Distribution Status Failure

When I open the SCCM 2012 R2 Admin Console and browse to
Monitoring | Overview | Distribution Status | Distribution Configuration Status
, all the DPs are banged.  The MP is fine.
When I look at the associated asset messages, each of them says...
Upon review of that DP's smsdpmon.log file, the only thing I see wrong is...
I log onto the MP server and launch Powershell.  I then run the following query.
Get-WmiObject -ComputerName SRVCRPNAME -Namespace root\sccmdp -Query "select * from SMS_PackagesInContLib" | select PackageID
Sure enough, TEI007C is in WMI but when I look in the DP’s SCCMContentLib\PkgLib folder, the matching INI file is nowhere to be found.
I can’t find TEI0007C anywhere in SCCM so there’s no way I can redistribute that package to resolve this issue.  It looks to me like it’s just stuck in WMI but isn’t supposed to be.
Any ideas on what I should do next?
BTW, we’ve performed the following upgrades about a month ago.  I’m only now becoming aware of this problem as I just found this view in SCCM Console.  I might have been this way for a while I wouldn’t have known it because I'm very new to System
Center as a whole.
SCCM 2012 SP1 upgraded to R2
MDT upgraded to MDT 2013
AEK upgraded to 8.1
Thank you for any assistance you can offer.
Geoff Crookshanks

Have a look Pls
http://blogs.technet.com/b/configmgrteam/archive/2012/05/07/troubleshooting-content-mismatch-warnings-on-a-distribution-point-in-system-center-2012-configuration-manager.aspx
http://scug.be/sccm/2013/12/12/system-center-2012-configuration-manager-troubleshooting-and-resolving-content-mismatch-warnings-on-a-distribution-point-with-powershell/
Thanks, Prabha G

Similar Messages

  • Error message in distribution status of crmd_order

    Hi All,
    We are working on CRM 2007. After saving the transaction type in cRMD_ORDER the distribution status attribute in the status view is showing as "Error in distribution".
    But still we can find the document being available in ECC.
    Please help us in this issue.
    Points will be rewarded liberally.
    Thanks in advadnce,
    RK

    Have you applied Support Package 2? We had a similar error that was caused by a program error that got fixed with SP2.
    We got the error in SAP Note 1128686 which is due to a program error that has a correction in the note and also included in the cumulative Support Package 2 (SAPKU60002).
    After applying the SP, sales orders created in IC Web now are in status Distributed Open.

  • Status Failure -lo exception:network adapter could not establish connection

    Hi, installed SQL DEVELOPER today and its driving me mad... I am getting this error
    Status Failure -lo exception:network adapter could not establish connection.
    Basic tab I have all the right information, tried test gives same error...
    hostname ajas
    port 1521
    sid altaf
    TNS
    Network alias altaf
    connect identifier altaf(TRIED SINCE NETW ALIAS DIDNT WORK)
    went to TNS tab and from the list selected the right entry for NETWORK ALIAS,tried test still same error... tested with connect identifier still same error...went to Advanced entered this string jdbc:oracle:thin:@ajas:1521:altaf ..... still same error...what the hell is wrong...here is the tnsnames.ora entry ...
    ALTAF =
    (DESCRIPTION =
    (ADDRESS_LIST =
    (ADDRESS = (PROTOCOL = TCP)(HOST = AJAS)(PORT = 1521))
    (CONNECT_DATA =
    (SERVER = DEDICATED)
    (SERVICE_NAME = altaf)
    by the way I am able to connect with sql*plus ... lsnrctl gives the lsnr so thats running... tnslsnr is also running...also installed the latest java sdk i.e 1.5... i have set new path to point to this new java.exe i.e 1.5 one... this is really crazy and havent see such probs in any tools i have ever used and that too using it in normal pc ... God knows what will happen if used for remote db's....
    here is listener.ora
    LISTENER =
    (DESCRIPTION_LIST =
    (DESCRIPTION =
    (ADDRESS_LIST =
    (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC0))
    (ADDRESS_LIST =
    (ADDRESS = (PROTOCOL = TCP)(HOST = AJAS)(PORT = 1521))
    SID_LIST_LISTENER =
    (SID_LIST =
    (SID_DESC =
    (SID_NAME = PLSExtProc)
    (ORACLE_HOME = C:\oracle\ora92)
    (PROGRAM = extproc)
    (SID_DESC =
    (GLOBAL_DBNAME = altaf)
    (ORACLE_HOME = C:\oracle\ora92)
    (SID_NAME = altaf)
    no one seems to have answer for this... there are all kinds of strange replies for this problem.... anyone has solved this prob plz reply....
    Message was edited by:
    ajashadi

    I've had the same problem when I installed the latest version of SQL developer (1.2.1.32.13) on a machine that still had an older, working version. My problem went away when I changed from an IP name to an IP address. on the connection setup window.

  • Document distribution Status

    Hi All,
    I am new in SAP and I am for the moment trying to learn about document distribution in DMS.
    I wonder what I should do to get the Status for my distribution order to OK?
    For the moment the Status alway stays at PC, depending how I distribute the Status has been AS nad BD before staying at PC.
    In my example I have distributed via Recipient List and succesfully received the document with its originals to an email.
    I have tried both confirm receipt/ no confirmation and also changed other things.
    Thanks in advance
    Mikael

    Hello,
    Good day!
    I was wondering if you could help me with my problem regarding document distribution status. I would like to add a new external address in the recipient list. I was able to maintain the address in SOAD and SOCP however the status stays at BD for the new external address that I maintained. For the rest of the recipients, it was processed successfully (email was sent and a form was printed).
    Can you tell why is it not working or give your inputs on what to check?
    Thanks and kind regards,
    Ivy

  • SQL Developer Connection Error: Status : Failure -Test failed: IO Error: The Network Adapter could not establish the connection

    Hi, I'm running the following setup:
    Mac OS X 10.8.4
    Virtual Box 4.2.16 r86992
    Oracle Developer Days (don't know the version, just downloaded it)
    SQL Developer 3.2.20.09
    Networking is host-only, I tried bridged but that doesn't make a difference for the problem at hand. I can ping my virtual box just fine, telnet to port 1521 looks good too:
    $ ping 192.168.56.101
    PING 192.168.56.101 (192.168.56.101): 56 data bytes
    64 bytes from 192.168.56.101: icmp_seq=0 ttl=64 time=0.449 ms
    ^C
    --- 192.168.56.101 ping statistics ---
    1 packets transmitted, 1 packets received, 0.0% packet loss
    round-trip min/avg/max/stddev = 0.449/0.449/0.449/0.000 ms
    $ telnet 192.168.56.101 1521
    Trying 192.168.56.101...
    Connected to 192.168.56.101.
    Escape character is '^]'.
    asdf
    asdf
    Connection closed by foreign host.
    When I create a new connection with sql developer, with the same hostname / IP (192.168.56.101), Port 1521 (didn't change that) and SID orcl, basic connection type, it can't even connect, throwing the error mentioned in the subject:
    Status : Failure -Test failed: IO Error: The Network Adapter could not establish the connection
    I have looked at various threads in the forums here but I'm still stymied why the connection seems to be ok, yet sql developer has problems with it. If I create an ssh tunnel so sql developer only has to connect to localhost it works:
    ssh -L 1521:192.168.56.101:1521 -l oracle 192.168.56.101
    Message was edited by: 2a2e67cd-b5b2-4229-9fa6-21f5dfe0760d

    Hi Ali,
    This may be of varoius reasons..
    Is the database that you are connecting on the same PC?
    You have specified Hostname: localhost.
    If not please replace it with the IP of that server.
    Else please check whether the database listener is started or not. if not please start the listener.
    Check the SID by tnsping command.
    Hope this will help you..
    Thanks
    Ashok

  • PeopleSoft Reports Distribution status is 'Posting'

    In our Peoplesoft application, all the jobs are holding with distribution status as 'Posting'. All the instances are qued up in ps_cdm_transfer table. Once the Process Scheduler server is rebooted, all of them gets posted but again it is holded with posting status. It requires to restart the process scheduler server again and again to get them posted. The instance was working fine till now and none of the logs tells anything about this. Also one point needs to be mentioned here that we are not able to see the message log for the jobs which are holding in 'Posting' status and even though the transfer retries are set, it is not doing the transfer at all. Any help is really appreciated as this is a bit urgent from our end.

    - is there sufficient space on the report Repository?
    - How many DST Agents are there. is spawning enabld?
    - and then check the count(*) from PSPRCSRQST, PSPRCSQUE & PS_CDM_LIST. They should be in Sync.
    Finally check the oldest one that is in 'POSTING' and see how big is its o/p file size. Go to log_output on the Prcs Server. If it is too huge verify wiht users and delete that report and then bounce/reconfigure the Prcs Srv. Mostly this shud resolve the issue.
    and it would be good if u post the info from the Dst & Scheduler logs from Prcs Scheduler.
    -vKing.!

  • Status : Failure -I/O Error: DB server closed connection.

    I am trying to use SQL Developer to migrate several SQL server database's into Oracle.  Some of them are hosted in a SQL Server 2000 instance and the rest are on SQL Server 2005.  I am able to connect to the SQL Server 2000 databases without issue, but not the 2005 databases.  I have followed every step in several different forum posts all to no avail.  Why is SQL Developer fine with the 2000 instances, but flatly refuses to connect to the 2005's?  I have zero problems connecting to the databases using TOAD or Management studio.
    1. I am having this same issue with SQL Developer versions 2.11, 3.1.0.7  and also 4.0.3.16
    2. TC/IP is enabled
    2. I am using the 1.2 jar file
    3. I have put the SSO folder in my PATH
    4. I have copied the ntlmauth.dll file to every bin directory I can find
    5. I've also copied the JtdsXA.dll to every bin directory I can find.
    6. I know exactly what my port numbers are, and they are NOT 1433.
    7. I have tried every combination of connection name, and port with and without database and instance name added. 
    8. I have a valid account and password set up using SQL Server authentication, and I also have a valid account using windows authentication that have both been verified by using TOAD and Management Studio.
    9. I am also receiving the following error trying to use windows authentication through SQL Developer and have followed all instructions I could find to fix it to no avail:  Status : Failure -I/O Error: SSO Failed: Native SSPI library not loaded. Check the java.library.path system property.

    Did you check the Help?
    Before You Start Migrating: General Information
    You may need to perform certain tasks before you start migrating a third-party database to an Oracle database. See the following for more information:
    See also any information specific to the source database that you will be migrating, as explained in Before You Start Migrating: Source-Specific Information.
    Note: SQL Developer does not migrate grant information from the source database. The Oracle DBA must adjust (as appropriate) user, login, and grant specifications after the migration.
    Note: Oracle recommends that you make a complete backup of the source database before starting the migration. For more information about backing up the source database, see the documentation for that type of database.
    If possible, begin the migration using a development or test environment, not a production database.
    Creating a Database User for the Migration Repository
    SQL Developer requires a migration repository to migrate a third-party database to an Oracle database. To use an Oracle database for the migration repository, you must have access to that database using a database user account. Oracle recommends that you use a specific user account for migrations, For example, you may want to create a user named MIGRATIONS, create a database connection to that user, and use that connection for the migration repository; and if you wish, you can later delete the MIGRATIONS user to remove all traces of the migration from the database.
    When you create a user for migrations, specify the tablespace information as in the following example, instead of using the defaults for tablespaces:
    CREATE USER migrations IDENTIFIED BY <password>
      DEFAULT TABLESPACE users TEMPORARY TABLESPACE temp,
    Do not use a standard account (for example, SYSTEM) for migration.
    When SQL Developer creates a migration repository, it creates many schema objects that are intended only for its own use. For example, it creates tables, views, indexes, packages, and triggers, many with names starting with MD_ and MIGR. You should not directly modify these objects or any data stored in them.
    Requirements for Creating the Destination Oracle Objects
    The user associated with the Oracle database connection used to perform the migration (that is, to run the script containing the generated DDL statements) must have the following roles and privileges:
    Note: You must grant these privileges directly to a user account. Granting the privileges to a role, which is subsequently granted to a user account, does not suffice. You cannot migrate a database as the user SYS.
    Roles
    CONNECT WITH ADMIN OPTION
    RESOURCE WITH ADMIN OPTION
    Privileges
    ALTER ANY ROLE
    ALTER ANY SEQUENCE
    ALTER ANY TABLE
    ALTER TABLESPACE
    ALTER ANY TRIGGER
    COMMENT ANY TABLE
    CREATE ANY SEQUENCE
    CREATE ANY TABLE
    CREATE ANY TRIGGER
    CREATE VIEW WITH ADMIN OPTION
    CREATE MATERIALIZED VIEW WITH ADMIN OPTION
    CREATE PUBLIC SYNONYM WITH ADMIN OPTION
    CREATE ROLE
    CREATE USER
    DROP ANY SEQUENCE
    DROP ANY TABLE
    DROP ANY TRIGGER
    DROP USER
    DROP ANY ROLE
    GRANT ANY ROLE
    INSERT ANY TABLE
    SELECT ANY TABLE
    UPDATE ANY TABLE
    For example, you can create a user called migrations with the minimum required privileges required to migrate a database by using the following commands:
    CREATE USER migrations IDENTIFIED BY password
      DEFAULT TABLESPACE users TEMPORARY TABLESPACE temp;
    GRANT CONNECT, RESOURCE, CREATE VIEW, CREATE MATERIALIZED VIEW,
       CREATE PUBLIC SYNONYM TO migrations WITH ADMIN OPTION;
    GRANT  ALTER ANY ROLE, ALTER ANY SEQUENCE, ALTER ANY TABLE, ALTER TABLESPACE,
    ALTER ANY TRIGGER, COMMENT ANY TABLE, CREATE ANY SEQUENCE, CREATE ANY TABLE,
    CREATE ANY TRIGGER, CREATE ROLE, CREATE TABLESPACE, CREATE USER, DROP ANY
    SEQUENCE, DROP ANY TABLE, DROP ANY TRIGGER, DROP TABLESPACE, DROP USER, DROP ANY
    ROLE, GRANT ANY ROLE, INSERT ANY TABLE, SELECT ANY TABLE, UPDATE ANY TABLE TO
    migrations;
    After you have created the converted model and done first DDL generation done for the new database, it will be clear from the scripts which privileges will be required for your situation.

  • Synchronize Material Status and Distribution Status

    As we have assigned (in our concept) one distribution status to one material status, we want to ease the maintenance for the users so that they only have to set the material status. The distribution status should then be adapted automatically (for both cross-plant and plant-specific status).
    My idea was to create a report which maybe runs nightly and sets the distribution status according to the material status.
    Has anyone made experience with that and give me some hints on how to do that well?
    Thanks for your contribution!

    Hi Mohan,
    I am talking about the material master. You can set both status there. What I want to have is that
    -x-plant material status is always equal to x-plant distribution status
    --> MARA-MSTAE is always written to MARA-MSTAV
    -plant-specific material status is always equal to plant-specific distribution status
    --> MARC-MMSTA is always written to MVKE-VMSTA
    Best regards
    Martin

  • Distribution Status : A  Error in Distribution.

    Hi All
    I created Standard Order in CRM with 10 line items. It is replicated in R/3 with below error.
    Header error : Item 000000 does not exist
    Item level Distribution Status : A Error in Distribution. (At all the items)
    I checked in SMW01, SMQ1 & SMQ2. Everthing is Green.
    I dont know how to find out exact issue.
    Please reply
    Regards
    Jayesh

    Hi Jayesh,
          Can you please state weather Item 0000 has been entered in the sales order in CRM or not and what is the status of the Order in CRM is it error free in CRM??
    Also Please check for the Imcompletion Log in ECC system
    Hope it shall provide you with the details of the error atleaset
    Also you may check for the List of Recievers and Error Segments in BDoc for further help
    Also check for the Item level numbering in Transaction Type used
    Also please check for Error in the header level and also see for further details and technical help option in the error message
    To get actual reason for the error
    Hope it helps
    Thanks and Regards,
    RK

  • FM to check Distribution Status

    Hi Forum!
    I want to check in CRM the distribution status of the orders. Does anybody know a FM to get it¿?
    Regards and thanks in advance,
    Mon.

    You can use the function module  BDC_PROTOCOL_SELECT
    for this pass the session group name you get the details.it will retun the status also.

  • Any idea of the cost to replace a disk? - the message in Disk Utility tells me there's a S.M.A.R.T status failure.

    I have S.M.A.R.T status failure...  My iMac's slow and noisy, but only 3 years old.  Any thoughts about the cost to replace the disk?

    Costs will vary by location and what part of the planet you are located on, take the machine into your local Apple Store or AASP for estimates.

  • Please help me :status : failure -java.lang.NullPointerExeption

    <p>
    yesterday i can connect to db with oracle sql developer,
    but today i can not connect to my db,
    it send follwing error:
    status : failure -java.lang.NullPointerExeption
    Thanks
    </p>
    Edited by: user10552477 on Nov 7, 2008 1:25 AM

    Well what have you changed then?
    Do you remember the original settings?
    Why did your friend tell you to change something?
    Were you facing any problem when your friend helped you with these non-working settings?
    Dear Satish Kandi
    I do'nt now change.
    I have a connection that i connect to my db .
    My freind tell me that maybe miss the java.exe
    i solve my path but dont solve my problem .
    i install oracle 11g in new pc , but it send same error .

  • Run status is still "processing" but the distribution status is "posted"

    Hi all,
    We have run a process yesterday.
    The process' run status is still "processing" but the distribution status is changed to "posted". what could be the reason for this? i have never seen such thing in process monitor.
    Please help me.
    Thank you,
    Bye.

    And does the report posted and accessible from the monitor ?
    Peopletools version ? OS ? Database ?
    Did you try to refresh the page (not through the refresh button but with your web browser) ?
    Did you try to disconnect and reconnect ?
    Nicolas.

  • Shipment distribution status

    Hi gurus,
    I've a problem with shipment distribution status (VTTK-VLSTK).
    I need to distribute delivery and shipment to another system.
    For delivery I've setted LIKP-VLSTK (I've not activated distribution customizing I've only setted the flag LIKP-VLSTK); if I run VL02N SAP give me a message and link VL03N because of the flag LIKP-VLSTK is setted (even if no customizing is activated).
    If I do the same in VTTK and I run VT02N the systme give me the possibility to modify the shipment (header data or delivery linked to the shipment).
    I've checked but I didn't find SAP notes on the field VTTK-VLSTK.
    Could you please help me?
    Thank a lot
    bye
    Luisa

    Hello Luisa,
    LIKP-VLSTK operates as you have explained in the IDW scenario whereby the delivery cannot be changed once distributed (set to B).
    However, VTTK-VLSTK does not operate in the same fashion as it's not designed into the IDW scenario.
    Unfortunately I dont have a more positive answer.
    Regards
    Martin

  • Deployment Packages Distribution Status

     Hi!
    I have a package that was distributed to 7 sites.
    4 was "Content was successfully refreshed"
    3 was "Content was distributed to distribution point" 
    One site that has problem on that package is one of that 3 that has status "Content was distributed to distribution point".
    Why they are different, once I have distributed to all sites at same time?
    How can i enforce the status to change to "successfully refreshed"?
    Thanks in advance. 
    Fabio Martins MCDST/MCSA Brasil!!!

    What problem are you talking about?
    Don't worry about the states. I have no console next to me right now, but I think the difference is that content validation ran on 3 DPs. You can also kick off content validation for that package manually. That should update the status too.
    Torsten Meringer | http://www.mssccmfaq.de

Maybe you are looking for