DIY installs on intel imacs?

I ran across this page:
iMac G5 DIY (Do-It-Yourself) Instructions
which shows some stuff you can do to an iMac without voiding the warranty. Does this also apply to intel imacs?
24" iMac 2.33GHz Mac OS X (10.4.7) 15" PowerBook G4, 20" iMac 2.0GHz

Hello,
Absolutely not.
Apple canceled that service option, and has moved-on to requiring you to bring your computer in for servicing if you want to do anything other than upgrade the memory on the Intel Macs.
The previous program was a support nightmare for Apple. Constant issues with people not performing the repairs properly, and parts going back and forth and huge delays in receiving parts because there were tons of them going out and coming back and few to offer to new people with problems.
So, it just didn't work very well.
If you don't want to void the warranty on your Intel Mac, don't do anything other than upgrade the memory.
The design is completely different. So, even if you try, you'll find yourself working with a huge mess of parts inside the computer. It's not designed for easy servicing anymore.
I hope this helps.
Let us know if you have other questions.
P.S., if you'd like, go ahead and click the "Helpful" or "Solved" buttons on any of the posts / replies above if you feel they were helpful or adequately answered your question.

Similar Messages

I'm having trouble instaling a printer driver for my Canon MG5220. I downloaded the latest printer driver from the Canon website (10.67.1.0) and installed it on my Intel iMac. It said the installation was sucessful, but when I try to add a printer, no go.

I'm having trouble instaling a printer driver for my Canon MG5220. I downloaded the latest printer driver from the Canon website (10.67.1.0) and installed it on my Intel iMac. It said the installation was sucessful, but when I try to add a printer, no go. The printer does'nt show up. I'm fairly new to the Mac, after switching from windows. I'm running Snow Leopard 10.6.8.

Hold down the option key and select
 ▹ System Information...
from the menu bar. In the window that opens, select
Hardware ▹ USB
from the list on the left. On the right you should now see a list of all connected USB devices, as well as some built-in components. Is the device shown?

My Intel iMac only shows a blinking folder with a question mark when powering it up. What can I do besides running the hardware test of the original installer disc.

My Intel iMac only shows a blinking folder with a question mark when powered up.
I did run the hardware test of the original installer disc and no trouble was found and I am out of options. Does anybody have any advice what to do next

If the drive shows errors then repair, if after the 3rd pass of Repair Disk in Disk Utility it still shows errors it's telling you it's time to be replaced. Take it to your local Apple Store or AASP for repair, when it comes back use your backup (either Time Machine or bootable clone) to restore so you can pick up where you left off.

Help with re-starting my intel imac after 10.4.6 installation?

Hey guys,
I am a UK intel imac user and I have a problem. I upgraded to 10.4.6 via software update this morning and everything seemed to be loading OK. On returning to the computer 5 minutes later I discovered an error message saying that update had failed. I then looked at the version tab under 'About this Mac' and it said 10.4.6. I then thought the best thing to do was simply re-boot. I now have a DOS screen with the following:
Darwin/BSD (JOnathan-Baileys-Computer--2.loc) (Console)
Login:
I have tried simply re-booting again as well as typing in my user ID and password to no avail? On typing in my user ID etc I get a blue start up screen and then I get the DOS screen again.
Any suggestions?
Incidently I forgot to remove my Audio Interface from the Firewire connection is this what probably caused the machine to throw a major tantrum?
Any help would be appreciated
Jon Bailey (UK)

Hi boxlight,
No, you are not the first to mention the issues you are now experiencing with the 10.4.8 update...
Here's what I would try: http://www.apple.com/support/downloads/macosx1048comboupdateintel.html - you can run the Combo Update and see if that "fixes" any issues. There have been posts re: using the Combo Update which ended up fixing some software glitches...
You can also go here: http://www.thexlab.com/faqs/maintscripts.html#Anchor-Manually-49575 - I use the Terminal method to run the Maintenance Scripts and my Mac runs better than new...
Good luck, Rick
iMac G5 iSight 20" - 30G iPOD in Slimming Black - Mac OS X (10.4.7) - HP Pav 15" WS and Toshiba Sat 17" WS LP's - Canon 20D & A620

Intel iMac's HD not recognized by Leopard Installer

I am trying to install Leopard on an Intel iMac dual core 1.8 MHz, 2 GB RAM. It seems to be running Tiger 10.4.11 just fine. I have successfully updated both a MacPro and MacBook Pro with the same DVD disc. When I start the install process, I get as far as the screen to select my iMac's internal HD and it never appears. If open Leopard's Disk Utility, it sees the HD icon, but not the volume. When I reboot from the Tiger install, the Disk Utility sees it verifies the HD and all permissions are fine.
There's plenty of space left on the HD (90+ GB) out of 240 GB. I am stumped. Suggestions welcome.

Hi! See if THIS helps. Tom

Intel iMac stuck at desktop screen, no menu bar, no finder, spinning ball

Hi, I've just run into a serious problem with my 24" Intel iMac not starting up properly. At first it was getting stuck on the gray screen, then I got it to the blue screen, and now finally I can get it as far as loading the desktop picture, the cursor comes up and is responsive to the mouse, but has now become the spinning beachball. There is no menu bar, and the finder will not load. It's been in this state for about ten minutes. What I did to get it to this state is:
1. Disconnect all peripherals. I'm using an Apple wireless keyboard and mighty mouse, too.
2. Reset the PRAM.
3. Reset the PMU.
4. Used the installation disc to run Apple Hardware Test (the short version) successfully...no problems.
5. Used the installation disc to run Disk First Aid. Corrected a minor problem with the file structure.
6. Used the installation disc to run Disk First Aid. Repaired permissions.
7. Performed a Safe Boot, and got to the log-in screen, did not log in, but restarted normally as suggested in one of the Apple support articles.
8. Am now staring at my desktop picture without the menu bar or the Finder, but the spinning beachball is chugging along and is responsive to my mouse.
If it is of any help, I've noticed for several months that the computer would occasionally fail to wake from sleep, and I'd need to force a shut down by holding the power button for several seconds. Could this have been a precursor to the current problem?
At this point, I'm not certain which version of 10.5 I have, because I can't check. But I've installed all the Apple updates that have come through, so I must be at the current version of 10.5. I can't remember exactly how much RAM I have installed, either, but it might be 3 GB. I installed a second memory module at the time of purchase, which I bought from Crucial.com.
I'm having to write this on my ancient PowerBook G4, which is still performing admirably under OS X 10.4.11. Thanks for any help or suggestions anyone can provide! : )

It appears to have been a short of some sort on my power supply...it blew a capacitor somehow, though I don't know how/when that happened. Computer is on a surge protector, and generally sleeps during day while I'm away, but no power outages or other electrical issues occurred while I was out that I'm aware of.
Anyway, I had a new power supply installed by an Apple certified technician...opted not to do it myself...and discovered that the HD is perfectly fine. No data loss. Phew! Just two weeks w/o my computer, and no way to recover backup files on Time Capsule in the meantime.
Thanks for all the help and advice!

Printing with a networked Canon iR 3220 and my Intel iMac

I am at my wits end and I hope someone can help.
I am the sole Mac user in my company. I have a brand new, shiny 24" dual processor (intel) iMac running OS 10.4.9, that is connecting wirelessly to our network. We have a mixture of IIS and Linux servers (I believe the IIS is solely for the Windows Exchange server) Ther are 30 or so printers on the network and the one I am supposed to be printing to is a Canon Image Runner 3220 (iR 3220).
I am no Mac newbie, but I can't get the thing to print correctly. I have updated the driver from Canon (v. 1.70PS) and the PPDs (v. 2.25), followed the instructions and it will not automatically select the correct PPD. When I reset the PPD manually, it spools to the printer, but then stops all my print jobs. I try to resume and it spools and stops.
I have tried adding the printer via CanonIP, LPR, Appletalk (which gets me a message that I am connected incorrectly), setting up a sacrificial altar to the printing gods...nothing seems to work. I've tried using the iR 3200 driver and that doesn't work either.
Does anyone have any suggestions? I would appreciate any help I can get at this point.
Mike

Hello Mike,
The first thing you need to do is determine if the iR C3220 is using the Canon printer board or the imagePASS-C1/C2 print server option. If you look at the back of the iR C3220, and there is a rectangular box with an Ethernet cable connecting to the copier, and what looks something like a SCSI-2 cable also connected between the white box and the copiers interface board, then you have the imagePASS controller. This device requires a different driver to the PS v1.70 and PPD v2.x you are currently using. It also requires a queue name of 'print' or 'direct' (or 'hold' if you don't want the job to print) and it must be entered in lower case.
Since it sounds like there are PC's on the network, have a look at their printer setup and see which driver they are using. You can also check their port config to see how they are connecting.
If the iR C3220 doesn't have the imagePASS print controller and the PC users have the PCL5c driver installed, then you may find that the iR C3220 doesn't have the PS option - it may be PCL5c only. The easiest way to tell is to open the printers web page (called RUI) by entering the printers IP address in your browser of choice. With the default page open, select Additional Functions and then Custom Settings (you may be prompted for a system ID & password). If you get past this the new view will show if you have PS as well as PCL. If there is no PS, then you will have to look at installing the latest version of Gutenprint and selecting Generic PCL5c as your 'ppd'.
If the PS option is installed, then the v1.70 driver should be okay, although there is a trick to adding it. In the Printer Setup Utility, after clicking Add, select More Printers and then Canon IP (PS). In the new window input the IP address and a queue name of LP. When you click Add the copier is queried by the driver to determine what model it is, meaning that once it is displayed in the printer list it should show the iR C3220. Given that this didn't happen for you (and if the imagePASS is not being used) then a likely cause can be the disabling of SNMP in the copier setup. You may have to get the IT guys to enable this (or at least explain why it is off).
If you go the other way of manually selecting LPD as the protocol (AppleTalk is not supported by the PS v1.70 driver) then you need to ensure that for the print using you select iR C3220 CanonPS for the ppd. If you see Canon iR C3220, don't use this as it is the wrong ppd for the PS driver - it is there as part of the PPD installer.
If you want to try using the PPD, then you can use AppleTalk but of course this has to be enabled in the copier, and if your the only Mac then it is likely that it is disabled. Again the RUI page can tell you this or you can print a Config page from the copier (I think you go Additional Functions > Report Settings > Network > User Data List).
Hope something above is helpful and if not, please reply back.
Paul

HP Color LaserJet Problems with intel iMac

Can anyone give me advice on the following:-
When I try to print from my wife's new intel iMac 20" to our HP Color LaserJet 2550L, it doesn't work and print center gives me the following error message ... "The process "hppostprocessing" terminated unexpectedly on signal 5" .
The printer is connected directly to the iMac via USB. It's not on a network.
I ran the HP Color LaserJet installer from the original CD that came with the printer and when that didn't work I downloaded another (latest) Color LaserJet installer (dated 2004) from the HP website. Still getting the same error message from PrintCenter.
When I look at the HP installer log, it appears that the installer tried several times without success to install plugins into the PPD folder (HD->Library->Printers->PPD).
After trying installation and checking out my PPD folder (above) there is nothing in it.
This printer has been (still) working fine with our older 20inch iMac.
Any advice or suggestions would be appreciated.

Same happened with my photosnart. Here is part of the email from HP
Thank you for contacting HP Total Care.
I understand from your email that you are not able to print to your
photosmart 1218 printer from your new imac.
I believe you are correct when you mention the glitch between the new
Intel processor in the iMac.
I have checked the Apple website and noted the pre-installed printer
drivers that ship with this operating system, do NOT include drivers for
the Photosmart 1218 printer. There are Gimp print drivers available for
the Photosmart P1000 printer. They may work, but provide only basic
printer functionality. (see the Apple document listed below).
http://docs.info.apple.com/article.html?artnum=303057#hpdrivers
I understand that our engineers are investigating the driver issue with
the Intel-based Macs, however, I cannot provide you with an expected
date of resolution. Your printer was manufactured in 2000, and the most
recent drivers are from Aug 2005. These drivers were created before the
Intel based macs were available.

Printing problems with HP laserJet 1320 and new Intel iMac

My new Intel iMac won't print to my HP 1320 from Eudora or from web browsers. The applications "quit unexpectedly". From Safari, nothing happens.
I can print PDF documents and Office documents with no problems. The Intel is connected to a router via Airport. The printer is connected to the router via Ethernet. My old G4 iMac prints fine (connected to router via Ethernet) as does my G4 laptop (connected via Airport).

A post from another threat that might help.
From Payson
Solution!!!
Just spent 90 minutes with some nice folks in level 1 and level 2 support.
Problem seems to be that I used migration utility to import the soul of my old machine into the new machine. When you do that, you bring along the old print system (PPC vs Intel).
I had upgraded to 10.4.5 after the migration and assumed that it would correct any problem like that, but it had not.
After a great deal of trial and error, the solution was to go to move disk/library/printers to the desktop and restart the system
Then use the the install disk 1 that came with the iMac and use the OPTIONAL INSTALLS package to reinstall the printer drivers.
Worked like a champ.
Suspect similar problem might happen for any of you with I/O drivers.

TS2570 i have an intel imac and im getting a grey sceen. I get the flashing question mark folder. iv changed the H.D 2x and tired to install a new os into it but no luck. The mac isnt going into safe mode or anything. help?

Intel imac 2009. Grey screen with question mark folder. Changed harddrives 3 times now. Tired 5 keyboards on all Usb ports and a hub and keyboard wont boot to startup or safemode of anything but hub gets power. disc drive wont eject or accept a disc cuz keyboard commands not being sent to computer. Help?

Keyboards must be connected directly to the USB port, not through a hub.
Reinstall OS X without erasing the drive
Do the following:
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install the Combo Updater for the version you prefer from support.apple.com/downloads/.

Intel iMac with 10.5.8 - Grey Screen of Death but worse please help!

Okay, this has happened three times now in six months, and I'm about to go out of my mind. Everytime it's a little different but basically:
My iMac becomes unresponsive, whether by a system lock up, or I wake up in the morning (like this morning) to a black screen with the white light still on, as if it were asleep. Nothing I do wakes the computer or otherwise makes it respond, so I hold the power button down for a few seconds and it shuts off.
Now, when I boot up, I get a grey screen with the Apple logo with the spinning black/grey pinwheel.
Inserting a CD does nothing. In fact, now my only install CD of Leopard is stuck in the slot-loading drive. I've tried everything I can to eject it: hold down eject on boot, left mouse button on boot, option on boot, commandoption+pr, command+v, etc. etc. etc.
I'm a software developer for OS X and have extensive hardware knowledge, so I kind of know a bit about what I'm doing.
The iMac will not boot off of a CD. It doesn't even recognize the CD. I have an external USB 2.0 hard drive with a current Time Machine backup, but I don't think those are bootable.
Anyway, in the past, to resolve this issue, I've had to take the iMac apart, put the internal hard drive into an external enclosure, and mount the drive onto my MacBook Pro. Interestingly enough, when I do this the drive mounts perfectly fine and shows all files exactly as they should be. So it's something to do with Leopard destroying it's boot record, or some other system configuration.
Even worse, I cannot simply reinstall Mac OS X from the laptop, because the installer says the hard drive needs to be formatted before an install can occur. So either way I'm losing all my data (even though as I said I have a current backup).
Well this time I haven't taken it apart yet. But the install CD is stuck in the drive. Even if I got the hard drive out, and mounted on my MacBook, my other install CD is too damaged to use, so I MUST get this CD out of the iMac.
My questions are:
What do you do when the grey screen of death occurs, and the computer won't even boot off of the CD?
What do you do to get a CD stuck in an iMac out? Especially when the iMac is in the grey screen of death mode?
What in the world is causing this to happen EVERY 3-6 MONTHS??!
Someone please help... I'm going insane.

Hi I am having the identical problem with my 24" intel iMac 2007..... Did you ever figure out what the problem was? I'm on round 3 now and with a completely blank grey screen and it won't start up from the disk 1.. I also have diskwarrior and techtool pro as well as the osx leopard and snow leopard disk... The HD is new.. Replaced by apple 3 months ago.. Don't know the cause the first time this happened about 9 months ago.. 2nd time, 6 months ago it never rebooted from the office for mac 2008 critical update... Did a clean install after backing up to TC... Took it to apple replaced HD even though it appeared ok, they checked all hardware and I ran techtool pro daily ever since. Last week software update had several updates avail. Office for mac being one of them.. I updated and have never booted since.. . I swear to never ever use another Microsoft product as long as I live if I can just fix this once more... Help me please

BOOTABLE Firewire on Intel iMac - my story, need answers...

Just got the new Intel iMac in today. Need to be able to boot from a Firewire drive. Connected FW drive, it shows up on desktop. Erased using Disk Utility (the version that came installed on the Intel iMac). Re-booted from the iMac system DVD. When it gets to the screen to choose which drive to install on, it won't allow me to install on the FW drive. When I click on the FW drive icon, I get this message:
"You cannot install Mac OS X on this volume. Mac OS X cannot start up from this volume."
I've tried different drives, and different FW cases. It states in the manual that came with the iMac that one of the uses of the Firewire ports is to allow booting the iMac from an external hard drive. So, what's the trick? Does it require a certain type of FW case, or drive, or firmware, or formatting? I'll keep testing, but if anyone knows the answer, HELP! Thanks.
BTW, I haven't done much on the iMac yet, but the speed in just launching programs is AWESOME! Apps launched and on the screen in less that one bounce in the Dock!

Tallan - I've tried Mac OS Extended, Extended (Journaled), Extended (case-sensitive), and Extended (case-sensitive, Journaled). And I've tried all those with the OS 9 driver installation on and off.
I'm going to try doing a bootable back-up using Synchronize Pro, which is what I've used for a long time on previous Macs. But there should still be a way to do a clean install from the original DVD.
Glorfindeal - what "special boot partition" are you talking about? Where is it? How do you do it?
Thanks for the feedback....

Installing an existing copy of CS3 to new Intel iMac

I want to install CS3 on my new Intel iMac (moving from my almost defunct PPC G5 tower) which will run Snow Leopard.
I understand using the migrate feature may not be a good idea.
Problem is, I have the CS3 upgrade disc. I do have my original CS full version.
Will the CS version install on an Intel Mac? I was planning on installing CS
and then upgrading with my CS3 disk. Will this work? If not please suggest another method.
I have PS7 and CS full install disks and CS2 and CS3 update disks.
Thanks

You should only need the serial number from the version you upgraded from. If you went from CS to CS3 then have the CS serial and disk handy.
I don't remember if the installer wants you to pop the CS disk in for verification or not.
Bob

Need Urgent Help Cannot install Mac OSX 10.6 on 20" intel imac

I recently purchased an intel imac an intel mac pro from an auction. When i purchased the macs i was told that no operating systems will installed and i would need to purchase and install mac osx10.
I purchased the mac osx10.4.6 family pack from the apple store online.
i put the new disc in the mac and restarted holding down c.
for some reason nothing happens and i get folder with a question mark.
I have tried this several times but nothing seems to work.
I am a complete novice with macs and migrsting from pc.
thanks

You cannot buy a retail version of Tiger that will install on any Intel Macs. You must have the original installer discs that came with the computer. You should not have purchased the computers without them nor should they have been sold to you without them.
The only option you have is to call AppleCare or go to a local Apple store and see if you can purchase the discs needed for each computer (there are different versions for each model.)
Why reward points?(Quoted from Discussions Terms of Use.)
The reward system helps to increase community participation. When a community member gives you (or another member) a reward for providing helpful advice or a solution to their question, your accumulated points will increase your status level within the community.
Members may reward you with 5 points if they deem that your reply is helpful and 10 points if you post a solution to their issue. Likewise, when you mark a reply as Helpful or Solved in your own created topic, you will be awarding the respondent with the same point values.

Pre-intel iMac installing Snow Leopard?

Have been told by Apple that the Serial Number for my pre-Intel iMac enables me to install Snow Leopard (currently running 10.4.11). Is this straightforward or should everything be backed up before the installation? I had previously been led to believe that it wasn't possible to instal SL on this Mac. Confused and needing some clarity. Thanks.

Snow Leopard requires an Intel Processor. Here are the specs:
General requirements
Mac computer with an Intel processor
1GB of memory
5GB of available disk space
DVD drive for installation
Some features require a compatible Internet service provider; fees may apply.
Some features require Apple’s MobileMe service; fees and terms apply.
Either they were wrong or your system does have an intel processor. You should be able to determine that with "about this Mac".
Regards,
Captfred

DIY installs on intel imacs?

Similar Messages

Maybe you are looking for