= '<soap:Body>'
$soap+= '<GetRoleCollectionFromGroup xmlns="http://schemas.microsoft.com/sharepoint/soap/directory/">'
$soap+= '<groupName>TestGroup</groupName>'
$soap+= '</GetRoleCollectionFromGroup>'
$soap+= '</soap:Body>'
$soap+= '</soap:Envelope>'
[xml]$WF = Invoke-RestMethod $uri -Credential $CRED -Method POST -ContentType "text/xml" -Body $soap
echo $WF
$WF.Envelope.Body.GetRoleCollectionFromGroupResponse.GetRoleCollectionFromGroupResult.GetRoleCollectionFromGroup.Roles.Role
Thank you.

Hi, I am writing a Powershell script locally on my machine to aggregate data from SharePoint 2010 and Active Directory. All groups in our SP environment are Active Directory Domain Groups (AD DG). Accessing group members via SharePoint is not
possible (as many of you already know). My plan was to pull Domain Group lists and aggregate AD DG data with SharePoint data (permission levels, etc...). I unfortunately ran into a problem when I realized that AD DGs are not considered "SP
Groups" but instead are considered user???
How do I leverage SharePoint web services to perform an action similar to /_vti_bin/UserGroup.asmx > GetRoleCollectionFromGroup? I do not want to perform this action on the server, but locally on my machine. When I run the below script
it throws a 401 error and complains it "can't find the group". Keep in mind I am trying to get info on a
AD Domain Group, not a
SharePoint Group. I think that is the underlying reason this request keeps failing as I tested the below script on SP groups and it worked perfectly.
clear
$CRED = Get-Credential
[System.Net.ServicePointManager]::ServerCertificateValidationCallback = { $true }
$uri = "http://{site}/_vti_bin/UserGroup.asmx"
$soap = '<?xml version="1.0" encoding="utf-8"?>'
$soap+= '<soap:Envelope xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/">'
$soap+= '<soap:Body>'
$soap+= '<GetRoleCollectionFromGroup xmlns="http://schemas.microsoft.com/sharepoint/soap/directory/">'
$soap+= '<groupName>TestGroup</groupName>'
$soap+= '</GetRoleCollectionFromGroup>'
$soap+= '</soap:Body>'
$soap+= '</soap:Envelope>'
[xml]$WF = Invoke-RestMethod $uri -Credential $CRED -Method POST -ContentType "text/xml" -Body $soap
echo $WF
$WF.Envelope.Body.GetRoleCollectionFromGroupResponse.GetRoleCollectionFromGroupResult.GetRoleCollectionFromGroup.Roles.Role
Thank you.

Discount Groups via the SDK. Not possible???

Similar Messages

Maybe you are looking for