Downloading and surfing
i am downloading songs directly from the iTunes on the iPhone...can i use safari at the same time or does it pause the download?...i have an original iPhone
Once you start Safari the iTunes application closes and downloading stops. It should resume downloading when you start the iTunes app again.
Message was edited by: dmiannay
Similar Messages
-
DNS trouble downloading and surfing
Hi.
I got somewhat of a problem when surfing on the web, and downloading, while using my 5800 XM as a modem.
After sometime surfing the web, my connection dies out, and same goes for downloads when i hit, blah, just 15-20MB, forcing me to disconnect, and reconnect again.
I have tried using the OpenDNS (208.67.222.222 / 208.67.220.220) on my phone, but also the automatic (0.0.0.0 / 0.0.0.0), and i keep hitting the same wall over and over.
Even with the newest version of PC Suite, the problem stays.
I dunno if its because i use Windows 7, but i certainly didnt have this kind of trouble when i Windows XP.
And its only when i use the phone as modem, as i dont have the same problems downloading and surfing the web, with only my phone.
Any help please ?A "waiting" app seems to be relatively common and I have not heard of a way of preventing it. To get rid of "waiting" one of the following usually woks:
- sign out and back in in iTunes
- Powering off and then back on your Ipod
- resetting your iPod
Press and hold the On/Off Sleep/Wake button and the Home
button at the same time for at least ten seconds, until the Apple logo appears. -
My browser was very slow, so I cleared cookies and cache. When FF (4.0) restarted, it said it had installed colourful tabs (which I ALREADY HAD). I opened FF and typed in mmy first TE on my list ( I surf traffic exchanges). But I cannot do so on FF anymore. Only half my computer screen is from the TE or web page, and the bottom HALF of the screen is for History, etc. I cannot even see or access the Start menu or my open tabs at the bottom of the screen, unless I use Control and Escape.
I got the url from FF 4.0 , uninstalled the old version and reinstalled it. Same thing. I uninstalled it again, straight from my control panel (Windows Vista Home Premium), cleared cookies and cache again, fixed registry problems again, and restarted my computer. STILL same thing!
I tried to adjust settings, but it will not let me change what I need to. I cannot unclick that updates will be downloaded and installed automatically, and check that I want to be asked each time. I do not know if I can even SEE what was updated, to give you an idea if that could have caused this very nasty problem. Nasty, because until it is fixed, I will not be using FF.After following all the instructions given, I poked around safe websites as suggested. I am not sure why this step was needed, as websites functioned rather normally before I came here but I did it anyways and found that the websites still work the same as they did. I can still do everything I used to be able to do. I see no change in the function of the websites.
However, I still cannot resize, close, or move the browser window. I don't know if Netflix is a safe site or not (too many conflicting opinions on that one from the masses) so I don't know if the issue with the vanishing buttons is still there, but all the issues I had with the browser window itself is still there.
Even in safe mode the browsers three window control buttons on the top right refuse to let me use them and the window itself will refuse to be moved around. -
Lion upgrade prohibits second i-Mac machine from downloading email and surfing the net???
I upgraded to Lion this evening, trusting that that all the updates would have resolved the wireless connection problem i had when upgrading to Lion 2 months back. No hope, both my I-Macs can see one another and i can share files across the two of them. My main Mac connects to the Internet by Wireless Modem; this modem is attached to my mac by Ethernet cable. My second Mac could connect to my main Mac and use the Internet connection to download email and surf the net.
Now i have upgraded to Lion on my main machine, but the same problem occurs, my second machine can connect with Wi-Fi to my main machine but cannot get access to the net or download, and this was working fine until i upgraded from Leopard to Lion.
I have created a new network, unpluged the modem, switched on again,tried everything i could find in the forums, but i still cannot connect to the net on my second machine.
Please help, unfortunately Apple support in Africa is not very helpfull.MichaelTree wrote:
I upgraded to Lion this evening, trusting that that all the updates would have resolved the wireless connection problem i had when upgrading to Lion 2 months back. No hope, both my I-Macs can see one another and i can share files across the two of them. My main Mac connects to the Internet by Wireless Modem; this modem is attached to my mac by Ethernet cable. My second Mac could connect to my main Mac and use the Internet connection to download email and surf the net.
Now i have upgraded to Lion on my main machine, but the same problem occurs, my second machine can connect with Wi-Fi to my main machine but cannot get access to the net or download, and this was working fine until i upgraded from Leopard to Lion.
I have created a new network, unpluged the modem, switched on again,tried everything i could find in the forums, but i still cannot connect to the net on my second machine.
Please help, unfortunately Apple support in Africa is not very helpfull.
So you're not using a wireless connection for your main Mac? Is that correct?
If I understand correctly, your main Mac is connected to the router via an Ethernet cable, and your 'second' Mac is connected to your 'main' mac wirelessly. is that correct?
If so, why not connect the 2nd Mac wirelessly direct to your router? -
Problem uzbl and surf downloading files
I have problems when I download files, for example subtitles, instead of .zip it download a ***.aspx and with megaupload account happen too, this not happens with dwb.
Any idea?
Last edited by darroyX (2010-07-25 23:27:37)Ummm ... That's weird, I could swear I could download that file but now somehow I can't ...
Sorry, it seems that uzbl, jumanji and surf have a problem but Chromium can download that damn file.
You know what the really funny thing is? When you click 'Download subtitle' another text appears below: 'Download problems?' - right? Well, it should read 'Download problems? Click here' - the 'click here' part is a link to an 'Alternative download page' with a direct download. The 'click here' part doesn't appear in Chromium, but that browser can download the zip so it doesn't need it.
I get the following info:
--2010-07-26 16:44:46-- ftp://javascript/DownloadSubtitle();
=> `DownloadSubtitle()'
Resolving javascript... failed: Name or service not known.
wget: unable to resolve host address `javascript' -
Iphone 6 app store slow download and update over wifi
Just recently noticed, my iphone 6 app store takes more than 20 min to update and download apps with wifi. With my carrier's LTE downloads and updates are fine. I've done speed tests as well on my iphone using home wifi, with good results. Surfing the net, and using other apps using home wifi works fine as well. App store downloads and updates are my only problem. Tried doing resets to no avail.
Anyone else experiencing this problem?I'm having the exact same issue as you described on my iPhone 6 and iPad Air 2.
-
How can I download and install CS3?
how to download and installing cs3 ?
here are all the steps after click the link in message 1:
Adobe recommends temporarily turning off any surfing restrictions you might have running, like site or cookie blocking, filtering, firewalls or antivirus software.
Click «HERE» to visit this page and then select the “Download Now” button at the bottom.
If asked, then sign in with your Adobe ID or take a minute to create one for yourself.
Now close or cancel any windows that may pop up.
OK, now you’re logged in at Adobe with the trials cookie set, so you can instantly download any of the software below. Just make sure you have enough disk space.
Download the files either by clicking directly on the DDL links, or by right-clicking and choosing “Save Link As…” on the popup menu – and save all files to the same place.
Then follow the product installation instructions here. -
I installed iTunes 10.2.2. When I tried to open it, I got the message that iTunes needs to install Rosetta to open. It then appeared to download and and install Rosetta. When I try to open iTunes, the icon bounces but iTunes does not open. The icon has also changed from the usual iTunes icon. What do I do now?
I have a 2010 MBP15 which I do not use as much as my pc. When I do, I check for updates and I believe I updated iTunes to 10.2.2 a week or so ago. Since I still use iTunes primarily on my pc, I didn't bother firing up the updated iTunes on the mac.
Last week, when I actually started iTunes on the mac, I got the message that Rosetta needed to be installed. Like abefighter I stalled. I surfed the net, read this thread to get some hints as to w** was going on.
When I checked the system profile in the mac, I think it showed PowerPC for 'kind.' Surfing the Internet I found out Rosetta was something needed to help applications work on PowerPCs. But wait, since this MBP is an Intel, why would or should it be asking me for some stone-age plug-in that was never mentioned in all the previous updates for iTunes until now? Fyi, the iTunes icon on the dock had changed to what I think is an AppleWorks icon.
So, I assumed that the update that resulted in my mac was corrupted. At first I scoured for 10.2.1, thinking that the last version was a dud, but in vain, nowhere to be found. I gave up and settled for a fresh 10.2.2. I did a casual delete, without touching any of the related personal preference files in my folder and it now which works fine. I'm glad I didn't jump to install Rosetta; I read elsewhere about someone who actually went through with the Rosetta install that resulted unhappily.
Unless the mac in question is a PowerPC, I would doubt the need for Rosetta installation. -
Slow iPlayer downloads and problem streaming
I bought a iPad 4 largely to use to surf the web and to download and stream from iplayer and itv player then broadcast to Apple TV via Airplay.
It has always been painfully slow trying to stream with lots of stuttering but it did work and downloads were OK - I could download 3 or 4 programs in an evening while web surfing. We recently upgraded our internet to 20MB/s and upgraded to iOS7 thinking that would fix it - it's now got worse!
Speedtest shows that I have a download speed around 4.3 to 4.8 MB/s - which is pretty similar to the speed on my boyfriends MacBook Pro over the same network.
However, the effective speed I get is more like <0.1 to max 1MB/s when downloading from iPlayer and it won't stream at all, buffers all the time and is totally pixilated. In contrast my boyfriends MacBook plays beautiful high res videos from the same site with no problem. We use a DNS service as we live in Malaysia but my boyfriend is using the same DNS on the same WiFi network through the same router with no problems. Trying to download a program it will start to count down time then jump up, then down a bit, then way up, mess around for a while then just sit at 'more than 3 hours' for the night
Being in Malaysia I am usually trying to load in UK mid-morning, which I wouldn't have expected to be the most peak time.
We have changed the route settings to disable QoS and MVV as suggested on here with no effect.
It's not in a case and I have it propped up near the router to try minimise any blockage of the signal.
Any ideas for why the iPad should be so much drastically slower at downloading and unable to stream (same problem with ITV player, no difference between using the Apps and the website) ? Any suggestions to fix?I got same issue. any other solution to fix it . The advice solution is in vain. thx!
Issues:
While download programs, it began fast then slowly sometimes stop. The remaining timing will change from 2 min. to 1 hours.
My ISP is ok with 100MB . Anyone encounter the issues. thx
IPAD2
IOS8
Note: I install the BBC iplayer app on my smartphone with no issues. I also try to un/install the APP, but it is in vain.
thx! -
Reported problem:
During voice conversation, speed of simultaneous internet connect drops to below 1Mpbs downlink and below 0.1Mbps uplink.
Location of problem:
My residence, as well as outside of house, approx 1 mile to the South.
User equipment:
iPhone5, Version 6.1.4(10B350), Carrier AT&T 14.2, Model MD635LL/A, Modem firmware 3.04.25
Same problem observed on both my wife's and my iphone5. Both units were purchased brand new, only by us, no hard falls, protected by shell case.
Reproducibility:
Every time voice call is on going, internet speed drops to >1Mbps downlink and >0.1Mbps uplink.
App used to determine internet speed: OOKLA Speedtest.net, and RootmetricsCoverageMap.
Extreme internet slowness shown every time voice call is on going.
If voice call is not on going at time of speed test, observed speed:
LTE turned off, antenna shows -85db AT&T 4G
ping = 56ms
download = 3.37 Mbps
upload = 2.67 Mbps
Ookla Speedtest app, v3.1
If LTE is turned on,
antenna shows -94db AT&T LTE
ping = 44ms
download = 23.03Mbps
upload = 10.08Mbps
Same app, Ookla Speedtest app, v3.1
Date and time of test: 8/26/2013 4:30-4:33PM US Central
4:36PM. Voice call established from my iphone5 to my home Vonage VoIP phone.
antenna shows -83db AT&T 4G
Ookla Speedtest app shows:
ping = 411ms
download = 1.21Mbps
upload = 0.09Mbps
Hang up call, antenna switches to -93db AT&T LTE,
Re-ran speed test,
ping = 50 ms
download = 21.59 Mbps
upload = 7.12 Mbps
Desstination server remained constant throughout all these tests: Comcast, Chicago IL.
Origination of tests: Suburb of Chicago, stationary, in residence, 2nd floow, did not change phone orientation in between tests.
Facts known to myself:
LTE is currently data only, so whenever voice calls are attempted, at&t uses the CSFB approach.
The call is handed over to another UMTS cell, which ought to be able to handle simultaneous voice and packet calls.
One would think that when we turn off LTE and see 4G, we'd be served by a nearby base station, call it BaseStation_1.
Now when we have a simultaneous voice and data call, I had expected to be served by the same BaseStation_1 that I had attached to when my iphone5's LTE is turned off.
I also assumed that if I get 3.37Mbps/2.67Mpbs when I'm doing a packet only session (LTE disabled, attached to 4G), that when I tack on a voice call, there ought to be less to no degradation in packet transmission speeds.
Why do I make such assumptions? Because of at&t's marketing selling point for going with this carrier:
That even though Verizon may currently have more LTE market coverage, at&t has HSPA+ nationwide to augment its LTE. When Verizon/Sprint iphone5 users step out of LTE coverage, their data speeds would drop down to the slower 1xRTT/EvDO; whereas at&t users stepping out of LTE coverage would get the faster HSPA+.
Talk and Surf : UMTS allows simultaneous voice and packet calls, not CDMA.
One would think it goes without saying that such "simultaneous" data transmission would be of sufficient speeds. Even if the bench mark speeds may not be so high, at least the human persceived network response time has to be accetable.
However, I think somewhere along the line, something like talk and surf fell through the cracks: that areas equipped with LTE base stations probably would have the HSPA+ equipment redeployed elsewhere.
I say "probably" because there is no way for me to know. at&t may also have left those HSPA+ equipment in place and not moved them.
My only regret is that I had not run speed tests back in Dec 2012 when I first got the iphone5. When I tested talk and surf back then, and the surf seemed responsive enough. Now, the "surf" when "talk" is going on feels so slow, and that was what prompted running speedtests.
Surf and talk still works, but the slow down during a talk session has gotten to be irritatingly noticeble.
I have tried resetting the iphone, resetting network, using cases with different materials, but since the other iphone5 in the house shows the same packet slowdown during a voice call, it's probably due to at&t's 3G packet bandwidth.I have not called at&t technical support, because since posting here I've read more previous postings on this subject: there has been quite a few people reporting this problem since Sept 2012 even, and not one single post shows an answer. Some folks were told to go to Apple, some were told to get a new sim. I did not see any threads culminating in a working solution.
Guess I will call at&t when I have some time to burn, because this is going to be a very lengthy process.
I just tried testing talk and surf again, this time with iphone field test mode (*3001#12345#*) turned off. It seems that when the voice call is going on, and we just look up businesses using Yelp or Map, the speed, while slow, at least doesn't stall out (current time is 9:58PM Central, lower traffic).
Once I launch RootMetrics CoverageMap: downlink is less than 1Mbps and uplink reads zero.
If I repeat the test, I'd get similar results.
If I run Speedtest, on the first run the downlink is less than 1Mbps, uplink is less than 0.01Mbps.
If I run Speedtest a 2nd time, the test will stall and return a failure.
And then after this stall, all internet sessions appear to be stalled. Safari page loads stop progressing, Yelp searches would time out.
Speedtest's benchmark appeared to have done some damage to the data pipe.
On my most recent test call (iphone field mode turned back on again), I started out with:
Wifi disabled
LTE enabled (-92 db LTE, 4 bars)
Iphone call out to an VoIP phone (switches to -82db 4G)
This time, I did not launch Speedtest or CoverageMap, and only launched Maps, Yelp, AppStore.
Maps and Yelp response time while not that great, but at least responds to restaurant searches within 10 to 15 secs.
I punched in a random food type, Yelp returns within 15 secs with nearby restaurants. Then if I click on "directions", it'll launch Maps and draw out routes in about 20 secs.
App Store is slower to display graphics.
Next I launched Safari, punched in http://cnn.com.
Main page took about 15 to 20 seconds to finish loading.
The main lesson for me from tonight's testing is, as long as I don't run Speedtest speed benchmarks, talk and surf would work, just not as fast as we'd like. However, after Speedtest is run, even for 1 single time, subsequent attempts to load pages on Safari, Yelp searches, would result in a stall.
Hang up voice call, reload cnn.com page, page load is very snappy, as packet call has already handed over to LTE.
Make another voice call to same VoIP number, iphone5 switched to 4G, Safari page loading now resumes again, no more stalls.
So it does appear that the Speedtest app v3.1's benchmark some how "ruins" the UMTS data pipe, causing apparent stalls in subsequent packet transmission. If the benchmark is not run, simultaneous voice and data is possible, but the internet response time does "feel" faster later in the evening when traffic is lower.
This fallback to UMTS for voice and data is not a long term solution, and I look forward to the industry's deployment of VoLTE. -
Why does my app store use a different account for downloading and another for updating apps?
My app store used my own account for downloading and my sister's for updating, and it keeps telling me to reset my account. I already did that the other few times it told me to do that!
Have you restored your device from your sister's backup?
-
My new iPod touch 64 Gig has a problem after syncing with iTunes. My purchased apps no longer work. I touch them and they seem to try to open but they do not.
The only way I have found to fix this is as follows:
I delete one of the purchased apps. Then I go to the App Store and re-download and install the same app. After that, all my apps work again.
Please help.Download/install an app is a know possible solution.
3. Install another app from the App Store
If all user-installed apps are not launching, it could be an Apple ID authorization issue. Download and install an app that isn't already installed on your device to reset this information.
Note: If you have installed apps using multiple Apple ID accounts, you may need to perform this step for each account.
Above from Apple's :
iOS: Troubleshooting applications purchased from the App Store -
I am short with C: Drive space. Cannont Install Ai Trial. How I can download and Install on other than C: drive? I am trying to download it through Creative Cloud as a subscriber.
Thanks for help. It worked. Now up and running Ai.
Sent by:
Khalid Hameed
London - UK -
Hi,
The operation system for my computer is Window 8.1. I am currently trying to install a chinese game. Even though I have downloaded and install all the chinese language pack, I have even set the regional language locale to chinese (similified / traditional),
the chinese characters will not display properly in the game. Some people told me i need to set the locale to Chinese PRC, but I am not sure where to download this PRC language pack for window 8.1 (as I only have chinese simplified and chinese traditional).
I would greatly appreciate if someone can give me a hand in solving this problem. Thank you for your help in advance.Hi,
The operation system for my computer is Window 8.1. I am currently trying to install a chinese game. Even though I have downloaded and install all the chinese language pack, I have even set the regional language locale to chinese (similified / traditional),
the chinese characters will not display properly in the game. Some people told me i need to set the locale to Chinese PRC, but I am not sure where to download this PRC language pack for window 8.1 (as I only have chinese simplified and chinese traditional).
I would greatly appreciate if someone can give me a hand in solving this problem. Thank you for your help in advance.
Hi,
Please open Region, under administrative -> Language for non-Unicode programs: choose Chinese.
Kate Li
TechNet Community Support -
Hello,
I just had the hard drive on my computer replaced, and the Lightroom5.7 and Photoshop cannot be sent over from the outside hard drive without an access code!! Now what do I do? Will Adobe have a record of my Lightroom3 download and my 5.7 upgrade?If you took the time to register your software on the Adobe web site, then you can log on and retrieve your serial numbers.
Find your serial number quickly
You ought to be able to retrieve the serial numbers from your first hard drive ... that requires knowing what your operating system is and if the first hard drive actually is readable.
And if none of that works ... well then I think you're way out of luck.
Might I suggest you adopt a new method of keeping track of your serial numbers, not just for Lightroom but all of your software? I suggest you create a computer text file named serialnumbers.txt, containing all of your serial numbers, stored on your computer and in a cloud backup service (like DropBox which is free) so that you will never lose it.
Maybe you are looking for
-
Hi All, we are using wlst to start the weblogic server, we use startServer( jvmArgs=args ) in wlst. it works fine if the boot.properties is in domain folder. if we put it in domain folder and execute it, the server starts fine and the script waits fo
-
HT5840 Can you change the tab name? If can, how?
Can you change a tab name?
-
Does anyone have a sample of calling the LC ES Web services using CF (8 in my case). I constantly receive the error:<br /><br />Web service operation renderPDFForm with parameters {urlSpec={contentrooturi=C:\\Adobe&applicationwebroot=http://testLCse
-
How to make editable JComboBox uppercase
Can some one tell me how to convert user entry in to a editble JComboBox to Uppercase?. Thanks.
-
"Message number 999999 reached, log is full" when generate BP comparison terms
Hi, When Generate Comparison Terms for business partner in GTS SPL, system gave a performance message " Message number 999999 reached, log is full. Message No. BL252" I tried to delete the relevant log in SLG2, but couldn't select any logs by transa