Display line item based on GL Code in BPS.

Hi Experts,
I have one requirement for BPS.
When the user Enter Plan data, it will prompt a variable 0GL_ACCOUNT for user to enter the gl code.
Based on the 0GL_ACCOUNT code selected by user, the system should be automatically display the line items.
The line items could be from material group and under the material group have a lists of material no/items.
If the GL Code that selected is Asset then it should display the related asset line items (Asset subnum).
What should do to make this senario happen, it is controlling from 0GL_ACCOUNT hierarchy?
How to make this happen?
Pls advise. This is my first BPS project.
Appreciate and Thanks in advance.
Regards,
Jamie

Hi Anurag,
Thanks for your respond.
No, it is refering to plan data.
Users want to plan the yearly budget based on line items.
Example:
User select GL Code (Variable): 100010
Planning layout should display:
Material Group : 90001 Desc: Stationary
Material No.----Quantity--Unit-----Amount
A0001 Pen
A0011 2BPencil
A3061 Eraser
The user will only responsible to enter the budget for quantity, Unit and Amount.
After finish budget for this gl code user will select
another GL Code
User select GL Code (Variable): 300010
Asset No : 123456 Vehicle
Asset Sub-No.----Quantity--Unit----Amount
123-001 BMW
123-023 BUS
It is possible to be done?
Regards,
Jamie

Similar Messages

Problem in display line items in FS10N

Hi all,
I have checked ,check box in G/L account "Line items display " in FS00 in current period ( 4 / 2014 )after that line items get displayed in FS10N for this period .
There is problem in displaying line items for same G/L account with previous all periods such as 3/2014,2/2014,1/2014.
I have tried report "RFSEPA01" it works fine if we enter document number for selection with other parameters ,but it gives error if we run report with just Company code and G/L account .
Please provide any other way to get item details for previous periods or is there any update on report "RFSEPA01".
Please let me know why this issue occurred, if we activated the line item display for the particular G/L account in between the Posting period
Thanks,

Hi,
You can check below two programs
RFSEPA01 - for line item display
RFSEPA02 - for open item display
Steps to follow:
1. Block the G/L account from posting
2. Run both programs
3. Unblock the G/L account
this will make the earlier posted items visible.
Regards,
Jyoti

Error display line items

Hi Gurus,
please help me on this error.. what to do?
No line item display possible for account 41000010 1000
Message no. F4430
Diagnosis
You have determined that displaying line items is not to be possible for G/L account 41000010 in company code 1000.
Procedure
It is presumably a clearing account (incoming check account, GR/IR clearing account) which has its own reports for analysis.

Hi,
Intally GOTO FS00 and tick the line item display and then GOTO SE38 and give program RFSEPA01 and execute .
then GIVE co code and GL account number
Documemt 1-999999999
hope this solve your problem
regards,
Santosh kumar

Display line items in Cells of a table- Smartform

Hello All,
Can any one help me achieving the below requirement.
I have a requirement of printing invoice with a smartform. I am displaying line items from a TABLE node by looping VBRP's internal table. There are 12 cells and the 5 th cell contains a number of Dicount rates.
I am displaying these discount rates from LOOP node by looping KONV's internal table within that CELL. The 7 th Cell has got 2 values which are required to be: one aligned to the TOP right corner of the cell and the other to the bottom right side of the cell.
Now the issue description is:
CELL-5: Contains unknown number of values for display within the cell to be positioned as MIDDLE justified for an item(POSNR) of the main item table.
CELL-7: Contains two fixed values :KWERT to be at Top right of the CELL-7and NETWR at the bottom right of CELL-7
I have managed to display the sub items in CELL-5 in the middle by giving values to SPACE BEFORE/SPACE AFTER sections of PARAGRAPH FORMAT in SMART STYLE.
Requirement: Irrespective of number of sub items in CELL-5 the 2 values in CELL- 7 to be aligned as one at the top right and the other to the bottom right cell flexibly . Same applies to other items(POSNR) of MAIN VBRP item table.
The ROWS of the MAIN Table to be flexible enough to shrink the space when then are less number of subitems in   CELL-5.
Values in Cell-7 should be adjusted according to contents in CELL-5.
Thanks in advance for your valuable suggestions.

Hi,
Do one thing while filling the 5th cell , count the number of values(counter) in it for each record and fill new internal table (Itab_cell7) as follws.
DATA : FLAG,
counter1 type n.
DO COUNTER TIMES.
counter1 = counter1 + 1.
CLEAR FLAG.
IF counter = 1.
    WA_CELL7-VALUE = KWERT.
    APPEND WA_CELL7 TO ITAB_CELL7.
    FLAG = 'X'.
ENDIF.
IF counter1 = (counter1 - 1).
    WA_CELL7-VALUE = KWERT.
    APPEND WA_CELL7 TO ITAB_CELL7.
    FLAG = 'X'.
EXIT.
ENDIF.
IF FLAG NE 'X'.
WA_CELL7-VALUE = ''.
APPEND WA_CELL7 TO ITAB_CELL7.
ENDIF.
ENDDO.
Adjust the code if need as per your data.
In cell 7 under loop node print ITAB_CELL7 values in a text. and prepare a paragragh for alingment.
if it does not work for send me the XML file for your smartform.
Regards,
Antim

Display line items not possible!

Hello
I've a very strange situation on the productive system:
I have a company code that registers and display account line items, while the second cannot display them, even if I've configurated the same aspects in account fields for the two company codes. That means they have the same
- flag on display line items AND
- sort key 001 - POSTING DATE
why??
thanks a lot in advance,
Chiara

No, the answer was not that one, but thanks anyway.
Finally I found the answer in
Forum: Message MSITEM033 in New GL - Cannot Display GL Line Items
note OSS:
- 1323960 Incorrect entry '/' in SKB1-XLGCLR and BSEG-XLGCLR
- 1149500 Clearing open items by batch input selection
- 1437341 Note 1437341 - Correction of BSEG/Index tables after note 1323960
regards,
Chiara

COPA Realignments for line item based reports

Hi Guru
I built two CO-PA line item based reports in our environment. Now , there are some organizational changes in our environment and Now I have re-derive a characteristic from customer master data. Does those changes reflect in my line item based reports, If i run Re-Alignments (KEND)?
Thanks in advance

Line item reports (defined w/KE91) will reflect the realignment. Line item display (KE24/KE25) will give you the choice of reading the original posting or the realigned data.

How to display line items twice in a single page in sap script

HI,
I am working on check printing. I copied the standard driver program and form to Zprogram and ZForm. Which are RFFOUS_C(print program) and F110_PRENUM_CHECK(Form Name).
I want to display the line items twice in the same page and sub sequent pages.
Currently I am able to display line items only once.
Example:
PAGE1.
line item1
line item2
line item3
line item4
line item5
line item1
line item2
line item3
line item4
line item5
line items 1 to 5 which are in main window.
How to achive this problem.
Regards,
vinod

Hi
I had the same request for a check form in Canada. I solved it by writing the line item output into variables and print these variables in a second window. It was ~10 hours of effort, not a real nice technical solution but it worked.
If you require I can send you a PDF of the sap script form definition. You can contact me at [email protected] Answers can take 1 week or more.
Best regards
JD

How to add new line item based on main item using crm_order_maintain

Hi All,
can you please provide a way to create a new line item based on main line item and save in crm transaction( in house repair order) by using crm_order_maintain(from SAP GUI).
Thanks,
vinod.

Hi Vinod,
The relationship with main item is stored with CRMD_ORDERADM_I- Parent.
You need to pass the guid of main item to orderadm_i-parent. This will keep the relationship with main item.
Thanks
Ajay

Displaying line items, although not activated in FS00

Hi everyone!
I've got a question about line items.
I had created a GL account, and in it's master record I didn't activated Display line item. But, when I call transaction for displaying GL account's line items (FAGLL03), I can see line items?
How is that possible?
I know that there are some special cases, for example expense accounts: for every expense account there is a cost element in CO, and no matter settings in FS00, for expense account there is always line item display. Similary, reconciliation accounts always have open items management, irrespective of settings in FS00.
But this is just regular account, with very few settings in master record: its balance sheet account, the account currency is local currency, sort key 001 and field status group G001. And that's all.
Can somebody explaine this?

Guys. In addition to above my problem. I was facing this problem due to some graphics issue on my laptop. I was not able to see most of the fields because of Graphics Driver installed on my laptop. ( Later on I got this solution. ).
This seems very unrealistic to hear but my experience is true.
I hope in future if some one will have this issue please check out driver compatibility specially Graphics. This problem may suppose to encounter with Dell.
Anyways Z layout also worked fine as suggested by Guest FICO.
Thank you all.
Regards,
Sharvari Joshi.

Line item based approval

Hi All,
I have line item based approval workflow WS14500015. My shopping cart has multiple line items each awaiting approval from multiple approvers.
Now my requirement is when any approver approves his line items , that particular line items should not be allowed for changes even though the shopping cart has status awaiting approval coz others line items are still awaiting approval .
Is this possible i.e user should be able to make changes to unapproved line items abut not approved line items .
Can i user badi BBP_WFL_SECURE_BADI for this ?? Please if anyone has already done this please share your inputs .
Thanks in advance
Iftekhar Alam

Hi Alam,
have you checked the APPROVAL_HISTORY_TABLE and ITEM_APPROVAL_HISTORY_TABLE? Here you will receive information on already approved items and the current approval process.
Kind regards,
Thomas

Not able to display line item 20 in contract

I could not able to display line item 20 in the contract document.
line item 10 and 30is there however there is no line item 30. What could be reason and how to enable the same.
MRS

It may also possible if user forgot to enter the line item 20 and jump to line item 30 after 10 as below.
Then system will show as like this

Display Line Items - Define Line Layouts?

I cannot understand what Define Line Layouts means in SPRO.
Financial Accounting -> General Ledger Accounting -> Line Items -> Display Line Items -> Define Line Layouts
I can see that there is some Line Layout Variant (D0,D1D2...), with some Fields, but i cannot understand where this fields or Line Layout Variants are used, in what transactions i can see changes if a made some. This variant reflects line layouts when i post something (f-02, ,f-03, f-04, f-51...) or when i want to see account items or balances ???.

Hi,
You can use these line layouts in the display of line items in various transactions and you can default a particular line layout for a user master, so that by default the line items comes in that layout for that user.
Go to FB00 > Doc Display tab and there you can assign the line layout
And then when you see the doucment say in FB03, you will see the line items in that format.
Regards,
SDNer

Completion and approval workflows in line item based SC approval scenario

Hi SRM experts,
We are on SRM 7 ECS , support pack SAPKIBKV08
We are designing line item based SC approval workflow. We also have completion workflow. i.e after requester creates a shopping cart, it goes to buyer as per completion workflow( if the SC does not have price , vendor or has a free text) , and then after the completion workflow, it goes to main SC approval workflow.
My questions are :
1. If a requester creates 2 line items in SC , and 1 line item does not have price/vendor/or material , whereas 2nd line item has price/vendor/ and material , can we send onlt the 1st line item to completion workflow and not send the 2nd line item in the completion workflow but directly to SC approval workflow ? OR we have to send the entire cart to the completion workflow ?
2. After the completion and the approval workflow , if line item 1 is approved, can it create a PO , whereas the 2nd line be still in approval . i.e do all the cart items need to be approved before creating POs or as and when individual line items get approved , they can create thier own POs
Rgds
Sumendra

Hi Sumedra,
Which workflow are you using - application or process contrlled workflow?
Assuming you are using process-controlled workflow - I will answer following questions -
1. Can offline approval be used for item based shopping cart approval workflow?
- Yes, it can be used !
2. Can different line items be sent by mail to different mail boxes?
Yes
3. Will 1 manager see all the 10 line items OR only the 1 line item for which he is responsible?
1 manager can 'see' all the items but he can only approve or reject the item that he is suppose to act on. All other item will be grayed out. However, this behaviour is configuarable !
4. If he will get only line for which he is responsible , and once he clicks on approve , will this approval apply to his line item only , OR it will apply to all the 10 line items ?
- see above
Regards,
Amit

Line-item based profitability report (CO-PA)

Hi SAP community,
when I run KE24 i can select the "Mode of access"
Read acc. to current structure ==> Realignment changes are included
Read as posted ==> Realignment changes are excluded
When I create a line-item based CO-PA report (KE91), do I have the same functionality, do either include or exclude realignments?
Thanks in advance,

When I do a realignment and run a line item based report afterwards, the reports picks up the realigned value.
I havent seen any setting during the report setup where I could potentially define if the realigned or the original value should be picked.
So I assume SAP always selects the realigned values from the segment table in case of a line item based report

Offline approval for line item based Shopping carts

Hi ,
We are planning to use offline approval and line item based approval (item based approval workflow) for shopping carts.
For e.g. 10 line items in a cart can have 10 different cost centres, and a line each need to go to respective cost centre managers for approval.
have few clarifications:
1. Can offline approval be used for item based shopping cart approval workflow?
2. Can different line items be sent by mail to different mail boxes?
3. Will 1 manager see all the 10 line items OR only the 1 line item for which he is responsible?
4. If he will get only line for which he is responsible , and once he clicks on approve , will this approval apply to his line item only , OR it will apply to all the 10 line items ?
Rgds
Sumendra

Hi Sumedra,
Which workflow are you using - application or process contrlled workflow?
Assuming you are using process-controlled workflow - I will answer following questions -
1. Can offline approval be used for item based shopping cart approval workflow?
- Yes, it can be used !
2. Can different line items be sent by mail to different mail boxes?
Yes
3. Will 1 manager see all the 10 line items OR only the 1 line item for which he is responsible?
1 manager can 'see' all the items but he can only approve or reject the item that he is suppose to act on. All other item will be grayed out. However, this behaviour is configuarable !
4. If he will get only line for which he is responsible , and once he clicks on approve , will this approval apply to his line item only , OR it will apply to all the 10 line items ?
- see above
Regards,
Amit

Display line item based on GL Code in BPS.

Similar Messages

Maybe you are looking for