Does the DDL and DTS Connect Pack work with a X-Fi Xtreme Music UAA

? Hello,
hope u don't mind my English. I have learned it a long time ago, don't need it very often and the grammer was always my problem.
I know the patch works with a X-Fi Xtreme Music, but I am not sure about the UAA (what does this mean and do I need optical or coax out). I tried the titanium pcie before but then I have the skipping/lags effect like some others with Powerdvd9 Ultra as well. It seems that there is no workaround for this. I have no problems with my old X-Fi Xtreme Audio
Thanks in advance
scorpie
PS.
Maybe there is a workaround now but I can't find something
Some infos:
Board Asus P5B
2 Nvidea Gards 8800GT and 9500 GT (no SLI)
XP 64 bit SP3
8GIG Ram
LG GGC-H20L

SPDIF out has nothing to do with support. I have no idea what hte Xtreme Music UAA supports. I would imagine if it uses the DSP from the normal X-FI line, it would. If it uses the DSP from the Xtreme Audio, it won't.

Similar Messages

DDL and DTS connect pack compatibility

Does anyone know if DDL & DTS connect pack is compatible with Windows 7?
Thanks

I had to run the DDL pack installer in Windows Vista SP2 compatibility mode to make it install (overrides OS detection). Otherwise I have no problems with it. I don't use the Windows 7 beta drivers because they suck, use the latest official Vista drivers until Creative releases a new set and you should be [email protected]

Cant get DTS Connect to show when I install the DD Live and DTS connect pack

Whats up with this?
I bought the DD Li've and DTS Connect Pack yesterday. After installing and restarting machine I go into the Creative Console Launcher and I can only see DD Li've available and not DTS Connect. My receiver send out and supports DTS fine as I been using it all the time with DTS supported video files. The only way I can get DTS now is if I disable DD Li've so it picks up the signal. I'm using Win XP Pro.
This is what it is showing.

Exactly the same problem for me.
I have a SB X-Fi Titanium Fatalty pro Series PCI express withe the latest drivers? http://www.touslesdrivers.com/index....3&v_code=24368, with vista 64 bits SP.
I also installed the 2 plugins DDL 3.00.00 and DTS connect .03.00 but i don't have the DTS choice as you could see on this printscreen ...
[img]http//img99.imageshack.us/img99/4843/sbtit.jpg[/img]
Thank you for help ...
Message Edited by didierh on 05-26-2009 06:3 AM

Does the "Mini DisplayPort to VGA Adapter" work with all Samsung tv models?

Does the "Mini DisplayPort to VGA Adapter" work with all Samsung tv models?

It's a VGA adapter. Nothing special about that. If your Samsung monitor supports VGA then it will work.
But why not go completely digital and use a Mini DisplayPort to HDMI adapter to skip the analog conversion? It also supports passing audio over HDMI.
About Mini DisplayPort to HDMI adapters

Does the QT MPEG2 Playback Component install & work with QT X ?

I am installing a new iMac with Snow Leopard.
Does the QT MPEG2 Playback Component install & work with QT X ?
(btw, I have already done the optional install of QT7 from the SN DVD).

Does the QT MPEG2 Playback Component install & work with QT X ?
I cannot get "muxed" MPEG2 content (e.g., VOB) file to load in QT X but both QT 7 Pro (with usual audio limitations) and MPEG Streamclip still function normally under Snow Leopard. (Since I don't normally use QT X, I had to actually run a quick test to see what would happen and haven't really performed any real tests. So take my comments with a grain of salt at this time.)
with such files on my PB Pro.

Does the new command 2 binary format work with Apple Push Notification Service? I receive an invalid response status code of 128.

Does the new command 2 binary format work with Apple Push Notification Service? I am sending 2 messages with the same payload to 2 different devices. None of the messages display on either of the devices. It seems that at least 3 should have been displayed. For my first device, I received a response with an invalid status code of 128 and the message identifier is 2 indicating that the first message was OK. However no message was displayed on the phone. For the second device, I did not receive any error response, but no message was displayed on the device.
Does ANS perform any validation on the message identifier? The Local and Push Notification Programmin Guide says the message identifier is:
An arbitrary, opaque value that identifies this notification. This identifier is used for reporting errors to your server.
I know that the device tokens are valid because the same tokens work when I use the legacy basic or enhanced formats. The phones display the messages correctly when I send to ANS using the old ANS message format.
Here is the data and the response:
Sent to ANS: 2 0 0 0 158 1 0 32 120 107 166 143 171 157 143 169 70 135 12 135 246 142 64 224 244 44 116 4 154 65 115 192 206 28 189 56 174 0 172 16 2 0 23 123 34 97 112 115 34 58 123 34 97 108 101 114 116 34 58 34 65 66 67 34 125 125 3 0 4 0 0 0 2 4 0 4 83 7 119 141 5 0 1 5 1 0 32 120 107 166 143 171 157 143 169 70 135 12 135 246 142 64 224 244 44 116 4 154 65 115 192 206 28 189 56 174 0 172 16 2 0 23 123 34 97 112 115 34 58 123 34 97 108 101 114 116 34 58 34 65 66 67 34 125 125 3 0 4 0 0 0 3 4 0 4 83 7 119 141 5 0 1 5
ANS returned an error: 8 128 0 0 0 2
Sent to ANS: 2 0 0 0 158 1 0 32 4 239 182 26 13 237 170 136 41 243 181 57 120 208 135 19 101 102 212 70 55 244 251 255 160 125 82 9 10 143 72 17 2 0 23 123 34 97 112 115 34 58 123 34 97 108 101 114 116 34 58 34 65 66 67 34 125 125 3 0 4 0 0 0 5 4 0 4 83 7 119 147 5 0 1 5 1 0 32 4 239 182 26 13 237 170 136 41 243 181 57 120 208 135 19 101 102 212 70 55 244 251 255 160 125 82 9 10 143 72 17 2 0 23 123 34 97 112 115 34 58 123 34 97 108 101 114 116 34 58 34 65 66 67 34 125 125 3 0 4 0 0 0 6 4 0 4 83 7 119 147 5 0 1 5
ANS did not return a response.

Hello, can you please help me ?
You specified sample payload here:
TerrellFromLockhart wrote:
I finally got this to work. The picture in the Programming Guide is very confusing. The solution was to prefix every message's frame data with command 2 and that messsage's frame data length. Here is a sample:
ANS frame: 2 0 0 0 77 1 0 32 120 107 166 143 171 157 143 169 70 135 12 135 246 142 64 224 244 44 116 4 154 65 115 192 206 28 189 56 174 0 172 16 2 0 21 123 34 97 112 115 34 58 123 34 97 108 101 114 116 34 58 34 63 34 125 125 3 0 4 0 0 0 2 4 0 4 83 7 199 195 5 0 1 10 2 0 0 0 77 1 0 32 120 107 166 143 171 157 143 169 70 135 12 135 246 142 64 224 244 44 116 4 154 65 115 192 206 28 189 56 174 0 172 16 2 0 21 123 34 97 112 115 34 58 123 34 97 108 101 114 116 34 58 34 63 34 125 125 3 0 4 0 0 0 3 4 0 4 83 7 199 195 5 0 1 10 2 0 0 0 77 1 0 32 120 107 166 143 171 157 143 169 70 135 12 135 246 142 64 224 244 44 116 4 154 65 115 192 206 28 189 56 174 0 172 16 2 0 21 123 34 97 112 115 34 58 123 34 97 108 101 114 116 34 58 34 63 34 125 125 3 0 4 0 0 0 4 4 0 4 83 7 199 195 5 0 1 10
About to read response at Thu Feb 20 15:40:20 CST 2014
SocketTimeoutException
2 - is clearly command
0 0 0 77 - frame length
1 - item Id
what's 0 32 ? According to this page https://developer.apple.com/library/ios/documentation/NetworkingInternet/Concept ual/RemoteNotificationsPG/Chapters/Commu…
Item id should be followed by item length. But item length is obviously greater than 32 because device token's length is 32. Can you please explain why 0 32 were used? and do you have any insight on item id meaning ?

Does the Wacom Intuos Creative Stylus 2 work with Adobe Draw

Does the Wacom Intuos Creative Stylus 2 work with Adobe Draw?

IP,
I believe you should ask over here:
Adobe Illustrator Draw

Does the Digi@nywhere A/D Plus work with PCI Express ?

Hi guys!
I am planning to purchase a Digi@nywhere A/D Plus for my PC,
but all PCI slots on my K9N Diamond mainboard are already busy,
only the second PCI Express slot which can be used for a second
graphic card in SLI mode (my mainboard uses nForce 590 SLI chipset)
is free to use.
Can the Digi@nywhere A/D Plus work with my PCI Express slot,
which is primarily intended to be used for a second graphic card in SLI mode,
or not ?

you cannot put a pci device in a pcie slot

Dolby Digital Live and DTS Connect Pack not installing at all!!

I have (unfortunately) a Soundblaster X-Fi X-treme audio soundcard hooked up through an optical cable to my Inspire 5.1 Digital 5700 receiver. Of course, the sound card doesn't come with a Dolby Digital decoder, so it must be purchased seperately through Creative. Well, I downloaded (and PAID FOR) the software here after viewing and MAKING SURE my f'ing card was listed: http://buy.soundblaster.com/_creativ...DDN6Z2H2ADDEZD
However, when I go to install it the installer says "setup is unable to detect a supported product on your system" then closes. So that's fantastic. No explanations, no nothing. I have a supported card, updated drivers, but the software THAT I PURCHASED FROM CREATIVE simply is not detected. Of course, finding technical support from Creative is like finding water in the desert, so I am here. Can anyone please help me with this? I am about to call my bank and deny the $5.00 transaction if I cannot get this fixed, I've been working on it for two freaking hours now. ANY HELP is greatly appreciated.

Well, I had a reply typed and clicked "reply" but of course it asked me to log in again and lost my response. It seems their forums are quite awful as well. Suffice it to say, my soundcard is listed here: http://buy.soundblaster.com/_creativ...DDN6Z2H2ADDEZD where I purchased the product. My receiver is capable of playing DVD's in Dolby Digital, and all modern games support it, so I was of the understanding that all I needed was this DTS encoder.
I was quite angry when I wrote the post, as I couldn't get it to work, their tech support is abysmal (almost non-existent) and there were literally no instructions, it simply gave me the error and booted me. I have written a complaint to the better business bureau and will never again purchase another Creative product. They can $hit on consumers all they like, but consumers like me (and daniel_k it seems) will not forget so easily.

How to set up WRT54GS so the wired and wireless connections both work?

I have a DSL line in to a Motorola modem.
The modem is connected to the WRT54GS with an ethernet cable.
When I connect my computers directly into the WRT54GS with an ethernet cable (there are four connection spots at the back of the box), I cannot go to the internet. I have 3 computers plugged in, but none of them connect via Ethernet..
Is there a setting on the router so that I can use the router for both wired and wireless connectivity?
Added info: I tried to connect directly from the computer to the modem, but again, got no connectivity. When I "chatted" with ATT, they told me the modem is set to "bridge", and that I could connect only one device. I don't want to change this setting because I want to use the router for the wireless capability. Besides which, I have more than one computer to connect to the internet.
How come I cannot just plug in and go?
My firmware version is v2.07.1.
I don't know how to find out what hardware version I have.
Other info is "DirectEthernet Connection, Speed: 100.0 Mbps, Signal Strength: Excellent, Status: Connected"
Also "1394 Connection 3, Speed: 400.0 Mbps, Status: Connected"
I don't know what that's for, but thought it might prove useful to those of you who are knowledgeable about such things.
Wireless is ok, but if I'm sitting right next to the router, I'd like to connect with Ethernet and take advantage of the better speed, etc.
Thanks in advance.

Just click this link.

DDL and DTS Connect License Activation

When i try to activate thru the activation web site i get error. is the web site down?

Thanks for the reply.
I've just checked with the folks and it seems that the server over at our end is working properly. Could you try using a different browser and temporary disable the anti-virus program to see if it helps? If this is still not working for you, please log a support ticket with our Customer Support for further assistance.

Why does the drag and drop feature not work?

I have several files on my desktop. When I try to move them o a new location, they just 'snap back' to their original position. Why doesn't the drag and drop feature not function properly?

I'm just trying to move some files to a new position on the desktop.

How do I unlock myself out of my ipad when I don't remember the password and cannot connect to iTunes with out it requiring a password?

I recently made a dumb decision and changed my iPad pass code, I must have blanked out because I have no memory of the password to get in and now I'm locked out. iTunes is requiring the pass code but I don't remember it! I'm not connected to iCloud for some reason so I cannot reset my iPad. I feel that I have to resort to buying a new iPad. Please help!

How can I unlock my iPad if I forgot the passcode?
http://www.everymac.com/systems/apple/ipad/ipad-troubleshooting-repair-faq/ipad- how-to-unlock-open-forgot-code-passcode-password-login.html
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
You may have to do this several times.
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just canceling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
 Cheers, Tom

Does the Xbox 360 wireless adapter even work with the WRT54G wireless router?!!? If so, how???

I just bought a WRT54G wireless router (Ver 8.0; firmware updated to latest). I have successfully connected my wireless laptop using WEP security, but I'm at wits end trying to get the Xbox 360 wireless adapter to work. (It worked just fine with my Netgear router until that router recently died.)
When I do the "Test Media Connection" routine (you XBox 360 users know what I'm referring to), the Xbox immediately recognizes the Network Adapter and indicates that it is connected to the Wireless Network, but it inevitably fails the next step in the process: IP Address. I have the set-up for the IP address to be assigned automatically by the router (which is set for DHCP Server enabled).
I have gone around the mountain innumerable times myself and then with well-meaning friends who say try this, try that, try this, try that. I've had to re-establish my laptop set-up so many times I wanna scream!
Are the Xbox 360 wireless adapter and the WRT54G even compatible? If so, what am I missing here? I'm not too technical and obviously in over my head, but this ought not be that hard.
Please, please do NOT respond unless you KNOW the answer! I don't mean to be curt, but I'm over / past "suggestions to try."
Thank you VERY much for your time and consideration if you can help me.

I don't think that the X-BOX adapter is not compatible to wireless rotuer .... there are few settings you can try on the router ... Access router setup page ... Please click on the tab "Application and gaming" and click on sub tab "Port range forwarding" 1) On the first line in Application box type in "Xbox", in start box type in 88, in end box type in 88, in protocol keep it both, in ip address type in 192.168.1.20 and give a check mark on enable box. 2) On the second line in Application box type in "Xbox", in start box type in 3074, in end box type in 3074, in protocol keep it both, in ip address type in 192.168.1.20 and give a check mark on enable box. 3) Now save the settings 4) Once you return to the setup page, click on the tab "Administration" and disable the UPNP and save the settings. 5) Now assign the given ip address on your xbox ip address :- 192.168.1.20 subnet mask :- 255.255.255.0 default gateway :- 192.168.1.1 Please assign the dns address on the xbox primary dns :- 4.2.2.2 secondary dns :- 192.168.1.1 6) Please try to test your xbox live. Hope it works ...

Does the 1st generation apple wireless keyboard work with an iPad?

Hi
I want to get a keyboard for my iPad but I don't know if this one works with my iPad 2. Can someone help please??!!

Should work just fine, I have a 1G Apple wireless keyboard and it connected just fine to my iPad 3.
Any reason why you want to use a first generation Apple keyboard? They require 3 AA batteries and can drain them fairly fast. The second and present wireless keyboard only needs 2 AA's and the batteries last much longer. I use rechargeable batteries in my 2G keyboard as well and since my charger only charges batteries in pairs makes the 1G limited to alkaline batteries.

Does the DDL and DTS Connect Pack work with a X-Fi Xtreme Music UAA

Similar Messages

Maybe you are looking for