DOWNGRADE PLAN + REMOVE LINES--question/help please

On December 17, 2009, I signed up for the Nationwide Talk & Text 700 Plan; I have my 1 phone, plus 2 additional phones on this contract/plan (this is a TWO YEAR contract, with contract end date of December 17, 2011).
On July 27, 2011, I broke my phone and had to purchase a new one (no issues/changes with the other 2 phones). So now, the contract end date on my 1 new phone is July 27, 2013.
On December 17, 2011, I would like to KEEP my 1 phone, but get rid of the 2 additional phones I have on my plan. THEN, I want to change my plan to an individual, single-line plan.
Will Verizon let me do this? Will I have to pay a penalty? I'm a little bit confused about my contract end date since I purchased a new phone before my original contract end date.
Also, will the people that currently have the phone numbers for the 2 lines that I'm about to drop off my account, be able to keep those phone numbers? I don't think they plan on staying with Verizon Wireless when they go to get their own calling plans.
Thanks,
Marie

They can transfer their lines when the contract expires and you won't have a penalty. If you do it before the contract expires then there will be an ETF. You can switch to a normal plan from a family plan without any costs to you.

Similar Messages

New/Additional phone line question- help please!

Hi
I am after some advice, and every time I call BT I get passed around as I am not 100% on what to ask for, or who I should speak to.
Basically, we have 2 phone lines coming into the house. One line/number + broadband signal goes via a repeater to the office which is a separate building across the garden (approx 300m but I am not sure on the actual distance). The signal is not great, for the broadband particularly - often drops out etc. To solve this we would like a new physical line installed in the office building to give us a separate phone and broadband package to that of the main house, but ideally keeping the same number as we currently use in the office. The office is used everyday for working from home and so is important to us.
Does that make sense? I fully expect that an engineer will need to look at the site, and there will be a (significant) charge for the line to be installed (underground pipe work for cables already exists from house to office building and so this could be utilised). Do I just place an order for a new line online, and wait for an engineer's visit? Can I deal with changing the number at a later date if that is easier for the system to deal with? Last time I rang BT, I was told I needed to speak to the exceptions team, when I was put through to them she told me all I needed to do was speak to customer services, customer services thought I was trying to move home and then didn't seem to understand what I needed (but it was probably how I was explaining it!).
I would be so grateful if someone could point me in the right direction, or give me tips on what to ask for. My main worry is keeping the same phone number as it would be so much easier.
Thanks in advance
MPA

this link may help http://www.openreach.co.uk/orpg/home/network/whoareyou/selfbuild/selfbuild.do
If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

I have a black window that keeps coming up and telling me the various tasks that I am handeling. It came after opening a power point and now I cannot make it disappear. It frames all windows and programs that I open with a black line. Help please...

I have a black window that keeps coming up and telling me the various tasks that I am handeling. It came after opening a power point and now I cannot make it disappear. It frames all windows and programs that I open with a black line. Help please...

Go to System Preferences - Accessibility - Voiceover - turn off Voiceover. The shortcut is command-F5, so possibly you pressed that accidentally.
Matt

Possible line problems - Help Please?

Good Morning,
Been having a lot of problems with slow speeds and the Hub disconnecting recently. I suspect this is to do with the phone line as my setup has not changed since previous issues I had with internal wiring which I fixed with help from people on here...
Anyway, my Hub is connected directly into the test socket and my stats are as below. This doesn't seem right. My noise margin seems very low and the number of errors and events seem rather high. My IP profile has been higher in the past and stable until a few weeks ago.
I realise the connection is not 'stable' as it's been less than three to five days - I'm struggling to keep a connection for 24 to 48 hours at the moment without a reset so this is good for now!
Any help from Mods or others much appreciated. Not much I can do at this end.
Thanks,
Dan.
ADSL Line Status
Connection Information
Line state: Connectedppp0_0
Connection time: 2 days, 08:27:20
Downstream: 2.188 Mbps
Upstream: 448 Kbps
ADSL Settings
VPI/VCI: 0/38
Type: PPPoA
Modulation: G.992.1 Annex A
Latency type: Interleaved
Noise margin (Down/Up): 2.5 dB / 20.0 dB
Line attenuation (Down/Up): 61.8 dB / 31.5 dB
Output power (Down/Up): 17.7 dBm / 12.3 dBm
FEC Events (Down/Up): 178731265 / 1208
CRC Events (Down/Up): 288943 / 1108
Loss of Framing (Local/Remote): 0 / 0
Loss of Signal (Local/Remote): 0 / 0
Loss of Power (Local/Remote): 0 / 0
HEC Events (Down/Up): 418976 / 3497
Error Seconds (Local/Remote): 38442 / 1298
Download speed achieved during the test was - 1.6 Mbps
For your connection, the acceptable range of speeds is 0.4 Mbps-2 Mbps.
Additional Information:
Your DSL Connection Rate :2.24 Mbps(DOWN-STREAM), 0.45 Mbps(UP-STREAM)
IP Profile for your line is - 1.75 Mbps

as you are in the test socket already are you using a new filter? tried changing the modem rj11 cable? do you use a phone extension cable to connect to test socket?
check this post for other ideas uk sales 08007830056
http://community.bt.com/t5/BB-in-Home/Poor-Broadband-speed/m-p/14217#M8397
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

Simple java question, help please

please help
-i am just starting out in java and im havin an early problem. Im trying to run a small java script from a commant prompt but im getting the following error after i enter this command at my prompt
c:\javatest>javac HelloARP.java
javac is not as an internal or external command, operable program or batch file.
when i enter
c:\java -version
i get the following message: registry key software\javasoft\java runtime enviornment\current version has value of 1.1 but 1.4 is requiured
error: could not find java.dll
error: could not find java 2 runtime enviornment
-im sure this is a simple error on my part. all im trying to do is run my first lil program that i saved in notepad, its only 5 lines long. here is the lil test program im trying to execute
class HelloARP {
public static void main (String[] arguments) {
System.out.println("What's good ARP?");
- all responses and help are welcomed. Thank you ahead of time for anyone that can help me get started.

Hi
First of all uninstall your current JDK installation, if you can get to the registry delete the registry entries for the old version of java which was there on your machine.
Now do a fresh install of your j2sdk1.4.1, make sure that you will install the JRE with the J2SDK1.4.1.
Once you are done, set your classpath in autoexec.bat if you are using Windows 95/98
or set your environment variables if you are using Win NT/2000/XP.
If using solaris or other unix flavors see the included installation instructions provided.
Let me if you face the same problem.
Thanks
Swaraj

Some start up questions (help please)

Hello everyone. My name is Tom and its very nice to meet everyone.
I have been, historically, using harware sequencers for my music (Korg M series, Korg O series, and most recently a Fantom X7).
I have decided that I want to go the DAW route for my music for various reasons. At any rate here is what I'll be ordering next week....
MacBookPro 2Ghz 15" (1 gig of ram to start 2x 512)
Logic Pro
M-Audio Keystation Pro 88 (my main instrument is piano)
M-Audio Oxygen 8 v2 (I'll use this for synth sounds, strings, brass, triggers, etc)
Presonus Firebox (portability)
SIIG FireWire 800 1-Port ExpressCard/34 (the MBP only has 1 Firewire port)
My Book Pro Edition 500 GB Ext HD (will connect to the FW 800 expresscard)
Pair of Behringer Truths B2031a (I listened to these in a local store and I was really impressed.)
I have various other instruments that I will use (guitars, bass, steel, etc) during recording but those arent the focus of these questions.
To the point...
1. Should I connect both Midi In and Out for the Keystation Pro?? (The midi thing is somewhat new since I'm coming from the hw sequencers and I never midi'd my boards together) I understand that I'll go from the midi out to the s/pdif cable in but will it be necessary for information to be returned to the ks pro?
2. On the Presonus Firebox, is the s/pdif cable included with the interface??
3. Any general impressions with my initial setup?? Please keep in mind that I will do all the music by myself... one track and one instrument at a time. (Which is why I thought the firebox would be sufficient for my needs) Any concerns with my ideas for setting it up?? KS Pro midi'd to presonus. presonus FW 400 to Mac. Oxygen 8 USB'd to Mac. My Book hard drive FW 800 through expresscard expansion. Will I have any compatibility issues or conflicts?
Thanks so very much for any help and guidance.
Tom

Hi Tom
Welcome to the forum!
1) your keystation and Oxygen 8 will send and receive midi to Logic thru your usb connection. You can connect any other midi devices thru the keystation or using the Oxygen or Firebox midi ins & outs. Logic will recognize all of your midi connections. you just need to assign which midi keyboard or other outboard device is connected to which midi port in Logic's environment
2) yes the spdif cable is included
3) Your setup sounds nice. I personally don't like the firebox, I had one for a short time and got rid of it, but I know a few guys here use one and like them.
Have fun
Don

Memory Question Help Please

Alright ive never really been to smart on memory and how it runs and all that. The Question is I have a gig of ram on my mac book but right now it says only 30 mb is free
wired: 221mb
active: 524mb
inactive: 247 mb
used: 993mb
now is that normal cause i mean im hardly using anything im using like safari, aim, and itunes. seems like more memory should be free and crap.

Hi,
here is link toe help you understand better:
http://docs.info.apple.com/article.html?artnum=107918
Good Luck

IPAD and UPdate to Airprint Printer question Help Please?

I have an HP 6500 printer that I utilize with my MacbookPro (from 2007) and it operates just fine wirelessly using WiFi at home. I did note though that my iPod cannot print to the printer as the printer IS NOT AIRPRINT equipped.
MY QUESTION?
I am considering purchasing an IPAD MINI (RETINA)equipped with KeyNote, Pages, etc., and am wondering If I invest in an AIRPRINT equipped printer in order to enable printing from the IPAD MINI, will I also still be able to print from my Macbook Pro (2007) which is not equipped with anything that interfaces with AIRPRINT to my new AIRPRINT printer? In other words, is this reversed engineered to allow printing from an older laptop to a brand new AIRPRINT printer?
Hope you can help, so I don't waste money on a new printer and an IPAD only to find out I can no longer use my LapTop (MacbookPro) to print.
Thanks you for any help.
Charles

Thanks, Jim.
Going to give it a try, Now, after reading all the reviews on the various HP and Epson model all-in-one printers, my next chore will be to make the actual selection. It seems that there as many people who love each unit as there are who hate each unit. Confusing, but I will digest it over the next several days and make a choice.
Thanks again,
Charles

Line chart - help please

Hi,
I have a line chart that shows project gate based on the date.
1)Is it possible to give same color for the project gates?
(p-12 Gate4,p-12 Gate5)
2)Is it possible to change legend shapes for different project gate in crystal reports (manually i am able to do)?
Any suggestions please.
Thanks,
Madhuri
Edited by: B Madhuri on Jul 18, 2008 1:46 PM

Hi,
Thanks for the suggestion.
Manually i was able to address these points.
1)Change the line color
2)Legend shape changing
I want to know whether any option is there to do automatically.
Thanks,
Madhuri

Cancelled phone line order help please

Where do I start.
I ordered telephone broadband and vision on the 4 october was told it would be installed on 28 october but nothing so rang customer services and was told it had been cancelled and would be reordered and I would recive a phone call on the 29th oct, nothing so rang again saturday morning.
I was put through to 3 different departments and gagain was told it was cancelled and to be told again it would be reordered and I would get a call by monday 1st november.
As you guessed nothing until I emailed customer services got a call saying the samething yet again.
After some more toing and frowing I have a call today telling me I have to re-place the order and was offered to be put through to sales and then cut off. I have spent so much time on my mobile I cant ring back as I have no more credit.
The best thing is on my so called activation date all the relevant equipment was deleverd and my next door nabour ordered there line a week after me and installed brfore me.
Not even a reason given as to why it was cancelled
Im loosing the plot not.
Please can anyone help

Hi Slimmy5656,
Thanks for the posts and welcome to the forum. I am sorry for the confusion BT have caused with your order.
I agree with Hamish on this one, please drop us an email so that we check the order to find out what is going on.
Cheers
Sean
BTCare Community Manager
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry that we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)

When I Tick Convert higher bit rate songs to 128kbps and press sync it says are you sure you want to remove apps. Help please

Hi, I recently put music on my ipad (manually, I do not sync because I dont like leaving music in my itunes) I realised they take up a lot of space because of the bit rate so I went into iTunes and pressed "Convert higher bit rate songs to 128 kbps AAC" Then I pressed apply and I got the message "Are you sure you want to remover 113 apps......." I have checked and sync Apps is unticked so my question is why does it say this and is there a way around it. Also if i tick convert to AAC will it convert the songs already on my ipad or just ones I add from now on.

SeasiderChris wrote:
Hi, I recently put music on my ipad (manually, I do not sync because I dont like leaving music in my itunes
Why not? That's what it is for.
So Restoring your iPad when it crashes and losing all your music is acceptable to you?
Then I pressed apply and I got the message "Are you sure you want to remover 113 apps......." I have checked and sync Apps is unticked so my question is why does it say this and is there a way around it.
Since you now want to sync the iPad and have told it you do not want to sync apps, it will remove them all.
Check the apps you want on the iPad.
Also if i tick convert to AAC will it convert the songs already on my ipad or just ones I add from now on.
It will only convert new songs added to the iPad.

CS3 Questions, Help please?

I've been gone for a while and I used to know this stuff backwards and forwards. Now that I have come back, I just can't seem to remember some things re. InDesign and shortcuts and keys. I've tried going to help but these don't come up in help and I did not get a book with CS3. I set my shortcut prefs to shortcuts for Quark 4 as in past.
1. Is there a way to get the display preference to default to high quality display so it is there all the time?
2. Where is the default for copy and then the paste going in front instead of pasting in back.
3. I can use my shift/command/> to increase font size (and where is the preference for changing it by 1 point instead of 2 please) but the shift/command/< is not working at all.
4. I have some documents that when I try to increase the leading by 1 point, the leading is increasing drastically almost as if there is a lock to some grid on but all the lock to grids and lock to baseline are not selected. I don't know who created these documents but I cannot find where they appear to be locked to grids. Any ideas.
Thank you in advance for any help. I've been going thru tutorials but can't find the answers to these and I used to know these so well.

Ann, I responded to your other query too, but are you sure you don't have "Paste Remembers Layers" turned on? If stuff you copy is on a layer that is behind something else, it will still be behind it after pasting because it will paste to the layer behind.
Check your Layers flyout menu to see if this is the case.

Newbie audio question--help please...

I recently recorded/captured video from Canon HV30 and unfortunately found that only Left audio channel was recorded..Right channel in non-existant. How do I duplicate the audio track from Left to Right so that both tracks are played in sync?
I appreciate your help on this newbie question!

When the left channel is filled you use the Fill Left effect
The Fill Left effect duplicates the left channel information of the audio clip and places it in the right channel, discarding the original clip’s right channel information.
Instead of putting the effect on each clip use the Audio Mixer.

Powerbook G4 acting funky: possibly from device removal...HELP PLEASE!

Hello. My computer has been behaving strangely and not working properly; mainly, I have a constant spinning beach ball...even with no other programs open. Basically my computer just locks up with the spinning beach ball whenever I try to do anything at all (double-clicking, typing in a field, etc.). I think it may have started when I prematurely removed my camera while uploading photos to IPhoto.
It has become so bad that my computer won't even start up. When I boot up, it acts like it's trying to start (shows the apple screen for a minute or so) then just shuts off.
(On a side note, my battery is so bad it doesn't even hold a charge at all...I have to always have my power adapter plugged in to use the computer. Don't know if this is a factor or not.)
Anyway, I've run the Apple Hardware test with the Mac OS X Install disc and the hardware test came out fine...everything passed. Then I tried rebooting while holding C, choosing Disc Utilities, and repairing disk. This is the message I received:
First Aid Failed:
Error: The underlying task reported failure on exit (-9972)
Repair attempted on 1 volume
0 HFS volumes repaired
1 volume could not be repaired
What can I do from here? Any help in this matter would be greatly appreciated! Thanks!

Error: The underlying task reported failure on exit (-9972)
This means that you have an issue with your hard drive that Disk Utility cannot repair. The next step many take is to use either Disk Warrior, which seems to be the preferred software solution, or TechTool Pro (if you have TechTool Deluxe from Applecare, you can get a discounted upgrade to TechTool Pro).
When you used Disk Utility from the OS X DVD, did you notice what it said at the bottom of the screen for SMART status? If it's anything but 'verified' then you have hardware issues with the drive.
If one of those programs can't repair the disk, then you need to replace the hard drive, as it has issues that can't be fixed. Some have tried to erase and write zero's to the hard drive, however, this 'fix' may not last long.
If you're able to run it, a program like Smart Utility from http://www.volitans-software.com/smart_utility.php is useful to read the SMART indicators on the hard drive, which can give you good information on the health of the drive.

Sound Blaster Z headphone gain and other questions, Help Please

Hello all, I recently installed a Sound Blaster Z on my msi z77a-gd65 board running windows 8.1 and using the latest driver.
I want to use the sound card for gaming via my headphones, but am running into several issues.
1.The first is that it appears that my Headphone gain is set to high. I cannot set lower volumes correctly via headphone as it appears to go from very quiet to very loud and its only on 10 in windows. Ive looked through the Sound blaster control panel but have not found a setting to remedy this.
Any help or tips with this problem will be appreciated.
2.Also I use TeamSpeak 3 while gaming and it appears the surround effects are being applied to this voip program making people very difficult to hear.
Is there a setting or a way to avoid this?
3. Since I have to setup my speakers to 5.1 surround for the surround effects to take while in headphone the problem arises that while im back using the desktop speakers I will have to set the speakers back to stereo to get proper sound.
Is there a way around this?
Any help with any of these issues woukd be greatly appreciated.
Thanks to all.

Originally Posted by Anarion
This card is loud as hell. I have to use line out at 10% and then use ACM at around 66% if I want to keep my hearing. Headphone out is basically unusable. What makes this annoying is that they do no allow putting card in headphone mode and output the sound through line out so I can't use headphone mode but I'm still using headphones.
You haven't found a way to change this?
The sad part is that I really like the sound it makes through my headphones, its just to ****ed loud. Its really defeating the whole porpoise of purchasing tis audio card in the first place.

DOWNGRADE PLAN + REMOVE LINES--question/help please

Similar Messages

Maybe you are looking for