DSD Clearing Process

Dear All,
I have a problem when i want close the open items of the clients with DSD clearing. First of all, i display the shimpent and the customer in the clearing transaction, the system create a status "Clearing Possible - Create Remainde" and when i create the clearing process the system show me a error:          
The message generated is:
Automatic clearing is not allowed for company code.
This message is created when i run the /DSD/SL_CLEARDIALOG - Clearing Online transaction.
I apresure your answer.
Best Regards,
Enrique Lydna
Edited by: Enrique Lydna on Feb 17, 2011 3:24 AM

You need to enable automatic clearing for the company code concerned. Follow the following Menu path:
Logistics Execution -->  Direct Store Delivery -->  Route Accounting -->  Route Settlement -->  Collection Processing -->  Maintain Settings for Automatic Clearing
regards
Luckson

Similar Messages

  • Open Item Clearing Process

    Can anyone give a quick overview of the open item clearing process?  Also, can anyone give me an idea of the differences between F-03, FBRA, and F.13 t-codes in regards to how they work in the system?  Any limitations around what can be cleared and when?

    HI,
    f-03  you need to give one Dr and one CR (Means two doucments)
    or one Dr more CR or more Dr and one CR.
    FBRA is resetting. Means link between Invoice and payment removal.
    F.13 is mass clearing based ob74.
    Reg
    Madhu M

  • F-04 - Post with clearing : Process open items

    Hi everyone,
    I encountered issues in T-code : F-04 - Post with clearing : Process open items.
    The document header text data is not display in F-04. It is blank.
    However, when i check in FBL3N the document header text data was there.
    Pls assist on how to make the document header text data display in f-04?
    Which configuration or any other way to do that?
    Thanks.
    Best Regards,
    Joo

    Hi,
    The words of "Document Header Text" was there.
    The data/informations for the Document header text is not there.
    Pls advice.
    Thanks.
    Regards,
    Joo

  • Clearing process in SAP

    Dear Experts,
    I am quiet confused about this clearing process in SAP.
    For example a cash discount in SAP is posted with the following entry
    01 Cust a/c 15000
    40 Cash disc a/c 3000
    50 Sales or revenue a/c 18000.
    The above open item in the customer account is cleared when payment is recieved from the customer. How the G/l and cash discount account are cleared. I know tcode F-03 clears a g/l account manually when there are debit and credit line items which balance to zero . In what cases the above tcode is used?
    Appreciate if you can explain me.
    Rgds
    Komal

    Hello,
    There is no rule that each account needs to open item managed and cleared completely. There are number of accounts, you cannot maintain as open item managed. By default your customer and vendor accounts are created as open item managed.
    If every account cleared completely, then at the end of the year, you will not have any balances in your Trial Balance. In your case, for example the balances like like cash discount and sales will go to your profit and loss account and the profit or less for the financial year will be discovered.
    Let us take your example itself:
    Customer A/c Dr 15000
    Discount A/c Dr   3000
    Sales Account Cr 18000
    Now think that you have received payment from customer
    Bank A/c Dr. 15000
    Customer A/c 15000
    Presuming that you do not have any other transactions for the year.
    Your P&L Account (You have a profit of 15,000 = 18000-3000) have profit of 15000 and which will be moved to Liabilities side of your Balances sheet and against which you have 15000 bank balance.
    Hope this information clarifies your doubts.
    Regards,
    Ravi

  • Customer Clearing Process - Partial and Residual

    Hi Gurus,
    Appreciate if you can please help me in understanding customer clearing process in case of partial and residual payment. And how will it have impact on AR Aging.
    If we post customer invoice for $1000 and there is a payment of $600. Now if we use residual payment option, system should show $400 line with aging according to original invoice. But i cant see that if i go to FBL5N.
    Please tell me how it works,
    Thanks

    Hi,
    During the partial payment the new document gets created.
    You can do one thing go to table BSAD and in the invoice reference (REBZG) field enter the original document number and execute.
    You will get the residual document number (AUGBL). Check whether you are getting this document number in agewise report.
    Hope your issue has been resolved else revert.
    Regards,
    Tejas

  • Automatic clearing process for consignment liability account?

    Hi all,
    we have to manually do a FI posting to clear the consignment liability account, but there are 2000 line items, so I'm wondering if there is any automatic clearing process like GR/IR clearing ( MR11) for consignment liability account? Or can we run a program to clear this account?
    please advise.

    uncheck docs which can be cleared and try , make sure test run is on.
    try with other gr/ir as well just too see if this tcode serves  the purpose.

  • Automation of Intercompany AP/AR clearing process

    Hi
    Can you please tell me if we can automate Intercompany AP/AR clearing in ECC and if we can can you please provide the necessary guidance/configuration steps involved.
    your help is very much appreciated.
    Thanks and Regards
    RG

    Dear:
                    You can easily automate AP & AR clearing process. You will have to do the configuration in OB74 as mentioned below.
    For customer:
    Go to OB74
    Give you Chart of account, select account type D and in from and to account specify the customer number range for which you want to execute automatic clearing. Specify the criteria for clearing which is the most t important step in this configuration. You have Invoice number or billing document number for all invoices routed through SD in assignment field in ledger account in FBL5N, so specify ZUONR in first criterion. To make this criteria work you should always post your collection with reference to the billing document of invoice. I mean in F-28 or any other t code if you post payment then you should paste billing document number of the corresponding invoice in the assignment field of t code for posting DZ e.t.c . This will do the needful for automatic clearing for customers.
    For vendors
    Go to OB74
    Give you Chart of account, select account type K and in from and to account specify the vendor number range for which you want to execute automatic clearing. Specify the criteria for clearing which is the most t important step in this configuration. You have Invoice number (KR  or RE) for all invoices routed through MM in assignment field in ledger account FBL1N, so specify ZUONR in first criterion. To make this criteria work you should always post your collections with reference to the billing document of invoice. I mean in F-53 or any other t code if you post payment then you should paste billing document number of the corresponding invoice in the assignment field of t code for posting KZ e.t.c . This will do the needful for automatic clearing for vendors.
    After dong the above configuration please execute F.13 and do the automatic clearing
    Regards

  • The business requirement is invoice clearing process is automated

    Hi sap gurus can any one tell me the below process
    the business requirement is invoice clearing process is automated how is that possible in sap is there any process we need to follow

    hi,
    there is no such limitation in std SAP. but u need to check if u hve maintained limits on the max order value or if some user exit is already in place.
    saurabh

  • YE Ret Earning Roll and Clear Process produces out of balance.-MA to fix...

    YE Ret Earning Roll and Clear Process produces out of balance.-MA to fix....
    Hi,
    Our co. has 13 segments.
    xxxxx-xxx-xxxxx-xxxxx-xxxx-xxx-x-xxx-xx-xx-xxx-xxx-xxx
    ENTITY OU PRIME SUB CC PRD R DC ST NW SP STAT FUT
    As a result of our year end retained earnings roll and clear process, our stat segment (seg 12) is not balancing and rolling up to retained earnings. Our balancing segment is legal entity. Currently our countries have to perform manual entries to reclass all non 000 stat accounts back to it's original P&L account. Attempting to automate via Mass Allocation.
    Currently, working the following formula. However, unable to move from 000 to applicable stat (130 for example)
    A 03011-TTT-30100-TTTTT-TTT-TTT-T-TTT-TT-TT-TTT-TTT-TTT
    C S C S S S S S S S S S S
    B 03011-TTT-30100-TTTTT-TTT-TTT-T-TTT-TT-TT-TTT-TTT-TTT
    C L C L L L L L L L L L L
    C 03011-TTT-30100-TTTTT-TTT-TTT-T-TTT-TT-TT-TTT-TTT-TTT
    C L C L L L L L L L L L L
    T 03011-TTT-30100-TTTTT-TTT-TTT-T-TTT-TT-TT-TTT-TTT-TTT
    C L C L L L L L L L L L L
    0 03011-TTT-30100-TTTTT-TTT-TTT-T-TTT-TT-TT-TTT-TTT-TTT
    C L C L L L L L L L L L L
    Note that B and C are the same so that they basically would be a wash. I orignally had a constant (1) in both, however, it resulted in a rule violation.
    What currently is happening is a total reclass. That is, all segment 12 values moving from 30100 xxxxx 000 stat to the same. Has anyone experienced this issue? Any ideas/suggestions would be appreciated.
    Thanks,

    Hi,
    If I understand you correctly, you are trying to move balances from ONE account combination to another right?
    So, let's say, my COA is structured as
    B/S- Stat - Acct - whatever...
    And account combination
    10-000-6100-0000-000 has $100 erroneously in it and I want to MOVE the balance from STAT value 000 to 130.
    This is how to do it:
    Choose to Allocate Balances From FULL BALANCE.
    Leave Full Cost Pool Allocation check box BLANK. If you check this, you cannot use numbers in B and C lines. (See General Ledger Users Guide).
    Thus, this is what my formual should look like:
    A 10-000-6110-0000-000
    C C C C C
    B 1
    C 1
    T 10-130-6110-0000-000
    C C C C C
    O 10-000-6110-0000-000 (same as A to empty it out)
    C C C C C
    I'm not sure why you're looping. Looping is used on Parent account when you want to divide up the cost pool proportionately, say across departments.

  • Intercompany Trade clearing process

    Hello
    I am trying to understand how the clearing happens for Intercompany transactions.
    1. Intercompany config - complete and understood
    2. Reconcilation tool - complete and understood
    3. Question: how to clear up intercompany AP and AR account balances. (Clearing Process)
    I am trying to understand the clearing process in detail as I understand that Reconcilation tool (FBICR3) does assign the I/C transations but doesnt clear them.
    Thanks a lot in advance...

    Hello,
    As per standard practice for managing intra compnay or intercompnay stock transfer return, you can use the followig process;
    1.Create stock transport Purchase order and also tick mark the retrun indicator in the item overview.
    2. Now create delivery(return) with VL10B. You must have already customized delivery type and item category settings in customization
    For inter company transfer , use delivery type NCR and item cateory as NCRN
    For intracompany transfer , use delivery type NLR and item category as NLRN
    3. Goods reciept : Do the goods reciept for inventory management with movement type 101 , where as system will do the goods issue for return order with corresponding movement type 161.
    4. Post goods Issue wihch in this case will act as post goods reciept.
    Go to VL02N and do the Post Goods Issue
    With this the system posts the goods receipt in the background.
    For Cross-company-code:
    With Two-step procedure movement type is  673
    With One-step procedure  675
    The goods receipt is automatically posted with movement type 161.
    For Intra company code:
    With Two-step procedure the movement type is 671
    With One step procedure the movement type 677
    The goods receipt is automatically posted with movement type 161.
    I also suggest you please go through SAP OSS Note 430074 - Advice note plant return / store return which will help you in setting up the Stock transport returns.
    BR,
    Tushar

  • Clear process to unisntall Folio Producer Tools and go back to previous version

    Does anybody know where we can find a clear process/tutorial to uninstall the last version (v19) of the Folio Producer tools AND go back to the previous version please ?
    Because this is not clear enough to me
    "To uninstall the Folio Producer tools, do either of the following:
    In Windows, use the Control Panel (Add/Remove Programs) to uninstall the Adobe Folio Producer tools. (For older versions of the Folio Producer tools, you must uninstall InDesign CS5.5 to uninstall the tools.) "
    What does "For older versions of the Folio Producer tools, you must uninstall InDesign CS5.5 to uninstall the tools" mean ???
    Does it mean
    1: "if you got old version of FPT and want it remove, do so" or does it mean
    2: "if you want to go back to a previous version, do so" ?
    Thanks for not bashing, i just get lost ....

    Neil is right that Add/Remove Programs works to uninstall the most recent versions of the Folio Producer tools. If you have a much older version (such as v12 or v13), you need to uninstall InDesign CS5.5 to remove the Folio Producer tools.

  • Post with clearing : process open items

    hi,
    i do post and clearing FB05.
    i select incoming payment for transaction to be processed in the selection screen.
    Q1
    in the first line items, i put PK 40 for bank account and the next screen i put the amount, say 100 and hit process open items button.
    i choose the customer account and hit process open items button.
    in the standard tab, it shows list of document and also the amount entered (amount to be cleared) 100.
    now my question comes :
    as i debit bank 100 (pk 40), it should credit cust 100- (pk 15), right?
    amount entered field is showing 100 then assigned field should be 100- to make it 0 in not assigned field, right?
    but in this case, i need to select positive 100 and not negative 100 in the cust account document list.
    this is what i confused. as in f-03 or f-32, i remember if amount entered field is positive then i need to choose negative amount so that in not assigned field is 0.
    Q2
    why in first line item, if i put PK 15, i not able to process open items anymore. for example if i enter 100 and click process open items, when i put in PK 50 the same amount on the next item line, i not able to simulate correctly as with unassigned figure.
    can explain?
    thanks

    Hi
    When you select "process open items", the system lists the Open items of customer. You are supposed to select an open item to be cleared with the amount received from the customer. When you sell a product, Customer is debited and hence it is positive only.....
    I hope it is clear
    S Jayaram

  • Bank Reconciliaiton and Clearing Process of Banks in Foreign Currency

    Dear all
    Can you please help me out in this process? My client has a bank account managed in USD and his Local Currency is in EURO.
    Payments are made to a supplier in USD at an established exchange rate. The bank reconciliation (manual) is then processed on a later date with a different exchange rate - the rate in the system.
    The client is then clearing the Vendor Payments with the Bank reconciliation posting. This in turn posts a clearing document as well as a realised gain/loss on exchange. The clearing of the Payment with the invoice also takes place as a further process with a further gain/loss on exchange created. 
    The client is saying that in the case when clearing Payments with the Bank reconciliation for foreign currency the posting should not create a gain / loss on exchange.
    Can you please help? Is the process correct? They can update the foreign exchange rate in the table when posting the bank reconciliation to be more or less equal to average exchange rate of payments but this is not practical.
    Is it possible to someway define the exchange rates during manual bank reconciliation or avoid the creation of an exchange rate division?
    Many thanks
    PRG

    Hi PRG,
    When the Invoice has been made at a different rate and payments are being processed at a rate different from the Invoice, system is bound to create the additional line items for gain/loss on forex.
    One option you can look out for is in the OBY6-Company code global settings-Select the check box Indicator: No ex.rate difference when clearing in local crcy.
    Thanks
    Aravind

  • ForgeComponent.cleanDirs unable to clear "processing"

    Hi,
    We're using MDEX 6.2.2 with PlatformServices 6.1.2 on a Red Hat Enterprise Linux Server v5.7.
    We've started facing a strange problem lately. While executing a baseline, it fails at Forge.getIncomingData. It fails while trying to move a sub-folder folder from data/incoming to data/processing. On further analysis we realized that the problem is being caused by the Forge.cleanDirs method. This method is meant to clear out the input-dir, output-dir and temp-dir configured for the Forge component. However, in this case, it is unable to clear the contents of the input-dir (data\processing). When this method is called, it simply skips cleaning this directory as if it is already empty.
    We checked the permissions on this folder didn't find any issues. The 'endeca' user is the owner and even with a 777 access, this method is unable to clear it out. However, we are able to clean it manually with the same user.
    We were able to fix this problem temporarily by deleting the 'processing' folder itself and then re-creating it. It worked fine for a couple of days and then the same error resurfaced.
    This problem is present is only on one specific ITL server in our environment.
    Any pointers would be greatly appreciated.
    Thanks.
    Warm regards,
    -Adi

    Hi Rohan,
    Welcome to SDN!
    This error means that you're trying to duplicate a record on the DB... check the IDOC  number ranges... it might help
    Regards
    Juan
    Please reward with points if helpful

  • Self billing clearing process

    Hello dear all,
    Could anyone provide me the process of matching (clearing) self billing invoices/credit notes with the payments.
    I'm not expert in Self-billing process and i do not know how to create payment and the how to clear all.
    Thanks

    Wrong forum i will transfer it to Financial

Maybe you are looking for