Doubt in Benefit Insurance plan enrollment with respect to Validity periods

HI Experts...
i have completed all nodes with respect to Insurance benefit plans.When im trying to enroll insurance palns through HRBEN0001,problem is occuring.In the enrollment screen 2 validaty periods are showing the system
(02-01-2000 to 07-08-2007),(07-09-2007 to 12-31-9999).
What is my mistake..Please advise me.
Thanks in advance.
Sairam

Hi Vikram,
You have nothing done any mistake. As the 2 records are meant for may be he is having 2 different plans during these 2 periods..
Thats why it is giving u the 2 records..
Cheers
JS

Similar Messages

Benefit - Insurance Plan not display at enrollment screen

Hi,
The issue is unable to see the configured Insurance plan at the enrollment screen (HRBEN0001).
What possibility that could caused this?
Thanks
Nikki

Ted,
Notice that in enrollment screen, I've clicked the adjustment reason, the plan screen is blank, I click the "error" button - there is message indicating that "wage type for salary calculation base does not exist".
Thanks

Benefit Insurance Plan

Hi,
Iu2019m new on Benefit. We have different benefit programs maintained in the table V_T5UBT. All benefit programs share one insurance plan (Insurance plan 1) through the table V_T5UBU. Now, we get a change request for the insurance plan 1, but this change request is only for one of the benefit programs.
Question:
Is there any way NOT to create new insurance plan , but just change the Insurance rule or variant for one of benefit programs only? Thanks.
Regards,
Jim Xin

Thanks for your reply.
But i have question like in which field i need to enter following details -
Age Min Max. female-NonSmoker Female Smoker Male-Non Smoker Male - Smoker
1 24 0.0500 0.0700 0.0500 0.0700
What is this amount exactly 0.0500,0.0700,0.0500,0.0700?Where i need to enter this amount in cost rule?
I assigned grouping but i am confused here.I received employee cost,cost factor,base unit ,employer credit,credit factor details in cost rule node.
Where i need to enter above coverage details???
Thanks waiting for reply.
Seema.
Edited by: seema sapkal on Feb 3, 2009 4:43 PM
Edited by: seema sapkal on Feb 3, 2009 5:02 PM

Key figure display in planning book with respect to Time bucket profile

Hi,
I am loading a key figure to planning area from the info cube for the current month. When I review the key figure in planning book with monthly time bucket profile it shows 85 for the current month. In the same planning book with weekly bucket profile, it shows 55 from the current week and future weeks and the remaining 30 goes into the past weeks of the current month.
How to make the total quantity 85 to show in the current and future weeks only.
thanks and regards
Murugesan

Hi Murugesan,
Within the Planning Area, the data is stored at the lowest level granularity that you maintain in storage bucket profile. Then during display, system will decide what data to show depending on what kind of time bucket profile you use in the planning view, and the time based disaggregation that you maintain for Key Figure.
In this below case, what time characteristic do you have in cube? Is it date, week or month?
If it's date, check how much KF data is maintained on the dates which belong to week which has days both in this month/last month e.g. if I talk about Dec 2011, how much data is stored 1,2,3 & 4 th of Dec, 2011.
This data would appear in Dec in monthly view, but in week, it would appear in the week starting 28th November.
If data is maintained in cube in weeks, then you need to calculate how time based disaggregation would show it to you in months.
If it's months, then you would need to find out how much data would go to the days in the past week of the month.
The time based disaggregation may be causing you some issues, but in that case, I would not expect 30 out of 85 to go in the past week, unless you have data in cube in days.
Data shown in weekly view for week starting 28th Nov should ideally be a small proportion of 85, unless you are using a time stream/fiscal year variant, due to which most of December is in holidays. The only other exception I can think of is that you have data in teh days mentioned above.
It would be best to help the business understand this disaggregation logic, rather than thinking of manipulating the data to shift to a later week.
If this logic doesn't explain your situation, then please provide the date/week/month at which you have data in cube, and what quantity.
Thanks - Pawan

IMPORT LICENSE TRACKING WITH RESPECT TO VALIDATION

Hi Guru's
my clint want to track the lmport license with respect to export license and validity of license.how can it be done plz help.
Thanks,
With Regards.

See this statement:
In Oracle9 and higher, most data is automaticaly
exported in the character set
of the database that is exported. The only
exception to that, is that
data-dictionary information is exported in the
character set that is set in
the NLS_LANG environment variable when making the
export.
In pre-Oracle9 export, ALL data is exported in the
character set that is set
in the NLS_LANG environment variable when making the
export.
This means that if the character set part of the
NLS_LANG environment variable
during export is different than the database
character set, there will be a
automatic conversion between those (for 9i and
higher only for data-dictionary
data since "normal" data is exported in the database
character set, regardless
of the NLS_LANG, as described above).
That means data-dictionary (like package body) uses
NLS_LANG, while data does not.
Thanks for that statement Werner. So in my case, my NLS_LANG parameter on the target server wasn't set up. I think that's my problem. I'm going to do another import and see if it works. Thanks for all the replies.

Dependent AD&D Benefit Insurance Plan

Hello
In AD&D, the employee's can take Life / AD&D insurance for spouse and children.
Here spouse / children are not the beneficiaries, rather they should be insurance holders.
What is the best way to configure it.
Thanks
Raghu

Hello Sarah,
Thanks for clarifying SAP limitation.
Even I tried a lot, but could not find out a way, where employee buys insurance for his dependents.
I tried to use "Relevant Data From" field in for age determination in coverage variant. But that solved half my problem. At least it is not letting me to enroll into spousal insurance without a spouse maintained in IT 0021. That's good.
But SAP gave only 3 options there Employee, Spouse and Dom partner and did not give Child and Child of dom partner. If there is a way to add them, my problem would have been solved to some extent.
I am surprised that SAP did not give a provision to buy insurance coverage for dependents.
Thanks,
Raghu Kolukuluri

How to maintain Quota arrangement with respect to production verson

Hi,
I maintained Quota arrangement(without splitting) with respect to the two different production versions of a material and when i checked by running MRP. quota arrangement is not working. the system allocates the demand only to the active production version(which has the current validity period).
I guess i am missing something, can some one tell me how to maintain the quota arrangement with respect to production versions.
we have a requirement where a material is manufactured in house and will have 2 different production versions with 2 different validity periods in material master and they need the quota arrangement to work on this material in M.R.P for 2 different production versions.
I have maintained the quota arrangement usage= 3 in material master.
Thanks
Mahendra

Hi,
for the req qty to be distributed between two differnt production vesion, you might have to activate splitting in MEq1.
Give the min qty as 1, so that you req qty could be distributed between two differnt production version.
Pls conifm if it is through or if there is any other solution .
regards
Harish

Fetch the netprice from the validity period which always matches with the

Let me describe the same.
Suppose the PO creation date is 04.07.2007
The conditions for an item in a contract for the PO are as follows;
1. Validity from 04.07.2007 validity to 04.07.2007 Netprice = 100.00
2. Validity from 05.07.2007 validity to 31.12.9999 Netprice = 200.00
We need to always fetch the netprice from the validity period which always matches with the PO creation date. here the value 100.00 should be the correct netpr as the PO creation date matches with the first validity period.
But the program is fetching the netprice 200.000 which belongs to the second validity period. That is beacuse the select statement which fetches the data for contracts collects on the basis of EKKO-kdate and ekko-kdtab.the fields kdate and kdtab retrieves the validity period of the contract which is from 04.07.2007 to 31.072007. This data is then used to retrieve the netpr data from EKPO and it fetched 200.00 as it retrives the netprice of current data in contract validity and h not with respect to PO creation date.
This data is then used to fetch the get the netpr data from EKPO.
what we need is the netprice for that validity period of item(Conditions) that matches with the PO creation date..
Below is the code where I'm selecting the data from ekko and ekpo for the contracts data..Can you please add the code snippet to the below attachesd subroutine to get the required data from KONV and KONP so that we can retrieve the correct Netprice.
FORM select_contracts USING p_s_cebeln LIKE s_cebeln[]
p_c_k_bstyp TYPE ebstyp
p_p_bukrs TYPE bukrs
p_p_ekorg TYPE ekorg
p_p_ekgrp TYPE bkgrp
*Begin of Mod-004
fp_p_cernam type ty_r_ernam
p_p_cernam TYPE ernam
*End of Mod-004
p_s_werks LIKE s_werks[]
p_s_matnr LIKE s_matnr[]
p_s_lifnr LIKE s_lifnr[]
p_s_val_dt LIKE s_val_dt[].
*mod-002
data : l_amount type BAPICURR_D, " Net price
l_waers TYPE waers, " Currency Key
l_eff_amount type BAPICURR_D. " Effective value
data: l_v_netpr type bprei.
*mod-002
SELECT ebeln
bukrs
bstyp
aedat
ernam
lifnr
zterm
ekorg
ekgrp
waers
wkurs
kdatb
kdate
inco1
INTO TABLE i_ekko
FROM ekko
WHERE ebeln IN p_s_cebeln
AND bstyp EQ p_c_k_bstyp
AND bukrs EQ p_p_bukrs
AND ekorg EQ p_p_ekorg
AND ekgrp EQ p_p_ekgrp
*Begin of Mod-004
AND ernam EQ p_p_cernam
AND ernam IN fp_p_cernam
*End of Mod-004
AND lifnr IN p_s_lifnr
AND ( kdatb IN p_s_val_dt OR kdate IN p_s_val_dt ).
IF sy-subrc EQ 0.
Populates internal table i_ekpo using EKPO table.
SELECT ebeln
ebelp
loekz
txz01
matnr
werks
ktmng
menge
meins
bprme
netpr
peinh
webaz
mwskz
uebto
untto
erekz
pstyp
knttp
repos
webre
konnr
ktpnr
ean11
effwr
xersy
aedat
prdat
INTO TABLE i_ekpo
FROM ekpo
FOR ALL ENTRIES IN i_ekko
WHERE ebeln = i_ekko-ebeln
and aedat = i_ekko-aedat
AND werks IN p_s_werks
AND matnr IN p_s_matnr.
LOOP AT i_ekpo INTO rec_ekpo.
MOVE rec_ekpo-ebeln TO rec_contr-ebeln.
MOVE rec_ekpo-ebelp TO rec_contr-ebelp.
MOVE rec_ekpo-loekz TO rec_contr-loekz.
MOVE rec_ekpo-txz01 TO rec_contr-txz01.
MOVE rec_ekpo-matnr TO rec_contr-matnr.
MOVE rec_ekpo-werks TO rec_contr-werks.
MOVE rec_ekpo-ktmng TO rec_contr-ktmng.
MOVE rec_ekpo-menge TO rec_contr-menge.
MOVE rec_ekpo-meins TO rec_contr-meins.
MOVE rec_ekpo-bprme TO rec_contr-bprme.
MOVE rec_ekpo-netpr TO rec_contr-netpr.
move l_v_netpr TO rec_contr-netpr.
mod-002
read table i_ekko into rec_ekko with key
ebeln = rec_ekpo-ebeln.
l_waers = rec_ekko-waers.
CALL FUNCTION 'BAPI_CURRENCY_CONV_TO_EXTERNAL'
EXPORTING
currency = l_waers
amount_internal = rec_contr-netpr
IMPORTING
AMOUNT_EXTERNAL = l_amount.
rec_contr-netpr = l_amount.
mod-002
MOVE rec_ekpo-peinh TO rec_contr-peinh.
MOVE rec_ekpo-webaz TO rec_contr-webaz.
MOVE rec_ekpo-mwskz TO rec_contr-mwskz.
MOVE rec_ekpo-uebto TO rec_contr-uebto.
MOVE rec_ekpo-untto TO rec_contr-untto.
MOVE rec_ekpo-erekz TO rec_contr-erekz.
MOVE rec_ekpo-pstyp TO rec_contr-pstyp.
MOVE rec_ekpo-knttp TO rec_contr-knttp.
MOVE rec_ekpo-repos TO rec_contr-repos.
MOVE rec_ekpo-webre TO rec_contr-webre.
MOVE rec_ekpo-konnr TO rec_contr-konnr.
MOVE rec_ekpo-ktpnr TO rec_contr-ktpnr.
MOVE rec_ekpo-ean11 TO rec_contr-ean11.
MOVE rec_ekpo-effwr TO rec_contr-effwr.
mod-002
CALL FUNCTION 'BAPI_CURRENCY_CONV_TO_EXTERNAL'
EXPORTING
currency = l_waers
amount_internal = rec_contr-effwr
IMPORTING
AMOUNT_EXTERNAL = l_eff_amount.
rec_contr-effwr = l_eff_amount.
*mod-002
MOVE rec_ekpo-xersy TO rec_contr-xersy.
APPEND rec_contr TO i_contr.
CLEAR: rec_ekpo,rec_contr.
mod-002
CLEAR : rec_ekko,l_amount, l_eff_amount,l_waers.
mod-002
ENDLOOP.
Modifying i_contr using i_ekko.
SORT i_ekko BY ebeln.
LOOP AT i_contr INTO rec_contr.
READ TABLE i_ekko INTO rec_ekko WITH KEY
ebeln = rec_contr-ebeln
BINARY SEARCH.
MOVE rec_ekko-bukrs TO rec_contr-bukrs.
MOVE rec_ekko-bstyp TO rec_contr-bstyp.
MOVE rec_ekko-aedat TO rec_contr-aedat.
MOVE rec_ekko-ernam TO rec_contr-ernam.
MOVE rec_ekko-lifnr TO rec_contr-lifnr.
MOVE rec_ekko-zterm TO rec_contr-zterm.
MOVE rec_ekko-ekorg TO rec_contr-ekorg.
MOVE rec_ekko-ekgrp TO rec_contr-ekgrp.
MOVE rec_ekko-waers TO rec_contr-waers.
MOVE rec_ekko-wkurs TO rec_contr-wkurs.
MOVE rec_ekko-kdatb TO rec_contr-kdatb.
MOVE rec_ekko-kdate TO rec_contr-kdate.
MOVE rec_ekko-inco1 TO rec_contr-inco1.
MODIFY i_contr FROM rec_contr.
ENDLOOP.
ENDIF.
REFRESH: i_ekko,
i_ekpo.
CLEAR : rec_ekko,
rec_ekpo,
rec_contr.
ENDFORM. "select_contracts
Thanks.

Hi,
Please get the valid condition ( based on date ) from A016 (MK & LPA). With the appropriate KNUMH read the Condition header. You can access the different condition items viz., PB00, RA00 etc., for the values from table KONP. Further if you have Value scales / Quantity scales, you can read the data from KONM, KONW.
An additional tips: in KONP, if you have a condition like RA00 - Rebate, the value will be multiplied by 10 and saven in database to accomodate the discount to the third decimal.
I could not completely understand your requirements like nature of development ( Is it a Report / SAP Script ??) you are working etc., so that I could help you precisely.
Hope this helps,
Best Regards, Murugesh AS
Message was edited by:
Murugesh Arcot

Enrollment Screen - Validity period for benefit plan

Hi,
At the enrollment screen (HRBEN0001), once click the adjustment reason, the respective benefit types and plans will be listed out. Also, the benefit plans have the "Validity period" showing as well (start date and end date).
I understand that the date is configure at "administrative parameter" and the "adjustment reason" . But I needs to have the validity end date of the benefit plan to be displayed (at HRBEN0001) based on the validity period of the plan itself from table (T5UBA). Is it possible to do that?
Thanks
Nikki

Hi Nikki,
In configuration this cannot be done. However there is some badis that allow you to set up plan records date depending of the type of plan. These badis are:
PBEN0038                       Set dates for Spending Account plans
PBEN0039                       Set dates for Miscellaneous plans
PBEN0040                       Set dates for HSA plans
For other plan types I;m afraid only the dates from administrative parameter" and the "adjustment reason" can be used
Hope this help
Sarah

Doubt in customizing request with respect to table entries

Hi All,
I have a doubt in customizing request with respect to table entries.
Suppose I have a customizing request with respect to a table that contains say 10 entries in the development system.
Now I am transporting this request to the quality system in which the same table contains 20 entries.
When I am transporting this table from the development system to the quality system, will my 10 entries in the development system get added to the 20 entries in the quality system or will my table get overwritten in the quality system.
What difference will this be if it is a workbench request ? .
Regards,
Sushanth H.S.

Hello,
So if we are transporting contents of a table from one system to another, it should always be a customizing request and not a workbench request right.
If the "Delivery Class" of the table is 'C'(Customizing table, maintenance only by cust., not SAP import) it will ask for a customizing request.
If it is 'A'(Application table (master and transaction data)), it will ask for Workbench.
To add to your previous qn, when you transport the entries to subsequent system it will always check the KEY FIELDS and then update. If you see a transport, then the table entries are represented by their key fields.
If you create new entries in your table and transport, it will add the records. Else it will modify them
Hope i am clear.
BR,
Suhas
Edited by: Suhas Saha on Jan 23, 2009 11:51 AM

Benefit plan enrollment

Hi All,
Please help me in the following :
As per my Business requirement i need to delimit a Benefit plan becuase that plan is no longer existed in their business effective form 01.01.2009. So as per their requirement i have deleted the master data records existed after 01.01.2009. Now i need to do some functional configuration so that end user will never enter the data for the "Actions" done through PA40.
This plan is not coming any actions performed enrollment. before the changes itseld this plan is not enrolling. i need to show my user that plan is not active in the enrollment for any of the actions through PA40. and note that this is "Default Offer plan".
I can delimit and closed the plan effective form 01.01.2009. Before that i have to make sure that this plan enrollment is possible if plan is
"OPEN".
Can any one help me how can i show this plan into the action.
Thanks & Regards,
Naga

problem solved

Benefit - Question on EOI configuration for Insurance plan

I have a question related to Evidence of Insurability under Insurance Plan.
The requirment is that when an EE enrolls into an Insurance plan within 30days of DOH then EE doesn't need to provide EOI otherwise if EE enrolls into the plan after 30days then its mandatory to provide EOI. Could you please help me on how to set this condition when configuring EOI?
Thanks,
Raj.

Hi DF, Thanks for the comment.
Actually the requirement is, the EOI to be provided by EE is determined by DOH. Under garce period it determines the period when the EE should return EOI.
In our case, the EE don't have the provide EOI when they enroll within 30 days of DOH and they must provide if they enroll after 30days.

How is the Basic Coverage amount calculated in IT0168 for Insurance plans?

Hi All,
I am in the process of configuring benefit plans for IT0168 -GB can anyone of you help me with the below?
How is the basic coverage amount caluclated - can you please advise configuration for the same?
Many thanks in advance.
Regards,
Anjali.

1. Configure the Plan Type for the Insurance Plan.
2. Configure the Insurance Plan
3. Coverage Grouping ( if needed ) - Different coverage based on Employee IT0001 information / IT171 Grouping.
4. Configure the Coverage Variant - If coverage varies by ( Parameter grouping ) Gender, Age, Smoker, Length of Service,
5. Configure the Coverage where one specify the actual cost per unit of coverage ( example 0.25 cents per $ 1000 coverage ).
Path for above items...
Personnel Mgmt ---> Benefits ---> Plans -
> Insurance Plans....

BENEFITS: CLAIMS AND INSURANCE PLANS

Dear Experts.......
Let's say that we have an INSURANCE PLAN in a company and on in one hand I want to watch the receipts and and the bills of the employees...
HOW CAN I COMBINE THE SPECIFIC INSURANCE PLAN WITH THE CLAIMS?..........
Thank you very much!!

I tried it. It throwed an error that table declaration that I had done for infotype 41(PA0041) in the benefit userexit is not applicable. The message was the table has already been declared in ZXBEU20. But if do not declare, my existing code in the benefit userexit does not work.
Also my question is, am I adopting the right approach, because this userexit(in the debug mode) only stops when I am in the benefit infotypes like 167, 168 for an employee. Being in infotype 168, am I able to grab the infotype 41 data for that employee?
Let me know,
Thanks,
VG

I dropped my iPhone 4s and the back cracked and it now will not turn on. I was wondering if anyone could give me an estimated price to fix it. Thanks. And I do have insurance on it with best buy. I'm with Verizon so I don't know what way would be cheaper

I dropped my iPhone 4s and the back cracked and it now will not turn on. I was wondering if anyone could give me an estimated price to fix it. And I do have insurance on it with best buy. I'm on Verizon's phone plan so I don't know if it would be cheaper to have it fixed with Best Buy or Verizon. I cracked my iPod a little bit ago and got a refurbished one for free with the insurance on it but I don't now if it would be different because it is a phone. I don't know really anything about this stuff so any information that could possibly help me is greatly appreciated. Thanks.

That's only for the iPhone 5. On the 4 and 4S, they can repair the back glass in store for $30. They will not replace the display on a 4 or 4S. They must replace the entire phone. Replacing the display on them requires disassembling the entire phone, which they will not do in store.

Doubt in Benefit Insurance plan enrollment with respect to Validity periods

Similar Messages

Maybe you are looking for