Does Repetitive Manufacturing Supports CO-Product Costing as well.

Please can any one answer whether Repetitive Manufacturing supports the C-Products costing.
I have 6 Co-Products coming out of my process and cost of all should be calculated and shall be taken as benefit for Main product costing.
Thanks and Regards
Khadeer

Hi,
Are you asking whether SAP PP module support co-product as compare to PP-PI module?
Yes, SAP PP module support co-product, in the BOM item basic data screen (CS01/CS02) you can indicator whether the item is a co-product or not. You should post this to PP forum instead of MM forum.
best regards,

Similar Messages

Product cost by period

hello gurus,
Can anyone please tell me the what are the configuration is required to Product cost by period
thanks
rihana

Dear Rihana,
In my understanding product cost by period will be used in a REM scenario(Repetitive manufacturing).
The product cost collector serves as the cost collecting object and for each Semifinished or finished product for which
confirmation(backflush through T Code MFBF) are made a product cost collector should exist.
Product cost collector will be generally created for Order type RM01 and number ranges has to be defined.
Each product cost collector has a number and using the no,the variance and the cost will be settled periodically.
Product cost collectors will be created using T Code KKF6N or KKF6M and the preliminary cost estimate can be done through
MF30.
Regards
Mangalraj.S

CK11N Costing variant Repetitive Manufacturing

Hi ,
T code : OKKN we are able to find the Costing variant - PREM -Repetitive Manufacturing Version.
While costing the productin in CK11N , Costing Variant does not display PREM.
Could you pls suggest how to find.
Regards

If you go to OKKN, you will see that PREM is confiured as a Prem Cost Element.
Ck11N, looks at planned values for product Costing, therefore this cannot be used.
You cant use PREM, even if you were to copy it, you cant change the field.
If you copy a standard one, then it will appear in CK11N, i.e. PPC1, however if you copy PREM it will still not appear.
it appears to be down to the Valuation Variant, and it seems that 19 is not a recognised value for CK11N.
Message was edited by:
Mark Chalfen

Cost of finished product repetitive manufacturing

Hi,
My clients produces 5 different finshed products always. I want to map the scenario in Repetitive manufacturing.
Is it possible in REM to get the actual cost of production of 5 products separately?? fir example can i get cost of finished product 1 as Rs200, in the month of Jan2009 for 10 quantity, cost of finished product 2 in the month of Jan2009 for 5 quantity etc etc .
Regards.

Thanks to all for their valuable inputs.
Dear Mangalraj: Its really a challenge for me to decide whether to go for REM or not. The reason why I am not going for discrete is :
1. Client doesnt know how much of ( for example) fertilizers it issues for finished 1 or finished 2 . client says he knows that in a month how much he has used for example 100 kg of fertilizers in total, not on basis of finished goods. So, i think i will have problem during BOM creation and goods issue in particular.
2. Since finished products are rose plants, jasmine plants etc, client says i dont how much to do Goods reciept. few plants may still be not ready to be able to do goods reciept.Client says its very difficult for me to count flower plants everyday and then say out of 1000, 10 are ready to be done Goods reciept and 15 are dead so these should be scrapped etc.
These are the resons why i thought it to map to REM. But client also wants to know price of each plant , means whats the price of rose plant(per plant), price of jasmine plant( per plant).
Request you all to throw some light on this..
Regards.

What are the different steps for costing related to repetitive manufacturi

Hi PP guys
can any one explain the different steps for costing in repetitive scenario as compared to discrete scenario what is the major difference
thanks
shaik

Dear Michel,
!.In REM scenario Product cost collector is required for all the products for which production booking is
to be done.
2.For each production version created a product cost collector will be created in KKF6N.
3.Without a product cost collector production confirmation can not be done in MFBF.
4.Product cost collector is the cost object in REM scenario.
5.Once after creating material master,BOM,work center,rate routing,aproduction version the next steps
is creating product cost collector.
6.While creating the PCC,the system creates a preliminary cost estimate nothing bu the sum up of the
BOM and dare routing cost.
7.Either a prelimnary cost or a standard cost estimate can be used for doing the production
confirmation in MFBF as per the REM profile assigned.
8.Standard cost estimate can be done in CK40N and this costs gets updated in the material master.
9.For every production confirmation made in MFBF the costs gets accumulated in the respective PCC.
10.the variances can be settled periodically as per the business requirement.
Regards
Mangalraj.S

Evaluation Structure for Production Order and Repetitive Manufacturing

Dear PP friends,
I am trying to create a Evaluation Structure with reference to an Evaluation Structure (t-code MCR7). I need to join the Standard Evaluation Structures S021 (Production Order) and S026 (Material Usage), but S021 is not appearing to choose characteristics and key figures.
Does anyone have suggestions?
My requirement is to create a report where I can see goods receipt x goods issues per order.
Thanks in advance.
Marcos

Hi,
As we know that In Repetitive Manufacturing, components are often staged at the production line without reference to a particular order.
To create the demand program again for your production order, you must define the planning strategy for a product. Planning strategies represent the methods of production for planning and manufacturing or procuring a product. and run the scenario accordingly.
Regards
Chandra

Production Order in Repetitive Manufacturing

Hi All,
We are using REM scenarios. But we need to use the Production order for some material in the same plant where we are already using REM.
Is it possible to use both Discrete and REM for the same material but at different periods? Using Discrete for some period and switching over to REM. Is there is anyway to use the above mentioned scenario.
Kindly suggest.
Regards,
Sureshbabu G.

Hi,
As we know that In Repetitive Manufacturing, components are often staged at the production line without reference to a particular order.
To create the demand program again for your production order, you must define the planning strategy for a product. Planning strategies represent the methods of production for planning and manufacturing or procuring a product. and run the scenario accordingly.
Regards
Chandra

Repetitive Manufacturing Profiles

Hi Experts,
i have a question about REM profile:
in the repetitive manufacturing profile (REM profile) that we want to post activities,
what was the difference beetwen standard cost estimate for material and preliminary cost estimate for the product cost collector in sales order related production,
what is the result of each selection in sales order related production and which setting is recommended for this case,
I would be highly appriciated if you can respond in detail.
Your help would be appreciated.
Thanks.
Azam

Dear Azam,
1. If in the REM profile if the radio button is selected against standard cost estimate,then while doing
backflushing the system picks up the standard cost estimate of the material from the material master and
confirmations are made & variances are calculated.That's CK40N is to be carried out periodically.
If there's no standard cost estimate for a material means then you cant do the confirmation in MFBF.
2. If in the REM profile if the radio button is selected against preliminary cost estimate means while creating
the product cost collector for a material and saving means then based on this cost itself confirmations can
be made in MFBF,no need to carryout the costing run in CK40N.You can see any standard cost of the
material in the material master in costing 2 view.
3. In the case of Make to Order scenario as per to my knowledge based on preliminary cost estimate it self
we can do the confirmation.
4. Please check these links [Standard Price with Valuated Sales Order Stocks |http://help.sap.com/saphelp_erp60_sp/helpdata/en/90/ba63e7446711d189420000e829fbbd/frameset.htm]
[Example for Valuated Sales Order Stock Without Product Cost by Sales Order: Quantity and Value Flow |http://help.sap.com/saphelp_erp60_sp/helpdata/en/90/ba63e7446711d189420000e829fbbd/frameset.htm]
[Product Cost Collectors in Sales-Order-Related Production |http://help.sap.com/saphelp_erp60_sp/helpdata/en/90/ba63e7446711d189420000e829fbbd/frameset.htm]
Regards
Mangalraj.S

Product cost Colletors

Hi Gurus.,
While I am doing with Backflush, an error is coming stating that,
Error in Reading the Reporting Point Data.
Diagosis:
system indicating that, the product Cost Collector created without Reporting Point.
But when i creating the product cost colletor, i never i come across with the option, Reporting Point.
So, Please help me out from this, and share the inputs.
Thanks in Advance.,
Raja
RAJA SHEKHAR TALLURI

Hi Raja,
SAP defines the Reporting Points as "An operation in repetitive manufacturing that is flagged as a milestone in the routing."
So to create Reporting Points follow the following steps:
i)Initially goto the transaction for creating Routing, Say CA01.
II) After entering the selection criteria you will be taken to a screen for defining Task List. Having defined the Task List Place your cursor on the same and click on to the "Operations" Tab
iii) While defining the Operations, we have a field called "Control Key" Place cursor on the same and press F4.
iv)List of Control Key gets displayed. In that choose the Control Key that you would be using and find the field Cnf in that line. Place your cursor on that field Cnf corresponding to the chosen Control key and select
1 Milestone confirmation (not PS/PM)
Once this this selected, then that operation is the Reporting Point.
This is how you create Reporting Point
Kindly let me know if this is useful without fail.

Query on Repetitive Manufacturing

Hi PP GUrus,
I have few queries on REM in PP.
As in case of REM we dont have Production Orders we only have Planned Orders..Correct me if I am wrong..
1) Can we calculate WIP in case of Repetitive Manufacturing. If yes then how and will it be calculated on Planned Orders.
2) I need to do settltmernt in CO. For that the order to be used will be Planned Order or what is the process.
3) Also if some one can give me a step by step process for REM then it will be really helpful.
Regards
Ashish

>As in case of REM we dont have Production Orders we only have Planned Orders..Correct me if I am wrong..
Its correct
1) Can we calculate WIP in case of Repetitive Manufacturing. If yes then how and will it be calculated on Planned Orders.
While doing settlement in KK87, WIP has posted to financial posting
2) I need to do settltmernt in CO. For that the order to be used will be Planned Order or what is the process.
YOu need to give Material and plant to run settlement
3) Also if some one can give me a step by step process for REM then it will be really helpful.
1)create plan MD61
2) run MRP: MD02
3) create product cost collector- KKf6N
4) preliminary costing for PCC & costing is carried out In KKF6n
5) Material staging: MF60
6) Rem Backflush: MFBF
7) Run Overhead- Co42
8) Run variance- KKs6
9) Run settlement- KK87
display report of PCC0 -KKBC_PKO

Daily Product Cost

Hi,
Is it possible to get a daily product cost. Can any one explain me the implications for getting daily product cost from PP point of view and also CO point of view. Whether Repetitive manufacturing solves this issue? Please reply immediately.
Regards
Prashanth

Hi Ashok,
I am asking is it possible to get daily product cost report. What are implications or difficulties in getting daily product cost report from CO point of view. From CO point of view we need to settle the production orders daily where settlemet is a monthly activity and also the allocations. I request you to tell me what are implications in doing the daily product costing to arrive at daily product cost report.
Regards
Prashanth

What type of HDD does MS-6382 support?

Hi,
My system has a MS-6382 mobo & I've got to change to the hard drive. I've been looking at ebay & the link below describes a HDD which has "ATA/133 or SATA interface and capacity of 120 GB"
http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&category=16178&item=5208766733&rd=1
I don't know much about computers, or even the right questions to ask really, but does the 6382 support 7200rpm drives, ATA/133? What general specs for a HDD should I be looking for?
I would be grateful for any help anyone can give!
Here is some info on my current HDD:
HD Tune: ST380020A Information
Firmware version : 3.39
Serial number : 5GC0KMYD
Capacity : 73.1 GB (~78.5 GB)
Buffer size : 2048 KB
Standard : ATA/ATAPI-6
Supported mode : UDMA Mode 5 (Ultra ATA/100)
Current mode : UDMA Mode 5 (Ultra ATA/100)
S.M.A.R.T : yes
48-bit Address : no
Read Look-Ahead : yes
Write Cache : yes
Host Protected Area : yes
Device Configuration Overlay : yes
Automatic Acoustic Managment : yes
Power Managment : yes
Advanced Power Managment : yes
Power-up in Standby : no
Security Mode : yes
Firmware Upgradable : yes
Partition : 1
Drive letter : C:\
Label : MR01-G4
Capacity : 74822 MB
Usage : 17.54%
Type : FAT32
Bootable : Yes
Jorolat

Quote from: Wonkanoby on 19-June-05, 21:26:02
ata 133 is just a marketing gimick.............only data moves that fast is 2mb in the drives cache
the drive will run at about half that speed once the cache is cleared
dont worry about it
Er, I got another question
I'm now looking at this hitachi model:
http://www.cclonline.com/product-info.asp?id=210&pc=dealtime#
which has good reviews (probably for others in the range). I originally saw it on ebay but it turns out to be cheaper buying it from the above supplier.
The question I have is does the MS 6382 support serial ATA? I'm reasonably sure that the above drive is parallel ATA (ie compatable with the MS 6382) because of the manufacturer's info here:
http://www.hitachigst.com/hdd/support/d7k250/d7k250.htm
but I thought I'ld ask before I order it or in case I change my mind (again).
Thankyou for your help
Jorolat

Error while creating product cost collector in REM ?

HI, all SAP expert,
I have to run repetitive manufacturing .
I create work center of category production line and use in rate routing of semifinished material.
In mm02 -- mrp 4 view of semifinished material , i select rem profile , production version.
Now I create product cost collector ( t-code kkf6n) for semi. material by giving order type (yrem), production version after enter it shows error
Error in number management (notify your system administrator)
in help it shows
Error in number management (notify your system administrator)
Message no. KO162
Diagnosis
A system error occurred in the number management.
Procedure
Please contact your systems analyst or the SAP hotline.
Edited by: Nitin Nerkar on Sep 30, 2009 12:16 PM

Dear Nitin,
Check whether is the number range maintained properly for the order type RM01,check the config setting in T Code
KOT2_PKOSA.
This is related to CO Module.
Check and revert back.
Regards
Mangalraj.S

WIP FOR REPETITIVE MANUFACTURING WITH VALUATED SALES ORDER

Dear All,
We are in the process of implementing Repetitive manufacturing with valuated sales order(MTO). I want to clarify whether in this scenario WIP will be generated.
Since, at the time of final backflushing, what ever GR done for finished goods, the GI for its components will be done automatically. The components will be issued based on the BOM. I think in this scenario WIP will not be there.
Please tell me whether i am correct.
regards
ranga

Thanks. I have another scenario. My client wants to transfer all cost of HR,Admin, finance etc and other indirect production cost center cost to production cost center. I mean they want to charge on the product. I have to production cost center. Client will give me the basis for allocating the cost. I have to do assessment and distribution for cost allocation
But, I want to clarify how do i include the admin, hr or finance and indirect production cost center cost in cost component structure if i do the above process.
How to do the cost splitting.
regards
ranga

Product costing valuated sales order stock

Hi all,
We are in complex mfg & currently re-vamping all the ERP SAP instances ( totalling 13 company codes into one single)
All 13 units( who use NON Valuated scenarios for cost object controlling) wil use valuated sales orders & projects. The old 13 companies will be trated as profit centers with transfer pricing functionality ( Multiple valuations)
My issue is to get a product cost for sales order in profit center view ( plan cost) exactly same as to the marked standard cost itemisation of the FERT material.
We mark & release the std cost in Jan & the client wants to have the same itemisation of the cost ( with same values) even if they create a sales order in 2nd or 3rd or last quarter. ( As you might be knowing that the sales order wil always cal;culate the values as per the current qty structure date. In Std SAP date control, there is nothing which allows us to cost exactly the same cost estimate as marked & released in JAn)
Could somebody pls give pointers as how to get this sales order plan cost itemisation exactly equal to prevously marked & released itemisation ?
We use the Std costing variant ( Costing Type = Profit center valuation) with Std date control.
Thanks in advance to all of you,
Warm Regards
Dhiraj

Hi,
If the sales order stock is valuated, you have immediate access to its value in Financial Accounting. The assigned accounts are debited and credited as a result of the valuated goods movements. From the viewpoint of MRP, the sales order stock is available for the sales order only.
If the sales order stock is not valuated, it is managed via a cost collector. The system does not carry out invoice verification postings for goods movements, and you cannot obtain an overview of how the stock is valuated until the end of the settlement period in Controlling.
Valuated sales order stocks have the following advantages:
The full costs are available at each manufacturing level.
All goods movements are immediately reflected in Financial Accounting
Assign points if helpful
Regards,
Saurabh

Does Repetitive Manufacturing Supports CO-Product Costing as well.

Similar Messages

Maybe you are looking for