Does a shop in the UK fit invisible shields?

I just got the zagg full body shield and dont wanna fit it myself when the iphoen comes is there a shop that does it for a small fee? in the UK

I would not worry about the water damage. Even too much spray won't hurt it. They have included the squeegee so that you get no air-bubbles. Here is some advice, have a cleaning cloth next to you, as you gently use the squeegee to remove the air bubbless and some extra water, run it along the side and as some water comes out quickly use the cleaning cloth do wipe out the water. As you get near the home button as you squeeze out, put the cloth over the home button so that as you squeeze out the water will to to the cloth. Same for the ear speaker.
Just don't spray the solution onto the device itself.
I have used bodyguardz for my device before (same type as invisible shield), and I have never damaged my device at all.

Similar Messages

Ipod in the car with invisible shield

I have Blitzsafe ipod adapter installed in the car and hook up my ipod with the bottom connector which plays through the car stereo and charges at the same time.
I had the invisible shield on but the ipod got very warm and froze. I took the shield off and so far the ipod is working fine. It still gets warm but did not shut down or freeze. Anyone have experience like this ?
Now I've the ipod in the Agent18 case and the ipod is fine so far in the car.

I use the Blitzsafe to charge my iPod and it never seems to overheat.
(As an aside: I don't use it for the audio because I found it to boost the bass unreasonably. Only one of my two Blitz units does this, so I imagine it's just a bad unit.)

Water under the screen while applying the invisible shield

I was applying the full body invisible shield and since it was difficult to apply the back(as suggested by every one) I did it one night switched the phone off all the time and the next morning it was fine and i loved it as it was looking good and on top of it it was protecting the back side of the phone.
The next night i applied the front side(supposed to be the easy side and child's play) and to my annoyance when I switched the phone back on in the morning there was water(? solution for applying the screen protector)under the screen. The screen looks awful
The ringer volume plays up now and switching on the phone is a bit cumbersome as it plays (sometimes in one go sometimes I have to use the home button and the power button together).
My phone is new ,bought on the 2nd of April 2010 and what do I do now? will apple warranty cover this?

Apple will not cover any moisture damage to the iPhone.
You can see if the moisture sensors are tripped or not. If they are then you are out of luck on warranty, no questions asked. Here is Apple's support document of inspecting the moisture sensors...
http://support.apple.com/kb/HT3302
If the sensors are not tripped, Apple would probably not cover the iPhone under warranty if there is visible signs of water (or liquid) behind the screen. If the button problems are not that bad, then you could switch the iPhone off and place in a bag of dry rice. It might help draw out some of liquid from the screen.
Personally I would stay away from anything that requires liquid to install. If done wrong it can kill the phone, which may be the case here. You can still make an appointment at an Apple store to look into an out of warranty replacement, which would get you a refurbished iPhone for a flat rate. The other option would be to check to see if there are any local third party repair centers. They may be cheaper than the out of warranty replacement, but at the same time could be more.

Invisible shield and iphone dock

Hi. Can someone pls help me? I was thinking of buying an invisible shield for my new iphone 3G to keep it looking great. However, I am a bit worried that if I fit a shield to it, it will not fit in the dock. Does anybody have an invisible shield on their iphone and can you tell me if it can still fit in the dock?

I put the full body invisible shield on mine. I did drop it from the back of a parked car onto the street. I was sure that there would be damage, but there is not even a dent to the shield.
I really recommend it, but take time with the installation if you are worried about perfection. The bubbles NEVER seem to work their way out if you do not get them out during installation. It is better to remove it immediately and reapply if there are too many bubbles.
I do, however, highly recommend it, especially compared to some other screen protectors which seem to come off over time, and are hard to apply correctly. The invisible shield can be slid around while still wet, which is great if you have huge, fumbling, sausage fingers like me.

Invisible Shield...to install or not to install.

I've been reading up on the invisible shield online and in this forum for about a week, I ordered mine last Tuesday, and I expect it to be in the mail today when I get home.
A couple things from my reading and talking to a friend who saw a black nano with the invisible shield:
Pros: Sleek, shows the ipod the way it was meant to be (sort of)
Cons:
A) I'm kind of scared putting a wet piece of plastic on my nano.
B) Leaves a lot of residue, in case I have to return nano to apple for service (very likely) will be a hassle.
C) Doesn't look as clean as would like
D) Can't use ipod for 24hours (yea, it's only a day, but after only having my nano for a week, this thing goes where I go, blasting constantly).
E) Deliberately putting water on my nano.....kind of freaks me out.
F) The back piece is a pain in the *** to put on from what i've read, and if I did this I might not put on the back, which kinds of conflicts the original point of buying one in the first place.
I'm currently using ipod socks on my nano and works pretty good. Only problem is that it slips out of the sock in my pocket sometimes. My friend said I should wash my sock and dry it in the dryer, and it will shrink and be a perfect fit.
I'm also kind of interested in a zcover but that has mixed reviews also, or an icondom.
Ultimately I will need to use my nano in an armband at the gym.
So give me some input. Should I use the invisible shield or return it? Should I continue to use the sock until something better comes along?
Any constructive input appreciated.

I spent a lot of time reading up on nano protectors before finally ordering the invisible shield. I had gotten over the fear of putting water on the nano after hearing about one that survived a washing machine. Follow the instructions on the website and you should be fine. Don't be afraid to readjust it several times when applying it, that did not appear to affect it at all. I did have a few air bubbles under the front piece(I did apply that first) but now after a week all but one has disappeared. The back was a little tricky but it actually came out looking better(no airbubbles at all). I have read about a lot of people leaving the back off because they don't care if that gets scratched. Granted it has only been a week but I have very happy with it so far. According to the site for invisible shield it will not leave residue when removed though I have not tested it myself. Hope this helps!

Icondom vs Invisible shield

Hi,
I installed the Icondom on my nano and I am 100% satisfied with it,
I showed it to my friend who bought the invisible shield and he couldn,t believe it, the Icondom is less visible, his Invisible shield makes his nano looks blurry. He paid $20.00 for his invisible shield and I paid only $6.00 for my Icondom on e-bay!!!!!
Mike

tbh, i was under the impression that invisible shield was a 1 piece "case" type product, having looked deeper it's obviously the same type of "sticker" protection as icondom so the invisible shield doesn't appear to be worth the extra money (which bummed me out cos i ordered one a few days ago for $19.99c/£11.57p) but now this raises another problem, bear with me
when i got the nano, inside the box the nano had a "thick" polythene wraparound, obviously you take that bit off, but underneath that is a screen protector that covers the whole front of the player, now, this seem to be the same type of thing as the icondom/invisible shield, & after a week of being in my pocket this has now started to peel & it's actually torn a little bit, can i expect the same from the other "3rd party" products ? & if so how often would they need replacing ? (tho given the price i reckon i'll order a pack of icondom as backup straight away )
thanks for any help

HT201401 i have a birthday showing in my calendar listed as an all day event and it is incorrect how can I delete it. When clicked on does not bring up the edit feature. The vodaphone shop thinks it has synced with my facebook app.

i have a birthday showing in my calendar listed as an all day event and it is incorrect how can I delete it. When clicked on does not bring up the edit feature. The vodaphone shop thinks it has synced with my facebook app.

hello, the addons manager is exactly the right place to look for it. please try disabling the addons that are listed there one-by-one (a restart of the browser might be necessary after each step). maybe one of them is bundling this kind of adware.
[[Disable or remove Add-ons]]

I just downloaded the new itunes update, now I can't copying TV shows purchased from the library to my backup computer, it says the files are invisible. Never had any problem doing it until the update.

I just downloaded the new itunes update, now I can't copying TV shows purchased from the library to my backup computer, it says the files are invisible. Never had any problem doing it until the update. I have a Mac Pro G5 OS 10.6.8. The desktop hidden files app doesn't reveal the TV shows.

found a solution in a different discussion.. thank god.

Does The Invisible Shield Marr Out Existing Scratches On iPod?

When you put an invisible shield on your ipod, do you no longer notice the scratches that exist on your ipod?

i'm also wondering if the crystal shield by istyle does the same thing.

Does any one use the SPIGEN iphone case? if so, can you tell me the difference between the ultra fit, ultra fit a, ultra fit s, and ultra hybrid? also does this case get in the way of the camera flash? i ask because the camera opening seems so small.

also if you dont recommend this case please point in the direction of the best slim fit case

The Ultra Fit A has a cutout on back to display the Apple logo. The Ultra Fit and Ultra Fit S do not. And the Ultra Fit and Ultra Fit A are a soft matte finish all over, while the Ultra Fit S has a brushed finish in its midsection.
The Ultra Hybrid is a bumper, with back protection. (1) It's made of TPU (for anti-shock) vs. the all polycarbonate (for anti-slip) Ultra Fit/A/S.
(2) It also has power and volume buttons overlaying Apple's, which the Ultra Fits do not. (3) Lastly, it covers all four sides, whereas the Ultra Fits cover the left and right sides and wrap around the four corners, leaving the top and bottom exposed (which is good if you want to connect some models of headphones or adapters that require more space there).
They're all properly designed for the 5/5S flash, including the black around that cutout (you don't want to buy a case that doesn't have a black rim there).
IMO Spigen's slim cases are better made/more durable than other third-party cases (of which I've bought aplenty). I love mine!

Does Apple Canada have the worst customer support ever?

Yes! Ask me why...
I'm posting here a) to warn other Mac users what to expect if you ever need customer support and b) because there's no where you can actually e-mail comments to Apple, and trying to contact customer support has been fruitless (see below).
Here's what happened to me...
I bought my iBook just under three years ago - a few weeks ago, the logic board went. Now, because I purchased the computer less than three years ago, that's covered under the extended warranty for iBook logic boards (see here: http://www.apple.com/support/ibook/faq/).
Simple, right? Well, I took my computer in to my local authorized service provider about three weeks ago. They confirmed the logic board was the problem... copied my receipt for the iBook to prove date of purchase... agreed that it was covered by the warranty.
However, when they sent all this to Apple, their reply was that it was NOT covered because it was manufactured more than three years ago (although Apple's own website says it's purchase date - not manufacture date - that's important).
I called Apple last Monday to find out what was going on. Spoke to a nice fellow named Kevin who said he'd look into it, and call me back the next day.
Next day passed... no call. I called Kevin back left a message, and indicated I'd like to know what was going on.
Wednesday passed... no call. By this point, I'm getting anxious - the service provider can't move ahead without authoriztion from Apple, Apple's not returning my calls (or the service provider's) to grant authorization.
I tried Kevin again on Thursday. Left another message. No reply.
Tried back on Friday morning. Left another message. Still no reply.
Called customer support again Friday night. Antoine puts me hold for a half hour. I call back, explain that I've been on hold for half an hour, ask how long the wait should be. Antoine says two or three minutes. He puts me on hold again.
For another ten minutes.
I call back. Antoine explains that the reason I'm on hold is probably because customer service is closed. So why was I on hold for nearly an hour listening to terrible music? That's one of the mysteries of Apple customer support...
So here I am, with a computer that's been in the shop nearly three weeks, that can't be repaired because Apple won't honour its warranty, and no way to even find out what's going on, because Apple's customer service is such an unnavigable maze.
The sad thing is, I usually like Apples. I was even going to buy a new one this summer.
Now - not a chance.
The moral of the story? If you own an Apple, pray nothing ever goes wrong with it. If you expect your computer to ever need repairs, I'd suggest getting rid of your Apple now.
If you're considering buying an Apple - consider again.
As for me - from now on, make mine Microsoft.
iBook G3 700 Mac OS X (10.4.6)

Does Apple Canada have the worst customer support ever?
I doubt it.
Seriously, would you like some help?
Call back, and don't mess around with Customer Service. Immediately ask for Customer Relations. These are the people whose job it is to make an unhappy customer happy again. They aim to please.
A polite, but seriously disappointed tone of voice is what you need, so take some deep breaths until you can achieve that.
There was an article in the February, 2005, issue of Reader's Digest called "How to Complain." Please read these tips. Then call and tell Customer Relations your sad experience with Customer Service.
How to Complain
You call customer service to complain about a product, and you hang up angrier than when you started. That’s customer rage, a feeling experienced by millions of people with a major complaint, says Scott Broetzmann, president of an American firm that tells companies how to offer the best customer service. His secrets to getting good service:
Have a goal
If you want your product repaired, say so. Want an apology? Speak up.
Keep it short
Focus on one problem, and be succinct.
Stick with it.
You have to invest the time it takes. Don’t get what you want? Ask for a supervisor.
Skip ultimatums
Don’t threaten not to do business with them again. Why should they help you if you won’t buy from them in the future?
Plead your case
Many companies have information such as how much money you’ve spent with them and how often you complain. If you’re a good customer, they may be more willing to help.
Be nice
You’re unlikely to get what you want if you’re rude.
Good luck!
(P.S. Microsoft doesn't make computers; just the crappy OS that goes on them.)

Field BSEG-HKTID does not exist in the additional data Screen

Hi
We are facing a problem while posting the parked document. Field BSEG-HKTID does not exist in the screen SAPLF040 0331.
As we want to avoid entering the field-data at the time of payment proposal run using T.code F110, we prefer to enter at the time of posting a parked document or at the time of parking.
We had checked the field status (of Posting key and GL) and its not available.
We refered note 953374 House bank details: Account ID in the document. It asks to activate the RE-FX component. However, we are not in the real estate business hence not logical to do so. How do we need to proceed?
PP

To do the same change with the transaccion FB02 y FB03, create an enhancemente point in the program: SAPMF05L dynpro: 1301, module: DYNPRO_MODIFIKATION, at the of perform open_fi_dynpro_mod and write:
LOOP AT SCREEN.
IF sy-tcode = 'FB02'.
    IF screen-name = 'BSEG-HKTID'.
      screen-input = 1.
      screen-invisible = 0.
      screen-active = 1.
      screen-output = 1.
      screen-group4 = ' '.
      MODIFY SCREEN.
      EXIT.
    ENDIF.
elseif sy-tcode = 'FB03'.
      IF screen-name = 'BSEG-HKTID'.
      screen-input = 0.
      screen-invisible = 0.
      screen-active = 1.
      screen-output = 1.
      screen-group4 = ' '.
      MODIFY SCREEN.
      EXIT.
    ENDIF.
endif.
ENDLOOP.
and, all ready.

Why does Preview automatically resize the text box to cut off the last character of added text? How do I fix it?

Why does Preview automatically resize the text box to cut off the last character of added text? How do I fix it?
I use the Tools > Annotate > Add Text feature, and when I click away after adding text, it automatically changes the text box size such that the last letter -- or last word -- gets bumped off into an invisible line below it, forcing me to manually adjust every single text box. It is highly annoying when trying to complete PDF forms (e.g. job applications).
It appears to be a glitch, quite honestly, an error resulting from Apple's product design. Has it been fixed in the new operating system (for which they want $30)?
I would very much appreciate any help you can provide! Thank you for your time.

* "Clear the Cache": Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
* "Remove the Cookies" from sites that cause problems: Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
* Don't make any changes on the Safe mode start window.
See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]

Log scale of the axis and the best-fit line

I try to plot a graph and set the scale of the x-axis to log scale and then i try to plot a linear trendline (best fit line). but the linear trendline does now show on the graph. but if i set the axis scale to linear, then the trendline does show. i will need my graph in the log scale and also a linear best fit line. please help me out

0
100
3.00E-09
71.52
1.00E-08
57.3
3.00E-08
39.15
1.00E-07
24.13
3.00E-07
14.77
1.00E-06
7.22
i meant you these data, and left column is x-axis and gonna use log scale for the axis. the right column is the y axis. and then i need a best fit line for this graph.. hope you can help me

Field BSEG-HKTID. does not exist in the screen SAPMF05A 0332

Dear ALL,
Our client is ECC 6.0
we are facing a problem while posting the park document
Field BSEG-HKTID. does not exist in the screen SAPMF05A 0332
   Message no. 00349
Diagnosis
   The specified field does not exist on the screen.
Procedure
   Check your batch input data.
The above problem occurs only after the Patch level upgradation only.
SAP suggest refer your sap note 953374 House bank details : account id in the document.
It says activate the RE-FX component.
Any how we are not in the real estate business.
Please provide me your suggestion to resolve the problem.
Thanks for your cooperation
Regards,
laxminarayan

To do the same change with the transaccion FB02 y FB03, create an enhancemente point in the program: SAPMF05L dynpro: 1301, module: DYNPRO_MODIFIKATION, at the of perform open_fi_dynpro_mod and write:
LOOP AT SCREEN.
IF sy-tcode = 'FB02'.
    IF screen-name = 'BSEG-HKTID'.
      screen-input = 1.
      screen-invisible = 0.
      screen-active = 1.
      screen-output = 1.
      screen-group4 = ' '.
      MODIFY SCREEN.
      EXIT.
    ENDIF.
elseif sy-tcode = 'FB03'.
      IF screen-name = 'BSEG-HKTID'.
      screen-input = 0.
      screen-invisible = 0.
      screen-active = 1.
      screen-output = 1.
      screen-group4 = ' '.
      MODIFY SCREEN.
      EXIT.
    ENDIF.
endif.
ENDLOOP.
and, all ready.

Does a shop in the UK fit invisible shields?

Similar Messages

Maybe you are looking for