DR8-A2 Is'nt being recgonised by my system

I bought an MSI DR8-A2 a couple of months back.  I put in my computer to take to uni and when I booted the machine up, the BIOS of my computer read the drive as an ATAI$ $ DVD$RW
???    I have come home from uni and brought the drive with me and tried it in a different computer.  And I get the same thing.  Does a driver exsit for this unit that will tell windows its a DVD drive and not a CD ROM drive.
I can ocassianly read CDs but never DVDs.
Any help would be appraciate!

Quote
my computer read the drive as an ATAI$ $ DVD$RW
Quote
Its just reading the drive as a CD-ROM

Similar Messages

  • Ipod not being recognized on the system, not getting reset,retry,restore,..

    hi all
    my ipod is not being recognized on the system..
    i dont know wat is the problem
    i tried the 5 Rs thing and i didn't get any king of result..
    i dont know wat to do
    please someone who could find a solution for this please reply and send me the solutions
    thanks..
    bye.

    See this...
    Windows Does Not Recognize iPod
    btabz

  • Misspelled word in the Automated Email being sent by Workflow system

    Hi Gurus,
    First of all I'm absolutely clueless about workflow so please don't be hating. :X
    I am trying to fix a bug in one of the email templates being sent to email addresses of our employees. The subject line have a misspelled word.
    Where do I start?
    Whats the tcode to go to these templates? And how do I search for the correct email to be corrected given that the information I have is the Subject line and the body of the email.
    Points will be awarded.
    Many thanks,
    Regards,
    Olekan Babatonde

    There are several transactions you can use to check a workflow template. Depending on what you want to do you could use PFTC, SWDD or SWDD_CONFIG.
    Finding the correct task from only the subject or content is much harder. The best thing to do is run SWI1 for the period the e-mails are generated. In the list you get is a column task which holds the tasknumber. Now you need to find the step which actually sends your e-mail and get the corresponding tasknumber. Using this in PFTC and the where used function you should be able to find the workflow (WS....). Then you can use SWDD_CONFIG to change the text.
    But if the e-mail is SAP standard I would raise an OSS message and ask them to make the correction.
    Regards,
    Martin

  • Sections of report not being displayed on some systems

    Post Author: jlutz
    CA Forum: General
    Hello... strange issue... We have these Crystal 11 reports deployed that are being called via a VS .NET 2005 application.  The reports display fine on most systems, but on some systems (Dells, a few years old, 512mb of ram), sections of the report are not being displayed.  For example, on one report parts of the header are not displayed, nor is some of the subtotal sections etc.However, if they zoom to 75%, they can view the subtotal section but the header part disappears. Additionally, if they export or print the report, it comes out just fine! Any idea what could be going on here? Thanks! 

    Post Author: PeterLiebich
    CA Forum: General
    I have issues in ReportDesigner  when I have my hardware acceleration set at maximum try reducing it. Goto
    ControlPanel-> Display Properties (settings Tab) -> Advanced Button -> troubleShoot tab. I had to set my down by 4 notches before it worked. - Try setting it to none to see if it fixes your issue

  • EWA Report not being sent for two systems

    Hi Experts,
    We are having one issue in EWA Report in solution manager. Searched hard but could not find solution.
    Our solution manager is configured to provide EWA for 4 systems- ECC, BW, PI and Solution manager itself.
    The configurations are in place to the extend that we are able to view the weekly reports in Solution manager.
    Issue is -
    1. We are able to recieve mail notification for Solution Manager and ECC but not able to get for BW and PI.
    2. The ECC report is coming ok, but Solution manager report is blank.
    The places I checked the configuration -
    1. SDCCN for all systems.
    2. SOLMAN_EWA_ADMIN - all systems active and chcked for EWA
    3. Background Jobs for all systems -Maintenance Package, Refresh Session, Earlywatch Alert for Solution Manager
    4. Background Jobs related to the task including SM:EXEC SERVICES
    Later on I deleted and rescheduled the job SM:EXEC SERVICES to make sure it covers all systems.
    Data is visible in Solution Manager but report is not being sent over mail for two systems- BW and PI.
    Solution manager report is being sent but empty.
    Please suggest.
    Regards,
    Sabita

    Hi,
    what is your ST verison? check this note applicable or not
    [https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1496931|https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=1496931]
    and chek the version of your service updated ST_SER too, patch this also solve the issue
    refer this [Note 1482818 - Service updates ST-SER 701_2010_1|https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=0001482818&nlang=E]
    Jansi

  • Resetting of my password - constantly being reset by your system!

    Why am I getting a notification via my email address,  telling me I have successfully reset my password when I have not done this.  This happens on average every two to three weeks.  It is majorly annoying.  Are my settings telling it to do so automatically.   It's driving me crazy.  

    AdventureBear wrote:
    Hi,
    This may have been the way it has been on iOS since 2008 (not sure about that though), however I know (based on working in the IT industry for 20 years) that nobody on this planet can successfully argue that it would be 'acceptable security practice', for me to display 'every last letter' as I type of a secure 'root' password on my screen every day when you log in... Nobody would think it acceptable to display even their LAN/Domain password on the screen in this same manner. So why is iOS different?!
    iOS on a phone (it used to be argued) doesn't need to be very secure as it is almost entirely phone numbers and email addresses that are being stored. However in recent years when the applications got better, and tablets came out, security became a much bigger issue as more and more people started using the functions of 'smart' phones to store more 'sensitive' data.
    Kind regards,
    Andy
    Are you suggesting that someone looking over your shoulder can't see the keys that you're tapping with your fingers? In the interest of security, i would never, under any circumstances, enter a password when others are around.

  • Modifying runtime fault before being thrown by the system

    Hi,
    I have a requirement, where i need to find out the spot, from where system throws the runtime faults(specifically RemoteFault and BindingFault) in BPEL, and somehow modify the data coming in the rumtime fault (IFaultRecoveryContext object).
    Please let me know whether this is possible or not.
    I am using SOA 10.1.3.3.
    Thanks in advance.

    Try the first two steps in this article.
    Battery not charging, not being recognized, or losing charge
    If that doesn't help, I'd recommend replacing the AC adapter. If it has a problem after that, it would sound like hardware failure in the laptop.
    - Peter

  • How do i prevent my open web pages from being deleted when the system is being restarted

    windows 7
    how

    Do you mean pages that are reopened in tabs via session restore?
    * http://kb.mozillazine.org/Session_Restore
    Make sure that you do not use [[Clear Recent History]] to clear the 'Browsing History' when you close Firefox.<br />
    If you use [[Clear Recent History]] to clear the 'Browsing History' when you close Firefox then restoring tabs from the last session ("Save & Quit" or "Show my windows and tabs from last time") doesn't work.

  • User Identities being automatically disabled by System

    Greetings,
    This is a weird one. Had devices failing PEAP authentication because internal user disabled.Checked Administration > Identities > Users and sure enough user was disabled. Re-enabled, but next day same thing. Reviewed configuration logs and found that "System" was disabling the account every night at midnight.
    At first this was just one user identity but now it is affecting all.
    Doesn't affect endpoint identities, only users.
    We are on version 1.1.4 patch 2. We cannot move to a newer patch until Cisco resolves a separate issue for us.
    Thanks for any ideas, I am opening a TAC case.

    There is a setting for local accounts to expire when password has not been changed  in 60 days.  Disable the setting, or change your passwords.  Administration -->  Identity Management --> Settings --> User Password Policy.
    Please uncheck the option and try again.
    ~BR
    Jatin Katyal
    **Do rate helpful posts**

  • Ipod nano not being recognised by computer, 5th gen

    my ipod is not beng recognised by my laptop as my ipod will not turn on and is charged and is also not being recgonised by any other devices such as docking stations. It will not reset for me and have tried numerous links online, please help???!!!!

    If the iPod isn't powering on and you are positive that you are using a working USB cable and plugging the iPod into a working USB port or wall adapter, it could be a sign of some hardware issue with the iPod such as a dead battery or damaged/faulty logic board.
    B-rock

  • Field Status Group influence when Purchase Requisition being created

    Hi!
    I have a requirement from a client regarding the influence of the Field Status Group on Purchasing Documents.
    A Filed Status Group has been created in which has the CO/PP order set as Required entry for the Account Assignment.
    This Group was then assigned to a GL Account.
    When a Goods Receipt (MIGO) against a Purchase Order is entered for a GL which requires an Internal Order, the standard error message "Field Order is a required field for G/L account 0010 4105000100 " (message # F5808) appears if the Account Assignment on the PO is incorrect & no Internal Order has been entered.
    This is fine & is how the system operates as standard.
    However, the requirement from my client is to make this error message appear when a Purchase Requisition is being entered on the system, before it is converted to a PO & then receipted.
    They believe that calling the message at the point of GR is too late in the process.
    Could anyone advise on any possible BAPI, etc which could help us with this requirement??
    Thanks,
    k

    I have gone to the Tcode which has been given,
    In the first field , I have given the company code,
    in the second field , I have given  call Plant (0002)
    Validation ......how do i give the validation please let me know
    With Regards,

  • I am being plagued by that infamous "heap zone" error, can someone perform some magic and fix this for me?

    Last night I tried to save an iMovie project that was a little over 5 minutes long, minimal transistions, moderate effects, minimal text, and some pictures and music. I have been attempting to export it at 1080p to a folder on my HD but I keep getting the heap zone error. What I don't get is a week ago I was able to export a very similar project about 4 and half minutes with no problem.
    The basic specs of my Macbook Air (mid 2011 model, 11-inch running OS X 10.7) are: 120GB solid state hard drive, 4 GB of RAM, and a 1.6 GHz Intel core i5 processor. I currently have available around 13GB of storage left on the main drive, and I have an external connected (paired with Time Machine). Now, I have been researching this problem all last night and all this morning and several of the known "solutions" have not worked for me. Looking in my Activity Monitor it seems whenever I try to export this project through iMovie, the "Free" RAM just progressively drops until it hits about 450MB of RAM and then I get the heap zone error message. and while I have been able to free up about 2.5Gb of RAM prior to exporting the project, it still manages to eat up all but 400-500Mb and then gives me the error. I'm pretty lost at what to do. Here's what I've tried so far:
    - First instinct, restarted the computer
    - Closed out most of my usually running programs
    - Used the "Purge" command in terminal to free up 'Inactive' RAM (though it only free'd up a little bit, it always stops at 400Mb)
    - Downlaoded a Cache Cleaner and did a 'medium' cleaning of local and system cache
    - Turned off Time Machine
    - Tried saving to my external drive instead of the main one (so obviously it's not a storage issue)
    - Eliminated the use of special characters from the title
    - Closed all processes in the Activity Monitor that weren't vital or being run by the system
    None of those worked and I consistently got the heap zone error at the same point, about 1/10 of the way through in 'Preparing Project' Is there any other solutions to this problem? Preferrably ones that don't involve, deleting significant files or items from my drive, re-installing the OS, or any other drastic system changes because afterall my system hasn't drastically changed in the past week that iMovie WAS working so this has to be a simple fix.
    I'm really just getting annoyed and fed up with this so PLEASE someone have the right answer.

    Hi
    This is a complex Error - so this is the notes I've got - so far
    Error -108 memFullErr  Ran out of memory [not enough room in heap zone]
    Turn off - TimeMachine usually works - re-try.
    (the Application down in the Dock - not the Device)
    But this can mean many thing's - My first thought is
    • Free Space on Start-Up hard disk. How much ? (other disks do not count)
    AppleMan1958
    Are your event clips in h.264? If so, you can solve this by Right clicking on your Event Name and choose "Optimize Media". You can choose Full for 1080P or Large for 960P according to your preference.
    After you have optimized your Event, you should be able to Share with no problem.
    Lennart Thelander
    -108 mean you are running out of (free) RAM.
    Try restarting the computer just prior to sharing. That frees up RAM.
    from mynameisearl
    Final Entry
    Ok - after much cutting, trial and error and days of work I have never really established a root cause for the -108 error. Nothing I did resolved the issue to the orginal project.
    The only work around I have found is to split the Original Project into two.
    What I found was that anything around the 60 mins mark and above just failed to render in HD and showed the -108 error.
    What worked for me was creating two project files - one around 57mins long - the other a part 2 - around 17 mins long. All using exactly the same source clips, photo's, music and transitions as the orginal.
    This now works. I guess having it split in two makes it a little easier to work with as I wont have to keep rendering the first part which does not change but really wish Apple would throw some light on this.
    Anyway - I hope all of the above at least proves useful for others.
    Good Luck
    Yours Bengt W

  • IDOC to be triggerd when delivery is being deleted

    Hi IDOC Gurus:
    I want an IDOC to be triggered when we deleting the delviery. I don't know where exactly i have call my rouintes.
    When saving the delivery the VOFM routine is being called, it is 903.    However when deleting the delivery it is entering into the userexit ,  'userexit_delete' and it is not enetring into any VOFM routines i.e. it is not enteirng into routine 903.
    Here VOFM routine are being written to detrmine whether the order is being interfaced to other system or not.
    Kindy advise me where exectly i have to call my routine when delviery is being deleted.
    Thanks in advance.
    Regards
    Harikrishna

    Thanks, ALL..
    There were 2 issues:
    1. Access sequence in NACE
    2. The SAPscript wsa assigned to wrong place.
    This is now rectified.
    Quetion on the same lines (hence, on the same thread)
    1. Sales order type ZA- Delivery type- LF- Billing type F2.
    In the above case, we dont want the delivery document to be printed.
    2. Sales order type ZB- Delivery type- LF- Billing type- F2
    In this case, only when the sales order is created as ZB (this creates an immediate delivery and there is billing block, thats the difference between ZA & ZB order types.
    VV21 can be maintained with either of the below (I mean- we are flexible here)
    Shpping point
    Delivery type/shipping point
    Sales organization
    Sales Org/Delivery type
    Only in the above case, the delivery document should be printed automnatically.
    Is it possible to attain this keeping the delivery type as LF (standard itself)?
    Appreciate your earliest response.
    Regards,
    Shilpa

  • Podcast explicit tags are not being recognized

    I'm using Squarespace as my website host, and have followed their instructions to insert the iTunes Explicit tag into our feed before submitting to the iTunes store. Unfortunately, after extensive testing with Squarespace support, the tags are being read properly in the XML feed, but each time I attempt to submit via iTunes, the Explicit tag is not recognized. Any help would be greatly appreciated.
    Here is a copy of the XML output (provided by Squarespace support)
    https://img.skitch.com/20120328-t5g175qa2mf3wr3t86ay7rtmwr.png

    1. Try resetting your SMC.
    Resetting the System Management Controller >>
    2. Your laser pickup could be dirty. You can buy a cleaner disc for that.
    3. It may be the media you're using, but it nothing is recognized, it may be hardware related.
    4. Run your hardware tester.
    5. Is your optical drive being recognized in your System Profiler?
    -Bmer
    Mac Owners Support Group - Join us @ MacOSG.com
      Mac611 Mobile Mac Support - about.Mac611.com
       iTunes:MacOSG Podcast | YouTube.MacOSG.com
                       An Apple User Group 
    Have an iPhone or iPod touch? Enter Mac611.com in Safari on it for 'mobile Mac support.'

  • Thread was being aborted Exception while creating large number of Sites in SharePoint 2013

    Hi All,
    I am getting threading exception while creating a large extent of sites in SharePoint 2013. I am reading data from an excel file and then looping each row. The sites are creating for first two rows then i am getting exception. This code working fine in dev
    server but not in UAT server. I tried with changing maxRequestLength in web.config but not working. And also followed the below link.
    http://support.microsoft.com/kb/928756
    My code as follows-
    private void CreateSites(DataRow dr)
                try
                    using (SPSite site = new SPSite(OtherSiteCollection)) // I am creating sites in another site collection
                        using (SPWeb web = site.OpenWeb())
                                SPWeb newWeb = null;
                                SPWebTemplateCollection templates = site.RootWeb.GetAvailableWebTemplates(1033);
                                SPWebTemplate template = (from SPWebTemplate m in
                                                              templates
                                                          where m.Title == "SiteTemplate"
                                                          select m).FirstOrDefault(); //Here i am using custom template
        string siteName = dr["Site Name"].ToString();
                                newWeb = web.Webs.Add(siteTitle, siteTitle, siteDescription, 1033, template, true, false); //Getting exception here.
                                newWeb.Update();
                                newWeb.Dispose();
                catch (Exception ex)
                    lblMsg.Text = "Exception in create sites : " + ex.Message + ";" + ex.StackTrace + ";" + ex.ToString()
    I am getting error as-
    Exception in create sites: Thread was being aborted.;   at Microsoft.SharePoint.Library.SPRequestInternalClass.ApplyWebTemplate(String bstrUrl, String bstrWebTemplateContent, Int32 fWebTemplateContentFromSubweb, Int32 fDeleteGlobalListsWithWebTemplateContent,
    String& bstrWebTemplate, Int32& plWebTemplateId)
       at Microsoft.SharePoint.Library.SPRequest.ApplyWebTemplate(String bstrUrl, String bstrWebTemplateContent, Int32 fWebTemplateContentFromSubweb, Int32 fDeleteGlobalListsWithWebTemplateContent, String& bstrWebTemplate, Int32& plWebTemplateId)
       at Microsoft.SharePoint.SPWeb.ProvisionWebTemplate(SPWebTemplate webTemplate, String webTemplateToUse, SPFeatureWebTemplate featureWebTemplate)
       at Microsoft.SharePoint.SPWeb.ApplyWebTemplate(SPWebTemplate webTemplate)
       at Microsoft.SharePoint.SPWeb.CreateWeb(String strWebUrl, String strTitle, String strDescription, UInt32 nLCID, String strWebTemplate, Boolean bCreateUniqueSubweb, Boolean bConvertIfThere, Guid appInstanceId)
       at Microsoft.SharePoint.SPWeb.SPWebCollectionProvider.CreateWeb(String strWebUrl, String strTitle, String strDescription, UInt32 nLCID, String strWebTemplate, Boolean bCreateUniqueSubweb, Boolean bConvertIfThere, Guid appInstanceId)
       at Microsoft.SharePoint.SPWebCollection.Add(String strWebUrl, String strTitle, String strDescription, UInt32 nLCID, String strWebTemplate, Boolean useUniquePermissions, Boolean bConvertIfThere, Guid appInstanceId)
       at Microsoft.SharePoint.SPWebCollection.Add(String strWebUrl, String strTitle, String strDescription, UInt32 nLCID, SPWebTemplate WebTemplate, Boolean useUniquePermissions, Boolean bConvertIfThere)
       System.Threading.ThreadAbortException: Thread was being aborted.
       at Microsoft.SharePoint.Library.SPRequestInternalClass.ApplyWebTemplate(String bstrUrl, String bstrWebTemplateContent, Int32 fWebTemplateContentFromSubweb, Int32 fDeleteGlobalListsWithWebTemplateContent, String& bstrWebTemplate, Int32&
    plWebTemplateId)
       at Microsoft.SharePoint.Library.SPRequest.ApplyWebTemplate(String bstrUrl, String bstrWebTemplateContent, Int32 fWebTemplateContentFromSubweb, Int32 fDeleteGlobalListsWithWebTemplateContent, String& bstrWebTemplate, Int32& plWebTemplateId)
       at Microsoft.SharePoint.SPWeb.ProvisionWebTemplate(SPWebTemplate webTemplate, String webTemplateToUse, SPFeatureWebTemplate featureWebTemplate)
       at Microsoft.SharePoint.SPWeb.ApplyWebTemplate(SPWebTemplate webTemplate)
       at Microsoft.SharePoint.SPWeb.CreateWeb(String strWebUrl, String strTitle, String strDescription, UInt32 nLCID, String strWebTemplate, Boolean bCreateUniqueSubweb, Boolean bConvertIfThere, Guid appInstanceId)
       at Microsoft.SharePoint.SPWeb.SPWebCollectionProvider.CreateWeb(String strWebUrl, String strTitle, String strDescription, UInt32 nLCID, String strWebTemplate, Boolean bCreateUniqueSubweb, Boolean bConvertIfThere, Guid appInstanceId)
       at Microsoft.SharePoint.SPWebCollection.Add(String strWebUrl, String strTitle, String strDescription, UInt32 nLCID, String strWebTemplate, Boolean useUniquePermissions, Boolean bConvertIfThere, Guid appInstanceId)
       at Microsoft.SharePoint.SPWebCollection.Add(String strWebUrl, String strTitle, String strDescription, UInt32 nLCID, SPWebTemplate WebTemplate, Boolean useUniquePermissions, Boolean bConvertIfThere)
    Thread was being aborted.;   at System.Threading.ThreadAbortException: Thread was being aborted.
    Can anyone please help. Thanks!
    dinesh

    If you do this from a Console application, does it succeed?
    Trevor Seward
    Follow or contact me at...
    &nbsp&nbsp
    This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

Maybe you are looking for