DTP transport error after system refresh

Hi Experts,
    The scenario is that Dsystem has already refreshed data from Psystem,and then error occured when transport DTP from D to Q system.
    As per the threads before, i know that we can trace DTP technical name in table RSBKDTP.
    That i show the detail as the field from RSBKDTP in the below,
Before refresh,
System        DTP technical name     DTP original technical name
P                  DTP2                            DTP0
Q                  DTP1                           DTP0
D                  DTP0                            DTP0
After refresh P to D,
System        DTP technical name     DTP original technical name
P                  DTP2                            DTP0
Q                  DTP1                           DTP0
D                  DTP2                         DTP0
Then the transport error from D to Q caused by that the two name underlined is not corresponding.
Could anybody give me advice to solve the problem, if not ,i could only creat a new DTP in D.
I am currently trying to find an solution and I will share if I find. Thanks.
Edited by: rurupolo on Jul 15, 2010 5:20 PM

Hi Friend,
Just activate the DTP2 in D again and transport to Q. It should work.
Regards
Hemant Khemani

Similar Messages

Transports Issue after system Refresh

Hi All,
Recently we performed a system refresh from our Production to Development system. It is SAP ERP 6.0 ehp5 system. The refresh was successful however we are seeing issues related to STMS.
1. In our development system we are unable to use SCC1 to move transport from one client to another. The following is the dump.
Category               ABAP Programming Error
Runtime Errors         UNCAUGHT_EXCEPTION
Except.                CX_SDB_ORA_PROGRAM_ERROR
ABAP Program           CL_SDB_ORA_UPDATE_STATS=======CP
Application Component BC-DB-ORA-CCM
The occurrence of the exception is closely related to the occurrence of
a previous exception "CX_SQL_EXCEPTION", which was raised in the program
"CL_SQL_STATEMENT==============CP",
specifically in line 24 of the (include) program
"CL_SQL_STATEMENT==============CM008".
The cause of the exception was:
ORA-20003: Specified bug number (16470836) does not exist#ORA-06512: at
"SYS.DBMS_STATS", line 23922#ORA-06512: at "SYS.DBMS_STATS", line
23973#ORA-06512: at line 1
2. We are not able to see the sub request record for the transports is missing in E070 table for the TRs which were created before refresh.
Please provide your inputs and help us to resolve these issues.
Thanks!

Hi
Why do you mean by "system refresh from our Production to Development system"
DB copy or client copy ?
Based on the problem you have it must have been a DB copy.
As you might know this is not recommended by SAP, you should at least have exported the object versions as stated in the here under note.
I hope your TMS domain controller was the production system...
It is normal that you did loose data in the CTS tables as you overwrite all CTS tables with the data from production, thus orders created in DEV that were not released should have been erased.
I'm afraid your problem could be tougher than a simple Oracle error...
For the Oracle error could you try launching system statistic and see if you get the same error
brconnect -u / -c -f stats -t system_stats
Why did you perform that refresh, client copy could have been a safer alternative.
Regards
130906 - How can versions be transported?
You want to copy the versions of the repository objects from one R/3 system into another, for example because you are planning to copy your production system to your development system.
Such a procedure does not correspond to the strategy recommended by SAP, to always retain the development system.

Portal Runtime Error after System Refresh

Did a system refresh and now when I select a BI workbook that executed before the refresh I receive the error
"portal runtime error
an exception occurred while processing your request
exception id:09:27_07/02/11_0018_2780350
see the details for the exceptio id in the log file".
Queries run without erroring only the workbooks give this error... apprecitate any help - thanks

Hi Annette,
Did you clear all the cache, closed the browser and try again?
If the error still appears, check the error log.
Where are you checking the BI workbook? Is it through portal is it through an iview? If yes then check if the
application runs when the iview is previewed directly.

Getting RFC error After system Refresh

HI Gurus,
Recently our SRM QA client was refreshed from Prod and all the RFC connections are pointing to R/3 Production client instead of R/3 QA Client. Because of this reason we are unable to replicate the Product ID's from R/3 to SRM. Also all the attribute values are showing the source sustem as Producion instead of QA R/3.
We have verified the following and everything looks good.
1. Table CRMMLSGUID - R/3 logical system as QA R/3.
2.We ran the report RHOMATTRIBUTES_REPLACE for the attribute SYS but.no update.
3.SPRO u2192 Supplier Relationship Management u2192 SRM Server u2192 Technical Basic Settings u2192 ALE Settings (Logical System) u2192 Distribution (ALE) u2192 Basic Settings u2192 Logical Systems u2192 Define Logical System.
4.SPRO -->Supplier Relationship Management -->SRM Server ->Technical Basic Settings ->Technical Basic Settings.
5. SPRO ->Supplier Relationship Management -->SRM Server ->Technical Basic Settings ->Define Backend System for Product Category.
Your response is highly appreciated.
Thanks,
Sada.

Hi,
After refresh to QA, there may be refresh fpr RFC users.
Please check
a)RFC Users with Pwd are exists , if not create new.
b) Maintain those users /pwd/client in SM59.
Hope this will work for it.
Rahul Mandale

Rebuilding Domain controller & Transport Routes after system refresh

I have refreshed Dev from Prdn, now my domain controller only shows single system
I have documentation but, it is confusing to me how to have QAS and Prdn join the domain controller again and show the domain as a three tier system
When I log into QAS and Prdn I still see the old 3 tier system including the domain and the other systems.
Please advise
maria
Edited by: Maria Graziano on Mar 27, 2008 3:53 PM

You don't perform backup of domain controller.
You only designate in STMS one of servers as "Backup Domain Controller"
when Primary controller fails than "Backup domain Controller" takes his role and becomes a primary.
So action to refresh domain controller is:
1. Designate one of servers as backup domain controller
2. Backup transport directory if it is on refreshed server (just in case)
3. Switch backup controller to become primary
4. Refresh primary system
5. Join refreshed system to domain
6. Switch back primary function to refreshed server
Regards,
Wojtek

SAP License issue after system refresh.

Hi,
After system refresh, refreshed system has License info of source system. When trying to apply license from unix, it gives below error, saying system number is incorrect to apply new license. Looks the system number of source system is causing issue. I checked, there is no data in MLICHECK table. I could see some info in "saplikey" table. System is 700 system.
sidadm> saplikey -install "/home/SID/sid_multiple.txt pf=/usr/sap/SID/SYS/profile/SID_DVEBMGS01_sapsidci
This system's system number is "000000000710287641", but there is a license key
for system number "000000000711311441" in file "/home/SID/sid_multiple.txt".
sidadm>
Thanks.

First check whether you have deleted all invalid licenses?
use below command to delete invalid licenses
sidadm>saplicense -delete
And apply new license based on new hardwarekey with below command
sidadm>saplicense -install
*I think there should be some invalid licenses lying in your system
Regards
Nick Loy

After System Refresh Variants missing

Hi,
We have used Export / Import method to build QAS system from production
ABAP export file.
After System refresh we got the same Production client with all
configurations, Variants, Object including data.. Which is Perfect.
But, as per our business we don't want to use the same production
client number in Quality System., so we done Cliet Copy to copy to
different client (ex: Client 200) using SAP_ALL profile.
Question: But after client copy we found that some Data, Objects,
Variants are missing in the new client (200).
Ex: In Client 100 (Copy of production client) table T009 is having 10
entries, but after client copy in client 200 the same table doesn't have any
entry in that including standard and Z.
Please help me on this, how do I get clone / copy of 100 client
(original client)
Thank You,
Ramesh

Hi Ramesh,
Looks like your client copy didn't bring all the data and Objects, Did you checked logs, Is there any error message ? The client copy completed with all the tables ?
You can try Remote client copy method .
You can manually export the variants from the source client to Target client and you need to export the Variants from the table VARID, VARI, VARIT and VARIS.
You can use the below forum procedure to export and import variants.
how to export RFC destination to file in order to import it in an other sys
Since, not only the variants you are missing data and Objects, I would suggest for re-copy the client.
Regards,
Arjun

Logical System Conversion after system refresh failed

Hello,
Logical System Conversion after system refresh couldn't complete as the printer was locked. This job was run in the background. In SM37, the job log of RBDLSMAP shows as job finished, but it took only 40 seconds. Now I see that the logical system got changed(Converted) in the client settings scc4 but I know that this client being a production client and would run for couple of hours. Here is the job log information.
02/18/2009 16:09:33 Job started                                                                     00           516          S
02/18/2009 16:09:33 Step 001 started (program RBDLSMAP, variant &0000000000000, user ID ABCD)      00           550          S
02/18/2009 16:09:33 Output device PRN1 is locked in the SAP system                                  PO           349          I
02/18/2009 16:10:19 Job finished                                                                    00           517          S
When try to rerun bdls again, it shows that it is already available and it says "The new logical system name is already assigned to the current client".
Any suggestions on this?
Thanks,
Mahesh

Hi ,
Rerun the BDLS again as this took very little time.
When you try to run again it popsup message saying it already exists just delete that and again put the Logical system name and run it will run that time.
May be while scheduling the job you gave for spool I am not sure why is it looking for Printer which is locked.
Thanks.

IDOC Tables with Errors Post System Refresh

Hi Everyone,
Is there any Report or other way through which one can get List of IDOC Tables with Errors Post System Refresh.
Thanks,
Regards,
- Ishan

Hi,
While selecting the Infopackage to run the INIT load, it is taking me to the ECC login screen. Once i enter my credentials, its showing a dump with the message:
Short text of error message:
No RFC authorization for user XXXXX ( RSA8 ).
Long text of error message:
Technical information about the message:
Message class....... "RSAR"
Number.............. 051
Variable 1.......... "No RFC authorization for user XXXXX ( RSA8 )."
Variable 2.......... " "
Variable 3.......... " "
Variable 4.......... " "
Please advice.
Regards
sneha

DTP are inactive after System copy

Hi Guys!!!
I have done a system copy from one sbox another. After that all the DTP are inactive after System copy.
Please help me in this regard.
Thanks in advance
Peter..

Hi,
If u copy the transformation get inactive, bcoz it has changed from existing target to new target.
so need to activate all.
Hope it helps u,
Thanks

Adding transports to import queue after System Refresh

Hello All,
Every time we do system refresh from PRD to Sandbox as a part of post refresh activity we need to import all the transports which are in the import queue of PRD(which are not yet imported to PRD) to our Sandbox.
But its a tedious job, as in the import queue many old transports which are still not yet imported to PRD will b there.
So may b around 150+ transport requests in the import queue of PRD, which we need to add those manually from path
Extras---->other requests -
> Add. doing same for 150 times. cant even imagine dat work.
So my question is, Is there any way to get the replica of import queue of PRD to Sandbox.
Some where i read like transport buffer in the path /usr/sap/trans/buffer/<SID> of the system will have list of all transports in the import queue.
So can i copy dat file and replace SID with Sandbox SID and place it in the Sandbox under same path.
Please suggest or give me a correct solution.
Regards,
Ravi

Thanks a lot for your reply.
I had read about using script like tp addtobuffer inorder to add the transports to the import queue some time back.
But forwarding transports is a new method i got to know here which even looks easy too. It would be great if any 1 tell me how forwarding works.
Also it would b fine if who all uses this method of forwarding to add transports to import queue do reply about any problems faced while forwarding requests.
Bcoz in our landscape , transport route is as below
Dev to QA and Sandbox then from QA transports will move to Production.
So after refresh forwarding Transports from PRD to Sandbox, how does this work. Please share your suggestions.
Regards,
Ravi

Error in collecting transfer Rules in transport request after system copy

Hello,
Recently we had a system copy from Production to Test system.
We are trying to collect all the transfer rules from production in the transport request with the procedure which is given in the below link.
Re: Q: Transfer Rules after system copy
When we are trying to transport such objects, system first prompt for transportable workbench request, after specifying request once, it prompts for it again and after providing transport request number system results with message u201CSpecify a requestu201D.
Please suggest how to overcome this issue.

thats scary that you are copying your transfer rules from production to test system well if you guy sare doing it good luck..
a part from that make sure your prd is open so it allows items to be able to transport an dthere is a conenction between prd to test for transports to go through
if you have already copied all te data source to TEST, replicate them IN BWQ( your test system) then send over tranfer fules .
hope that helps.

Restore SECSTORE security store after system refresh?

When we refresh a QA system from PRD, we first export the RFCDES table from QA, then perform the homogeneous system copy from PRD -> QA, and then import the RFCDES table we saved prior to the copy. This restores the various RFC destinations in the QA environment.
In recent releases, the password information has been moved out of the RFCDES table into the Secure Store; it looks like this is based on tables RSECTAB and RSECACTB. However, when we transport the contents of these tables and then bring them in again after the refresh, the RFC destination passwords are still marked invalid.
Has anyone refreshed a QA system while saving the RFC destinations, using the secure store? If so, how?
Thanks,
Rich

Hi ,
As an initial check , please check for error/informaiton on Kernel.
OSS notes 816861 & 522536 will help you.
Regards
Nagaraju

Windows 8.1 will not activate on HP19-2113w after system refresh.

Everything was working fine on my PC. Then the other day it crashed and said there was a disk error and that it had to scan the whole drive to find the error. It finished scanning, but windows 8.1 would not load sucessfully. Therefore I did a system refresh thru HP recovery. After doing that windows would start up normally, but I lost my activation. When I tried to activate the response was "Key doesn't work try again later" or something like that. Kept trying, no luck. I thought it may have been an error with the system refresh, so I did the total system reset (after saving personal data). Now I am having the same problem with activation, and If I try to navigate the normal way to the activation screen, the screen disapears. I can get to activation using command prompt. but key still does not work. The key I am using I retrived from my BIOS data. Also, I ran the refresh and reset from the origional hard drive partition. I hope someone has a solution to this. Thanks is advance Bill

Hello , Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More. I have read your post on how your desktop computer will not activate after performing a system refresh, and I would be happy to assist you in this matter! In order to correct this issue, I suggest following the steps in this resource on Windows 8 product activation, which should help to activate Windows 8.1 on your system. Please re-post with the results of your troubleshooting, and I look forward to your reply!
Regards

Table structure changed in testing system after system refresh.

Hi Team,
Recently we underwent a system refresh in Testing System where the Testing data is filled with Production data. But now we find that in one table some fields which we had deleted they are again found there. The version history of table is also gone. The table object was under testing in testing system and after which it was supposed to be transported to production. I believe System refresh only means refresh of data and it has nothing to do with table structure. Please correct me if I am wrong. Please also let me know what could be the reason of those changes in table if it is not System Refresh.
Regards,
Amit

I believe System refresh only means refresh of data and it has nothing to do with table structure.
Alas, you were wrong, after all table definition are data too, as program sources...
You have to re-import every transport request which was not yet transported to production in your test system.
Regards,
Raymond

DTP transport error after system refresh

Similar Messages

Maybe you are looking for