Drivers for ATI HD2600 PRO not working fine on Bootcamp

Hi!
I´m installing Bootcamp drivers on my iMac (2.0 and upgrading to 2.1) with Windows Vista Ultimate 32bit. The thing is that in the device administrator, my graphic card (ATI HD2600 Pro) is named ATI HD2600XT. Also, I can see a few lines when having a white screen on my monitor, like the refresh rate was not correctly configured.
There´s any way to fix this error by downloading any aditional driver?
Thanks in advance,

Hi-
The 9800 Pro is plug and play in OS X.
Did the eBay seller state Mac compatibility?
As for testing, the card is installed and either provides video through the DVI and VGA ports or it does not.
There must be power connected to the 4 pin Molex connector on the top corner of the graphics card.
A reduced ROM card won't display an error screen if power is not connected. It won't display anything at all.
A full ROM version will display a default error screen.
*Power must be connected*.
There was an individual here recently, who bought a 9800 Pro from someone on eBay who stated Mac compatibility, but sold an unflashed, vanilla PC card. There is no picture unless the card has been flashed with Mac ROM.
If power is connected to the molex connector, and all other conditions (taping, installation, cabling) are normal, I would return the card as DOA.

Similar Messages

  • U330 wireless and bluetooth drivers for windows xp. devices not working. drivers already installed

    so i did a fresh instal of windows xp pro sp3.
    device manager shows yellow question mark and ! for Network Controller and BCM2046 Bluetooth Device. i have tried using lan to windows update, update drivers, but device manager cannot find anything.
      i have installed the 2 broadcom drivers for windows xp listed on lenovos website. i made sure that wireless switch is on, and fn+f5 wireless option is set to on as well.
    LAN shows up. and so does the 1394 on the network connections, but no wireless.
    (note: on my server 2008 os, the new windows troubleshooting instructed me to turn on a specific service, which then enabled my wireless to work.)
    however i cant seem to find a way to get the wireless to work.
    Could someone tell me all services exactly need to be enabled for the wireless to work? and why does the network controller still show up on device manager even after i have installed the drivers?
    please help, totally lost.

    Your "yellow" device is Bluetooth, not WiFi.
    Fn+F5 utility work depends on both of them, so you need all drivers to be installed before it will work.
    Install bluetooth drivers for your model. Also, your WiFI also may be Broadcom (Gemtek) and you may be trying to install Intel WiFi.
    //help will save the world

  • Fixed 30 Days calculation for any month..Not working fine when Split Occurs

    Hello Everybody,
    I am stuck with an issue..which is creating problem when there is a split..in Normal Conditions it's working fine...Kindly help me out on the same.
    We have to calculate the Salary on 30 Days fixed basis and not on calender days...
    <b>eg  For January Salary will be calculated based on 30 days and not on 31 days and for Feb also on 30 days not on 28/29 days.....</b>      Every thing is working fine for normal payroll i.e without any splits..
        <b>But if there are any splits  in the month then calculation for 2nd split goes wrong ....</b>
        Eg.  person is hired on 02feb 2007 and he got re-org on 17 feb 2007 with basic as rs.10000
      As per Clients requrement it should be calculated as  :
    for period 2nd Feb 2007 - 16th Feb 2007 : 10000 * 15/30  : Working Fine in SAP
    for period 17th Feb 2007 - 28th Feb 2007 : 10000* 14/30 :  Not Working  Properly  <b>In SAP calculation is done  as 10000*12/30</b>
    <b>We want it to calculate as 10000* 14/30</b>
    Kindly let me know wat can be done :
    1 How can i write PCR..if that needs to be change
    2. If user exit then how shall i go about the same
    if some body has any 3rd option let me know...
    Regards,
    Ketal Parikh

    Hi ,
    Solved the issue by writing rule.
    Regards,
    Ketal
    Edited by: Sikindar on Jul 3, 2010 10:28 PM

  • Downloaded drivers for the MS6570 do not WORK - HELP!

    Hello,
    I have a fresh install of Windows XP on the MS6570. I've also downloaded the drivers for the mother board from: http://www.msi.com.tw/program/support/dr...pt_dvr_list.php  
    and from:
    http://ftp://download.nvidia.com/Windows/nForce/5.10/nForce_5.10_WinXP2K_WHQL_english.exe
    Unfortunitly, everytime I run the setup program from the downloads, it begin the install process but than immediatly turns off the install, never beginning and finishing the install process. No error messages or anything. I've also just installed SP1 for Win XP from a CD I have thinking this may needed to be installed first, but still had no luck. I truely am thinking the driver downloads for the ms6570 are bad.
    Does anyone know of a way that MSI can put working drivers for the ms6570 so they can be downloaded or does anyone know of another site or can provid an FTP to working drivers?? I'm extremely desperate.
    I appreciate any info.

    I appreciate everyone's reply....
    Here is what I have done.
    I have installed a NIC on my PC, because my on board ethernet will not detect under Windows. I've also went and downloaded SP2 from Microsoft and installed that with all other critical updates. I downloaded the latest version of direct x 9.0c, and the the ms6570 diver's setup to run under win 2000.
    Still the results are the same as described above. The driver software downloaded will not run the complete install process. I've than tried to get Windows to detect and update any hardware drives that it can find from the internet and the only driver it found was for the sound card which now works.
    I appear to be with the same problem as originally described, and still feel that the drivers may be corrupted that are offered for download. Again.. I'd be happy to pay for a copy if anyone would be willing to burn me an original driver CD. I know the original driver CD does work as this is what I loaded the drivers for my motherboard in the past with.
    Thanks for any help again.

  • LJ 3600 drivers for Storage Server 2008 not working

    we have several LJ 3600 printers in our environment and would like to install these on our new server:
    Win Storage Server 2008-64-bit
    but have had no success printing with any drivers out there.
    I have certainly tried the host-based drivers
    All I ever get is a page: @PJL SET JOBATTR=JobAcct4=20110426125259...etc
    can you suggest a new driver to use?
    http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=18...
    thank YOU for any help you can offer!

    OK.
    I can't help you with the drives then.  That is out of my realm of knowledge.  If they are marked healthy and active in the disk management utility, then that is all I know that they should be indicated.
    As for the graphics driver...
    Download and install this free file utility.
    http://www.7-zip.org/
    After you install 7-zip, right click on the graphics driver file and select 7-zip from the list of options.
    Select 7-zip to Extract to: and let it extract the file into a folder.  I let it extract to the file name of the folder.
    Then just follow the rest of my instructions to install the driver. 
    Of course you will first browse to where 7-zip has extracted the folder to, and proceed from there.

  • Keyboard plugs into the back of my display does not work? but when I plug the keyboard into my MacBook Pro it works fine? is it my display Monitor?

    My keyboard plugs into the back of my display monitor it does not work? but when I plug the keyboard into my MacBook Pro it works fine? is it my display Monitor?

    Try:
    - Resetting the iPod:
    Reset iPod touch:  Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.
    - Resetting network settings: Setting>General>Reset>Reset Network Settings

  • Officejet Pro 8600 Premium error message The drivers for this device are not installed. Code 28

    Printer : Officejet Pro 8600 Premium. model CN577A
    OS : Microsoft Windows 7 Home
    Basic 64
    How is your product connected to your PC? : Network
    Problem description : In Device Manager I've got an error message with the
    Officejet pro 8600 icon - "The drivers for this device are not installed.
    (Code 28)
    There is no driver selected for the device information set or element." I
    have uninstalled and re-installed the driver to no effect. The printer
    appears to be functioning properly.
    This question was solved.
    View Solution.

    Hello, 
    Yes, i too would suggest a clean re-installation of the software.
    Regards,
    Jabzi
    Give Kudos to say "thanks" by clicking on the "thumps Up icon" .
    Click "Accept as Solution" if it solved your problem, so others can find it.
    Although I am an HP employee, I am speaking for myself and not for HP.

  • My up to date iMac can not read the lightroom 5 installation dvd I received for christmas, the dvd player works fine with other dvd's, is there a way to download the program with the dvd's serial number?

    my up to date iMac can not read the lightroom 5 installation dvd I received for christmas, the dvd player works fine with other dvd's, is there a way to download the program with the dvd's serial number?

    No need to worry about the disk version. You would just have to install an update anyway as soon as it was installed. Download from the link provided below and use the serial number you have to activate.
    Product updates

  • My lock button is not working fine for iphone5

    lock button for my iphone 5 is not working fine ....it started behaving like this since last week only.
    have restarted the phone many times. wats the solution for the same.

    Yep.
    £ 166.44

  • HT3986 I got a macbook pro Retina and I installed a windows 7. The problem is I can't find drivers for the Macbook pro retina hardware which work for windows 7

    I got a macbook pro retina and I installed windows 7. How can I get the windows 7 drivers for the Macbook Pro Retina?

    Read the Boot Camp Instructions, you have to download the drivers using Boot Camp Assistant
    If you missed that I suggest that you read the instructions again.

  • Why does the internet on my new macbook pro not work when my old macbook's does?

    Why does the internet on my new macbook pro not work when my old macbook's does? I'll have to turn the wifi off and back on multiple times to get the internet to continue to work on my Macbook Pro (running mountain lion but did it on lion also) when it runs fine on my old white Macbook (running lion). Is there something I can do to fix it or do I just have to deal with it?

    Here is your fix .. I have uploaded my properly calibrated profile get it here :
    http://www.megaupload.com/?d=YAJL6A9X
    And it should go to your user folder/Library/ColorSync/Profiles
    if you have one already you can rename either one ..
    and then go to system preferences - displays - color to select the profile .
    you will get rid of the blue tint while keeping correct color and gamma
    This is for the newer 2010 MBP's altho if same display was used might also give good results in the previous models as well . .

  • Audio device is not working, i have installed proper drivers, but audio device is not working

    hi,
    I have installed registery mechanic last week and made a system run in my laptop. After re starting my laptop, my audio devices are not working fine. I have installed the drives correctly and they are reflecting in program lists, how ever the audio device is not working. If I am reinstalled the system,  My audio device is working fine, I have installed a fresh OS, but sitll its not working fine, could you help me to fix this one.

    Tecra A8
    Model No = PTA83L-04C02N
    Can you please tell me from where I need driver so that my "Fn" key will be operation? Right now I tried to use "Fn" with F6 and F7 which suppose to change screen resolutions but nothing is happening.
    Can you please tell me if I reinstall New OS (Windows XP - Sp2) then in which order which driver and Toshiba software I should install?
    Hard to find XP drivers and utilities for that machine, Manoj. But you're in luck because the Asian part-number family PTA83L corresponds to the European PTA83E.
    Go to the European download site and look up the Tecra A8 with Short Model No. PTA83E. You'll find 40 XP drivers, utilities, and BIOS updates.
    Install the Chip Set Utility first, then the Display Driver, and then the other major drivers. Install the Common Module prior to Toshiba utilities and other programs.
    Good luck!
    -Jerry

  • After using my iPod classic in my infinity G35 a few weeks ago, I took it out of the car and it no longer works.  Just a white screen with the web address for Apple iPod support.  Worked fine when hooked up to iPod jack in car.  But wont work anywhere now

    After using my iPod classic in my infinity G35 a for the last few weeks, I took it out of the car and it no longer works.  Just a white screen with the web address for Apple iPod support.  Worked fine when hooked up to iPod jack in car.  But won't work anywhere now.  I tried re-setting but has not worked.  Any ideas would be appreciated.

    I finally resolved my problem after spending way too much time on it. I simply handed my 160GB iPod to my husband to put his fav Stones & Beatles songs on and I went back to my 80GB Microsoft Zune which has never disappointed me.
    After spending so much time trying to figure this out I did finally take it back to Apple Store who performed a diagnostic and found there was a problem with the device. They replaced it with a refurbished one which has similar issues. All I wanted to do was listen to my music. Was that too much to ask? So I am happy to be free of this problematic device. No more Apple for me!!

  • Auto To working for one material and not working for other material

    Hi,
    Hope everybody is doing fine.
    I have configured the auto TO. Its working fine for one material and not working for the other material. I checked the material master and wm 1,2 views have the same fileds / values. What could be wrong?
    I didn't setup the back ground processing job. Is that is affecting it?
    thanks for any help.
    regrads,
    KHAN

    Thnaks,
    You are right but then what could be wrong? Its working for one material and not working for otehr material? Any clue?
    Appreciate your time charlie

  • HT4260 I did everything the article suggests. And for my macbook pro it works perfectly. But all the other devices (iphone 5, 4, Macbook Air) can't connect to the network. Anybody any idea's?

    I did everything the article suggests. And for my macbook pro it works perfectly. But all the other devices (iphone 5, 4, Macbook Air) can't connect to the network. Anybody any idea's?

    Try resetting your modem. Power it down. Wait a moment, then power it up again. While it resets, do not change what is connected to it.
    In another, though unrelated article, Apple recommends the following:
    If you have configured your Wi-Fi base stations in the past, it may be helpful to do a factory default reset of each Wi-Fi base station that will be part of the wireless extended network before you begin.
    This step really ought not be considered optional for the configuration you propose. If the problem persists after resetting your modem, reset everything else too.

Maybe you are looking for