Discovery of APs
How can I discover lightweight 1131AG Access Point using 2106 WLAN Controller.
Hi Friend,
You have to first configure your 2106 WLC with management ip address/mask and gateway and vlan number and then connect your LWAPP AP on infra switch connected to 2106 controller in same vlan and it will join your WLC.
On the other hand if you want your APs to be in different vlan than management subnet defined on your controller then you have to configure either DHCP option 43 or make them learn your controller management ip address via DNS.
You can also have a look at this link
http://www.cisco.com/univercd/cc/td/doc/product/wireless/control/c44/ccfig41/c41lwap.htm#wp1105242
HTH
Ankur
*Pls rate all helpfull post
Similar Messages
-
Cisco Prime LMS 4.1 - Do access points use up a node count license?
Hi Everyone,
I wish to purchase Cisco Prime LMS 4.1, particularly Cisco part # R-LMS-4.1-500-K9 which support 500 Cisco nodes.
We have about 360 Cisco switches/routers/ASA/FWs/WLCs so the 500 nodes license would seem to suffice for now & for future growth.
We also have about 200 lightweight APs that are managed & monitored by our WLC/WCS/Navigator environment.
According to the device support documentation for LMS, it supports and I assume will auto-discover these APs.
Does that mean these APs will use up node licenses on LMS even though management of the APs is done by WLC/WCS? If so is there an easy way to suppress discovery of APs by LMS so we don’t have to purchase extra node licenses for LMS? Or, does LMS offer additional support features for wireless APs not already offered by WLC/WCS/Navigator?
Just trying to understand how many network node licenses for LMS I have to purchase.
Thanks in advance for your help,
Ian.Thanks but I just heard back from my Cisco SE and he assures me that an AP will NOT use up a license.
I've asked him to verify his answer for me.
Is your answer based on real world expereince (the best there is)? That is, are you running Prime LMS 4.1 and does it indeed use up a license for each light-weight AP it discovers & manages?
Thanks for mentioning options 1-3 but I do not wish to employ any of them. I don't mind buying the additional licenses for APs ... I just need to know if I have to or not.
Ian. -
3702i AP's not Joining WLC - Layer 3 discovery request not received on management VLAN
Hi Guys,
This is a follow up post to this thread: https://supportforums.cisco.com/discussion/12400481/3702i-not-joint-2504
Have been playing around with my AP's and made sure the time is correct on all the devices ( WLC and Switch). I have also moved the AP's to the same Vlan as the management IP of the WLC.
if I move the AP's to the same Vlan as the WLC they join and are happy, as soon as I move them to a different Vlan they cant join and there time goes back to the default plus they do not seem to save the WLC details to flash but still remember the test names I give them.
it appears that option 43 is working fine as I can see it look for the WLC IP and I have done some trouble shooting on the WLC and it looks like it see's the AP but doesn't except it.
please see below for the boot up of the AP and the WLC logs:
AP
IIOS Bootloader - Starting system.
*** deleted for breverity *****
Loading "flash:/ap3g2-k9w8-mx.153-3.JA1/ap3g2-k9w8-mx.153-3.JA1"...#########################
File "flash:/ap3g2-k9w8-mx.153-3.JA1/ap3g2-k9w8-mx.153-3.JA1" uncompressed and installed, entry point: 0x2003000
executing...
Secondary Bootloader - Starting system.
Montserrat Board
*** deleted for breverity *****
Boot CMD: 'boot flash:/ap3g2-k9w8-mx.153-3.JA1/ap3g2-k9w8-xx.153-3.JA1;flash:/ap3g2-k9w8-mx.153-3.JA1/ap3g2-k9w8-xx.153-3.JA1'
Loading "flash:/ap3g2-k9w8-mx.153-3.JA1/ap3g2-k9w8-xx.153-3.JA1"...###############################################
File "flash:/ap3g2-k9w8-mx.153-3.JA1/ap3g2-k9w8-xx.153-3.JA1" uncompressed and installed, entry point: 0x1003000
executing...
*** deleted for breverity *****
cisco AIR-CAP3702I-Z-K9 (PowerPC) processor (revision A0) with 376810K/134656K bytes of memory.
Processor board ID FGL1838X4T1
PowerPC CPU at 800Mhz, revision number 0x2151
Last reset from power-on
LWAPP image version 8.0.110.0
1 Gigabit Ethernet interface
2 802.11 Radios
32K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address: F4:4E:05:B7:1E:84
Part Number : 73-15243-01
PCA Assembly Number : 000-00000-00
PCA Revision Number :
PCB Serial Number : FOC18343WPR
Top Assembly Part Number : 068-05054-03
Top Assembly Serial Number : FGL1838X4T1
Top Revision Number : A0
Product/Model Number : AIR-CAP3702I-Z-K9
% Please define a domain-name first.
Press RETURN to get started!
*Mar 1 00:00:19.295: %SOAP_FIPS-2-SELF_TEST_IOS_SUCCESS: IOS crypto FIPS self test passed (15)
*Mar 1 00:00:19.755: Registering HW DTLS
*Mar 1 00:00:19.763: APAVC: Initial WLAN Buffers Given to System is 2500
*Mar 1 00:00:19.815: APAVC: WlanPAKs 42878 RadioPaks 42270
*Mar 1 00:00:22.127: %LINK-6-UPDOWN: Interface GigabitEthernet0, changed state to up
*Mar 1 00:00:26.055: %SOAP_FIPS-2-SELF_TEST_RAD_SUCCESS: RADIO crypto FIPS self test passed on interface Dot11Radio 0 (4)
*Mar 1 00:00:26.167: Loading Power Tables from ram:/Q2.bin. Class = A
*Mar 1 00:00:26.167: record size of 3ss: 1168 read_ptr: 4F9698E
*Mar 1 00:00:31.207: %SOAP_FIPS-2-SELF_TEST_RAD_SUCCESS: RADIO crypto FIPS self test passed on interface Dot11Radio 1 (4)
*Mar 1 00:00:31.251: Loading Power Tables from ram:/Q5.bin. Class = Z
*Mar 1 00:00:31.251: record size of vht: 2904 read_ptr: 4F9698E
*Mar 1 00:00:31.407: Wait until the stile protocol list is initialized.
*Mar 1 00:00:32.651: Start STILE Activation
*Mar 1 00:00:34.571: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0, changed state to down
*Mar 1 00:00:35.447: %SYS-5-RESTART: System restarted --
Cisco IOS Software, C3700 Software (AP3G2-K9W8-M), Version 15.3(3)JA1, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2014 by Cisco Systems, Inc.
Compiled Fri 19-Dec-14 11:20 by prod_rel_team
*Mar 1 00:00:35.447: %SNMP-5-COLDSTART: SNMP agent on host Test_1 is undergoing a cold start
*Mar 1 00:00:36.563: %LINEPROTO-5-UPDOWN: Line protocol on Interface BVI1, changed state to up
*Mar 1 00:00:37.787: %LINK-6-UPDOWN: Interface Dot11Radio0, changed state to uplwapp_crypto_init: MIC Present and Parsed Successfully
*Mar 1 00:00:37.939: %SSH-5-ENABLED: SSH 2.0 has been enabled
*Mar 1 00:00:37.939: %LINK-6-UPDOWN: Interface Dot11Radio1, changed state to up
*Mar 1 00:00:38.987: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to down
*Mar 1 00:00:38.987: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed state to down
*Mar 1 00:00:47.567: %LINK-6-UPDOWN: Interface BVI1, changed state to down
*Mar 1 00:00:48.567: %LINEPROTO-5-UPDOWN: Line protocol on Interface BVI1, changed state to down
*Mar 1 00:00:50.431: %SOAP_FIPS-2-SELF_TEST_HW_SUCCESS: HW crypto FIPS self test passed (2-16)
*Mar 1 00:00:50.431: DPAA Initialization Complete
*Mar 1 00:00:50.431: %SYS-3-HARIKARI: Process DPAA INIT top-level routine exited
*Mar 1 00:00:51.431: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0, changed state to up
*Mar 1 00:00:53.435: %LINK-6-UPDOWN: Interface BVI1, changed state to up
*Mar 1 00:00:53.867: Currently running a Release Image
*Mar 1 00:00:54.287: Incorrect certificate in SHA2 PB !
*Mar 1 00:00:54.287: Using SHA-1 signed certificate for image signing validation.
*Mar 1 00:00:54.575: %LINEPROTO-5-UPDOWN: Line protocol on Interface BVI1, changed state to up
*Mar 1 00:00:59.787: %DHCP-6-ADDRESS_ASSIGN: Interface BVI1 assigned DHCP address 10.1.20.2, mask 255.255.255.0, hostname Test_1
*Mar 1 00:01:02.707: APAVC: Succeeded to activate all the STILE protocols.
*Mar 1 00:01:02.707: APAVC: Registering with CFT
*Mar 1 00:01:02.707: APAVC: CFT registration of delete callback succeeded
*Mar 1 00:01:02.707: APAVC: Reattaching Original Buffer pool for system use
*Mar 1 00:01:02.707: Pool-ReAtach: paks 42878 radio42270
%Default route without gateway, if not a point-to-point interface, may impact performance
*Mar 1 00:01:10.103: AP image integrity check PASSED
*Mar 1 00:01:10.187: Incorrect certificate in SHA2 PB !
*Mar 1 00:01:10.203: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to reset
*Mar 1 00:01:10.203: %LINK-5-CHANGED: Interface Dot11Radio1, changed state to reset
*Mar 1 00:01:11.591: %CDP_PD-4-POWER_OK: 15.4 W power - NEGOTIATED inline power source
*Mar 1 00:01:12.691: %LINK-6-UPDOWN: Interface Dot11Radio0, changed state to up
*Mar 1 00:01:13.691: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to up
*Mar 1 00:01:13.947: %LINK-6-UPDOWN: Interface Dot11Radio1, changed state to up
*Mar 1 00:01:14.947: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed state to up
*Mar 1 00:01:20.211: %SYS-6-LOGGINGHOST_STARTSTOP: Logging to host 255.255.255.255 port 514 CLI Request Triggered
Translating "CISCO-CAPWAP-CONTROLLER"...domain server (255.255.255.255)
*Mar 1 00:01:31.215: %CAPWAP-5-DHCP_OPTION_43: Controller address 10.1.1.231 obtained through DHCP
*Mar 1 00:02:11.599: %CDP_PD-4-POWER_OK: Full power - NEGOTIATED inline power source
*Mar 1 00:02:11.603: %LINK-6-UPDOWN: Interface Dot11Radio0, changed state to down
*Mar 1 00:02:11.611: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to reset
*Mar 1 00:02:12.603: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to down
*Mar 1 00:02:12.639: %LINK-6-UPDOWN: Interface Dot11Radio0, changed state to up
*Mar 1 00:02:12.647: %LINK-6-UPDOWN: Interface Dot11Radio1, changed state to down
*Mar 1 00:02:12.655: %LINK-5-CHANGED: Interface Dot11Radio1, changed state to reset
*Mar 1 00:02:13.639: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to up
*Mar 1 00:02:13.647: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed state to down
*Mar 1 00:02:13.699: %LINK-6-UPDOWN: Interface Dot11Radio1, changed state to up
*Mar 1 00:02:14.699: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed state to up
Not in Bound state.
*Mar 1 00:02:44.719: %CAPWAP-3-DHCP_RENEW: Could not discover WLC. Either IP address is not assigned or assigned IP is wrong. Renewing DHCP IP.
*Mar 1 00:02:49.839: %DHCP-6-ADDRESS_ASSIGN: Interface BVI1 assigned DHCP address 10.1.20.3, mask 255.255.255.0, hostname Test_1
Translating "CISCO-CAPWAP-CONTROLLER"...domain server (255.255.255.255)
*Mar 1 00:02:55.719: %CAPWAP-5-DHCP_OPTION_43: Controller address 10.1.1.231 obtained through DHCP
Not in Bound state.
*Mar 1 00:03:59.219: %CAPWAP-3-DHCP_RENEW: Could not discover WLC. Either IP address is not assigned or assigned IP is wrong. Renewing DHCP IP.
*Mar 1 00:04:04.343: %DHCP-6-ADDRESS_ASSIGN: Interface BVI1 assigned DHCP address 10.1.20.4, mask 255.255.255.0, hostname Test_1
Translating "CISCO-CAPWAP-CONTROLLER"...domain server (255.255.255.255)
*Mar 1 00:04:10.223: %CAPWAP-5-DHCP_OPTION_43: Controller address 10.1.1.231 obtained through DHCP
WLC:
isco Controller) >show time
Time............................................. Tue Jan 27 17:44:47 2015
Timezone delta................................... 0:0
Timezone location................................ (GMT +8:00) HongKong, Bejing, Chongquing
NTP Servers
NTP Polling Interval......................... 3600
Index NTP Key Index NTP Server NTP Msg Auth Status
1 0 150.101.176.226 AUTH DISABLED
(Cisco Controller) >show ap join stats summary
Incorrect input! Use 'show ap join stats summary [all/<ap-mac>]'
(Cisco Controller) >show ap join stats summary all
Number of APs.............................................. 2
Base Mac AP EthernetMac AP Name IP Address Status
f4:4e:05:aa:a6:a0 f4:4e:05:94:c3:98 APf44e.0594.c398 10.1.1.22 Joined
f4:4e:05:b6:ce:f0 N A Test_1 10.1.20.7 Not Joined
(Cisco Controller) >show ap join stats detailed f4:4e:05:b6:ce:f0
Sync phase statistics
- Time at sync request received............................ Not applicable
- Time at sync completed................................... Not applicable
Discovery phase statistics
- Discovery requests received.............................. 45
- Successful discovery responses sent...................... 21
- Unsuccessful discovery request processing................ 24
- Reason for last unsuccessful discovery attempt........... Layer 3 discovery request not received on management VLAN
- Time at last successful discovery attempt................ Jan 27 17:45:49.705
- Time at last unsuccessful discovery attempt.............. Jan 27 17:45:49.705
Join phase statistics
- Join requests received................................... 0
- Successful join responses sent........................... 0
- Unsuccessful join request processing..................... 0
- Reason for last unsuccessful join attempt................ Not applicable
- Time at last successful join attempt..................... Not applicable
- Time at last unsuccessful join attempt................... Not applicable
Configuration phase statistics
--More-- or (q)uit
- Configuration requests received.......................... 0
- Successful configuration responses sent.................. 0
- Unsuccessful configuration request processing............ 0
- Reason for last unsuccessful configuration attempt....... Not applicable
- Time at last successful configuration attempt............ Not applicable
- Time at last unsuccessful configuration attempt.......... Not applicable
Last AP message decryption failure details
- Reason for last message decryption failure............... Not applicable
Last AP disconnect details
- Reason for last AP connection failure.................... Not applicable
- Last AP disconnect reason................................ Not applicable
Last join error summary
- Type of error that occurred last......................... Lwapp discovery request rejected
- Reason for error that occurred last...................... Layer 3 discovery request not received on management VLAN
- Time at which the last join error occurred............... Jan 27 17:45:49.705
AP disconnect details
- Reason for last AP connection failure.................... Not applicable
Ethernet Mac : 00:00:00:00:00:00 Ip Address : 10.1.20.7
(Cisco Controller) >show interface summary
Number of Interfaces.......................... 4
Interface Name Port Vlan Id IP Address Type Ap Mgr Guest
ap LAG 20 10.1.20.231 Dynamic No No
guest LAG 30 10.1.30.231 Dynamic No No
management LAG 10 10.1.1.231 Static Yes No
virtual N/A N/A 1.1.1.1 Static No No
SWITCH
witch#show run
Building configuration...
*** deleted for breverity *****
no aaa new-model
clock timezone AWST 8
system mtu routing 1500
ip routing
ip dhcp pool WAP_Pool
network 10.1.20.0 255.255.255.0
default-router 10.1.20.1
option 43 hex f104.0a01.01e7
ip dhcp pool Clients
network 10.1.30.0 255.255.255.0
default-router 10.1.30.1
dns-server 203.0.178.191
ip dhcp pool test
network 10.1.1.0 255.255.255.0
default-router 10.1.1.1
crypto pki trustpoint TP-self-signed-4082587776
enrollment selfsigned
subject-name cn=IOS-Self-Signed-Certificate-4082587776
revocation-check none
rsakeypair TP-self-signed-4082587776
*** deleted for breverity *****
*** deleted for breverity ***** !
interface FastEthernet0/3
description *** WLC ****
switchport trunk encapsulation dot1q
switchport mode trunk
interface FastEthernet0/4
description **** AP *****
switchport access vlan 20
switchport mode access
spanning-tree portfast
interface FastEthernet0/5
description **** AP ****
switchport access vlan 20
switchport mode access
spanning-tree portfast
interface FastEthernet0/6
i*** deleted for breverity ***** !
interface Vlan10
description *** Managment ***
ip address 10.1.1.230 255.255.255.0
interface Vlan20
description *** WIRELESS APS ***
ip address 10.1.20.1 255.255.255.0
interface Vlan30
ip address 10.1.30.1 255.255.255.0
ip classless
ip route 0.0.0.0 0.0.0.0 10.1.1.1
ip http server
ip http secure-server
ip sla enable reaction-alerts
l*** deleted for breverity *****
ntp clock-period 36028827
ntp source FastEthernet0/1
ntp server 121.0.0.42
ntp server 202.127.210.37
end
I have also placed a Device in Vlan 20 and it is able to ping the WLC and the WLC can ping it s routing is working.
ThanksHey Scott,
I gave that a shot and still no luck, log's from AP boot up:
IIOS Bootloader - Starting system.
flash is writable
Tide XL MB - 40MB of flash
Xmodem file system is available.
flashfs[0]: 67 files, 9 directories
flashfs[0]: 0 orphaned files, 0 orphaned directories
flashfs[0]: Total bytes: 41158656
flashfs[0]: Bytes used: 20894208
flashfs[0]: Bytes available: 20264448
flashfs[0]: flashfs fsck took 20 seconds.
Base Ethernet MAC address: f4:4e:05:b7:1e:84
Ethernet speed is 100 Mb - FULL Duplex
Loading "flash:/ap3g2-k9w8-mx.153-3.JA1/ap3g2-k9w8-mx.153-3.JA1"...#########################
File "flash:/ap3g2-k9w8-mx.153-3.JA1/ap3g2-k9w8-mx.153-3.JA1" uncompressed and installed, entry point: 0x2003000
executing...
Secondary Bootloader - Starting system.
Montserrat Board
40MB format
Tide XL MB - 40MB of flash
Xmodem file system is available.
flashfs[0]: 67 files, 9 directories
flashfs[0]: 0 orphaned files, 0 orphaned directories
flashfs[0]: Total bytes: 41158656
flashfs[0]: Bytes used: 20894208
flashfs[0]: Bytes available: 20264448
flashfs[0]: flashfs fsck took 21 seconds.
flashfs[1]: 0 files, 1 directories
flashfs[1]: 0 orphaned files, 0 orphaned directories
flashfs[1]: Total bytes: 12257280
flashfs[1]: Bytes used: 1024
flashfs[1]: Bytes available: 12256256
flashfs[1]: flashfs fsck took 1 seconds.
Base Ethernet MAC address: f4:4e:05:b7:1e:84
Boot CMD: 'boot flash:/ap3g2-k9w8-mx.153-3.JA1/ap3g2-k9w8-xx.153-3.JA1;flash:/ap3g2-k9w8-mx.153-3.JA1/ap3g2-k9w8-xx.153-3.JA1'
Loading "flash:/ap3g2-k9w8-mx.153-3.JA1/ap3g2-k9w8-xx.153-3.JA1"...###############################################
File "flash:/ap3g2-k9w8-mx.153-3.JA1/ap3g2-k9w8-xx.153-3.JA1" uncompressed and installed, entry point: 0x1003000
executing...
Restricted Rights Legend
Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
Rights clause at FAR sec. 52.227-19 and subparagraph
(c) (1) (ii) of the Rights in Technical Data and Computer
Software clause at DFARS sec. 252.227-7013.
cisco Systems, Inc.
170 West Tasman Drive
San Jose, California 95134-1706
Cisco IOS Software, C3700 Software (AP3G2-K9W8-M), Version 15.3(3)JA1, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2014 by Cisco Systems, Inc.
Compiled Fri 19-Dec-14 11:20 by prod_rel_team
Montserrat Board
40MB format
Tide XL MB - 40MB of flash
Initializing flashfs...
flashfs[2]: 67 files, 9 directories
flashfs[2]: 0 orphaned files, 0 orphaned directories
flashfs[2]: Total bytes: 40900608
flashfs[2]: Bytes used: 20894208
flashfs[2]: Bytes available: 20006400
flashfs[2]: flashfs fsck took 14 seconds.
flashfs[2]: Initialization complete.
flashfs[4]: 0 files, 1 directories
flashfs[4]: 0 orphaned files, 0 orphaned directories
flashfs[4]: Total bytes: 11999232
flashfs[4]: Bytes used: 1024
flashfs[4]: Bytes available: 11998208
flashfs[4]: flashfs fsck took 0 seconds.
flashfs[4]: Initialization complete.
Copying radio files from flash: to ram:
Copy in progress...CCCCC
Copy in progress...CCC
Copy in progress...CCCC
Copy in progress...CCCC
Copy in progress...CC
Copy in progress...CCCC
Copy in progress...CC
Copy in progress...CCCCC
Copy in progress...CCCC
Copy in progress...CC
Uncompressing radio files...
...done Initializing flashfs.
Radio0 present 8764 8000 0 A8000000 A8010000 0
Rate table has 650 entries (20 legacy/224 11n/406 11ac)
POWER TABLE FILENAME = ram:/Q2.bin
Radio1 present 8864 8000 0 80000000 80100000 4
POWER TABLE FILENAME = ram:/Q5.bin
Radio2 not present 0 0 0 0 0 8
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
If you require further assistance please contact us by sending email to
[email protected].
cisco AIR-CAP3702I-Z-K9 (PowerPC) processor (revision A0) with 376810K/134656K bytes of memory.
Processor board ID FGL1838X4T1
PowerPC CPU at 800Mhz, revision number 0x2151
Last reset from power-on
LWAPP image version 8.0.110.0
1 Gigabit Ethernet interface
2 802.11 Radios
32K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address: F4:4E:05:B7:1E:84
Part Number : 73-15243-01
PCA Assembly Number : 000-00000-00
PCA Revision Number :
PCB Serial Number : FOC18343WPR
Top Assembly Part Number : 068-05054-03
Top Assembly Serial Number : FGL1838X4T1
Top Revision Number : A0
Product/Model Number : AIR-CAP3702I-Z-K9
% Please define a domain-name first.
Press RETURN to get started!
*Mar 1 00:00:19.295: %SOAP_FIPS-2-SELF_TEST_IOS_SUCCESS: IOS crypto FIPS self test passed (15)
*Mar 1 00:00:19.755: Registering HW DTLS
*Mar 1 00:00:19.763: APAVC: Initial WLAN Buffers Given to System is 2500
*Mar 1 00:00:19.815: APAVC: WlanPAKs 42878 RadioPaks 42270
*Mar 1 00:00:22.127: %LINK-6-UPDOWN: Interface GigabitEthernet0, changed state to up
*Mar 1 00:00:26.055: %SOAP_FIPS-2-SELF_TEST_RAD_SUCCESS: RADIO crypto FIPS self test passed on interface Dot11Radio 0 (4)
*Mar 1 00:00:26.167: Loading Power Tables from ram:/Q2.bin. Class = A
*Mar 1 00:00:26.167: record size of 3ss: 1168 read_ptr: 4F9698E
*Mar 1 00:00:31.207: %SOAP_FIPS-2-SELF_TEST_RAD_SUCCESS: RADIO crypto FIPS self test passed on interface Dot11Radio 1 (4)
*Mar 1 00:00:31.251: Loading Power Tables from ram:/Q5.bin. Class = Z
*Mar 1 00:00:31.251: record size of vht: 2904 read_ptr: 4F9698E
*Mar 1 00:00:31.407: Wait until the stile protocol list is initialized.
*Mar 1 00:00:32.651: Start STILE Activation
*Mar 1 00:00:34.571: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0, changed state to down
*Mar 1 00:00:35.447: %SYS-5-RESTART: System restarted --
Cisco IOS Software, C3700 Software (AP3G2-K9W8-M), Version 15.3(3)JA1, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2014 by Cisco Systems, Inc.
Compiled Fri 19-Dec-14 11:20 by prod_rel_team
*Mar 1 00:00:35.447: %SNMP-5-COLDSTART: SNMP agent on host Test_1 is undergoing a cold start
*Mar 1 00:00:36.563: %LINEPROTO-5-UPDOWN: Line protocol on Interface BVI1, changed state to up
*Mar 1 00:00:37.787: %LINK-6-UPDOWN: Interface Dot11Radio0, changed state to uplwapp_crypto_init: MIC Present and Parsed Successfully
*Mar 1 00:00:37.939: %SSH-5-ENABLED: SSH 2.0 has been enabled
*Mar 1 00:00:37.939: %LINK-6-UPDOWN: Interface Dot11Radio1, changed state to up
*Mar 1 00:00:38.987: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to down
*Mar 1 00:00:38.987: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed state to down
*Mar 1 00:00:47.567: %LINK-6-UPDOWN: Interface BVI1, changed state to down
*Mar 1 00:00:48.567: %LINEPROTO-5-UPDOWN: Line protocol on Interface BVI1, changed state to down
*Mar 1 00:00:50.431: %SOAP_FIPS-2-SELF_TEST_HW_SUCCESS: HW crypto FIPS self test passed (2-16)
*Mar 1 00:00:50.431: DPAA Initialization Complete
*Mar 1 00:00:50.431: %SYS-3-HARIKARI: Process DPAA INIT top-level routine exited
*Mar 1 00:00:51.431: %LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet0, changed state to up
*Mar 1 00:00:53.435: %LINK-6-UPDOWN: Interface BVI1, changed state to up
*Mar 1 00:00:53.867: Currently running a Release Image
*Mar 1 00:00:54.287: Incorrect certificate in SHA2 PB !
*Mar 1 00:00:54.287: Using SHA-1 signed certificate for image signing validation.
*Mar 1 00:00:54.575: %LINEPROTO-5-UPDOWN: Line protocol on Interface BVI1, changed state to up
*Mar 1 00:00:59.787: %DHCP-6-ADDRESS_ASSIGN: Interface BVI1 assigned DHCP address 10.1.20.2, mask 255.255.255.0, hostname Test_1
*Mar 1 00:01:02.707: APAVC: Succeeded to activate all the STILE protocols.
*Mar 1 00:01:02.707: APAVC: Registering with CFT
*Mar 1 00:01:02.707: APAVC: CFT registration of delete callback succeeded
*Mar 1 00:01:02.707: APAVC: Reattaching Original Buffer pool for system use
*Mar 1 00:01:02.707: Pool-ReAtach: paks 42878 radio42270
%Default route without gateway, if not a point-to-point interface, may impact performance
*Mar 1 00:01:10.103: AP image integrity check PASSED
*Mar 1 00:01:10.187: Incorrect certificate in SHA2 PB !
*Mar 1 00:01:10.203: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to reset
*Mar 1 00:01:10.203: %LINK-5-CHANGED: Interface Dot11Radio1, changed state to reset
*Mar 1 00:01:11.591: %CDP_PD-4-POWER_OK: 15.4 W power - NEGOTIATED inline power source
*Mar 1 00:01:12.691: %LINK-6-UPDOWN: Interface Dot11Radio0, changed state to up
*Mar 1 00:01:13.691: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to up
*Mar 1 00:01:13.947: %LINK-6-UPDOWN: Interface Dot11Radio1, changed state to up
*Mar 1 00:01:14.947: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed state to up
*Mar 1 00:01:20.211: %SYS-6-LOGGINGHOST_STARTSTOP: Logging to host 255.255.255.255 port 514 CLI Request Triggered
Translating "CISCO-CAPWAP-CONTROLLER"...domain server (255.255.255.255)
*Mar 1 00:01:31.215: %CAPWAP-5-DHCP_OPTION_43: Controller address 10.1.1.231 obtained through DHCP
*Mar 1 00:02:11.599: %CDP_PD-4-POWER_OK: Full power - NEGOTIATED inline power source
*Mar 1 00:02:11.603: %LINK-6-UPDOWN: Interface Dot11Radio0, changed state to down
*Mar 1 00:02:11.611: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to reset
*Mar 1 00:02:12.603: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to down
*Mar 1 00:02:12.639: %LINK-6-UPDOWN: Interface Dot11Radio0, changed state to up
*Mar 1 00:02:12.647: %LINK-6-UPDOWN: Interface Dot11Radio1, changed state to down
*Mar 1 00:02:12.655: %LINK-5-CHANGED: Interface Dot11Radio1, changed state to reset
*Mar 1 00:02:13.639: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to up
*Mar 1 00:02:13.647: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed state to down
*Mar 1 00:02:13.699: %LINK-6-UPDOWN: Interface Dot11Radio1, changed state to up
*Mar 1 00:02:14.699: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed state to up
Not in Bound state.
*Mar 1 00:02:44.719: %CAPWAP-3-DHCP_RENEW: Could not discover WLC. Either IP address is not assigned or assigned IP is wrong. Renewing DHCP IP.
*Mar 1 00:02:49.839: %DHCP-6-ADDRESS_ASSIGN: Interface BVI1 assigned DHCP address 10.1.20.3, mask 255.255.255.0, hostname Test_1
Translating "CISCO-CAPWAP-CONTROLLER"...domain server (255.255.255.255)
*Mar 1 00:02:55.719: %CAPWAP-5-DHCP_OPTION_43: Controller address 10.1.1.231 obtained through DHCP
Not in Bound state.
*Mar 1 00:03:59.219: %CAPWAP-3-DHCP_RENEW: Could not discover WLC. Either IP address is not assigned or assigned IP is wrong. Renewing DHCP IP.
*Mar 1 00:04:04.343: %DHCP-6-ADDRESS_ASSIGN: Interface BVI1 assigned DHCP address 10.1.20.4, mask 255.255.255.0, hostname Test_1
Translating "CISCO-CAPWAP-CONTROLLER"...domain server (255.255.255.255)
*Mar 1 00:04:10.223: %CAPWAP-5-DHCP_OPTION_43: Controller address 10.1.1.231 obtained through DHCP -
Cisco APs not updating after WLC-update
Hello everyone,
I need to update my 5508 WLCs to a newer software, to support new AP-models.
Started with AIR-CT5500-K9-1-7-0-0-FUS.aes and AIR-CT5500-K9-7-0-240-0.aes, everything worked fine. Pre-Downloaded the newer Image to the APs, restarted the WLCs and everything was ok.
Now I tried to update to 7.6.100.0 as well as 7.4.121.0. Both Versions should support my APs, but it doesn't work at all.
Any ideas are highly appreciated.
If you need further output, just let me know.
Regards,
Manuel
These are some informations about the environment, AP-info and logging after "upgrade" to 7.4.121.0, controller-information after downgrading again...
AP# sh ver
Cisco IOS Software, C1240 Software (C1240-K9W8-M), Version 12.4(23c)JA7, RELEASE SOFTWARE (fc1)
ROM: Bootstrap program is C1240 boot loader BOOTLDR: C1240 Boot Loader (C1240-BOOT-M) Version 12.4(13d)JA, RELEASE SOFTWARE (fc2)
AP uptime is 1 minute System returned to ROM by power-on System image file is "flash:/c1240-k9w8-mx.124-23c.JA7/c1240-k9w8-mx.124-23c.JA7"
cisco AIR-LAP1242AG-E-K9 (PowerPCElvis) processor (revision A0) with 27638K/5120K bytes of memory.
Processor board ID FCZ1545812F
PowerPCElvis CPU at 262Mhz, revision number 0x0950
Last reset from power-on LWAPP image version 7.0.240.0
1 FastEthernet interface
2 802.11 Radio(s)
32K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address: 70:CA:9B:07:86:B8
Part Number : 73-10256-07
PCA Assembly Number : 800-26918-06
PCA Revision Number : A0
PCB Serial Number : FOC15402NP4
Top Assembly Part Number : 800-29152-03
Top Assembly Serial Number : FCZ1545812F
Top Revision Number : A0
Product/Model Number : AIR-LAP1242AG-E-K9
Configuration register is 0xF
AP#dir
Directory of flash:/
2 -rwx 89311 Jan 18 2014 20:41:00 +00:00 event.log
3 drwx 64 Jan 18 2014 20:43:21 +00:00 update
5 drwx 256 Jan 18 2014 20:40:55 +00:00 c1240-k9w8-mx.124-23c.JA7
4 -rwx 6168 Nov 2 2011 23:32:18 +00:00 private-multiple-fs
7 -rwx 395 Mar 1 2002 00:00:05 +00:00 env_vars
15740928 bytes total (8772096 bytes free)
AP#dir
Directory of flash:/c1240-k9w8-mx.124-23c.JA7/
9 -rwx 131328 Jan 18 2014 20:39:46 +00:00 7101.img
10 -rwx 292 Jan 18 2014 20:39:46 +00:00 info
11 -rwx 4642714 Jan 18 2014 20:40:55 +00:00 c1240-k9w8-mx.124-23c.JA7
15 -rwx 131328 Jan 18 2014 20:40:56 +00:00 6701.img
#sh logging --> see attached file
CONTROLLER (unfortunately after downgrading it again):
(Cisco Controller) >show sysinfo
Manufacturer's Name.............................. Cisco Systems Inc.
Product Name..................................... Cisco Controller
Product Version.................................. 7.0.240.0
Bootloader Version............................... 1.0.16
Field Recovery Image Version..................... 7.0.112.21
Firmware Version................................. FPGA 1.7, Env 1.8, USB console 2.2
Build Type....................................... DATA + WPS
System ObjectID.................................. 1.3.6.1.4.1.9.1.1069
IP Address....................................... WLC-IP
Last Reset....................................... Software reset
System Up Time................................... 0 days 0 hrs 26 mins 3 secs
System Timezone Location......................... (GMT +1:00) Amsterdam, Berlin, Rome, Vienna Current Boot
License Level....................... base
Current Boot License Type........................ Permanent
Next Boot License Level.......................... base
Next Boot License Type........................... Permanent
Configured Country............................... DE - Germany
State of 802.11b Network......................... Enabled
State of 802.11a Network......................... Enabled
Number of WLANs.................................. 2
Number of Active Clients......................... 5
Burned-in MAC Address............................ 1C:DF:0F:C6:D8:80
Power Supply 1................................... Present, OK
Power Supply 2................................... Absent
Maximum number of APs supported.................. 150
(Cisco Controller) >show boot
Primary Boot Image............................... 7.4.121.0
Backup Boot Image................................ 7.0.240.0 (default) (active)
(Cisco Controller) >show ap bundle primary
Primary AP Image Size
ap1g2 9576
ap3g1 6684
ap3g2 11208
ap801 5192
ap802 5232
c1100 3096
c1130 4972
c1140 4992
c1200 3364
c1240 4812
c1250 5512
c1310 3136
c1520 6412
c3201 4324
c602i 3716
(Cisco Controller) >show ap bundle secondary
Secondary AP Image Size
ap3g1 6684
ap801 5192
ap802 5232
c1100 3096
c1130 4972
c1140 4992
c1200 3364
c1240 4812
c1250 5512
c1310 3136
c1520 6412
c3201 4324
c602i 3716
Nachricht geändert durch Manuel SporlederHi Scott,
I am not trying to pre-download it anymore, since this doesn't work at all.
If I just restart the controller, the APs are downloading the image telling me "everything is fine", are rebooted and that stated with the old image again.
This is what you can see in the attached log-file:
*Mar 1 00:00:05.873: soap_prepare_new_image_crash: mini ios flash:/c1240-rcvk9w8-mx/c1240-rcvk9w8-mx
*Mar 1 00:00:06.242: %SOAP_FIPS-2-SELF_TEST_IOS_SUCCESS: IOS crypto FIPS self test passed
*Mar 1 00:00:07.662: %SOAP_FIPS-2-SELF_TEST_RAD_SUCCESS: RADIO crypto FIPS self test passed on interface Dot11Radio 0
*Mar 1 00:00:09.054: %SOAP_FIPS-2-SELF_TEST_RAD_SUCCESS: RADIO crypto FIPS self test passed on interface Dot11Radio 1
*Mar 1 00:00:09.152: %LWAPP-3-CLIENTEVENTLOG: Read and initialized AP event log (contains, 1024 messages)
*Mar 1 00:00:09.181: status of voice_diag_test from WLC is false
*Mar 1 00:00:11.381: %LINK-3-UPDOWN: Interface FastEthernet0, changed state to up
*Mar 1 00:00:11.440: %SYS-5-RESTART: System restarted
*Mar 1 00:00:11.441: %SNMP-5-COLDSTART: SNMP agent on host AP is undergoing a cold start
*Nov 2 23:31:59.107: %LINK-5-CHANGED: Interface Dot11Radio1, changed state to reset
*Nov 2 23:31:59.108: %LINK-5-CHANGED: Interface Dot11Radio0, changed state to reset
*Nov 2 23:31:59.929: %LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0, changed state to up
*Nov 2 23:32:00.107: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio1, changed state to down
*Nov 2 23:32:00.107: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to down
*Nov 2 23:32:18.102: %CAPWAP-5-CHANGED: CAPWAP changed state to DISCOVERY
*Nov 2 23:32:18.163: bsnUnlockDevice: not bring radio up: radio 1 is in admin disable state
*Nov 2 23:32:18.345: %SSH-5-ENABLED: SSH 2.0 has been enabled
*Nov 2 23:32:18.759: status of voice_diag_test from WLC is false
*Nov 2 23:32:18.847: Logging LWAPP message to 255.255.255.255.
*Nov 2 23:32:33.181: %CDP_PD-4-POWER_OK: Full power - NEGOTIATED inline power source
*Nov 2 23:32:33.247: %LINK-3-UPDOWN: Interface Dot11Radio0, changed state to up
*Nov 2 23:32:34.212: %LINEPROTO-5-UPDOWN: Line protocol on Interface Dot11Radio0, changed state to up
*Nov 2 23:32:34.213: %SYS-6-LOGGINGHOST_STARTSTOP: Logging to host 255.255.255.255 started - CLI initiated
*Jan 20 20:32:44.000: %CAPWAP-5-DTLSREQSEND: DTLS connection request sent peer_ip: WLC-1-IP peer_port: 5246
*Jan 20 20:32:44.001: %CAPWAP-5-CHANGED: CAPWAP changed state to
*Jan 20 20:32:45.479: %CAPWAP-5-DTLSREQSUCC: DTLS connection created sucessfully peer_ip: WLC-1-IP peer_port: 5246
*Jan 20 20:32:45.480: %CAPWAP-5-SENDJOIN: sending Join Request to WLC-1-IP
*Jan 20 20:32:45.481: %CAPWAP-5-CHANGED: CAPWAP changed state to JOIN
*Jan 20 20:32:45.483: %CAPWAP-3-ERRORLOG: Invalid event 10 & state 5 combination.
*Jan 20 20:32:45.483: %CAPWAP-3-ERRORLOG: CAPWAP SM handler: Failed to process message type 10 state 5.
*Jan 20 20:32:45.483: %CAPWAP-3-ERRORLOG: Failed to handle capwap control message from controller
*Jan 20 20:32:45.484: %CAPWAP-3-ERRORLOG: Failed to process encrypted capwap packet from WLC-1-IPperform archive download capwap:/c1240 tar file
*Jan 20 20:32:45.494: %CAPWAP-5-AP_IMG_DWNLD: Required image not found on AP. Downloading image from Controller.
*Jan 20 20:32:45.499: %CAPWAP-5-CHANGED: CAPWAP changed state to IMAGE
*Jan 20 20:33:58.755: %DTLS-3-BAD_RECORD: Erroneous record received from WLC-1-IP: Duplicate (replayed) record
*Jan 20 20:33:59.315: image upgrade successfully, system is now reloading
This happens again and again and again...
Regards, Manuel -
I upgraded a controller yesterday 5508 it went from a low code version 6.x to 6.0.196.0 then to 7.0.116.0. However although all the access points joined code 6.0.196.0 they refused to join 7.0.116.0. The aps are all 1242s.
The country codes etc were all fine so I do not understand what was going on.
Any ideas?
*spamApTask0: Jun 26 16:07:44.734: 00:3a:99:db:f3:20 Discovery Request from 10.0.0.183:55065
*spamApTask0: Jun 26 16:07:44.734: 00:3a:99:db:f3:20 Join Priority Processing status = 0, Incoming Ap's Priority 1, MaxLrads = 25, joined Aps =0
*spamApTask0: Jun 26 16:07:44.735: 00:3a:99:db:f3:20 Discovery Response sent to 10.0.0.183:55065
*spamApTask0: Jun 26 16:07:44.735: 00:3a:99:db:f3:20 Received LWAPP DISCOVERY REQUEST to e8:b7:48:9b:86:4f on port '13'
*spamApTask0: Jun 26 16:07:44.735: 00:3a:99:db:f3:20 Discarding discovery request in LWAPP from AP supporting CAPWAP
*spamApTask0: Jun 26 16:07:44.735: 00:3a:99:db:f3:20 Discovery Request from 10.0.0.183:55065
*spamApTask0: Jun 26 16:07:44.735: 00:3a:99:db:f3:20 Join Priority Processing status = 0, Incoming Ap's Priority 1, MaxLrads = 25, joined Aps =0
*spamApTask0: Jun 26 16:07:44.735: 00:3a:99:db:f3:20 Discovery Response sent to 10.0.0.183:55065
*spamApTask7: Jun 26 16:07:45.308: 00:3a:99:db:fa:20 Discovery Request from 10.0.0.95:55080
*spamApTask7: Jun 26 16:07:45.308: 00:3a:99:db:fa:20 Join Priority Processing status = 0, Incoming Ap's Priority 1, MaxLrads = 25, joined Aps =0
*spamApTask0: Jun 26 16:07:45.308: 00:3a:99:db:fa:20 Received LWAPP DISCOVERY REQUEST to e8:b7:48:9b:86:4f on port '13'
*spamApTask0: Jun 26 16:07:45.308: 00:3a:99:db:fa:20 Discarding discovery request in LWAPP from AP supporting CAPWAP
*spamApTask7: Jun 26 16:07:45.308: 00:3a:99:db:fa:20 Discovery Response sent to 10.0.0.95:55080
*spamApTask7: Jun 26 16:07:45.309: 00:3a:99:db:fa:20 Discovery Request from 10.0.0.95:55080
*spamApTask7: Jun 26 16:07:45.309: 00:3a:99:db:fa:20 Join Priority Processing status = 0, Incoming Ap's Priority 1, MaxLrads = 25, joined Aps =0
*spamApTask7: Jun 26 16:07:45.309: 00:3a:99:db:fa:20 Discovery Response sent to 10.0.0.95:55080
*spamApTask7: Jun 26 16:07:45.511: 00:13:c3:e1:4c:e0 Discovery Request from 10.0.1.232:20023
*spamApTask7: Jun 26 16:07:45.511: 00:13:c3:e1:4c:e0 Join Priority Processing status = 0, Incoming Ap's Priority 1, MaxLrads = 25, joined Aps =0
*spamApTask7: Jun 26 16:07:45.511: 00:13:c3:e1:4c:e0 Discovery Response sent to 10.0.1.232:20023
*spamApTask0: Jun 26 16:07:45.511: 00:13:c3:e1:4c:e0 Received LWAPP DISCOVERY REQUEST to e8:b7:48:9b:86:4f on port '13'
*spamApTask0: Jun 26 16:07:45.511: 00:13:c3:e1:4c:e0 Discarding discovery request in LWAPP from AP supporting CAPWAP
*spamApTask7: Jun 26 16:07:45.512: 00:13:c3:e1:4c:e0 Discovery Request from 10.0.1.232:20023
*spamApTask7: Jun 26 16:07:45.512: 00:13:c3:e1:4c:e0 Join Priority Processing status = 0, Incoming Ap's Priority 1, MaxLrads = 25, joined Aps =0
*spamApTask7: Jun 26 16:07:45.512: 00:13:c3:e1:4c:e0 Discovery Response sent to 10.0.1.232:20023
*spamApTask4: Jun 26 16:07:46.516: 00:3a:99:db:fa:10 DTLS connection not found, creating new connection for 10:0:0:101 (55079) 10:0:1:45 (5246)
*spamApTask4: Jun 26 16:07:46.708: 00:3a:99:db:fa:10 DTLS connection closed event receivedserver (10:0:1:45/5246) client (10:0:0:101/55079)
*spamApTask4: Jun 26 16:07:46.708: 00:3a:99:db:fa:10 No entry exists for AP (10:0:0:101/55079)
*spamApTask4: Jun 26 16:07:46.708: 00:3a:99:db:fa:10 No entry exists in database
*spamApTask4: Jun 26 16:07:47.759: 00:3a:99:db:fa:a0 Discovery Request from 10.0.0.184:55084
*spamApTask4: Jun 26 16:07:47.759: 00:3a:99:db:fa:a0 Join Priority Processing status = 0, Incoming Ap's Priority 1, MaxLrads = 25, joined Aps =0
*spamApTask0: Jun 26 16:07:47.760: 00:3a:99:db:fa:a0 Received LWAPP DISCOVERY REQUEST to e8:b7:48:9b:86:4f on port '13'
*spamApTask0: Jun 26 16:07:47.760: 00:3a:99:db:fa:a0 Discarding discovery request in LWAPP from AP supporting CAPWAP
*spamApTask4: Jun 26 16:07:47.760: 00:3a:99:db:fa:a0 Discovery Response sent to 10.0.0.184:55084
*spamApTask4: Jun 26 16:07:47.760: 00:3a:99:db:fa:a0 Discovery Request from 10.0.0.184:55084
*spamApTask4: Jun 26 16:07:47.760: 00:3a:99:db:fa:a0 Join Priority Processing status = 0, Incoming Ap's Priority 1, MaxLrads = 25, joined Aps =0
*spamApTask4: Jun 26 16:07:47.760: 00:3a:99:db:fa:a0 Discovery Response sent to 10.0.0.184:55084
*spamApTask7: Jun 26 16:07:49.471: 00:13:c3:e1:4d:c0 Discovery Request from 10.0.1.239:20032
*spamApTask7: Jun 26 16:07:49.471: 00:13:c3:e1:4d:c0 Join Priority Processing status = 0, Incoming Ap's Priority 1, MaxLrads = 25, joined Aps =0
*spamApTask7: Jun 26 16:07:49.471: 00:13:c3:e1:4d:c0 Discovery Response sent to 10.0.1.239:20032
*spamApTask0: Jun 26 16:07:49.471: 00:13:c3:e1:4d:c0 Received LWAPP DISCOVERY REQUEST to e8:b7:48:9b:86:4f on port '13'
*spamApTask0: Jun 26 16:07:49.471: 00:13:c3:e1:4d:c0 Discarding discovery request in LWAPP from AP supporting CAPWAP
*spamApTask7: Jun 26 16:07:49.472: 00:13:c3:e1:4d:c0 Discovery Request from 10.0.1.239:20032
*spamApTask7: Jun 26 16:07:49.472: 00:13:c3:e1:4d:c0 Join Priority Processing status = 0, Incoming Ap's Priority 1, MaxLrads = 25, joined Aps =0
*spamApTask7: Jun 26 16:07:49.472: 00:13:c3:e1:4d:c0 Discovery Response sent to 10.0.1.239:20032
*spamApTask1: Jun 26 16:07:52.222: 00:13:c3:e1:4d:80 Discovery Request from 10.0.1.230:20027
*spamApTask1: Jun 26 16:07:52.222: 00:13:c3:e1:4d:80 Join Priority Processing status = 0, Incoming Ap's Priority 1, MaxLrads = 25, joined Aps =0
*spamApTask1: Jun 26 16:07:52.223: 00:13:c3:e1:4d:80 Discovery Response sent to 10.0.1.230:20027
*spamApTask0: Jun 26 16:07:52.223: 00:13:c3:e1:4d:80 Received LWAPP DISCOVERY REQUEST to e8:b7:48:9b:86:4f on port '13'
*spamApTask0: Jun 26 16:07:52.223: 00:13:c3:e1:4d:80 Discarding discovery request in LWAPP from AP supporting CAPWAP
*spamApTask1: Jun 26 16:07:52.223: 00:13:c3:e1:4d:80 Discovery Request from 10.0.1.230:20027
*spamApTask1: Jun 26 16:07:52.223: 00:13:c3:e1:4d:80 Join Priority Processing status = 0, Incoming Ap's Priority 1, MaxLrads = 25, joined Aps =0
*spamApTask1: Jun 26 16:07:52.224: 00:13:c3:e1:4d:80 Discovery Response sent to 10.0.1.230:20027
*spamApTask5: Jun 26 16:07:52.267: 00:3a:99:da:c7:70 DTLS connection not found, creating new connection for 10:0:0:181 (34152) 10:0:1:45 (5246)
*spamApTask1: Jun 26 16:07:52.274: 00:3a:99:db:ff:20 Discovery Request from 10.0.0.182:55099
*spamApTask1: Jun 26 16:07:52.274: 00:3a:99:db:ff:20 Join Priority Processing status = 0, Incoming Ap's Priority 1, MaxLrads = 25, joined Aps =0
*spamApTask0: Jun 26 16:07:52.274: 00:3a:99:db:ff:20 Received LWAPP DISCOVERY REQUEST to e8:b7:48:9b:86:4f on port '13'
*spamApTask1: Jun 26 16:07:52.274: 00:3a:99:db:ff:20 Discovery Response sent to 10.0.0.182:55099
*spamApTask0: Jun 26 16:07:52.274: 00:3a:99:db:ff:20 Discarding discovery request in LWAPP from AP supporting CAPWAP
*spamApTask1: Jun 26 16:07:52.275: 00:3a:99:db:ff:20 Discovery Request from 10.0.0.182:55099
*spamApTask1: Jun 26 16:07:52.275: 00:3a:99:db:ff:20 Join Priority Processing status = 0, Incoming Ap's Priority 1, MaxLrads = 25, joined Aps =0
*spamApTask1: Jun 26 16:07:52.275: 00:3a:99:db:ff:20 Discovery Response sent to 10.0.0.182:55099
*spamApTask1: Jun 26 16:07:52.306: 00:3a:99:db:f2:40 DTLS connection not found, creating new connection for 10:0:0:100 (55069) 10:0:1:45 (5246)
*spamApTask5: Jun 26 16:07:52.463: 00:3a:99:da:c7:70 DTLS connection closed event receivedserver (10:0:1:45/5246) client (10:0:0:181/34152)
*spamApTask5: Jun 26 16:07:52.463: 00:3a:99:da:c7:70 No entry exists for AP (10:0:0:181/34152)
*spamApTask5: Jun 26 16:07:52.463: 00:3a:99:da:c7:70 No entry exists in database
*spamApTask1: Jun 26 16:07:52.501: 00:3a:99:db:f2:40 DTLS connection closed event receivedserver (10:0:1:45/5246) client (10:0:0:100/55069)
*spamApTask1: Jun 26 16:07:52.502: 00:3a:99:db:f2:40 No entry exists for AP (10:0:0:100/55069)
*spamApTask1: Jun 26 16:07:52.502: 00:3a:99:db:f2:40 No entry exists in databaseSomething "weird" is on the newest 7.0.X. Here's my situation:
1. It doesn't happen to all new APs. When I mean "new", I mean out from a box including APs from RMA.
2. I've seen this in 1240, 1250, 1140. Haven't seen it on a 3500.
3. Here's how it goes ... When the AP, fresh from a box, connects to the networks, sees the WLC/WiSM and downloads the full IOS (OK so far). After the reboot the AP in question loads the new IOS and shows up in the WLC/WiSM. When I check CDP neighbors, NOTHING. What the ... ?
4. Go to the switch and do command "sh cdp neighbor" and what do I get? NOTHING.
5. Check PoE and show that it's IEEE.
For unknown reason, APs in this "trance" shuts off the CDP. I currently have a Cisco TAC Case trying to iron out this "feature". Doesn't appear on the 7.0.96.0 but happens to the newer one. -
So today has been a disaster. I have 11 Cisco Aironet APs connected to a Cisco WLC 4402 running 7.0.235.3. When we lost power to the controller over the weekend I only had 8 come back. In the AP join log three of them were saying"Layer 3 discovery request not received on management VLAN". Mind you they were working before the power went out. So one of my colleagues advised me to shut down the controller, disable the switch ports the AP's are plugged into, restart the controller, and then reenable the ports on the switch. Well now I only have three. The rest get the same error message I mentioned before. I also tried disabled and reenabled the DHCP scope they work on as well. Like I said they were all working before the power went out. Can anyone help?
Nothing is wrong. That message simply means, that there was an LWAPP request and the code the AP is on is CAPWAP. This happens in case you have a WLC on older code, but get/convert one with newer code.
Is the dhcp server for the AP management network in another vlan and you have ip helper-address configured?
How are you doing your Discovery? L2 forwarding, option 43?
I think you may have to upgrade the code on your controller to support your aps... or downgrade the code on the aps manually before attempting the join process with your controller.
What model # AP ? -
APs not joining 5508 on dynamic ports created manualy
Hey all,
i have a problem with our new 5508 wireless controller (7.0.116.0).
Port 1 is the system default "management" (Port 2 is backup). Dynamic AP Management is disabled.
Port 3 is a new dynamic interface "ap-manager 2" with Dynamic AP Management enabled and has a ip in a seperated VLAN which is not routed.
When i am connecting the AP (1260 series) to the "ap-manager 2" interface, then it will not join and i get an error message on the WLC:
*spamApTask1: Mar 05 14:52:12.783: %CAPWAP-3-DISC_INTF_ERR1:
capwap_ac_sm.c:1453 Ignoring discovery request received on non-management
interface (3) from AP
When i am connecting the AP to the "management2 interface, then it is working fine. But i don't want the APs in the Management LAN. I want them in the separated no routed LAN explicit for the APs.
What do i miss here.
Thanks a lot.
Regards
MatthewHmmm...but i found follwoing in the documentation:
The AP-manager interface's IP address must be different from the management interface's IP address and may or may not be on the same subnet as the management interface. However, we recommend that both interfaces be on the same subnet for optimum access point association.
I want the APs in a separated non routed LAN because of security reasons. Why set APs into the management LAN when they only need to communicate with the controller?
But if there is no way to do that, then i need to redesign the plans for the WLAN structure.
Thanks
Matthew -
Ignoring discovery request - AP on dynamic client interface
Hi All,
I have a questing regarding the AP Management Port on the 5508.
At our customers side there are some FAT-APs and we want to migrate them to the controller.
There is no DHCP Service active on the network (security-restriction by our customer) and the FAT-APs and Clients are configured with a static IP.
There is no LAG active everything is on Port 1.
Now after upgrading one AP to lightwight-mode,... he cannot discover his WLC (thats ok, because the Manament Interface is in a different subnet)
So I configured a IP-Helper and the neccesary udp-Port to get the AP joined on the WLC.
But on the Controller I get the following message:
%CAPWAP-3-DISC_INTF_ERR2: Ignoring discovery request received on a
wrong VLAN ([dec]) on interface ([int]) from AP
[hex]:[hex]:[hex]:[hex]:[hex]:[hex]
The wrong VLAN in the message is a dynamic Interface on the Controller for client and the AP is in that Subnet.
It its created as an Dynamic Interface on the WLC (without "Enable Dynamic AP Management")
I hope you can give me a hint. I'm not sure if I should enable "Dynamic AP Management" on that Client Interface.
By the way, the AP can join when i configure the Controller IP via console on it. But that should not be the solution
Thanks &
Best regards,
SimonHi Nicolas,
thanks for your reply.
I know, that this design is not "best practice".
Our customer has a LAN which has to be completly redesigned.
They use very huge subnets for their different production segments (255.255.240.0) and everything is in there.
The Autonomous AP Installation is in one of these huge network segments where the APs and the clients are in the same subnet..
Thats the background why this szenario is created.
I know that this design is absolutly unsatisfactory.
But thats the fact and I have to deal with this.
The helper is the WLCs Management Adress.
So what about the "ignoring discovery request" message.
Is there some possibility to get it work this way or is the only way to upgrade the APs via Console to get them to the controller.
I know the best way would be to get the APs in a new different subnet,...
regards,
Simon -
Discovery request received on wrong VLAN
I am setting up a new 4404 with my existing WLAN. I have a combo for 1100 and 1200 APs, on two different VLANs, with WDS on each VLAN and a WLSE. One of the VLANs is on the same subnet was the WLC management port. The other WLAN VLAN is not. I am able to join the VLAN on the same subnet to my WLC but when I convert one of my auto APs on the other VLAN, it converts but never joins my WLC. If I run a debug on the WLC I get the following.
Fri Aug 1 12:38:56 2008: 00:17:0f:37:68:60 Received LWAPP DISCOVERY REQUEST from AP 00:17:0f:37:68:60 to ff:ff:ff:ff:ff:ff on port '1'
Fri Aug 1 12:38:56 2008: Discovery Request received on wrong VLAN '160' on interface '1', management VLAN = '0' - in L3 mode, dropping the packet.
My WLC is on code 5.0.148. All of my APs have static IP addresses. I have setup DNS but NOT DHCP since all of them have static IP and that option 42 still confuses me. Any thoughts? My 4506 is set to trunk the port the WLC is on. I even tried to only apply the two VLANs to that port. My WLC can ping the IP of the AP on the different VLAN and my AP can ping the WLC.You need to configure the native vlan on the trunk port to vlan 160. Looks like the packet is being tagged as vlan 60 and your management interface is set to '0' which is untagged.
-
Hi guys,
I am in the process of configuring a WLC and got stuck due to APs are not joining the WLC.
I have configure DHCP server on the Gateway router and the WLC management interface is pointing to the Gateway as DHCP Server.
I have multiple Dynamic interfaces configured on the WLC and Interface group has been configured and mapped to Management Interface.
For each WLAN, a separate DHCP pool has been created on the router.
LAG has been configured and working fine. Connectivity works fine in the network and I can ping all devices and vlans from WLC.
Now, the APs are not joining the WLC. The error I am getting
" 44:03:a7:f1:b4:40 Received a Discovery Request from 44:03:A7:F1:B4:40 via IP broadcast address but the source IP address (10.xx.xx.xx) is not in any of the configured subnets. Dropping it "
Some one help me troubleshooting this issue with DHCP IP Assignment.
Thanks,
CJIf you are using Broadcast method to discover WLC to AP then you need to ensure following is correctly configured.
1. Unders the switch SVI defined for AP-management (10.38.11.x) you have to configure "ip helper-address "
2. In switch global config "ip forward-protocol udp 5246"
Refer this for more detail
http://mrncciew.com/2013/05/04/wlc-discovery-via-broadcast/
There are other methods available as well (static, DNS, DHCP option 43) for the WLC discovery purpose. To verify there is no configuration issues at WLC end, you can simply configure the WLC details on AP statically & check wether AP get register to WLC. To do this you can enter following CLI commands on AP console priviledge mode.
debug capwap console cli
capwap ap ip address 10.38.11.x 255.255.255.x
capwap ap ip default-gateway 10.38.11.y
capwap ap controller ip address
In this way your AP should get registered to WLC (if no config issue at WLC end). Refer this for more detail
http://mrncciew.com/2013/03/17/ap-registration/
If you have so many APs, then as Steve pointed configuring DHCP-Option 43 would be a good option
Regards
Rasika
**** Pls rate all useful responses **** -
Hello community,
I hope you can help me with my problem.
I have a vWLC Firmware version: 7.4.121.0, I have also Aironet 1700Aps
I have successfully configured wlc with service and management interface. In the management network I can ping the vWLC managenemt interface as well the APs in this network. The firewall is also the DHCP Server for the management network. (It is working because APs get an IP address) The problem is the APs are not joining the vWLC. This is my first time I use WLC and APs. So they are completely new and not used before.
Here is the debug output of vWLC:
ApTask4: Feb 11 16:31:07.997: 84:80:2d:bd:fa:10 Finding DTLS connection to delete for AP (192:168:200:10/57250)
*spamApTask4: Feb 11 16:31:07.997: 84:80:2d:bd:fa:10 Disconnecting DTLS Capwap-Ctrl session 0x8faa580 for AP (192:168:200:10/57250)
*spamApTask4: Feb 11 16:31:07.997: 84:80:2d:bd:fa:10 CAPWAP State: Dtls tear down
*spamApTask4: Feb 11 16:31:07.998: 84:80:2d:bd:fa:10 DTLS connection closed event receivedserver (192:168:200:3/5246) client (192:168:200:10/57250)
*spamApTask4: Feb 11 16:31:07.998: 84:80:2d:bd:fa:10 Entry exists for AP (192:168:200:10/57250)
*spamApTask4: Feb 11 16:31:07.998: 84:80:2d:bd:fa:10 No AP entry exist in temporary database for 192.168.200.10:57250
*spamApTask4: Feb 11 16:31:08.004: 84:80:2d:bd:fa:1e DTLS connection not found, creating new connection for 192:168:200:10 (57250) 192:168:200:3 (5246)
*spamApTask4: Feb 11 16:31:08.472: 84:80:2d:bd:fa:1e DTLS Session established server (192.168.200.3:5246), client (192.168.200.10:57250)
*spamApTask4: Feb 11 16:31:08.472: 84:80:2d:bd:fa:1e Starting wait join timer for AP: 192.168.200.10:57250
*spamApTask4: Feb 11 16:31:08.477: 84:80:2d:bd:fa:10 Join Request from 192.168.200.10:57250
*spamApTask4: Feb 11 16:31:08.477: 84:80:2d:bd:fa:1e Deleting AP entry 192.168.200.10:57250 from temporary database.
*spamApTask4: Feb 11 16:31:08.477: 84:80:2d:bd:fa:10 Finding DTLS connection to delete for AP (192:168:200:10/57250)
*spamApTask4: Feb 11 16:31:08.477: 84:80:2d:bd:fa:10 Disconnecting DTLS Capwap-Ctrl session 0x8faa720 for AP (192:168:200:10/57250)
*spamApTask4: Feb 11 16:31:08.477: 84:80:2d:bd:fa:10 CAPWAP State: Dtls tear down
*spamApTask4: Feb 11 16:31:08.479: 84:80:2d:bd:fa:10 DTLS connection closed event receivedserver (192:168:200:3/5246) client (192:168:200:10/57250)
*spamApTask4: Feb 11 16:31:08.479: 84:80:2d:bd:fa:10 Entry exists for AP (192:168:200:10/57250)
*spamApTask4: Feb 11 16:31:08.479: 84:80:2d:bd:fa:10 No AP entry exist in temporary database for 192.168.200.10:57250
*spamApTask4: Feb 11 16:31:08.515: 84:80:2d:bd:fa:10 Discovery Request from 192.168.200.10:57250
*spamApTask4: Feb 11 16:31:08.515: 84:80:2d:bd:fa:10 Join Priority Processing status = 0, Incoming Ap's Priority 1, MaxLrads = 200, joined Aps =0
*spamApTask4: Feb 11 16:31:08.515: 84:80:2d:bd:fa:10 Discovery Response sent to 192.168.200.10:57250
*spamApTask4: Feb 11 16:31:08.515: 84:80:2d:bd:fa:10 Discovery Response sent to 192.168.200.10:57250
*spamApTask4: Feb 11 16:31:08.516: 84:80:2d:bd:fa:10 Discovery Request from 192.168.200.10:57250
*spamApTask4: Feb 11 16:31:08.516: 84:80:2d:bd:fa:10 Join Priority Processing status = 0, Incoming Ap's Priority 1, MaxLrads = 200, joined Aps =0
*spamApTask4: Feb 11 16:31:08.516: 84:80:2d:bd:fa:10 Discovery Response sent to 192.168.200.10:57250
*spamApTask4: Feb 11 16:31:08.516: 84:80:2d:bd:fa:10 Discovery Response sent to 192.168.200.10:57250
*spamApTask0: Feb 11 16:31:08.516: 84:80:2d:bd:fa:1e Received LWAPP DISCOVERY REQUEST to 40:4a:03:79:d7:20 on port '1'
*spamApTask0: Feb 11 16:31:08.516: 84:80:2d:bd:fa:1e Discarding discovery request in LWAPP from AP supporting CAPWAP
Sadly I don`t have a debuging cable for the APs. Therefore I have no debuging output of the APs. (It is ordered ;-) )
But I hope the output of the APs is right now not important to solve this problem.
Thank you
//EDIT
On the firewall are no ports blockedOkay I upgraded the vWLC to 8.0.110.0.
I looked in the event log of the vWLC. It was successfully discovered and also the new image version was send to the AP.
Sadly the Ap does not join to the vWLC.
*apfReceiveTask: Feb 12 09:53:35.640: WARP IEs: (12)
*apfReceiveTask: Feb 12 09:53:35.640: [0000] dd 0a 00 c0 b9 01 00 00 00 08 01 01
*apfReceiveTask: Feb 12 09:53:35.640: Wlan Feature status 0 for AP:84:80:2d:45:75:e0 (slotID 1)
*apfReceiveTask: Feb 12 09:53:35.640: Split tunnel status (Disabled) encoded in the vap payload for WLAN(1), AP:84:80:2d:45:75:e0 (slotID 1)
*spamApTask5: Feb 12 09:53:35.789: 84:80:2d:45:75:e0 Configuration Status from 192.168.200.10:57251
*spamApTask5: Feb 12 09:53:35.789: 84:80:2d:45:75:e0 CAPWAP State: Configure
*spamApTask5: Feb 12 09:53:35.789: 84:80:2d:45:75:e0 Updating IP info for AP 84:80:2d:45:75:e0 -- static 0, 192.168.200.10/255.255.255.0, gtw 192.168.200.3
*spamApTask5: Feb 12 09:53:35.789: 84:80:2d:45:75:e0 Updating IP 192.168.200.10 ===> 192.168.200.10 for AP 84:80:2d:45:75:e0
*spamApTask5: Feb 12 09:53:35.789: 84:80:2d:45:75:e0 Invalid length (9) countedlen 6 sizeUserPayload 277 for vendor-specific element 0x00409600-unknown (185) from AP 84:80:2D:45:75:E0
*spamApTask5: Feb 12 09:53:35.790: 84:80:2d:45:75:e0 Setting MTU to 1485
*spamApTask5: Feb 12 09:53:35.790: 84:80:2d:45:75:e0 Finding DTLS connection to delete for AP (192:168:200:10/57251)
*spamApTask5: Feb 12 09:53:35.790: 84:80:2d:45:75:e0 Disconnecting DTLS Capwap-Ctrl session 0xb947000 for AP (192:168:200:10/57251)
*spamApTask5: Feb 12 09:53:35.790: 84:80:2d:45:75:e0 CAPWAP State: Dtls tear down
*spamApTask5: Feb 12 09:53:35.791: 84:80:2d:45:75:e0 DTLS connection closed event receivedserver (192.168.200.3/5246) client (192.168.200.10/57251)
*spamApTask5: Feb 12 09:53:35.791: 84:80:2d:45:75:e0 Entry exists for AP (192.168.200.10/57251)
*spamApTask5: Feb 12 09:53:35.791: 84:80:2d:45:75:e0 apfSpamProcessStateChangeInSpamContext: Deregister LWAPP event for AP 84:80:2d:45:75:e0 slot 0
*spamApTask5: Feb 12 09:53:35.791: 84:80:2d:45:75:e0 apfSpamProcessStateChangeInSpamContext: Deregister LWAPP event for AP 84:80:2d:45:75:e0 slot 1
*spamApTask5: Feb 12 09:53:35.791: update ap status:84:80:2d:45:75:e0 ,index:60
*spamApTask5: Feb 12 09:53:35.791: 84:80:2d:45:75:e0 No AP entry exist in temporary database for 192.168.200.10:57251
*apfReceiveTask: Feb 12 09:53:35.792: 84:80:2d:45:75:e0 Deregister LWAPP event for AP 84:80:2d:45:75:e0 slot 0
*apfReceiveTask: Feb 12 09:53:35.792: 84:80:2d:45:75:e0 Deregister LWAPP event for AP 84:80:2d:45:75:e0 slot 1
*spamApTask4: Feb 12 09:53:35.918: 84:80:2d:45:75:e0 Discovery Request from 192.168.200.10:57250
*spamApTask4: Feb 12 09:53:35.918: 84:80:2d:45:75:e0 Join Priority Processing status = 0, Incoming Ap's Priority 1, MaxLrads = 200, joined Aps =0
*spamApTask4: Feb 12 09:53:35.918: apModel: AIR-CAP702I-C-K9
*spamApTask4: Feb 12 09:53:35.918: apType = 45 apModel: AIR-CAP702I-C-K9
*spamApTask4: Feb 12 09:53:35.918: 84:80:2d:45:75:e0 Discovery Response sent to 192.168.200.10 port 57250
*spamApTask4: Feb 12 09:53:35.918: 84:80:2d:45:75:e0 Discovery Response sent to 192.168.200.10:57250
*spamApTask4: Feb 12 09:53:35.919: 84:80:2d:45:75:e0 Discovery Request from 192.168.200.10:57250
*spamApTask4: Feb 12 09:53:35.919: 84:80:2d:45:75:e0 Join Priority Processing status = 0, Incoming Ap's Priority 1, MaxLrads = 200, joined Aps =0
*spamApTask4: Feb 12 09:53:35.919: apModel: AIR-CAP702I-C-K9
*spamApTask4: Feb 12 09:53:35.919: apType = 45 apModel: AIR-CAP702I-C-K9
*spamApTask4: Feb 12 09:53:35.919: 84:80:2d:45:75:e0 Discovery Response sent to 192.168.200.10 port 57250
*spamApTask4: Feb 12 09:53:35.919: 84:80:2d:45:75:e0 Discovery Response sent to 192.168.200.10:57250
Sadly I don`t understand what this debugging log says :-(
Maybe you can help me again
Thank you
//SOLUTION -----------------------------------------------------------------------------------------------------------------------------------------------------------
I found something on the internet, but for all people having also this problem here is the solution:
Change the country of your vWLC. Right now I am in China, so I changed it and then it was working flawlessly :-)
Step 1
Disable the 802.11 networks as follows:
Choose Wireless > 802.11a/n > Network.
Unselect the 802.11a Network Status check box.
Click Apply.
Choose Wireless > 802.11a/n > Network.
Unselect the 802.11b/g Network Status check box.
Click Apply.
Step 2
Choose Wireless > Country to open the Country page.
Thank you all for your help :-)
Paul -
Lms 4.2 Cannot enable End Host Discovery on Trunk
Hi...
I have noticed that our LMS does not collect any information about wireless users connected to autonomous access points, although I can see the mac address of the wireless users on the switch (2960) Trunk port connecting to the AP via CLI. I can also get the IP address from the core switch. Even after selecting 'Perform Data Collection' on the AP in the topology, the Wireless End hosts report remains blank.
I am trying to enable the option 'End host Discovery on Selected Trunks' in the 'Acquisition configuration in Trunk' menu and after selecting the switch where the AP resides and clicking 'show Trunk' I get the message 'there are no trunks in the device(s) selected', although there are several trunk ports on this switch, other than the one connecting to the AP. The switch and the AP are managed by LMS. We are facing this problem with all Autonomus APs. We do not use WLSE. Is there something missing to discover these Wireless hosts ?
All help is appreciatedIs it safe to set UTGetVlansWithUserPorts=0 in the NMSROOT/campus/etc/cwsi/ut.properties ? I have seen this in a previous discussion, but thath was related to LMS 3.1, not 4.2
Regards -
Hi guys, i'll try to explain our trouble as best as i can:
Im trying to do some basic scenario here. Picture this: One L3 Switch connecting a 4402 Controller, 3 Administrative Vlans for APs (63, 93 and 127) and 3 Vlans for clients (one for each Administrative vlan, 16, 64 and 95 respectively). Also, in one of the administrative vlans (63) lives the Management and AP Manager interfaces of the controller. The L3 Switch does the DHCP business also, including giving the Controller IP (option 43).
Here is the deal: When i try to connect one LWAP AP in to the same VLAN as the controller (63) it does gets an IP address of the segment and also gets the Controller IP. BUT, it cannot reach the Controller Management interface, not by ping nor by registering. (i connected a laptop to chek this behavior and it cant ping the Management Interface either)
Then, if i connect the same AP to another VLAN (say.. 93)it will get an IP address of the segment, IP of the controller and it will reach the Controller by means of PING and also discovery request/discovery response. BUT, it wont register with the controller. In both cases, the L3 switch can ping just fine the APs and the Management Interface.
After sniffing little bit I can see that the AP does in fact send the Join request message to the AP Manager interface of the Controller, but it wont get an answer. Then, in the CLI of the Controller (debug lwapp events enable) i can see that the controller does recive the discovery request and send the discovery response messages, but never sees the join request frome the AP.
Configs of the switch and controller attached.
Also, i checked the date of the controller and its up to date, the certificates of the APs should be fine, they will expire in 2 o 3 more years.
Oh, and the Controller its not directly connected to the Switch, its connected to another 3500 switch using a GBIC, but its just used as a media converter... after that switch its connected to a trunk in the L3 Switch.. and yes, the Switch with the controller has all the needed vlans configured so they can be seen on the trunks.
Any help would be greately appretiated.Hi again... guess what? I came to work today, turned on all the equipment.. and it works! God knows why but now the APs can register. For your information I did reset the devices before, so i dont know what happened.
Anyway there is still a problem. If the APs are in the same VLAN as the controller, they cant see it. And this goes for every device, if I have 2 APs and one laptop in the same vlan they cant ping each other but can ping their GW. Any comments on this?
Thanks in advance! -
RD (Rogue Detector) or RLDP (Rogue Location Discovery Protocol)
Hi all,
Cisco documentaion states that there are two ways for detecting Rogues.
Rogue Detector Access Point
You can make an AP operate as a rogue detector, which allows it to be placed on a trunk port so that it can hear all wired-side connected VLANs. It proceeds to find the client on the wired subnet on all the VLANs. The rogue detector AP listens for Address Resolution Protocol (ARP) packets in order to determine the Layer 2 addresses of identified rogue clients or rogue APs sent by the controller. If a Layer 2 address that matches is found, the controller generates an alarm that identifies the rogue AP or client as a threat. This alarm indicates that the rogue was seen on the wired network.
Rogue Location Discovery Protocol (RLDP)
RLDP is an active approach, which is used when rogue AP has no authentication (Open Authentication) configured. This mode, which is disabled by default, instructs an active AP to move to the rogue channel and connect to the rogue as a client. During this time, the active AP sends deauthentication messages to all connected clients and then shuts down the radio interface. Then, it will associate to the rogue AP as a client.
The AP then tries to obtain an IP address from the rogue AP and forwards a User Datagram Protocol (UDP) packet (port 6352) that contains the local AP and rogue connection information to the controller through the rogue AP. If the controller receives this packet, the alarm is set to notify the network administrator that a rogue AP was discovered on the wired network with the RLDP feature.
So how do you turn on the latter (RLDP)?
Many thx indeed
Ken
The following modes of operations exist:
http://www.cisco.com/en/US/products/hw/wireless/ps430/products_qanda_item09186a00806a4da3.shtml
Q. What are the different modes in which a lightweight access point (LAP) can operate?
A. An LAP can operate in any of these modes:
•Local mode—This is the default mode of operation. When an LAP is placed into local mode, the AP will transmit on the normally assigned channel. However, the AP also monitors all other channels in the band over a period of 180 seconds to scan each of the other channels for 60ms during the non-transmit time. During this time, the AP performs noise floor measurements, measures interference, and scans for IDS events.
•REAP mode—Remote Edge Access Point (REAP) mode enables an LAP to reside across a WAN link and still be able to communicate with the WLC and provide the functionality of a regular LAP. REAP mode is supported only on the 1030 LAPs.
•H-REAP Mode— H-REAP is a wireless solution for branch office and remote office deployments. H-REAP enables customers to configure and control access points (APs) in a branch or remote office from the corporate office through a WAN link without the need to deploy a controller in each office. H-REAPs can switch client data traffic locally and perform client authentication locally when the connection to the controller is lost. When connected to the controller, H-REAPs can also tunnel traffic back to the controller.
•Monitor mode—Monitor mode is a feature designed to allow specified LWAPP-enabled APs to exclude themselves from handling data traffic between clients and the infrastructure. They instead act as dedicated sensors for location based services (LBS), rogue access point detection, and intrusion detection (IDS). When APs are in Monitor mode they cannot serve clients and continuously cycle through all configured channels listening to each channel for approximately 60 ms.
Note: From the controller release 5.0, LWAPPs can also be configured in Location Optimized Monitor Mode (LOMM), which optimizes the monitoring and location calculation of RFID tags. For more information on this mode, refer to Cisco Unified Wireless Network Software Release 5.0.
Note: With controller release 5.2, the Location Optimized Monitor Mode (LOMM) section has been renamed Tracking Optimization, and the LOMM Enabled drop-down box has been renamed Enable Tracking Optimization.
Note: For more information on how to configure Tracking Optimization, read the Optimizing RFID Tracking on Access Points section.
•Rogue detector mode—LAPs that operate in Rogue Detector mode monitor the rogue APs. They do not transmit or contain rogue APs. The idea is that the rogue detector should be able to see all the VLANs in the network since rogue APs can be connected to any of the VLANs in the network (thus we connect it to a trunk port). The switch sends all the rogue AP/Client MAC address lists to the Rogue Detector (RD). The RD then forwards those up to the WLC in order to compare with the MACs of clients that the WLC APs have heard over the air. If MACs match, then the WLC knows the rogue AP to which those clients are connected is on the wired network.
•Sniffer mode—An LWAPP that operates in Sniffer mode functions as a sniffer and captures and forwards all the packets on a particular channel to a remote machine that runs Airopeek. These packets contain information on timestamp, signal strength, packet size and so on. The Sniffer feature can be enabled only if you run Airopeek, which is a third-party network analyzer software that supports decoding of data packets.
•Bridge Mode— Bridge mode is used when the access points are setup in a mesh environment and used to bridge between each other.Found this in another post here on the forum :
There are 3 ways to detect rogue Aps:
1. Ap in monitor mode (sits and scans all channels. Can detect rogue Aps under 30 seconds
2. RLDP (done passively from normal Aps. Can take up to 15 minutes to detect rogue AP)
3. Rogue Detector (looks for broadcast packets from wireless clients on wired network)
For case number 2, a normal AP would be one in local or h-reap connected mode that normally have clients attached, but that are going off channel occasionally to scan for rogues / noise. The process of trying to validate that there is a network attached rogue (RDLP enabled) could likely be service interrupting depending on your AP layout.
-John -
Hi,
I have successfully connected my WLC 2500 controller with 20 light weight Access points 1262N.
I have used the internal DHCP server option in the controller for the AP's and client.
Port 1 of the WLC is trunked with the switch 2960. All is working fine
The problem comes when I remove the Ethernet cable from the management interface and restart the WLC. The AP's don't come back. If I don't restart the WLC the AP's remain.
On the other hand, when I leave the Ethernet cable connected to the management port with my pc and then reboot the WLC, the AP's appear.
Seems like whenever im not physically connected to the management port of the WLC and restart it, the AP's don't come back. The only way to make them come back again is to connect my PC to the management port.
Please help me. What seems to be the problem here ?
Best Regards,Hi,
All 20 Pc;s are in one area connected to the same AP im assuming. The PC;s are stationary, so didnt check for roaming, but generally my laptop connectivity is fine while roaming. It rarely disconnects but users have complained that it did disconncect a few times.
Please see below the WLC configuration:
User:Dawaa
Password:********
(Cisco Controller) >sh
(Cisco Controller) show>running-config
Notice: "show running-config" has been changed to be an alias to "show run-config".
Use "show run-config commands" to display the configuration commands.
Press Enter to continue or to abort...
System Inventory
NAME: "Chassis" , DESCR: "Cisco 2500 Series Wireless LAN Controller"
PID: AIR-CT2504-K9, VID: V01, SN: PSZ163602PD
Burned-in MAC Address............................ 20:3A:07:67:C3:00
Maximum number of APs supported.................. 15
Press Enter to continue or to abort
System Information
Manufacturer's Name.............................. Cisco Systems Inc.
Product Name..................................... Cisco Controller
Product Version.................................. 7.3.101.0
Bootloader Version............................... 1.0.16
Field Recovery Image Version..................... 1.0.0
Firmware Version................................. PIC 16.0
Build Type....................................... DATA + WPS
System Name...................................... tEthernet0
System Location..................................
System Contact...................................
System ObjectID.................................. 1.3.6.1.4.1.9.1.1279
IP Address....................................... 192.168.0.140
Last Reset....................................... Software reset
System Up Time................................... 0 days 1 hrs 23 mins 40 secs
System Timezone Location......................... (GMT +3:00) Baghdad
Configured Country............................... SA - Saudi Arabia
Operating Environment............................ Commercial (0 to 40 C)
--More or (q)uit current module or to abort
Internal Temp Alarm Limits....................... 0 to 65 C
Internal Temperature............................. +26 C
External Temperature............................. +30 C
Fan Status....................................... 4200 rpm
State of 802.11b Network......................... Enabled
State of 802.11a Network......................... Enabled
Number of WLANs.................................. 1
Number of Active Clients......................... 10
Burned-in MAC Address............................ 20:3A:07:67:C3:00
Maximum number of APs supported.................. 15
Press Enter to continue or to abort
AP Bundle Information
Primary AP Image Size
ap1g2 10596
ap3g1 11088
ap3g2 10968
ap801 7092
ap802 8428
c1130 5072
c1140 9288
c1250 6784
c1520 7852
c602i 3736
Secondary AP Image Size
ap1g2 10596
ap3g1 11088
ap3g2 10968
ap801 7092
ap802 8428
--More or (q)uit current module or to abort
c1130 5072
c1140 9288
c1250 6784
c1520 7852
c602i 3736
Press Enter to continue or to abort
Switch Configuration
802.3x Flow Control Mode......................... Disable
FIPS prerequisite features....................... Disabled
secret obfuscation............................... Enabled
Strong Password Check Features:
case-check ...........Enabled
consecutive-check ....Enabled
default-check .......Enabled
username-check ......Enabled
Press Enter to continue or to abort
Network Information
RF-Network Name............................. Dawaa
Web Mode.................................... Enable
Secure Web Mode............................. Enable
Secure Web Mode Cipher-Option High.......... Disable
Secure Web Mode Cipher-Option SSLv2......... Disable
Secure Web Mode RC4 Cipher Preference....... Disable
OCSP........................................ Disabled
OCSP responder URL..........................
Secure Shell (ssh).......................... Enable
Telnet...................................... Enable
Ethernet Multicast Forwarding............... Disable
Ethernet Broadcast Forwarding............... Disable
AP Multicast/Broadcast Mode................. Multicast Address : 239.60.60.60
IGMP snooping............................... Disabled
IGMP timeout................................ 60 seconds
IGMP Query Interval......................... 20 seconds
MLD snooping................................ Disabled
MLD timeout................................. 60 seconds
MLD query interval.......................... 20 seconds
User Idle Timeout........................... 300 seconds
ARP Idle Timeout............................ 300 seconds
--More or (q)uit current module or to abort
Cisco AP Default Master..................... Enabled
AP Join Priority............................ Disable
Mgmt Via Wireless Interface................. Enable
Mgmt Via Dynamic Interface.................. Enable
Bridge MAC filter Config.................... Enable
Bridge Security Mode........................ EAP
Mesh Full Sector DFS........................ Enable
AP Fallback ................................ Enable
Web Auth Redirect Ports .................... 80
Web Auth Proxy Redirect ................... Disable
Web Auth Captive-Bypass .................. Disable
Web Auth Secure Web ....................... Enable
Fast SSID Change ........................... Disabled
AP Discovery - NAT IP Only ................. Enabled
IP/MAC Addr Binding Check .................. Enabled
CCX-lite status ............................ Disable
oeap-600 dual-rlan-ports ................... Disable
oeap-600 local-network ..................... Enable
Press Enter to continue or to abort
Port Summary
STP Admin Physical Physical Link Link
Pr Type Stat Mode Mode Status Status Trap POE
1 Normal Forw Enable Auto 1000 Full Up Enable N/A
2 Normal Disa Enable Auto Auto Down Enable N/A
3 Normal Disa Enable Auto Auto Down Enable Enable (Power Off)
4 Normal Disa Enable Auto Auto Down Enable Enable (Power Off)
Press Enter to continue or to abort
AP Summary
Number of APs.................................... 14
Global AP User Name.............................. Not Configured
Global AP Dot1x User Name........................ Not Configured
AP Name Slots AP Model Ethernet MAC Location Port Country Priority
AP6c20.56a0.b352 2 AIR-LAP1262N-E-K9 6c:20:56:a0:b3:52 default location 1 SA 1
AP6c20.5666.e34a 2 AIR-LAP1262N-E-K9 6c:20:56:66:e3:4a default location 1 SA 1
AP6c20.56a0.b341 2 AIR-LAP1262N-E-K9 6c:20:56:a0:b3:41 default location 1 SA 1
AP6c20.56a0.b4db_(Expiry) 2 AIR-LAP1262N-E-K9 6c:20:56:a0:b4:db Expiry Warehouse 1 SA 1
AP6c20.569a.59da 2 AIR-LAP1262N-E-K9 6c:20:56:9a:59:da default location 1 SA 1
AP6c20.5666.e2db 2 AIR-LAP1262N-E-K9 6c:20:56:66:e2:db default location 1 SA 1
AP6c20.568c.d530_(Expiry) 2 AIR-LAP1262N-E-K9 6c:20:56:8c:d5:30 default location 1 SA 1
AP6c20.5666.e2ca 2 AIR-LAP1262N-E-K9 6c:20:56:66:e2:ca default location 1 SA 1
AP6c20.5666.e354 2 AIR-LAP1262N-E-K9 6c:20:56:66:e3:54 default location 1 SA 1
AP6c20.569a.59fd 2 AIR-LAP1262N-E-K9 6c:20:56:9a:59:fd default location 1 SA 1
AP6c20.56a0.b346 2 AIR-LAP1262N-E-K9 6c:20:56:a0:b3:46 default location 1 SA 1
AP6c20.56a0.b2f0 2 AIR-LAP1262N-E-K9 6c:20:56:a0:b2:f0 default location 1 SA 1
AP6c20.568c.d1ec 2 AIR-LAP1262N-E-K9 6c:20:56:8c:d1:ec default location 1 SA 1
AP6c20.56a0.b425 2 AIR-LAP1262N-E-K9 6c:20:56:a0:b4:25 default location 1 SA 1
--More or (q)uit current module or to abort
AP Tcp-Mss-Adjust Info
AP Name TCP State MSS Size
AP6c20.56a0.b352 disabled -
AP6c20.5666.e34a disabled -
AP6c20.56a0.b341 disabled -
AP6c20.56a0.b4db_(Expiry) disabled -
AP6c20.569a.59da disabled -
AP6c20.5666.e2db disabled -
AP6c20.568c.d530_(Expiry) disabled -
AP6c20.5666.e2ca disabled -
AP6c20.5666.e354 disabled -
AP6c20.569a.59fd disabled -
AP6c20.56a0.b346 disabled -
AP6c20.56a0.b2f0 disabled -
AP6c20.568c.d1ec disabled -
AP6c20.56a0.b425 disabled -
Press Enter to continue or to abort
AP Location
Total Number of AP Groups........................ 0
Site Name........................................ default-group
Site Description.................................
AP Operating Class............................... Not-configured
RF Profile
2.4 GHz band.....................................
5 GHz band.......................................
WLAN ID Interface Network Admission Control Radio Policy
1 management Disabled None
AP Name Slots AP Model Ethernet MAC Location Port Country Priority
AP6c20.56a0.b352 2 AIR-LAP1262N-E-K9 6c:20:56:a0:b3:52 default location 1 SA 1
AP6c20.5666.e34a 2 AIR-LAP1262N-E-K9 6c:20:56:66:e3:4a default location 1 SA 1
AP6c20.56a0.b341 2 AIR-LAP1262N-E-K9 6c:20:56:a0:b3:41 default location 1 SA 1
AP6c20.56a0.b4db_(Expiry) 2 AIR-LAP1262N-E-K9 6c:20:56:a0:b4:db Expiry Warehouse 1 SA 1
--More or (q)uit current module or to abort
AP6c20.569a.59da 2 AIR-LAP1262N-E-K9 6c:20:56:9a:59:da default location 1 SA 1
AP6c20.5666.e2db 2 AIR-LAP1262N-E-K9 6c:20:56:66:e2:db default location 1 SA 1
AP6c20.568c.d530_(Expiry) 2 AIR-LAP1262N-E-K9 6c:20:56:8c:d5:30 default location 1 SA 1
AP6c20.5666.e2ca 2 AIR-LAP1262N-E-K9 6c:20:56:66:e2:ca default location 1 SA 1
AP6c20.5666.e354 2 AIR-LAP1262N-E-K9 6c:20:56:66:e3:54 default location 1 SA 1
AP6c20.569a.59fd 2 AIR-LAP1262N-E-K9 6c:20:56:9a:59:fd default location 1 SA 1
AP6c20.56a0.b346 2 AIR-LAP1262N-E-K9 6c:20:56:a0:b3:46 default location 1 SA 1
AP6c20.56a0.b2f0 2 AIR-LAP1262N-E-K9 6c:20:56:a0:b2:f0 default location 1 SA 1
AP6c20.568c.d1ec 2 AIR-LAP1262N-E-K9 6c:20:56:8c:d1:ec default location 1 SA 1
AP6c20.56a0.b425 2 AIR-LAP1262N-E-K9 6c:20:56:a0:b4:25 default location 1 SA 1
Press Enter to continue or to abort
RF Profile
Number of RF Profiles............................ 0
Out Of Box State................................. Disabled
RF Profile Name Band Description Applied
Press Enter to continue or to abort
AP Config
Cisco AP Identifier.............................. 0
Cisco AP Name.................................... AP6c20.56a0.b352
Country code..................................... SA - Saudi Arabia
Regulatory Domain allowed by Country............. 802.11bg:-AE 802.11a:-E
AP Country code.................................. SA - Saudi Arabia
AP Regulatory Domain............................. -E
Switch Port Number .............................. 1
MAC Address...................................... 6c:20:56:a0:b3:52
IP Address Configuration......................... DHCP
IP Address....................................... 192.168.0.111
IP NetMask....................................... 255.255.255.0
Gateway IP Addr.................................. 192.168.0.220
NAT External IP Address.......................... None
CAPWAP Path MTU.................................. 1485
Telnet State..................................... Disabled
Ssh State........................................ Disabled
Cisco AP Location................................ default location
Cisco AP Group Name.............................. default-group
Primary Cisco Switch Name........................
Primary Cisco Switch IP Address.................. Not Configured
Secondary Cisco Switch Name......................
--More or (q)uit current module or to abort
Secondary Cisco Switch IP Address................ Not Configured
Tertiary Cisco Switch Name.......................
Tertiary Cisco Switch IP Address................. Not Configured
Administrative State ............................ ADMIN_ENABLED
Operation State ................................. REGISTERED
Mirroring Mode .................................. Disabled
AP Mode ......................................... Local
Public Safety ................................... Disabled
AP SubMode ...................................... Not Configured
Remote AP Debug ................................. Disabled
Logging trap severity level ..................... informational
Logging syslog facility ......................... kern
S/W Version .................................... 7.3.101.0
Boot Version ................................... 12.4.2.4
Mini IOS Version ................................ 7.3.1.73
Stats Reporting Period .......................... 180
LED State........................................ Enabled
PoE Pre-Standard Switch.......................... Disabled
PoE Power Injector MAC Addr...................... Disabled
Power Type/Mode.................................. Power injector / Normal mode
Number Of Slots.................................. 2
AP Model......................................... AIR-LAP1262N-E-K9
AP Image......................................... C1260-K9W8-M
--More or (q)uit current module or to abort
IOS Version...................................... 15.2(2)JA$
Reset Button..................................... Enabled
AP Serial Number................................. FCZ1642Z0A6
AP Certificate Type.............................. Manufacture Installed
AP User Mode..................................... CUSTOMIZED
AP User Name..................................... dawaa
AP Dot1x User Mode............................... Not Configured
AP Dot1x User Name............................... Not Configured
Cisco AP system logging host..................... 255.255.255.255
AP Up Time....................................... 0 days, 22 h 01 m 44 s
AP LWAPP Up Time................................. 0 days, 01 h 25 m 37 s
Join Date and Time............................... Wed Mar 13 16:10:25 2013
Join Taken Time.................................. 0 days, 00 h 02 m 19 s
Attributes for Slot 0
Radio Type................................... RADIO_TYPE_80211n-2.4
Administrative State ........................ ADMIN_ENABLED
Operation State ............................. UP
Radio Role .................................. ACCESS
CellId ...................................... 0
Station Configuration
--More or (q)uit current module or to abort
Configuration ............................. AUTOMATIC
Number Of WLANs ........................... 1
Medium Occupancy Limit .................... 100
CFP Period ................................ 4
CFP MaxDuration ........................... 60
BSSID ..................................... 1c:e6:c7:04:7a:20
Operation Rate Set
1000 Kilo Bits........................... SUPPORTED
2000 Kilo Bits........................... SUPPORTED
5500 Kilo Bits........................... SUPPORTED
11000 Kilo Bits.......................... MANDATORY
MCS Set
MCS 0.................................... DISABLED
MCS 1.................................... DISABLED
MCS 2.................................... SUPPORTED
MCS 3.................................... DISABLED
MCS 4.................................... DISABLED
MCS 5.................................... DISABLED
MCS 6.................................... DISABLED
MCS 7.................................... DISABLED
MCS 8.................................... DISABLED
MCS 9.................................... DISABLED
MCS 10................................... DISABLED
--More or (q)uit current module or to abort
MCS 11................................... DISABLED
MCS 12................................... DISABLED
MCS 13................................... DISABLED
MCS 14................................... DISABLED
MCS 15................................... DISABLED
MCS 16................................... DISABLED
MCS 17................................... DISABLED
MCS 18................................... DISABLED
MCS 19................................... DISABLED
MCS 20................................... DISABLED
MCS 21................................... DISABLED
MCS 22................................... DISABLED
MCS 23................................... DISABLED
Beacon Period ............................. 100
Fragmentation Threshold ................... 2346
Multi Domain Capability Implemented ....... TRUE
Multi Domain Capability Enabled ........... TRUE
Country String ............................ SA
Multi Domain Capability
Configuration ............................. AUTOMATIC
First Chan Num ............................ 1
Number Of Channels ........................ 13
--More or (q)uit current module or to abort
MAC Operation Parameters
Configuration ............................. AUTOMATIC
Fragmentation Threshold ................... 2346
Packet Retry Limit ........................ 64
Tx Power
Num Of Supported Power Levels ............. 8
Tx Power Level 1 .......................... 20 dBm
Tx Power Level 2 .......................... 17 dBm
Tx Power Level 3 .......................... 14 dBm
Tx Power Level 4 .......................... 11 dBm
Tx Power Level 5 .......................... 8 dBm
Tx Power Level 6 .......................... 5 dBm
Tx Power Level 7 .......................... 2 dBm
Tx Power Level 8 .......................... -1 dBm
Tx Power Configuration .................... AUTOMATIC
Current Tx Power Level .................... 3
Phy DSSS parameters
Configuration ............................. AUTOMATIC
Current Channel ........................... 6
Extension Channel ......................... NONE
--More or (q)uit current module or to abort
Channel Width.............................. 20 Mhz
Allowed Channel List....................... 1,2,3,4,5,6,7,8,9,10,11,12,
......................................... 13
Current CCA Mode .......................... 0
ED Threshold .............................. -50
Legacy Tx Beamforming Configuration ....... CUSTOMIZED
Legacy Tx Beamforming ..................... ENABLED
Antenna Type............................... EXTERNAL_ANTENNA
External Antenna Gain (in .5 dBi units).... 0
Diversity.................................. DIVERSITY_ENABLED
802.11n Antennas
A....................................... ENABLED
B....................................... ENABLED
C....................................... ENABLED
Performance Profile Parameters
Configuration ............................. AUTOMATIC
Interference threshold..................... 10 %
Noise threshold............................ -70 dBm
RF utilization threshold................... 80 %
Data-rate threshold........................ 1000000 bps
Client threshold........................... 12 clients
Coverage SNR threshold..................... 12 dB
--More or (q)uit current module or to abort
Coverage exception level................... 25 %
Client minimum exception level............. 3 clients
Rogue Containment Information
Containment Count............................ 0
CleanAir Management Information
CleanAir Capable......................... No
Radio Extended Configurations
Beacon period.............................. 100 milliseconds
Beacon range............................... AUTO
Multicast buffer........................... AUTO
Multicast data-rate........................ AUTO
RX SOP threshold........................... AUTO
CCA threshold.............................. AUTO
Cisco AP Identifier.............................. 0
Cisco AP Name.................................... AP6c20.56a0.b352
Country code..................................... SA - Saudi Arabia
Regulatory Domain allowed by Country............. 802.11bg:-AE 802.11a:-E
AP Country code.................................. SA - Saudi Arabia
AP Regulatory Domain............................. -E
Switch Port Number .............................. 1
--More or (q)uit current module or to abort
MAC Address...................................... 6c:20:56:a0:b3:52
IP Address Configuration......................... DHCP
IP Address....................................... 192.168.0.111
IP NetMask....................................... 255.255.255.0
Gateway IP Addr.................................. 192.168.0.220
NAT External IP Address.......................... None
CAPWAP Path MTU.................................. 1485
Telnet State..................................... Disabled
Ssh State........................................ Disabled
Cisco AP Location................................ default location
Cisco AP Group Name.............................. default-group
Primary Cisco Switch Name........................
Primary Cisco Switch IP Address.................. Not Configured
Secondary Cisco Switch Name......................
Secondary Cisco Switch IP Address................ Not Configured
Tertiary Cisco Switch Name.......................
Tertiary Cisco Switch IP Address................. Not Configured
Administrative State ............................ ADMIN_ENABLED
Operation State ................................. REGISTERED
Mirroring Mode .................................. Disabled
AP Mode ......................................... Local
Public Safety ................................... Disabled
AP SubMode ...................................... Not Configured
--More or (q)uit current module or to abort
Remote AP Debug ................................. Disabled
Logging trap severity level ..................... informational
Logging syslog facility ......................... kern
S/W Version .................................... 7.3.101.0
Boot Version ................................... 12.4.2.4
Mini IOS Version ................................ 7.3.1.73
Stats Reporting Period .......................... 180
LED State........................................ Enabled
PoE Pre-Standard Switch.......................... Disabled
PoE Power Injector MAC Addr...................... Disabled
Power Type/Mode.................................. Power injector / Normal mode
Number Of Slots.................................. 2
AP Model......................................... AIR-LAP1262N-E-K9
AP Image......................................... C1260-K9W8-M
IOS Version...................................... 15.2(2)JA$
Reset Button..................................... Enabled
AP Serial Number................................. FCZ1642Z0A6
AP Certificate Type.............................. Manufacture Installed
AP User Mode..................................... CUSTOMIZED
AP User Name..................................... dawaa
AP Dot1x User Mode............................... Not Configured
AP Dot1x User Name............................... Not Configured
Cisco AP system logging host..................... 255.255.255.255
--More or (q)uit current module or to abort
AP Up Time....................................... 0 days, 22 h 01 m 44 s
AP LWAPP Up Time................................. 0 days, 01 h 25 m 37 s
Join Date and Time............................... Wed Mar 13 16:10:25 2013
Join Taken Time.................................. 0 days, 00 h 02 m 19 s
Attributes for Slot 1
Radio Type................................... RADIO_TYPE_80211n-5
Radio Subband................................ RADIO_SUBBAND_ALL
Administrative State ........................ ADMIN_ENABLED
Operation State ............................. UP
Radio Role .................................. ACCESS
CellId ...................................... 0
Station Configuration
Configuration ............................. AUTOMATIC
Number Of WLANs ........................... 1
Medium Occupancy Limit .................... 100
CFP Period ................................ 4
CFP MaxDuration ........................... 60
BSSID ..................................... 1c:e6:c7:04:7a:20
Operation Rate Set
6000 Kilo Bits........................... MANDATORY
--More or (q)uit current module or to abort
9000 Kilo Bits........................... SUPPORTED
12000 Kilo Bits.......................... MANDATORY
18000 Kilo Bits.......................... SUPPORTED
24000 Kilo Bits.......................... MANDATORY
36000 Kilo Bits.......................... SUPPORTED
48000 Kilo Bits.......................... SUPPORTED
54000 Kilo Bits.......................... SUPPORTED
MCS Set
MCS 0.................................... DISABLED
MCS 1.................................... DISABLED
MCS 2.................................... DISABLED
MCS 3.................................... SUPPORTED
MCS 4.................................... SUPPORTED
MCS 5.................................... SUPPORTED
MCS 6.................................... SUPPORTED
MCS 7.................................... SUPPORTED
MCS 8.................................... SUPPORTED
MCS 9.................................... SUPPORTED
MCS 10................................... SUPPORTED
MCS 11................................... SUPPORTED
MCS 12................................... SUPPORTED
MCS 13................................... SUPPORTED
MCS 14................................... SUPPORTED
--More or (q)uit current module or to abort
MCS 15................................... SUPPORTED
MCS 16................................... DISABLED
MCS 17................................... DISABLED
MCS 18................................... DISABLED
MCS 19................................... DISABLED
MCS 20................................... DISABLED
MCS 21................................... DISABLED
MCS 22................................... DISABLED
MCS 23................................... DISABLED
Beacon Period ............................. 100
Fragmentation Threshold ................... 2346
Multi Domain Capability Implemented ....... TRUE
Multi Domain Capability Enabled ........... TRUE
Country String ............................ SA
Multi Domain Capability
Configuration ............................. AUTOMATIC
First Chan Num ............................ 36
Number Of Channels ........................ 4
MAC Operation Parameters
Configuration ............................. AUTOMATIC
Fragmentation Threshold ................... 2346
--More or (q)uit current module or to abort
Packet Retry Limit ........................ 64
Tx Power
Num Of Supported Power Levels ............. 7
Tx Power Level 1 .......................... 17 dBm
Tx Power Level 2 .......................... 14 dBm
Tx Power Level 3 .......................... 11 dBm
Tx Power Level 4 .......................... 8 dBm
Tx Power Level 5 .......................... 5 dBm
Tx Power Level 6 .......................... 2 dBm
Tx Power Level 7 .......................... -1 dBm
Tx Power Configuration .................... AUTOMATIC
Current Tx Power Level .................... 1
Phy OFDM parameters
Configuration ............................. AUTOMATIC
Current Channel ........................... 36
Extension Channel ......................... NONE
Channel Width.............................. 20 Mhz
Allowed Channel List....................... 36,40,44,48,52,56,60,64,100,
......................................... 104,108,112,116,132,136,140
TI Threshold .............................. -50
Legacy Tx Beamforming Configuration ....... CUSTOMIZED
--More or (q)uit current module or to abort
Legacy Tx Beamforming ..................... ENABLED
Antenna Type............................... EXTERNAL_ANTENNA
External Antenna Gain (in .5 dBi units).... 0
Diversity.................................. DIVERSITY_ENABLED
802.11n Antennas
A....................................... ENABLED
B....................................... ENABLED
C....................................... ENABLED
Performance Profile Parameters
Configuration ............................. AUTOMATIC
Interference threshold..................... 10 %
Noise threshold............................ -70 dBm
RF utilization threshold................... 80 %
Data-rate threshold........................ 1000000 bps
Client threshold........................... 12 clients
Coverage SNR threshold..................... 16 dB
Coverage exception level................... 25 %
Client minimum exception level............. 3 clients
Rogue Containment Information
Containment Count............................ 0
CleanAir Management Information
--More or (q)uit current module or to abort
CleanAir Capable......................... No
Radio Extended Configurations
Beacon period.............................. 100 milliseconds
Beacon range............................... AUTO
Multicast buffer........................... AUTO
Multicast data-rate........................ AUTO
RX SOP threshold........................... AUTO
CCA threshold.............................. AUTO
Press Enter to continue or to abort
Cisco AP Identifier.............................. 1
Cisco AP Name.................................... AP6c20.5666.e34a
Country code..................................... SA - Saudi Arabia
Regulatory Domain allowed by Country............. 802.11bg:-AE 802.11a:-E
AP Country code.................................. SA - Saudi Arabia
AP Regulatory Domain............................. -E
Switch Port Number .............................. 1
MAC Address...................................... 6c:20:56:66:e3:4a
IP Address Configuration......................... DHCP
IP Address....................................... 192.168.0.39
IP NetMask....................................... 255.255.255.0
Gateway IP Addr.................................. 192.168.0.220
NAT External IP Address.......................... None
CAPWAP Path MTU.................................. 1485
Telnet State..................................... Disabled
Ssh State........................................ Disabled
Cisco AP Location................................ default location
Cisco AP Group Name.............................. default-group
Primary Cisco Switch Name........................
Primary Cisco Switch IP Address.................. Not Configured
Secondary Cisco Switch Name......................
Secondary Cisco Switch IP Address................ Not Configured
--More or (q)uit current module or to abort
Tertiary Cisco Switch Name.......................
Tertiary Cisco Switch IP Address................. Not Configured
Administrative State ............................ ADMIN_ENABLED
Operation State ................................. REGISTERED
Mirroring Mode .................................. Disabled
AP Mode ......................................... Local
Public Safety ................................... Disabled
AP SubMode ...................................... Not Configured
Remote AP Debug ................................. Disabled
Logging trap severity level ..................... informational
Logging syslog facility ......................... kern
S/W Version .................................... 7.3.101.0
Boot Version ................................... 12.4.2.4
Mini IOS Version ................................ 7.3.1.73
Stats Reporting Period .......................... 180
LED State........................................ Enabled
PoE Pre-Standard Switch.......................... Disabled
PoE Power Injector MAC Addr...................... Disabled
Power Type/Mode.................................. Power injector / Normal mode
Number Of Slots.................................. 2
AP Model......................................... AIR-LAP1262N-E-K9
AP Image......................................... C1260-K9W8-M
IOS Version...................................... 15.2(2)JA$
--More or (q)uit current module or to abort
Reset Button..................................... Enabled
AP Serial Number................................. FCZ1642Z09V
AP Certificate Type.............................. Manufacture Installed
AP User Mode..................................... AUTOMATIC
AP User Name..................................... Not Configured
AP Dot1x User Mode............................... Not Configured
AP Dot1x User Name............................... Not Configured
Cisco AP system logging host..................... 255.255.255.255
AP Up Time....................................... 0 days, 22 h 03 m 17 s
AP LWAPP Up Time................................. 0 days, 01 h 28 m 23 s
Join Date and Time............................... Wed Mar 13 16:10:26 2013
Join Taken Time.................................. 0 days, 00 h 02 m 04 s
Attributes for Slot 0
Radio Type................................... RADIO_TYPE_80211n-2.4
Administrative State ........................ ADMIN_ENABLED
Operation State ............................. UP
Radio Role .................................. ACCESS
CellId ...................................... 0
Station Configuration
Configuration ............................. AUTOMATIC
--More or (q)uit current module or to abort
Number Of WLANs ........................... 1
Medium Occupancy Limit .................... 100
CFP Period ................................ 4
CFP MaxDuration ........................... 60
BSSID ..................................... 54:78:1a:f2:51:c0
Operation Rate Set
1000 Kilo Bits........................... SUPPORTED
2000 Kilo Bits........................... SUPPORTED
5500 Kilo Bits........................... SUPPORTED
11000 Kilo Bits.......................... MANDATORY
MCS Set
MCS 0.................................... DISABLED
MCS 1.................................... DISABLED
MCS 2.................................... SUPPORTED
MCS 3.................................... DISABLED
MCS 4.................................... DISABLED
MCS 5.................................... DISABLED
MCS 6.................................... DISABLED
MCS 7.................................... DISABLED
MCS 8.................................... DISABLED
MCS 9.................................... DISABLED
MCS 10................................... DISABLED
MCS 11................................... DISABLED
--More or (q)uit current module or to abort
MCS 12................................... DISABLED
MCS 13................................... DISABLED
MCS 14................................... DISABLED
MCS 15................................... DISABLED
MCS 16................................... DISABLED
MCS 17................................... DISABLED
MCS 18................................... DISABLED
MCS 19................................... DISABLED
MCS 20................................... DISABLED
MCS 21................................... DISABLED
MCS 22................................... DISABLED
MCS 23................................... DISABLED
Beacon Period ............................. 100
Fragmentation Threshold ................... 2346
Multi Domain Capability Implemented ....... TRUE
Multi Domain Capability Enabled ........... TRUE
Country String ............................ SA
Multi Domain Capability
Configuration ............................. AUTOMATIC
First Chan Num ............................ 1
Number Of Channels ........................ 13
--More or (q)uit current module or to abort
MAC Operation Parameters
Configuration ............................. AUTOMATIC
Fragmentation Threshold ................... 2346
Packet Retry Limit ........................ 64
Tx Power
Num Of Supported Power Levels ............. 8
Tx Power Level 1 .......................... 20 dBm
Tx Power Level 2 .......................... 17 dBm
Tx Power Level 3 .......................... 14 dBm
Tx Power Level 4 .......................... 11 dBm
Tx Power Level 5 .......................... 8 dBm
Tx Power Level 6 .......................... 5 dBm
Tx Power Level 7 .......................... 2 dBm
Tx Power Level 8 .......................... -1 dBm
Tx Power Configuration .................... AUTOMATIC
Current Tx Power Level .................... 2
Phy DSSS parameters
Configuration ............................. AUTOMATIC
Current Channel ........................... 1
Extension Channel ......................... NONE
Channel Width.............................. 20 Mhz
--More or (q)uit current module or to abort
Allowed Channel List....................... 1,2,3,4,5,6,7,8,9,10,11,12,
......................................... 13
Current CCA Mode .......................... 0
ED Threshold .............................. -50
Legacy Tx Beamforming Configuration ....... CUSTOMIZED
Legacy Tx Beamforming ..................... ENABLED
Antenna Type............................... EXTERNAL_ANTENNA
External Antenna Gain (in .5 dBi units).... 0
Diversity.................................. DIVERSITY_ENABLED
802.11n Antennas
A....................................... ENABLED
B....................................... ENABLED
C....................................... ENABLED
Performance Profile Parameters
Configuration ............................. AUTOMATIC
Interference threshold..................... 10 %
Noise threshold............................ -70 dBm
RF utilization threshold................... 80 %
Data-rate threshold........................ 1000000 bps
Client threshold........................... 12 clients
Coverage SNR threshold..................... 12 dB
Coverage exception level................... 25 %
--More or (q)uit current module or to abort
Client minimum exception level............. 3 clients
Rogue Containment Information
Containment Count............................ 0
CleanAir Management Information
CleanAir Capable......................... No
Radio Extended Configurations
Beacon period.............................. 100 milliseconds
Beacon range............................... AUTO
Multicast buffer........................... AUTO
Multicast data-rate........................ AUTO
RX SOP threshold........................... AUTO
CCA threshold.............................. AUTO
Cisco AP Identifier.............................. 1
Cisco AP Name.................................... AP6c20.5666.e34a
Country code..................................... SA - Saudi Arabia
Regulatory Domain allowed by Country............. 802.11bg:-AE 802.11a:-E
AP Country code.................................. SA - Saudi Arabia
AP Regulatory Domain............................. -E
Switch Port Number .............................. 1
MAC Address...................................... 6c:20:56:66:e3:4a
--More or (q)uit current module or to abort
IP Address Configuration......................... DHCP
IP Address....................................... 192.168.0.39
IP NetMask....................................... 255.255.255.0
Gateway IP Addr.................................. 192.168.0.220
NAT External IP Address.......................... None
CAPWAP Path MTU.................................. 1485
Telnet State..................................... Disabled
Ssh State........................................ Disabled
Cisco AP Location................................ default location
Cisco AP Group Name.............................. default-group
Primary Cisco Switch Name........................
Primary Cisco Switch IP Address.................. Not Configured
Secondary Cisco Switch Name......................
Secondary Cisco Switch IP Address................ Not Configured
Tertiary Cisco Switch Name.......................
Tertiary Cisco Switch IP Address................. Not Configured
Administrative State ............................ ADMIN_ENABLED
Operation State ................................. REGISTERED
Mirroring Mode .................................. Disabled
AP Mode ......................................... Local
Public Safety ................................... Disabled
AP SubMode ...................................... Not Configured
Remote AP Debug ................................. Disabled
--More or (q)uit current module or to abort
Logging trap severity level ..................... informational
Logging syslog facility ......................... kern
S/W Version .................................... 7.3.101.0
Boot Version ................................... 12.4.2.4
Mini IOS Version ................................ 7.3.1.73
Stats Reporting Period .......................... 180
LED State........................................ Enabled
PoE Pre-Standard Switch.......................... Disabled
PoE Power Injector MAC Addr...................... Disabled
Power Type/Mode.................................. Power injector / Normal mode
Number Of Slots.................................. 2
AP Model......................................... AIR-LAP1262N-E-K9
AP Image......................................... C1260-K9W8-M
IOS Version...................................... 15.2(2)JA$
Reset Button..................................... Enabled
AP Serial Number................................. FCZ1642Z09V
AP Certificate Type.............................. Manufacture Installed
AP User Mode..................................... AUTOMATIC
AP User Name..................................... Not Configured
AP Dot1x User Mode............................... Not Configured
AP Dot1x User Name............................... Not Configured
Cisco AP system logging host..................... 255.255.255.255
AP Up Time....................................... 0 days, 22 h 03 m 17 s
--More or (q)uit current module or to abort
AP LWAPP Up Time................................. 0 days, 01 h 28 m 23 s
Join Date and Time............................... Wed Mar 13 16:10:26 2013
Join Taken Time.................................. 0 days, 00 h 02 m 04 s
Attributes for Slot 1
Radio Type................................... RADIO_TYPE_80211n-5
Radio Subband................................ RADIO_SUBBAND_ALL
Administrative State ........................ ADMIN_ENABLED
Operation State ............................. UP
Radio Role .................................. ACCESS
CellId ...................................... 0
Station Configuration
Configuration ............................. AUTOMATIC
Number Of WLANs ........................... 1
Medium Occupancy Limit .................... 100
CFP Period ................................ 4
CFP MaxDuration ........................... 60
BSSID ..................................... 54:78:1a:f2:51:c0
Operation Rate Set
6000 Kilo Bits........................... MANDATORY
9000 Kilo Bits........................... SUPPORTED
--More or (q)uit current module or to abort
12000 Kilo Bits.......................... MANDATORY
18000 Kilo Bits.......................... SUPPORTED
24000 Kilo Bits.......................... MANDATORY
36000 Kilo Bits.......................... SUPPORTED
48000 Kilo Bits.......................... SUPPORTED
54000 Kilo Bits.......................... SUPPORTED
MCS Set
MCS 0.................................... DISABLED
MCS 1.................................... DISABLED
MCS 2.................................... DISABLED
MCS 3.................................... SUPPORTED
MCS 4.................................... SUPPORTED
MCS 5.................................... SUPPORTED
MCS 6.................................... SUPPORTED
MCS 7.................................... SUPPORTED
MCS 8.................................... SUPPORTED
MCS 9.................................... SUPPORTED
MCS 10................................... SUPPORTED
MCS 11................................... SUPPORTED
MCS 12................................... SUPPORTED
MCS 13................................... SUPPORTED
MCS 14................................... SUPPORTED
MCS 15................................... SUPPORTED
--More or (q)uit current module or to abort
MCS 16................................... DISABLED
MCS 17................................... DISABLED
MCS 18................................... DISABLED
MCS 19................................... DISABLED
MCS 20................................... DISABLED
MCS 21................................... DISABLED
MCS 22................................... DISABLED
MCS 23................................... DISABLED
Beacon Period ............................. 100
Fragmentation Threshold ................... 2346
Multi Domain Capability Implemented ....... TRUE
Multi Domain Capability Enabled ........... TRUE
Country String ............................ SA
Multi Domain Capability
Configuration ............................. AUTOMATIC
First Chan Num ............................ 36
Number Of Channels ........................ 4
MAC Operation Parameters
Configuration ............................. AUTOMATIC
Fragmentation Threshold ................... 2346
Packet Retry Limit ........................ 64
--More or (q)uit current module or to abort
Tx Power
Num Of Supported Power Levels ............. 7
Tx Power Level 1 .......................... 17 dBm
Tx Power Level 2 .......................... 14 dBm
Tx Power Level 3 .......................... 11 dBm
Tx Power Level 4 .......................... 8 dBm
Tx Power Level 5 .......................... 5 dBm
Tx Power Level 6 .......................... 2 dBm
Tx Power Level 7 .......................... -1 dBm
Tx Power Configuration .................... AUTOMATIC
Current Tx Power Level .................... 1
Phy OFDM parameters
Configuration ............................. AUTOMATIC
Current Channel ........................... 64
Extension Channel ......................... NONE
Channel Width.............................. 20 Mhz
Allowed Channel List....................... 36,40,44,48,52,56,60,64,100,
......................................... 104,108,112,116,132,136,140
TI Threshold .............................. -50
Legacy Tx Beamforming Configuration ....... CUSTOMIZED
Legacy Tx Beamforming ..................... ENABLED
--More or (q)uit current module or to abort
Antenna Type............................... EXTERNAL_ANTENNA
External Antenna Gain (in .5 dBi units).... 0
Diversity.................................. DIVERSITY_ENABLED
802.11n Antennas
A....................................... ENABLED
B....................................... ENABLED
C....................................... ENABLED
Performance Profile Parameters
Configuration ............................. AUTOMATIC
Interference threshold..................... 10 %
Noise threshold............................ -70 dBm
RF utilization threshold................... 80 %
Data-rate threshold........................ 1000000 bps
Client threshold........................... 12 clients
Coverage SNR threshold..................... 16 dB
Coverage exception level................... 25 %
Client minimum exception level............. 3 clients
Rogue Containment Information
Containment Count............................ 0
CleanAir Management Information
CleanAir Capable......................... No
--More or (q)uit current module or to abort
Radio Extended Configurations
Beacon period.............................. 100 milliseconds
Beacon range............................... AUTO
Multicast buffer........................... AUTO
Multicast data-rate........................ AUTO
RX SOP threshold........................... AUTO
CCA threshold.............................. AUTO
Press Enter to continue or to abort
Cisco AP Identifier.............................. 2
Cisco AP Name.................................... AP6c20.56a0.b341
Country code..................................... SA - Saudi Arabia
Regulatory Domain allowed by Country............. 802.11bg:-AE 802.11a:-E
AP Country code.................................. SA - Saudi Arabia
AP Regulatory Domain............................. -E
Switch Port Number .............................. 1
MAC Address...................................... 6c:20:56:a0:b3:41
IP Address Configuration......................... DHCP
IP Address....................................... 192.168.0.120
IP NetMask....................................... 255.255.255.0
Gateway IP Addr.................................. 192.168.0.220
NAT External IP Address.......................... None
CAPWAP Path MTU.................................. 1485
Telnet State..................................... Disabled
Ssh State........................................ Disabled
Cisco AP Location................................ default location
Cisco AP Group Name.............................. default-group
Primary Cisco Switch Name........................
Primary Cisco Switch IP Address.................. Not Configured
Secondary Cisco Switch Name......................
Secondary Cisco Switch IP Address................ Not Configured
--More or (q)uit current module or to abort
Tertiary Cisco Switch Name.......................
Tertiary Cisco Switch IP Address................. Not Configured
Administrative State ............................ ADMIN_ENABLED
Operation State ................................. REGISTERED
Mirroring Mode .................................. Disabled
AP Mode ......................................... Local
Public Safety ................................... Disabled
AP SubMode ...................................... Not Configured
Remote AP Debug ................................. Disabled
Logging trap severity level ..................... informational
Logging syslog facility ......................... kern
S/W Version .................................... 7.3.101.0
Boot Version ................................... 12.4.2.4
Mini IOS Version ................................ 7.3.1.73
Stats Reporting Period .......................... 180
LED State........................................ Enabled
PoE Pre-Standard Switch.......................... Disabled
PoE Power Injector MAC Addr...................... Disabled
Power Type/Mode.................................. Power injector / Normal mode
Number Of Slots.................................. 2
AP Model......................................... AIR-LAP1262N-E-K9
AP Image......................................... C1260-K9W8-M
IOS Version...................................... 15.2(2)JA$
--More or (q)uit current module or to abort
Reset Button..................................... Enabled
AP Serial Number................................. FCZ1642Z09Y
AP Certificate Type.............................. Manufacture Installed
AP User Mode..................................... CUSTOMIZED
AP User Name..................................... dawaa
AP Dot1x User Mode............................... Not Configured
AP Dot1x User Name............................... Not Configured
Cisco AP system logging host..................... 255.255.255.255
AP Up Time....................................... 0 days, 22 h 07 m 08 s
AP LWAPP Up Time................................. 0 days, 01 h 31 m 05 s
Join Date and Time............................... Wed Mar 13 16:10:26 2013
Join Taken Time.................................. 0 days, 00 h 02 m 19 s
Attributes for Slot 0
Radio Type................................... RADIO_TYPE_80211n-2.4
Administrative State ........................ ADMIN_ENABLED
Operation State ............................. UP
Radio Role .................................. ACCESS
CellId ...................................... 0
Station Configuration
Configuration ............................. AUTOMATIC
--More or (q)uit current module or to abort
Number Of WLANs ........................... 1
Medium Occupancy Limit .................... 100
CFP Period ................................ 4
CFP MaxDuration ........................... 60
BSSID ..................................... 1c:e6:c7:04:81:f0
Operation Rate Set
1000 Kilo Bits........................... SUPPORTED
2000 Kilo Bits........................... SUPPORTED
5500 Kilo Bits........................... SUPPORTED
11000 Kilo Bits.......................... MANDATORY
MCS Set
MCS 0.................................... DISABLED
MCS 1.................................... DISABLED
MCS 2.................................... SUPPORTED
MCS 3.................................... DISABLED
MCS 4.................................... DISABLED
MCS 5.................................... DISABLED
MCS 6.................................... DISABLED
MCS 7.................................... DISABLED
MCS 8.................................... DISABLED
MCS 9.................................... DISABLED
MCS 10................................... DISABLED
MCS 11................................... DISABLED
--More or (q)uit current module or to abort
MCS 12................................... DISABLED
MCS 13................................... DISABLED
MCS 14................................... DISABLED
MCS 15................................... DISABLED
MCS 16................................... DISABLED
MCS 17................................... DISABLED
MCS 18................................... DISABLED
MCS 19................................... DISABLED
MCS 20................................... DISABLED
MCS 21................................... DISABLED
MCS 22................................... DISABLED
MCS 23................................... DISABLED
Beacon Period ............................. 100
Fragmentation Threshold ................... 2346
Multi Domain Capability Implemented ....... TRUE
Multi Domain Capability Enabled ........... TRUE
Country String ..............
Maybe you are looking for
-
Hello: I just came into possession of a G5 imac that I'm trying to upgrade to 10.5 Leopard. It's a: 1.8Ghz G5 1.5 GB ram 80Gig HD Unfortunately, when I pop in the 10.5 install dvd & select install......reboot.....during the reboot process, the system
-
Problem with Back and Next Buttons: a solution?
Hello, It is well known that including the Back and/or Next buttons in Captivate quiz questions presents real problems. I have come up with what I think to be a solution. It should allow one to include both Back and Next buttons, if one wants to do t
-
How to go around the enter key
Hi all, I have the data show on the grid. I modified it and didn't press the enter key, the commit (save) icon in the navigator bar doesn't high light. Is there a way to go around that? Make it high light whenever the data change. Thanks null
-
I use the cinnamon desktop. I just did a system update, and now, I get a behavior where after I log in there is a delay before conky and the icons on the desktop appear. There are messages in the journal the would appear to be relevant, but I don't q
-
How to decide between call transaction and session methods.which one to use for data transfer? and how to schedule session method in background mode? Moderator message - Please search before asking - post locked Edited by: Rob Burbank on Nov 23, 2009