Do we need to set up Name Server?

Hi all,
I am creating a Software Component in the SLD. During one of the steps, it request us to setup the Name Server. May I know what is the use for this name server? Can we do without the Name Server? And if we cannot, how do we configure the Name Server? And how do we know what type of name server to create?
Thanks in advance.
Regards

Hi,
You can leave it. It is used declaring it as the name server for the development infrastructure. In this case, the role of the server must be name server. The name server checks the <b>uniqueness of names and enables you to define name prefixes</b>. The name server is a role of a SLD. The other role is the landscape server role. The setup of the name server takes place in the same way as the setup of the SLD server.
So when you create your project in NWDS using NWDI track then the name will come as the prefix of the project. If you want to use name server you need to registerit. For more information see the note SAP Note 710315. Here is a link I think it will clear you enough.
http://help.sap.com/saphelp_nw2004s/helpdata/en/43/e9905fe1582d53e10000000a422035/content.htm
Thanks
Chandan

Similar Messages

Problem in setting up Names Server

I have done all the things for setting up Names Server using wizard of Net Assistant. I am using Oracle9i. My service of Names Server is not starting. It gives error which something about blocking.
I am not using region database and its first Name Server in my network.
The error messages are TNS-00506, TNS-12536
Please help.

You have to start the services in the Server and Clients of the following way :
Server
namesctl
namesctl> START
Client
namesctl
namesctl> START_CLIENT_CACHE
Joel P�rez

Need help setting up LDAP server for Address Book

I've set up Panther servers before for AFP which is pretty simple but now the office I work at wants me to setup an LDAP server so they can share the same contact information, probably about 2,000+ entries. I'm guessing that this will have to be entered in the LDAP server entry by entry.
I need to know how to setup the server and what settings need to be on the clients' computers, such as in Address Book.
The server is an older G4 tower and I've got 8 computers hooked up to it on a simple network. I don't think I'll need to make the LDAP server accessible from outside the network but it's something I'll have to worry about for the future.
Thanks for any help you can offer.

bump

Need help setting up web server with WRT54GS

Hello,
I am trying to set up a web server with my linksys router. For the network settings, I have used 192.168.001.150 as my primary IP (192.168.1.150, all 3 numerical characters have to be filled in), 255.255.255.000 as my primary netmask and 192.168.001.001 (192.168.1.1) as my gateway. I have gone into my router and then enabled port fowarding for port 80 to 192.168.1.150 but I still cannot access my web server. What could be the problem?
Any help would be greatly appreciated. I'm trying to set up this server so I can test scripts and things.

bump

Need to set module name same as username in V$sqlarea

Hi Gurus,
I tried to set module name same as schema name in v$sqlarea, generally it was sql*plus. For that i created one after database logon trigger, but it didn't work for all users, it is only working for SYS schema only.
CREATE OR REPLACE TRIGGER LOGIN_USERS_TRIG_NEW
AFTER LOGON ON DATABASE
declare
v_dbuser varchar2(32) ;
begin
select sys_context('USERENV','SESSION_USER') into v_dbuser from dual;
dbms_application_info.set_module(v_dbuser);
end;
result will verify from
select module , parsing_schema_name from v$sqlarea;
so if i am logging with scott user then in v$sqlarea table module name should be scott only. so whatever queries was executed from scott all queries module name should scott only.
Like that for all users. Please suggest is there any other option.
If i execute the same plsql code in scott session , it is working, but when i set with logon trigger it didn't set.
see if i execute:
SQL> exec DBMS_APPLICATION_INFO.set_module(USER, 'Initialized');
PL/SQL procedure successfully completed.
SQL> SELECT sys_context('USERENV', 'MODULE') FROM DUAL;
SYS_CONTEXT('USERENV','MODULE')
SCOTT
but the same with trigger it didn't set. Any idea.
Thanks in advance,

hi i take a trace of the session. in that trace statement is showing.
-bash-3.00$ cat orcl_ora_4407.trc
Trace file /u01/app/oracle/diag/rdbms/orcl/orcl/trace/orcl_ora_4407.trc
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
ORACLE_HOME = /u01/app/oracle/product/11.2.0/dbhome_1
System name: Linux
Node name: localhost.localdomain
Release: 2.6.9-42.0.0.0.1.ELsmp
Version: #1 SMP Sun Oct 15 14:02:40 PDT 2006
Machine: i686
Instance name: orcl
Redo thread mounted by this instance: 1
Oracle process number: 20
Unix process pid: 4407, image: [email protected] (TNS V1-V3)
*** 2011-10-04 23:07:35.726
*** SESSION ID:(43.19) 2011-10-04 23:07:35.726
*** CLIENT ID:() 2011-10-04 23:07:35.726
*** SERVICE NAME:(SYS$USERS) 2011-10-04 23:07:35.726
*** MODULE NAME:(SYS) 2011-10-04 23:07:35.726
*** ACTION NAME:() 2011-10-04 23:07:35.726
CLOSE #1:c=0,e=93,dep=1,type=1,tim=1317749855723627
=====================
PARSING IN CURSOR #2 len=47 dep=1 uid=0 oct=3 lid=0 tim=1317749855729023 hv=2145557917 ad='47aca488' sqlid='049t4sdzy57cx'
select dummy from dual where USER = 'SCOTT'
END OF STMT
PARSE #2:c=1000,e=969,p=0,cr=0,cu=0,mis=0,r=0,dep=1,og=4,plh=3752461848,tim=1317749855729018
EXEC #2:c=1000,e=1434,p=0,cr=0,cu=0,mis=0,r=0,dep=1,og=4,plh=3752461848,tim=1317749855732048
FETCH #2:c=0,e=15,p=0,cr=0,cu=0,mis=0,r=0,dep=1,og=4,plh=3752461848,tim=1317749855732153
STAT #2 id=1 cnt=0 pid=0 pos=1 obj=0 op='FILTER (cr=0 pr=0 pw=0 time=0 us)'
STAT #2 id=2 cnt=0 pid=1 pos=1 obj=116 op='TABLE ACCESS FULL DUAL (cr=0 pr=0 pw=0 time=0 us cost=2 size=2 card=1)'
CLOSE #2:c=0,e=11,dep=1,type=1,tim=1317749855734625
=====================
PARSING IN CURSOR #1 len=47 dep=1 uid=84 oct=3 lid=84 tim=1317749855737092 hv=2145557917 ad='47aca488' sqlid='049t4sdzy57cx'
select dummy from dual where USER = 'SCOTT'
END OF STMT
PARSE #1:c=1999,e=1933,p=0,cr=0,cu=0,mis=0,r=0,dep=1,og=1,plh=3752461848,tim=1317749855737087
EXEC #1:c=0,e=51,p=0,cr=0,cu=0,mis=0,r=0,dep=1,og=1,plh=3752461848,tim=1317749855737654
FETCH #1:c=0,e=14,p=0,cr=0,cu=0,mis=0,r=0,dep=1,og=1,plh=3752461848,tim=1317749855738075
STAT #1 id=1 cnt=0 pid=0 pos=1 obj=0 op='FILTER (cr=0 pr=0 pw=0 time=0 us)'
STAT #1 id=2 cnt=0 pid=1 pos=1 obj=116 op='TABLE ACCESS FULL DUAL (cr=0 pr=0 pw=0 time=0 us cost=2 size=2 card=1)'
CLOSE #1:c=0,e=7,dep=1,type=1,tim=1317749855738544
XCTEND rlbk=0, rd_only=1, tim=1317749855744024
XCTEND rlbk=0, rd_only=1, tim=1317749855745025
*** 2011-10-04 23:07:40.799
=====================
PARSING IN CURSOR #2 len=406 dep=0 uid=0 oct=47 lid=0 tim=1317749860799353 hv=4178600252 ad='478e46c0' sqlid='8z5gn0mwj0s9w'
declare
v_dbuser varchar2(32) ;
var_sid NUMBER;
var_serial NUMBER;
begin
select sys_context('USERENV','SESSION_USER') into v_dbuser from dual;
SELECT SID, serial#
INTO var_sid, var_serial
FROM v$session
WHERE SYS_CONTEXT ('USERENV', 'SESSIONID') = audsid;
sys.dbms_application_info.set_module(v_dbuser, null);
SYS.DBMS_SYSTEM.set_sql_trace_in_session (var_sid, var_serial, TRUE);
end;
END OF STMT
PARSE #2:c=76988,e=109996,p=0,cr=0,cu=0,mis=1,r=0,dep=0,og=1,plh=0,tim=1317749860799344
=====================
PARSING IN CURSOR #1 len=54 dep=1 uid=0 oct=3 lid=0 tim=1317749860821371 hv=552310686 ad='4793b5d0' sqlid='2yzdahhhfr5wy'
SELECT SYS_CONTEXT('USERENV','SESSION_USER') FROM DUAL
END OF STMT
PARSE #1:c=19997,e=19894,p=0,cr=0,cu=0,mis=1,r=0,dep=1,og=1,plh=1388734953,tim=1317749860821362
EXEC #1:c=0,e=39,p=0,cr=0,cu=0,mis=0,r=0,dep=1,og=1,plh=1388734953,tim=1317749860822306
FETCH #1:c=0,e=58,p=0,cr=0,cu=0,mis=0,r=1,dep=1,og=1,plh=1388734953,tim=1317749860822419
STAT #1 id=1 cnt=1 pid=0 pos=1 obj=0 op='FAST DUAL (cr=0 pr=0 pw=0 time=0 us cost=2 size=0 card=1)'
CLOSE #1:c=1000,e=687,dep=1,type=3,tim=1317749860823263
=====================
PARSING IN CURSOR #1 len=86 dep=1 uid=0 oct=3 lid=0 tim=1317749860845379 hv=3278699504 ad='4793b444' sqlid='dv6dxh31qtyzh'
SELECT SID, SERIAL# FROM V$SESSION WHERE SYS_CONTEXT ('USERENV', 'SESSIONID') = AUDSID
END OF STMT
PARSE #1:c=21996,e=22022,p=0,cr=0,cu=0,mis=1,r=0,dep=1,og=1,plh=644658511,tim=1317749860845371
EXEC #1:c=0,e=76,p=0,cr=0,cu=0,mis=0,r=0,dep=1,og=1,plh=644658511,tim=1317749860846365
FETCH #1:c=1000,e=1085,p=0,cr=0,cu=0,mis=0,r=1,dep=1,og=1,plh=644658511,tim=1317749860847543
STAT #1 id=1 cnt=1 pid=0 pos=1 obj=0 op='NESTED LOOPS (cr=0 pr=0 pw=0 time=0 us cost=0 size=117 card=1)'
STAT #1 id=2 cnt=1 pid=1 pos=1 obj=0 op='NESTED LOOPS (cr=0 pr=0 pw=0 time=0 us cost=0 size=104 card=1)'
STAT #1 id=3 cnt=1 pid=2 pos=1 obj=0 op='FIXED TABLE FULL X$KSUSE (cr=0 pr=0 pw=0 time=0 us cost=0 size=78 card=1)'
STAT #1 id=4 cnt=1 pid=2 pos=2 obj=0 op='FIXED TABLE FIXED INDEX X$KSLWT (ind:1) (cr=0 pr=0 pw=0 time=0 us cost=0 size=26 card=1)'
STAT #1 id=5 cnt=1 pid=1 pos=2 obj=0 op='FIXED TABLE FIXED INDEX X$KSLED (ind:2) (cr=0 pr=0 pw=0 time=0 us cost=0 size=13 card=1)'
CLOSE #1:c=0,e=8,dep=1,type=3,tim=1317749860848409
EXEC #2:c=46992,e=47145,p=0,cr=0,cu=0,mis=0,r=1,dep=0,og=1,plh=0,tim=1317749860848519
*** 2011-10-04 23:07:48.446
CLOSE #2:c=0,e=44,dep=0,type=0,tim=1317749868446462
=====================
PARSING IN CURSOR #1 len=36 dep=0 uid=0 oct=47 lid=0 tim=1317749868452507 hv=4128301241 ad='43cc3bbc' sqlid='5t10uu7v11s5t'
BEGIN DBMS_OUTPUT.ENABLE(NULL); END;
END OF STMT
PARSE #1:c=5999,e=5409,p=0,cr=0,cu=0,mis=1,r=0,dep=0,og=1,plh=0,tim=1317749868452500
EXEC #1:c=1000,e=1082,p=0,cr=0,cu=0,mis=0,r=1,dep=0,og=1,plh=0,tim=1317749868454166
CLOSE #1:c=0,e=27,dep=0,type=0,tim=1317749868456571
=====================
PARSING IN CURSOR #2 len=48 dep=1 uid=0 oct=3 lid=0 tim=1317749868460092 hv=2334772408 ad='4c94ceb4' sqlid='cjk1ffy5kmm5s'
select obj# from oid$ where user#=:1 and oid$=:2
END OF STMT
PARSE #2:c=1000,e=1645,p=0,cr=0,cu=0,mis=0,r=0,dep=1,og=4,plh=1964104430,tim=1317749868460085
EXEC #2:c=1000,e=531,p=0,cr=0,cu=0,mis=0,r=0,dep=1,og=4,plh=1964104430,tim=1317749868461643
FETCH #2:c=1999,e=1461,p=0,cr=3,cu=0,mis=0,r=1,dep=1,og=4,plh=1964104430,tim=1317749868463587
STAT #2 id=1 cnt=1 pid=0 pos=1 obj=500 op='TABLE ACCESS BY INDEX ROWID OID$ (cr=3 pr=0 pw=0 time=0 us cost=2 size=24 card=1)'
STAT #2 id=2 cnt=1 pid=1 pos=1 obj=501 op='INDEX UNIQUE SCAN I_OID1 (cr=2 pr=0 pw=0 time=0 us cost=1 size=0 card=1)'
CLOSE #2:c=0,e=7,dep=1,type=3,tim=1317749868464199
=====================
PARSING IN CURSOR #1 len=54 dep=1 uid=0 oct=3 lid=0 tim=1317749868465603 hv=2201826955 ad='4c97e470' sqlid='0m78skf1mudnb'
select audit$,properties from type_misc$ where obj#=:1
END OF STMT
PARSE #1:c=1000,e=422,p=0,cr=0,cu=0,mis=0,r=0,dep=1,og=4,plh=3506511888,tim=1317749868465597
EXEC #1:c=0,e=39,p=0,cr=0,cu=0,mis=0,r=0,dep=1,og=4,plh=3506511888,tim=1317749868466196
FETCH #1:c=0,e=726,p=0,cr=3,cu=0,mis=0,r=1,dep=1,og=4,plh=3506511888,tim=1317749868467149
STAT #1 id=1 cnt=1 pid=0 pos=1 obj=502 op='TABLE ACCESS CLUSTER TYPE_MISC$ (cr=3 pr=0 pw=0 time=0 us cost=2 size=46 card=1)'
STAT #1 id=2 cnt=1 pid=1 pos=1 obj=3 op='INDEX UNIQUE SCAN I_OBJ# (cr=2 pr=0 pw=0 time=0 us cost=1 size=0 card=1)'
CLOSE #1:c=0,e=144,dep=1,type=1,tim=1317749868467616
=====================
PARSING IN CURSOR #2 len=185 dep=1 uid=0 oct=3 lid=0 tim=1317749868469076 hv=1850944673 ad='4c9d8f00' sqlid='3ktacv9r56b51'
select owner#,name,namespace,remoteowner,linkname,p_timestamp,p_obj#, nvl(property,0),subname,type#,d_attrs from dependency$ d, obj$ o where d_obj#=:1 and p_obj#=obj#(+) order by order#
END OF STMT
PARSE #2:c=1000,e=478,p=0,cr=0,cu=0,mis=0,r=0,dep=1,og=4,plh=4184428695,tim=1317749868468625
EXEC #2:c=999,e=923,p=0,cr=0,cu=0,mis=0,r=0,dep=1,og=4,plh=4184428695,tim=1317749868470434
FETCH #2:c=3000,e=2985,p=0,cr=7,cu=0,mis=0,r=1,dep=1,og=4,plh=4184428695,tim=1317749868473470
FETCH #2:c=0,e=571,p=0,cr=0,cu=0,mis=0,r=0,dep=1,og=4,plh=4184428695,tim=1317749868474130
STAT #2 id=1 cnt=1 pid=0 pos=1 obj=0 op='SORT ORDER BY (cr=7 pr=0 pw=0 time=0 us cost=11 size=327 card=3)'
STAT #2 id=2 cnt=1 pid=1 pos=1 obj=0 op='NESTED LOOPS OUTER (cr=7 pr=0 pw=0 time=0 us cost=10 size=327 card=3)'
STAT #2 id=3 cnt=1 pid=2 pos=1 obj=104 op='TABLE ACCESS BY INDEX ROWID DEPENDENCY$ (cr=4 pr=0 pw=0 time=0 us cost=4 size=81 card=3)'
STAT #2 id=4 cnt=1 pid=3 pos=1 obj=106 op='INDEX RANGE SCAN I_DEPENDENCY1 (cr=3 pr=0 pw=0 time=0 us cost=3 size=0 card=3)'
STAT #2 id=5 cnt=1 pid=2 pos=2 obj=18 op='TABLE ACCESS BY INDEX ROWID OBJ$ (cr=3 pr=0 pw=0 time=0 us cost=2 size=82 card=1)'
STAT #2 id=6 cnt=1 pid=5 pos=1 obj=36 op='INDEX RANGE SCAN I_OBJ1 (cr=2 pr=0 pw=0 time=0 us cost=1 size=0 card=1)'
CLOSE #2:c=0,e=10,dep=1,type=1,tim=1317749868474627
=====================
PARSING IN CURSOR #2 len=56 dep=1 uid=0 oct=3 lid=0 tim=1317749868475584 hv=3993603298 ad='4c9d8298' sqlid='8swypbbr0m372'
select order#,columns,types from access$ where d_obj#=:1
END OF STMT
PARSE #2:c=1000,e=926,p=0,cr=0,cu=0,mis=0,r=0,dep=1,og=4,plh=893970548,tim=1317749868475577
EXEC #2:c=0,e=50,p=0,cr=0,cu=0,mis=0,r=0,dep=1,og=4,plh=893970548,tim=1317749868476239
FETCH #2:c=0,e=132,p=0,cr=2,cu=0,mis=0,r=0,dep=1,og=4,plh=893970548,tim=1317749868476597
STAT #2 id=1 cnt=0 pid=0 pos=1 obj=105 op='TABLE ACCESS BY INDEX ROWID ACCESS$ (cr=2 pr=0 pw=0 time=0 us cost=3 size=161 card=7)'
STAT #2 id=2 cnt=0 pid=1 pos=1 obj=108 op='INDEX RANGE SCAN I_ACCESS1 (cr=2 pr=0 pw=0 time=0 us cost=2 size=0 card=7)'
CLOSE #2:c=0,e=12,dep=1,type=1,tim=1317749868477440
=====================
PARSING IN CURSOR #2 len=47 dep=1 uid=0 oct=3 lid=0 tim=1317749868481084 hv=1023521005 ad='4ca12498' sqlid='cb21bacyh3c7d'
select metadata from kopm$ where name='DB_FDO'
END OF STMT
PARSE #2:c=1000,e=830,p=0,cr=0,cu=0,mis=0,r=0,dep=1,og=4,plh=3452538079,tim=1317749868481079
EXEC #2:c=0,e=54,p=0,cr=0,cu=0,mis=0,r=0,dep=1,og=4,plh=3452538079,tim=1317749868481617
FETCH #2:c=1000,e=385,p=0,cr=2,cu=0,mis=0,r=1,dep=1,og=4,plh=3452538079,tim=1317749868482481
STAT #2 id=1 cnt=1 pid=0 pos=1 obj=552 op='TABLE ACCESS BY INDEX ROWID KOPM$ (cr=2 pr=0 pw=0 time=0 us cost=1 size=108 card=1)'
STAT #2 id=2 cnt=1 pid=1 pos=1 obj=553 op='INDEX UNIQUE SCAN I_KOPM1 (cr=1 pr=0 pw=0 time=0 us cost=0 size=0 card=1)'
CLOSE #2:c=0,e=11,dep=1,type=1,tim=1317749868482607
=====================
PARSING IN CURSOR #5 len=406 dep=0 uid=0 oct=47 lid=0 tim=1317749868920033 hv=4178600252 ad='478e46c0' sqlid='8z5gn0mwj0s9w'
declare
v_dbuser varchar2(32) ;
var_sid NUMBER;
var_serial NUMBER;
begin
select sys_context('USERENV','SESSION_USER') into v_dbuser from dual;
SELECT SID, serial#
INTO var_sid, var_serial
FROM v$session
WHERE SYS_CONTEXT ('USERENV', 'SESSIONID') = audsid;
sys.dbms_application_info.set_module(v_dbuser, null);
SYS.DBMS_SYSTEM.set_sql_trace_in_session (var_sid, var_serial, TRUE);
end;
END OF STMT
PARSE #5:c=3000,e=2993,p=0,cr=0,cu=0,mis=0,r=0,dep=0,og=1,plh=0,tim=1317749868920026
=====================
PARSING IN CURSOR #6 len=54 dep=1 uid=0 oct=3 lid=0 tim=1317749868921319 hv=552310686 ad='4793b5d0' sqlid='2yzdahhhfr5wy'
SELECT SYS_CONTEXT('USERENV','SESSION_USER') FROM DUAL
END OF STMT
PARSE #6:c=1000,e=234,p=0,cr=0,cu=0,mis=0,r=0,dep=1,og=1,plh=1388734953,tim=1317749868921314
EXEC #6:c=0,e=33,p=0,cr=0,cu=0,mis=0,r=0,dep=1,og=1,plh=1388734953,tim=1317749868921426
FETCH #6:c=0,e=37,p=0,cr=0,cu=0,mis=0,r=1,dep=1,og=1,plh=1388734953,tim=1317749868921496
STAT #6 id=1 cnt=1 pid=0 pos=1 obj=0 op='FAST DUAL (cr=0 pr=0 pw=0 time=0 us cost=2 size=0 card=1)'
CLOSE #6:c=0,e=8,dep=1,type=3,tim=1317749868922312
=====================
PARSING IN CURSOR #6 len=86 dep=1 uid=0 oct=3 lid=0 tim=1317749868922414 hv=3278699504 ad='4793b444' sqlid='dv6dxh31qtyzh'
SELECT SID, SERIAL# FROM V$SESSION WHERE SYS_CONTEXT ('USERENV', 'SESSIONID') = AUDSID
END OF STMT
PARSE #6:c=0,e=38,p=0,cr=0,cu=0,mis=0,r=0,dep=1,og=1,plh=644658511,tim=1317749868922408
EXEC #6:c=0,e=523,p=0,cr=0,cu=0,mis=0,r=0,dep=1,og=1,plh=644658511,tim=1317749868923008
FETCH #6:c=1000,e=1034,p=0,cr=0,cu=0,mis=0,r=1,dep=1,og=1,plh=644658511,tim=1317749868924071
STAT #6 id=1 cnt=1 pid=0 pos=1 obj=0 op='NESTED LOOPS (cr=0 pr=0 pw=0 time=0 us cost=0 size=117 card=1)'
STAT #6 id=2 cnt=1 pid=1 pos=1 obj=0 op='NESTED LOOPS (cr=0 pr=0 pw=0 time=0 us cost=0 size=104 card=1)'
STAT #6 id=3 cnt=1 pid=2 pos=1 obj=0 op='FIXED TABLE FULL X$KSUSE (cr=0 pr=0 pw=0 time=0 us cost=0 size=78 card=1)'
STAT #6 id=4 cnt=1 pid=2 pos=2 obj=0 op='FIXED TABLE FIXED INDEX X$KSLWT (ind:1) (cr=0 pr=0 pw=0 time=0 us cost=0 size=26 card=1)'
STAT #6 id=5 cnt=1 pid=1 pos=2 obj=0 op='FIXED TABLE FIXED INDEX X$KSLED (ind:2) (cr=0 pr=0 pw=0 time=0 us cost=0 size=13 card=1)'
CLOSE #6:c=0,e=7,dep=1,type=3,tim=1317749868925014
EXEC #5:c=5000,e=4799,p=0,cr=0,cu=0,mis=0,r=1,dep=0,og=1,plh=0,tim=1317749868925309
=====================
PARSING IN CURSOR #6 len=52 dep=0 uid=0 oct=47 lid=0 tim=1317749868931018 hv=1029988163 ad='47885f94' sqlid='9babjv8yq8ru3'
BEGIN DBMS_OUTPUT.GET_LINES(:LINES, :NUMLINES); END;
END OF STMT
PARSE #6:c=2000,e=1998,p=0,cr=0,cu=0,mis=1,r=0,dep=0,og=1,plh=0,tim=1317749868931012
=====================
PARSING IN CURSOR #7 len=132 dep=1 uid=0 oct=3 lid=0 tim=1317749868933509 hv=2328831744 ad='4c975250' sqlid='ga9j9xk5cy9s0'
select /*+ index(idl_sb4$ i_idl_sb41) +*/ piece#,length,piece from idl_sb4$ where obj#=:1 and part=:2 and version=:3 order by piece#
END OF STMT
PARSE #7:c=0,e=199,p=0,cr=0,cu=0,mis=0,r=0,dep=1,og=4,plh=1697022209,tim=1317749868933503
EXEC #7:c=0,e=121,p=0,cr=0,cu=0,mis=0,r=0,dep=1,og=4,plh=1697022209,tim=1317749868934465
FETCH #7:c=1000,e=975,p=0,cr=4,cu=0,mis=0,r=1,dep=1,og=4,plh=1697022209,tim=1317749868935481
FETCH #7:c=0,e=28,p=0,cr=3,cu=0,mis=0,r=1,dep=1,og=4,plh=1697022209,tim=1317749868936446
FETCH #7:c=0,e=37,p=0,cr=1,cu=0,mis=0,r=0,dep=1,og=4,plh=1697022209,tim=1317749868937047
STAT #7 id=1 cnt=2 pid=0 pos=1 obj=227 op='TABLE ACCESS BY INDEX ROWID IDL_SB4$ (cr=6 pr=0 pw=0 time=0 us cost=3 size=18 card=1)'
STAT #7 id=2 cnt=2 pid=1 pos=1 obj=238 op='INDEX RANGE SCAN I_IDL_SB41 (cr=4 pr=0 pw=0 time=9 us cost=2 size=0 card=1)'
CLOSE #7:c=0,e=14,dep=1,type=1,tim=1317749868937451
=====================
PARSING IN CURSOR #7 len=132 dep=1 uid=0 oct=3 lid=0 tim=1317749868938386 hv=4260389146 ad='4c9747c4' sqlid='cvn54b7yz0s8u'
select /*+ index(idl_ub1$ i_idl_ub11) +*/ piece#,length,piece from idl_ub1$ where obj#=:1 and part=:2 and version=:3 order by piece#
END OF STMT
PARSE #7:c=1000,e=902,p=0,cr=0,cu=0,mis=0,r=0,dep=1,og=4,plh=3246118364,tim=1317749868938380
EXEC #7:c=0,e=537,p=0,cr=0,cu=0,mis=0,r=0,dep=1,og=4,plh=3246118364,tim=1317749868939041
FETCH #7:c=1000,e=365,p=0,cr=4,cu=0,mis=0,r=1,dep=1,og=4,plh=3246118364,tim=1317749868939444
FETCH #7:c=0,e=19,p=0,cr=1,cu=0,mis=0,r=0,dep=1,og=4,plh=3246118364,tim=1317749868939513
STAT #7 id=1 cnt=1 pid=0 pos=1 obj=224 op='TABLE ACCESS BY INDEX ROWID IDL_UB1$ (cr=4 pr=0 pw=0 time=0 us cost=3 size=44 card=2)'
STAT #7 id=2 cnt=1 pid=1 pos=1 obj=235 op='INDEX RANGE SCAN I_IDL_UB11 (cr=3 pr=0 pw=0 time=0 us cost=2 size=0 card=2)'
CLOSE #7:c=0,e=10,dep=1,type=1,tim=1317749868940075
=====================
PARSING IN CURSOR #7 len=135 dep=1 uid=0 oct=3 lid=0 tim=1317749868940494 hv=1115215392 ad='4c973d38' sqlid='c6awqs517jpj0'
select /*+ index(idl_char$ i_idl_char1) +*/ piece#,length,piece from idl_char$ where obj#=:1 and part=:2 and version=:3 order by piece#
END OF STMT
PARSE #7:c=999,e=390,p=0,cr=0,cu=0,mis=0,r=0,dep=1,og=4,plh=1319326155,tim=1317749868940488
EXEC #7:c=1000,e=269,p=0,cr=0,cu=0,mis=0,r=0,dep=1,og=4,plh=1319326155,tim=1317749868941383
FETCH #7:c=0,e=592,p=0,cr=4,cu=0,mis=0,r=1,dep=1,og=4,plh=1319326155,tim=1317749868942015
FETCH #7:c=0,e=20,p=0,cr=1,cu=0,mis=0,r=0,dep=1,og=4,plh=1319326155,tim=1317749868942341
STAT #7 id=1 cnt=1 pid=0 pos=1 obj=225 op='TABLE ACCESS BY INDEX ROWID IDL_CHAR$ (cr=4 pr=0 pw=0 time=0 us cost=3 size=20 card=1)'
STAT #7 id=2 cnt=1 pid=1 pos=1 obj=236 op='INDEX RANGE SCAN I_IDL_CHAR1 (cr=3 pr=0 pw=0 time=0 us cost=2 size=0 card=1)'
CLOSE #7:c=0,e=10,dep=1,type=1,tim=1317749868942446
=====================
PARSING IN CURSOR #7 len=132 dep=1 uid=0 oct=3 lid=0 tim=1317749868943358 hv=1684122946 ad='4c9732ac' sqlid='39m4sx9k63ba2'
select /*+ index(idl_ub2$ i_idl_ub21) +*/ piece#,length,piece from idl_ub2$ where obj#=:1 and part=:2 and version=:3 order by piece#
END OF STMT
PARSE #7:c=1000,e=883,p=0,cr=0,cu=0,mis=0,r=0,dep=1,og=4,plh=2317816222,tim=1317749868943351
EXEC #7:c=0,e=549,p=0,cr=0,cu=0,mis=0,r=0,dep=1,og=4,plh=2317816222,tim=1317749868944005
FETCH #7:c=2000,e=1322,p=1,cr=4,cu=0,mis=0,r=1,dep=1,og=4,plh=2317816222,tim=1317749868945367
FETCH #7:c=0,e=28,p=0,cr=3,cu=0,mis=0,r=1,dep=1,og=4,plh=2317816222,tim=1317749868945473
STAT #7 id=1 cnt=2 pid=0 pos=1 obj=226 op='TABLE ACCESS BY INDEX ROWID IDL_UB2$ (cr=5 pr=1 pw=0 time=0 us cost=3 size=40 card=2)'
STAT #7 id=2 cnt=2 pid=1 pos=1 obj=237 op='INDEX RANGE SCAN I_IDL_UB21 (cr=3 pr=0 pw=0 time=9 us cost=2 size=0 card=2)'
CLOSE #7:c=0,e=540,dep=1,type=1,tim=1317749868946060
EXEC #6:c=22996,e=23633,p=1,cr=49,cu=0,mis=1,r=1,dep=0,og=1,plh=0,tim=1317749868955046

Need to set module name = username in V$sqlarea

Hi All,
I tried to set module name same as schema name in v$sqlarea, generally it was sql*plus. For that i created one after database logon trigger, but it didn't work for all users, it is only working for SYS schema only.
CREATE OR REPLACE TRIGGER LOGIN_USERS_TRIG_NEW
AFTER LOGON ON DATABASE
declare
v_dbuser varchar2(32) ;
begin
select sys_context('USERENV','SESSION_USER') into v_dbuser from dual;
dbms_application_info.set_module(v_dbuser);
end;
result will verify from
select module , parsing_schema_name from v$sqlarea;
so if i am logging with scott user then in v$sqlarea table module name should be scott only. so whatever queries was executed from scott all queries module name should scott only.
Like that for all users. Please suggest is there any other option.
Thanks in advance,

user583843 wrote:
Hi All,
I tried to set module name same as schema name in v$sqlarea, generally it was sql*plus. For that i created one after database logon trigger, but it didn't work for all users, it is only working for SYS schema only.
CREATE OR REPLACE TRIGGER LOGIN_USERS_TRIG_NEW
AFTER LOGON ON DATABASE
declare
v_dbuser varchar2(32) ;
begin
select sys_context('USERENV','SESSION_USER') into v_dbuser from dual;
dbms_application_info.set_module(v_dbuser);
end;
result will verify from
select module , parsing_schema_name from v$sqlarea;
so if i am logging with scott user then in v$sqlarea table module name should be scott only. so whatever queries was executed from scott all queries module name should scott only.
Like that for all users. Please suggest is there any other option.
Thanks in advance,in which schema's context, is trigger fired & run?
with Oracle everything is denied; except that which is explicitly GRANTed.
is SCOTT allowed to EXECUTE TRIGGER?
is SCOTT allowed to access SYS_CONTEXT?
etc.

Need Help Setting Up Testing Server

Hi. I have been using Dreamweaver for a while, but am
extremely new at the whole testing server thing, as I have been
building only simple pure-html pages.
I am want to password protect a part of my site using the
Insert > Data Objects > User Authentication > Log In User.
I have already converted my whole site from .html pages to
.php pages, because I thought that .html pages wouldn't work.
Everytime I try to use that Log In User menu command,
Dreamweaver gives me a dialog box that says, "Before inserting this
object, please do the following: 1. Create a site for this file 2.
Choose a document type 3. Set up the site's testing server".
Numbers 1 and 2 have a checkbox which I am assuming means they are
done correctly. But number 3 (set up teh site's testing server) has
no checkbox and the dialog box will not allow me to click OK, which
leads me to assume that I need to accomplish the aforementioned
step number 3.
So I go to the Site Definition for my site and under the
Advanced Tab go to Testing Server. I want PHP MySQL as the server
model, so I chose that. And I am guessing I need to choose
Local/Network for the Access option because
the computer I am building this site on is not connected to the
internet. (I have no intention of hooking this machine up to
the internet becauase all of my work I have ever done is on it!)
Now, here lies my main question: What should the Testing
server folder be? And what should the URL prefix be? And do I need
to change anything else?
If I am not being clear about anything regarding my
questions, please make a point of it, and I will try to be more
clear.
Thank you so much for helping!

> Host Directory:/root folder/ (if no root folder
directory use "/"
Or leave it blank.
> FTP Host:yoursite.com
I see that this is a *real* domain, with a real registration.
It's best to
just use 'example.com' for dummy domain names.
> URL Prefix:
http://your-site.com/
Ditto. And by the way, there was no hyphen when you first
used this!
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"DWFAQ.info" <[email protected]> wrote in
message
news:gkeu60$hjl$[email protected]..
> You need to be connected to the internet to test dynamic
attributes.
>
> For advanced/testing server enter the following
formatted exactly as it is
> displayed:
>
> Access:FTP
> FTP Host:yoursite.com
> Host Directory:/root folder/ (if no root folder
directory use "/" no
> quotations)
> Login:Host login Username
> Password: Host Login Password
> Check Save checkbox
> No other checkboxes
> URL Prefix:
http://your-site.com/
>
> Click the test button and see what happens.
>
> Best,
>

Need help with updating Name Server update for home webserver

I set up a webserver at home to run my own domain/website. I am able to type my IP address into Safari/IE and get to my website fine. I now need to update the NameServer with the previous domain hosting service, but I have no idea how to find out the NameServer (Compast is my ISP) to put into the UPDATE NAME SERVERS form for the previous hosting company. I need to obviosly do this before people who type in my web address can be directed to my home server instead of the old hsoting company. The previous hosting server is ns.teammediaonline and ns1.teammediaonline.com. Do I use something like ns.comcast.net or something? I already have the IP address and know it works fine. Comcast does notchange the IP's too often and I will not have much traffic to my site, so I should not have any issues with them. I am sure this is a very simple issue. Any help would be greatly appreciated.

Hi--
You definitely do not want to contact Comcast. Servers are forbidden to their residential customers. If you contacted them, not only would they refuse to help, that might put you on a list to watch in case you do set one up. Now, if you're careful, don't server out a lot of traffic, and aren't a general nuisance to the people on your node, they most likely won't notice if you don't contact them.
However, you'll need to look into a different DNS solution. Do a search for "Dynamic DNS" and you'll find a number of services that will be able to help you out. This one, DynDNS, has some reading material that might help to explain what you need to do...
charlie

Need help setting up Mac server for dental practice?

My dentist is running windows server 2003 and wants to do a total upgrade to Apple server components. The issue is that the software his office uses for patient records is not Mac compatible. He is really set on the Mac environment and is curious if he can run the software on a Mac running Windows and I guess my question is the same. I don't have the specifics on the software he needs to run but from what he says it is fairly low overhead and handles some large jpeg files but mostly small data files.
I am curios how difficult the task of migrating all the info into the Mac environment will be? He is also curious about remote access from home or wherever he needs to get to his info and am curious if a VPN or other method is best.
Thanks

Ok, I am a sucker. I will bite.
The answer is yes. OS X and OS X Server can run Windows in a virtual machine using Parallels of VMWare (or virtual box, or Crossover, or... you get my point). This will allow you to run Mac hardware with Mac software but at the same time run Windows and the required applications.
But, there is a cost penalty here. First, there is the cost of the hardware. Not a big deal, Apple is competitive in price and the server hardware is very nice. Then there is the cost of Windows and the VM software. This is your tax. You have to add these costs on top of what you are already buying and then there is the hidden cost of the additional support. You are now supporting two operating systems, OS X and Windows. And just because Window is running on a Mac does not make it immune to viruses/spyware/trojans/etc.
If this guy really wants to go the Mac route, then go all Mac. Check out http://www.macpractice.com/mp/dds/ or http://www.macdentpro.com/index.php or do a search. There are a number of products that can handle dental practices on Macs, including the radiology aspect. Google is your friend.
As for remote access, OS X Server has a VPN built in that works well. That is not a problem. Or you can get a dedicated VPN appliance to handle security. Once bit of advice. Make sure you implement a good backup solution. Don't be foolish and think that TIme Machine alone is going to save you. This is medical records. Do not mess with them. Spend the dollars to properly harden the environment and ensure record retention policies are met.
Hope this helps

Need help setting up Lion Server

Here's my story... I got a 2006 Xserve for free. It has 2 dual core 2.66 Xeons, 4 GB of RAM, and 2 300 GB SAS drives that I have turned into a RAID 1 array. I've installed OS X Lion Server on it and all is running okay. My OS X Server knowledge is slim to none. I do a little work with it at my job, but our main servers are Windows. I'd like to set it up as a DHCP and Open Directory server at home, just for fun. My home network consists of this Xserve, my 27" iMac, a MacBook Pro, an Xbox, a Samsung TV, a couple of iPads and our iPhones.
I go from my Charter modem, to my AirPort Extreme, and then broadcast wirelessly to my other devices, and have my Xserve plugged into port 1.
To get DHCP working, do I need to go from my modem to my Xserve, and then from my Xserve to the WAN port on my AirPort Extreme? Or do I just need to configure something?
Thanks in advance for any help you can offer!

If you have just Lion Server installed, go here for the rest of the tools:
http://support.apple.com/kb/DL1528
This will include Server Admin. It will allow you to define DHCP, DNS, and other services not available in Lion's Server.app.
You networking knowledge will apply here. It sounds like you want to use the Xserve as the NAT gateway. This is possible, but you will need Server Admin to make it easier.

Need help setting up xrdp server on my Arch

Hey,
I want to set up an XRDP/VNC server on my personal computer which is running the latest Arch linux (X64).
I wanted to use xrdp as I am going to connect to my computer from a windows based OS (work).
I want to be able to do so using microsoft's RDP program (mstsc) as I am unable to install any software I like, it's a laptop from work.
So far I have downloaded and installed XRDP from AUR and installed the tightvnc as it was a dependency.
Right now I am kind of clueless about what to do/config/etc..
Help will be appreciated.
Thanks !

From one newb to another, I can give the process I took to get it running. First and foremost, uninstall xrdp from the AUR, I could not get it to work no matter what I tried
Next you will need to make sure xvnc is working properly, this can be done by:
Xvnc :1
More then likely you will get several font errors, as Xvnc is looking for its fonts in the /usr/X11R6/lib/X11/fonts directory, and Arch deposits that in the /usr/share/fonts directory. So to fix this we do:
ln -s /usr/share/fonts /usr/X11R6/lib/X11
now try the Xvnc command above, it should work properly this time (might be a font error or two but the server is running).
So now that we have Xvnc running properly, lets go to sourceforge and gank the latest xrdp tar ball... http://xrdp.sourceforge.net/
I used the standard install (generic linux install) with "tar zxvf" then "make" and then "make install"
If you are using KDE, you should be all set, if another WM, then search through the forums (Ubuntu had several hits on xrdp and are Gnome specific) as I would more then likely steer you in the wrong direction.
Next we need to remove the lock on Xvnc :0 so it can restart (or you can restart your system if it makes you feel better), its in the /tmp/ as .X10-lock
then run the following command to startup xrdp:
/usr/local/xrdp/xrdp_control.sh start
I hope this helps, if not completely, at least in the proper direction. As I mentioned, there is a lot of info in the Ubuntu forums on xrdp, some of it is helpful, other is meh

Need help setting up FTP server.

I have a networked video server that converts analog video from my security cameras to mpeg, it has an internal FTP client that I have pointed to a share on my server, with the correct login info. This will all occur on my intranet and if possible I do not want FTP open to the internet. I can not connect to the server via FTP. Any advice would be appreciated.

John, this is all very vague.
What is your FTP software? or if inbuilt to the OS, which OS is it? Mac, Windows, other?
When you say you can't connect to the FTP box, is this using your "Video server" (What OS is it)?
Have you tried using another machine to connect to your server?
More info please...

Need help setting up local server to test my pages on my laptop

Hey i'm at home and i'm trying to set dreamweaver up so i can
test this site locally how do i set up the dreamweaver to use it
and when i tell it preview in browser it will work i'm new at
setting it up and i'm confused...

quote:
Originally posted by:
Newsgroup User
What scripting model are you using, and what OS are you
running?
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"Codeman0013" <[email protected]> wrote in
message
news:e7hsdv$i2i$[email protected]..
> Hey i'm at home and i'm trying to set dreamweaver up so
i can test this
> site
> locally how do i set up the dreamweaver to use it and
when i tell it
> preview in
> browser it will work i'm new at setting it up and i'm
confused...
>
i'm running xp pro sp2 and its an asp page

I was given a nano and need to set up name and sync under me; how do I do this, undoing the link to the person I got it from?

I am currently looking at the manual under syncing with itunes, step 2 and it does not pull up for me to automatically to be able to put my info in so I am assuming it is using prior users.

Hello Jenamin,
After reviewing your post, I have located an article that can help in this situation. It contains helpful advice concerning restoring devices:
Restoring iPod to factory settings
http://support.apple.com/kb/ht1339
Additional Information
How to rename your iPod
iPod does not appear in iTunes or on the desktop, an exclamation point or sad iPod icon appears onscreen
iPod only shows an Apple logo and doesn't start up
Your Windows PC doesn't recognize iPod
iPod doesn't appear in iTunes or on my Mac desktop
Thank you for contributing to Apple Support Communities.
Cheers,
BobbyD

WRT610N - Need to Set Static IP for Server and Port Forwarding

Does anyone know how I can assign a static IP for my Home Media Server in the WRT610N router? I need to do this because of the settings I need to set for the server in the Single Port Forwarding.
Thanks in advance!

Never mind. I got it.

Do we need to set up Name Server?

Similar Messages

Maybe you are looking for