Distributing MAX for Customers Use

Hi,
I am developing a real-time PXI-based system using LabWindows/CVI Real-Time. Our customer will receive the rack and interface to it using UDP - they have no 'knowledge' about the software running on the PXI RT controller apart from how to control it with the UDP data they are sending. They have requested that we include some kind of maintenance mode/software which will allow us to test the outputs (using a set of known inputs) from the rack at system installation/problem finding etc but not using their UDP interface. Is it possible to distribute a copy of MAX to the customer so they can follow some set procedure to check the outputs from the system? We obviously have a development licence here to develop the system but where does this leave us in terms of distributing the NI software to the customer? Would we have to pay extra?
Thanks
Martin

Hi Martin,
I believe there is a way of distributing MAX to a customer. A fairly simple way would be to include a piece of software in the deployment that requires MAX. Or if you could give the customer a small driver that requires MAX this would mean that your customer would be able to use it.
For example, if you included an NI-VISA driver in the package that your customer recieves, they will also receive MAX. Its the same principle if your were to include, say a DAQmx driver.
As far as licensing goes. VISA is free to anyone that has already purchased a product from National Instruments. Here are some links that explain the licensing subject a bit more.
http://digital.ni.com/public.nsf/allkb/1CA88BE68A3E12EA862575370058100D?OpenDocument
http://www.ni.com/visa/license.htm
Kind Regards
Michael
NIUK Application Engineer

Similar Messages

Solution for customers using Mac OS 10.4, 10.5

Hi all,
Our help desk has received calls from customers who try to install the app and get a compatibility problem. According to the tech specs, AIR 3.0 is not compatible with Mac OS versions lower than 10.6.
What's the recommended solution for such cases, excluding an OS upgrade? If I send a customer a link to an archived AIR version, will it try to auto-update to 3.0 once the app runs?
Thanx
David

Hi,
A Full Feature software is not available for your printer for OS X Mavericks, I'm sorry to inform you that a such is only available for newer models and will not be available for your printer.
Scanning from the front panel is not supported on the operating system but only via Image Capture, Preview or Printers & Scanners as listed in the following document:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03967506&tmp_task=useCategory&cc=us&dlc=en&lc=e...
Regards,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

DOWN PAYMENT FOR CUSTOMERS

Hi
Can anyone send me a write up on the standard down payment creation, reciept and clearing the same against customer invoice in SAP?
My email id is [email protected]
Regards
Sanil Bhandari

1 - Down Payment Request for Customers Use TC: F-37
Here you create Noted Item this line item you can use wile creating Down Payment
2 - Down Payment Use TC:F-29
3 - Transfor SP Gl to Normal by Clearing of SP GL Use TC: F-39
4 - By clearing of Normal Gl : F-32
5 - Incoming Payment Use TC: F-28
These are the Process for Down Payment for Customers,
i hope you this is use ful for you,
Thanks,
TML

How to set up FSCM 9.0 Application for Customers to use ?

Folks,
Hello. I have just installed FSCM 9.0 ( all of its modules) and run the application in Browser successfully. The Database is a clean System Database without any Demo data (Production Database).
In order for Customers to type in their data into the application, we need to set up CharFiled, SpeedType, SetID, common data in Controls Tables in the Database. In Menu, there is "Setup Financial/Supply Chain", and under PeopleTools, there is "Setup Manager". But I don't understand where to start to set up the application FSCM 9.0 application.
Do any folks understand the procedure to set up FSCM 9.0 application for Customers to use step by step ?
Thanks.

Folks,
Hello. Thanks a lot for replying.
I have installed FSCM 9.0 all of 50 modules. I just want to implement General Ledger module. Thus, I create a project named "General Ledger" in Setup Manager under PeopleTools as follows:
PeopleTools -> Setup Manager -> Manage Implementation Project -> Create New Project by Product -> select "General Ledger" ->View Summary -> Save -> Type in "General Ledger" in Project Name Box -> Click ok -> click "generate setup tasks" -> click "setup task generation status"
It has been for a long time, I still see "Run Status" is always "Queued". The button "View Setup Task" does not become clear. This means the process is not completed.
Do we need to configure Process Scheduler at first before run Setup Manager ? If yes, how to configure Process Scheduler for Setup Manager to generate a list of setup tasks of a project ?
Thanks.

Releasing app for customers

Hi,
the company I work for delivers a client-server application.
For our customers we would like to create a stripped down client for the iPhone platform.
Since this application would only be usable for a small number of people, I don't think it belongs in the appstore.
However, 100 users might not be enough.
We do not have more than 500 employees.
How would we go about getting an application to our customers?
Do we need a standard or enterprise program?
Is it at all possible to provide customers with iPhone applications outside the appstore?

Ewoudvdv wrote:
Are enterprise program participants allowed to distribute to their customers?
I believe distribution is limited to employees (and likely needs to be done over a corporate intranet).
On the other hand, presumably you would incorporate some way to restrict access into the app, so possibly a free app distributed via the App Store may work even though it's clearly not going to be 'general use'; not sure that it would make it past the vetting process, but depending on the resources you'd need to develop the app, it may be a worthwhile risk (and may be a better way to get Apple's attention).
Good luck!

Electronic invoice for customers

Hello experts
I look for the function which is sent Electronic invoice for customers.
Right now we are using 4.6C and our customer use SAP also.
Our industory is consumer product and chemical product.
Our requirements are follows.
- Electronic invoices should be digitally signed from our side
- The electronic invoice has to be converted from SAP format to a standard format accepted by the customer (common standard formats are PDF, XML, etc..)
- The files have to be automatically distributed from SAP to customer platform (SAP Server to local server to customer IT system/platform),
- File distribution tool should be able to be easily managed for several customers (FTP file transfer customer by customer could be become too complicated depending on the number of customers).
Are there any solution or similar case with us?
Best regards,
Yoshihito Ichimura
GBS Chemical Sales Team (CH)
Information Systems Division, Kao Corporation

Thank you for reply.
As far as I understood following requirements can be realized based on your note.
- The electronic invoice has to be converted from SAP format to a standard format accepted by the customer (common standard formats are PDF, XML, etc..)
- The files have to be automatically distributed from SAP to customer platform (SAP Server to local server to customer IT system/platform),
- File distribution tool should be able to be easily managed for several customers (FTP file transfer customer by customer could be become too complicated depending on the number of customers).
However I would like to know whether following requirements are realized.
- Electronic invoices should be digitally signed from our side

Sorting files for distributed systems for Documaker

Hello,
I've been asked to research tools that will assist with fast sorting of files for the distributed systems for Documaker. Unfortunately, I have not had any exposure to Documaker so I'm starting from scratch. Anyone have any experience with this?
Thanks in advance,
Ron

Easy enough!
BCH files can be sorted by any number of means depending on what you would like to do and when you want to do it, and the complexity of your sorting requirements. Documaker includes some rudimentary sorting capabilities, but since there are so many other options available this is not something we have focused on as a desired feature. You can browse the system doc for more details on that. Otherwise... if you're running in multistep mode then you have access to the BCH file, in which case you can sort it using whatever is appropriate to your OS: MVS folks have syncsort, Linux folks have just about anything from perl to sort, Windows folks have a sort command as well. It so happens that those items I've mentioned are all solutions I've used for customers. If you're running single-step, then you won't likely have the BCH file available to use, and will have to write a custom rule in your CUSLIB for Documaker to sort. In this case, you would have to have access to a sorting application that provides an API. I've used Opt-Tech Sort for customers in the past, and it's definitely both affordable and powerful (and multiplatform).
NA and POL files generally do not require sorting and I would highly recommend that you steer clear of messing with those files unless you have a darn good reason to do so. Primarily you don't need to sort them because the print output is controlled by the BCH file so if you reorder the BCH, the print reflects that order. The NA file contains the variable data, and the POL file contains the forms and sections and recipients for the transactions.
Printstream sorting is an entirely different animal. I haven't been too involved with printstream sorting because it is both 3rd party and happens outside the Documaker realm, but I can tell you that most customers use facilities provided by their print controller (depending on the type of printer) or they use tools like StreamWeaver (in fact that's probably the best one IMO).
Hope this helps!
Andy
Edited by: Andy Little on May 20, 2010 12:09 PM

Please help me with my electrical engineering homework : temperature control and watering system for greenhouse using labview and arduino

temperature control and watering system for greenhouse using labview and arduino
spesification :
1. max temp : 28 celcius (when temperature is more than 28 celcius, fan ON)
2. min temp : 20 celcius (when temperature is under 20 celcius, heater ON)
3. watering system : aquaponic (grow plant and fish in separate tank but connect each other). Plant roots help filter water for fish. Fish poop for plants fertilizer. So I need a pump to distribute water.
Please help me create VI file simulation.. I'm sorry I'm not fluent in English. May God bless you all
Attachments:
YOOOSHH.vi ‏88 KB

Duplicate thread. Please keep the discussion in that thread where you already have a response. It is also the more appropriate thread for your question.
Lynn

Adobe Creative Cloud and Adobe Creative Suite: New Choices for Customers

Adobe has announced the new Cloud-based model for software distribution, along with new terms for boxed product upgrade eligibility. Beginning with the CS6 releases, when they happen, upgrade pricing on boxed products will only be availble one generation back. There is a limited window to upgrade now to the current versions at a discount.
See http://blogs.adobe.com/conversations/2011/11/adobe-creative-cloud-and-adobe-creative-suite -new-choices-for-customers.html

Eugene:
Based on the current information we have (from the blog post), which may not be correct and which you should not rely upon:
There is some confusion about the word "discount." As used in the blog post, in general there are no "discounts" for upgrades, there is the upgrade price and there is full price. But, also in the blog post, there is a special "discount upgrade" if you choose to upgrade to CS5.5 today (prior to Dec. 31, 2011), which is 20% off the regular upgrade. However, Peter used the word "discount" to distinguish between upgrade pricing and full price. It's probably a good idea to avoid using that word there because of the potential for confusion.
I have CS5 InDesign in work. So I will be able to upgrade that to CS6 when it comes out at the discount price?
You will be able to upgrade to CS6 at upgrade pricing. Not the 20% discount, but it is "discounted" from the full price of CS6.
I'm still using CS2 Illustrator and Photoshop, for the little work I do in those programs, they're fine. But if I want to upgrade them to CS6 I have to pay the full amount of an upgrade, with no discount... or will I have to pay for CS6 in full for both of these programs?
You will have to pay the full price (not the "full amount of an upgrade," whatever that means).
If you elect to upgrade to CS5.5 prior to Dec. 31 of this year, however, then then you can pay the discounted upgrade price to upgrade to CS5.5 (well, CS5 since Photoshop CS5.5 doesn't exist), and then you can pay the CS6 upgrade price in March/April. So you can pay for no upgrades (full price) or two upgrades (one of which is 20% off).
At the moment I can upgrade CS2, photoshop and Illustrator for €240 each, to CS5. So wouldn't I just be able to do that now and then buy the CS6 upgrade at a much later date perhaps just before CS7 comes out?
Yes, you can do that.
If CS6 has the tools to basically go "File>Export>Epub" and I get a fully working epub file without having to trash about in code afterwards or make complex tagging in InDesign, then I'll be buying it.
It looks like EPUB is evolving pretty fast, so even if ID CS6 fully supports what you want out of EPUB on Day 1, I bet you'll need to be prepared to postprocess it on Day 2. Or at least long before Day 200.

Regarding GL account in FICO for Customers

Hi,
I have a requirement to generate a report where i have to get the opening balance of customers month wise.I can find reconcilation account for customers ,but i have to get the individual customers opening and closing balances.Fico consultants please provide me how to find the gl account for particular customers or opening balaneces.
With Thanks,
Dinamol

you'll find all rec-accounts in skb1 with field mitkz = D
2) for openeing balance use table knc1
A.

QUERY FOR CUSTOMERS FULL DEBIT AND CREDIT WITH CLOSING BALANCE

Hi Friends,
   I need query for CUSTOMERS FULL DEBIT AND CREDIT WITH CLOSING BALANCE for selection criteria from date and to date.
   I know the Trial Balance Report will sort out this issue... but i need routeday wise report
1. Business Partner Master Data - i created one UDF field called U_Routeday (MONDAY, TUESDAY, WEDNESDAY,THURSDAY,FRIDAY)
2. The query should be like selection criteria
                              - Routeday [%0]
                              - Posting Date [%1]
                              - Posting Date [%2]
CardCode
Debit
Credit
Balance
D10503
25031.50
24711.50
2962.00
D10641
5466.00
7460.00
285.00
D10642
2866.00
142.00
give any helpful query ASAP... Thanks in advance

Hi,
Try this query:
Declare
@fromdate as datetime
Declare
@Todate as datetime
Declare
@Code as nvarchar(25)
set
@fromdate = ( select min(Ta.[RefDate]) from OJDT ta where
Ta.[RefDate] >= [%0])
set
@Todate = ( select max(Tb.[RefDate]) from OJDT tb where Tb.[RefDate]
<= [%1])
set
@code = (select max(Tc.[ShortName]) from JDT1 tC where Tc.[ShortName]
= [%2])
SELECT
[Name] as AcctName, [Jan]= sum([1]), [Feb]= sum([2]), [Mar]=
sum([3]), [Apr]= sum([4]), [May]= sum([5]), [June]= sum([6]),
[July]= sum([7]), [Aug]= sum([8]), [Sept]= sum([9]), [Oct]=
sum([10]), [Nov]= sum([11]), [Dec]= sum([12]), total = sum
(isnull([1],0)+ isnull([2],0) + isnull([3],0) + isnull([4],0) +
isnull([5],0) + isnull([6],0) + isnull([7],0) + isnull([8],0) +
isnull([9],0)+ isnull([10],0) + isnull([11],0) + isnull([12],0))
from
(SELECT
T0.[ShortName] as Name, sum(T0.[Debit]-T0.[Credit]) as T,
month(T2.[RefDate]) as month FROM JDT1 T0 INNER JOIN OACT T1 ON
T0.Account = T1.AcctCode INNER JOIN OJDT T2 ON T0.TransId =
T2.TransId WHERE T2.[RefDate] between @fromdate and @todate and
T0.[ShortName] = @code GROUP BY T0.[ShortName],T2.[RefDate] ) S
Pivot
(sum(T)
For Month IN ([1],[2],[3],[4],[5],[6],[7],[8],[9],[10],[11],[12])) P
group
by [Name],[1],[2],[3],[4],[5],[6],[7],[8],[9],[10],[11],[12]
Let me know your result.
Thanks & Regards,
Nagarajan

1099 report for Customers

Hi,
We have a requriement to report 1099 on Rebate Customers, planning to use standard SAP report S_P00_07000134 (RFIDYYWT)
Have already modified the existing process type US_1099 with output group US1 to include both Vendor and Customer payments. But, the reprot is not pulling the Customer payments yet.
Also tried to copy the old process type and created the new one just for the customers alone. This time report is providing the output for customers but "Country specific Slection" is missing in Mandatory selection.
Can anybody suggest what am I missing in the configuration or are there any OSS note for this ??
Thansk in advance
Uma

HI,
Please refer the below note.
1549310 Belgium Customer Rebate reporting
178824 Withholding tax from SD for countries other than
Regards
Madhu M
Edited by: M Madhu on Nov 30, 2011 11:31 PM

Payment History for Customers

Hi
there is a field in the customer master (KNB1-XZVER). If this indicator is selected during the customer master creation, then the payment history gets updated and we can run the report using transaction code S_ALR_87012177, which is program RFDOPR20.
i got a requirement that even the KNB1-XZVER is not checked i need to generate a similar kind of payment history report for customers.
I am analyzing which tables this program is retrieving the data from and if the data is not updated into these tables, is it possible to do it thru a custom program.
If any one has worked on this kind of requirement please suggest me the solution.
regards
rajani

Hi
thanks for the reply. As you said we can do the config from the new entries created for the customer master.
Now the user wants the payment history for the customers already created where the check box for payment history is not checked.
can you suggest me the solution for that?
regards
rajani

How do I get The ipad locked to run only one application for customers (perhaps a webapp)

how do I get The ipad locked to run only one application for customers (just one web app, or video- instructions, or just safari). What I really want is that my customers to only use one app that has all my services. It is an interactive app so I would not like them to go surfing elsewhere while they are in my store.
Is it possible to do this on the iPad ?

Try this:
LabVIEW Champion . Do more with less code and in less time .
Attachments:
checkbox - clusters_MOD.vi ‏23 KB

I have a Macbook Pro purchased brand new. I take high quality pictures for customers, these display perfect on my laptop but appear CORRUPT on a USB stick. What is causing this? I can't seem to fix this issue. PLEASE HELP!!

I have a Macbook Pro purchased brand new. I take high quality pictures for customers, these display perfect on my laptop but appear CORRUPT on a USB stick. What is causing this? I can't seem to fix this issue. PLEASE HELP!!
I really need this issue resolved it is driving me insane!!! How can the images appear perfectly fine on my laptop then when transferring over to a USB stick they just corrupt!?

Check out this site:
http://osxdaily.com/2012/04/22/format-drive-mac-pc-compatible/
That will show you how to format a USB stick for use on both PC and Mac.
If the problem continues take it to an Apple store and have them check it out.
>Also what s exFAT?<
From:
http://en.wikipedia.org/wiki/ExFAT
"exFAT (Extended File Allocation Table) is a Microsoft file system optimized for flash drives.[3] It is proprietary and patented."
That first site explains it at length.

Distributing MAX for Customers Use

Similar Messages

Maybe you are looking for